PRODUCT SPECIFICATION SHEET:
|
|
- Ada Mason
- 7 years ago
- Views:
Transcription
1 PRODUCT SPECIFICATION SHEET: Product Brand Name: C-BOND Matt Product Description: 8 µm single-sided, architectural, enhanced coil anodized aluminum skin i Enhanced anodized surface properties : front side Anodic layer thickness: o Measured following Eddy Current method (ISO 2360) o guaranteed value of minimum 7-8 µm, at any point on the surface Sealing of the anodic layer o Weight loss test following EN ISO 3210:2010 (method 1) o Results < 20 mg/dm² Continuity of the anodic layer, o Continuity test following EN ISO 2085:2010 o Results : no points per cm² Visual surface appearance: o Uniform and metallic appearance o No defects visible at an inspection distance of 3 m o Crazing due to thermal gluing, not visible at 3 m distance Gloss : o o Measured at 60 // following EN ISO 7668:2010 expressed in Gloss Units (GU) Gloss tolerances can be agreed depending on the used substrate Color: see colour selector for available colours
2 The surface is resistant to 1 : Elevated temperatures: o This product can be safely exposed to temperatures up to 180 C. o If this product is intended to come into contact with process temperatures above 180 C, please contact COIL NV/SA for advice. filiform corrosion & weathering Fading due to light & UV influences Folding and bending Abrasion & impact Chalking Finger printing Classically anodized back side: Anodic layer thickness: indicative value of 3-5 µm, not guaranteed Improved adhesive properties for gluing to a PE core Important remark: the back side is not intended to be the exposed, visible side. Aluminum substrate properties: Mechanical properties following DIN EN Dimensional tolerances following DIN EN Alloy EN-AW 5005, but other alloys possible on request Temper: typically H14 or H24 but other tempers available on request Anodizing Quality 1 Detailed test results are available on request.
3 Warranties: Standard Warranty: o Warranty period: 10 years o Warranted properties: Anodic layer thickness Sealing quality of the anodic layer Extended Warranty: On request it is possible to extend the standard warranty period and/or other properties can be included in the warranty. If such an extended warranty is requested, the building project specifications have to be submitted to COIL NV/SA for evaluation. For more information, please contact COIL NV/SA. Application(s): This product is intended to be used as front skin in aluminium composite panels for in- and outdoor architectural applications. Availability: Coil Width (mm) Gauge (mm) Dimensional tolerances following DIN EN Protective film possible. Recommended type: rubber based, µm, UV resistant Other dimensions available on request.
4 Crazing: No influence on corrosion resistance (checked in lab and practice) Crazing very sensitive to handling after continuous treatment, like levelling, CTL, slitting => know-how to handle anodised material. Stronger and inhomogeneous crazing Inform the customer Know-how on further processing limited visual impact and no detrimental impact on the final appearance Typical phenomen on pre-anodized aluminium Crazing = micro-cracking of the anodic layer Perpendicular to the rolling direction Homogeneous not visible at 3m distnance
5 i Definitions: Single-sided anodizing: only the front side is intended to be the exposed, visible side. Only this side is guaranteed. Clear anodizing: the anodic layer is transparent, not colored. The observed surface color is that of the aluminum substrate. Also known as natural anodizing. Architectural anodizing: anodizing process specifically designed for architectural applications. Enhanced anodizing: the classical anodizing process has been modified in order to meet the above mentioned properties. Coil anodizing: anodizing of aluminum coils in a continuous treatment process
AKRAPLAST Sistemi S.p.A. - I - 20026 Novate Milanese (Mi) - via Cascina del Sole, 70 Tel: (+39) 02 35 13 91 1 - Fax: (+39) 02 35 13 91 50 - E-mail:
Choose between alternatives marked by SPECIFICATION TEXT Wall; Northlight; realised with modular system type AKRAPAN by Akraplast Sistemi, composed of: 1) UV protected multi-wall polycarbonate panels with
More informationSPECIFICATION Aluminum Module Frames. Allowed anodization before fabrication for clear frames.
