Simply protect THE GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES

Transcription

1 CCTV SOLUTIONS Simply protect THE GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES

2 Contents Objectives and functions of a closed circuit television system Examples of implementation of a closed circuit television system Selection and choice of a closed circuit television system Key products of a closed circuit television system Glossary Catalogue pages

3 Analog Analog, IP or composite solutions: to identify the solution which is best suited to your requirements, you should: or IP? efine the areas of major safety concerns and detail what d is to be monitored; for each area that needs to be monitored define the detail of the images in question (image quality) and the level of lighting; define the basic characteristics of the video cameras; consider the advantages of a wired structure in regards to the traditional structure. Small installation Small business, car garage Small/medium installation Business, parking Small/medium installation Supermarket Broad installation Shopping centre ANALOG SOLUTION 1 video camera Plug&Play Kit STANDARD : ANALOG SOLUTION The standard being from two to sixteen video cameras IP SOLUTION for high resolution MIXED SOLUTION CCTV/IP with wire structuring IP SOLUTION With wire structuring zoom the advantage of IP technology Thanks to high definition (HD et Full HD), a scene filmed in recognition mode can be zoomed to enable persons to be identified. CCTV solutions catalogue 1

4 objectives and functions of a closed circuit television system Guarding of property Allowing an area to be open to the public while providing protection against theft in shops, car parks or enclosures. The CCTV system facilitates live or delayed (when recording) monitoring of one or more areas of the building. Enclosure, car park, sales area, etc. Access monitoring Monitoring access to buildings or premises outside opening hours can not only detect intrusions, but also trace incidents or malicious acts. During periods when the building is in use, the CCTV system enables you to manage the opening of accesses by detecting the presence of a person near to an exit, or by working in conjunction with visitor access controls. Recording access to a building Event monitoring When connected to other systems installed in a building or premises, the CCTV system can display the images from a camera associated with a specific event. Intrusion: immediate verification and recording on detection of intrusion Fire: verification of the presence of fire in the area concerned Technical alarm: verification of a technical problem with the machinery 2

5 Filming The main function of a camera is to film a scene live. For example, it may be interesting to show customers in a shop that the premises are monitored by CCTV by visibly displaying the images on a screen connected directly to a camera. Besides being a deterrent, it allows shop workers to keep an eye on one or more scenes from a single location in the store. Recording Depending on the sensitivity of the scene to be visualised (or the type of building), it may also be necessary to save the images. This enables you to review the events that take place in order to better interpret them (in the case of shoplifting, for example). Be careful not to fall into the trap of continuous recording: in addition to (relatively) quickly filling the hard drive, it also complicates the search for a specific event among the recordings. Recordings should be programmed, as is relevant, focusing, for example, on access to the site during certain hours. Visualising and analysing Whether it is accessing the video channel for one or multiple recorders or accessing their recordings, it is possible to install dedicated video surveillance software at one or more locations (e.g. control station, police station, etc.). Visualisation can also be performed from a remote location using a smartphone or computer to enable monitoring at your leisure. Example: just visualisation Coaxial cable Analog cameras Screen Example: visualisation and recording With monitoring software Cameras Recorder CCTV solutions catalogue 3

6 Examples of implementation of a closed circuit television system Shops This is to monitor and record just a few areas (usually the main entrance, product display area and cash register). An effective solution is offered by CCTV kits, expandable up to 4 cameras. Simple and discreet, thanks to their compact size, they allow remote viewing. Supermarkets This type of establishment necessitates the monitoring and video recording of numerous small and large areas, both internally and externally. The usual requirements for external areas are: surveillance of the stock loading/unloading area and car parks. The internal areas to be monitored are: the product display areas, check out and warehouse. The solution is a bespoke design where all devices are monitored and controlled from a monitoring station. 4

7 Warehouses This type of establishment necessitates the monitoring and video recording of various small and large areas, both internally and externally. The usual requirements for external areas are: surveillance of stock loading/ unloading areas, the sides of the building and parking lots. The internal areas to be monitored are: the warehouse and the loading/unloading area. The solution is a bespoke design, where all devices are monitored and controlled from a local switchboard or a reception, with an operator present during the day. If necessary, it is possible to centralise the remote management of several sites. CCTV solutions catalogue 5

8 selection and choice of a closed circuit television system When installing a simple CCTV system, we recommend that you follow the four steps below. If the installation has to meet stricter safety requirements, please contact your local Legrand sales office. Step 1 DEFINITION OF THE NUMBER OF AREAS TO MONITOR Perform a study with your client using a map of the area to be monitored. Step 2 SPECIFICATION OF THE EXPECTED RESULTS FOR EACH AREA TO BE MONITORED The expected results should be agreed with the customer for each area to be monitored. In most cases, this will be one of the following objectives: identification, recognition, detection of intrusions. For a description of the expected results, please refer to standard EN , of which the following is an extract: The size of an object/target on the monitor screen should have a relation to the operator task, for example: identification (facial identification), recognition (complete identification) or monitoring (overview). If the target is a person and the CCTV system has an installed limiting resolution of better than 400 TV lines, the recommended minimum sizes of this target are: a) for identification (facial identification), the target should represent not less than 120% of the image height. b) for recognition (complete identification), the target should represent not less than 50% of the image height. c) for monitoring (overview), the target should represent not less than 10% of the image height. The figure opposite shows the relative size of a person (target) on the screen. Identification recognition surveillance 180 % 120 % 100 % 50 % 30 % 10 % 6

