Data Sheet. Sizes.: 0318/0623/0827/0932/0940/1140/1145/1550 Issued Date: 12-Apr-13
|
|
- Corey Stanley
- 7 years ago
- Views:
Transcription
1 Data Sheet Customer: Product: MGR Series Sizes.: 0318/0623/0827/0932/0940/1140/1145/1550 Issued Date: 12-Apr-13 Edition: REV.A1 VIKING TECH CORPORATION 光頡科技股份有限公司 No.70, Kuanfu N. Rad., Hsin Chu Industrial Park, Hukou Hsiang, Hsin Chu Hsien, 303, Taiwan TEL: FAX: VIKING TECH CORPORATION KAOHSIUNG BRANCH 光頡科技股份有限公司高雄分公司 No.248-3, Sin-Sheng Rd., Cian-Jhen Dist., Kaohsiung, 806, Taiwan TEL: FAX: WUXI TMTEC CO., LTD. 無錫泰銘電子有限公司 No.22 Xixia Road, Machinery & Industry Park, National Hi-Tech Industrial Development Zone of Wuxi, Wuxi, Jiangsu Province, China Zip Code: TEL: FAX: Produced by Checked Approved by Prepared by (Sales) 12-Apr Apr Apr Apr-13 Accepted by (Customer) Kris Ann Ben
2 Scope -Coat-Insulated megohm fixed resistors (Metal Glazed) -High voltage surge resistors Dimensions Unit: mm L D H d MGR ± ±0.3 28± ±0.03 MGR ± ±0.3 28± ±0.03 MGR ± ±0.5 27± ±0.03 MGR ± ±0.5 26± ±0.03 MGR ± ±0.5 26± ±0.03 MGR ± ±0.5 35± ±0.03 MGR ± ±0.5 35± ±0.03 MGR ± ±0.5 32± ±0.03 Part Numbering MGR 0932 F T F U 1004 S Product Dimensions (L D) Resistance Tolerance Packaging Code TCR Resistance Special 0318: 3.3x : 6.3x : 8.5x : 9.0x : 9.0x : 11.5x : 11.5x : 15.5x5.0 F: ±1% J: ±5% K: ±10% A: Ammo T: Taping Reel E: ±100 F: ±200 : Standard W: 1/8W V: 1/4W U: 1/2W T: 1W S: 2W R: 3W 1003: 100KΩ 1004: 1MΩ 1007: 1GΩ S: Silicone E: Epoxy Derating Curve Surface Temp Rise / / / Revision: 12-Apr-2013
3 Standard Electrical Specifications Item at 70 C /8W /4W Operating Temp. Range Working Overload Dielectric Withstanding Resistance Range TCR Silicone Epoxy /2W DC2000V 2500V 500V 700V -55 ~ +175 C ±1% ±5% ±10% DC500V 1000V 300V 400V 100KΩ ~ 100MΩ ±100 DC1600V AC1150V DC2000V AC1500V 400V 500V W DC3000V 4000V 500V 1000V W DC3500V 4000V 700V 1200V Electrical Specifications Item at 70 C /2W Operating Temp. Range Working Overload Dielectric Withstanding Resistance Range TCR Silicone Epoxy DC1700V 2500V 400V 500V /2W DC1800V 2500V 400V 500V W -55 ~ +175 C DC2500V 3500V 500V 700V W DC3500V 4000V 500V 1000V W DC3500V 4000V 700V 1200V ±1% ±5% ±10% Operating = (P*R) or operating voltage listed above, whichever is lower. Overload =2.5* (P*R) or overload voltage listed above, whichever is lower. Silicone coating color : Brown (Flame-Proof) Epoxy coating color : Light Blue Environmental Characteristics Short Time Overload Insulation Resistance Endurance Damp Heat with Load Dielectric Withstanding Pulse Overload Item Requirement Test Method ±(1.0%+0.05Ω) ±10,000MΩ Over ±(3.0%+0.05Ω) ±(5.0%+0.05Ω) By ±(1.0%+0.05Ω) JIS-C RCWV*2.5 or overload voltage whichever is lower for 5 seconds MIL-STD-202F Method ±50V DC During 1 