Rectangular (RPS) Square (SPS) Step Cut (SCP) Material SCP - Step Cut CI - Cast Iron
|
|
- Jason Norman
- 7 years ago
- Views:
Transcription
1 Ring Materials: Temp. Range 15% Glass filled PTFE -268 to % ronze filled PTFE -268 to % Glass Reinforced Nylon -240 to % Graphite Filled PTFE -72 to % Glass, 5% Moly Filled PTFE -72 to % arbon Graphite Filled PTFE -268 to 288 Materials: Nitrile -40 to 120 Viton /Fluorocarbon -26 to 204 Rectangular (RPS) Square (SPS) Step ut (SP) T* 2 Piece Q Seal ast Iron (I) *aterpillar equivalent style Product Description: Piston rings are excellent for sealing in hydraulic and pneumatic cylinder applications. The piston ring provides an excellent low friction and strong chemical resistance. y changing the components materials we can change the temperature range, frictional characteristics, extrusion resistance and wearability of the piston seal. s: - - RPS - Rectangular SPS - Square Q - Q Seal - T* Material SP - Step ut I - ast Iron Example: SPS % glass filled PTFE Square Piston Seal with a -153 Nitrile O-ring. Width venue NW
2 Rectangular Standard material: ronze filled PTFE ring with a Nitrile loader. RPS Style - used in medium duty applications. ore Diameter / Groove Dimensions Width Depth Ring Dimensions Width /S RPS RPS RPS RPS RPS RPS RPS RPS RPS RPS RPS RPS RPS RPS RPS RPS RPS RPS RPS RPS RPS RPS RPS RPS RPS RPS RPS RPS RPS RPS RPS Dash No. information is available in the O-ring section, which starts on page venue NW 93
3 Square Standard material: 15% glass filled PTFE ring with a Nitrile loader. SPS Style - used in light duty applications. D Groove Dimensions Ring Dimensions D ore Diameter ± information is available in the O-ring section, which starts on page 1. ± 0.5% /S ± Dash No. SPS * -009 SPS * -013 SPS * -017 SPS * -022 SPS * -025 SPS SPS SPS SPS SPS SPS SPS SPS SPS SPS SPS SPS SPS SPS SPS SPS SPS SPS SPS SPS SPS SPS venue NW
4 Square D ore Diameter ± Groove Dimensions Ring Dimensions ± 0.5% /S ± Dash No. SPS SPS SPS SPS SPS SPS SPS SPS SPS SPS SPS SPS SPS SPS SPS SPS SPS SPS SPS information is available in the O-ring section, which starts on page venue NW 95
5 Step ut /S SP - Width Standard Material: 40% glass reinforced Nylon ring and a 90 Durometer Peroxide cured oval Nitrile O-ring. SP Style - an withstand much higher pressure than RPS and SPS designs. The SP style also provides easier installation because of the split profile. dditional sizes and dimensional information is available through a Hi-Tech Seals sales representative. Nominal Dimensions /S Groove Dimensions Depth Width SP / SP /4 9/ SP /2 9/ SP /2 5/ SP /4 9/ SP / SP / SP /4 9/ SP /2 9/ SP /2 5/ SP /4 9/ SP / SP / SP /4 9/ SP /2 9/ SP /2 5/ SP /2 3/ SP / SP / SP /4 3/ SP /2 3/ SP / SP /2 3/ SP / SP /2 3/ SP / SP /2 3/ SP / SP /2 3/ SP / SP / venue NW
6 T T Height Length T J T J T J T J T J T J T J T J T J T - Hi-Tech Seals aterpillar parts are not original equipment parts. aterpillar part numbers are only provided as a reference venue NW 97
7 Q Seals E W L R Standard Material: 40% bronze filled PTFE with two Nitrile quad O-rings. I.D. Q Seal - commonly used in piston accumulators and medium duty hydraulic cylinders * Gland Seal Dimensions Dash No. Gland Dimensions /S ± Height (xial) I.D. I.D. xial Height (W) Radial Height (L) Radius (R) (E) Diametrical learance** Q / Q / / Q / / Q / / Q / Q / / Q / Q / / Q / Q / / Q / Q / / Q / Q / / Q / Q / / Q / Q / / Q / The above chart represents our standard sizes. ustom sizes are available upon request. For pressures exceeding 3000 PSI consult a Hi-Tech Seals sales representative PSI 3000 PSI venue NW
8 E W ast Iron D R W D R E Seal Width Seal /S Split Gap Groove Width Min. Groove Groove Root Min. Max. Min. Max. Min. Max. Min. Max. Depth Radius Seal Max. Extrusion Gap I I I I I I I I I I I I I I I I I I I I I I I I venue NW 99
9 ast Iron W D R E Seal Width Seal /S Split Gap Groove Width Min. Groove Groove Root Min. Max. Min. Max. Min. Max. Min. Max. Depth Radius Seal Max. Extrusion Gap I I I I I I I I I I I I I I I I I I I I I I I I I I venue NW
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
More informationClaronPolyseal. Table 1 shows the properties for each type of bearing. Values shown as low/high should be interpreted as relative to each other.
