308CS3818 3/8 18 3/ CS1418 1/4 18 1/ CS3824 3/8 24 3/ CS1424 1/4 24 1/ CT1304 1/2 13 3/ CT1801 1/4 18 1/4 1
|
|
- Sylvia Barnett
- 7 years ago
- Views:
Transcription
1 7-08 5st. Avenue, Woodside, NY 377 (78) (800) Fax (78) (770) (800) Fax (770) HSS Bell Hanger - Feeler Bits With Fish Hole (Electrical / Wire) u Fish Hole In Flute For Pulling Wire u Special Point For Fast Drilling In Wood & Metal u Tapering For Quick Chip Clearance Telephone Installation Burglar Alarms Wire & Cable Applications Part # Size OAL Shank Qty. List 308BH200 3/ 2 3/ 308BH800 3/ 8 3/ 308BH20 /4 2 /4 308BH80 /4 8 /4 308BH240 /4 24 /4 308BH300 /4 30 /4 308BH420 /4 42 /4 308BH202 5/ 2 5/ 308BH802 5/ 8 5/ 308BH2402 5/ 24 5/ 308BH203 3/8 2 3/8 308BH803 3/8 8 3/8 Part # Size OAL Shank Qty. List 308BH2403 3/8 24 3/8 308BH3003 3/8 30 3/8 308BH4203 3/8 42 3/8 308BH4803 3/8 48 3/8 308BH806 7/ 8 3/8 308BH204 /2 2 3/8 308BH804 /2 8 3/8 308BH2404 /2 24 3/8 308BH3004 /2 30 3/8 308BH4204 /2 42 3/8 308BH4804 /2 48 3/8 308BH858 5/8 8 /2 308BH805 3/4 8 /2 308BH80 8 /2 ALL BELL HANGER DRILL BITS ARE SOLD INDIVIDUALLY CARBON STEEL Bell Hanger - Feeler Bits With Fish Hole Part # Size OAL Shank Qty. List Part # Size OAL Shank Qty. List 308CS42 /4 2 /4 308CS388 3/8 8 3/8 308CS48 /4 8 /4 308CS3824 3/8 24 3/8 308CS424 /4 24 /4 Less expensive than High Speed Steel (HSS) - Carbon Steel drills all wood, studs, aluminum, insulation, and drywall. Will not perform as well as HSS in steel. u Fish Hole In Flute For Pulling Wire u Special Point For Fast Drilling In Masonry & Wood Telephone Installation Burglar Alarms Wire & Cable Applications Carbide Tip Bell Hanger - Feeler Bits With Fish Hole (Electrical / Wire) Part # Size OAL Shank Qty. List Part # Size OAL Shank Qty. List 308CT30 /4 3 /4 308CT304 /2 3 3/8 308CT80 /4 8 /4 308CT804 /2 8 3/8 308CT240 /4 24 /4 308CT2404 /2 24 3/8 308CT302 5/ 3 5/ 308CT3004 /2 30 3/8 308CT802 5/ 8 5/ 308CT305 3/4 3 /2 308CT2402 5/ 24 5/ 308CT805 3/4 8 /2 308CT303 3/8 3 3/8 308CT803 3/8 8 3/8 308CT2403 3/8 24 3/8 308CT3003 3/8 30 3/8 48
2 7-08 5st. Avenue, Woodside, NY 377 (78) (800) Fax (78) (770) (800) Fax (770) Electrician s Stretch Bits - Fish Bits Part # Size X OAL Shank Application List 308FB838 3/8 X 8 3/ Popular with alarm & communication 308FB2438 3/8 X 24 3/ installers for pulling light wire. 308FB3638 3/8 X 3 3/ 308FB5438 3/8 X 54 3/ 308FB7238 3/8 X 72 3/ 308FB82 /2 X 8 3/ Popular with electricians and others 308FB242 /2 X 24 3/ for pulling heavier wire. 308FB362 /2 X 3 3/ 308FB542 /2 X 54 3/ 308FB722 /2 X 72 3/ u Self Drilling u Fish Hole u 3/ Flexible Shaft Wood 308FB896 9/ X 8 3/ Popular with electricians and others 308FB2496 9/ X 24 3/ for pulling heavier wire. 308FB3696 9/ X 3 3/ 308FB5496 9/ X 54 3/ 308FB7296 9/ X 72 3/ Studs Insulation 308FB5434 3/4 X 54 3/ Popular with electricians and others 308FB7234 3/4 X 72 3/ for pulling heavier wire 308FBG Steering Guide Helps manipulate bits while within the wall cavity. Stretch Bits are constructed of a high carbon steel self-feed auger bit, permanently brazed to a flexible shaft. This tool can be inserted through small wall openings enabling the operator to bore holes through studs within the wall cavities without damaging finished walls or ceilings. Eye Holes are provided at each end of the Stretch Bits which allow easy retrieval of wires from either direction after drilling. 49
3 7-08 5st. Avenue, Woodside, NY 377 (78) (800) Fax (78) (770) (800) Fax (770) Mild Steel Aluminum Cast Iron Wood 8 POINT u M2 HSS u Straight Shank To /2, then Reduced u Sharp Cutting Edge to Drill In Many Different Materials Precision point angle for effective penetration through steel and wood. Extra length flute with continuous cutting edges for drilling deep holes and fast chip removal. Reduced shank fits all drill motors with /2 chucks. Non-slip grips prevent the bit from spinning in the chuck. 2 Long Boy - HSS Part # Size Dec. OAL Flute Qty. List 26HS0864 / HS264 3/ HS464 7/ HS664 / HS864 9/ HS2064 5/ HS2464 3/ HS2864 7/ HS3264 / HS3664 9/ HS4064 5/ HS4464 / HS4864 3/ HS5264 3/ HS5664 7/ HS6064 5/ HS HS7264 -/ Long Boy - HSS Part # Size Dec. OAL Flute Qty. List 27HS664 / HS2064 5/ HS2464 3/ HS3064 5/ HS3264 / HS4064 5/ HS4864 3/
