DRAFT ÖNORM EN
|
|
- Bruno Reynolds
- 7 years ago
- Views:
Transcription
1 DRAFT ÖNORM EN Edition: Thermal spraying Safety requirements for thermal spraying equipment Part 3: Torches for thermal spraying and their connection and supply units Thermisches Spritzen Sicherheitsanforderungen für Einrichtungen für das thermische Spritzen Teil 3: Brenner und Spritzpistolen und ihre Anschlüsse und Stromquellen Projection thermique Exigences de sécurité relatives au matériel de projection thermique Partie 3 : Chalumeaux de projection thermique et leurs unités de raccordement et d`alimentation Note: Because of possible comments, the final version of this ÖNORM can differ from the present Draft. Please send your comments (in writing) by to Austrian Standards Institute. Publisher and printing Austrian Standards Institute/ Österreichisches Normungsinstitut (ON) Heinestraße 38, 1020 Wien Copyright Austrian Standards Institute All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means electronic, mechanical and photocopying or any other data carrier without prior permission! publishing@as-plus.at Internet: Sale and distribution of national and foreign standards and technical regulations via Austrian Standards plus GmbH Heinestraße 38, 1020 Wien sales@as-plus.at Internet: Webshop: Tel.: Fax: ICS Identical (IDT) with pren : responsible Committee 050 Paints and varnishes
2 DRAFT ÖNORM EN :2012 Explanations concerning Draft The present Draft European Standard EN has been submitted to CEN members for voting. In case of a positive result of the voting as required by CEN/CENELEC regulations, this Draft will be published as EN. Like all member organizations of CEN, Austrian Standards Institute is basically obliged to implement European Standards in Austria and to withdraw conflicting standards. Austrian Standards Institute herewith submits this Draft of a European Standard as Draft ÖNORM to public enquiry and information. Comments on this Draft Please find below some practical instructions intended to offer you and the responsible committee assistance for the processing of comments and proposals for modification: Form Structure Language Script/Format Dispatch Aspects concerning patent law For your comments/proposals for change, please use the relevant form available from Internet. Download under or use the Draft Standard Portal Please use a new line for each comment. This facilitates the attribution of the comments received to the different clauses and chapters of the respective Draft. Please formulate technical comments on European Standards if possible in English, since English is the common working language of the most European standardizing bodies. Editorial and/or linguistic proposals for change/improvement of German versions of European Standards shall (certainly) be submitted in German. Please use the script Arial with 9 pt font size. Please do not change the formats. Please send your comments by to the responsible Committee Manager (dagmar.schermann@as-institute.at) The recipients of this Draft ÖNORM are requested to add information on any patent rights known to their comments and to provide supporting documentation, if available. 2
3 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM DRAFT pren June 2012 ICS English Version Thermal spraying - Safety requirements for thermal spraying equipment - Part 3: Torches for thermal spraying and their connection and supply units Projection thermique - Exigences de sécurité relatives au matériel de projection thermique - Partie 3 : Chalumeaux de projection thermique et leurs unités de raccordement et d'alimentation Thermisches Spritzen - Sicherheitsanforderungen für Einrichtungen für das thermische Spritzen - Teil 3: Brenner und Spritzpistolen und ihre Anschlüsse und Stromquellen This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 240. If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation. Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. pren :2012: E
4 pren :2012 (E) ÖNORM DRAFT Contents Page Foreword Scope Normative references Function of thermal spraying equipment General Safety related features of the spray torches and their connections Spray torches for flame and HVOF spraying Spray torches for cold spraying Spray torches for arc spraying Spray torches for plasma spraying Safety related features of the current water connections in the junction and monitoring box (JAM Box) Safety related features of the power source Potential hazards General Flame and HVOF spraying Cold spraying Arc spraying Plasma spraying Safety requirements Protection measures General safety requirements and measures Safety requirements and protection measures for flame and HVOF spraying Safety requirements and protection measures for cold spraying Safety requirements and protection measures for arc and plasma spraying Safety requirements to current water connections to and in the junction and monitoring box Safety requirements for power sources Requirements for manufacture, supply, operation, and maintenance Requirements for the manufacturer Requirements for the user National rules...9 Bibliography