SPECIFICATION Allowed anodization before fabrication for clear frames. Page 2 of 9 1. SCOPE 1.1. This document provides general requirements for aluminum frames used in the assembly of photovoltaic modules.
More informationGuideline Laser Series
Guideline Laser Series Highly visible alignment laser for visually demanding surfaces Red / Green long visible lines Equal brightness across length of the line Uniform Line (no fading at ends of the line)
More informationSECTION 08 5656 GUARDA SECURITY WINDOW SCREENS
Page 1 of 5 SECTION 08 5656 GUARDA SECURITY WINDOW SCREENS Guarda Security Window Screens in this specification are appropriate for use in windows, storefronts, curtain walls, vents, and any other applications
More informationSliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
More informationCoated Aluminium Sheets and Coils for Roller Shutters and other Building Applications
Coated Aluminium Sheets and Coils for Roller Shutters and other Building Applications Products Quality Certification According to EN / ECCA and AA standards. Coated Aluminium Sheets and Coils for Roller
More informationA. Work on this project shall consist of, but is not limited to, the following:
PART 1 - GENERAL CLEANING AND RESTORATION OF SECTION 05900-1 1.1 SUMMARY A. Work on this project shall consist of, but is not limited to, the following: 1. Clean and treat all exposed anodized architectural
More informationMetal Wall Panels. Colorweld 300 Architectural Finishes
Metal Wall Panels Colorweld 300 Architectural Finishes Metal Wall standard architectural finishes These products are protected and colored with high-performance Colorweld 300 coatings ensuring precise
More informationProfiles for floors of same height Cerfix Projoint
PROFILPAS S.P.A. VIA EINSTEIN, 38 35010 CADONEGHE (PADOVA) ITALY TEL. +39 (0)49 8878411 +39 (0)49 8878412 FAX. +39 (0)49-706692 EMAIL: INFO@PROFILPAS.COM s for floors of same height Cerfix Projoint Application
More informationPre-treatment of Aluminium Surfaces Architect Information Surface Finishes. Status 09.2012
Pre-treatment of Aluminium Surfaces Architect Information Surface Finishes Status 09.2012 Content 1 Schüco Overview System Finish 2 Schüco Overview Pre-treatment Choices 3 Importance of Pre-treatment 4
More informationSECTION 08 41 1 ALUMINUM FRAMED ENTRANCES and STOREFRONTS. System 402 Flush-Glazed Screw Spline Storefront
PART 1 GENERAL 1.01 Work Included SECTION 08 41 1 ALUMINUM FRAMED ENTRANCES and STOREFRONTS System 402 Flush-Glazed Screw Spline Storefront A. Furnish and install aluminum architectural storefront system
More informationSika Membran System For Sealing and Waterproofing Construction Gaps in Building Façades
Construction Sika For Sealing and Waterproofing Construction Gaps in Building Façades Waterproof and Airtight Flexible Seal Controlled Vapour Diffusion Bonds to any Building Substrate Prevents Interstitial
More informationGENERAL TRADING TERMS (GTT) RMC by EUROSURFACES
GENERAL TRADING TERMS (GTT) RMC by EUROSURFACES PART I GENERAL COMMERCIAL CONDITIONS FOR THE SALE OF AGGLOMERATED STONE RMC by EUROSURFACES Manufacturer: Product Brand: EUROSURFACES PORTUGAL S.A. RMC Rua
More informationCERTIFICATE NAME OF PRODUCT MANUFACTURER PRODUCT DESCRIPTION CERTIFICATION PROCEDURE. No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011
CERTIFICATE NAME OF PRODUCT No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011 H-CONTROL REFLEX+ reflective insulating vapour control layer for roof and wall applications MANUFACTURER ACTIS
More informationSECTION 07720 PREFORMED METAL STANDING SEAM ROOFING
SECTION 07720 PREFORMED METAL STANDING SEAM ROOFING PART ONE GENERAL DESCRIPTION This section includes pre-formed standing seam metal roofing and related flashings, closures, trim and accessories including,
More informationUNLIMITED VARIETY OF CREATIVE SHEET MATERIAL.