4 7-08 5ST. AVENUE, WOODSIDE, NY 377 (78) (800) FAX (78) E-PROGRESS CENTER AVE., LAWRENCEVILLE, GA (770) (800) FAX (770) Made In ADJUSTABLE DEPTH ADJUSTABLE DEPTH Screw Pilot - ROUND Shank Part # Description List 30SPR006 #6 Screw Pilot Round Shank 30SPR008 #8 Screw Pilot Round Shank 30SPR00 #0 Screw Pilot Round Shank 30SPR02 #2 Screw Pilot Round Shank Screw Pilot - HEX Shank Part # Description List 32SPX006 #6 Screw Pilot HEX Shank 32SPX008 #8 Screw Pilot HEX Shank 32SPX00 #0 Screw Pilot HEX Shank 32SPX02 #2 Screw Pilot HEX Shank Drills, Countersinks, Counterbores in one operation. For every wood screw: Flat, Round, & Oval head. For use with electric or hand drills on wood, plastic, or soft metal. For screw sizes #6, #8, #0, #2. Plug Cutter - Round Shank Plug Cutter - Hex Shank Made In Cut Part # Size Depth Shank List 3CUT04 /4 /4 3CUT038 3/8 /4 3CUT02 /2 /4 3CUT058 5/8 /4 Cut Part # Size Depth Shank List 3HEX04 /4 /4 3HEX038 3/8 /4 3HEX02 /2 /4 3HEX058 5/8 /4 WOOD ONLY Precision Ground Hardened High Performance Sold Individually Brad Point Wood Drill Part # Size O/A Shank Qty. List 309BP0864 /8 2-/2 /8 309BP064 5/32 3-/8 5/32 309BP264 3/ 3-3/8 3/ 309BP664 /4 4 /4 309BP2064 5/ 4-5/8 5/ 309BP2464 3/8 4-7/8 3/8 309BP2864 7/ 5-/2 3/8 309BP3264 /2 3/8 309BP4064 5/8 7 3/8 309BP4864 3/4 7-3/4 3/8 309BP5664 7/8 8-/8 3/8 309BP /2 3/8 Part # 309BP Pc. Set Woodworking /8-3/- /4-5/- 3/8-7/ - /2 Precision Ground Center Spur Two Shoulder Cutting Spurs Fluted Bit Industrial Quality 5
5 MAIN OFFICE ST. AVENUE, WOODSIDE, NY 377 (78) (800) FAX (78) E-PROGRESS CENTER AVE., LAWRENCEVILLE, GA (770) (800) FAX (770) NEW WING TIP Cold Forged Full Length Treated Part # Size O/A Qty. 300SB664 /4 300SB2064 5/ 300SB2464 3/8 300SB2864 7/ 300SB3264 /2 300SB3664 9/ 300SB4064 5/8 300SB4464 / 300SB4864 3/4 300SB5264 3/ 300SB5664 7/8 300SB6064 5/ 300SB SB7264 -/8 Rust Protection 300SB8064 -/4 Wing Tip Design 300SB8864-3/8 300SB9664 -/2 Machine Finish Cutting Groove /4 Hex Power Groove Shank Individually Stamped With Size Industrial Quality ALL SPADE POINT POWER DRILL BITS ARE SOLD INDIVIDUALLY. PER POUCH. /4 Hex Power Groove Shank Quick-Change PC. Construction /4 Hex Power Groove Shank Industrial Quality Quick insert / quick spring out chuck extensions. Sold Individually 52 Long Spade Wood Drill List Part # 300-ST-06 6 Pc. Spade Bit Set 3/8 - /2-5/8 3/4-7/8 - List Price Long Spade Wood Drill Part # Size O/A Qty. 30SB664 /4 30SB2464 3/8 30SB3264 /2 30SB4064 5/8 30SB4464 / 30SB4864 3/4 30SB5664 7/8 30SB SB8864-3/8 List /4 Hex Power Groove Shank Extension - For Spade BIt Size For Shank EXT-300 /4 x 2 /4 5/8 EXT-500 /4 x 8 /4 5/8 Part # List Straight Shank Extensions P.57
6 7-08 5st. Avenue, Woodside, NY 377 (78) (800) Fax (78) (770) (800) Fax (770) Single Spur - Double Twist Wood Drill ELECTRICIAN S POWER BITS These power bits are specifically designed to fit in between building studs for the installation of conduits and wires. Ideal use is with angle power drills. Packaged with a rust protection sleeve. Sold Individually. Part # Size O/A Shank List 304BU4064 5/8 8-/2 5/ 304BU4464 / 8-/2 5/ 304BU4864 3/4 8-/2 5/ 304BU5264 3/ 8-/2 5/ 304BU5664 7/8 8-/2 5/ 304BU /2 5/ 304BU7264 -/8 8-/2 7/ 304BU8064 -/4 8-/2 7/ u 8-/2 Length u 5-/2 Twist Length u Heat Treated u Machine Ground Hollows u Self-Feeding Screw Point u Shank With 2 Set Screw Recesses For Use with Power Bit Extensions Double Spur - Double Twist Wood Drill PLUMBER POWER BITS These power bits are specifically designed for boring holes where a smooth finish is required. Ideal for plumbing, heating, air conditioning, and other pipe installation. Packaged with a rust protection sleeve. Sold Individually. Part # Size O/A Shank List 305BU4864 3/4 6-/2 7/ 305BU5664 7/8 6-/2 7/ 305BU /2 7/ 305BU7264 -/8 6-/2 7/ 305BU8064 -/4 6-/2 7/ 305BU8864-3/8 6-/2 7/ 305BU9664 -/2 6-/2 7/ u 6-/2 Length u 4 Twist Length u Heat Treated u Machine Ground Hollows u Self-Feeding Screw Point u Shank With 2 Set Screw Recesses For Use with Power Bit Extensions 53
