The safest, longest-lasting, best performance power brushes on the market!
|
|
- Chad King
- 7 years ago
- Views:
Transcription
1 The safest, longest-lasting, best performance power on the market! imum operator safety Designed & engineered for maximum performance Perfectly balanced, vibration-free Longest brush life available due to its superior knot construction Threaded arbors for quick & easy mounting
2 High Performance Power Brushes from Walter Surface Technologies Power have long been used for edge and surface conditioning on a wide variety of materials. Unlike grinding wheels and other abrasives that remove base material along with surface contaminants, power work on the metal surface without removing the base material. Only the tips of the wires on a power brush hammer the metal surface like thousands of tiny ball pins to finish and work harden the surface. To withstand that kind of abuse, every Walter power brush is made from only the finest industrial grade materials. Combined with the latest manufacturing technology and strictest quality control, every Walter power brush ensures: imum safety Operator highest productivity Longest brush life WIRE CUP BRUSHES Excellent for light surface cleaning, rust and paint removal, etc. For angle grinders For heavy-duty brushing such as deburring, weld edge cleaning, removal of scale, spatter, heavy rust and corrosion, etc. WITH RING Safety supporting ring controls flaring to extend brush life. Once worn down to the ring, it can be removed to expose more wire for extra brush life.
3 Built with Safety in Mind! SAUCER-CUP TM BRUSHES Tightly knotted for maximum impact and long brush life. For surface cleaning such as removing paint, rust and corrosion. For angle grinders WIRE WHEEL BRUSHES STRINGER BEAD Extra narrow to clean pipe welds between passes, to brush in narrow grooves, etc. For angle grinders For surface cleaning after welding, to remove scale, spatter, rust and corrosion. For general surface cleaning and deburring applications. For bench and pedestal grinders MOUNTED WIRE BRUSHES For general surface cleaning, rust, scale and paint removal, etc. For straight grinders For heavy-duty brushing such as deburring, removing heavy rust and corrosion, etc.
4 CHOOSE THE RIGHT WIRE BRUSH FOR YOUR APPLICATION POWER TOOL USED Flat brushing Angle brushing Vertical brushing Vertical brushing Vertical brushing TYPE OF BRUSH Wire cup Saucer-cup Wire wheel Wire wheel Mounted COMPATIBLE GRINDER DIAMETER 4", 4 /2" 5", 6" 7", 9" 4", 4 /2" 5", 6" 7", 9" 4", 4 /2" 5", 6" 7", 9" Hubs are color-coded for easy identification. All bench grinders with suitable speed range All die grinders with suitable speed range WIRE CONSTRUCTION Crimped with ring Stringer Bead Crimped Crimped APPLICATION For surface cleaning, brushing and finishing of large flat surfaces. For flat surface brushing and cleaning, rust and scale removal, weld and edge cleaning. Heavy-duty cleaning with ticker wire and safety supporting ring. For weld cleaning and deburring in hard to reach places such as inside corners, edges and contours. For extra narrow cleaning, root passes on pipes, brushing in narrow grooves, etc. For cleaning wider root passes as well as removing scale, spatter and corrosion. Orange hub = mild steel Blue hub = stainless steel, aluminum For light deburring and similar cleaning jobs, to remove paint, rust, etc. For cleaning hard to reach areas such as pipe interiors and confined spaces. For heavy-duty applications such as removal of rust, corrosion and gasket. METAL SAFETY WITH WIRE BRUSHES To ensure longest brush life, maximum performance and safety when working with wire, always follow the safety tips below. Always wear eye, full face and body protection when working with or near wire. Always choose the proper diameter brush to match the rated diameter of the grinder. Never exceed the maximum operating speed indicated on the brush. Always ensure the wire brush used is of the highest quality. Lower quality wire tends to break and cause injury. For longest brush life, always work with the face of the brush only. Walter offers free special in-plant safety seminars to promote the safe use of power. Call us at: Walter is proud to have its Research, Development and Distribution Quality System certified under the International Standard ISO 900: 2008.