9 Step 3 SPECIFICATION of the number of cameras and their positions: The quantity of results expected determines the number of cameras required. For each camera, the most suitable installation position must be identified according to the following parameters: the size of the objects to be observed (expected results), the distance between them and the installation requirements for the camera (internal/external, wall/ceiling/flush-mounting, etc.). CAUTION Ensure that the cameras are used in accordance with the laws and regulations in force, both in terms of privacy and staff safety. the images, sounds, voices and names recorded are personal - and sometimes sensitive - data - which may also be protected by copyright or third party intellectual property rights. therefore, any person using the equipment must comply with the following: - strict compliance with legislation regarding the protection of personal data; - respect for data security obligations; - respect for image and representation rights, as well as all requirements in terms of copyright and intellectual and industrial property rights. Legrand cannot be held responsible for any illegal use of its products by its customers. Step 4 Selection of the most appropriate equipment to achieve the desired results: It is now possible to identify the necessary products for installation of the system: cameras, video recorders, screens, accessories. CAMERAS: Once all the information from the previous step has been gathered, it is possible to identify the most suitable compact cameras, using the simple user tables provided for this family of products. If compact cameras cannot be used due to the requirements of certain applications, high performance modular cameras are also available. For each one, it is possible to select the most suitable accessories (e.g. supports, housings, IR illuminators, lenses). Digital video recorders: To be selected based on the number of cameras to be connected and the secondary functions provided. SCREENS: To be selected based on display dimensions and available space. CCTV solutions catalogue 7

10 the cameras key products in a closed circuit television system As the cameras do not all offer the same visualisation function, it is important to carefully select an appropriate camera, taking into account the following points: The installation environment Waterproof products (IP 55 or IP 66) can be installed outdoors. if there is a risk of defacement, products must be vandal resistant (IK 10). compact and modular cameras remain visible, while dome cameras, mini-cameras and hidden cameras facilitate covert surveillance. Examples The scene to be filmed How far is the scene to be filmed from the location where the camera is to be installed? What are the dimensions of the scene to be filmed? Are the dimensions fixed and precise (door or entrance)? -> Fixed or adjustable focal length. Are the dimensions variable (wide angle and zoom)? -> Camera with zoom or high resolution camera (megapixels). is the scene wider than the camera's field of view? -> Motorised dome camera Cat.No Cat.No Visitors should be informed that a site has CCTV Cat.No

11 Day image Night image Installation recommendations Install the cameras at a height of 3 to 4 metres. The camera stand (housing, support, etc.) should enable it to be electrically insulated from the ground (to avoid ground loops). The camera must be connected to the power supply with strict regard for phase and neutral, as cameras connected to alternating current (230 V) use the network's 50 Hz frequency for synchronisation: if all the cameras are connected correctly, they will also be synchronised. Performance of the lighting systems strongly depends on the type of surfaces illuminated (reflectance) and the spectrum of light generated. When choosing the type of camera, you should take into account the fact that colour cameras require 10 times more light than black and white cameras. The amount of light on the scene to be observed should in practice be 10 times the minimum quantity of light required by the camera. The reference parameter to consider in order to choose the correct camera based on the available light is the "sensitivity" of the camera. The following table gives the brightness values for certain specific conditions. Day images Day image Correct positioning of the camera: night vision is clear and sharp. Correct positioning of the camera: the image remains crisp and clear, regardless of the position of the sun. Night image Incorrect positioning of the camera: an intense light source is located in the image field. It would be preferable to position the camera in such a way as to exclude the light source from the field. Examples: brightness values Direct sunlight Indirect light on a clear day Daylight on a cloudy day Inside an office Minimum illumination for comfortable reading Corridor and outdoor work area lighting Sunset Major road lighting Secondary road lighting Sunset (beginning) Sunset (end) Full moon Crescent moon 50,000 lux 10,000-20,000 lux 1,000-5,000 lux lux 300 lux lux 10 lux 15 lux 5 lux 10 lux 1 lux 0.3 lux 0.1 lux CCTV solutions catalogue 9

12 recorders key products in a closed circuit television system Insofar as it is impossible to constantly monitor all installations, scenes should be recorded for later review. Digital video recorders complete a CCTV installation and must be chosen according to the following criteria: Number of cameras The type and number of recorders are determined by the number of cameras for which images must be recorded. However, in cases where the number of installed cameras is expected to increase, we recommend that this upscaling be taken into account by choosing a recorder with a larger number of inputs. When the total number of cameras is greater than or equal to the capacity of a 16-input recorder (analog or IP), it is still possible to use one (or more) central management point(s) as long as the recorders are connected to the same network (local or remote). Type of recording Whether you want continuous or event-related recording, the duration of data retention and image quality determine the size of the storage medium (hard disk). Some recorders also offer the ability to add hard disks, while others do not. Positioning The installation location of the recorder is an important factor to bear in mind: need to access the controls on the front (or vice versa), installation in a computer cabinet or housing, direct installation into a rack. 4-channel recorder Cat.No channel recorder Cat.No

13 screens key products in a closed circuit television system Analysis or verification of a scene may be performed: Live The image from the camera is transmitted to a screen or to another remote video support. Recorded The image is stored by the recorder for viewing on demand. However, it is possible to combine the two modes of use, i.e. a recorded scene can be displayed directly on the screen. Local The screen is connected directly to the camera or the recorder. Remote Internet-based visualisation via a PC or a smartphone. Single channel or multichannel mode The recorders allow simultaneous viewing of multiple video channels on one screen (windowing). Screenshot for 1-channel recorder Screenshot for 8-channel recorder Smartphone CCTV solutions catalogue 11

14 Transmission and connection key products in a closed circuit television system This function ensures the link between the above functions. You should select whether the installation will be analog or IP: An analog video signal can be transmitted: Via coaxial cable: this is an easy to implement solution requiring no additional programming or products. The length of each connection is limited to 300 m. Via twisted pair (FTP): this can be integrated into the structure's wiring and enables you to switch to an all-ip solution. Transmitters and receivers (baluns) must then be installed at each end of the connection. By using amplified transmitters and receivers, the length of the connection can be increased to 1200 m. The power supply to these units is typically 12 V and can be provided: - Via an independent power supply for each camera, located close-by. - Via a centralised power supply for multiple cameras. Connection to the above system can be achieved using composite cables integrating the coaxial cable and two power cables. Choosing twisted pair (PoA) for powering analog cameras enables migration to an IP or PoE solution when connecting to the same network (local or remote). An IP video signal must be transmitted: Via twisted pair (FTP): enabling the installation of several other cameras if the IP installation has been correctly dimensioned. The power supply to these units is typically 12 V and can be provided: - Via an independent power supply for each camera, located close-by. - Via a centralised power supply for multiple cameras. Connection to the above system can be achieved using composite cables integrating the coaxial cable and two power cables. - Via the network, if it is PoE (Power over Ethernet) compatible. 12