7 7-08 5st. Avenue, Woodside, NY 377 (78) (800) Fax (78) (770) (800) Fax (770) Power Pole Auger Wood Drills u Carbide Tipped u Hex Shank u Heat Treated u Machine Ground Hollows u Deep Throat u Single Twist u Single Cutter u Side Lip u Power Groove u Self-Feeding Screw Point Part # Size O/A Drilling Shank List CPP-076 7/ 8 5 7/ CPP-2 / / CPP-222 / / CPP-323 / / CPP-49 9/ 8 5 7/ CPP-592 9/ / CPP-693 9/ / CPP-758 5/ / CPP / / CPP / / CPP-206 / 8 5 7/ CPP-262 / / CPP-2263 / / Made In CPP / / CPP / / CPP / / CPP-263 3/ 8 5 7/ CPP / / CPP / / CPP / / CPP / / CPP / / CPP / 8 5 7/ CPP / / CPP / / ALL POWER POLE AUGER DRILL BITS ARE SOLD INDIVIDUALLY. CPP / CPP / CPP / Use with /2 Drills or Impact Wrenches: Stanley ID-04 Yellow Jacket Racine HIW-76 Fairmount H8508 Also works well in heavy duty electric, pneumatic, and gas powered drills. Power Pole Auger Drill Bits are carbide tipped wood drill bits that have a carbide-tipped cutting tip combined with a hardened steel cutting edge. These unique carbide tipped wood drill bits bore holes in all types of wood quickly, leaving little or no residue. A truly clean, smooth hole is produced. Power Pole carbide tipped wood auger drill bits require less torque to operate and can be used with electric, air, or gasoline powered drill motors and impact wrenches. Made of premium steel, Power Pole Auger Bits are for boring CCA and Creosoted poles, railroad ties, bulkheads, and other heavy timber. 54
8 7-08 5st. Avenue, Woodside, NY 377 (78) (800) Fax (78) (770) (800) Fax (770) Long Ship Auger Wood Drill Size In Hex Part # Size 6ths O/A Shank List 302SL3264 / / 302SL3664 9/ 9 8 5/ 302SL4064 5/ / 302SL4464 / 8 5/ 302SL4864 3/ / 302SL5264 3/ 3 8 5/ 302SL5664 7/ / 302SL6064 5/ 5 8 7/ 302SL / 302SL7264 -/ / 302SL8064 -/ / 302SL8864-3/ / 302SL9664 -/ / u Twist Length u Heat Treated u Machine Ground Hollows u Deep Throat u Single Twist u Single Cutter u Side Lip u Self-Feeding Screw Point ALL SHIP AUGER DRILL BITS ARE SOLD INDIVIDUALLY. 8 Long Ship Auger Wood Drill Size In Hex Part # Size 6ths O/A Shank List 303SL2464 3/ / 303SL2864 7/ 7 8 5/ 303SL3264 / / 303SL3664 9/ 9 8 7/ 303SL4064 5/ / 303SL4464 / 8 7/ 303SL4864 3/ / 303SL5264 3/ 3 8 7/ 303SL5664 7/ / 303SL6064 5/ 5 8 7/ 303SL / 303SL7264 -/ / 303SL8064 -/ / 303SL8864-3/ / 303SL9664 -/ / u 2 Twist Length u Heat Treated u Machine Ground Hollows u Deep Throat u Single Twist u Single Cutter u Side Lip u Self-Feeding Screw Point BARCODED Made of premium steel, Ship Auger Bits are for boring creosoted poles, railroad ties, bulkheads, and other heavy timber. 55
9 7-08 5ST. AVENUE, WOODSIDE, NY 377 (78) (800) FAX (78) E-PROGRESS CENTER AVE., LAWRENCEVILLE, GA (770) (800) FAX (770) Cold Forged Full Length Treated Machine Finish Cutting Groove Rust Protection Wing Tip Design Precision Ground HEX Shank Individually Stamped With Size Industrial Quality Forstner Wood Drill 3-/2 LONG UP TO 2-/8 DIA. LONG FROM 2-/4 DIA. Part # Size Shank Qty. List 30FB664 /4 3/8 30FB2464 3/8 3/8 30FB3264 /2 3/8 30FB4064 5/8 3/8 30FB4864 3/4 3/8 30FB5664 7/8 3/8 30FB6464 3/8 30FB7264 *-/8 3/8 30FB8064 *-/4 3/8 30FB8864 *-3/8 3/8 30FB9664 *-/2 3/8 30F0464 *-5/8 3/8 Sharp edges for precise holes. Part # Size Shank Qty. List 30F264 *-3/4 3/8 30F2064 *-7/8 3/8 30F2864 *2 3/8 30F3664 *2-/8 3/8 30F4464 *2-/4 /2 30F5264 *2-3/8 /2 30F6064 *2-/2 /2 30F6864 *2-5/8 /2 30F7664 *2-3/4 /2 30F8464 *2-7/8 /2 30F9264 *3 /2 30F20064 *3-/8 /2 * Sizes -/8 and Over Have Multi Spur Cutting Edge. ALL FORSTNER DRILL BITS ARE SOLD INDIVIDUALLY. PER PACK 4 Extension PART # 30EX000 4 Extension For Forstner Woodboring Drills For 3/8 Shanks Only! List 6 Pc. Forstner Set PART # 30FB006 Forstner Woodboring Drill Set 6 Piece Set SIZES /4, 3/8, /2, 5/8, 3/4, 7/8,, -/8, -/4, -3/8, -/2, -5/8, -3/4, -7/8, 2, 2-/8 List 56