min V-Block method MIL-STD-202F Method 108A 70 2 C, RCWV for 1000 hrs with 1.5 hrs ON and 0.5 hrs OFF MIL-STD-202F Method 103B 40 2 C, 90~95% R.H., for 1000 hrs with 1.5 hrs ON and 0.5 hrs OFF MIL-STD-202F Method 301 In V-Block for 1 minute JIS-C times RCWV for cycles with 1sec ON and 25 sec OFF Resistance To Soldering Heat ±(1.0%+0.05Ω) 260 ±5 for 10±1 seconds or 350 ±10 for 3.5±0.5 seconds Terminal Strength Tensile: 2.5kg Direct Load for 10 sec. In the direction off the terminal leads RCWV(Rated continuous working voltage)= (P*R) or Operating voltage whichever is lower Storage Temperature: 25±3 C; Humidity < 80%RH 2 Revision: 12-Apr-2013
4 Taping/Packing Specifications 1.Standard (Reel & Ammo) Packing Methods Reel Packing 22 30'(16 ) mm leader at beginning 2 (1) RESISTOR (2) BANDOLIER (3) PAPER (4) FLANGE (5) CYLINDER Ammo Packing 3 1 Packaging 2 A Packing Methods Reel Packing Ammo Packing B1-B2 Max S Unit: mm Across Flange (A) Qty A B C Qty / , , / , , / , , / , , / , , / , , / , , / , ,000 2 Revision: 12-Apr-2013
5 Marking & Resistance Tolerance 1st ban 2nd band 3rd band 4th band 1st digit 2nd digit Multiplier Tolerance Color Digit Multiplier Tolerance Without Silver ±10% K Gold ±5.0% J Black Brown ±1.0% F Red Orange Yellow Green Blue Violet Grey White ±10% E ±5.0% ±1.0% E Revision: 12-Apr-2013
Pulse Withstanding Thick Film Chip Resistor-SMDP Series. official distributor of
Product: Pulse Withstanding Thick Film Chip Resistor-SMDP Series Size: /// official distributor of Pulse Withstanding Thick Film Chip Resistor-SMDP Series 1. Scope -This specification applies to ~ sizes
More informationType RP73 Series. SMD High Power Precision Resistors. Key Features. Applications. Characteristics - Electrical - RP73 Series - Standard
Key Features n High precision - tolerances down to 0.05% n Low TCR - down to 5ppm/ C n Stable high frequency performance n Operating temperature -55 C to +155 C n Increased power rating - up to 1.0W n
More informationSMD High Power Precision Resistors
Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications
More informationHigh-ohmic/high-voltage resistors
FEATURES High pulse loading capability Small size. APPLICATIONS Where high resistance, high stability and high reliability at high voltage are required High humidity environment White goods Power supplies.
More informationSPECIFICATION FOR APPROVAL. Approved by
C O N F I D E N T I A L D O C U M E N T SPECIFICATION FOR APPROVAL CONRAD Description : Royalohm Part no.: 0402WGxxxxxTCE (RMC 1/16W (0402) +/- 1%, 5% & Jumper) 0603SAxxxxxT5E (RMC 1/10W-S (0603) +/- 1%,
More informationHigh Ohmic (up to 68 MΩ)/ High Voltage (up to 10 kv) Resistors
High Ohmic (up to 68 MΩ)/ A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to the end-caps.
