EUREKA SURV 68 BALLAST PUMP SYSTEMS
|
|
- Tamsyn Newman
- 7 years ago
- Views:
Transcription
1 Part of EUREKA SURV 68 BALLAST PUMP SYSTEMS Keep going. Keep safe.
2 RELIABILITY THROUGH EXPERIENCE FPSO, Semisubs KRISTIN, STATOIL ICHTHYS, INPEX SNORRE B, STATOIL VISUND, STATOIL GJØA, STATOIL NJORD A, NORSK HYDRO TROLL C, NORSK HYDRO ÅSGARD B, STATOIL MORE THAN 1500 EUREKA PUMP UNITS delivered to the oil & gas market in 40 years 2
3 EUREKA SURV 68 BALLAST PUMP - The safe choice offshore The Eureka SURV 68 Ballast Pump is a vertical single stage API610 centrifugal pump direct driven by a water filled electrical motor designed for both dry and flooded operation. The pump is equipped with a single mechanical seal, a self-priming unit and an internal cooling arrangement for the motor. The complete unit is designed to IP68 for dry operation and submerged conditions in an emergency situation. Main features and benefits: Designed for both flooded and - dry operation Full API 610 design Vertical arrangement Side-side or In-line nozzle - arrangements 4 times API 610 nozzle forces Maintenance free sleeve bearing - in non drive end Self-priming solution Low noise solution available Simplified ballast operations IP68 certified tested with 17 - degree tilt in 60 m submergence The Eureka SURV 68 Ballast Pump is CE marked, ATEX certified and compliant to all major oil company specifications. 3
4 EUREKA SURV 68 BALLAST PUMP -For smaller capacities The EUREKA ballast pump is a heavy duty single stage, single suction, vertical in-line centrifugal pump in compliance with the latest edition of API 610 and well suited for layout restricted areas. It is designed for continuous duty and is particularly suitable for offshore applications, pumping fluids over a wide range of temperatures and pressures. The rotor, motor and cover can be removed from the pump casing as a complete unit without disturbing the main piping. In general the pump materials comply with the grades listed in API610 and NORSOK M630/M650. For seawater application, the standard materials are 25% Cr Super Duplex (API610 D2). Case and cover The pump is radial split with the casing and nozzles integrally casted. The cover contains the seal chamber and is designed to carry the motor. Flanges Suction and discharge nozzles are furnished with 300 lbs ANSI B16.5 RF flanges as standard. Shaft and mechanical seals The pump impeller is axially fitted to an extended motor shaft and is designed to facilitate a single mechanical seal according to API610 and API682. Impeller and wear rings The impeller is single suction and axially balanced. It is designed with a large eye area to ensure low NPSH capabilities, and thus reduce the possibility of cavitation. The impeller wear rings are mounted on the impeller with a slight shrink fit and pinned in position. The case wear ring and cover wear ring are inserted in the case and cover with a slight interference fit and secured with a hollow head set screw. Bearings There are no bearings in the pump. The bearings in the motor are carrying the pump rotor. Electric motor The driver is resting on the cover. The Eureka ballast pumps are for this application delivered with IP68 wet wound electric motors that can allow full flooding of the pump and still be in full operation. HYDRAULIC RANGE Capacity: Differential pressure: Design pressure: m3/h 2-20 bar 40 bar 4
5 EUREKA SURV 68 BALLAST PUMP -For larger capacities The EUREKA ballast pump is a heavy duty single stage, double suction, double volute, vertical in-line or side-side centrifugal pump in compliance with the latest edition of API 610 and are well suited for layout restricted areas. It is designed for continuous duty and is particularly suitable for offshore applications, pumping fluids over a wide range of temperatures and pressures. The rotor, motor and cover can be removed from the pump casing as a complete unit without disturbing the main piping. In general the pump materials comply with the grades listed in API610 and NORSOK M630/M650. For seawater application, the standard materials are 25% Cr Super Duplex (API610 D2). Case and cover The pump is radial split with the casing and nozzles integrally casted. The cover contains the seal chamber and is designed to carry the motor. Flanges Suction and discharge nozzles are furnished with 300 lbs ANSI B16.5 RF flanges as standard. Impeller and wear rings The impeller is double suction and axially balanced. It is designed with a large eye area to ensure low NPSH capabilities, and thus reduce the possibility of cavitation. The impeller wear rings are mounted on the impeller with a slight shrink fit and pinned in position. The case wear ring and cover wear ring are inserted in the case and cover with a slight interference fit and secured with a hollow head set screw. Bearings There is a radial bearing on the pump non drive end. This is a seawater lubricated sleeve bearing. There is no thrust bearing in the pump. The thrust bearing in the motor is carrying the pump rotor. Electric motor The driver is resting on the cover. The Eureka ballast pumps are for this application delivered with IP68 wet wound electric motors that can allow full flooding of the pump and still be in full operation. Shaft and mechanical seals The pump impeller is axially fitted to an extended motor shaft and it is designed to facilitate a single mechanical seal according to API 610 and API682. HYDRAULIC RANGE Capacity: Differential pressure: Design pressure: m3/h 2-20 bar 40 bar 5