10 7-08 5st. Avenue, Woodside, NY 377 (78) (800) Fax (78) (770) (800) Fax (770) Self Feed (Multispur) Wood Drill NEW Pipe Tubing Cutting Part # Size MM Entrance Entrance Flute Shank List 306ST /2 7/8 7/ 306ST-2 -/ /2 7/ 306ST-3 -/ /4 -/8 7/ 306ST-4-3/ /4 7/ 306ST-5 -/ /8 7/ 306ST-6-3/ /4 -/2 7/ 306ST /2-7/8 7/ 306ST-8 2-/ /2 2 7/ 306ST-9 2-/ /2 2-/8 7/ 306ST-0 2-9/ /2 7/ 306ST /2 2-7/8 2 7/ 306ST-2 3-5/ /2 2 7/ 306ST-3 4-5/ /2 2 7/ ALL MULTISPUR & FORSTNER BITS SOLD INDIVIDUALLY Replacement Screw Points Part # Size Fits List SP000 /4 -/4 to 2-9/ SP0002 /4 3 to 4-5/8 Screw Points come with replacement set screw and wrench. u Fast Continuous Self Feeding u Deep Holes u 7/ Impact Hex Shank u Double End Screw u Extra Screw & Wrench Wood Plumbing Rough-in Work Extensions for Ship Auger & Multispur POWER BIT EXTENSIONS For Part # Size Shank List 307BT24 /4 x 2 Extension /4 9/ 307BT48 /4 x 8 Extension /4 9/ 307BT568 5/6 x 8 Extension 5/ / 307BT5624 5/6 x 24 Extension 5/ / 307BT7609 7/6 x 9 /2 Extensions 7/ 7/8 For Part # Size Shank List 307BT762 7/6 x 2 Extensions 7/ 7/8 307BT768 7/6 x 8 Extensions 7/ 7/8 307BT7624 7/6 x 24 Extensions 7/ 7/8 u HEX Wrench included u 2 Set Screws 57
Wood Drilling.
Wood Drilling www.irwin.com A Century of Quality and Innovation In 1885, the IRWIN Auger Bit Company was formed. Over 125 years later, IRWIN is still the leading manufacturer of wood drilling bits and
More informationCLASS # 18 POWER SHIP AUGER BITS
POWER SHIP AUGER BITS Used in the construction industry, auger bits are used for deep bore drilling. They are well suited for use where small nails or other material may be present. These bits have a resharpenable
More informationPlumbing. www.armeg.co.uk. The convenient, compact and clever solutions to your wrench and hand tool needs
INNOVATIVE DRILLING & TOOL SOLUTIONS www.armeg.co.uk Plumbing The convenient, compact and clever solutions to your wrench and hand tool needs Complete Heating Installation with PHI Wrench Set Easy Tap
More informationGuidelines for Earthquake Bracing of Residential Water Heaters
Guidelines for Earthquake Bracing of Residential Water Heaters Department of General Services Division of the State Architect 1102 Q Street, Suite 5100 Sacramento, CA 95814 Phone: (916) 324-7099 Fax: (916)
More informationUNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
More informationGuidelines for Earthquake Bracing Residential Water Heaters
Guidelines for Earthquake Bracing Residential Water Heaters Department of General Services Division of the State Architect In accordance with the Health and Safety Code Section 19215, the Division of the
More informationPolicy on Water Heater Installations Policy No. UPC 510-1-94 Effective: September 1, 1995 Revised: February 10, 1996
CITY OF SAN JOSE BUILDING DIVISION POLICY Policy on Water Heater Installations Policy No. UPC 510-1-94 Effective: September 1, 1995 Revised: February 10, 1996 All new and replacement water heaters installed
More informationIt's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
More informationStep-by-step instructions:
Spark plug thread repair for Ford Triton cylinder heads Step-by-step instructions: Identification Installation Verification Specifically designed and tested for 4.6L, 5.4L, and 6.8L 2 and 4 valve heads,
More informationElo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors
Installation Manual Elo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors SW602206 Rev B Table of Contents Chapter 1: Safety Warning... 3 Chapter 2: Kit Contents... 4 Included in Kit...