More informationHigh-ohmic/high-voltage resistors
FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS
More informationHigh Ohmic/High Voltage Metal Glaze Leaded Resistors
VR37 High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded
More informationHigh Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage Metal Glaze Leaded Resistors FEATURES Technology: Metal glaze A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive
More informationWW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors
WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxX_V12 Nov.- 2011
More informationHigh Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to
More informationDATA SHEET CHIP RESISTORS RT Series 1%; 0.5%; 0.25%; 0.1%
DATA SHEET CHIP RESISTORS Series 1%; 0.5%; 0.25%; 0.1% Product specification Supersedes Date of Sep. 30, 2003 ynsc004 ynsc015 ynsc002 ynsc007 2 SCOPE This specification describes series chip resistors
More informationHigh Ohmic/High Voltage Metal Film Leaded Resistors
, High Ohmic/High Voltage FEATURES Metal film technology High pulse loading (up to 10 kv) capability Small size (0207/0411) Compatible with lead (Pb)-free and lead containing soldering processes Compliant
More informationHigh Power Thick Film Chip Resistor 2512
Specifications: Type : MCHP12 Power Rating at 70 C : 2W Working Voltage : 250V Max. Overload Voltage : 500V Max. Dielectric Withstanding Voltage : 500V Temperature Range : -55 C to +155 C Ambient Temperature
More informationHigh Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage Metal Glaze Leaded Resistors FEATURES Technology: Metal glaze A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive
More informationSIL Resistor Network. Resistors. Electrical. Environmental. L Series. Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant
Resistors SIL Resistor Network Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2) Electrical Standard Resistance
More informationSPECIFICATION. Topview 5550 SMD LED IWS 505-RB. Product : Topview 5550 SMD LED Part No : IWS-505-RB Customer : Date : 2007. 11. 10 Ver.1.0.
SPECIFICATION Product : Topview 555 SMD LED Part No : Customer : Date : 27.. Ver.. Customer : Approval Manufacturer : ITSWELL Co., LTD Proposed By Approval Comment Suwon Company : 442-9, 82 Uman Industrial
More informationWR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402
WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 10 ASC_WR_V23 APR.- 2015
More informationTC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 1206, 0805, 0603
WF2Q, WF08Q, WF06Q ±%, ±0.5%, ±0.25%, ±0.%, ±0.05% TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 206, 0805, 0603 *Contents in this sheet are subject to change without
More informationMetal Film Resistors, Industrial, Precision
Metal Film Resistors, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Available Excellent high frequency characteristics Exceptionally
More informationAutomotive and Anti-Sulfuration Chip Resistor 0402
The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the
More informationEVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet 0603 Package Chip LED (0.8 mm Height) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
More informationDATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512
DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/005/ 1206/1210/121/2010/2512 Product specification August 22, 2014 V.0 Product specification 2 SCOPE This specification
More informationDATA SHEET HIGH POWER CHIP RESISTORS RC high power series 5%, 1% sizes 0603/0805/1206/2512. RoHS compliant & Halogen free
DATA SHEET HIGH POWER CHIP RESISTORS RC high power series 5%, 1% sizes 0603/005/1206/2512 RoHS compliant & Halogen free Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE
More informationTechnical Data Sheet 3.0mm Round Type LED Lamps
Features : Choice of various viewing angles Available on tape and reel. Reliable and robust Pb free Descriptions : The series is specially designed for applications requiring higher brightness The led
More information5W HI-POWER LED SPECIFICATION
5W HI-POWER LED SPECIFICATION HPG8b-495xWHCx Drawn by Checked by Approved by RoHS Conformity DATE:2013/4/9 REV:A HUEY JANN High Power 5W LED is made of GaInN chips with precise package technique which
More informationDATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0402 5%, 1% RoHS compliant & Halogen Free
DATA SHEET GENERAL PURPOSE CHIP RESISTORS 5%, 1% RoHS compliant & Halogen Free Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification describes series chip
More informationEVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Chip LED with Bi-Color (Multi-Color) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
More informationPrecision Leaded Resistors
FEATURES Approved according to CECC 40101-806 Advanced thin film technology Low TC: ± 15 to Precision tolerance of value: ± 0.1 % and ± 0.25 % Superior overall : class 0.05 Wide precision range: 10 Ω to
More informationTechnical Data Sheet 2.0*5.0mm Rectangle Type LED Lamps
Features : Choice of various viewing angles Available on tape and reel. Reliable and robust Pb free The product itself will remain within RoHS compliant version. Descriptions : The series is specially
More informationPower chip resistor size 2512 PRC221 5%; 2% FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability.
FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability. APPLICATIONS Power supplies Printers Computers Battery chargers Automotive Converters CD-ROM. QUICK
More informationHigh Ohmic / High Voltage Metal Glaze Leaded Resistors
High Ohmic / High Voltage Metal Glaze Leaded Resistors A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper
More information1.50mm Height 2220 Package Top View Full Color Chip LEDs Technical Data Sheet. Part No.: LL-R5050RGBC-001
.5mm Height 222 Package Top View Full Color Chip LEDs Technical Data Sheet Part No.: LL-R55RGBC- Spec No.: R55 Rev No.: V.2 Date: Mar./6/26 Page: OF 2 Features: P-LCC-6 package. White package. Optical
More informationDC Circuits (Combination of resistances)
Name: Partner: Partner: Partner: DC Circuits (Combination of resistances) EQUIPMENT NEEDED: Circuits Experiment Board One Dcell Battery Wire leads Multimeter 100, 330, 1k resistors Purpose The purpose
More informationMetal Film Resistors, Industrial, Precision
CMF Industrial Metal Film Resistors, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Excellent high frequency characteristics
More informationMetal Film Resistors, Non-Magnetic, Industrial, Precision
Metal Film Resistors, Non-Magnetic, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Excellent high frequency characteristics
More informationTechnical Data Sheet 5.0mm Round Type LED Lamps
Features : Choice of various viewing angles Available on tape and reel. Reliable and robust Pb free The product itself will remain within RoHS compliant version. Descriptions : The series is specially
More informationContents. 12. Lot Number 10. 13. Reel Packing Structure 11. 14. Precaution for Use 13. 15. Hazard Substance Analysis 14. 16. Revision History 18
Rev : 00 ISSUE NO : DATE OF ISSUE : 2009. 04. 10 S P E C I F I CATION MODEL : SLHNNWW629T1S0U0S0 [Rank : (S0), (U0), (S0)] HIGH POWER LED - SUNNIX6 CUSTOMER : CUSTOMER CHECKED CHECKED APPROVED SAMSUNG
More informationPart Marking Instructions Chip Resistors
Chip Resistors Part Marking Instructions Part Marking Instructions Chip Resistors 1% Marking The nominal resistance is marked on the surface of the overcoating with the use of 4 digit markings. 0201 and
More informationTechnical Data Sheet 3mm Infrared LED, T-1
Technical Data Sheet 3mm Infrared LED, T-1 Features High reliability High radiant intensity Peak wavelength p=85nm 2.54mm Lead spacing Low forward voltage Pb free HIR24 Descriptions EVERLIGHT s infrared
More informationEVERLIGHT ELECTRONICS CO., LTD.
ECN : PAGE : 1/7 Features : Fast response time High photo sensitivity Small junction capacitance High reliability Description : is a high speed silicon NPN epitaxial planar phototransistor in a compact
More informationCarbon Film Fixed Resistor Axial Leaded
Features Automatically insertable High quality performance Non-Flame type available Cost effective and commonly used Too low or too high values can be supplied on case to case basis Performance Specification
More informationSLLP-5630-150-G PRODUCT DATASHEET. RoHS Compliant
PRODUCT DATASHEET SLLP-5630-150-G Table of Contents Features... 1 Applications 1 Characteristics.. 1 Typical Electro optical Characteristics Curves... 3 Mechanical Dimensions... 4 Carrier Tape Dimensions.....