15 Glossary Advanced automatic path: Similar to the single automatic path function, except that the movement follows a path which can be programmed in any direction. For example, it can be programmed by saving a manual path from the control station. Compact or all-in-one: Camera supplied with lens and mechanism already affixed. The form of the mechanism allows for wall-mounting and it is usually equipped with protection to prevent rain water from entering. Dome: Camera supplied with lens and mechanism already affixed. The format of the mechanism allows mounting on the ceiling or a suspension arm. The translucent dome masks the camera angle. Fixed Focus: Lens with fixed focal length and camera angle. Focal length: This value, measured in millimetres, is directly related to the angle of observation. A short focal length offers a wide-viewing angle, while a long focal length offers a telephoto effect with a smaller viewing angle. Image quality: An image is defined by its resolution. There are 6 formats (the values in brackets are in pixels): QCIF (176 x 144) CIF (352 x 288) 2CIF (704 x 288) 4CIF (704 x 576) HalfD1/HD1 (360 x 576) D1/fullD1 (720 x 576) HD 720 (1 280 x 720) HD (1 920 x 1 080) WD1/960H (960 x 576) HD 1080 HD 720 Mini-camera : The camera is supplied complete with lens and can easily be concealed because of its small size. Modular camera: Camera supplied without lens, so an appropriate lens can be affixed. Motorised camera: Camera capable of extremely fast movement. It can change position very quickly and follow the movements of any object/target. PoA (Power over Analog): Supplies power to an analog camera via a twisted pair cable. Requires the installation of baluns at the camera. PoE (Power over Ethernet): Supplies power to an IP camera via the network cable. Requires the installation of a PoE injector as power supply. Recording quality: The recording quality depends on the resolution of the recorded image and the number of images in one second of recording. Resolution : The resolution indicates the quality of the image reproduced. The quality of the image captured by a camera is defined by the number of vertical lines. The current industry standard regarding the resolution of CCTV cameras is 330 lines for colour cameras and 380 lines for black and white cameras. The number of lines that a camera must produce to be termed a "high resolution" camera is not defined by any standard. According to current manufacturing standards, a "high resolution" colour camera generally provides more than 420 lines, while a "high resolution" black and white camera provides more than 480 lines. Sensitivity: This refers to the camera's ability to reproduce a video signal with a particular brightness value, which is the minimum amount of light (measured in lux) necessary to obtain a video signal. The higher the sensitivity of the camera, the lower the quantity of light required to obtain a video signal. A high-sensitivity camera will also require less light to obtain a good video image. Be careful not to confuse the minimum required quantity of light (sensitivity) with the ambient lighting. Although these two values are both measured in lux, the amount of light detected by the camera is that reflected by objects and not that coming from the ambient lighting. Simple automatic path: the motorised camera moves automatically along a programmable path that is repeated cyclically. The movement follows linear paths between predetermined intermediate points. Types of screen connection: The maximum resolution depends on the connection type. Coaxial: 720 x 576, VGA: 1024 x 768, HDMI: 1920 x 1080 Varifocal: Lens which enables manual adjustment of the focal length. These lenses are designed to be light and compact and can be used in numerous situations. For example, if a 6 mm fixed lens is required, a mm varifocal lens, adjusted to be fixed at 6 mm, could be used. Zoom: Lens which enables the physical characteristics of its focal length to be modified in order to cover a great distance. These lenses are classified according to their magnification (x6, x10, etc.). Manual and motorised versions are available on the market. 4CIF QCIF CIF CCTV solutions catalogue 13

16 IP network insist on reliable and scalable solutions cctv kit IP cameras adapted to your network To implement high-quality IP solutions, it is vital to have a reliable bandwidth which ensures a certain level of output. With Legrand cameras, you only need 1.5 Mbps to 4 Mbps of bandwidth to get a high-quality image. A scalable solution Legrand solutions are scalable and allow you to manage an analog installation and an IP system using the same software. Our IP products are ONVIF-compliant to enable them to be integrated into third-party software for integrators. Compact and dome cameras Standard and high resolution dvr, vms software Baluns, power supply, wiring accessories Monitors Dome and compact cameras Motorised and modular cameras Accessories encoders The Open Network Video Interface Forum (ONVIF) is an industry group dedicated to the development of standards relating to open IP video networking enabling the use of compliant products over non-proprietary networks. Please note Legrand offers on its products the ONVIF 2/Profil S on cameras and NVR. Do not hesitate to contact us in order to know if the installation you are about to set up is compliant with our products. Network video recorders, monitors, vms software Legrand cabling system LCS 2 14

17 ANALOG CCTV P. 18 Kit 17'' and 7'' P. 19 Kit complementary equipment, compact cameras and monitors P. 19 Kit complem sories P. 28 Compact and dome cameras P. 30 Motorised cameras and accessories P. 31 Special and modular cameras, accessories P. 34 Standard DVR P. 34 High resolution DVR P. 35 VMS software P. 36 Baluns P. 37 Power supply P. 37 Wiring accessories P. 39 LCD color monitors 7", 17", 19" P. 39 LCD color monitors 22", 32" IP CCTV P. 44 Dome cameras P. 45 Compact cameras P. 46 Motorised cameras P. 46 Modular cameras P. 47 Accessories P. 48 Encoders P. 50 Network video recorders P. 52 LCD color monitors 17", 19", 22", 32" P. 53 VMS software P " LCS2 cabinets P. 54 Power over Ethernet (PoE) injectors Midspam P. 54 Cables 15