6 PUMP ACCESSORIES - The Eureka SURV 68 Ballast Pump is fitted with various accessories Priming unit The main function of the self-priming unit is to prevent the pump from starting/running when air has entered into the ballast pump system. The priming system consist of an air driven ejector, priming tank, one solenoid, and one pneumatic actuated on/off valve. Upon given start signal, the ballast priming system will prime the ballast pumps until the priming tank level transmitter is activated. Junction boxes Main terminal- and instrumentation junction boxes are ATEX certified with IP68 design for flooded operation. Heat exhanger The wet electric motor is cooled by a plate heat exchanger in titanium for normal pump room dry operation. The cooling water is taken direct from the pump discharge nozzle with return to pump suction. Instrumentation The wet electric motor is protected by temperature monitoring and dry running sensors. The ejector tank is equipped with level transmitter. Mechanical seal Both pump and motor is fitted with single mechanical seals. 6
7 EUREKA SURV 68 BALLAST PUMPS Operations Support Services EUREKA PUMPS has 40 years of experience with pump systems, including: engineering, production, maintenance, upgrading, testing, optimization programs and operational services (international and for the Norwegian Continental Shelf). The Operations Support Services Department has engineering capabilities focused specifically at providing Clients with added value solutions to pumping problems. This is an objective borne out of an overall strategy to reduce pump life cycle costs (LCC). It is our experience that forms our working methods and our capability to cost optimize clients operation. The purpose built service and test centre in Stavanger will service the large installed base which consist of more than 1500 pump units. EUREKA PUMPS use a newly modified measuring - and analysing system based on Norconsult s well established Impuls. This system has been used over many years for verification of water power plant and pump systems. The system will simultaneously measure, analyse and report pump curves and vibration data. A total of 16 general channels/measuring points are available under testing. This utility also allows for measurement of other parameters, such as temperature, strain, etc. The testing can be witnessed on-line via internet from the customer s office. All pumps are serviced with original spare parts and can be witnessed tested at site or online prior to shipment. The Test Facility In connection with the service centre, EUREKA PUMPS has a test facility specially designed to test centrifugal pumps according to ISO 9906 and API 610. All the pumps delivered by EUREKA PUMPS is hydrostatic and performance tested prior to shipment. Witnessed string testing is provided, including NPSH test and functional acceptance testing. IP68 certified submerged test with 17 degree tilt. 7
8 Part of 0130 EUREKA PUMPS AS is a Norwegian pump supplier with more than 40 years of experience in the oil & gas and marine industry, offering a range of pumps and generator sets that covers a majority of applications. EUREKA PUMPS supplies to new builds and offers services for upgrading, modification, equipment testing, installation and commissioning. EUREKA PUMPS is a market leader among companies operating on the Norwegian Continental shelf, and it is also present in International markets with selected applications, based on own technology. EUREKA PUMPS main office is in Oslo (Lysaker), Norway, and has offices and advanced service facilities along the Norwegian coast. EUREKA PUMPS also has offices in Houston St. Johns, Busan and Kuala Lumpur. EUREKA PUMPS is one of five companies in the ALIGN group, a leading supplier of production equipment and safety critical products and solutions. ALIGN offers services ensuring continuous production, a perspective that safeguards optimal operations and lower life-cycle costs. The ALIGN group is owned by Converto Capital and HitecVision. EUREKA PUMPS AS Agent Hammerfest Kristiansund Mongstad N Stavanger Oslo St. Johns France Houston Busan Kuala Lumpur Rio Tel EUREKA PUMPS AS P.O. Box 229, NO-1326 Lysaker, Norway Oksenøyveien 10, NO-1366 Lysaker, Norway
Vertical Pumps for the Oil & Gas Industry
Vertical Pumps for the Oil & Gas Industry ITT API Expert ITT Commitment ITT is committed to the Oil and Gas market, which is the largest segment of our business. We have been investing in technology to
More informationOil & Gas. CHTR Centrifugal, High-pressure, Multistage Barrel Pump to API 610, 10 th Edition.