5 ÖNORM DRAFT pren :2012 (E) Foreword This document (pren :2012) has been prepared by Technical Committee CEN/TC 240 Thermal spraying and thermally sprayed coatings, the secretariat of which is held by DIN. This document is currently submitted to the CEN Enquiry. EN consists of the following parts: EN , Thermal spraying Safety requirements for thermal spraying equipment Part 1: General requiremqnts EN , Thermal spraying Safety requirements for thermal spraying equipment Part 2: Gas control units pren , Thermal spraying Safety requirements for thermal spraying equipment Part 3: Torches for thermal spraying and their connection and supply units pren , Thermal spraying Safety requirements for thermal spraying equipment Part 4: Gas and liquid fuel supply pren , Thermal spraying Safety requirements for thermal spraying equipment Part 5: Powder and wire feed units prcen/tr , Thermal spraying Safety requirements for thermal spraying equipment Part 6: Spray cabin, handling system, dust collection, exhaust system, filter 3
6 pren :2012 (E) ÖNORM DRAFT 1 Scope This part of EN specifies safety requirements of machines and equipment for thermal spraying, in this case of spray torches, gas hoses, hose assemblies and their current and water junctions in junction and monitoring boxes and power sources. Equipment and storage for gas and liquid fuel supply are not in the scope of this part of EN 15339, they are presented in pren This part of EN should be used in conjunction with pren , which deals with general aspects when designing, manufacture, and/or putting in service of machines or equipment and with the responsibility to issue the CE Conformity Declaration. Spraying equipment for specific thermal spraying processes, induction plasma spraying, water stabilised plasma spraying and vacuum plasma spraying are not within the scope of this part of EN Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 657, Thermal spraying Terms, classification EN 1256, Gas welding equipment Specification for hose assemblies for equipment for welding, cutting and allied processes pren , Thermal spraying Safety requirements for thermal spraying equipment Part 1: General requirements prcen/tr , Thermal spraying Safety requirements for thermal spraying equipment Part 6: Spray cabin, handling system, dust collection, exhaust system, filter EN , Arc welding equipment Part 1: Welding power sources (IEC ) EN , Arc welding equipment Part 3: Arc striking and stabilizing devices (IEC ) EN , Arc welding equipment Part 7: Torches (IEC ) EN , Arc welding equipment Part 10: Electromagnetic compatibility (EMC) requirements (IEC ) EN ISO 3821, Gas welding equipment Rubber hoses for welding, cutting and allied processes (ISO 3821) 3 Function of thermal spraying equipment 3.1 General Thermal spray processes and spray torches are described and schematically represented in EN 657. Thermal spray processes use flammable gases for flame-, plasma- or HVOF (high velocity oxygen fuel) spraying, which create a significant potential hazard. Pure oxygen shall also be considered a dangerous gas, because relatively non-flammable material will burn in the presence of a certain concentration of oxygen. 4
DRAFT ÖNORM EN 16602-40-12
DRAFT ÖNORM EN 16602-40-12 Edition: 2013-12-15 Space product assurance Fault tree analysis Adoption notice ECSS/IEC 61025 Raumfahrtproduktsicherung Fehlerbaumanalyse Adoption notice ECSS/IEC 61025 Assurance
More informationONR CEN/TS 16555-5. Innovation management Part 5: Collaboration management (prcen/ts 16555-5:2014) DRAFT ICS 03.100.40; 03.100.50
ICS 03.100.40; 03.100.50 DRAFT ONR CEN/TS 16555-5 Innovation management Part 5: Collaboration management (prcen/ts 16555-5:2014) Innovationsmanagement Teil 5: Partnermanagement (prcen/ts 16555-5:2014)
More informationEN ISO 10993-1. Biological evaluation of medical devices. Part 1: Evaluation and testing within a risk management process
ÖNORM EN ISO 10993-1 Edition: 2011-03-15 Biological evaluation of medical devices Part 1: Evaluation and testing within a risk management process (consolidated version) Biologische Beurteilung von Medizinprodukten
More informationONR CEN/TS 16555-3. Innovation management Part 3: Innovation thinking (prcen/ts 16555-3:2014) DRAFT ICS 03.100.40; 03.100.50
ICS 03.100.40; 03.100.50 DRAFT ONR CEN/TS 16555-3 Innovation management Part 3: Innovation thinking (prcen/ts 16555-3:2014) Innovationsmanagement Teil 3: Integriertes Design-Management (prcen/ts 16555-3:2014)
More informationEN ISO 14121-1. Safety of machinery Risk assessment. Sicherheit von Maschinen Risikobeurteilung Teil 1: Leitsätze (ISO 14121-1:2007)
