CTSC Canadian Thermal Solutions Corporation
|
|
- Susan Daniels
- 7 years ago
- Views:
Transcription
1 Company Information () is a Calgary based oil and gas products supplier focused on thermal recovery of hydrocarbons. has a global network of qualified suppliers to deliver solutions to customers for use their thermal applications. This would clude but is not limited to: vacuum sulated tubg and casg (VIT, VIC), high thermal efficiency tubg and casg (HTET, HTEC), ultra high strength sucker and polish rods, PCP application rods, portable steam generators and sand control screens. Through its global network, can also offer analysis of a particular sand control situation and offer competitive solutions based on this analysis. Sand Control Screen Utilizg Bridgg Aperture Technology The Bridgg Apertured Screen is comprised of a perforated concentric base pipe with layers of filter jacket material encased a side-punched apertures screen shroud, all attached to the base pipe with a supportg rg. The base pipe has a predetermed number of perforated holes. The outer shroud with grooved or arc bridges is one unit connected through the supportg rg to the concentric base pipe. The rg is attached to the base pipe with socket head cap screws, and the assembly is then welded to the base pipe to help prevent corrosion and potential shearg off at the weldg pot. The BAS is an excellent choice for those well environments with high concentrations of H2S, CO2 and CL. If 13Cr or other high alloy content base pipe is utilised, the system of both set screw and surface weldg ensures a higher strength at the weldg pot between base pipe and filter screen media. Advantages the advanced novative technology corporated the design provides a larger flow area compared with Slotted Screen, Punched Screen or Wire Wrapped Screen higher anti-pluggg and erosion-endurance capability compared to Slotted Screen and Punched Screen creased resistance to deformation and longer service life the punched aperture structures result a side flow path, and therefore protects the perforated base pipe from direct fluid erosion the combation of set screw connection along with surface weldg of the supportg rgs to the base pipe, helps protect the base pipe from damage the filter jacket is made from SS304 material and is acid, alkale and sale resistant; suitable for the most severe well conditions very resistant to extrusion deformation due to connection to the base pipe beg side the filter jacket; will prevent aperture from becomg enlarged the large open area of the screen provides a larger flow area with lower flow resistance, which assists with the anti-pluggg capability and creased oil/gas recovery the 90 aperture on both sides of the grooved bridge or arc bridge of the filter jacket helps to reduce possibility of pluggg
2 Bridgg Apertured Screen 1. the side-punched apertured filter jacket is made from SS304 material and is acid, alkale and sale resistant; suitable for the most severe well conditions 2. the 90 degree apertures on both sides of the grooved or arced bridge ensure high resistance to pluggg 3. the filter jacket is secured to the base pipe with a combation of set screws along with surface weldg 4. high density aperture, low flow restriction and large base pipe flow area is over 10 times higher than competitor products 5. easy field handg and RIH capability Technical Parameters Size OD ID Hole Density Basepipe Hole Dia. 2 7/8 3 1/ holes/ft 4 1/ Length 5 5 1/2 6 5/ Based on API Tubg and Casg standard or clients' requirements sales@cthermal.ca Web:
3 Company Information () is a Calgary based oil and gas products supplier focused on thermal recovery of hydrocarbons. has a global network of qualified suppliers to deliver solutions to customers for use their thermal applications. This would clude but is not limited to: vacuum sulated tubg and casg (VIT, VIC), high thermal efficiency tubg and casg (HTET, HTEC), ultra high strength sucker and polish rods, PCP application rods, portable steam generators and sand control screens. Through its global network, can also offer analysis of a particular sand control situation and offer competitive solutions based on this analysis. Sand Control Screen Utilizg Bridgg Aperture Technology The Bridgg Apertured Screen is comprised of a perforated concentric base pipe with layers of filter jacket material encased a side-punched apertures screen shroud, all attached to the base pipe with a supportg rg. The base pipe has a predetermed number of perforated holes. The outer shroud with grooved or arc bridges is one unit connected through the supportg rg to the concentric base pipe. The rg is attached to the base pipe with socket head cap screws, and the assembly is then welded to the base pipe to help prevent corrosion and potential shearg off at the weldg pot. The BAS is an excellent choice for those well environments with high concentrations of H2S, CO2 and CL. If 13Cr or other high alloy content base pipe is utilised, the system of both set screw and surface