5 SAUCER-CUP TM BRUSHES STRINGER BEAD F Tightly knotted for maximum impact and long brush life. F For surface cleaning such as removing paint, rust and corrosion. 4" 5 8 " 3-H " 20, " 5 8 " 3-H " 5, " 5 8 " 3-H " 0, " 5 8 " 3-H 44.05" 20, " 5 8 " 3-H " 5, " 5 8 " 3-H " 0,000 0 WIRE CUP BRUSHES F Excellent for light surface cleaning, rust and paint removal, etc. 3" M0 x.25 3-D " 2, " M4 x D " 2, " 5/8" - 3-D " 2, " 5/8" - 3-E " 8, " M4 x D 32.08" 2, " 5/8" - 3-D 34.08" 2, " 5/8" - 3-E " 8,600 0 MOUNTED WIRE BRUSHES F For general surface cleaning, rust, scale and paint removal, etc. Dia. Width Order No. Wire 2 " 3-C " 20, " 3-C " 20, " 3-C " 20, " 4 " 3-C 0.008" 20, " 5 8 " 3-C 20.08" 20, " 3 4 " 3-C 25.08" 2, " 3-C 05.08" 3, " 3-C 08.08" 3, " 3-C " 20,000 0 F For heavy-duty brushing such as deburring, weld edge cleaning, removal of scale, spatter, heavy rust and corrosion, etc. 3" M0 x.25 3-F " 2, " M0 x.5 3-F 30.05" 2, " M4 x F " 2, " /2" F " 2, " 5/8" - 3-F " 2, " 5/8" - 3-F " 2, " M0 x.25 3-F 30.05" 2, " M4 x F 32.05" 2, " 5/8" - 3-F 34.05" 2, " 3-C " 20, " 3-C " 20, " 4 " 3-C " 20, " 5 8 " 3-C 70.08" 20, " 3 4 " 3-C 75.08" 2, " 3-C " 3, " 3-C " 3,000 0 MOUNTED WIRE BRUSHES F For heavy-duty brushing such as deburring, removing heavy rust and corrosion, etc. Dia. Width Order No. Wire 8 " 3-C " 20, " 3 8 " 3-C " 20, " 3-C " 20, " 3 8 " 3-C " 20,000 0 without shaft Dia. Width Arbor Order No. Wire 3" 3 8 " 2 " 3-C " 25, " 5 8 " 3-C " 20,000 0 Mandrel for wire 3 8 " 4 " Order No. 3-D " 4 " Order No. 3-D 009 WITH RING F Safety supporting ring controls flaring to extend brush life. Once worn down to the ring, it can be removed to expose more wire for extra brush life. 3" M4 x G " 2, " /2" G " 2, " 5/8" - 3-G " 2, " 5/8" - 3-G " 8, " 5/8" - 3-G " 8, " 5/8" - 3-G " 8, " 5/8" - 3-G " 6, " M4 x G " 2, " 5/8" - 3-G " 2, " M0 x.25 3-G " 8,600 0 ADAPTORS FOR WIRE BRUSHES Use these threaded adaptors to convert with 5/8"- arbor To M0 x.25 female 3-D 00 To M0 x.5 female 3-D 002 To 3/8" - 24 female 3-D 003 To 3/8" - 6 female 3-D 007
6 WIRE WHEEL BRUSHES STRINGER BEAD F Extra narrow to clean pipe welds between passes, to brush in narrow grooves, etc. Dia. Width Arbor Order No. Wire 6 " 5 8 " 3-K " 20, ½" 3 6 " 5 8 " 3-K " 5, " 4 " 5 8 " 3-K " 5, " 4 " 5 8 " 3-K " 0, " 4 " 5 8 " 3-K " 9, " 5 8 " 3-K " 20, ½" 3 6 " 5 8 " 3-K " 5, " 4 " 5 8 " 3-K " 5, " 4 " 5 8 " 3-K " 0,000 0 WIRE WHEEL BRUSHES (For bench and pedestal grinders) F For general surface cleaning and deburring applications. Dia. Width Arbor Order No. Wire 4 " 2 " 3-B " tool steel 6, " 7 8 " 4 " 3-B " tool steel 6, " 8 " 4 " 3-B 06.08" tool steel 6, " 7 8 " 4 " 3-B " tool steel 6, " " 4 " 3-B " tool steel 4,500 0" " 4 " 3-B 00.08" tool steel 3, " 7 8 " 4 " 3-B 60.08" stainless 6, " " 4 " 3-B 80.08" stainless 4,500 0 WIRE WHEEL BRUSHES F For surface cleaning after welding, to remove scale, spatter, rust and corrosion Dia. Width Arbor Order No. Wire 4" 4 " 5 8 " 3-L " 20, ½" 4 " 5 8 " 3-L " 5, " 3 8 " 5 8 " 3-L " 5, " 3 8 " 5 8 " 3-L " 0, " 4 " 5 8 " 3-L " 20, ½" 4 " 5 8 " 3-L " 5, " 3 8 " 5 8 " 3-L " 5, " 3 8 " 5 8 " 3-L " 0,000 0 Available at: All specifications and data are subject to change without notice. Copyright J.Walter Company Ltd. 202 All rights reserved. 98-E 309 (0-2) walter.com
Roloc TM. Discs. Easy to mount easy to change
Roloc TM Discs Provide a fast, efficient method for deburring, blending, finishing, removing tool marks and die polishing on all types of metals. Resist loading and shelling under severe operating conditions.