Oil & Gas CHTR Centrifugal, High-pressure, Multistage Barrel Pump to API 610, 10 th Edition. 2 Introduction CHTR Reliable delivery at high pressure. Day in and day out, KSB pumps prove their worth again
More informationOHV / OHVL Type OH3 Vertical Inline Pumps ISO 13709 (API 610)
OHV / OHVL Type OH3 Vertical Inline Pumps ISO 13709 (API 610) The Heart of Your Process OHV / OHVL Type OH3 Vertical Inline Pumps ISO 13709 (API 610) OHV OHVL OHV/OHVL Sales Presentation slide
More informationdp pumps the dynamics of water HVAC centrifugal (norm) pumps
dp pumps the dynamics of water HVAC centrifugal (norm) pumps 2 HVAC centrifugal (norm) pumps HVAC efficient solutions for comfortable living conditions To be comfortable in a building, both at home and
More informationCENTRIFUGAL PUMP OVERVIEW Presented by Matt Prosoli Of Pumps Plus Inc.
CENTRIFUGAL PUMP OVERVIEW Presented by Matt Prosoli Of Pumps Plus Inc. 1 Centrifugal Pump- Definition Centrifugal Pump can be defined as a mechanical device used to transfer liquid of various types. As
More informationHeavy Duty Process Pumps
Heavy Duty Process Pumps API 6 / ISO 13709 Oil & Gas Hydrocarbon Processing COMPANY PROFILE TM.P. S.p.A - Termomeccanica Pompe belongs to Termomeccanica S.p.A, a holding company involved in various business
More informationFire Protection Pumps
Experience In Motion Fire Protection Pumps Pump Supplier to the World Flowserve is the driving force in the global industrial pump marketplace. No other pump company in the world has the depth or breadth
More informationSJT / SJM / SJP Large Vertical Pumps
SJT / SJM / SJP Large Vertical Pumps The Heart of Your Process SJT, SJM, SJP Large Vertical Pumps Product Overview SJT Turbine Ns 1800 < 5000 nq 35 < 110 SJM Mixed Flow Ns 5800 < 8300 nq 113 < 161 SJP
More informationRules for Classification and Construction Additional Rules and Guidelines
VI Rules for Classification and Construction Additional Rules and Guidelines 5 Pumps 1 Guidelines for the Design, Construction and Testing of Pumps Edition 2007 The following Guidelines come into force
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y SOLAR POWER MARKET. Concentrated Solar Thermal Power
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y SOLAR POWER For more than 60 years the name Ruhrpumpen has been synonymous worldwide with innovation and reliability for pumping technology Ruhrpumpen
More informationSUPER-TITAN. Split-case pumps with power, performance and reliability for a world of applications
SUPER-TITAN Split-case pumps with power, performance and reliability for a world of applications The Prestige. The Performance. SUPER-TITAN PUMPS Features The TKL Super-Titan pump makes a significant contribution
More informationVERTICAL TURBINE AND PROPELLER PUMPS
VERTICAL TURBINE AND PROPELLER PUMPS INTRODUCTION Vertical Turbine and Propeller Pumps Model 7000 Series Turbine Pump Model 800 Series Axial Flow Propeller Pump Model 800 Series Mixed Flow Propeller Pump
More informationIMPORTANT SAFETY NOTICE
IMPORTANT SAFETY NOTICE To: Our Valued Customers User safety is a major focus in the design of our products. Following the precautions outlined in this manual will minimize your risk of injury. ITT Goulds
More informationGoulds AF. Axial Flow Pump
Goulds AF Axial Flow Pump Goulds AF The Industry Leader in Circulating Pump Technologies Fabricated design 42-66 (1050-1600 mm) (shown with optional spring mounted base) Cast design 6-36 (150-900 mm) Goulds
More informationHORIZONTAL PUMPING SYSTEM
HORIZONTAL PUMPING SYSTEM BORETS U.S. INC. PERFORMANCE TECHNOLOGY INNOVATION Horizontal Pumping System What is HPS? HPS classification, Pumps, Stages, Impellers, Curves/Performance, Components Why use
More informationIndustrial Process Pump Safety Manual IMPORTANT SAFETY NOTICE
Industrial Process Pump Safety Manual IMPORTANT SAFETY NOTICE To: Our Valued Customers User safety is a major focus in the design of our products. Following the precautions outlined in this manual will
More informationMULTISTAGE CENTRIFUGAL PUMPS
MULTISTAGE CENTRIFUGAL PUMPS MULTISTAGE CENTRIFUGAL PUMPS TK - TKR - VTK - TKK series TK-VTK-TKR-TKK are high pressure multistage pumps. Connection to the driving machine (generally an electrical motor)