UNLIMITED VARIETY OF CREATIVE SHEET MATERIAL. MADE IN SWITZERLAND Airex AG was founded in 1956 and pioneers with its innovations in the field of foamed plastic materials. Apart from manufacturing technical
More informationApproved. Property Test/Standard Description. matt (0-35) Flash point ISO 3679 Method 1 27 C calculated IED (2010/75/EU) (calculated)
Approved 402;2521 1 2521 zinc epoxy ^(ValidationDate). 1 Product description This is a two component polyamide cured zinc rich epoxy coating. It is a very high zinc dust containing product. It conforms
More informationALLOY 6022 SHEET. Higher Strength with Improved Formability SUPPLYING THE WORLD S BEST
SUPPLYING THE WORLD S BEST DESCRIPTION 6022 is a heat treatable low copper, Al-Si-Mg sheet alloy developed by Alcoa to satisfy the needs of automotive manufacturers for closure panels, such as a hood,
More informationHexWeb CR III Corrosion Resistant Specification Grade Aluminum Honeycomb
Corrosion Resistant Specification Grade Aluminum Honeycomb Description 5052 and 5056 expanded aerospace grade aluminum honeycomb materials are available in a wide selection of cell sizes and foil gauges.
More informationProfiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa
Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard
More informationThe BASA Guide to the ISO 11600 Classification of Sealants for Building Construction
The BASA Guide to the ISO 11600 Classification of Sealants for Building Construction SEALANTS IN BUILDING AND CONSTRUCTION Glazing Sealants (G) Construction Sealants (F) Class 25 Class 25LM Class 25 Class
More informationAluminium foil properties: Applications of aluminium foils and thin gauge strips in thickness below 0,50 mm:
1 ALUMINIUM FOILS AND THIN GAUGE STRIPS The year 2010 has been celebrated as the 100th anniversary of aluminium foil. Ever since the beginning in 1910 the usage of foil has been growing and products developed
More informationVdS 2100-09en. VdS Guidelines for water extinguishing systems. Non-return valves. Requirements and test methods. VdS 2100-09en : 2011-05 (01)
VdS Guidelines for water extinguishing systems VdS 2100-09en Requirements and test methods VdS 2100-09en : 2011-05 (01) Publishing house: VdS Schadenverhütung GmbH Amsterdamer Str. 172-174 50735 Köln,
More informationpro-part Ficha técnica Recommended use Materials Substrates
Ficha técnica pro-part Decorative profile for ceramic wall tiles. It is an alternative to the traditional ceramic frieze. Suitable for trimming corners and transitions between ceramic tiles. pro-part is
More informationBETONYP building boards. The modern way of living.
BETONYP building boards The modern way of living. Tough for 30 years. Healthy, debarked pine wood and cement: the raw materials used to produce one of our most successful products for more than three decades.
More informationSECTION 07 61 13 STANDING SEAM METAL ROOFING
SECTION 07 61 13 STANDING SEAM METAL ROOFING PART 1 GENERAL 1.01 SCOPE OF WORK A. The Work shall include all labor, materials, equipment and supervision required to complete the work of the above referenced
More informationJIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes
JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes 1. Scope This Japanese Industrial Standard specifies the electric resistance welded carbon steel tubes, hereinafter
More informationZero peel strength of acrylic pressure sensitive adhesive is at about 45 C (-50 F).
PRODUCT BULLETIN Aluminum Polyimide Acrylic (3M 966) PSA First Surface Aluminum Coated Polyimide Tape with Acrylic 3M 966 Adhesive TAPES Sheldahl Brand Materials first surface aluminized polyimide tape
More informationTECHNICAL BULLETIN. Oil Canning in Metal Roof and Metal Wall Systems. What Is Oil Canning?
TECHNICAL BULLETIN Oil Canning in Metal Roof and Metal Wall Systems What Is Oil Canning? Oil Canning can be defined as visible waviness in the flat areas of metal roofing and metal wall panels. In technical
More informationTIGER Drylac U.S.A., Inc. 3855 Swenson Avenue St Charles, IL T 800 243 8148 F 877 926 8148 office.us@tiger-coatings.us www.tiger-coatings.
