Videoproiettore PT-DZ 21K - PT DS 20K - PT DW 17K

Transcription

1 Videoproiettore DZ 21K PT DS 20K PT DW 17K SPECIFICHE TECNICHE: Model DZ21K DS20K DW17K Power supply V AC, 50/60 Hz (Max current requirements: 12 V) Power consumption Dissipation BTU 2,300 W (0.3 W with STANDBY MODE set to ECO,* 1 9 W with STANDBY MODE set to NORMAL.) Max. 7,848 BTU/hour (without light output: 7,585 BTU/hour) DLP chip Panel size 24.4 mm (0.96 inches) diagonal (16:10 aspect ratio) 24.1 mm (0.95 inches) diagonal (4:3 aspect ratio) 21.6 mm (0.85 inches) diagonal (16:9 aspect ratio) Display method DLP chip x 3, DLP projection system Pixels 2,304,000 (1,920 x 1,200) x 3, total of 6,912,000 pixels 1,470,000 (1,400 x 1,050) x 3, total of 4,410,000 pixels 1,049,088 (1,366 x 768) x 3, total of 3,147,264 pixels Lens Optional powered zoom and fixedfocus lenses Lamp 465 W UHM lamp x 4, replacement cycle of up to 2,000 hours* 2

2 Screen size (diagonal) m ( inches), m ( inches) with the ETD75LE50, 16:10 aspect ratio m ( inches), m ( inches) with the ETD75LE50, 4:3 aspect ratio m ( inches), m ( inches) with the ET D75LE50, 16:9 aspect ratio Brightness* 3 20,000 lm (fourlamp) 17,000 lm (fourlamp) Centertocorner uniformity* 3 90% Contrast* 3 10,000:1 (full on/off, with dynamic iris set to 3 ) Resolution 1,920 x 1,200 pixels 1,400 x 1,050 pixels (Input signals that exceed this resolution will be converted to 1,400 x 1,050 pixels.) 1,366 x 768 pixels (Input signals that exceed this resolution will be converted to 1,366 x 768 pixels.) Scanning frequency SD SMPTE ST 259 compliant, [YCBCR 4:2:2 10bit] 480i, 576i HD SMPTE ST 292 compliant, [YCBCR 4:2:2 10bit] 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p Dual SMPTE ST 372 compliant, link [RGB 4:4:4 12bit /10bit] 1080/50i, 1080/60i, HD 1080/25p, 1080/24p, 1080/24sF, 1080/30p, [X Y Z 4:4:4 12bit] 2,048 x 1,080/24p, 2,048 x 1,080/24sF 3G SMPTE ST 424 compliant, [YPBPR 4:2:2 10bit] 1080/50p, 1080/60p, [RGB 4:4:4 12bit /10bit]1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p HDMI/DVI D 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,

3 VGA (640 x 480) WUXGA* 4 (1,920 x 1,200), compatible with noninterlaced signals only, dot clock: MHz RGB YPBPR (YCBCR) Video/Y/C fh: khz, fv: Hz, dot clock: MHz fh: khz, fv: 60 Hz [480i (525i)] fh: khz, fv: 50 Hz [576i (625i)] fh: khz, fv: 60 Hz [720 (750)/60p] fh: khz, fv: 60 Hz [1035/60i] fh: khz, fv: 50 Hz [1080 (1125)/50i] fh: khz, fv: 24 Hz [1080/24p] fh: khz, fv: 30 Hz [1080/30p] fh: khz, fv: 50 Hz [1080/50p] fh: khz, fv: 60 Hz [480p (525p)] fh: khz, fv: 50 Hz [576p (625p)] fh: khz, fv: 50 Hz [720 (750)/50p] fh: khz, fv: 60 Hz [1080 (1125)/60i] fh: khz, fv: 25 Hz [1080/25p] fh: khz, fv: 48 Hz [1080/24sF] fh: khz, fv: 60 Hz [1080/60p] fh: khz, fv: 60 Hz [NTSC/NTSC4.43/PALM/PAL60], fh: khz, fv: 50 Hz [PAL/PALN/SECAM] Optical axis shift* 5 Vertical ±55 % (±44 % with the ETD75LE6) from center of screen ±50 % (±40 % with the ETD75LE6) from center of screen ±70 % (±60 % with the ETD75LE6) from center of screen Horizontal ±20 % (±15 % with the ETD75LE6) from center of screen ±30 % (±20 % with the ETD75LE6) from center of screen Keystone correction range Vertical: ±40 * 6, horizontal: ±15 Vertical: ±40 * 6 Keystone correction range with optional Upgrade Kit Vertical: ±45 * 6 * 8, horizontal: ±40 * 7 * 8 Installation Ceiling/floor, front /rear Terminals 1 IN BNC x 1 (3G/HD/SD)