ÖNORM EN ISO 14121-1 Edition: 2008-01-01 Safety of machinery Risk assessment Part 1: Principles (ISO 14121-1:2007) Sicherheit von Maschinen Risikobeurteilung Teil 1: Leitsätze (ISO 14121-1:2007) Sécurité
More informationDRAFT ÖNORM EN ISO 11986
DRAFT ÖNORM EN ISO 11986 Edition: 2009-10-01 Ophthalmic optics Contact lenses and contact lens care products Determination of preservative uptake and release (ISO/DIS 11986:2009) Augenoptik Kontaktlinsen
More informationEN ISO 8253-1. Acoustics Audiometric test methods. Part 1: Pure-tone air and bone conduction audiometry
ÖNORM EN ISO 8253-1 Edition: 2011-04-15 Acoustics Audiometric test methods Part 1: Pure-tone air and bone conduction audiometry (ISO 8253-1:2010) Akustik Audiometrische Prüfverfahren Teil 1: Grundlegende
More informationPart 13: Determination of secant modulus of elasticity in compression
ÖNORM EN 12390-13 Edition: 2013-12-15 Testing hardened concrete Part 13: Determination of secant modulus of elasticity in compression Prüfung von Festbeton Teil 13: Bestimmung des Elastizitätsmoduls unter
More informationÖNORM EN 1504-8. The European Standard EN 1504-8 has the status of an Austrian Standard. Edition: 2005-02-01. Standards group B
ÖNORM EN 1504-8 Edition: 2005-02-01 Standards group B Identical (IDT) with EN 1504-8:2004 ICS 91.080.40 Products and systems for the protection and repair of concrete structures Definitions, requirements,
More informationONR CEN/TS 419241. Security Requirements for Trustworthy Systems Supporting Server Signing (prcen/ts 419241:2013) DRAFT ICS 35.240.
ICS 35.240.99 DRAFT ONR CEN/TS 419241 Security Requirements for Trustworthy Systems Supporting Server Signing (prcen/ts 419241:2013) Sicherheitsanforderungen für Vertrauenswürdige Systeme, die Serversignaturen
More informationDRAFT ÖNORM EN ISO 22476-9
DRAFT ÖNORM EN ISO 22476-9 Edition: 2009-11-15 Geotechnical investigation and testing Field testing Part 9: Field vane test (ISO/DIS 22476-9:2009) Geotechnische Erkundung und Untersuchung Felduntersuchungen
More informationÖNORM EN 1643. Valve proving systems for automatic shut-off valves for gas burners and gas appliances
ÖNORM EN 1643 Edition: 2001-01-01 Standards groups H and M Identical (IDT) with ICS 23.060.20 Valve proving systems for automatic shut-off valves for gas burners and gas appliances Ventilüberwachungssysteme
More informationDEUTSCHE NORM June 2003. Plastics Determination of flexural properties (ISO 178 : 2001) English version of DIN EN ISO 178
DEUTSCHE NORM June 2003 Plastics Determination of flexural properties (ISO 178 : 2001) English version of DIN EN ISO 178 { EN ISO 178 ICS 83.080.01 Kunststoffe Bestimmung der Biegeeigenschaften (ISO 178
More informationHYGROTHERMAL PERFORMANCE OF
IRISH STANDARD I.S. EN ISO 15927-5:2005 ICS 07.060 91.120.10 HYGROTHERMAL PERFORMANCE OF BUILDINGS - CALCULATION AND PRESENTATION OF CLIMATIC DATA - PART National Standards Authority of Ireland Glasnevin,
More informationCOPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN 1515-1:2000
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 1515-1 November 1999 ICS 21.060.10; 21.060.20; 23.040.60 English version Flanges and their joints - Bolting - Part 1: Selection of bolting Brides
More informationMARKING CODES FOR RESISTORS AND CAPACITORS (IEC 60062:2004) IRISH STANDARD I.S. EN 60062:2005. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN 60062:2005 ICS 31.020 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie MARKING CODES FOR RESISTORS
More informationDEUTSCHE NORM February 2004 DIN EN ISO 18265 {
DEUTSCHE NORM February 2004 DIN EN ISO 18265 { ICS 77.040.10 Supersedes DIN 50150, October 2000 edition. Metallic materials Conversion of hardness values (ISO 18265 : 2003) English version of DIN EN ISO
More informationCOPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM ICS 91.060.50 English version EN 12045 June 2000 Shutters and blinds power operated - Safety in use - Measurement of the transmitted force Fermetures,
More informationMetallic products Types of inspection documents
BRITISH STANDARD BS EN 10204:2004 Metallic products Types of inspection documents The European Standard EN 10204:2004 has the status of a British Standard ICS 01.110; 77.080.01; 77.120.01 BS EN 10204:2004
More informationEnglish version. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 4162 2012 ICS: 49.030.20 English version Aerospace series Screws 100 countersunk normal head, offset cruciform recess, coarse tolerance normal shank,
More informationInstallation and equipment for liquefied natural gas - Design and testing of loadinglunloading arms
Edition: 1997-1 1-01 ldentical (IDT) with EN 1474:1997 Supersedes 1 ICS 75.200 Installation and equipment for liquefied natural gas - Design and testing of loadinglunloading arms Anlagen und Ausrüstung
More informationAEROSPACE SERIES - QUALIFICATION AND APPROVAL OF PERSONNEL FOR NON-DESTRUCTIVE TESTING IRISH STANDARD I.S. EN 4179:2006.