Product Data Sheet SERIES 69 - DRYZINC ZINC-RICH PRIMER (69/90500) Epoxy zinc-rich powder coating primer. Part of a two-coat TIGER Shield system. Designed to impart superior corrosion protection to steel
More informationVC 104+ Rigid Grade / Rigid Grade Imagine VC 104 Rigid Grade Commercial Customised
Page 1 of 6 instructions VC 104+ Rigid Grade / VC 104+ Rigid Grade Imagine / (for the rest of this document referred to as VC 104) can be applied to new and used trucks and trailers with painted rigid
More informationPolyimide labels for Printed Circuit Boards
Polyimide labels for Printed Circuit Boards The right match for any PCB labelling application Labels on Printed Circuit Boards Matching product performance with application needs Printed Circuit Boards
More informationMaster Panel 1000 R5 Roof
Master Panel 1000 R5 Roof Product Description The important feature of the roof elements are the easy installation procedure. The element fix exactly and pushed together without much force. Roof coverage
More informationCable Trays Technical Instructions & Specifications
Cable Trays Technical Instructions & Specifications Products Catalogue Objective and Structure The company s main objective is the supply of quality products, with respect to: practical design increased
More informationConstruction. SikaProof A-08 Edge, A-12 Edge. Fully bonded FPO sheet membrane in L-shape for the SikaProof A waterproofing system. Product Description
Product Data Sheet Edition 15/10/2014 Identification no: 02 07 04 10 300 0 000002 SikaProof A Edge SikaProof A-08 Edge, A-12 Edge Fully bonded FPO sheet membrane in L-shape for the SikaProof A waterproofing
More informationsynthetic waterproofing systems
GreeN roofing Waterproofing systems with SINTOFOIL TpO/Fpa membranes synthetic waterproofing systems Recently, green roofing systems have been attracting increasing interest because of the significant
More informationSECTION 07410 METAL ROOF & WALL PANELS
This document specifies Metal Roofing Systems prefinished factory formed metal roofing marketed as MRS System 2500 steel and aluminum roofing systems and includes MRS flashing and Trim. MRS finish is a
More informationDiamond Grade Conspicuity Markings 983-71 For School Bus Safety Markings
Diamond Grade Conspicuity Markings 98-71 For School Bus Safety Markings Product Bulletin 98-71 March 2006 Replaces PB 981-71 dated September 1999 Description M Diamond Grade Conspicuity Markings 98-71
More information3 Single-Coated Foam Tapes
3 Single-Coated Foam Tapes Technical Data May, 2008 Product Description 3M Single-Coated Foam Tapes will adhere to a variety of substrates, including latex-painted wood, lacquered wood, enameled steel,
More informationLaminating Films - Heat Activated
Laminating Films - Heat Activated Print Guard UV This film features superb ultraviolet protection at low activation temperature (185º F - 195º F) and an aggressive solvent acrylic adhesive. Linerless Print
More informationDenco Sales Aspire Catalog
Denco Sales Aspire Catalog This catalog is a product reference guide. For more detailed information, inventory availability, pricing, data sheets, printing profiles and more click here to go to the Denco
More informationTHERMAL CHARACTERISTICS Nominal operating cell temperature(noct) [ C] 48,2±2 48 Temperature coefficient P MPP [%K] -0,41-0,47 Temperature coefficient I SC [%K] 0,05 0,04 Temperature coefficient U OC [%K]
More information40 years of quality & service. SINTEPLAST, S.A. de C.V. TARPAULIN
SINTEPLAST, S.A. de C.V. TARPAULIN Econoplast Tarpaulin 9 x 6 1000 D. Specially designed for outdoor uses. Its excellent physical and mechanical proprieties make it one of the most versatile materials.