More informationMicro Precision Tools Your partner for precision applications
Micro Precision Tools Your partner for precision applications 2K Softgrip Micro Screwdrivers (page 72-73) Working in restricted areas is a particular problem especially in modern equipments, such as electronic
More informationIntroduction to JIGS AND FIXTURES
Introduction to JIGS AND FIXTURES Introduction The successful running of any mass production depends upon the interchangeability to facilitate easy assembly and reduction of unit cost. Mass production
More informationMakes bends greater than 90 in a single operation
TurnPro Tools TurnPro Indexing Tube Bender TurnPro HTB Indexing Handle Tube Bender Makes bends greater than 90 in a single operation Eliminates crossed handles Noassembly andreassembly ofbenderhandles
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More information413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX
413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:
More informationLathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
More informationStraight shank twist drills. Jobber drills. Jobber drills. DIN 338 GT 100 lh 1,300-10,200. DIN 338 N 2,36 lh 0,360-20,000. DIN 338 N lh 0,250-14,250
Jobber drills Jobber drills HSS 205 HSS 2456 DIN 338 N 2,36 rh 0,200-20,000 DIN 338 N rh 1,000-16,000 HSS 206 HSS 2457 DIN 338 H rh 0,200-20,000 DIN 338 GT 100 rh 1,000-15,000 HSS 207 HSCO 305 DIN 338
More informationMilling Chuck Features
Milling Chuck Features Since its first introduction into the industry in 1963, Nikken has sold over 2,000,000 worldwide and never stopped improving its original design. Featuring multi-roller bearings
More informationC-Plus Softgrip Screwdrivers
10 C-Plus Softgrip Screwdrivers The multi-purpose screwdrivers with 2K handles From professionals for professionals. Perfect in every detail the C-PLUS series is the result of long-lasting studies into
More informationSCREWDRIVER SAFETY TIPS
SCREWDRIVER SAFETY TIPS Never use a screwdriver as a cold chisel, or for prying, punching, chiseling, scoring or scraping. Make sure the tip fits the slot of the screw; not too loose or tight. Never expose
More informationStep by Step instructions How to screw in wood and plastic
Step by Step instructions How to screw in wood and plastic Different screw heads As well as the simple slotted screw head, there are three different types of screw heads into which the screwdriver or bit
More informationSDS PLUS 4 Claw (4 Cutting Edges) SDS-Plus
MASONRY DRILL BITS SDS-Plus Rotary Hammer with SDS chuck or SDS adapter 5/32"x6" to 1"x10" SDS-Plus Masonry Drill s are designed for use in a rotary hammer equipped with an SDS (slotted drive shaft) type
More information37 POWER TOOLS DRILLS, PLANES, ROUTERS
37 POWER TOOLS DRILLS, PLANES, ROUTERS Safety Basics Make sure that electric tools are properly grounded or double-insulated. Never remove or tamper with safety devices. Study the manufacturer's instructions
More informationSCISSORS, SNIPS AND CUTTING TOOLS
SCISSORS, SNIPS AND CUTTING TOOLS Wiss Table of Contents Contents Page No. Snips Introduction 207 Metalmaster Compound Action Snips 208-210 Metal-Wizz Snips 211 All-purpose Cutter 211 Snips out of Drop
More informationCNC Applications Speed and Feed Calculations
CNC Applications Speed and Feed Calculations Photo courtesy ISCAR Metals. Turning Center Cutters What types of cutters are used on CNC turning Centers? Carbide (and other hard materials) insert turning
More informationLEADER IN CUTTING TECHNOLOGY
LEADER IN CUTTING TECHNOLOGY FOR OVER 2 YEARS REASONS WHY TRONEX IS THE BEST IN THE WORLD 1 2 SUPERIOR CUTTING PERFORMANCE Cut hundreds of thousands of times before dulling. Cut hundreds of thousands of
More informationindexable Center Drill
Our innovative tooling design upgrades productivity and competitive capability while reducing production requirements in a range of industries. The tooling system is designed to benefit users of machining
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
More informationTUTORIAL. REbUILdING. REAR CALIpER O-RING CONVERSION CORVETTE 1965-82. Part #: HT-2
Part #: HT-2 1965-82 CORVETTE O-RING CONVERSION REAR CALIpER REbUILdING TUTORIAL Choosing a Brake Caliper Rebuild Kit Standard Lip Seals vs. O-Ring Seals Lip seal design seals are used on 1965-1982 Corvette
More informationPrecision Vise Combinations
Precision Vise Combinations PanaVise vises and work holding tools have hundreds of uses limited only by your imagination! Each vise allows the head to Tilt, Turn & Rotate and position your work anywhere
More informationTUTORIAL. REbUILdING. front CALIpER O-RING CONVERSION CORVETTE 1965-82. Part #: HT-1
Part #: HT-1 1965-82 CORVETTE O-RING CONVERSION front CALIpER REbUILdING TUTORIAL Choosing a Brake Caliper Rebuild Kit Standard Lip Seals vs. O-Ring Seals Lip seal design seals are used on 1965-1982 Corvette
More information$117.99 $31.99 $39.99 $23.99. Things to consider when buying your next socket set:
D004006 47 Piece 6 Point Standard/Deep SAE/Metric Socket Set SAE Standard: 3/16"-9/16" SAE Deep: 3/16"-9/16" Metric Standard: 4-14 mm Metric Deep: 4-12 mm 2", 6" Extensions Hand Driver U-Joint 45 Tooth
More informationwww.cornholesupplies.com
www.cornholesupplies.com How To Build Regulation Cornhole Boards Home of the Original Cornhole Bags and Boards Supply List: 1-4' X 8' Piece of Plywood (pre sanded) 4-2" X 4" X 8' Studs (2 by 4s make sure
More informationIMPORTANT DOCUMENTATION DO NOT DISCARD!
PART NO.: 6441-263C SERIES GRT 3 JAW PARALLEL GRIPPERS INFORMATION SHEET IMPORTANT DOCUMENTATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance
More information3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
More information1.8 CRANKSHAFT OIL SEALS
SERIES 60 SERVICE MANUAL 1.8 CRANKSHAFT OIL SEALS An oil seal is fitted between each end of the crankshaft and the bores of the flywheel housing and gear case cover to retain the lubricating oil in the
More informationProfessional HEX Tools Inch & Metric
Complete Hex Program Professional HEX Tools Inch & Metric 2 Toll Free: (800) 494-6104 Wiha Hex Tools Index DESCRIPTION Page T-handles 8 PocketStar Fold Outs 16 L-keys - Long/Short 17-20 Nickel & Black
More informationGear PEPSI CAN STOVE INSTRUCTIONS
Gear PEPSI CAN STOVE INSTRUCTIONS [NOTE: Updated Instructions are now available. The new stove is less likely to develop flame leaks and the fuel/air mixture is improved. Instructions for a simmer ring
More informationAlfra Rotabest 100 Metal Core Drilling Machine. Operation Manual
Alfra Rotabest 100 Metal Core Drilling Machine Operation Manual 06/2005 1. Technical Data Prod. No.: 18630 Name : Rotabest 100 Input: Load rpm: 1800 Watt 110/175/245/385 rpm Tool Holder : MT 3 Coolant
More informationTechnique Guide. Screw Removal Set. Instruments for removing Synthes screws.