More informationRight Angle Grinder USA MADE FLAP DISCS
USA MADE FLAP DISC Right Angle Grinder CGW Offers the Most Extensive Line of Flap Discs in the Marketplace CGW flap discs blend and finish in one operation which replaces the traditional twostep grinding
More informationIt's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
More informationStainless Steel. Systems for. Finishing. The Efficient and Economical Way to Produce Exceptional Finishes. Now Includes
3M Abrasives and Power Tools for Stainless Steel Finishing Now Includes 3M Fibre Disc 987C for Exceptional Life! Systems for Stainless Steel Finishing The Efficient and Economical Way to Produce Exceptional
More informationNew in the PFERD Product Line 204
COMBICLICK Fibre Discs COMBICLICK fibre discs Silicon carbide SiC D The silicon carbide SiC type is suitable for working on aluminium, copper, bronze, titanium, high-alloy steels and fibre reinforced plastics.
More informationHAND TOOLS CATALOG. n Stringer Bead Brushes n Pipeliner Wheels n Pipeliner Files
P I P E L I N E HAND TOOLS CATALOG n Stringer Bead Brushes n Pipeliner Wheels n Pipeliner Files Table of Contents PFERD Milwaukee Brush Co. is proud to offer a complete line of surface finishing and weld
More informationSECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE
SECTION 15076 CEMENT-MORTAR LINED AND COATED (CML&C) STEEL PIPE PART 1 GENERAL 1.01 DESCRIPTION This section designates the requirements for steel pipe fabrication, test in shop, installation of steel
More informationHow To Use 3M Cubitron Ii Abrasives
3M Abrasives for Right-Angle Systems The Right Choice Cut, grind, finish and more with a world-class abrasive system that helps you work smarter, finish faster! 3 Your Power For metal fabrication and finishing
More informationDock Hardware & Accessory Products Catalog
Dock Hardware & Accessory Products Catalog Product Page # Product Page # Angle Brackets/Clips 8 Back Up Plate 5 Backing Plate/Hurricane Stop 10 Carriage Bolt Sets 4 Chain Retainer 10 Connector Pin Set
More informationON HARDTAIL KITS FOR ALL #103-0008 & #103-0009 (200 1982-2003 HARLEY DAVIDSON SPORTSTER MODELS
INSTALLATION INSTRUCTIONS TC BROS CHOPPERS PART #103-0008 (stock tire width) & #103-0009 (200 series tire width) WELD ON HARDTAIL KITS FOR ALL 1982-2003 HARLEY DAVIDSON SPORTSTER MODELS If downloading
More informationAbrasives. New High Performance Abrasives from Caterpillar
TOOLS AND SUPPLIES Abrasives New High Performance Abrasives from Caterpillar Choosing the correct abrasive product is very important in today s fast-paced work environment. Cat has combined a great selection
More informationBonded Abrasives. Precise cutting and grinding discs for many materials
Bonded Abrasives Precise cutting and grinding discs for many materials 1 sia Abrasives Your key to a perfect surface Many materials hide a secret. They keep their real beauty hidden. Only a professional
More informationS&W Race Cars and Components, Inc.