IRISH STANDARD I.S. EN 4179:2006 ICS 49.020 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland AEROSPACE SERIES - QUALIFICATION AND APPROVAL OF PERSONNEL FOR Tel: +353 1 807 3800 Fax:
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1 : Taper external threads and parallel internal threads - Dimensions, tolerances and designation
More informationDEUTSCHE NORM September 2003
DEUTSCHE NORM September 2003 Smoke and heat control systems Part 2: Specification for natural smoke and heat exhaust ventilators English version of DIN EN 12101-2 { EN 12101-2 ICS 13.220.99 Rauch- und
More informationGeneral requirements for bodies operating assessment and certificationlregistration of quality systems (ISOIIEC Guide 6ZA996)
Edition: 1998-05-01 ldentical (IDT) with ÖVE EN 4501 2: I998 ISOIIEC 62 Guide: 1996 Supersedes ÖNORM EN 4501 2: 1990-06-08 ÖNORM EN 45012 Bbl 1:1990 08 ICS 03.1 20.20 General requirements for bodies operating
More informationWood flooring and parquet Characteristics, evaluation of conformity and marking
ÖNORM EN 14342 Edition: 2013-09-15 Wood flooring and parquet Characteristics, evaluation of conformity and marking Holzfußböden und Parkett Eigenschaften, Bewertung der Konformität und Kennzeichnung Planchers
More informationWelding coordination Tasks and responsibilities
BRITISH STANDARD BS EN ISO 14731:2006 Welding coordination Tasks and responsibilities The European Standard EN ISO 14731:2006 has the status of a British Standard ICS 25.160.01 BS EN ISO 14731:2006 National
More informationOutdoor furniture Seating and tables for camping, domestic and contract use
BRITISH STANDARD BS EN 581-1:2006 Outdoor furniture Seating and tables for camping, domestic and contract use Part 1: General safety requirements The European Standard EN 581-1:2006 has the status of a
More informationInformation supplied by the manufacturer with medical devices
Irish Standard I.S. EN 1041:2008 Information supplied by the manufacturer with medical devices NSAI 2008 No copying without NSAI permission except as permitted by copyright law. I.S. EN 1041:2008 Incorporating
More informationMEASUREMENT OF FLUID FLOW BY MEANS OF PRESSURE DIFFERENTIAL DEVICES INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL - PART 1:
STANDARD I.S. EN ISO 5167-1:2003 ICS 17.120.10 MEASUREMENT OF FLUID FLOW BY MEANS OF PRESSURE DIFFERENTIAL DEVICES National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01)
More informationASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - REQUIREMENTS AND TEST METHODS FOR DESIGN CONFORMANCE TESTING, QUALITY CONFORMANCE TESTING AND
IRISH STANDARD I.S. EN ISO 6789:2003 ICS 25.140.30 ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - REQUIREMENTS AND TEST METHODS FOR National Standards Authority of Ireland Dublin 9 Ireland Tel:
More informationDEUTSCHE NORM August 2001. Steel wire for mechanical springs Part 3: Stainless spring steel wire English version of DIN EN 10270-3
DEUTSCHE NORM August 2001 Steel wire for mechanical springs Part 3: Stainless spring steel wire English version of DIN EN 10270-3 { EN 10270-3 ICS 77.140.25; 77.140.65 Stahldraht für Federn Teil 3: Nicht
More informationThis document is a preview generated by EVS
CEN WORKSHOP CWA 16926-7 August 2015 AGREEMENT ICS 35.240.40; 35.240.15; 35.200 English version Extensions for Financial Services (XFS) interface specification Release 3.30 - Part 7: Check Reader/Scanner
More informationFASTENERS - ACCEPTANCE INSPECTION (ISO 3269:2000) IRISH STANDARD I.S. EN ISO 3269:2000. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN ISO 3269:2000 ICS 21.060.01 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 FASTENERS - ACCEPTANCE INSPECTION (ISO 3269:2000) NSAI
More informationWINDOWS AND DOORS - WATERTIGHTNESS - TEST METHOD IRISH STANDARD I.S. EN 1027:2000. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN 1027:2000 ICS 91.060.50 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 WINDOWS AND DOORS - WATERTIGHTNESS - TEST METHOD NSAI 2000
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 927-6:2006 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and
More informationEnglish Version. Security service providers - Terminology
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 15602 January 2008 ICS 01.040.03; 01.040.13; 03.080.20; 13.310 English Version Security service providers - Terminology Prestataires de services de
More informationEnglish Version. Fire safety storage cabinets - Part 2: Safety cabinets for pressurised gas cylinders