More informationPAAM COMMERCIAL PRIVATE LIMITED
METAL PACKAGING We at Paam Group have been providing vast range of packaging products to our customers based on their preferences, needs and specifications. We provide all the materials required in metal
More informationAthena is the name given to our assortment of electronic tapes. products of the very highest quality. These tapes both conduct and
Electric Athena. Athena is the name given to our assortment of electronic tapes products of the very highest quality. These tapes both conduct and insulate against electricity, in addition to warmth and
More informationRPV - RP - RA air handling units
APPLICATIONS Heating, ventilation, cooling >> FACTORIES >> WAREHOUSES >> HALLS >> DISTRIBUTION CENTRES >> COMMERCIAL PREMISES >> PLACES OF WORSHIP RPV - RP - RA air handling units www.reznor.eu RPV - RP
More informationTest Report No. C829QPEN
Institut für Solartechnik Hochschule für Technik Rapperswil Oberseestrasse 10, CH 8640 Rapperswil Tel +41 55 222 48 21, Fax +41 55 222 48 44 www.solarenergy.ch Ordered by: Westech Components Wuxi Co.,
More informationINDUSTRIAL ROOFING CASE STUDY: The Advantages of Aluminized Stainless Steel. Roof Installed:
INDUSTRIAL ROOFING CASE STUDY: Aluminized Type 409 and Aluminized Type 439 Roofing Panels were Installed in an Industrial Building Site in Place of Painted GALVALUME. Aluminized Type 2 Carbon Steel was
More informationSECTION 07410 PREFORMED METAL STANDING SEAM ROOFING PART 1 - GENERAL 1.1 DESCRIPTION OF WORK
SECTION 07410 PREFORMED METAL STANDING SEAM ROOFING PART 1 - GENERAL 1.1 DESCRIPTION OF WORK A. This section covers the pre-finished, pre-fabricated Architectural standing seam roof system. All metal trim,
More informationDivision 9. SignaFlor Pad and Pour Flooring System
Division 9 SignaFlor Pad and Pour Flooring System SPECIFICATIONS Page 1. General... 2 1.1 Description 2 1.2 Quality Assurance 2 1.3 Submittals 2 1.4 Delivery and Storage 3 1.5 Warranty 3 1.6 Working Conditions
More informationValve Steel. Valve Steel
Valve Steel Valve Steel BÖHLER-UDDEHOLM Precision Strip AB is one of the world s leading manufacturers of high quality strip steel. More than a century s experience of cold rolling has given us a unique
More informationSL30-ISO PROFILE SYSTEM
AESTHETICS AND sustainability SL30-ISO PROFILE SYSTEM TECHNICAL DOCuMENTATION WWW.MHB.NL SL30-ISO PROFILE SYSTEM 1. SL30-ISO and SL30-ISO-PLUS Sustainability is getting worldwide more and more the attention
More informationCLEAR-DIVISIONS CENTERFOLD
CLEAR-DIVISIONS CENTERFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS CENTERFOLD moveable The yellow highlighted areas in
More informationThermal Paper Construction
Thermal Paper Construction Thermal Printing Technology provides for instant printing on command. No warm-up time is required for the first page. Laser printers can take 20 seconds or more to start printing
More informationBuilding Owners Guide to a Duro-Last System!
Building Owners Guide to a Duro-Last System Table of Contents Section 1: Introduction to Duro-Last Roofing Systems Section 2: Benefits of a Duro-Last Roofing System Section 3: Comparing a Duro-Last Roof
More informationPROPOSED SPECIFICATION FOR ALUCOBOND PLUS Aluminium Composite Panel Cladding System Fixed Watertight Cassette Panel System - 4mm thick
1. SCOPE OF WORK The scope of work includes the design, supply fabrication and installation of Alucobond PLUS aluminium composite panel cladding, complete with all necessary sub-structures, anchors, hardware
More informationTemperature C 10 15 23 40. Cure time to reach hours - - - - LSS > 1MPa minutes 20 12 8 2