18 Choose your analog camera Type of visualisation The table opposite shows how to go about choosing your camera on the basis of the positioning distance and type of visualization required. 1.2 m to 1.5 m 2 m 3 m 4 types of camera: Compact: camera supplied with lens and mechanism already affixed. Wall mounting Dome: camera supplied with lens and mechanism already affixed. Wall mounting or suspension arm. Special: camera equipped for a specific function, e.g. a smoke detector Motorised: camera capable of extremely fast movement. Able to follow the movements of any object/target. 2 types of lens: Fixed: fixed lens aperture. Varifocal: enables manual adjustment of the focal length. For example, if a 6 mm fixed lens is required, a mm varifocal lens, adjusted to be fixed at 6 mm, could be used. CAMERA WITH FIXED LENS - Distance between the camera and the target to be filmed. CAMERA WITH varifocal lens - Distance between the camera and the target to be filmed. 5 m 6 m 10 m 13 m 20 m 1.5 m to 3 m 3 m to 4 m 4 m to 7 m 7 m to 15 m 15 m to 30 m 30 m to 60 m 16

19 NARROW SHOTS (Identification) NARROW SHOTS (Recognition) WIDE SHOTS (Classification) WIDE SHOTS (Detection) 1.5 m 2.7 m 6 m 13 m 2 m 3.6 m 8 m 17 m Compact: Cat.Nos /40 Dome: Cat.Nos /01/03/05 Special: Cat.Nos /36/ Compact: Cat.No 4, Dome: Cat.No Compact: Cat.Nos /40 Dome: Cat.Nos /01/03/05 Special: Cat.Nos /36/39 Compact: Cat.No 4, Dome: Cat.No Compact: Cat.Nos /40 Dome: Cat.Nos /01/03/05 Special: Cat.Nos /36/39 Compact: Cat.No 4, Compact: Cat.Nos /40 Dome: Cat.Nos /01/03/05 Special: Cat.Nos /36/39 Compact: Cat.No 4, Compact: Cat.Nos /16/15/42/44 Dome: Cat.Nos /04/06/08/20/07/09 Motorised: Cat.Nos /22/23/24/25/34 Motorised: Cat.Nos /22/23/24/25/34 Motorised: Cat.Nos /23/24/25/34 Motorised: Cat.No 4, Compact: Cat.Nos /16/15/42/44 Dome: Cat.Nos /04/06/08/20/07/09 Motorised: Cat.Nos /22/23/24/25/34 Motorised: Cat.Nos /22/23/24/25/34 Motorised: Cat.Nos /23/24/25/ Compact: Cat.Nos /16/15/42/44 Dome: Cat.Nos /04/06/08/20/07/09 Motorised: Cat.Nos /22/23/24/25/34 Motorised: Cat.Nos /22/23/24/25/ Compact: Cat.Nos /16/15/42/44 Dome: Cat.Nos /04/06/08/20/07/09 Motorised: Cat.Nos /22/23/24/25/34 Motorised: Cat.Nos /22/23/24/25/34-17

20 CCTV kit: 7" CCTV kit: 17" Technical characteristics p. 71 Pack Cat.Nos CCTV kit: 7" CCTV kit consisting of: - 4-input DVR (Cat.No ), 7" LCD monitor (Cat.No ) - 1 compact outdoor camera with IR capabilities and 3.6 mm fixed lens (Cat.No ), stabilised power supply with plastic housing 12 Vdc 2.5 A (Cat.No ) - DVR remote control supplied The kit can be expanded with up to 4 cameras Pack Cat.Nos CCTV kit: 17" CCTV kit consisting of: - 4-input DVR with LAN (Cat.No ), 17" LCD monitor (Cat.No ) - 1 compact outdoor cameras with IR capabilities and 3.6 mm fixed lens (Cat.No ), stabilised power supply with plastic housing 12 Vdc 2.5 A (Cat.No ) - DVR remote control supplied The kit can be expanded with up to 4 cameras 18

21 CCTV kit: complementary equipment Technical characteristics p. 72 Pack Cat.Nos Indoor cameras Indoor Day & Night minicamera, 3.6 mm lens Sony 1/3 sensor, resolution 420 TV lines Min. illumination of 0.05 lux IP 30 / IK 07 Power supply: 12 Vdc max. 120 ma, not supplied Indoor Day & Night dome camera, 3.6 mm lens Sharp 1/3" sensor, resolution 540 TV lines Min. illumination of 0.05 lux IP 30 / IK 07 White body camera Power supply: 12 Vdc max. 70 ma, not supplied Outdoor cameras Outdoor Night & Day camera, 3.6 mm lens CMOS 1/3" sensor, resolution 600 TV lines LED illumination distance 20 m Min. illumination 0 lux sensitivity with IR LED ON IP 66 / IK 06 Grey/black body camera with fixing bracket supplied Power supply: 12 Vdc max. 315 ma with IR LED ON, not supplied Outdoor Day & Night camera with ICR, mm varifocal lens Sony 1/3" sensor, resolution 700 TV lines LED illumination distance 35 m Min. illumination 0 lux with IR LED ON IP 66 / IK 07 (except glass IK 06) Light Black body camera with fixing bracket supplied Power supply: 12 Vdc max. 430 ma with IR LED ON, not supplied Pack Cat.Nos LCD monitors " LCD color monitor with adjustable table support and IR remote control supplied Power supply: 12 Vdc (Power supply supplied) " active matrix color TFT LCD Monitor Picture format: 4:3, optimal resolution of 1280 x 1024 Terminals: BNC (IN/OUT), DC VGA, S-VIDEO Power supply: 12 Vdc (Power supply supplied) Power supplies Stabilised power supply in plastic housing Input: 230 Vac, output: 12 Vdc-2.5 A Protection rating: IP 30 Protection rating against mechanical impact: IK Stabilised power supply in DIN plastic housing (4 modules) Input: 230 Vac - 50 Hz, output: 12 Vdc A Plug-in power supply: 12 Vdc A Miscellaneous accessories Passive UTP video balun, maximum distance of up to 300 metres between the transmitting balun and the receiving balun, and up to 600 metres between the transmitting balun and the active video receiver (Cat.No ) BNC connector with plastic housing Crimping tool Video surveillance sign in English V plug connector with screw terminals V plug connector with cable IR LED for indoor/outdoor powered at 12 Vdc 30 m 19