More information3. ELECTRICAL PERFORMANCE PROPERTY TEST CONDITION PERFORMANCE 3. 1 Contact Resistance 1) Center Push 100mΩ Max
1. GENERAL 1. 1 Application : This specification is applied to MULTI WAY SWITCH for electronic equipment. 1. 2 Operating Temperature Range :-25 ~ 70 1. 3 Storage Temperature Range :-0 ~ 85. However, 96
More information0.45mm Height 0402 Package Pure Green Chip LED Technical Data Sheet. Part No.: LL-S160PGC-G5-1B
.45mm Height 42 Package Pure Green Chip LED Technical Data Sheet Part No.: LL-S16PGC-G5-1B Spec No.: S16 Rev No.: V.2 Date: Dec./6/25 Page: 1 OF 9 Features: Package in 8mm tape on 7" diameter reel. Compatible
More informationMetal Film Resistors, Industrial, Flameproof
End of Life - August 13 Metal Film Resistors, Industrial, Flameproof STANDARD ELECTRICAL SPECIFICATIONS FEATURES Small physical size Low cost resistors have the ability to withstand overloads up to times
More informationDATA SHEET ARRAY CHIP RESISTORS YC/TC 5%, 1% sizes YC:102/104/122/124/162/164/248/324/158/358 TC: 122/124/164
Product specification December 11, 2015 V.2 0 DATA SHEET ARRAY CHIP RESISTORS YC/TC 5%, 1% sizes YC:102/104/2/4/162/164/248/324/158/358 TC: 2/4/164 RoHS compliant Product specification 2 SCOPE This specification
More informationSeries and Parallel Resistive Circuits Physics Lab VIII
Series and Parallel Resistive Circuits Physics Lab VIII Objective In the set of experiments, the theoretical expressions used to calculate the total resistance in a combination of resistors will be tested
More informationSMD PTC - Nickel Thin Film Linear Thermistors
SMD PTC - Nickel Thin Film Linear Thermistors Notes (1) Contact if closer TCR lot tolerance is desired. (2) Other R 25 -values and tolerances are available upon request. (3) Rated continuous working voltage
More informationAC and Pulse Film Foil Capacitors KP Radial Potted Type
AC and Pulse Film Foil Capacitors KP Radial Potted Type 0.5 L max. W max. Marking H max. FEATURES 5 mm lead pitch, supplied loose in box taped in ammopack or reel Material categorization: for definitions
More information550-xx05-004. 5mm LED CBI. Circuit Board Indicator Square Back Housing, Quad Block. 5 5 0 - x x 0 5-0 x 4
5mm LED CBI Circuit Board Indicator Square Back Housing, Quad Block 5.9 [.235] 3.8 [.145].35 [.250].35 [.250] 25 [.985].35 [.250] Red Cathode for Red/Green Bi-Color Cathode for /Green Bi-Color RECOMMENDED
More informationProduct Specification
Product Specification Model No.: DC-240-L01-00-TR Description: H=3.00mm Horizontal SMD DC Power Jacks Pin Shaft Diameter: 0.65mm Packing Method: Tape & Reel (600pcs./R) 1. General 1a. Scope The jacks should
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product Specification October 13, 11 V.8 Product
More informationDC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type MKT80 FEATURES AEC-Q00 qualified (rev. D) for PCM. mm (for larger available components on request) High temperature capabilities, up to 0 C Capacitance up to 60
More information1W High Power Purple LED Technical Data Sheet. Part No.: LL-HP60MUVA
1W High Power Purple LED Technical Data Sheet Part No.: LL-HP60MUVA Spec No.: HP60M Rev No.: V.2 Date: Aug./18/2009 Page: 1 OF 8 Features: Luckylight High power LED type. Lead frame type package (Heat
More informationProfessional Thin Film MELF Resistors
,, - Professional Professional Thin Film MELF Resistors, and professional thin film MELF resistors are the perfect choice for most fields of rn professional electronics where reliability and stability
More informationCapacitance Cap. Tol. Suffix construction. Rated voltage
Metallized Polypropylene Film Capacitors Type:ECWFE Plastic Film Capacitors Non-inductive construction using metalized Polypropylene film with flame retardant plastic case. Features Small size Excellent
More informationLuckylight. 1.9mm (0.8") 8 8 White Dot Matrix LED Displays Technical Data Sheet. Model No.: KWM-20882XWB-Y
.9mm (.8") 8 8 White Dot Matrix LED Displays Technical Data Sheet Model No.: KWM-88XWB-Y Spec No: W88C/D Rev No: V. Date: Sep// Page: OF Features:.8inch (.mm) Matrix height. Colors: White. Flat package
More informationInterference Suppression Film Capacitors MKP Radial Potted Type
Interference Suppression Film Capacitors MKP Radial Potted Type FEATURES 7.5 mm to 27.5 mm lead pitch Supplied loose in box, taped on reel Material categorization: For definitions of compliance please
More information帝 聞 企 業 股 份 有 限 公 司 DEE VAN ENTERPRISE CO., LTD. SP-235864 DSL-20WA 420024 1 Revision: A Date: 2011.10.24 FOR AC-DC LED DRIVER MODEL NO.