Technique Guide Screw Removal Set. Instruments for removing Synthes screws. Table of Contents Introduction Screw Removal Set 2 Surgical Technique Preoperative Planning and Preparation 6 Removal of Intact
More informationADI CABLE RAILING FOR WOOD. ADI TM Cable Railing System by Ultra-Tec pg 110-118
TM ADI CABLE RAILING FOR WOOD ADI TM Cable Railing System by Ultra-Tec pg 110-118 109 Cable Railing for Wood Railing Systems Cable Railing Kits for Wood - Level 224 SERIES Outside of Post to Outside of
More informationAZEK Rail Install Guide
TRIM MOULDING DECK PORCH RAIL PAVERS AZEK Rail Install Guide Installing AZEK Rail with CableRail by Feeney... 1 Installing CableRail by Feeney for AZEK Rail... 7 Installing AZEK Rail Stairs with CableRail
More informationMaking Soft Jaws for a Bison 3 Jaw Lathe Chuck
Making Soft Jaws for a Bison 3 Jaw Lathe Chuck By R. G. Sparber Copyleft protects this document. 1 My Bison lathe chuck has served me well for many years. One of its features is the ability to remove the
More informationMueller B-101 and A-3 Drilling and Tapping Machines
TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology
More informationTechnical Information
tapping Technical Information Troubleshooting Guide 115 TAP DOES NOT START Program depth: Tap drill size: Tap sharpness: Compression stroke may use up the entire program depth. Check for tap drill size.
More informationDRILLING MACHINES GENERAL INFORMATION
Chapter 4 DRILLING MACHINES GENERAL INFORMATION PURPOSE This chapter contains basic information pertaining to drilling machines. A drilling machine comes in many shapes and sizes, from small hand-held
More informationDie casting Figure M2.3.1
Die casting Die casting is a moulding process in which the molten metal is injected under high pressure and velocity into a split mould die. It is also called pressure die casting. The split mould used
More informationBrick Veneer Construction
Brick Veneer Construction Check list of suggested tools & support items Claw hammer Tape measure 3/4" [19 or 20] Wood chisel Wood or plastic shims Pry bar Utility knife Caulking and caulking gun Power
More informationElectrical for Detached Garages: Updated Feb 19, 2016 for 2015 CE Code in force Jan. 1, 2016. Underground branch circuit feeding a detached garage:
Electrical for Detached Garages: Updated Feb 19, 2016 for 2015 CE Code in force Jan. 1, 2016 * Garage construction requires permits (electrical, building) * Permits must be applied for at the time. * Dial
More informationDURO DYNE EAST CORP. Bay Shore, NY 11706 DURO DYNE MIDWEST Fairfield, OH 45011 DURO DYNE WEST Santa Fe Springs, CA 90670 DURO DYNE INTERNATIONAL Bay
DURO DYNE EAST CORP. Bay Shore, NY 11706 DURO DYNE MIDWEST Fairfield, OH 45011 DURO DYNE WEST Santa Fe Springs, CA 90670 DURO DYNE INTERNATIONAL Bay Shore, NY 11706 Super Sabers Self Piercing Screws For
More information1/8 Stainless Steel Cable Assemblies to Enhance Any Railing and Any View!
2014 Feeney 1st Edition 1/8 Stainless Steel Cable Assemblies to Enhance Any Railing and Any View! Standard Cable Assemblies Distributed by EURO FORGINGS INC. Architectural Components for the Railing and
More informationChar-Lynn Spool Valve Hydraulic Motors. Repair Information. W Series Geroler Motors
Char-Lynn Spool Valve Hydraulic Motors Repair Information W Series Geroler Motors with Parking Brake 004 Nut Key Ring, Retaining Bearing Ring, Retaining Ring, Retaining Washer (Thick), Pressure Washer,
More informationMetal Bending Tools, Scribes & Awls
Metal Bending Tools, Scribes & Awls 35 malco tool book better ideas for the real world. Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not for use with steel Easy Folding Bends
More informationDocument number RS-PRD-00130 Revision 05 Date 20/10/2009 Page 1/30
Date 20/10/2009 Page 1/30 1. Purpose This document describes the field replacement of the footscan plate cable for these models: 2m hi-end plate SN 11/5/xxx 2m pro plate SN 7/5/xxx 0.5m 2003 hi-end plate
More informationPhone (800) 821-8010 Fax (330) 920-0972 e-mail sales@pdq-marlin.com
1 Table of ontents asic Information dvantages of Quick hange Tooling...2 dvantages of PDQ Quick hange...3 PDQ Shank & Series information...5 Master Holders Morse Taper Holders...6 Milling Machine Holders...7
More information172 Holesaws Overview Bosch Accessories for Power Tools 09/10. 189 Diamond holesaw. with Power-Change adapter. 190 Diamond drill bits
Holesaw 172 Holesaws Overview Bosch Accessories for Power Tools 09/10 Overview 178 Progressor holesaw 189 Diamond holesaw 196 Hole cutters 183 Sheet Metal holesaw 190 Diamond drill bits 186 Multi Construction
More informationBasic Spring Motor Roller Shades
Comprehensive Roller Shade Installation Guide Basic Spring Motor Roller Shades ATTENTION!!! READ CAREFULLY! This shade has a reliable long-lasting Spring Motor. The Spring Motor must have proper tension
More informationINSTALL INSTRUCTIONS KK-C-HVAC-1 HVAC UNIT 2003-2014 CHEVROLET/GMC VANS FOR
INSTALL INSTRUCTIONS KK-C-HVAC-1 HVAC UNIT 2003-2014 CHEVROLET/GMC VANS FOR (For NEW 2007 ALL WHITE KWIK-KITS ONLY) Warning do not attempt to install A/C units unless you are experienced with servicing
More informationOverview. Milling Machine Fundamentals. Safety. Shop Etiquette. Vehicle Projects Machine Shop
Overview Milling Machine Fundamentals Wayne Staats, UW-Madison FSAE Safety Shop Etiquette Before Machining Indicating Calculating Feeds and Speeds Machining Maintenance Safety Respect the machines Common
More informationCOLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES
COLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES I. OBJECTIVE To provide an overview and basic knowledge of the University of Wyoming, College of Engineering, equipment, tools,
More informationHARDWARE STANLEY ARCHITECTURAL HARDWARE
HARDWARE STANLEY ARCHITECTURAL HARDWARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Company history...2 Wardrobe pivots...3, 4 Cabinet hinges... Cabinet pulls..., 6 Cabinet knobs...6 Cabinet
More informationThe Ensat self-tapping threaded insert...