More informationVertical selfpriming Side-Channel Pumps Type WPV
Vertical selfpriming Side-Channel Pumps Type WPV FIELD OF APPLICATION The side-channel pumps are selfpriming and operate more economically (better efficiency) than normal centrifugal pumps when handling
More informationFlygt N-Pumps 3085, 3102 & 3127. For reliable and efficient wastewater handling
Flygt N-Pumps 3085, 3102 & 3127 For reliable and efficient wastewater handling The Concept Flygt N-Pump series Reduced pumping efficiency, high energy and maintenance costs shouldn t be a fact of life
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationFAIRBANKS NIJHUIS FIRE PUMPS. www.fairbanksnijhuis.com
FAIRBANKS NIJHUIS FIRE PUMPS www.fairbanksnijhuis.com FAIRBANKS NIJHUIS Long established as a leading fire pump manufacturer, Fairbanks Nijhuis offers a broad range of horizontal and vertical split case,
More informationPUMP VIBRATION STANDARDS GUIDELINES
EUROPEAN ASSOCIATION OF PUMP MANUFACTURERS ASSOCIATION EUROPÉENNE DES CONSTRUCTEURS DE POMPES EUROPÄISCHE VEREINIGUNG DER PUMPENHERSTELLER PUMP VIBRATION STANDARDS GUIDELINES First edition - 15 July 2013
More informationALIGNMENT. Pump and Driver Alignment
ALIGNMENT Pump and Driver Alignment Alignment Subject: Pump and Driver Alignment In the pump business alignment means that the centerline of the pump is aligned with the centerline of the driver. Although
More informationMEMBRANE VACUUM MINI PUMPS
MEMBRANE VACUUM MINI PUMPS The mini pumps described in this page are membrane-type. They can be used both as vacuum pumps and compressors. In the latter version they can supply compressed air 100% oil-free
More informationPumps for Pipelines and Transportation
Engineering Flow Solutions Pumps for Pipelines and Transportation API 610 / ISO 13709:9 Midstream The main volume of the oil transit accounts for the pipeline transport. Around 97% of produced oil is
More informationPump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling
Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling 250_P1 R10/7/2015 Copyright 2015 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
More informationModel 362A AURORA. 340A/360A Series SINGLE STAGE END SUCTION PUMPS. www.aurorapump.com
Model 62A MODEL 41A MODEL 44A AURORA 40A/60A Series SINGLE STAGE END PUMPS www.aurorapump.com SINGLE STAGE END PUMPS AURORA 40A/60A Series Single Stage End Suction Pumps Capacities to 4500 G.P.M. (1022
More informationQL Series Vertical, Double-Suction, Twin-Volute Turbine Pumps
QL Series Vertical, Double-Suction, Twin-Volute Turbine Pumps QL QLQ QLC QLQC Experience In Motion Pump Supplier To The World Flowserve is the driving force in the global industrial pump marketplace. No
More informationInline Pumps Type NCV / NCVL
Inline Pumps Type NCV / NCVL General The DICKOW-Inline-Pumps, series NCV / NCVL, have been developed for the chemical, petrochemical and related industries. Since the pumps are installed inline, only a
More informationPump Division MNR MND. Absorber Recirculation Pumps. Bulletin PS-10-32 (E)
MNR MND Absorber Recirculation Pumps Bulletin PS-10-32 (E) Pump Supplier To The World Flowserve is the driving force in the global industrial pump marketplace. No other pump company in the world has the
More informationNozzle Loads, Piping Stresses, and the Effect of Piping on Equipment
Nozzle Loads, Piping Stresses, and the Effect of Piping on Equipment By Patty Brown & Mark van Ginhoven November 13, 2009 1 CA 2009 Fluor Corporation. All Rights Reserved. Topics Covered Introduction Nozzle
More informationTubular Casing Pumps. The Driving Force in Your Cooling Water System
Tubular Casing Pumps The Driving Force in Your Cooling Water System KSB know-how,experience and service... More than 120 years tradition in the design and construction of pumps, valves and relevant systems
More informationH i g H E n E r gy, M u lti-stag E, D i ffu s E r type, Bar r E l Cas E, B Oi le r fe E D pu M p
CUP-FK High Energy, Multi-stage, Diffuser Type, BARREL CASE, BOILER FEED PUMP SPX - An introduction SPX is a Fortune 500 multi-industry manufacturing leader, headquartered in Charlotte, North Carolina.
