4x SPX multi effectors

Transcription

1 Outline 02R96VCM Mixing channels 56 GROUP 8 AUX 8 MAIN Stereo Mixing capability Input channel functions Gate, Attenuator, 4-band PEQ, 2x Compressor, Delay, Pan Output channel functions Attenuator, 4-band PEQ, Compressor, Delay On-board processors 4x SPX multi effectors Mic inputs 16 Phantom power +48V DC; ON/OFF per channel Line inputs 4x Stereo, 2x 2tr in AD converter 24-bit; 128-time over sampling Stereo output, Studio monitor output, C-R monitor output, Line outputs I/O 8x Omni output DA converter 24-bit; 128-time over sampling Digital I/O 3x 2tr in/out, Cascade I/O Expansion slots 4x Mini-YGDAI (16-in/16-out) To Host(USB/Serial), Control(GPI), MIDI, Time code in Control and others (SMPTE/MTC), Word clock I/O General specifications 02R96VCM Internal processing 32bit, Accumulator: 58bit Sampling Internal 44.1 khz, 48 khz, 88.2 khz, 96 khz frequency rate External 44.1kHz/88.2kHz (-10%) - 48kHz/96kHz (+6%) Signal delay Less than 2.0ms (@48kHz), Less than 1.1ms (@96kHz) Total harmonic distortion Less than 0.05% (20Hz-40kHz) Frequency response 0, +0.5, -1.5dB 20Hz-40kHz Dynamic range DA: 110dB; AD+DA: 105dB Hum & noise level Equivalent input noise -128dBu Residual output noise -92dBu Crosstalk -80dB Power requirements AC100V, 120V, V 50/60 Hz Power consumption 200W W 667mm; 26-1/4in Dimensions H 239mm; 9-7/16in D 697mm; 27-7/16in Net weight 34kg; 75lbs

2 Library Accessories Effect libraries factory presets 52(EFFECT3-4 :44) (EFFECT1-4) user libraries 76 Compressor libraries factory presets 36 user libraries 92 Gate libraries factory presets 4 user libraries 124 EQ libraries factory presets 40 user libraries 160 Channel libraries factory presets 2 user libraries 127 Surround Monitor libraries Input patch libraries Output patch libraries Bus to stereo libraries Analog output characteristics Output terminal STEREO OUT(L,R) STUDIO MONITOR OUT(L,R) C-R MONITOR OUT(L,R) OMNI OUT 1-8 INSERT OUT 1-16 Actual source impedance 600ohms 75ohms 150ohms 150ohms 150ohms 600ohms Owner s Manual, Studio Manager Installation Guide, AC power cord Analog output characteristics For use with nominal 600kohm 600kohm GAIN SW * Output level Max. Nominal before clip - -10dBV +4dBV Connector (Unbalanced) XLR3-32 type +18dB +4dB +18dB (default) +4dBV -10dBV +4dBV Phone jack (Unbalanced)

3 8ohm - 4mW 25mW ST phone jack PHONES 100ohms 40ohm - 12mW 75mW (Unbalanced) * +18dB, +4dBV selectable (Internal SW) 0dBV=.00 Vrms. 0dB=0.775 Vrms. Analog input characteristics Input terminal CH INPUT A/B 1-16 CH INPUT PAD GAIN Actual load impedance Analog input characteristics For use with nominal Input level Sensitivity Nominal Max. before clip Connector -60dB -70dB -60dB -46dB A:XLR ohms 3kohms Mics & -26dB -16dB -2dB type -16dB B:TRS phone ohm 0dB +10dB +24dB jack -34dB -44dB -34dB -20dB 4kohms 600ohm +10dB 0dB +10dB +24dB CH INSERT IN 1-16 s 600ohm -6dB +4dB +18dB 2TR IN s 600ohm +4dB +4dB +18dB ANALOG1(L,R) 2TR IN s 600ohm -10dBV -10dBV +4dBV ANALOG2(L,R) (Unbalanced) * 0dB=0.775 Vrms * 0dBV=1.00 Vrms. * +48V DC(phantom power) is supplied to CH INPUT(1-24) XLR type connector via each individual switch. Digital input characteristics Digital input characteristics Terminal Format Data length Level Connector 1 AES/EBU 24bit RS422 XLR3-31 type 0.5Vpp/75ohm 2 IEC bit 2TR IN DIGITAL s 0.5Vpp/75ohm 3 IEC bit s D-sub Half Pitch Connector 68P CASCADE IN - - RS422 (female)