weldg ensures a higher strength at the weldg pot between base pipe and filter screen media. Advantages the advanced novative technology corporated the design provides a larger flow area compared with Slotted Screen, Punched Screen or Wire Wrapped Screen higher anti-pluggg and erosion-endurance capability compared to Slotted Screen and Punched Screen creased resistance to deformation and longer service life the punched aperture structures result a side flow path, and therefore protects the perforated base pipe from direct fluid erosion the combation of set screw connection along with surface weldg of the supportg rgs to the base pipe, helps protect the base pipe from damage the filter jacket is made from SS304 material and is acid, alkale and sale resistant; suitable for the most severe well conditions very resistant to extrusion deformation due to connection to the base pipe beg side the filter jacket; will prevent aperture from becomg enlarged the large open area of the screen provides a larger flow area with lower flow resistance, which assists with the anti-pluggg capability and creased oil/gas recovery the 90 aperture on both sides of the grooved bridge or arc bridge of the filter jacket helps to reduce possibility of pluggg
4 Bridgg Composite Screen 1. the side-punched apertured filter jacket is made from SS304 material and is acid, alkale and sale resistant; suitable for the most severe well conditions 2. the 90 degree apertures on both sides of the grooved or arced bridge reduce the possibility of pluggg 3. the filter jacket is secured to the base pipe with a combation of set screws along with surface weldg 4. the large flow area reduces the possibility of pluggg 5. the annulus between the filter jacket and the base pipe ensures high permeability of the full screen jot 6. the multiple layers of filter mesh are free to move an expansion or contraction mode; they are not subject to torque which may be experienced by the assembly durg stallation 7. easy field handg and RIH capability Technical Parameters Size 2 7/8 3 1/ / /2 6 5/ OD ID Hole Density holes/ft Basepipe Hole Dia Length Based on API Tubg and Casg standard or clients' requirements
5 Company Information () is a Calgary based oil and gas products supplier focused on thermal recovery of hydrocarbons. has a global network of qualified suppliers to deliver solutions to customers for use their thermal applications. This would clude but is not limited to: vacuum sulated tubg and casg (VIT, VIC), high thermal efficiency tubg and casg (HTET, HTEC), ultra high strength sucker and polish rods, PCP application rods, portable steam generators and sand control screens. Through its global network, can also offer analysis of a particular sand control situation and offer competitive solutions based on this analysis. Sand Control Screen Utilizg Bridgg Aperture Technology The Bridgg Apertured Screen is comprised of a perforated concentric base pipe with layers of filter jacket material encased a side-punched apertures screen shroud, all attached to the base pipe with a supportg rg. The base pipe has a predetermed number of perforated holes. The outer shroud with grooved or arc bridges is one unit connected through the supportg rg to the concentric base pipe. The rg is attached to the base pipe with socket head cap screws, and the assembly is then welded to the base pipe to help prevent corrosion and potential shearg off at the weldg pot. The BAS is an excellent choice for those well environments with high concentrations of H2S, CO2 and CL. If 13Cr or other high alloy content base pipe is utilised, the system of both set screw and surface weldg ensures a higher strength at the weldg pot between base pipe and filter screen media. Advantages the advanced novative technology corporated the design provides a larger flow area compared with Slotted Screen, Punched Screen or Wire Wrapped Screen higher anti-pluggg and erosion-endurance capability compared to Slotted Screen and Punched Screen creased resistance to deformation and longer service life the punched aperture structures result a side flow path, and therefore protects the perforated base pipe from direct fluid erosion the combation of set screw connection along with surface weldg of the supportg rgs to the base pipe, helps protect the base pipe from damage the filter jacket is made from SS304 material and is acid, alkale and sale resistant; suitable for the most severe well conditions very resistant to extrusion deformation due to connection to the base pipe beg side the filter jacket; will prevent aperture from becomg enlarged the large open area of the screen provides a larger flow area with lower flow resistance, which assists with the anti-pluggg capability and creased oil/gas recovery the 90 aperture on both sides of the grooved bridge or arc bridge of the filter jacket helps to reduce possibility of pluggg