More informationVogel - Multistage Pumps Design MP, MPA, MPB, MPV Sizes DN 40 - DN 125
Vogel Pumpen Vogel - Multistage Pumps Design MP, MPA, MPB, MPV Sizes DN 40 - DN 125 1 Performance range: Capacities up to 340 m 3 /h (1500 USgpm) Head up to 500 m (1640 feet) Max. speed up to 3600 min
More informationSIRIUX. SINGLE AND DOUBLE HIGH EFFICIENCY CIRCULATORS Heating Air-conditioning OPERATING LIMITS APPLICATIONS. 28 m 3 /h* Heads up to: Flows up to:
OPERATING LIMITS Flows up to: m /h* Heads up to: m C Max operating pressure: bars Temperature range: - à + C Max ambient temperature: + C ND of orifices: à * m /h: parallel operation SIRIUX SINGLE AND
More informationPump Specifications 2448LSG, 2448LSGX Series Omnivore 2HP Simplex Grinder Packages
Pump Specifications 2448LSG, 2448LSGX Series Omnivore 2HP Simplex Grinder Packages 2448LSG_P1 R4/2/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
More informationPump and Valve Components and Maintenance
Pump and Valve Components and Maintenance Outline: 1. Split case and End Suction pumps, industry in the 21 st century, cost of ownership, and performance tips 2. Split case Pumps features, maintenance,
More informationSIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS 426 2.98 12.06
SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS LV SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: sigmahra@sigmahra.cz
More informationMultistage high-pressure multistage centrifugal pumps
Series description Wilo-Helix V 2 4 6 8 Wilo-Helix V 19-27 7 6 6 Hz - North America 22 2 18 5 16 14 4 12 3 1 V 1 V 19 V 27 8 2 6 1 5 1 15 2 25 3 4 2 35Q[US gpm] H[ft] H[m] Design Vertical multi-stage,
More informationTOPIC: 191004 KNOWLEDGE: K1.01 [3.3/3.5] Which one of the following contains indications of cavitation in an operating centrifugal pump?
KNOWLEDGE: K1.01 [3.3/3.5] P21 Which one of the following contains indications of cavitation in an operating centrifugal pump? A. Low flow rate with low discharge pressure. B. Low flow rate with high discharge
More informationThe Company. QUALITY WHICH REDUCES PUMPING COSTS For over 45 years, PAPANTONATOS S.A. has focused on the customer s design,
The Company QUALITY WHICH REDUCES PUMPING COSTS For over 45 years, PAPANTONATOS S.A. has focused on the customer s design, manufacturing and service needs in the field of submersible pumps. Our engineering
More informationImo Pump. www.imo-pump.com. Imo Rotary & Centrifugal Pumps Quick Selection Guide. www.imo-pump.com. The reliable pump people
Imo Pump Imo Rotary & Centrifugal Pumps Quick Selection Guide ALLHEAT series pump in heat transfer fluid service Germany 3G series pump in compressor lube service Buffalo, NY, USA CIG series pumps in hydraulic
More informationPump Specifications 405 Series Commercial Drain Pump (High-Temp) 2 Solids handling
Pump Specifications 405 Series Commercial Drain Pump (High-Temp) 2 Solids handling 405_P1 R1/27/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
More informationYour Partner for Concentrated Solar Power Generation The Heart of Your Process
1 Sulzer Pumps Your Partner for Concentrated Solar Power Generation The Heart of Your Process 2 Experience and Solutions You Can Rely on Around the world, the power industry is taking on the challenge
More informationDry Pit Solids Handling Pumps
Dry Pit Solids Handling Pumps A Time-Tested Leader Chicago Pump Dry Pit Solids Handling Pumps have an established reputation of efficiency, long life and reliable operation First in: Quality 3Reliability
More informationPART 2 FORKLIFT HYDRAULIC SYSTEM
PART 2 FORKLIFT HYDRAULIC SYSTEM Chapter 1 Description and Operation Component Locations & Circuit Layouts 1 Hydraulic Pump 11 Control Valve 14 Valve Section Oil Flows 15 Anti-Cavitation Valve 22 Velocity
More informationHorizontal Jet Pumps 1/3-1-1/2 HP
Horizontal Jet s 1/3-1-1/2 FW01 0909 Supersedes 0409 The CPJ, CPH and EK models feature the famous Flint and Walling Service Plus motor, available in either NEMA J or Uni-frame flange construction. The
More informationINDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK
INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK CL - CH - CK Direct driven solution for industry Proven technology, solid construction The CL - CH - CK units are directly driven air-cooled, single
More informationPump Maintenance - Repair
Pump Maintenance - Repair Brian Trombly Mo Droppers Cummins Bridgeway, Gaylord, Mi The basic centrifugal pump consists of two main elements: 1. The rotating element which includes an impeller and a shaft.