22 Choosing the right devices range of compact and dome cameras characteristic (1) use INDOOR OUTDOOR OUTDOOR OUTDOOR OUTDOOR ip degree IP 30 IP 66 IP 66 IP 66 IP 66 tv lines ccd dimensions 1/4" 1/3" 1/3" 1/3" 1/3" lens (mm) varifocal sensitivity (lux) IR ON 0 IR ON 0 IR ON wdr icr s/n ratio (db) > 48 > 50 > 48 > 50 > 48 dimensions l x l x h (mm) 28 x x x x 78 x x 142 blc YES autoiris privacy zone power supply 12 Vdc 120 ma 12 Vdc 160 ma 12 Vdc 315 ma (IR ON) 12 Vdc 420 ma (IR ON) 12 Vdc 315 ma (IR ON) note IR 20 m IR 25 m IR 20 m 1: For the abbreviation used for describing the features of the cameras see p

23 COMPACT OUTDOOR OUTDOOR OUTDOOR OUTDOOR OUTDOOR OUTDOOR OUTDOOR IP 66 IP 66 IP 66 IP 66 IP 66 IP 66 IP /3" 1/3" 1/3" 1/3" 1/3" 1/3" 1/3" varifocal varifocal 9-22 varifocal varifocal 9-22 varifocal varifocal 0 IR ON 0 IR ON 0 IR ON 0 IR ON 0 IR ON 0 IR ON 0 IR ON YES YES YES YES > 48 > 52 > 52 > 50 > 52 > 52 > x 140 x x 90 x x 98 x x 56 x x 90 x x 98 x x 90 x 99 YES YES YES YES YES YES V 78 ma IR ON 12 Vdc 450 ma (IR ON) 12 Vdc 300 ma (IR ON) 12 Vdc 200 ma (IR ON) 12 Vdc 430 ma (IR ON) 12 Vdc 470 ma (IR ON) 12 Vdc 480 ma (IR ON) IR 100 m IR 35 m IR 50 m IR 20 m IR 35 m IR 50 m IR 35 m 21

24 Choosing the right devices range of compact and dome cameras characteristic (1) use INDOOR INDOOR OUTDOOR OUTDOOR OUTDOOR ip degree IP 30 IP 30 IP 66 IP 66 IP 66 tv lines ccd dimensions 1/3" 1/3" 1/3" 1/3" 1/3" lens (mm) varifocal varifocal sensitivity (lux) IR ON 0 IR ON 0 IR ON wdr icr s/n ratio (db) > 50 > 48 > 52 > 52 > 52 dimensions l x l x h (mm) 128 x x 50 x x x x 105 blc YES YES YES autoiris YES privacy zone power supply 12 Vdc 70 ma 12 Vdc 70 ma 12 Vdc 310 ma 12 Vdc 336 ma 12 Vdc 27 ma note IR 25 m IR 35 m IR 25 m 1: For the abbreviation used for describing the features of the cameras see p

25 DOME INDOOR OUTDOOR INDOOR OUTDOOR OUTDOOR IP 30 IP 66 IP 30 IP 66 IP /3" 1/3" 1/3" 1/3" 1/3" varifocal varifocal varifocal varifocal varifocal IR ON 0.03 IR ON IR ON YES YES YES YES YES > 52 > 52 > 54 > 54 > x x x x x 105 YES YES YES YES YES YES YES YES Vdc 150 ma 12 Vdc 300 ma 12 Vdc 210 ma 12 Vdc 320 ma 12 Vdc 285 ma IR 25 m IR 25 m IR 35 m 23

26 Choosing the right devices range of motorised cameras MOTORISED CAMERAS characteristic (1) use INDOOR INDOOR OUTDOOR OUTDOOR OUTDOOR ip degree IP 40 IP 40 IP 66 IP 66 IP 66 tv lines ccd dimensions 1/4" 1/4" 1/4" 1/4" 1/4" lens (mm) sensitivity (lux) wdr YES icr YES YES YES YES YES s/n ratio (db) > 52 > 52 > 52 > 52 > 52 dimensions l x l x h (mm) x 187,5 160 x ,5 x x 276,6 296 x m blc YES YES YES YES YES autoiris YES YES YES YES YES privacy zone power supply 12 Vdc 800 ma 12 Vdc 1000 ma 12 Vdc 2500 ma 12 Vdc 2000 ma 12 Vdc 2000 ma note 1: For the abbreviation used for describing the features of the cameras see p

27 Choosing the right devices range of modular cameras MODULAR CAMERAS characteristic (1) use INDOOR INDOOR INDOOR INDOOR INDOOR INDOOR ip degree IP 30 IP 30 IP 30 IP 30 IP 30 IP 30 tv lines ccd dimensions 1/3" 1/3" 1/4" 1/3" 1/3" 1/3" lens (mm) C/CS C/CS Built-in zoom lens mm (x36) C/CS C/CS C/CS sensitivity (lux) wdr YES icr YES YES YES YES s/n ratio (db) > 48 > 48 > 50 > 50 > 50 > 54 dimensions l x l x h (mm) 125 x 50 x x 50 x x 66 x x 66 x x 66 x x 71 x 64 blc YES YES YES YES autoiris YES YES YES YES YES YES privacy zone power supply 12 Vdc 100 ma Vac 12 Vdc 380 ma 12 Vdc Vac 12 Vdc 300 ma note 1: For the abbreviation used for describing the features of the cameras see p