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 14470-2 August 2006 ICS 13.220.40; 71.040.10 English Version Fire safety storage cabinets - Part 2: Safety cabinets for pressurised gas cylinders
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 22005:2008 Traceability in the feed and food chain - General principles and basic requirements for system design and implementation Traceability in the feed and food chain - General
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 17573 June 2003 ICS 35.240.60 English version Road Transport and Traffic Telematics Electronic Fee Collection (EFC) System
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 16601-10-01:2014 Space project management - Part 10-01: Organization and conduct of reviews EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN 16601-10-01:2014 sisaldab
More informationSHIPS AND MARINE TECHNOLOGY -
IRISH STANDARD I.S. EN ISO 7547:2005 ICS 47.020.80 47.020.90 SHIPS AND MARINE TECHNOLOGY - AIR-CONDITIONING AND VENTILATIION OF ACCOMMODATION SPACES - DESIGN National Standards Authority of Ireland Glasnevin,
More informationKrav til sikkerhed for sekundære batterier og installationer af batterier Del 2: Stationære batterier
Dansk standard DS/EN 50272-2 1. udgave 2001-08-10 Krav til sikkerhed for sekundære batterier og installationer af batterier Del 2: Stationære batterier Safety requirements for secondary batteries and battery
More informationSpecification and qualification of welding procedures for metallic materials Welding procedure specification
BRITISH STANDARD BS EN ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding The European Standard EN ISO 15609-1:2004
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 50363-10-2:2005 Madalpingeliste jõukaablite isoleer-, mantli- ja kattematerjalid. Osa 10-2: Mitmesugused mantlikompaundid. Termoplastiline polüuretaan Insulating, sheathing and covering
More informationEESTI STANDARD EVS-EN ISO 877-3:2011
EESTI STANDARD EVS-EN ISO 877-3:2011 Plastics - Methods of exposure to solar radiation - Part 3: Intensified weathering using concentrated solar radiation (ISO 877-3:2009) EESTI STANDARDI EESSÕNA Käesolev
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1047-2:2009+A1:2013 Secure storage units - Classification and methods of test for resistance to fire - Part 2: Data rooms and data container EESTI STANDARDI EESSÕNA NATIONAL FOREWORD
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 10263-3:2001 Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels Steel rod, bars and wire for cold heading
More informationPlastics - Verification of pendulum impacttesting machines - Charpy, Izod and tensile
Irish Standard I.S. EN ISO 13802:2015 Plastics - Verification of pendulum impacttesting machines - Charpy, Izod and tensile impact-testing (ISO/FDIS 13802:2015) CEN 2015 No copying without NSAI permission
More informationSkovbrugsmaskiner Sikkerhedskrav til og prøvning af motordrevne stangsave til beskæring Del 2: Maskiner med rygbåret energikilde
Dansk standard DS/EN ISO 11680-2 3. udgave 2012-01-18 Skovbrugsmaskiner Sikkerhedskrav til og prøvning af motordrevne stangsave til beskæring Del 2: Maskiner med rygbåret energikilde Machinery for forestry
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 40-3-3:2013 Lighting columns - Design and verification - Part 3-3: Verification by calculation EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN 40-3-3:2013 sisaldab
More informationQuality requirements for fusion welding of metallic materials
BRITISH STANDARD BS EN ISO 3834-2:2005 Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements The European Standard EN ISO 3834-2:2005 has the status of
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13201-5:2015 Road lighting - Energy performance indicators EVS-EN 13201-5:2015 EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN 13201-5:2015 sisaldab Euroopa standardi
More informationAmbient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
Irish Standard I.S. EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter CEN 2014 No copying
More informationMedicininiai sterilizatoriai. Žematemperatūriai gariniai ir formaldehidiniai sterilizatoriai. Reikalavimai ir bandymai
LIETUVOS STANDARTAS LST EN 14180 ANGLIŠKOJI VERSIJA 2014 m. rugs jis ICS 11.080.10 Pakeičia LST EN 14180:2004+A2:2009 Medicininiai sterilizatoriai. Žematemperatūriai gariniai ir formaldehidiniai sterilizatoriai.