S&W Race Cars and Components, Inc. 11 Mennonite Church Road Spring City, PA 19475 TECH & INFORMATION: 610-948-7303 ORDERS: 1-800-523-3353 OFFICE FAX: 610-948-7342 E-Z INFO FAX 610-792-1234 CAUTION!!! -
More informationTIG WELDING TIPS by Tom Bell
(This is a two-part document, with general tig welding first followed by one aluminum-specific.) TIG WELDING TIPS by Tom Bell 1. The bigger the rod, the easier it is to feed. Use larger diameter rods (3/32
More informationSection 6 Brake Drum Failure Analysis. Brake Drum Wear Conditions. What is Normal Wear? What is Deep or Excessive Wear? WARNING. Deep, Uniform Wear
Section Brake Drum 6 Failure Analysis WARNING To prevent serious eye injury, always wear safe eye protection when you perform vehicle maintenance or service. Figure 6.1 ASBESTOS AND NON-ASBESTOS FIBERS
More informationPolishing Stainless Steel and Aluminum
Polishing Stainless Steel and Aluminum Richard Widman This paper describes the process for restoring stainless steel and aluminum parts. While it is particularly aimed at car hobbyists, the process is
More informationSECTION 4: Cable Ladder Stainless Steel & Aluminium
SECTION 4: Cable Ladder & Aluminium Type 3/50 (NEMA 6A) Type 4/70L Type 5/112 (NEMA 20C) > 4:3 > 4:4 > 4:5 Aluminium Type 4/70A (NEMA 16B) Ladder Splice Plates > 4:7 > 3:18 Page 4:1 Cable Ladder General
More informationDTU Animal Cart Programme
DTU Animal Cart Programme TECHNICAL 21 RELEASE PIPE AND ROLLER DONKEY CART AXLES Development Technology Unit, Department of Engineering, University of Warwick, Coventry, CV4 7AL UK, tel: +44 (0)1203 523523
More informationPortable Grinder. Given a properly adjusted portable grinder, instruction and demonstration of use, each student will be able to:
Portable Grinder I. Competencies Given a properly adjusted portable grinder, instruction and demonstration of use, each student will be able to: A. Identify the major parts of the portable grinder. B.
More informationChapter. Restoration of Damaged Structures
5 Chapter Restoration of Damaged Structures Bringing back a damaged structure to its pre-earthquake state and original strength is called restoration. This is the first step of building rehabilitation.
More informationCHAIN CARE & TROUBLE SHOOTING
Fatigue Failure Bushing Fatigue Stress Corrosion Stress Corrosion and Hydrogen Embrittlement These closely related failures are similar in appearance and nature. They appear as cracks which initiate at
More informationBearing Failure: Causes and Cures
Bearing Failure: Causes and Cures bearing.ppt Page 1 Excessive loads usually cause premature fatigue. Tight fits, brinelling and improper preloading can also bring about early fatigue failure. The solution
More informationManual piston sampler...m 11
SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr
More informationFlash Butt Welding Machines
Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process
More informationFasteners and screw threads
ISO Standards Handbook: Fasteners and screw threads Volume 2: Product standards Contents Part 3 : Product standards 2001, Ed. 5, 1094 p., ISBN 92-67-10345-8 3.1 External drive hexagon head bolts and screws
More informationJames M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
More informationPads for use on Dual Action / Random Orbital Sanders
70515V 5115 5" PSA 5/16 x 24 12,000 70516V 5116 6" PSA 5/16 x 24 10,000 J70515 5215 5" Hook 5/16 x 24 12,000 J70516 5216 6" Hook 5/16 x 24 10,000 Firm, low profile urethane molded pad with a heavy duty
More informationOD 1401 9 PRECISION MEASURING INSTRUMENTS
SUBCOURSE EDITION OD 1401 9 PRECISION MEASURING INSTRUMENTS PRECISION MEASURING INSTRUMENTS SUBCOURSE OD1401 EDITION 9 Unites States Army Combined Arms Support Command Fort Lee, VA 23801-1809 5 CREDIT
More informationA Beginner s Guide to MIG Welding
A Beginner s Guide to MIG Welding MIG Welding Names MIG welding, or MIG, is an acronym for Metal Inert Gas welding. MIG is a commonly used and accepted slang term that was appropriate when the process
More informationInstallation Guide for the TJ LCG PRO Suspension System (Low Center of Gravity) Available 4 or 5
INSTALLATION GUIDE Installation Guide for the TJ LCG PRO Suspension System (Low Center of Gravity) Available 4 or 5 Take every precaution to make this installation a safe procedure. Make safety the number
More information10 deg 4 4.3 4.6 4.9 5.2 5.5 6 6.3 6.7 7.1 7.4 7.7 8 8.3 8.6. 12 deg 4.8 5.2 5.6 6 6.4 6.8 7.2 7.6 8 8.4 8.8 9.2 9.6 10 10.4
max-prop utomatic Feathering Propeller Installation Instructions TR L LSSI 1) INTROUTION: Thank you for having chosen a Max-Prop automatic feathering propeller for your vessel. This instruction booklet
More informationVinyl Brick Mould Field Installation Instructions All Vinyl and Vinyl Clad Windows