28 Choosing the right devices range of special cameras SPECIAL CAMERAS characteristic (1) use INDOOR INDOOR INDOOR INDOOR OUTDOOR ip degree IP 30 IP 30 IP 30 IP 30 IP 66 tv lines ccd dimensions 1/3" 1/3" 1/3" lens (mm) sensitivity (lux) s/n ratio (db) > 48 > 48 > 50 dimensions l x l x h (mm) 36 x 36 x x x 60 power supply 12 Vdc 120 ma 12 Vdc 120 ma 12 Vdc 120 ma note Fake camera Fake camera 1: For the abbreviation used for describing the features of the cameras see p

29 The abbreviations used for describing the features of the cameras are detailed below N&D (NIGHT & DAY): camera capable of also recording images during night time, and therefore, under very low light conditions. Color images are recorded during the day, and black and white images during the night. Illuminating the scene being recorded always improves night performance. For this purpose, infrared LEDs fitted on infrared light sensitive cameras are very useful. ICR (IR Cut Removable): removable infrared light filter. Device for improving the performance of infrared light sensitive cameras. It provides sharper images with brighter colors during the day, and sharper black and white images during the night or under dim light conditions. Operation: during the day, an IR light filter is placed in front of the camera sensor. Under low light conditions (low visible light spectrum), the filter is mechanically moved, making the camera sensitive to infrared light. IR (Infra Red) Infrared portion of the light spectrum. Not visible to the human eye, but visible to the electronic camera sensor. LED emitting light that is within the infrared light spectrum. AUTO-IRIS This function automatically adjusts the brightness depending on ambient conditions, and is useful for outdoor applications where light variations are significant. TV Lines Horizontal resolution, maximum number of vertical lines within a frame that can be detected by the camera. This is an important parameter for defining the level of details of the image produced by the camera in optimum conditions. Good quality images are obtained starting from 380 TV lines. The maximum that can be used with a PAL signal is OSD (On-Screen Display): this is the on-board user interface in some cameras, used to adjust certain advanced features. This user interface is temporarily displayed as an inset in the video image. AGC (Automatic Gain Control): this function automatically adjusts the power of a (too weak or too strong) video signal to its optimum level, thus improving the image quality. AWB (Auto White Balance): this function adjusts the white balance (useful where indoor lighting is provided by compact fluorescent lamps). BLC (Back Light Compensation): this function compensates for backlighting, thus improving the view of objects and persons in the field close to the camera. Objects in the foreground might otherwise not be visible, since they would be in an area of shadow. HLC (High Light Compensation): this function corrects glare in the image by attenuating points that are too bright, so that the rest of the image is visible (glare from car headlights). WDR The wide dynamic range (WDR) function of a camera is intended to provide clear images even under back light circumstances where intensity of illumination can vary excessively, namely when there are both very bright and very dark areas simultaneously in the field of view of the camera. WDR enables the capture and display of both bright and dark areas in the same frame, in a way that there are details in both areas, i.e. bright areas are not saturated, and dark areas are not too dark. 27

30 CCTV analog: compact cameras /41/42/43/44 Technical characteristics p. 72 Pack Cat.Nos Fix lens Indoor color tube camera, 3.6 mm lens Sony 1/4" sensor, resolution 330 TV lines Min. illumination of 0.5 lux IP 30 / IK 04 White body camera with fixing bracket supplied Power supply: 12 Vdc max. 120 ma, not supplied Outdoor Day & Night camera, 6 mm lens Sony 1/3" sensor, resolution 420 TV lines LED illumination distance 25 m Min. illumination 0 lux with IR LED ON IP 66 / IK 08 (except glass IK 05) Grey body camera with fixing bracket supplied Power supply: 12 Vdc max. 420 ma with IR LED ON, not supplied Outdoor Night & Day camera, 3.6 mm lens SHARP 1/3" sensor, resolution 420 TV lines LED illumination distance 20 m Min. illumination 0 lux sensitivity with IR LED ON IP 66 / IK 06 (except glass IK 05) Grey/black body camera with fixing bracket supplied Power supply: 12 Vdc max. 315 ma with IR LED ON, not supplied Outdoor Night & Day camera, 3.6 mm lens CMOS 1/3" sensor, resolution 600 TV lines LED illumination distance 20 m Min. illumination 0 lux sensitivity with IR LED ON IP 66 / IK 06 (except glass IK 05) Grey/black body camera with fixing bracket supplied Power supply: 12 Vdc max. 315 ma with IR LED ON, not supplied Outdoor Day & Night camera, 3.6 mm lens Sony 1/3" sensor, resolution 700 TV lines LED illumination distance of 20 m Min. illumination 0 lux sensitivity with IR LED ON IP 66 / IK 06 (except glass IK 05) Grey body camera with fixing bracket supplied Power supply: 12 Vdc max. 200 ma with IR LED ON, not supplied Varifocal lens 4-9mm Outdoor color tube camera, 4-9 mm varifocal lens Sony 1/3" sensor, resolution 330 TV lines Min. illumination of 0.5 lux IP 66 / IK 06 Light black body camera with fixing bracket supplied Power supply: 12 Vdc max. 160 ma, not supplied Outdoor Day & Night camera, mm varifocal lens Sony 1/3" sensor, resolution 600 TV lines LED illumination distance of 35 m Min. illumination of 0.5 lux IP 66 / IK 06 Light black body camera with fixing bracket supplied Power supply: 12 Vdc max. 160 ma, not supplied Pack Cat.Nos Varifocal lens 4-9mm (continued) Outdoor Day & Night camera with ICR, mm varifocal lens Sony 1/3" sensor, resolution 700 TV lines LED illumination distance 35 m Min. illumination 0 lux with IR LED ON IP 66 / IK 07 (except glass IK 06) Light black body camera with fixing bracket supplied Power supply: 12 Vdc max. 430 ma with IR LED ON, not supplied Outdoor WDR Day & Night camera with ICR, mm varifocal lens Sony 1/3" sensor, resolution 700 TV lines LED illumination distance 35 m Min. illumination 0 lux with IR LED ON IP 66 / IK 07 (except glass IK 06) Light black body camera with fixing bracket supplied Power supply: 12 Vdc max. 480 ma with IR LED ON, not supplied Varifocal lens 9-22mm Outdoor Day & Night camera, 9-22 mm varifocal lens Sony 1/3" sensor, resolution 600 TV lines LED illumination distance 50 m Min. illumination 0 lux with IR LED ON IP 66 / IK 07 (except glass IK 06) Light black body camera with fixing bracket supplied Power supply: 12 Vdc max. 300 ma with IR LED ON, not supplied Outdoor Day & Night camera with ICR, 9-22 mm varifocal lens Sony 1/3" sensor, resolution 700 TV lines LED illumination distance 50 m Min. illumination 0 lux sensitivity with IR LED ON IP 66 / IK 07 (except glass IK 06) Light black body camera with fixing bracket supplied Power supply: 12 Vdc max. 470 ma with IR LED ON, not supplied Varifocal lens 10-65mm Outdoor Day & Night camera, mm varifocal lens Sony 1/3" sensor, resolution 540 TV lines LED illumination distance 100 m Min. illumination 0 lux with IR LED ON IP 66 / IK 08 (except glass IK 05) Grey body camera with fixing bracket supplied Power supply: 230 Vac max. 78 ma with IR LED ON 28