Claron produce four main types of polymer bearings for use in hydraulic cylinder applications. Each has a varying set of properties to cover a wide range of applications. The following tables are designed
More informationHOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
More informationIndustrial Piston and Rod T-Seals. ISO 9001 Certified Catalog PPD-3001A/USA
Industrial Pisn and Rod T-Seals ISO 9001 Certified Catalog PPD-3001A/USA Industrial Pisn and Rod T-Seals! WARNING: Failure, improper selection or improper use of the products and/or systems described herein
More informationMERKEL OMEGAT OMK-MR Piston Seal
Página 1 de 5 PI DISOGRIN Asymmetrical Piston U-Cup Piston series U-cup with asymmetric profile of the sealing lips, chamfered sealing edges. Knife cut static and dynamic lips for maximum sealing force
More informationBaumann 24003 3 Way Bronze or Stainless Steel Control Valve
Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control
More informationHow To Make A Seal
Inspection Rapid Prototyping Production ISO 9001 REGISTERED QMS ISD Table of Contents Introduction 3 Rapid Seal 3 Quality Control 3 Engineering & Drafting 3 Capabilities 3 Materials & Suppliers 4 Seal
More informationGaskets & seals solutions TENAX. Rubber fabric products. Vee packings Chevron sets Collars for rods & pistons
Rubber fabric products Gaskets & seals solutions ENAX Vee packings Chevron sets Collars for rods & pistons 100 YEAR 1911-2011 Gaskets and eals in enax rubber fabric Our gaskets in cotton-fabric ENAX do
More informationThese features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
More informationSection 4: NiResist Iron
Section 4: NiResist Iron Section 4 Ni-Resist Description of Grades...4-2 201 (Type 1) Ni-Resist...4-3 202 (Type 2) Ni-Resist...4-6 Stock Listings...4-8 4-1 Ni-Resist Description of Grades Ni-Resist Dura-Bar
More informationMetal-O-rings and C-rings for extreme operating conditions
Metal-O-rings and C-rings for extreme operating conditions From ultrahigh vacuum up to 6800 bar (100000 psi) pressure and temperatures from -269 C cryogenic up to +980 C (-425 F up to 1800 F). Resistant
More informationTIRE & TUBE SECTION DEFINITIONS: OVERALL WIDTH SECTION HEIGHT (D) OVERALL DIAMETER (A) SECTION WIDTH (B) NOMINAL RIM DIAMETER (C)
TIRE & TUBE SECTION Knowing some basic facts about tire dimensions and sizes along with a few technical aspects of tire construction can help clear up much of the confusion many people have in understanding
More informationTwo most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
More informationASTM D 2000 - M 5BG 407 A14 B14 E014 E034 F17
Understanding an ASTM D 2000 Call Out The ASTM D 2000 classification provides a system to standardize the properties of rubber materials. This classification was originally developed for use in the automotive
More informationQUAD-RING R Seal. Description... 2. Applications... 3. Materials... 4. Design Instructions... 6. Installation Instructions... 10
Contents Description... 2 Applications... 3 Materials... 4 Characteristics and inspection of elastomers... 4 Design Instructions... 6 Installation Instructions... 10 Installation Recommendations... 11
More informationRING TYPE JOINT GASKETS
RING TYPE JOINT GASKETS 05.07 GLOBAL RESOURCE FLEXITALLIC, A WORLDWIDE ORGANIZATION LOCAL SERVICE COMMITTED TO MEETING CUSTOMER NEEDS COMPREHENSIVE PRODUCT RANGE FOR ALL INDUSTRIAL AND PETROCHEMICAL APPLICATIONS