The Ensat selftapping threaded insert... Ensat is a selftapping threaded insert with external and internal thread, cutting slots or cutting bores. A continuous process of further development has brought
More informationALFRA Rotabest Piccolo 32/50 Weldon Metal Core Drilling Machine. Operation Manual
ALFRA Rotabest Piccolo 32/50 Weldon Metal Core Drilling Machine Operation Manual 06/2005 1 1. Technical Data Prod. No.: 18550 Name : Rotabest Piccolo 32/50 Weldon Input: Load rpm: 1050 Watt 400 rpm Tool
More informationL mm. 12 100 M12x1 163.120.11 14 100 M12x1 163.140.11 16 100 M12x1 163.160.11 TECHNICAL DETAILS: - Super strength steel. L mm
aw blaes lot an mortise boring bits 163 12 100 M12x1 163.120.11 14 100 M12x1 163.140.11 16 100 M12x1 163.160.11 TECHNCA ETA: - uper strength steel. - 2 HW precision groun cutting eges [Z2]. HW Z2 RH APPCATON:
More informationRETROFITTING THE X3 MILLING MACHINE (2)
RETROFITTING THE X3 MILLING MACHINE (2) Dick Stephen continues with the mechanical modifications. Fitting the ball screws The 12mm 2mm pitch supplied by THK ball screws are delivered with the nut fitted
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationPVC Installation and Tapping For Potable Water and Sanitary Sewer. Handling and Installation Practices Manual
PVC Installation and Tapping For Potable Water and Sanitary Sewer Handling and Installation Practices Manual Table of Contents Introduction...1 Shipping and Handling...1 Handling and storage of pipe and
More informationSPIRAL STAIR KIT INSTALLATION MANUAL
SPIRAL STAIR KIT INSTALLATION MANUAL Effective January 1, 2014 If you have any questions, please call the location that your Stair Kit was purchased from: Broomall, Pennsylvania 1-800-52-7427 Ontario,
More informationSHOP NOTES METAL SHAPER FOR YOUR SHOP
SHOP NOTES METAL SHAPER FOR YOUR SHOP A METAL SHAPER is indispensable for certain machining operations where flat surfaces must be produced within very close limits, such as machining flats on castings,
More informationBUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS
BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS PLEASE READ COMPLETE INSTRUCTIONS BEFORE YOU BEGIN LEAVE INSTALLATION INSTRUCTIONS AND USER'S GUIDE WITH OWNER ALL ELECTRIC WIRING AND PLUMBING MUST BE DONE
More informationPARTS FOR OTHER EMBROIDERY MACHINES
PARTS FOR OTHER EMBROIDERY MACHINES PARTS FOR SINGER 114K & 114W, TREASURE and other "FREE HAND" CHAINSTITCH EMBROIDERY MACHINES - 8056-2 Nipple #2-8056-3 Nipple #3-8056-4 Nipple #4-8056-5 Nipple #5-8056-6
More informationThink precision, Think HSS REAMING
Think precision, Think HSS REAMING SUMMARY REAMING TOOLS 2 Zoom on a reamer 3 Which HSS for maximum efficiency? 4 Coatings for the best performance 5 Vocabulary 6 Choose the right design 7 Types of bevel
More informationPrecision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationGENERAL INFORMATION ORDERING INFORMATION
GENERAL INFORMATION Lenco 2 THE LENCOSPOT MARK II Autobody Dual-Spot Welder Offers All These Features: Protected Control Panel Streamlined Construction On/Off Indicating Switch Solid State Timer Tool Storage
More informationAbout Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
More informationTOLL FREE: (866) 591-7792. E-Mail: techmail@vigoindustries.com. www.vigoindustries.com VANITY SPECIFICATIONS. VANITY COMPONENTS Model VG09042K1
VANITY SPECIFICATIONS VANITY COMPONENTS Model VG09042K1 MODEL VG09042K1 FEATURES Freestanding cabinet Soft closing sliding cabinet drawer hardware White, single hole ceramic sink Cabinet ships assembled
More informationMachine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
More informationGLASTAR SERVICE BULLETIN 36, SUPPLEMENT A
MANDATORY Note This publication supplements GlaStar Service Bulletin 36, which remains in effect; it does not supersede it. Subject: Auxiliary fuel tank sump drains Applicability: Auxiliary fuel tank installations
More informationINSTALLATION OF A BAY WINDOW
INSTALLATION OF A BAY WINDOW Installation of a Bay Window These instructions relate to the replacement of an existing bay window or replacement of a straight window with a new bay window, in an opening
More informationCeta Form Bits & Accessories
Ceta Form industrial quality bits program helps workshops, factories, assembly lines and technicians in various trades to increase the efficiency of their businesses thanks to durability of our bits which
More informationLunette 2 Series. Curved Fixed Frame Projection Screen. User s Guide
Lunette 2 Series Curved Fixed Frame Projection Screen User s Guide Important Safety and Warning Precautions Please follow these instructions carefully to ensure proper maintenance and safety with your
More informationRadianceRail Installation Guide
RadianceRail Installation Guide Installing RadianceRail with CableRail by Feeney... 2 Installing CableRail by Feeney for RadianceRail... 7 Installing RadianceRail Stairs with CableRail by Feeney... 10
More informationW I T H I N J O I ST S I N STA L L AT I ON
Radiantec W I T H I N J O I ST S I N STA L L AT I ON I N S TA L L AT I O N S U P P L E M E N T 260 Joists When tubing is placed beneath a joisted floor system, it is weaved between the joists and supported
More informationInstallation Instructions
READ BEFORE INSTALLING UNIT For Slider Casement Air Conditioners To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges that may be exposed:
More informationAdvantages and application of PCD and CBn tools
PCD and CBN tools Advantages and application of PCD and CBn tools Powerful and economical Tools with PCD and CBN cutting edges are the ideal solution for difficult-to machine, highly abrasive materials.