4 Digital output characteristics 2TR OUT DIGITAL Terminal 1 Format AES/EBU (Professional use) 2 IEC (Consumer Use) 24bit 3 IEC (Consumer Use) 24bit Digital output characteristics Data length Level Connector 24bit RS422 XLR3-31 type 0.5Vpp/75oh ms 0.5Vpp/75oh ms CASCADE OUT - - RS422 Effects Reverbs D-sub Half Pitch Connector 68P (female) 01 Reverb Hall REVERB HALL Concert hall reverberation simulation with gate 02 Reverb Room REVERB ROOM Room reverberation simulation with gate 03 Reverb Stage REVERB STAGE Reverb designed for vocals, with gate 04 Reverb Plate REVERB PLATE Plate reverb simulation with gate 05 Early Ref. EARLY REF. Early reflections without the subsequent reverb 06 Gate Reverb GATE REVERB Gated early reflections 07 Reverse Gate REVERSE GATE Gated reverse early reflections Delays 08 Mono Delay MONO DELAY Simple mono delay 09 Stereo Delay STEREO DELAY Simple stereo delay 10 Mod.Delay MOD.DELAY Simple repeat delay with modulation 11 Delay LCR DELAY LCR 3-tap (left, center, right) delay 12 Echo ECHO Stereo delay with crossed left/right feedback Modulation-based Effects No. Preset Name Type Description 13 Chorus CHORUS Chorus 14 Flange FLANGE Flanger 15 Symphonic Original Yamaha effect that produces a richer and more complex SYMPHONIC modulation than normal chorus 16 Phaser PHASER 16-stage stereo phase shifter

5 17 Auto Pan AUTO PAN Auto-panner 18 Tremolo TREMOLO Tremolo 19 HQ. Pitch HQ.PITCH Mono pitch shifter, producing stable results 20 Dual Pitch DUAL PITCH Stereo pitch shifter 21 Rotary ROTARY Rotary speaker simulation 22 Ring Mod. RING MOD. Ring modulator 23 Mod.Filter MOD.FILTER Modulated filter Guitar Effects 24 Distortion DISTORTION Distortion 25 Amp Simulate AMP SIMULATE Guitar amp simulation Dynamic Effects 26 Dyna.Filter DYNA.FILTER Dynamically controlled filter 27 Dyna.Flange DYNA.FLANGE Dynamically controlled flanger 28 Dyna.Phaser DYNA.PHASER Dynamically controlled phase shifter Combination Effects 29 Rev+Chorus REV+CHORUS Reverb and chorus in parallel 30 Rev->Chorus REV->CHORUS Reverb and chorus in series 31 Rev+Flange REV+FLANGE Reverb and flanger in parallel 32 Rev->Flange REV->FLANGE Reverb and flanger in series 33 Rev+Sympho. REV+SYMPHO. Reverb and symphonic in parallel 34 Rev->Sympho. REV->SYMPHO. Reverb and symphonic in series 35 Rev->Pan REV->PAN Reverb and auto-pan in series 36 Delay+Er. DELAY+ER. Delay and early reflections in parallel 37 Delay->Er. DELAY->ER. Delay and early reflections in series 38 Delay+Rev DELAY+REV Delay and reverb in parallel 39 Delay->Rev DELAY->REV Delay and reverb in series 40 Dist->Delay DIST->DELAY Distortion and delay in series Others 41 Multi.Filter MULTI.FILTER 3-band parallel filter (24 db/octave) 42 Freeze FREEZE Simple sampler 43 Stereo Reverb ST REVERB Stereo reverb 44 * 1 Reverb 5.1 REVERB 5.1 * 2 6-channel reverb for 5.1 surround 45 * 1 Octa Reverb OCTA REVERB * 2 8-channel reverb for 7.1 surround

6 46 * 1 Auto Pan 5.1. AUTO PAN channel auto pan for 5.1 surround 47 * 1 Chorus 5.1 CHORUS channel chorus for 5.1 surround 48 * 1 Flange 5.1 FLANGE channel flanger for 5.1 surround 49 * 1 Sympho. 5.1 SYMPHO channel symphonic effect for 5.1 surround 50 M.Band Dyna. M.BAND DYNA. Multi-band dynamics processor 51 * 1 Comp 5.1 COMP 5.1 * 2 Multi-band compressor for 5.1 surround 52 * 1 Compand 5.1 COMPAND 5.1 * 2 Multi-band compressor for 5.1 surround 53 * 3 Comp * 3 Comp276S 55 * 3 Comp * 3 Comp260S 57 * 3 Equalizer * 3 OpenDeck 59 * 3 REV-X Hall 60 * 3 REV-X Room 61 * 3 REV-X Plate *1 These effects can be recalled only to Effects processors #1. *2 Since these effects types require four DSPs, the total number of effects processors is reduced by three when one of these types is used. For example, if REVERB 5.1 is used with effects processor #1, processors 2-4 are unavailable. *3 Preset numbers are reserved for Add-On Effects. Effects that are not installed appear in gray and are unavailable for use.