More information60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING
60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed
More informationGrooved gaskets. Types of gaskets
Types of gaskets have proven extremely useful in all areas of industry, including the most demanding sealing tasks. Our grooved gaskets can be found in conventional power plants as well as in the primary
More informationSITEMA PowerStroke. Technical Information TI-P12. 1 Function. 2 Applications. Mould Closing Devices series FSKP. Contents
SITEMA PowerStroke FSP ocking, actuating and releasing by pneumatic pressure English translation of German original Technical Information TI-P1 SITEMA PowerStroke Mould Closing Devices series FSP drive
More informationPizza! Pizza! Assessment
Pizza! Pizza! Assessment 1. A local pizza restaurant sends pizzas to the high school twelve to a carton. If the pizzas are one inch thick, what is the volume of the cylindrical shipping carton for the
More informationPerimeter, Area, and Volume
Perimeter, Area, and Volume Perimeter of Common Geometric Figures The perimeter of a geometric figure is defined as the distance around the outside of the figure. Perimeter is calculated by adding all
More informationCRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
More informationWorking Pressure - Hose Ends
Working Pressure - Hose Ends The maximum dynamic working pressure of a hose assembly is the lesser of the rated working pressure of the hose and the end connection used. HIGH SPECIALTY HOSE ACCESSORRIES
More informationDOUBLE GATE KNIFE GATE VALVE
DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or
More informationProduct catalogue. Gaskets, seals and o-rings
Product catalogue Gaskets, seals and o-rings Finland OyKLINGER Klinger Finland Oy is an import company in the technical trade sector. We help our customers increase their reliability by together developing
More informationSpiroflex spiral-wound gaskets
Spiral-wound gaskets have long been used as sealing elements in refineries, chemical plants, gas installations, water treatment plants and in general pipeline construction. Spiroflex gaskets SpV retain
More informationBUTTERFLY VALVES. An industry leader in underground and in-plant applications. STYLE 4500 3 24 STYLE 1450 30 54. Consult factory for sizes 60 120
An industry leader in underground and in-plant applications. BUTTERFLY VALVES STYLE 4500 3 24 STYLE 1450 30 54 Consult factory for sizes 60 120 C504 Class 150B & 250B M&H Valve is a division of McWane,
More informationSCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
More informationRoller bearing life. The Reaction of AISI 52100 Bearing Steel to Heat
Roller bearing life in high temperatures A common question maintenance personnel ask bearing companies when their equipment temperature is high or rises is, What is the maximum temperature that your rolling
More informationPTFE Seals Worldwide Made in Denmark
PTF Seals Worldwide Made in enmark of high quality PTF products materials experience, helping customers to make the right decision when specifying standard and non standard PTF seals and bearings. llways
More informationIndex 11.1. Page. Pumping Systems...11.2-11.4 Intensifiers...11.5 Gas Boosters...11.6-11.7 High Pressure Generators...11.8-11.9
Pumping Systems, Intensifiers, Gas Boosters and High Pressure Generators High Pressure Equipment Company produces a number of components and systems for general industrial, elevated pressure applications.