Vinyl Brick Mould Field Installation Instructions All Vinyl and Vinyl Clad Windows Viewed from the exterior. IMPORTANT: Please read before you begin installation. TABLE OF CONTENTS AND TOOL / MATERIAL
More informationModel # 940P-V6. Page 1 of 11
Model # 940P-V6 Page 1 of 11 Page 2 of 11 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic coated elements. Ultra Play guarantees all items for one full year to be free of defects in
More informationH EAD TUBE BASICS. Figure 1 - Head tube, front fork and hardware
H EAD TUBE BASICS Figure 1 - Head tube, front fork and hardware This tutorial will cover some of the basics you need to know when pulling apart the steering system of a bicycle for repair or use on one
More informationWaterproof Paper Sheets. Hermes Cloth Sanding Belts
Waterproof Paper Sheets Flexible latex impregnated, anti-slip paper backing with a fully resin-bonded grit. The paper can be used wet or dry as a durable abrasive for hand finishing. Supplied in full sheets
More informationSECTION 6. Glass Storefront Doors:
SECTION 6 Glass Storefront Doors: Table of Contents 3070 Storefront Door System Description & Dimensions 6070 Storefront Door System Description & Dimensions Door Leaf Detail Optional 10 Bottom Rail Detail
More informationCrevice Corrosion on Stainless Steel Propeller Shafts
Crevice Corrosion on Stainless Steel Propeller Shafts A Quick Summary: What is it? How to Prevent it. How to Repair it. Stainless steel propeller shafts and running gear are subject to pitting & crevice
More informationLiftAlloy Chain Slings
CHAIN SLING BASICS Slings Lift-All chain slings meet or exceed all OSHA, ASME B30.9 and NACM standards and regulations. chain slings, available in 80 for 7/32" and 7/8"- /4" and 00 for 9/32"-3/4", are
More informationSelection, Use, and Care of Brushes
Wood Finishing & Refinishing Fact Sheet #2 Selection, Use, and Care of Brushes Dr. Leona K. Hawks Home Furnishings and Housing Specialist 1995 HI 22 Good results in wood refinishing depend to a large extent
More informationSection V Removing Frozen or Broken Fasteners & Taps
154 CHAPTER 6 THREADS & THREADING Section V Removing Frozen or Broken Fasteners & Taps Frozen or Broken Fastener Removal What are the common methods for removing frozen or broken threaded fasteners? Here
More informationDrive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
More informationLightweight, Heavy Duty
Lightweight, Heavy Duty Trench Covers System Reliability The light weight combined with the tremendous strength of Comcore Trench Covers translates into speed, productivity and increased system reliability.
More informationUC-SERIES TIMKEN BALL BEARING HOUSED UNITS
UC-SERIES TIMKEN BALL BEARING HOUSED UNITS 3 TIMKEN BALL BEARING HOUSED UNITS DESIGNED FOR OPTIMIZED PERFORMANCE For more than 110 years, Timken innovations continue to keep the world in motion, including
More informationField Welding Inspection Guide
Field Welding Inspection Guide Assistance in interpretation of any specification or questions concerning field welding issues can be obtained from the Office of Materials Management, Structural Welding
More informationPOLE MOUNT SYSTEM-3 INSTALLATION
1 May 2014 POLE MOUNT SYSTEM-3 INSTALLATION The Pole Mount System-3 is an easy to install and flexible system designed to allow ONE SYSTEMS loudspeaker products to be mounted to pole structures. The only
More informationAssembly and Usage Instructions
Assembly and Usage Instructions A Product 5885 West Van Horn Tavern Road Columbia, MO 65203 www.caldwellshooting.com Instruction #1001667 Limited Warranty Every Caldwell product is warrantied to be free
More informationNOT SEARCHING, BUT FINDING
NOT SEARCHING, BUT FINDING We carefully ensure that our wide and extensive range provides a good assortment so that you feel in good hands, even if you are looking for portable measurement devices to provide
More informationTrouble shooting guide
guide DPR/PSR Leak Insuffi ciently tightened, shallow bite Tighten the nut according to correct number of turns, direct assembly only for maintanance/repair, use of recommended pre-assembly machines Mark
More informationTubing Data. Contents. Tubing Selection. Tubing Handling. Tubing Material. Tubing Outside Diameter Hardness. Tubing Wall Thickness
www.swagelok.com Tubing Data Contents Tubing Selection... 1 Tubing Handling.... 1 Gas Service... 2 Tubing Installation.... 2 Suggested Allowable Working Pressure Tables Carbon Steel Tubing... 3 Stainless
More informationAbrasive Wheel Grinder Safety
Abrasive Wheel Grinder Safety One of the most common pieces of machinery in use in the maintenance shops on campus is the abrasive wheel grinder. These useful machines, used to remove metal from flat and
More informationHow To Make A Spiral Fluted And Wire Wrapped Dagger Handle