Advanced Materials Araldite 2021 Structural Adhesives TECHNICAL DATA SHEET Araldite 2021 Two component toughened methacrylate adhesive system Key properties Rapid curing High peel strength Multi purpose
More informationWW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors
WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxX_V12 Nov.- 2011
More informationFACADE DESIGN & EXECUTION
Slides are available for public use PROVIDED credit to authors/organisation (M. Berckmoes & P. Lomba / VK Architects & Engineers) is clearly indicated. FACADE DESIGN & EXECUTION I N F O S T E EL - P R
More informationCrystal Clear Sealant
Crystal Clear Sealant Technical Data February, 2012 Product Description 3M Crystal Clear Sealant is a one component thermoplastic elastomer which forms permanent elastic bonds when used in surface sealing
More informationPeel & Seal Self-Stick Roofing Solutions
Peel & Seal Self-Stick Roofing Solutions Ideal for Low Slope Applications Waterproof and Weatherproof Energy Efficient Tough and Durable Versatile, Effective Sealing Around Protrusions Perfect for Vents,
More informationCLEAR-DIVISIONS VARIOFOLD
CLEAR-DIVISIONS VARIOFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS VARIOFOLD moveable The yellow highlighted areas in the
More informationSCENIC VIEW SV 10 SECTION 08 87 13 SOLAR CONTROL FILMS
PART 1 GENERAL SCENIC VIEW SV 10 SECTION 08 87 13 SOLAR CONTROL FILMS 1.1 SUMMARY A. Optically clear dual reflective, neutral sputtered and aluminum metallized polyester film for solar control. 1.2 RELATED
More informationPhosphoric Acid Anodized Aluminum Honeycomb
Phosphoric Acid Anodized Aluminum Honeycomb Description 02 and 06 expanded aerospace grade aluminum honeycomb materials are available in a wide selection of cell sizes and foil gauges. The HexWeb CR-PAA
More informationNORSOK STANDARD M-501 Edition 6 (2012)
Date: 2015-02-17 NORSOK STANDARD M-501 Edition 6 (2012) Surface preparation and protective coating Frequently asked questions INTRODUCTION NORSOK standard M501 Edition 6 was issued in 2012. The standard
More informationDIVISION 23 HEATING, COOLING, AIR CONDITIONING AND VENTILATION
SECTION 230713- ALUMAGUARD ENGINEER SPECIFICATION DIVISION 23 HEATING, COOLING, AIR CONDITIONING AND VENTILATION PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract,
More information05, The third building which will be occupying 6,000 sq meters will be finished built soon, totaling to more than 16,000 sq meters..
Shenzhen Runtianzhi Image Technology Co., Ltd is located in Guanlan Hi-tech Industry Park, Baoan District.. It occupies a lot area of 10,250 square meters for the first two building project which was finished
More information50W EdiStar. Approved By Customer. Designer Checker Approval. Ultra High Power LED
Ultra High Power LED 50W EdiStar EdiStar Emitter Approved By Customer Designer Checker Approval Date:2006/12/04 Version:Preliminary V0.1 4F, No. 800, Chung-Cheng Rd, Chung-Ho, Taipei 235, Taiwan Tel: 886-2-8227-6996
More informationQuality assurance of flex circuits in the SCT barrel hybrid production
Quality assurance of flex circuits in the SCT barrel hybrid production ATLAS Project Document No. Institute Document No. Created: dd/mm/yy Modified: dd/mm/yy Page: 1 of 11 DRAFT Quality assurance of flex
More informationArchitectural Products. Colourful buildings. In pre-coated aluminium
Architectural Products Colourful buildings In pre-coated aluminium Coil coating or pre-painting is the process where large coils of a variety of metals are coated in a continuous, highly automated process,
More informationCriteria Sheet for: Plastic Screw Caps
Page 1 of Criteria Sheet for: Content: 1. Preliminary note 3 2. Specification Criteria of: 4 2.1. Introduction 4 2.2. Geometrical and dimensional accuracy 5 2.2.1. Main dimensions D, d, Di, H, 5 2.2.2.