More informationHPT High Speed Boiler Feedwater Pumps
HPT High Speed Boiler Feedwater Pumps The Heart of Your Process Types of Boiler Feedwater Pumps Diffuser Casing Segmental Ring Volute Casing Horizontal Split Diffuser Casing High Speed Barrel Casing HPT
More information300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS
Section: MOYNO 500 PUMPS Page: 1 of 8 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS Mechanical Seal Models Packing Gland Models MODELS DESIGN FEATURES
More informationPara la protecció n de la vida y las propiedades, las Bombas de Incendio AC ofrece paquetizados que satisfacen cada necesidad.
BOMBAS DE INCENDIO EQUIPOS ESTACIONARIOS ITT Industries ISO 9001 A-C Fire Pumps System Para la protecció n de la vida y las propiedades, las Bombas de Incendio AC ofrece paquetizados que satisfacen cada
More informationCRN5-5 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN5-5 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96517184 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn5/96517184/crn-5-5-a-fgj-g-e-hqqe.html
More informationPower Recovery Turbines
Power Recovery Turbines Fixed and Variable Geometry Vertical Horizontal Bulletin PS-90-1 (E) Pump Supplier To The World Flowserve is the driving force in the global industrial pump marketplace. No other
More informationLEISTRITZ PUMPEN GMBH. Leistritz Screw Pumps & Systems. Cargo and Liquid Handling
LEISTRITZ PUMPEN GMBH Leistritz Screw Pumps & Systems Cargo and Liquid Handling Leistritz Screw Pumps and Systems Leistritz Pumpen GmbH Leistritz Pumpen GmbH with its headquarters in Nuremberg/Germany
More informationPump Selection and Sizing (ENGINEERING DESIGN GUIDELINE)
Guidelines for Processing Plant Page : 1 of 51 Rev 01 Feb 2007 Rev 02 Feb 2009 Rev 03 KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru. (ENGINEERING DESIGN GUIDELINE)
More informationCENTRIFUGAL PUMP SELECTION, SIZING, AND INTERPRETATION OF PERFORMANCE CURVES
CENTRIFUGAL PUMP SELECTION, SIZING, AND INTERPRETATION OF PERFORMANCE CURVES 4.0 PUMP CLASSES Pumps may be classified in two general types, dynamic and positive displacement. Positive displacement pumps
More informationPUMPS TYPE OF PUMP PRESSURE/FLOW RATING CHARACTERISTICS. Centrifugal Low Pressure/High Flow Flow changes when
PUMPS Pumps provide the means for moving water through the system at usable working pressures. The operation and maintenance of these pumps are some of the most important duties for many water utility
More informationBSM MOTOR DRIVEN CENTRIFUGAL PUMPS
PRINCIPLE OF OPERATION A hydraulically and dynamically balanced impeller with raised vane sections discharges liquid as a result of the centrifugal force developed in rotation. The head developed is entirely
More informationCRN32-2-2 A-F-G-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRN32-2-2 A-F-G-E-HQQE 3x4D 5 HZ Grundfos Pump 96122352 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn32/96122352/crn-32-2-2-a-f-g-e-hqqe.html
More informationBOWIE PUMPS OPERATION - MAINTENANCE
BOWIE PUMPS OPERATION - MAINTENANCE PUMPING PRINCIPLE: The meshing owieeof the gears cause a slight depression, with the resulting enmeshing of the gears causing a vacuum drawing the fluid being pumped
More informationCHAPTER. Fire Pumps FIRE PUMP OVERVIEW. Fire Pump Unit Defined. Fire Pump Unit Responsibility
Fire Pumps CHAPTER 4 Commissioning of fire pumps is much more involved than commissioning of most other systems and must be completed correctly to verify operation of this critical equipment. This chapter
More informationAftermarket Technical Service Solutions for Pumping Technologies
Aftermarket Technical Service Solutions for Pumping Technologies HIGH QUALITY OEM PARTS, SERVICE, REPAIR, UPGRADES + RE-RATES: DELIVERING VALUE FOR OUR CUSTOMERS SPX - An Introduction SPX is a Fortune
More informationNew 27 hp 2 Cylinder Liquid-Cooled Engine
New 27 hp 2 Cylinder Liquid-Cooled Engine Introducing the new 27 hp Liquid-Cooled Vanguard 2/LC Engine A cooler, smoother, longer running commercial engine. That s the liquid-cooled advantage of the Vanguard
More informationZOP, ZOT SIGMA PUMPY HRANICE GEAR PUMPS 426 1.99 21.04
SIGMA UMY HRANICE GEAR UMS SIGMA UMY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: sigmahra@sigmahra.cz, 426 1.99 21.04 Application In
More informationPumps for Oil & Gas Upstream Applications
Engineering Flow Solutions Pumps for Oil & Gas Upstream Applications API 610 / ISO 13709:9 ONSHORE The world s main oil & gas deposits are located onshore. As fields with easy accessible oil being depleted,
More informationVertical Multistage Centrifugal Electric Pumps SV2-4-8-16 Series NEW LASER TECHNOLOGY
Vertical Multistage Centrifugal Electric Pumps SV2-4-8-16 Series NEW LASER TECHNOLOGY TYPICAL APPLICATIONS Water supply Transfer and distribution from water systems Pressure boosting in apartment buildings
More informationOUR PRODUCTS TRH-TRS-TRM-TRV. LIQUID RING VACUUM PUMPS AND COMPRESSORS Capacity up to 2100 ACFM Vacuum to 29 Hg. Our Other Products.