Making A Spiral Fluted and Wire Wrapped Dagger Handle By: Steve Culver, MS Part 1 Making A Spiral Fluted and Wire Wrapped Dagger Handle By: Steve Culver, MS After the rough handle material is drilled through
More informationInstallation Instructions
PUSH Installation Instructions A DA C O M PLIA NT shown with optional Bradley 90-75 faucet Front-Mounted Barrier Free Rectangular Bowl Stainless Steel Lav Table of Contents Pre-Installation Information...........2
More informationGMAW Aluminum Plate Annotated Instructor s Guide
GMAW Aluminum Plate Annotated Instructor s Guide Module 29401-10 Module Overview This module covers the basics of aluminum metallurgy. It also explains how to make fillet and V-groove welds on aluminum
More information758 Heavy-duty Ratchet Guy Wire Cutter
INSTRUCTION MANUAL 758 Heavy-duty Ratchet Guy Wire Cutter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product
More informationCLEAR-DIVISIONS CENTERFOLD
CLEAR-DIVISIONS CENTERFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS CENTERFOLD moveable The yellow highlighted areas in
More informationSharpening Instructions. Straight blades Serrated blades Gut hooks Fish hooks and small, pointed objects Small tools
Knife Sharpening Every knife needs sharpening from time to time. With the following instructions, you will be using the safest and most effective method of sharpening your knife. If you are looking for
More informationBRAKE DRUM AND ROTOR SERVICE INFORMATION
SERVICE INFORMATION To achieve maximum drum life and optimum performance, proper brake maintenance and brake balance are essential. Consult your truck or trailer manufacturer s maintenance manual for proper
More informationFIELD ACCEPTANCE OF FIELD WELDING GUIDE
Page 1 of 17 Oklahoma DOT Materials & Testing January 14, 2004 Publication: GFA-FW (Updated to reference current Structural Materials Branch of the ODOT Materials Division URL 07/06/2016) FIELD ACCEPTANCE
More informationMicrio WS1 Replacement Wind Speed Sensor and WC1 Replacement Wind Compass Sensor for Raymarine ST50 and ST60 Wind Instruments. Rev 4.
Micrio WS1 Replacement Wind Speed Sensor and WC1 Replacement Wind Compass Sensor for Raymarine ST50 and ST60 Wind Instruments. Rev 4.1 The Micrio WS1 Wind Speed Sensor and WC1 Compass Sensor are direct
More informationThermo Scientific Rotor Care Guide. Protect your rotor investment
Thermo Scientific Rotor Care Guide Protect your rotor investment Thermo Scientific Rotor Care Guide Thermo Scientific rotors meet the high standards we set for all of our laboratory products. The precision-engineered
More informationTube Type Oil Skimmer Comparison
Process Overview- Tube Type Oil Skimmers Oil flows down the face of the skimmer and into a sludge pan that is plumbed to a barrel. Model BG01 & BG34 or 6V Oil Skimmer 1.0 or 3/4 Diameter Collector Tube
More informationVC 104+ Rigid Grade / Rigid Grade Imagine VC 104 Rigid Grade Commercial Customised
Page 1 of 6 instructions VC 104+ Rigid Grade / VC 104+ Rigid Grade Imagine / (for the rest of this document referred to as VC 104) can be applied to new and used trucks and trailers with painted rigid
More informationFlat Bottom Long Ram Hydraulic Jack
Flat Bottom Long Ram Hydraulic Jack 3 Ton 8 Ton 36468 36469 ASSEMBLY & OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS
More informationLarsLap model C for cutting, milling grinding and lapping seats and flanges on globe, safety and control valves
LarsLap model C for cutting, milling grinding and lapping seats and flanges on globe, safety and control valves As a rule, control and reduction valves of the globe type have an integrated plug that narrowly
More informationDo-It-Yourself- Hydraulic Press Make Your Own, by Marshel Rossow
Do-It-Yourself- Hydraulic Press Make Your Own, by Marshel Rossow This press can be built from readily available metal. Materials and dimensions need not be exactly what is shown here. Much of the material
More informationTECHNICAL SPECIFICATION SERIES 8000 PRECAST CONCRETE
TECHNICAL SPECIFICATION SERIES 8000 PRECAST CONCRETE TECHNICAL SPECIFICATION PART 8000 - PRECAST CONCRETE TABLE OF CONTENTS Item Number Page 8100 PRECAST CONCRETE CONSTRUCTION - GENERAL 8-3 8101 General
More informationNEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE
B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY
More informationCOASTAL BEND COLLEGE WELDING SYLLABUS (Revise 11/13) Intermediate Shielded Metal Arc Welding (SMAW)
COASTAL BEND COLLEGE WELDING SYLLABUS (Revise 11/13) WLDG 1457: Intermediate Shielded Metal Arc Welding (SMAW) Semester Hours: 4 Textbook: Course Description: Course Learning Outcomes: Supplementary Materials:
More informationFOR INFORMATION CALL 1-800-689-FLEX(3539) or VISIT OUR WEBSITE AT FLEXOVITABRASIVES.COM. 1-800-689-FLEX (3539) flexovitabrasives.