More information1. Perception of the Bancruptcy System... 2. 2. Perception of In-court Reorganisation... 4
Bankruptcy Systems and In-court Reorganisation of Firms, 2010 Content: 1. Perception of the Bancruptcy System... 2 2. Perception of In-court Reorganisation... 4 3. Perception of Creditor Committees, Fast
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 16031:2012 Adjustable telescopic aluminium props - Product specifications, design and assessment by calculation and tests EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13718-2:2008 Meditsiinis kasutatavad liiklusvahendid ja nende varustus. Kiirabilennukid/helikopterid. Osa 2: Kiirabilennukite/helikopterite tootmis- ja tehnilised nõuded Medical vehicles
More informationConformity assessment Requirements for bodies providing audit and certification of management systems
BRITISH STANDARD Conformity assessment Requirements for bodies providing audit and certification of management systems The European Standard has the status of a British Standard ICS 03.120.20 BS EN ISO/IEC
More informationErgonomi Fysisk miljø Anvendelse af internationale standarder for personer med særlige behov
Dansk standard DS/EN ISO 28803 1. udgave 2012-04-23 Ergonomi Fysisk miljø Anvendelse af internationale standarder for personer med særlige behov Ergonomics of the physical environment Application of international
More informationICS 75.160.20 Supersedes EN 228:2004. English Version. Automotive fuels - Unleaded petrol - Requirements and test methods
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 228 July 2008 ICS 75.160.20 Supersedes EN 228:2004 English Version Automotive fuels - Unleaded petrol - Requirements and test methods Carburants pour
More informationSVENSK STANDARD SS-EN 50271
SVENSK STANDARD SS-EN 50271 Fastställd Utgåva Sida Ingår i Svenska Elektriska Kommissionen, SEK 2002-04-18 1 1 (1+9) SEK Område 31 Copyright SEK. Reproduction in any form without permission is prohibited.
More informationNEW PASSENGER CAR REGISTRATIONS BY ALTERNATIVE FUEL TYPE IN THE EUROPEAN UNION 1 Quarter 4 2015
NEW PASSENGER CAR REGISTRATIONS BY ALTERNATIVE FUEL TYPE IN THE Quarter 4 2015 Alternative fuel vehicle (AFV) registrations: +20.0% in 2015; +21.1% in Q4 In the fourth quarter of 2015, total alternative
More informationThis document is a preview generated by EVS. Helmets for pedal cyclists and for users of skateboards and roller skates
EESTI STANDARD EVS-EN 1078:2012+A1:2013 Helmets for pedal cyclists and for users of skateboards and roller skates EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN 1078:2012+A1:2013 sisaldab
More informationInterneto turinio ir ryšių filtravimo programin įranga ir tarnybos
TECHNINö SPECIFIKACIJA LST CEN/TS 16080 ANGLIŠKOJI VERSIJA 2014 m. sausis ICS 35.080; 35.240.99 Interneto turinio ir ryšių filtravimo programin įranga ir tarnybos Internet Content and communications filtering
More informationThe Guardianship Service
The Guardianship Service How can they help you? When you arrive in Belgium Are you under the age of 18 and have you arrived in Belgium without your father or mother? You are searching for support and accommodation
More informationDRAFT ÖNORM ISO/IEC 27005
DRAFT ÖNORM ISO/IEC 27005 Edition: 2013-07-01 Information technology Security techniques Information security risk management (ISO/IEC 27005:2011) Informationstechnologie Sicherheitstechnik Informationssicherheits-
More informationFEDERATION EUROPEENNE DE LA MANUTENTION Product Group. industrial trucks. A brief guide for identification of noncompliant. - Exhaust Emission -
FEDERATION EUROPEENNE DE LA MANUTENTION Product Group Industrial Trucks FEM A brief guide for identification of noncompliant industrial trucks 11.2010 (E) - Exhaust Emission - I n d e x 1 Introduction...