Our Other Products OUR PRODUCTS Liquid Ring & Rotary Vane Vacuum Pumps and Systems Liquid Ring Vacuum Pumps: 3 CFM to,000 CFM Liquid Ring Compressors up to 1 psig Heat Transfer Pumps for hot thermal oils
More informationBoiler Feed Pumps in Utility Power Stations. Generate Power Reliably and Economically
Boiler Feed Pumps in Utility Power Stations Generate Power Reliably and Economically We will make sure 2 KSB Your Pump and Valve Specialist Worldwide you achieve the maximum yield Through targeted investments
More informationPOLARIS AIR COMPRESSOR SERIES. engineering. excellence. stellar. performance. A World Leader for Centrifugal Compressors
POLARIS AIR COMPRESSOR SERIES engineering excellence stellar performance P - 3 0 0 RELIABLE 100% OIL-FREE ENGINEERED AIR A World Leader for Centrifugal Compressors It s simple: The Polaris Air Compressor
More informationFire Pump Plan Review March 2010
Fire Pump Plan Review March 2010 Date of Review: / / Permit Number: Business/Building Name: Address of Project: Designer Name: Designer s Phone: Contractor: Contractor s Phone: Occupancy Classification:
More informationBERMAD Waterworks. Pressure Relief/Sustaining Valve. 700 Series. Model 730. Features and Benefits. Major Additional Features
Pressure Relief/Sustaining Valve Prioritizing pressure zones Ensuring controlled pipeline fill-up Preventing pipeline emptying Pump overload & cavitation protection Safeguarding pump minimum flow Excessive
More informationRPT SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS 426 2.98 23.01
SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS RPT SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +4 581 661 111, fax: +4 581 602 587 Email: sigmahra@sigmahra.cz 426
More information4" SUBMERSIBLE PUMPS
4" SUBMERSIBLE PUMPS 4" SUBMERSIBLE PUMPS 50/60 HZ Multi-stage centrifugal submersible pumps for clean water in 4" wells. The 4" VSP pump series is carefully designed and manufactured for maximum resistant
More informationVX Series Pumps Rotary Lobe Pumps designed for abrasive and viscous liquids. HIGH PERFORMANCE PUMPS DESIGNED FOR TOUGH APPLICATIONS ENGINEERED TO WORK
ENGINEERED TO WORK HIGH PERFORMANCE PUMPS DESIGNED FOR TOUGH APPLICATIONS VX Series Pumps Rotary Lobe Pumps designed for abrasive and viscous liquids. Industry Agriculture Mining Biogas Agriculture Wastewater
More informationHydraulic Control Solutions
Hydraulic Control Solutions Vexve s Hydrox hydraulic control solutions are suitable for even the most challenging installation sites and conditions. Specifically designed for district heating and district
More informationLaing industrial pumps
Laing industrial pumps... with spherical motor, robust and reliable! Normal suction centrifugal pumps! Self-priming pumps! Ecocirc DC pumps Summary Chapter Page Normal suction centrifugal pumps... 3 Application...
More informationGE Oil & Gas. Texsteam * Pumps: precise chemical injection pumping
GE Oil & Gas Texsteam * Pumps: precise chemical injection pumping 2 With a wide range of capacities and operating pressures, GE s versatile Texsteam pumps can handle challenging chemical pumping requirements
More informationOil and Coolant Circulating Heating System. Model - OCSM
Oil and Coolant Circulating Heating System Model - OCSM Installation & Operation Manual 216280-000 REV 2 Identifying Your System The HOTSTART heating system is designed to heat fluids for use in marine
More informationMaintenance and Service Instruction
Screw pumps E4 Maintenance and Service Instruction E4 1 IMO AB This instruction is valid for all E4 pump models shown on page 2 Contents Page List of components 2 Exploded view/ordering code 3 Service
More informationCRK 2-130 A-W-A-BUBV 85805906
GRUNDFOS DATA BOOKLET CRK 2-13 A-W-A-BUBV 858596 Grundfos Pump 497113 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crk2/497113/crk-2-13-13-a-w-a-auuv.html
More informationWet Stator Units for Oil and Gas Upgrade and support services
Wet Stator Units for Oil and Gas Upgrade and support services Electro-submersible Pump Maintenance Sulzer has the in-house capability to provide specialist service support to the upstream oil and gas industry
More informationIN series. Centrifugal pumps standardized to DIN-24255
IN series Centrifugal pumps standardized to DIN-24255 DESCRIPTION The new standardized IN series are single-stage horizontal centrifugal pumps, with axial suction and radial discharge, buit to Standard
More informationHydraulically actuated clutches and spring-applied brakes clutch/brake combined units
왎 Hydraulically actuated clutches and spring-applied brakes clutch/brake combined units Or tlinghaus Plates. Clutches. Brakes. Systems. Hydraulically actuated clutches and spring-applied brakes clutch/brake
More informationDéfumair XR. ventilation and cmv. fire grade - label CE. smoke-extraction fan extraction casing for kitchen at F400-120. advantages.