CUSTOMER: PART NUMBER: A200 APPROVAL SHEET FOR AC-DC LED DRIVER MODEL NO. DSL-20WA 420024 1 ORDER NO: SP-235864 承 認 書 确 認 后 請 簽 回 一 份 CUSTOMER APPROVED SIGNATURE DEE VAN ENTERPRISE CO., LTD (Head-Quarter)
More informationHarvatek Surface Mount LED Data Sheet. HT-F195 Series
Harvatek Surface Mount LED Data Sheet Official Product Product: Data Sheet No. Tentative Product **************** Jul. 15, 2005 Version of 1.4 Page 1/20 DISCLAIMER...3 PRODUCT SPECIFICATIONS...4 ATTENTION:
More information50W EdiStar. Approved By Customer. Designer Checker Approval. Ultra High Power LED
Ultra High Power LED 50W EdiStar EdiStar Emitter Approved By Customer Designer Checker Approval Date:2006/12/04 Version:Preliminary V0.1 4F, No. 800, Chung-Cheng Rd, Chung-Ho, Taipei 235, Taiwan Tel: 886-2-8227-6996
More information550-xx04. 5mm LED CBI Circuit Board Indicator Top View, Single. 5 5 0 x x 0 4 0 1 0 6-9. Features. Custom For custom LEDs contact factory.
.10 [.240] 5mm LED CBI Circuit Board Indicator Top View, Single.10 [.240] RECOMMENDED P.C. HOLE PATTERN A 3.43 [.135] for -0204 to -0404, 5.0 [.197] for all others B.35 [.025] for -0504 to -0704,.508 [.020]
More informationHigh Surge Axial Cemented Wirewound Resistors
High Surge Axial Cemented Wirewound Resistors FEATURES High voltage surge (up to 12 kv) withstanding capability Non flammable silicon cement coating High grade ceramic core Material categorization: for
More informationModel CS 64 Mini-DIN Cable and Adaptor
Model CS 64 Mini-DIN Cable and Adaptor Page 1 of 9 Features Hi-Pro and NOAHlink compatible cable & Mini-DIN CS 64 Clip Module / NOAHlink Adaptor #1 Integrated Clip Module - Mini-DIN Cable Integrated NOAHlink
More informationSMD Low Power LED 61-238/XK2C-BXXXXXXXXXX/ET
SMD Low Power LED Features P-LCC-6 package Top view LED Wide viewing angle:120 High Luminous intensity High Efficacy Pb-free RoHS-compliant. Description The Everlight 61-238 package has high efficacy,
More informationDC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type FEATURES 15 mm to 27.5 mm lead pitch. Supplied loose in box and taped on reel Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationThick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ010 and RZ020 Dual-In-Line, Molded DIP
MDM (Military M831/1 and /2) Thick Film Resistor Networks, Military, MIL-PRF-831 Qualified, Type RZ1 and RZ2 Dual-In-Line, Molded DIP STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL/ PIN NO. MIL STYLE
More informationFT-63 SINGLE TURN CERMET TRIMMERS FEATURES. PART NUMBER DESIGNATION F T - 6 3 E T V 5 k Ω ( 5 0 2 ) RoHS compliant
SINGLE TURN FT-6 RoHS compliant INTERNAL STRUCTURE 4 FEATURES RoHS compliant Resistance tolerance ± 0 % O ring sealed and washable Suitable for automatic insertion and automatic adjustment Increase in
More informationStandard Thick Film Chip Resistors
Standard Thick Film Chip Resistors FEATURES Stability R/R = 1 % for 00 h at 70 C 2 mm pitch packaging option for size Pure tin solder contacts on Ni barrier layer provides compatibility with lead (Pb)-free
More informationPRODUCT SPECIFICATION
PRODUCT SPECIFICTION SMD Type Size (mm):3.2*1.6*1.1 Emitting Color:White SMT package Suitable for all SMT assembly and soldering method Pb-free Reflow soldering application RoHS Compliant Features: Light
More informationDATA SHEET LOW OHMIC HIGH POWER CHIP RESISTORS RL-High power series 5%, 2%, 1% sizes 0805/1206
DATA SHEET LOW OHMIC HIGH POWER CHIP RESISTORS series 5%, 2%, 1% sizes 005/1206 RoHS compliant Product specification Aug 27, 200 V.2 Product specification 2 SCOPE This specification describes RL005/1206
More information553-xxxx. 3mm LED CBI Circuit Board Indicator Bi-level. 5 5 3 x x x x 0 1 0 ATTENTION