31 CCTV analog: dome cameras Technical characteristics p. 72 Pack Cat.Nos Fix Lens - Indoor cameras Indoor dome camera, 2.8 mm lens Sony 1/3" sensor, resolution 420 TV lines Min. illumination of 0.1 lux IP 30 / IK 06 White body camera Power supply: 12 Vdc max. 70 ma, not supplied Indoor Day & Night dome camera, 3.6 mm lens Sharp 1/3" sensor, resolution 540 TV lines Min. illumination of 0.05 lux IP 30 / IK 07 White body camera Power supply: 12 Vdc max. 70 ma, not supplied Varifocal lens - Indoor cameras Indoor dome camera, mm varifocal lens Sony 1/3" CCD sensor, resolution 700 TV lines Min. illumination of 0.01 lux IP 30 / IK 07 White body camera Power supply: 12 Vdc max. 150 ma, not supplied Indoor WDR Day & Night dome camera with ICR, mm varifocal lens Sony 1/3" sensor, resolution 700 TV lines Min. illumination 0.03 lux IP 30 / IK 08 White body camera Power supply: 12 Vdc max. 210 ma, not supplied Fix Lens - Outdoor camera Outdoor Day & Night dome camera, 3.6 mm lens Sony 1/3" sensor, resolution 600 TV lines LED illumination distance 35 m Min. illumination 0 lux with IR LED ON IP 30 / IK 07 (except glass IK 05) White body camera Power supply: 12 Vdc max. 336 ma with IR LED ON, not supplied Pack Cat.Nos Varifocal lens - Outdoor cameras Outdoor dome camera, mm varifocal lens Sony 1/3" CCD sensor, resolution 600 TV lines LED illumination distance 25 m Min. illumination 0 lux with IR LED ON IP 66 / IK 07 (except glass IK 05) White body camera Power supply: 12 Vdc max. 310 ma with IR LED ON, not supplied Outdoor Day & Night dome camera with ICR, mm varifocal lens CMOS 1/3" sensor, resolution 600 TV lines, LED illumination distance 25 m Min. illumination 0 lux with IR LED ON IP 66 / IK 07 (glass IK 05) White body camera Power supply: 12 Vdc max. 275 ma with IR LED ON, not supplied Outdoor dome camera, mm varifocal lens Sony 1/3" sensor, resolution 700 TV lines LED illumination distance 25 m Min. illumination 0 lux with IR LED ON IP 66 / IK 07 (except glass IK 05) White body camera Power supply: 12 Vdc max. 300 ma with IR LED ON, not supplied Outdoor WDR Vandal Proof / Day & Night dome camera with ICR, mm varifocal lens Sony HAD 1/3" sensor, resolution 700 TV lines, LED illumination distance 25 m Min. illumination 0 lux with IR LED ON IP 66 / IK 07 (except glass IK 05) White body camera Power supply: 12 Vdc max. 320 ma with IR LED ON, not supplied Outdoor Day & Night dome camera with ICR, mm varifocal lens Sony 1/3" sensor, resolution 700 TV lines, LED illumination distance 35 m Min. illumination 0 lux sensitivity with IR LED ON IP 66 / IK 07 (except glass IK 05) White body camera Power supply: 12 Vdc max. 285 ma with IR LED ON, not supplied 29