More informationBUTTERFLY VALVES. An industry leader in underground and in-plant applications. STYLE 4500 3 24 STYLE 1450 30 54. Consult factory for sizes 60 120
An industry leader in underground and in-plant applications. BUTTERFLY VALVES STYLE 4500 3 24 STYLE 1450 30 54 Consult factory for sizes 60 120 C504 Class 150B & 250B M&H Valve is a division of McWane,
More informationSurface Area Quick Review: CH 5
I hope you had an exceptional Christmas Break.. Now it's time to learn some more math!! :) Surface Area Quick Review: CH 5 Find the surface area of each of these shapes: 8 cm 12 cm 4cm 11 cm 7 cm Find
More informationBIÇAKLI VANALAR/ KNIFE VALVES
IÇKLI VNLR/ KNIF VLVS FG00 - Knife Gate Valve ORITL VLV SOLUTIONS Operations Handwheel, rising stem: Handwheel: hainwheel: Gear bo: lectric actuator: neumatic double acting: Hand lever: neumatic single
More informationPUMP AND MOTOR DIVISION
INSTALLATION MANUAL SERIES P2 and P3 MOBILE PISTON PUMP 1 Check model code / compare with your paper work Nameplate of the pump Ordering / Sales Acknowledgement 2 Check rotation of the pump Clockwise rotation
More informationPneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Application Tight-closing, double eccentric butterfly valve for process engineering and plants with industrial
More informationSKF Seals Knowledge Engineering. Designed to optimize machinery performance
SKF Seals Knowledge Engineering Designed to optimize machinery performance From moulding high quantities to mach Sealing for power transmission The performance and service life of a power transmission
More informationBALL VALVES TECHNICAL CATALOGUE
SITINDUSTRIE VALVO VALVES BALL VALVES Ed. 01/NOV-2004 SITINDUSTRIE reserves the right to change, without notice, 1/16 SITINDUSTRIE VALVE DIVISION We are pleased to introduce you to the ball valves manufactured
More informationVisual Index O-Rings and Seals
O-Rings and Seals N O-Ring Face Seal ORFS O-Ring N4 XO O-Ring N4 Port Ends SAE, Metric,, JIS, K4 SAE O-Ring N4 ISO 6149 O-Ring N5 Metric O-Ring Metric Retaining Ring O-Ring Retaining Ring EOlastic Seal
More informationORIFICE PLATES. CONCENTRIC BORE: For standard fluid conditions an Orifice Plate would have a centrally located orifice bore.
SUPERIOR PRODUCTS, INC. 20550 MADISON STREET, TORRANCE, CA 90503 ORIFICE PLATES MANUFACTURING STANDARDS: Superior Products manufactures Orifice Plates in strict accordance with the specifications of: AGA.,
More informationSQUARE D INDUSTRIAL CONTROL PRODUCTS
SQUARE D INDUSTRIAL CONTROL PRODUCTS CLASS 9012 3a INDUSTRIAL PRESSURE SWITCHES Type A Heavy duty switch for virtually any industrial application involving air, water, steam or oil Bellows, piston and
More informationThe Augustus Group Products Projects and Engineering Consulting. ASME BOILER AND PRESSURE VESSEL CODE Mike Looram
The Augustus Group Products Projects and Engineering Consulting ASME BOILER AND PRESSURE VESSEL CODE Mike Looram ASME B&PV CODE SECTION VIII DIV. 1 Bolted Flanges With Ring Type Gaskets Stress Calculations
More informationButt Fusion Welding of HDPE Pipes Work Procedure
Butt Fusion Welding of HDPE Pipes Work Procedure A pipeline is as good as its weakest point. Accordingly it is not only important that quality pipes and components are used in a piping system, but also
More informationMADE IN THE USA BALL VA LV ES
MADE IN THE USA BALL VA LV ES Ball Va l v e s INDEX [PRODUCTS] PRODUCT FAMILY PAGE Standard Bronze Ball Valves...3-4 Bronze Specialty Valves...4-5 Carbon Steel Threaded, Socket Weld & Butt Weld Valves...5-7
More informationRING JOINT SYSTEMS 207
RING JOINT SYSTEMS 07 08 Table of Contents Model R-88 Pages 10-11 Model R-88 Large Diameter Page 1 Model RH-1000 1000 PSI Coupling Page 13 Model RX-3000 3000 PSI Coupling Page 1 Model RX-3770 3770 PSI
More informationSchedule 40 & Schedule 80 Rigid PVC Piping Systems Scroll Down for Dimensions, Components, Hangars & Supports, Fabrication Techniques
Schedule 40 & Schedule 80 Rigid PVC Piping Systems Scroll Down for Dimensions, Components, Hangars & Supports, Fabrication Techniques Schedule 40 Rigid PVC Piping Systems SCHEDULE 40 - DIMENSIONS Harvel
More informationMerkel Seals and Sealing Systems for the Metal Processing Industry. Product Information Metal Processing Industry
Merkel Seals and Sealing Systems for the Metal Processing Industry Product Information Metal Processing Industry Simrit, Your Global Technology Specialist for Seals and Vibration Control Simrit, Your Global
More informationSMA Interface Mating Dimensions (Per MIL-STD-348)
SMA Series SMA 6 SMA Interface Mating Dimensions (Per MIL-STD-348) SMA Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.250 6.35.263 6.68.. B.1790 4.55.1808
More informationBULLETIN 70.00-1 OCTOBER 2012. DeZURIK ROTARY DIAPHRAGM ACTUATORS
BULLETIN 70.00-1 OCTOBER 2012 DeZURIK ROTARY DIAPHRAGM ACTUATORS 2 2012 DeZURIK, Inc. Design & Construction DeZURIK rotary diaphragm actuators are available for use on rotary control valves including:
More informationThe SF2 series are designed for reservoir side-wall mounting applications, suitable for flow rates to 850 l/min and filtration from 25 to 250 micron.