3mm LED CBI Circuit Board Indicator Bi-level 553-xxxx 9.65 [.380] 5.08 [.200] 3.68 [.145] RECOMMENDED P.C. BOARD LAYOUT.254 4.32 [.170] ID Red/Yel Cathode for Bicolor 2.6 [.102] 8.13 [.320] 4.44 [.175].508
More informationMetal Film Resistors, Military, MIL-R-10509 Qualified, Type RN and MIL-PRF-22684 Qualified, Type RL
CMF (Military RN and RL) Metal Film Resistors, Military, Qualified, Type RN and Qualified, Type RL FEATURES Very low noise (- 40 db) Very low voltage coefficient (5 ppm/v) Controlled temperature coefficient
More informationUltra Precision Metal Film Leaded Resistors
Ultra Precision Metal Film Leaded Resistors FEATURES Exceptional low TCR: ± 2 ppm/k to ± 10 ppm/k Super tight tolerance: ± 0.01 % to ± 0.25 % Exceptional overall stability: class 0.02 Wide resistance range:
More informationThick Film Resistor Networks, Dual-In-Line, Molded DIP
Thick Film Resistor Networks, Dual-In-Line, Molded DIP FEATURES Isolated, bussed, and dual terminator schematics available 0.160" (4.06 mm) maximum seated height and rugged, molded case construction Thick
More informationUser s Manual Before using the inverter, you need to read and save the safety instructions.
User s Manual Before using the inverter, you need to read and save the safety instructions. STI SERIES (STI200, STI300, STI500, STI700, STI1000) Power Frequency Pure Sine Wave Inverter The information
More informationPreliminary. 5mm Round White LED T-1 3/4 Technical Data Sheet. Model :LL-504WC2E-W2
Preliminary 5mm Round White LED T-1 3/4 Technical Data Sheet Model :LL-504WC2E-W2 Spec No: ITO-ET00N Rev No:V.1 Date: Dec/05/2004 Page: 1 OF 10 Features Popular T-1 3/4 diameter package. Choice of various
More informationSPECIFICATIONS FOR APPROVAL
CUSTOMER :. DATE : 2010. 12. 16. SPECIFICATIONS FOR APPROVAL PRODUCT NAME : Top View Type White SMD LED MODEL NAME : LEMWS59T80LZ00 APPROVAL REMARK APPENDIX Designed Checked Approved LG Innotek Co., Ltd.
More information50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High power to size ratio Non inductive element Material
More informationPulse Proof Thick Film Chip Resistors
Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationSURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) Rotor. Wiper. Cover. Pin S T - 2 T A 1 0 0 Ω ( 1 0 1 )
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) COPAL ELECTRONICS RoHS compliant INTERNAL STRUCTURE 8 4 7! 5! 9 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7
More informationHL-A-3528H308W-S1-13. Description. Applications. Recommended Soldering. Package Dimensions
RoHS Specification Client Name: Client P/N: Factory P/N: HL-A-3528H308W-S1-13 OF-SMD3528WN Sending Date: Client approval Hong li approval Approval Audit Confirmation Approval Audit Confirmation 殷 小 平 王
More informationMetal Film Resistors, Military, MIL-R-10509 Qualified, Precision, Type RN and MIL-PRF-22684 Qualified, Type RL
Metal Film Resistors, Military, Qualified, Precision, Type RN and Qualified, Type RL FEATURES Very low noise (- 40 db) Very low voltage coefficient (5 ppm/v) Controlled temperature coefficient Flame retardant
More informationLuckylight. 60.20mm (2.4") 8 8 RGB color Dot Matrix LED Displays Technical Data Sheet. Model No.: KWM-50884XRGBB
6.2mm (2.4") RGB color Dot Matrix LED Displays Technical Data Sheet Model No.: KWM-54XRGBB Spec No: W23A/BRGB Rev No: V.2 Date:Sep//29 Page: OF 9 Features: 2.4inch (6.2mm) digit height. Excellent segment
More information650W Single Output Power Supply
AK-650 series Features : Universal AC input with active PFC Programmable output Voltage ( 0% ~ 05% ) Programmable output Current ( % ~ 05% ) High efficiency up to 9% + / 0.5A auxiliary output Intelligent