More informationCOMMUNICATION FROM THE COMMISSION
EUROPEAN COMMISSION Brussels, 17.9.2014 C(2014) 6767 final COMMUNICATION FROM THE COMMISSION Updating of data used to calculate lump sum and penalty payments to be proposed by the Commission to the Court
More informationHEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS STANDARD I.S. EN 14213:2003. Price Code
STANDARD I.S. EN 14213:2003 ICS 75.160.20 National Standards Authority of Ireland Dublin 9 Ireland HEATING FUELS - FATTY ACID METHYL Tel: (01) 807 3800 Fax: (01) 807 3838 ESTERS (FAME) - REQUIREMENTS AND
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14052:2012 Suure vastupidavusega tööstuslikud kiivrid High performance industrial helmets EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN 14052:2012 sisaldab Euroopa
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15603:2008 Energy performance of buildings - Overall energy use and definition of energy ratings Energy performance of buildings - Overall energy use and definition of energy ratings
More informationEESTI STANDARD EVS-EN 13606-4:2007. Health informatics - Electronic health record communication - Part 4: Security
EESTI STANDARD EVS-EN 13606-4:2007 Health informatics - Electronic health record communication - Part 4: Security EESTI STANDARDI EESSÕNA Käesolev Eesti standard EVS-EN 13606-4:2007 sisaldab Euroopa standardi
More informationEmployee eligibility to work in the UK
Employee eligibility to work in the UK This document details legal requirements that apply to ALL new members of staff All employers in the UK are legally bound to comply with the Asylum and Immigration
More informationStructural steel equal and unequal leg angles
BRITISH STANDARD BS EN 10056-2:1993 Specification for Structural steel equal and unequal leg angles Part 2: Tolerances on shape and dimensions The European Standard EN 10056-2:1993 has the status of a
More informationERASMUS+ MASTER LOANS
ERASMUS+ MASTER LOANS Erasmus+ Master Loan: opening up access to more affordable lending for cross-border studies The Erasmus+ programme makes it possible for students who want to take a full Masters level
More informationEESTI STANDARD EVS-EN 62507-1:2011
EESTI STANDARD EVS-EN 62507-1:2011 Identification systems enabling unambiguous information interchange - Requirements - Part 1: Principles and methods EESTI STANDARDI EESSÕNA Käesolev Eesti standard EVS-EN
More informationNaturgas Bestemmelse af sammensætning med defineret usikkerhed ved gaskromatografi Del 2: Usikkerhedsberegninger
Dansk standard DS/EN ISO 6974-2 2. udgave 2012-06-20 Naturgas Bestemmelse af sammensætning med defineret usikkerhed ved gaskromatografi Del 2: Usikkerhedsberegninger Natural gas Determination of composition
More informationLabour Force Survey 2014 Almost 10 million part-time workers in the EU would have preferred to work more Two-thirds were women
75/2015-27 April 2015 Labour Force Survey 2014 Almost 10 million part-time workers in the EU would have preferred to work more Two-thirds were women Among the 44.1 million persons in the European Union
More informationERASMUS+ MASTER LOANS
Ref. Ares(2015)660570-17/02/2015 ERASMUS+ MASTER LOANS Erasmus+ Master Loan: opening up access to more affordable lending for cross-border studies The Erasmus+ programme makes it possible for students
More informationFacility management Del 7: Vejledning i benchmarking af præstationer
Dansk standard DS/EN 15221-7 1. udgave 2012-11-06 Facility management Del 7: Vejledning i benchmarking af præstationer Facility Management Part 7: Guidelines for Performance Benchmarking DS/EN 15221-7
More information!,p@v" DIN EN 15038 { Translation services Service requirements English version of DIN EN 15038:2006-08
DEUTSCHE NORM August 2006 DIN EN 15038 { ICS 03.080.20 Translation services Service requirements English version of DIN EN 15038:2006-08 Übersetzungs-Dienstleistungen Dienstleistungsanforderungen Englische
More informationEnglish version. Manual for Determination of Combined Heat and Power (CHP)
CEN/CENELEC WORKSHOP CWA 45547 September 2004 AGREEMENT ICS 27.100 English version Manual for Determination of Combined Heat and Power (CHP) This CEN/CENELEC Workshop Agreement has been drafted and approved
More informationCredit transfer to Customer account with AS "Meridian Trade Bank" EUR, USD free of charge * - 4.1.2. Other countries currency information in the Bank
Pricelist for individuals residents of Latvia SERVICES 4. TRANSFERS In the Bank PRICE LIST IN EUR Using «MultiNet» 4.1. 4.1.1. Credit transfer to Customer account with EUR, USD free of charge * 4.1.2.