D e s c r i p t i o n 500 The SF2 series are designed for reservoir side-wall mounting applications, suitable for flow rates to 850 l/min and filtration from 25 to 250 micron. A major feature of these
More informationFILTRATION AMIAD PLASTIC FILTERS, SCREENS & DISCS
4 AMIAD PLASTIC FILTERS, SCREENS & DISCS Max pressure 10.0 Bar, max temperature 60 O 3/4 to 1 1/2 bodies manufactured from polyacetal 2 bodies and above manufactured from polymade and glass fibre 3/4 to
More informationAIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
More informationpvc well casing & drop pipe
CertainTeed pvc well casing & drop pipe PVC Well Products Sure Fit PVC well casing and drop pipe have gained broad acceptance since their introduction almost 40 years ago. Today, due to its outstanding
More informationQLM and QLD Series Three-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationHH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD BIMBA. company
HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD a BIMBA company The TRD difference... Precision machined throughout. We started in business as precision machinists. Every component is machined in a manner
More informationSMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering
More informationREVERSE DOMED BUCKLING DISCS, A PRESSURE RELIEF DEVICE, THEIR PERFORMANCE AND PROBLEMS. B. K. WATTON * G. W. BRODIE ** C. ENG. F.I. MECH.E.
REVERSE DOMED BUCKLING DISCS, A PRESSURE RELIEF DEVICE, THEIR PERFORMANCE AND PROBLEMS. B. K. WATTON * G. W. BRODIE ** C. ENG. F.I. MECH.E. A widely used method employed for the relief of overpressure
More information*Rated to 207 Bar/3000 PSI with Aluminum Body. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US
Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type...
More informationSome additional standards and specifications that directly or indirectly affect surface finish requirements include:
Surface Finish Charts Surface Finish Affects Performance The surface finish of process vessels, piping and related components can be a critical factor in their performance, maintenance costs, and service
More informationTECHNICAL SPECIFICATION
THOMAS - G-FLEX GFLEX TECH SPEC CONNECTING INNOVATION JOHANNESBURG TEL: +27 11 794 7594 CAPE TOWN TEL: +27 21 556 5258 POLOKWANE TEL: 015 298 9142 DESIGNER, MANUFACTURER AND DISTRIBUTOR OF PIPE CONNECTION,
More informationTECHICAL SPECIFICATION Conductive Elastomer Extruded Gaskets
Pag. 1/8 TECHICAL SPECIFICATION Conductive Elastomer Extruded Gaskets Electrically conductive silicone gaskets are manufactured in different standard profiles and upon client request, in silicone and fluorosilicone,
More informationPRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
More informationSpecification for Rotary Drill Stem Elements
Addendum 1 March 2007 Effective Date: September 1, 2007 Specification for Rotary Drill Stem Elements ANSI/API SPECIFICATION 7-1 FIRST EDITION, MARCH 2006 EFFECTIVE DATE: SEPTEMBER 2006 ISO 10424-1:2004
More informationVARIABLE DISPLACEMENT AXIAL PISTON PUMPS. For truck applications
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS For truck applications TVP FEATURES Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications. The compact
More information4 Posiflow Proportional Solenoid Valves
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
More informationFilling and Wrapping: Homework Examples from ACE
Filling and Wrapping: Homework Examples from ACE Investigation 1: Building Smart Boxes: Rectangular Prisms, ACE #3 Investigation 2: Polygonal Prisms, ACE #12 Investigation 3: Area and Circumference of
More informationInv 1 5. Draw 2 different shapes, each with an area of 15 square units and perimeter of 16 units.