More information82 CONDUCTIVE TAPES SHEETS
82 CONDUCTIVE TAPESSHEETS CONDUCTIVE FABRIC Conductive fabric tape Conductive fabric P83 CONDUCTIVE FABRIC TAPE METAL FOIL P84 CONDUCTIVE FABRIC TAPE Low-resistivity type using embossed metal foil and
More informationGUIDELINE SPECIFICATIONS
GUIDELINE SPECIFICATIONS GORDON SOFFIT-SHIELD - An Exterior Metal Soffit System DIVISION 05 5800 or DIVISION 07 7700 Note To Specifier: SOFFIT-SHIELD should be installed by tradesmen that are experienced
More informationDouble Coated Urethane Foam Tapes
3 Double Coated Urethane Foam Tapes 4004 4008 4016 4026 4032 4052 4056 4085 Technical Data April, 2009 Product Description 3M Double Coated Urethane Foam Tapes are conformable foams that offer high shear
More informationENGINEERING SPECIFICATION PULTRUDED DYNAFORM FIBERGLASS STRUCTURAL SHAPES. July 1, 2008 Revision 2
ENGINEERING SPECIFICATION PULTRUDED DYNAFORM FIBERGLASS STRUCTURAL SHAPES 1 PART 1 - GENERAL 1.0 GENERAL 1.1 REFERENCES: SECTION 06610 FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS PULTRUDED FIBERGLASS
More informationHarsh Environment Connector Material Selection Guide
Harsh Environment Connector Material Selection Guide Introduction To ensure robust and reliable system performance, harsh environment fiber optic (HEFO) connectors must meet certain requirements. To meet
More informationHexavalent Chrome Removal in Aircraft Painting Schemes
Technical Workshop C3P & NASA 2007 Escola Superior de Tecnologia do Mar Peniche, Portugal Hexavalent Chrome Removal in Aircraft Painting Schemes Joana Vide Pereira - C3P November 9, 2007 Scope Aeronautical
More informationENVIRONMENTAL EFFECTS ON COATINGS
ENVIRONMENTAL EFFECTS ON COATINGS Surfaces exposed to the environment, may be damaged by elements such as water, snow, ice, heat, dirt, smog, humidity, brake dust, grime, salts, chemical attack, and acid
More informationThe Anatomy of a Label
The Anatomy of a Label Three key elements make up a label: face stock, release liner, and adhesive. Face Stock: Face stock is the material of the label that carries the imprint. The print can be applied
More informationENGINEERING SPECIFICATION FIBERGRATE MOLDED GRATING. January 24, 2014 06610-1
ENGINEERING SPECIFICATION FIBERGRATE MOLDED GRATING January 24, 2014 06610-1 SECTION 06610 FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS MOLDED GRATING PART 1 - GENERAL 1.1 SCOPE OF WORK A. The CONTRACTOR
More informationINSTRUCTIONS FOR COORDINATION SECTION 06651 SOLID SURFACE FABRICATIONS
INSTRUCTIONS FOR COORDINATION SECTION 06651 SOLID SURFACE FABRICATIONS 1. Paragraph 1.02 Provide solid surface countertops at sinks locations. Provide solid surface window sills at drywall framing walls.
More informationSECTION 07 42 13 METAL WALL PANELS
Mitsubishi Plastics Composites America, Inc. 401 Volvo Parkway Chesapeake, VA 23320 Phone: (800) 422-7270 Fax: (757) 436-1896 E-mail: info@alpolic.com www.alpolic-northamerica.com This MANU-SPEC utilizes
More informationPower up with brilliant solutions Complete solutions for photovoltaic modules. Photovoltaic
Power up with brilliant solutions Complete solutions for photovoltaic modules Photovoltaic Power up with our labeling solutions Solar panels work hard. Positioned to capture sunlight and transform it into
More informationALPOLIC /fr LT. Technical Manual
ALPOLIC /fr LT Technical Manual Mitsubishi Chemical Functional Products, Inc. URL http://www.alpolic.com MARCH 2005 ALPOLIC /fr LT Technical Manual Contents Section 1 Outline 1. Material composition 2
More informationEDD-401. Stationary Louver Dual Drainable Blade. Application and Design. Standard Construction
Application and Design is a weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates a drainable head member and stationary horizontal blades to
More informationA. Double lock standing seam, single element, metal roof panels.