More informationAnalysis of statistics 2015
Analysis of statistics 215 January 216 ECHR Analysis of Statistics 215 Table of Contents Overview of the Court s statistics in 215... 4 A. Number of new applications... 4 B. Applications disposed of judicially
More informationKeeping European Consumers safe Rapid Alert System for dangerous non-food products 2014
Keeping European Consumers safe Rapid Alert System for dangerous non-food products 2014 COMPLETE STATISTICS Justice and Consumers Directorate-General for Justice and Consumers Directorate Consumers Unit
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14348:2005 Keemilised desinfektsioonivahendid ja antiseptikumid. Kvantitatiivne suspensioonikatse meditsiini valdkonnas, meditsiinilised instrumendid kaasa arvatud, kasutatava keemiliste
More informationFamily benefits Information about health insurance country. Udbetaling Danmark Kongens Vænge 8 3400 Hillerød. A. Personal data
Mail to Udbetaling Danmark Kongens Vænge 8 3400 Hillerød Family benefits Information about health insurance country A. Personal data Name Danish civil registration (CPR) number Address Telephone number
More informationISO 13845 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13845 First edition 2000-04-15 Plastics piping systems Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes Test method for
More informationGfK PURCHASING POWER INTERNATIONAL
GfK PURCHASING POWER INTERNATIONAL 1 Agenda 1. Europe 3 2. Americas 45 3. Asia & Near East 54 4. Afrika 66 5. Australia 68 6. Overview of countries and available levels 70 2 2 EUROPE 4 GfK
More information41 T Korea, Rep. 52.3. 42 T Netherlands 51.4. 43 T Japan 51.1. 44 E Bulgaria 51.1. 45 T Argentina 50.8. 46 T Czech Republic 50.4. 47 T Greece 50.
Overall Results Climate Change Performance Index 2012 Table 1 Rank Country Score** Partial Score Tendency Trend Level Policy 1* Rank Country Score** Partial Score Tendency Trend Level Policy 21 - Egypt***
More informationProposal from the Philippines for amendments to the Kyoto Protocol
UNITED NATIONS Distr. GENERAL FCCC/KP/CMP/2009/5 12 June 2009 Original: ENGLISH CONFERENCE OF THE PARTIES SERVING AS THE MEETING OF THE PARTIES TO THE KYOTO PROTOCOL Fifth session Copenhagen, 7 18 December
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 61010-2-040:2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040 Particular requirements for sterilizers and washer-disinfectors
More informationEnglish version. Specifications for a Web Accessibility Conformity Assessment Scheme and a Web Accessibility Quality Mark
CEN WORKSHOP CWA 15554 June 2006 AGREEMENT ICS 35.240.99 English version Specifications for a Web Accessibility Conformity Assessment Scheme and a Web Accessibility Quality Mark This CEN Workshop Agreement
More informationEnglish Version. Services of real estate agents - Requirements for the provision of services of real estate agents
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM ICS 03.080.30 English Version EN 15733 December 2009 Services of real estate agents - Requirements for the provision of services of real estate agents
More informationEnergy prices in the EU Household electricity prices in the EU rose by 2.9% in 2014 Gas prices up by 2.0% in the EU
92/2015-27 May 2015 Energy prices in the EU Household electricity prices in the EU rose by 2.9% in 2014 Gas prices up by 2.0% in the EU In the European Union (EU), household electricity prices 1 rose by
More information