More informationWaekon Gold. Test Lead Master Kit. Tight Spot Test Lead Kit. Micro Mate Terminal Adapter Set. Magnetic Test Lead Ground Lug
Sharp, adjustable depth contact tip to penetrate corrosion or metal coatings for a good connection. Limited Lifetime warranty. 1) Universal Magnetic Ground Lug Stop searching for a good place to clip your
More informationDRAIN KING & PLUNGERS
DRAIN KING & PLUNGERS DRAIN KING DRAIN UNCLOGGERS 2-008 340 Complete kit Drain King 0ft. Hose Faucet Adapter 2 2-008 2-00 2-02 2-00 86 For -/2" to 3" Drains 2 2-02 50 For " to 2" Drains 2 2-04 750 For
More informationStainless Steel Cable Assemblies to Enhance Any Railing and Any View!
2014 Feeney (9/14) King Architectural Metals Stainless Steel Cable Assemblies to Enhance Any Railing and Any View! Standard Cable Assemblies Easy-to-install, prefabricated cable assemblies are an attractive,
More informationTopSky DLG Installation Manual
TopSky DLG Installation Manual Attention: Because after the compound materials solidify, there will be ammonia iris on the surface, which affect the bonding strength afterwards. Please polish with sandpaper
More information4-Speed Kick Start Kit
4-Speed Kick Start Kit 22-1020 Installed 22-1042 Installed 22-1042 Heavy Duty Kickstart Kit features a chrome smooth thick wall kick cover and heavy duty kick start arm. Fits all 4-Speed Big Twin 1936-84.
More informationMETALWORKING PRODUCTS. Deep hole drilling Product catalogue and application guide
METALWORKING PRODUCTS Deep hole drilling Product catalogue and application guide AB Sandvik Coromant Not only a tool supplier Sandvik Coromant is the No.1 supplier of cutting tools for the metalworking
More informationSlide the new steering column shaft through the steering column from the driver compartment.
Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.
More informationRayClic Connection System Installation Instructions
F M -W RayClic Connection System Installation Instructions RayClic WARNING: Shock Hazard 718K Pipe Heating Cable with HWAT, IceStop, also Listed De-icing and and XL-Trace heating Snow Melting Equipment
More informationHow To Install An Intercom Or Door Phone System For Your Home Or Business. Provided by www.intercomsonline.com
How To Install An Intercom Or Door Phone System For Your Home Or Business. Provided by www.intercomsonline.com If you decide you want to install a wired intercom or door phone system in your home or business,
More informationMicrio WS1 Replacement Wind Speed Sensor and WC1 Replacement Wind Compass Sensor for Raymarine ST50 and ST60 Wind Instruments. Rev 4.
Micrio WS1 Replacement Wind Speed Sensor and WC1 Replacement Wind Compass Sensor for Raymarine ST50 and ST60 Wind Instruments. Rev 4.1 The Micrio WS1 Wind Speed Sensor and WC1 Compass Sensor are direct
More informationGEOMETRY OF SINGLE POINT TURNING TOOLS
GEOMETRY OF SINGLE POINT TURNING TOOLS LEARNING OBJECTIVES Introduction to Features of single point cutting tool. Concept of rake and clearance angle and its importance System of description of Tool geometry
More informationHome"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw
Home"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw Milling of Grooves, Elongated Slots and Break-throughs - Course: Techniques for machining of material. Trainees' handbook of lessons (Institut fr Berufliche
More informationThe "DAVID" Steam Engine By Alan Marconett Hobbit Engineering HTTP://WWW.HobbitEngineering.com Alan@HobbitEngineering.
The "DAVID" Steam Engine By Alan Marconett Hobbit Engineering HTTP://WWW.HobbitEngineering.com Alan@HobbitEngineering.com (c) 2/20/03 The David steam engine is a simple oscillating steam engine, many plans
More informationSERIES 238 WINDOWS. NOTE: Read instructions completely before attempting any installation.
1 Installation Instructions SERIES 238 WINDOWS Page 2: Page 3-4: Page 5: Page 6: Page 7: Opening Preparation and Wood Buck Installation Installation Instructions for Series 238 WINDOWS Figure 1: Buck preparation
More information