Covering and Surrounding: Homework Examples from ACE Investigation 1: Questions 5, 8, 21 Investigation 2: Questions 6, 7, 11, 27 Investigation 3: Questions 6, 8, 11 Investigation 5: Questions 15, 26 ACE
More informationPRODUCT RELEASE CKMTA12 / 24. Copyright 2011 by ARB Corporation Limited
PRODUCT RELEASE CKMTA12 / 24 Copyright 2011 by ARB Corporation Limited ARB 4x4 ACCESSORIES 720 SW 34Th Street Tel: (425) 264-1391 Renton, Washington 98057 Fax: (425) 264-1392 USA North and South American
More informationSITEMA PowerStroke. Technical Information TI-P11. 1 Function. 2 Applications. Mould Closing Devices series FSK. Contents
English translation of German original Technical Information TI-P11 SITEMA PowerStroke Mould Closing Devices series FS drive system for powerful forces on a short stroke hydraulic actuation closing force
More information800-348-8467 www.fittingsunlimited.com
Thread and Port Identification Guide 800-348-8467 www.fittingsunlimited.com INDEX Index... 1 Explanation of Symbols... 2 How to Measure Threads... 3-4 Metric vs English Threads... 5 North American Connections
More informationPneumatic Grippers Parallel and Angular Grippers. Catalog 1900-2/US
Pneumatic Grippers Parallel and Angular Grippers Catalog 19-2/US Catalog 19-2/US OContents GPR Series Rotary vane driven design GPR GPCR Series P5G-HPM(C) Series P5G-HP Series GPT Series P5G-AP Series
More informationFast closing valve Series 75
Fast closing valve Series 75 Vacuum safety system for protection of storage rings or accelerators Detection of rise in milliseconds Leak tight closure in milliseconds Body material stainless steel Gate
More informationCEEN 162 - Geotechnical Engineering Laboratory Session 7 - Direct Shear and Unconfined Compression Tests
PURPOSE: The parameters of the shear strength relationship provide a means of evaluating the load carrying capacity of soils, stability of slopes, and pile capacity. The direct shear test is one of the
More informationIMPORTANT DOCUMENTATION DO NOT DISCARD!
PART NO.: 6441-263C SERIES GRT 3 JAW PARALLEL GRIPPERS INFORMATION SHEET IMPORTANT DOCUMENTATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance
More informationThe next revolution in Stock Shape Plastics has just arrived... Introducing HYDEX 4101L internally lubricated PBT.
HYDEX 4101 & HYDEX 4101L (Internally Lubricated) The next revolution in Stock Shape Plastics has just arrived... Introducing HYDEX 4101L internally lubricated PBT. HYDEX 4101 and 4101L A Family of Stock
More informationPacking and gaskets Page 029 of 040
Packing and gaskets Page 029 of 040 7.3 Packing and gaskets The chemical industry has carried out cadastral surveys for many years. These surveys provide valuable information regarding environmental pollution
More informationFRL/AirCare Air Controls & Accessories
FRL/irare ir ontrols & ccessories Lincoln Regulators, Filters & Lubricators well-planned compressed air system ensures minimum pressure loss in the system, and the removal of contaminants: water, compressor
More informationRotary actuators Rotary wing drives Series RAK. Brochure
Brochure 2 Rotary wing drives, angle of rotation: 30-270 Rotary wing drive, double-acting axis geometry: single 4 Rotary wing drives, angle of rotation: 90-270 Rotary wing drive, double-acting axis geometry:
More informationFlanged and Butt-= Weld Type
Document : PG00 Year : 09 Product Group 00 Flanged and Butt-= Weld Type (LNG and LPG) Page 09 Document : PG00 Year : 09 Product Group 00 Cryogenic Butterfly valves The Cryogenic Butterfly Valve Design
More informationTable of Contents. 3-5... Hastings Piston Rings. 6... Nomenclature. 7... Piston Ring Functions. 8... File Fit End Gap & Plastigage
Table of Contents 3-5... Hastings Piston Rings 6... Nomenclature 7... Piston Ring Functions 8... File Fit End Gap & Plastigage 9... Premium Ductile & Steel Rings by Diameter 19... Claimer Series by Diameter
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More informationType 3353 Angle Seat Valve
Type 3353 Angle Seat Valve Application On/off valve with pneumatic piston actuator Nominal size DN 15 to 50 (NPS ½ to 2) Nominal pressure PN Temperature range 10 to 180 C Globe valve with an angle seat
More informationSan Antonio Water System Standard Specifications for Construction ITEM NO. 1100 SLIP-LINING SANITARY SEWERS
ITEM NO. 1100 SLIP-LINING SANITARY SEWERS 1100.1 DESCRIPTION: This item shall consist of slip-lining sanitary sewer pipe, which is accomplished by pulling or pushing liner pipe into existing sewers by
More informationThe KLINGERexpert 5.2.1
KLINGERexpert 5.2.1 Powerful Sealing Calculation The KLINGERexpert 5.2.1 gasket design program is a versatile piece of software to assist users in the selection of non-metallic gasket materials. KLINGER
More informationCrankshaft Design Radial Piston Hydraulic Motors & Gearboxes
Crankshaft Design Radial Piston Hydraulic Motors & Gearboxes History SAI was founded in 1964 when the Pecorari family could not find a reliable low speed, high torque motor for their farm equipment. Frustrated
More informationPVC Pipe PVC SCHEDULE 40. Nominal Pipe Size (in.) 1/8. Average I.D. O.D.