More informationST-2 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) FEATURES PART NUMBER DESIGNATION S T - 2 T A 1 0 0 Ω ( 1 0 1 ) RoHS compliant
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) ST- RoHS compliant INTERNAL STRUCTURE 8 4 7 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7 8 9!! 5 Part name Housing
More informationTYPICAL APPLICATION CIRCUIT. ORDER INFORMATION SOP-EP 8 pin A703EFT (Lead Free) A703EGT (Green)
www.addmtek.com 2 CHANNELS 150mA HIGH VOLTAGE ADJUSTABLE CURRENT REGULATOR DESCRIPTION A703 is a high voltage, adjustable constant current driver for LED applications. Two regulated current ports are designed
More informationSM712 Series 600W Asymmetrical TVS Diode Array
SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to from damage due to
More informationSpecification MBT801-S
Specification MBT801S Drawn SSC Approval 고객명 Approval.com MBT801S 1. Features 2. Absolute Maximum Ratings 3. Electro Characteristics 4. Optical characteristics 5. Outline Dimension 6. Packing 7. Soldering
More informationKSC Series Sealed Tact Switch for SMT
KSC Series Features/enefits Positive tactile feeling J or G terminations Various heights IP67 Typical Applications Automotive Cellular phones Industrial electronics Network infrastructure and IT Elevator
More informationSUNON SPECIFICATION FOR APPROVAL DESCRIPTION : DC BRUSHLESS FAN. DIMENSIONS : 60X60X15 mm M O D E L : KD0506PHS2
SPECIFICATION FOR APPROVAL CUSTOMER : DESCRIPTION : DC BRUSHLESS FAN DIMENSIONS : 60X60X15 mm M O D E L : KD0506PHS2 APPROVED NO : APPROVED BY : (AUTHORIZED) SPEC.NO D600023 ISSUE DATE 08.06.1998 DAWN.
More informationESCC 4001/026 Qualified ( ) High Stability Thick Film Resistor Chips
ESCC 4001/026 Qualified ( ) High Stability Thick Film Resistor Chips thick film chip resistors are specially designed to meet the requirements of the ESA 4001/026 specification. They have undergone the
More information3704-0147 Lithichrome Stone Paint- LT Blue Gallon 3704-0001 Lithichrome Stone Paint- Blue 2 oz 3704-0055 Lithichrome Stone Paint- Blue 6 oz 3704-0082
Lithichrome Colors Item Number Item Description 120-COL Lithichrome Stone Paint - Any Size or Color 3704-0011 Lithichrome Stone Paint- LT Blue 2 oz 3704-0066 Lithichrome Stone Paint- LT Blue 6 oz 3704-0093
More informationEVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Power LED 1W (Preliminary)
Technical Data Sheet High Power LED 1W (Preliminary) Features Feature of the device: small package with high efficiency Typical view angle: 150. Typical light flux output: 30 lm @ 350mA. ESD protection.
More informationSD Memory Card Connectors
SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion
More informationElectronics and Soldering Notes
Electronics and Soldering Notes The Tools You ll Need While there are literally one hundred tools for soldering, testing, and fixing electronic circuits, you only need a few to make robot. These tools
More informationHarvatek Surface Mount CHIP LED Data Sheet HT-380FCH-ZZZZ
Harvatek Surface Mount CHIP LED Data Sheet Official Product HT Part No. Customer Part No. Data Sheet No. Tentative Product **************** **************** May. 14, 2007 Version of 1.1 Page 1/15 DISCLAIMER...
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES
More informationNo. 3, Gongye E. 3rd Road, Hsinchu Science Park, Hsinchu 30075, Taiwan TEL:886-3-565-8800. Lextar.com 50W-100W COB LED. Updated on 2012/010/11
Lextar.com 50W-100W COB LED Updated on 2012/010/11 Approval Sheet 50W COB LED Product Specification Product COB Part Number PB50H01 Customer Issue Date 2012/10 Feature LED COB Dice Technology : InGaN High
More information