32 CCTV analog: motorised cameras and accessories Technical characteristics p. 73 Pack Cat.Nos Motorised cameras for indoor Indoor Day & Night camera, 12 x ( mm) optical zoom SONY 1/4" CCD sensor ICR filter, 0.7 (day) & 0.02 (night) lux sensitivity Auto-IRIS, auto-focus, BLC, AGC Resolution 500 TV lines 4 privacy masking zones, Pelco D / Pelco P protocols, 8 programmable presets IP 40 / IK 04 Grey body camera, ceiling mounting Power supply: 12 Vdc max. 800 ma, not supplied Indoor Night & Day camera, 27 x ( mm) optical zoom SONY 1/4" sensor ICR filter, 0.4 (day) & 0.02 (night) lux sensitivity Auto-IRIS, auto-focus, BLC, AGC Resolution of 550 TV lines 8 privacy masking zones, Pelco D / Pelco P protocols, 8 programmable presets IP 40 / IK 06 Grey body camera, ceiling mounting or wall mounting with accessories (not supplied) Power supply: 12 Vdc max ma, not supplied Motorised cameras for outdoor Outdoor Day & Night camera, 12 x ( mm) optical zoom SAMSUNG 1/4" sensor ICR filter, 0.7 (day) & 0.02 (night) lux sensitivity Auto-IRIS, auto-focus, BLC, AGC Resolution 500 TV lines 8 privacy masking zones, Pelco D / Pelco P protocols, 8 programmable presets IP 66 / IK 06 White body camera,wall mounting accessory supplied Power supply: 12 Vdc max ma, not supplied Outdoor Night & Day camera, 27 x ( mm) optical zoom SAMSUNG 1/4" CCD sensor ICR filter, 0.4 (day) & 0.02 (night) lux sensitivity Auto-IRIS, auto-focus, BLC, AGC Resolution 550 TV lines 8 privacy masking zones, Pelco D / Pelco P protocols, 8 programmable presets IP 66 / IK 06 White body camera,wall mounting accessory supplied Power supply: 12 Vdc max ma, not supplied Outdoor WDR Night & Day camera, 37 x ( mm) optical zoom SAMSUNG 1/4" CCD sensor ICR filter, 0.7 (day) & 0.06 (night) lux sensitivity Auto-IRIS, auto-focus, BLC, AGC Resolution 550 TV lines 8 privacy masking zones, Pelco D / Pelco P protocols, 8 programmable presets IP 66 / IK 06 White body camera,wall mounting accessory supplied Power supply: 12 Vdc max ma, not supplied Pack Cat.Nos Accessories for motorised cameras Wall bracket for indoor motorised camera Cat.No Ceiling bracket for outdoor motorised cameras Cat.Nos /24/ Angular bracket for motorised cameras Cat.Nos /24/25/ Pole strap for outdoor motorised cameras Cat.Nos /24/ Ceiling accessory for indoor motorised camera Cat.No False ceiling bracket for indoor motorised camera Cat.No Keypad with 3-axis joystick for controlling the new motorised cameras LCD display, multi-protocol remote control (RS485) up to 1000 m, selectable data transmission speed Power supply: 12 Vdc ma (power supply supplied) 30

33 CCTV analog: modular cameras CCTV analog: special cameras Technical characteristics p. 74 Technical characteristics p. 74 Pack Cat.Nos Standard cameras Indoor Day & Night camera for difficult light conditions SHARP 1/3" sensor, resolution 540 TV lines Min. illumination of 0.1 lux IP 30 / IK 04 Grey color, Wall & ceiling mounting not supplied Power supply: 12 Vdc max. 100 ma, not supplied To be equipped with lenses & housings Indoor Day & Night camera for difficult light conditions SHARP 1/3" sensor, resolution 540 TV lines Min. illumination of 0.1 lux IP 30 / IK 04 Wall & ceiling mounting Power supply: Vac, not supplied To be equipped with lenses & housings High resolution cameras Indoor Day & Night compact camera, 36 x ( mm) optical zoom Sony 1/4" sensor, resolution 550 TV lines ICR filter, 0.05 (day) & (night) lux sensitivity IP 30 / IK 04 Grey body camera, ceiling or wall mounting (not supplied) Power supply: 12 Vdc max. 380 ma, not supplied Indoor Day & Night camera with high sensitivity for difficult light conditions Night vision for infrared light sensitivity SONY 1/3" sensor, resolution 700 TV lines ICR filter, 0.8 (day) & 0.05 (night) lux sensitivity IP 30 / IK 04 Wall & ceiling mounting not supplied Power supply: 12 Vdc 90 ma, not supplied To be equipped with lenses & housings Indoor Day & Night camera with high sensitivity for difficult light conditions Sony 1/3" sensor, resolution 700 TV lines ICR filter, 0.8 (day) & 0.05 (night) lux sensitivity IP 30 / IK 04 Wall & ceiling mounting Power supply: Vac, not supplied To be equipped with lenses & housings Indoor WDR Day & Night compact camera with ICR Sony 1/3" sensor, resolution 700 TV lines IP 30 / IK 04 Grey body camera, ceiling or wall mounting Power supply: 12 Vdc 300 ma, not supplied To be equipped with lenses Pack Cat.Nos Special cameras Indoor Night & Day mini camera, 3.6 mm lens SONY 1/3" sensor, resolution 380 TV lines Min. illumination of 0.2 lux IP 30 / IK 04 Wall, ceiling, cupboard mounting suppllied Power supply: 12 Vdc 120 ma, not supplied Indoor Day & Night camera with spot ligth look, 3.7 mm conical lens SONY 1/3" sensor, resolution 420 TV lines Min. illumination of 0.05 lux IP 30 / IK 05 False ceiling mounting Power supply: 12 Vdc 120 ma, not supplied Indoor camera with smoke detector look, 3.7 mm conical lens Sony 1/3" sensor, resolution 700 TV lines Min. illumination of 0.01 lux IP 30 / IK 06 Ceiling mounting Power supply: 12 Vdc max. 120 ma, not supplied Dummies cameras Dummy dome camera, with housing of real camera and with a real lens Shape is identical to Cat.No Dummy compact camera, with housing of real camera and with a real lens Shape is identical to Cat.No

34 CCTV analog: accessories Technical characteristics p. 74 Pack Cat.Nos IR illuminators IR LED illuminator distance of 50 m Night vision for infrared light sensitivity IP 66 / IK 10 White casing with wall mounting (supplied) Power supply: 230 Vac Can be combined with outdoor camera housing Cat.No IR LED illuminator distance of 30 m Night vision for infrared light sensitivity IP 55 / IK 06 White casing with wall mounting (supplied) Power supply: 12 Vdc Camera brackets, swivels and housings Metal Housing for modular cameras Cat.Nos /31/32/33 Thermostatically-controlled case for outdoors installation in white metal with glass window IP 68, IK V power supply integrated A integrated 20W heater and ventilation Top opening, wall fixing included Pole mounting for housing Cat.No Wall bracket for indoor camera - 11 cm Wall bracket for indoor camera - 18 cm Pack Cat.Nos Lenses mm varifocal auto-iris lens mm varifocal auto-iris lens mm varifocal auto-iris lens Accessory CCTV tester Power supplies Stabilised power supply with plastic housing Input: 230 Vac, output: 12 Vdc A IP 30, IK Stabilised power supply with DIN plastic housing (4 modules) Input: 230 Vac - 50 Hz, output: 12 Vdc A Plug-in power supply: 12 Vdc A 32