6 Bridgg Composite 2008 Screen 1. the side-punched apertured filter jacket is made from SS304 material and is acid, alkale and sale resistant; suitable for the most severe well conditions 2. the 90 degree apertures on both sides of the grooved or arced bridge reduce the possibility of pluggg 3. the filter jacket is secured to the base pipe with a combation of set screws along with surface weldg 4. the bridgg structured ner shroud enhances flow draage by divertg the flow path; which prevents sand accumulation and screen pluggg 5. the multiple layers of filter mesh are free to move an expansion or contraction mode; they are not subject to torque which may be experienced by the assembly durg stallation 6. easy field handg and RIH capability Technical Parameters Size 2 7/8 3 1/ / /2 6 5/ OD ID Hole Density holes/ft Basepipe Hole Dia Length Based on API Tubg and Casg standard or clients' requirements
C O M P L E T I O N S E R V I C E S
Well Screens Well Screens Contents ProWeld TM ProWeld TM TOP DynoFlo TM DB UniFlo HELICAL Inflow Control Screen UniFlo TM ROI Inflow Control Screen SlimFlo TM Pre-packed CoilFlo TM DB Screen Communication
More informationGrounding and Bonding Against Static Electricity. Jon Koppari, CSP, MS Occupational Safety and Health Instructor OSHA Training Institute
Grounding and Bonding Against Static Electricity Jon Koppari, CSP, MS Occupational Safety and Health Instructor OSHA Training Institute Objectives Identify Sources of Ignition. Identify Hazards associated
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationIntroduction. The following is an outline of the contents of this paper: Definition of Artificial Lift Page 2. How an Oil Well is Produced Page 2
Introduction Canadian Oilwell Systems Company and it s subsidiaries are suppliers of oil well Electric Submersible Pumping systems (ESPs). Such pumps are used to lift oil from oil wells so that the oil
More informationGENERAL PROPERTIES //////////////////////////////////////////////////////
ALLOY 625 DATA SHEET //// Alloy 625 (UNS designation N06625) is a nickel-chromium-molybdenum alloy possessing excellent resistance to oxidation and corrosion over a broad range of corrosive conditions,
More informationNorth American Stainless
North American Stainless Long Products Stainless Steel Grade Sheet 2205 UNS S2205 EN 1.4462 2304 UNS S2304 EN 1.4362 INTRODUCTION Types 2205 and 2304 are duplex stainless steel grades with a microstructure,
More informationTECHNICAL SPECIFICATION
THOMAS - G-FLEX GFLEX TECH SPEC CONNECTING INNOVATION JOHANNESBURG TEL: +27 11 794 7594 CAPE TOWN TEL: +27 21 556 5258 POLOKWANE TEL: 015 298 9142 DESIGNER, MANUFACTURER AND DISTRIBUTOR OF PIPE CONNECTION,
More informationCat. No. Finishes & Materials. Standard Finish: Electrogalvanized. Change suffix to SS6(C).
Superstrut Support Systems 1-5/8 in. x 1-5/8 in. Channel and Hardware Superstrut 1-5/8 in. x 1-5/8 in. - 12 Gauge Channel Type A Solid Base Punched Description Solid base -P Punched -HS Half slots Half
More informationINDIAN STANDARDS (BIS) ON WELDING
** IS 82:957 Glossary of terms relating to welding and cutting of Sep 2008 metals 2 IS 83:986 Scheme of symbols for welding (revised) Sep 2008 3 IS 84:2004 Covered electrodes for manual metal arc welding
More informationVe-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
More information60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING
60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed
More informationTUBULAR Holing and Slotting Of Casing
TUBULAR Holing and Slotting Of Casing Holing and Slotting of Casing Introduction.................. 243-244 Slotting machines Hydraulic Handling System Holing Machines Deburring Pipe coating Banding QA
More informationDrill Pipe Hard-facing
Drill Pipe Hard-facing GLOBAL PROTECTION AGAINST WEAR AND TEAR Oxyacetylene Rods Flux- and Metal Cored Wires Electrodes PTA - Welding Oxyacetylene Welding and Spray Powders Flame Spraying FLSP Arc Spraying
More informationBUMAX. REYHER your partner for the BUMAX range
BUMAX high-tensile stainless steel fasteners REYHER your partner for the BUMAX range Strongest stainless steel fasteners in the world BUMAX 88 and BUMAX ready for delivery from stock Wide range of BUMAX
More informationApplication Guide. Compensators Hose Assemblies Expansion Joints FLEX-WELD INCORPORATED FLEX-WELD.COM. Manufactured By:
Compensators Hose Assemblies Expansion Joints Manufactured By: FLEX-WELD INCORPORATED FLEX-WELD.COM What we need to know... A. Physical / System Parameters 1 Size of Assembly: Measure Pipe size (ID) of
More informationTopSky DLG Installation Manual
TopSky DLG Installation Manual Attention: Because after the compound materials solidify, there will be ammonia iris on the surface, which affect the bonding strength afterwards. Please polish with sandpaper
More informationTIG torches... 3-2 to 3-5 Tungsten electrodes... 3-6 to 3-7 TIG consumables... 3-8 Miscellaneous... 3-9
3- welding torches........................................................... 3-2 to 3-5 Tungsten electrodes........................................ 3-6 to 3-7 consumables........................................................
