MT851. Kids Locator GPS. User Manual

Transcription

1 MT851 Kids Locator GPS EN User Manual

2 Introduction Thank you for buying MT851 Kids Locator GPS. Device requires a micro- SIM card with active GPRS connection and enabled caller ID service and disabled PIN verification. Position can be designated from GPS, BTS and WiFi network. In order to use and control device please install free application SeTracker. Note! Please deactivate voice mail service for telephone numbers defined by user as SOS numbers otherwise child may connect with voice mail of the first number on the list. Overview speaker USB socket microsim card slot Button 1 SOS (button 2) Button 3 2 microphone

3 First steps Make sure that device is powered off, install microsim card as shown below. Now use USB cable and plug USB charger or other DC 5V power source (for i.e. USB port in PC computer). When charging is in progress battery icon will animate, when battery is full animation stops. Note! Watch is not a waterproof device, it should be removed from wrist before washing hands. Note! Device is equipped with built-in battery, charge it at least once a week in order to keep battery in good condition 3

4 Screen display GSM, GPS, battery Love heart, voice information Time, date Remove watch symbol Steps (shown weeks when APP turn off) Power on/off Press and hold SOS button for about 2 seconds to power on the device. To power off you need to send command from smartphone (remote shutdown function). Note! If microsim card is not installed in the device you can power off by holding SOS button for 3 seconds. Using the device Resuming home screen Press any button to resume screen. Press SOS button to resume home screen. Screen will be off automatically after few seconds. 4

5 Using watch phonebook When home screen is resumed press button 1 to enter watch phonebook, then use button 1 and button 3 to select contact, hold for 4 seconds button 1 to dial, press SOS button to end call. Sending voice message to parent When home screen is resumed press and hold button 3 to register voice message when you are finished release button, voice message will be delivered immediately. Calling parent 1 When home screen is resumed press and hold for about 4 seconds button 1 to dial SOS number 1. Press SOS button to end call. SOS function When home screen is resumed press and hold SOS button for about 7 seconds to enable SOS command device will dial SOS numbers one by one until it will connect successfully (it will dial these numbers in two rounds). Volume control During voice call use button 1 and button 3 to control volume. 5

6 SeTracker application Use GooglePlay store and download SeTracker free application (use AppStore for ios platform). At first run you will need to register new account in application, you will also need to enter device ID (you can find it at the bottom of the device or on the package). Note that device can be assigned to only one account so if second parent want to use this application you only need to login using the same login name and password. Example: Two parents, two kids. Create one account using first watch to register, then run application and add second watch. Both parents should use same login and password. 6

7 Select menu language and area accordingly. Click register. Note! Screen above is for reference only. License: scan barcode on the device or enter device ID manually. Account: parent name or enter parent telephone number/ address. Nickname: enter child name P_number: enter telephone number where lost password can be send. Password: enter password R_password: repeat password Tab MY If you want to end application and logout click Exit. If you want to edit account details click Personal Data, to manage monitored devices (add, modify or delete) click Device list. 7

8 Tab HOME 8 Chat You can send voice message to your child (up to 15sec long) or send text message (up to 15 chars). On the left are messages from child, on the right are your messages, click on the item to playback. When message is received by watch it will ring once and microphone icon will be on the screen. To playback this message press button 3 on the watch. When text messages is received it will ring once and show message on the entire screen. Health You can enable monitoring parameters like calories spent, steps taken, distance travelled or turnovers in sleep. If you want to monitor turnovers in sleep, please deactivate steps monitor.

9 Footprint You can playback position changes overlayed on the Google map. Geofence You can set geographical fence, when child will go outside defined radius you will be prompted. Message You can view application history log. Alarm You can set three different alarms for the watch. Device If child has lost watch you can manually trigger ring alert in order to help find the watch. Rewards You can send heart icon to reward your child for good behavior. Map Here you can check position of watch, actual battery level, and way of localization (red is for GPS, green is for WiFi network, blue is for GSM). To refresh position click locate, watch will receive command to send back its position immediately. 9

10 Settings SOS Number Enter up to three numbers that will be used by SOS function. Remember to deactivate voice mail for these numbers. Monitoring Enter number and click OK watch will call back in silent mode (speaker watch is disabled). Work Mode Define positioning frequency Normal mode every 10min position is retrived. Power save mode every 60min position is retrived. Follow: every minute position is retrived. Do Not Disturb Define time when child can not make calls using watch phonebook and can not receive incoming calls. SOS function still works, also sending messages is working. SMS Alerts Guardian Number: enter telephone number of person that is looking after your child. This number can receive alert when battery is low, when child use SOS function or when watch is removed from wrist. If you do not have such person enter telephone number of parent 1 or parent 2. 10

11 Contacts Telephone number list of allowed incoming calls. You can enter for example teacher s number then teacher can call child but child can not call teacher. Note! By default SOS Numbers and watch built-in phonebook numbers are allowed to call the watch Telephone Here you can edit watch built-in phonebook. You can store up to 10 contacts. Language and Time Zone Select menu language, time zone, and summer time. Push switch Enable/disable alert when watch is removed from wrist. Watch must be worn on the wrist for 3 minutes at least to activate the sensor. Alert notification is send to application. LBS Enable/disable localization using GSM network. Remote Shut Down Send command to power off the watch. Restore the default work mode It will restore work mode to normal mode (positioning every 10min). 11

12 Troubleshooting Q: Watch does not respond for commands. A: Check watch, if you see no connection icon as shown below, change your location like go outside the building and check again if this icon disappears watch should respond, use smartphone application and click map/locate to retrieve actual position of watch. Problem with server connection Due to continuous development specification and appearance of product are subject to change without prior notice. For technical support please visit 12