CONDENSED CATALOG PVC HPB-0-A Effective 9//97 Revised //99 CLEAR / / / / -/ -/ -/ x/ CLEAR / / / / -/ PVC SDR. PSI (Water @ 7. F.) /.0.9.0.0 PVC SDR -/ -/ -/ 0 0 PVC SCHEDULE 0.0.7.0.00..7.7.00.000.00...
More informationRadial piston pumps type R and RG
Radial piston pumps type R and RG Operating pressure p max = 700 bar Delivery flow Q max = 91.2 lpm (at 1450 rpm) Geometric displacement V g max = 64.2 cm 3 /rev. 1. General Motor pumps and hydraulic power
More informationDSD 70 Dual Channel Hall Effect Speed Sensor for Railway Applications, compliant with EN 50155
DSD 70 Dual Channel Hall Effect Speed Sensor for Railway Applications, compliant with EN 50155 Technical information Version: 07.14 General Function The speed sensors family DSD.70 are suitable for generating
More informationS GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
More informationFLANGED END BALL VALVE
Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material
More informationEngineered seals in PTFE & high-performance plastics
Engineered seals in PTFE & high-performance plastics Issue 2 Seals & sealing systems from James Walker JaegerSeals igh performance products With full worldwide technical support igh Performance Sealing
More informationFlowtite Jacking Pipe
U.S. COMPOSITE PIPE SOUTH, LLC. MEMBER OF KTI PIPE GROUP OF COMPANIES Flowtite Jacking Pipe 18585 Samuels Rd. Zachary, La. 70791 PH. 225-658-6166 Fax 225-658-0947 www.flowtitepipe.com Flowtite GRP Pipe
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationMAXIMIZING THE OUTPUT OF YOUR BRAKES Getting Your Pedal Geometry Right
MATCO mfg 2361 S 1560 West Woods Cross, UT 84087 801-335-0582 801-335-0581 (F) www.matcomfg.com MAXIMIZING THE OUTPUT OF YOUR BRAKES Getting Your Pedal Geometry Right Brake Specifications Energy Rating
More informationSpecifications, Product Testing and Terminology
Specifications, Product Testing and Terminology The following synopsis provides a review of various material and final product testing, which is performed on our products, as well as, many of our competitors.
More informationTechnical Data. 7. Bearing Fits. 7.1 Interference. 7.2 Calculation of interference F B LLLLLLLLL( A-54
Technical Data 7. Bearing Fits 7.1 Interference For rolling s the rings are fixed on the or in the housing so that slip or movement does not occur between the mated surface during operation or under. This
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI 53072 U.S.A. Tel: 262-691-2222 FAX: 262-691-0312 E-mail: sales@dynexhydraulics.
SPECIFICATIONS PF1000 Series Fixed Displacement Pumps Also refer to "Checkball Pump Installation and Operating Recommendations" Bulletin PSI.CB (dynexpumpinstallation.pdf) CONTACT INFORMATION USA Headquarters
More informationBUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE
CATALOGUE 2012 - PART 2 WATER TREATMENT BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE DIAPHRAGM VALVES EN13397:2000 STRAIGHT- THROUGH BODY STYLE
More informationDrawn Cup Needle Roller Bearings
Drawn up Needle Roller Bearings NSK has introduced the most advanced bearing technology, offering unprecedented precision and reliability. Available in two types caged and full complement. High-quality
More informationAPI Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
More information