Corporate Offices, Manufacturing Facility, Eastern U.S.A. Sales & Distribution Center 305 Eden-Evans Center Rd. Angola, New York 4006 United States of America Tel: (76) 952-9290 (76) 549-50 Fax: (76) 549-4078
More informationPictorial Surface Preparation Standards For Painting Steel Surfaces
Pictorial Surface Preparation Standards For Painting Steel Surfaces Printed by Manchester Contents Contents 3 Foreword 4 Scope 5 Rust grades 6 Preparation grades. Scraping and wire-brushing 6 Preparation
More informationCoated Abrasives. Hand Sanding Sheets
Hand Sanding Sheets 21 Hand Sanding Sheets Paper Sheets PB013 FLINT LIGHT PAPER SHEETS PB013 (flint light paper) Abrasive: Flint Backing Material: Light paper Economy product For use on paint, soft wood,
More informationMachine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
More informationResharpening Companion
Resharpening Companion 10950 Correct Angles, Pictures, and Step-By-Step Instructions The Resharpening Companion is meant to be a guide and quick reference to help you resharpen. It is not meant to replace
More informationSTEADYfast Stabilizer Installation Notes Fifth Wheel and Travel Trailers 11/23/13
STEADYfast Stabilizer Installation Notes Fifth Wheel and Travel Trailers 11/23/13 (See Supplemental Instructions for trailers with heavy duty round footplates and/or Power Leveling Systems) PHONE SUPPORT
More informationRIGGING HARDWARE ASME B30.26. Addresses detachable lifting hardware for lifting purposes
RIGGING HARDWARE ASME B30.26 Addresses detachable lifting hardware for lifting purposes Adjustable Hardware (Turnbuckles, Eye nuts, Swivel Hoist Rings and Eyebolts Compression Hardware (Wire Rope Clips
More informationCOLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES
COLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES I. OBJECTIVE To provide an overview and basic knowledge of the University of Wyoming, College of Engineering, equipment, tools,
More informationSERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
More informationVdS 2100-09en. VdS Guidelines for water extinguishing systems. Non-return valves. Requirements and test methods. VdS 2100-09en : 2011-05 (01)
VdS Guidelines for water extinguishing systems VdS 2100-09en Requirements and test methods VdS 2100-09en : 2011-05 (01) Publishing house: VdS Schadenverhütung GmbH Amsterdamer Str. 172-174 50735 Köln,
More informationIsola Steel Gutters Strength and design for extreme climate!
Isola Steel Gutters Strength and design for extreme climate! Dry and healthy buildings Isola Steel Gutters Steeled against wind and weath The four seasons Wide temperature variations and highly variable
More informationPIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta
PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved
More information2. This is a close up of a typical area where the rocker is rusted out leaving holes under where the rocker moulding would be..
ROCKER PANELS 55,56,57 CHEVY REPLACEMENT Do not throw away any pieces when you first remove them. There are many supports that are not reproduced and will need to be used again. When disassembling try
More informationSlide the new steering column shaft through the steering column from the driver compartment.
Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.