Specifiers: Click on the icon in the WORD toolbar to reveal detailed instructions SECTION 07 41 13 METAL ROOF PANELS Morin Metal Panels Double Lock Standing Seam Metal Roof Panels PART 1 - GENERAL 1.1
More informationNEW ELECTRICAL SUBSTATION Building 300 SECTION 07 53 23 ETHYLENE-PROPYLENE-DIENE-MONOMER ROOFING WORK
ETHYLENE-PROPYLENE-DIENE-MONOMER ROOFING WORK PART 1 GENERAL 1.1 REFERENCES The publications listed below form a part of this specification to the extent referenced. The publications are referred to within
More informationGarage Sectional Doors
Garage Sectional Doors FROM TECKENTRUP TOP CLASS QUALITY DOORS MADE OF STEEL; ALUMINIUM OR WOOD W E O P E N T H E D O O R S F O R P R O G R E S S ECONOMICAL AND SPACE-SAVING FOR EVERY STRUCTURAL SITUATION
More informationLight Architecture. Colors Sweden. Light
Light Architecture Danpalon is the complete daylighting solution offering exceptional quality of light, thermal insulation and UV protection with a rich non-industrial visual appeal. The Danpalon system
More information- - - - Steel Panel Frame. Exterior Steel Sheeting. Optional Rigid Insulation. Optional Steel Insulation Liner
The Kelly Klosure pre-framed modular panel has 4 components that are factory finished to create an easy and versatile bolt-together system in the field. Steel Panel Frame Exterior Steel Sheeting Optional
More information% Si Fe Cu Mn Mg Cr Zn Ti Others Others. Europe USA Spain France Germany G.B. Italy Sweden Switzerland Japan. ALMgSi1 3.3215 H30
ALUMINIUMS Alloys Aluminium - Magnesium - Silicon 6082 % Si Fe Cu Mn Mg Cr Zn Ti Others Others Minimum 0,70 0,40 0,60 Each Total Maximum 1,30 0,50 0,10 1,00 1,20 0,25 0,20 0,10 0,05 0,10 Europe USA Spain
More informationMaster Panel 1000 W Wall
Master Panel 1000 W Wall Product Description In order to generate an aesthethic outlook wall panels are generally produced as micro hedge. Besides, in connection points concealed screw is used which provides
More informationNickel Free Room Temperature Seal: an innovative and ecological process
Nickel Free Room Temperature Seal: an innovative and ecological process 2015 ANODIZING CONFERENCE San Diego, California Prepared by: Marcello Rossi Italtecno Srl Italy NICKEL FREE ROOM TEMPERATURE SEAL:
More informationA pro s guide to photo prints on Alu-dibond
A pro s guide to photo prints on Alu-dibond The way for professional photographers to get the best results out of Alu-dibond XXLPIX 2013 For professional photographers only Table of content Alu-Dibond...3
More informationSECTION 07400 STANDING SEAM METAL ROOF
SECTION 07400 STANDING SEAM METAL ROOF PART 1 - GENERAL 1.01 SECTION INCLUDES A. Work described in this section includes pre-formed standing seam metal roofing system complete with clips, perimeter and
More informationCLEAR-DIVISIONS APERTO
CLEAR-DIVISIONS Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS moveable glass wall system. The yellow highlighted areas in the
More informationOnce we have you covered, you re covered.
3M Graphics Warranties Once we have you covered, you re covered. 3M Basic Product Warranty 3M Performance Guarantee 3M Basic Product Warranty Ready to go, out of the box. Prepare to be amazed. No physical
More informationTECHICAL SPECIFICATION IP65 EMI EMC Gaskets
Pag. 1/5 TECHICAL SPECIFICATION IP65 EMI EMC Gaskets Description Market requirements permit us to offer different gaskets that cover the double function of watertight seals and electromagnetic interference
More informationConstruction. 3-part thixotropic epoxy patching mortar. Product Description. Tests
Product Data Sheet Edition 05/12/2014 Identification no: 020204030010000044 Sikadur -41 CF Rapid 3-part thixotropic epoxy patching mortar Construction Product Description Uses Characteristics / Advantages
More informationPHOTOVOLTAIC (PV) solar panels. Specification. Electricity - CE & ISO 9000 certified. 83W panel. 180W panel Maximum power:
PHOTOVOLTAIC (PV) solar panels Electricity - CE & ISO 9000 certified Photovoltaic solar panels convert sunlight into useful electricity. ZEDfabric supplies high quality mono-crystalline silicon cell PV
More information