4 2 IN BNC x 1 (HD/SD) 3D SYNC IN/OUT BNC x 1 (3D timing signal) 3D SYNC OUT BNC x 1 (3D timing signal) DVID IN HDMI IN DVID 24pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) HDMI 19pin x 1 (Deep Color, compatible with HDCP) RGB 1 IN BNC x 5 (RGB/YPBPR/YCBCR/YC x 1) RGB 2 IN DSub HD 15pin (female) x 1 (RGB/YPBPR/YCBCR x 1) VIDEO IN SERIAL IN BNC x 1 (composite video) Dsub 9pin (female) x 1 for external control (RS232C compliant) SERIAL OUT Dsub 9pin (male) x 1 for link control (RS232C compliant) REMOTE 1 IN M3 x 1 for wired remote control REMOTE 1 OUT M3 x 1 for link control (for wired remote control) REMOTE 2 IN Dsub 9pin (female) x 1 for external control (parallel) LAN RJ45 x 1 (for network connection, 10BaseT/100BaseTX, compliant with PJLink ) Cabinet materials Dimensions (W x H x D) Weight* 10 Molded plastic 620 x 291* 9 x 800 mm (247/16" x 1115/32"* 9 x 311/2") (optional lens not included) Approximately 43 kg (94.8 lbs) (optional lens not included) Shipping dimensions DZ21KU / 965 x 418 x 865 mm (38" x 1615/32" x 341/16")

5 946 x 402 x 846 mm (38" x 1513/16" x 335/16") Shipping weight 53 kg (116.8 lbs) 54 kg (119.0 lbs) (W x H x D) DS20KU / DW17KU DZ21KEJ / DS20KEJ / DW17KEJ DZ21KE / DS20KE / DW17KE DZ21KU / DS20KU / DW17KU DZ21KEJ / DS20KEJ / DW17KEJ DZ21KE / DS20KE / DW17KE 51 kg (112.4 lbs) Operation noise* 3 49 db (quad lamp operation) Operating environment Operating temperature: 0 45 C ( F)* 11, operating humidity: % (no condensation) Applicable software Logo Transfer Software, Multi Projector Monitoring & Control Software, Geometry Manager Pro (included in the ETUK20) Logo Transfer Software, Multi Projector Monitoring & Control Software Supplied accessories Power cord with secure lock, wireless/wired remote control unit, batteries (R6/AA type x 2)

6 * Product numbers vary depending on the market. The general guideline is as follows: The product number in North America and Taiwan is DZ21KU, DS20KU, and DW17KU. The product number in Europe (except for those shipped directly to Europe), CIS, Asia (except Taiwan), Oceania, Middle East, and Africa is DZ21KE, DS20KE, and DW17KE. The product number for the direct shipments to Europe is DZ21KEJ, DS20KEJ, and DW17KEJ. *1 When the STANDBY MODE is set to ECO, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal. *2 The usage environment affects the lamp replacement cycle. *3 Measurement, measuring conditions, and method of notation all comply with ISO international standards. *4 WUXGA resolution is supported only when the signals are compliant with VESA CVTRB (Coordinated Video TimingReduced Blanking). *5 Optical axis shift cannot be operated with the ETD75LE50. *6 ±22 with the ETD75LE50, ±28 with the ETD75LE6, and ±40 with the ETD75LE10 and ETD75LE20. *7 Up to ±15 with the ETD75LE50 and ETD75LE6. *8 Up to a total of ±55 during simultaneous horizontal and vertical correction. *9 With legs at shortest position. *10 Average value. May differ depending on the actual unit. *11 The operating temperature range is 0 C to 40 C (32 F to 104 F) when the FAN CONTROL is set to HIGH ALTITUDE MODE (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). When the projector is used with the ETSFR510 Smoke Cut Filter, the operating temperature range is 0 C to 35 C (32 F to 95 F), and the projector cannot be used in places at high altitude. WITH THE ETLAD510P/LAD510PF MOUNTED FOR THE PORTRAIT MODE: The operating temperature range is 0 C to 40 C (32 F to 104 F). The operating temperature range is 0 C to 35 C (32 F to 95 F) when the FAN CONTROL is set to HIGH ALTITUDE MODE (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). When the projector is used with the ETSFR510 Smoke Cut Filter, the operating temperature range is 0 C to 30 C (32 F to 86 F), and the projector cannot be used in places at high altitude.