Défumair XR smoke-extraction fan extraction casing for kitchen at F400-120 Personalisation : - Phonic insulation version by insulated double-skin panels through 25 mm glass wool, class M1. advantages Originally
More informationCanned motor pumps in compliance with API 685 A contribution to environmental protection
Canned motor pumps in compliance with API 685 A contribution to environmental protection INTRODUCTION Environmental awareness, which has increased in the past few years, has resulted in chemical and petrochemical
More informationMax. Head (m) LVR3-7-220V 3 32 5 44 0,55 10 50Hz ~ 220 V Oval Flange G1. LVR3-7-380V 3 32 5 44 0,55 10 50Hz ~ 380 V Oval Flange G1
Description NordicFlow s keep the system pressurized during normal conditions and prevent unnecessary activation of the main pump. They have compact design, high efficiency, low noise, reliable sealing
More informationN-PUMP SERIES FOR MAXIMUM RELIABILITY AND EFFICIENCY IN WASTEWATER HANDLING. Flygt
N-PUMP SERIES FOR MAXIMUM RELIABILITY AND EFFICIENCY IN WASTEWATER HANDLING Flygt The Concept N-Pump series. Bringing NEW levels of efficiency to wastewater handling applications Reduced pumping efficiency,
More informationChapter 2 Pump Types and Performance Data
Chapter 2 Pump Types and Performance Data Abstract Centrifugal pumps are used for transporting liquids by raising a specified volume flow to a specified pressure level. Pump performance at a given rotor
More informationANDRITZ Pumps Products, systems, applications
ANDRITZ Pumps Products, systems, applications www.andritz.com/pumps ANDRITZ Pumps Performance based on experience, competence and quality Double suction split case pump for conveying water and suspensions
More informationDUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
More informationMAGNETIC DRIVE SEAL-LESS PUMPS
MAGNETIC DRIVE SEAL-LESS PUMPS MAGNETIC DRIVE SEAL-LESS PUMPS Since 2005, ROTOS DIVISION of GRUPPO ATURIA has developed this extensive program of pumps for industry with a new complete line of SEAL-LESS
More informationFixed displacement vane pumps
Fixed displacement vane pumps RE 1335/1.5 Replaces: 11.2 1/22 Types PVV and PVQ Nominal sizes 18 to 193 Series 1X Maximum operating pressure 21 bar Maximum displacement 18 to 193 cm 3 Doppelpumpe_d_ Double
More informationINSTALLATION & OPERATING INSTRUCTIONS
INSTALLATION & OPERATING INSTRUCTIONS WARNING RISK OF ELECTRIC SHOCK. CONNECT ONLY TO A CIRCUIT PROTECTED BY A GROUND-FAULT CIRCUIT-INTERRUPTER. THE UNIT SHOULD BE INSTALLED BY A QUALIFIED SERVICE REPRESENTATIVE.
More informationTECHNICAL BROCHURE B5-33GB 5GB, 7GB, 10GB, 18GB, 25GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP
TECHNICAL BROCHURE B-33GB GB, 7GB, 1GB, 18GB, 2GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. Optional Stainless Steel Construction:
More informationTrash Pumps Models: 56200, 562000, 56201, 562001, 56300, 563000, 56301, 563001
Trash Pumps Models: 56200, 562000, 56201, 562001, 56300, 563000, 56301, 563001 Specifically designed pumps for heavy duty applications Handles solids with eas and simple to open and clean Standard roll
More informationProcurement, Inventory Management and Supply Chain solutions for the Petrochemicals sector
Procurement, Inventory Management and Supply Chain solutions for the Petrochemicals sector 1 2 About us Saudi Maintenance and Supply Chain Management Company (SMSCMC) is a top-tier integrated supply chain
More information