More information3/4 PIPE CLAMP WITH STAND
3/4 PIPE CLAMP WITH STAND Model 94053 ASSEMBLY AND OPERATING INSTRUCTIONS (3/4 DIAMETER PIPE NOT INCLUDED.) 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com
More informationCHARISMA SHOWER/TUB DOOR INSTALLATION INSTRUCTIONS
CHARISMA SHOWER/TUB DOOR INSTALLATION INSTRUCTIONS IMPORTANT DreamLine reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings,
More informationMEASURING WHEEL ALIGNMENT
MEASURING WHEEL ALIGNMENT 2003-04 WHEEL ALIGNMENT Specifications & Procedures - Hummer - H2 Steering and vibration complaints are not always the result of improper alignment. One possible cause is wheel
More informationSTORAGE SYSTEMS PUSH BACK RACK SYSTEMS. Innovative Solutions for Storage and Material Handling Systems
STORAGE SYSTEMS PUSH BACK RACK SYSTEMS Innovative Solutions for Storage and Material Handling Systems Konstant.com PUSH BACK OVERVIEW Konstant patented Push Pack rack system provides selectivity in the
More informationThe Bonelle Tool and Cutter Grinder
The Bonelle Tool and Cutter Grinder The grinder was constructed about 1987 and exhibited at the 89th Model Engineering exhibition where it was awarded a bronze medal (see ME Vol164 No 3868 page 273). Subsequently
More information413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX
413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:
More informationLEADER IN CUTTING TECHNOLOGY
LEADER IN CUTTING TECHNOLOGY FOR OVER 2 YEARS REASONS WHY TRONEX IS THE BEST IN THE WORLD 1 2 SUPERIOR CUTTING PERFORMANCE Cut hundreds of thousands of times before dulling. Cut hundreds of thousands of
More information10 TON HYDRAULIC PRESS
10 TON HYDRAULIC PRESS Model Nos. CSA10F and CSA10B OPERATING & MAINTENANCE INSTRUCTIONS 0200 SPARE PARTS and SERVICING Please contact your nearest dealer, or CLARKE International, on one of the following
More informationINSTALLATION INSTRUCTIONS for Premium Pocket Windows (JII022) IMPoRtaNt INFoRMatIoN & glossary. safety & HaNdlINg
Thank you for selecting JeLd-weN products. Attached are JeLd-weN s recommended installation instructions for pocket (replacement) double-hung, casement, awning, picture or transom windows, designed to
More informationMASONRY RESTORATION Lime Putty Mortar Repointing Guide
1.0 Preparation for Lime Putty Mortar Pointing 1.1 Tools & Approach A. Grinding - When used in a controlled way, angle grinders with diamond-impregnated metal blades with a maximum 1/8-inch-thickness and
More informationMidwest Industrial Tanks
FOR AGRICULTURE AND INDUSTRY Midwest Industrial Tanks Fuel & Oil Storage Solutions Midwest Industrial Tanks Is Your Source For All Of Your Fuel Storage And Fuel Transportation Needs. Our Satisfied Customers
More informationReproduced with the permission of the American Welding Society (AWS), Miami, Florida - 09/15/2011. 7. Stud Welding
7. Stud Welding 7.1 Scope Section 7 contains general requirements for welding steel studs to steel (see 7.2.7 and 1.2.2 for approved steels). In addition, it stipulates specific requirements for the following:
More information5.2. Overview. The better method to install solderless compression connectors on power cable
5.2 Overview The better method to install solderless compression connectors on power cable The Thomas & Betts method of installing compression connectors on power cables is designed to provide a high degree
More informationINSTRUCTION FOR ASSEMBLY. 150x180 v Traditional sauna cabin
INSTRUCTION FOR ASSEMBLY 150x180 v Traditional sauna cabin 1. SAUNA PLAN 1800 LIGHT UNDER THE BENCH VENTILATION OUTLET UPPER BENCH 600 1500 LOWER BENCH 400 700 1656 956 HEATER 366 381 690 815 Light switch
More informationPropeller Equipment Sale. For Questions please contact Dan Cork Propdoc@aol.com 918-636-3567
Propeller Equipment Sale For Questions please contact Dan Cork Propdoc@aol.com 918-636-3567 Propeller Equipment Sale The equipment for sale is used in the repair and overhaul of aircraft propellers. Propeller
More informationPARTS FOR OTHER EMBROIDERY MACHINES
PARTS FOR OTHER EMBROIDERY MACHINES PARTS FOR SINGER 114K & 114W, TREASURE and other "FREE HAND" CHAINSTITCH EMBROIDERY MACHINES - 8056-2 Nipple #2-8056-3 Nipple #3-8056-4 Nipple #4-8056-5 Nipple #5-8056-6
More information