More informationWear Resistant Coatings. Corrosion Protection
Wear Resistant Coatings Thermal Spray Technologies offers an almost endless variety of coating solutions to provide Wear Resistance. Wear mechanisms including erosion, abrasion, adhesion, cavitations,
More informationSelection and Determination of Tubing and Production Casing Sizes
CHAPTER 3 Selection and Determination of Tubing and Production Casing Sizes OUTLINE 3.1 Overview 3.2 Overview of Nodal Analysis 3.3 Selection and Determination of Tubing and Production Casing Sizes for
More informationMachine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
More informationStyle 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description
Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard
More informationSPECIFICATION Aluminum Module Frames. Allowed anodization before fabrication for clear frames.
SPECIFICATION Allowed anodization before fabrication for clear frames. Page 2 of 9 1. SCOPE 1.1. This document provides general requirements for aluminum frames used in the assembly of photovoltaic modules.
More informationMICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF SECTION
MICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF Nylon 6/6 meets MIL-M20693B "A" Type 1, LP410A, and ASTM D789-66 Type 1, GDE 2 All test performed per ASTM specifications. Parts
More informationwww.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 45 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT 1.0 SCOPE 2 2.0 CONFLICTS
More informationMounting Instructions for SP4 Power Modules
Mounting Instructions for SP4 Power Modules Pierre-Laurent Doumergue R&D Engineer Microsemi Power Module Products 26 rue de Campilleau 33 520 Bruges, France Introduction: This application note gives the
More informationCorrosion protection linings. Issue 1
Corrosion protection linings Issue 1 Introduction While Humes sewerage pipes and products are designed to serve over 100 years in accordance with AS/NZS 4058, we offer corrosion protection linings to increase
More informationErik Backström, High Voltage breakers, After Sales & Service High voltage SF 6 live tank circuit breakers After Sales & Service Training course
Erik Backström, High Voltage breakers, After Sales & Service High voltage SF 6 live tank circuit breakers After Sales & Service Training course description HPL 72,5-300 B1 with BLG1002A Level A & B Training
More informationTemposonics. Magnetostrictive, Absolute, Non-contact Linear-Position Sensor Accessories
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensor Accessories Includes Installation, Mounting and Application References Current Production and Retrofit Options for R-Series, G-Series
More informationSECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS
SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS PART 1 GENERAL 1.01 SECTION INCLUDES A. The requirements for pipe material and installation in sewer and drainage collection systems. All materials
More informationStilling Well Recommendations
White Paper June 24, 2009 Stilling Well Recommendations This document describes general requirements for stilling wells used for radar tank gauging applications. Automation solutions for oil & gas, defense
More informationHoist Rings. Sizes and Styles for all your Applications and Requirements. HR-125 The Original. SS-125 Stainless Steel. HR-1000 Heavy Lift
s and Styles for all your Applications and Requirements HR-125 The Origal HR-1000 Heavy Lift SS-125 Staless Steel HR-100 Pivot HR-125C Grade 8 Cha HR-125W Web HR-1200 Side Pull HR-500 Trench Cover English
More informationLenntech. 1000 psi End port pressure vessels 2.5. User s Guide to: Phoenix Vessel Technology Limited. Model number: 1503
1 User s Guide to: Phoenix Vessel Technology Limited 1000 psi End port pressure vessels 2.5. Model number: 1503 Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Phoenix
More informationUnsteady State Relief Valve Evaluation. External Pool Fire Scenario
Unsteady State Relief Valve Evaluation External Pool Fire Scenario By Rame Sulaiman Process Engineer Process Engineering Associates, LLC Copyright 2009 Process Engineering Associates, LLC. All rights reserved.
More informationIntroduction to vacuum gauges. Vacuum Gauges where the Pressure Readings are Independent of the Type of Gas (Mechanical Vacuum Gauges)
Introduction to vacuum gauges Vacuum Gauges where the Pressure Readings are Independent of the Type of Gas (Mechanical Vacuum Gauges) BOURDON Vacuum Gauge The inside of a tube which is bent into a circular
More informationSelecting TEMA Type Heat Exchangers
Selecting TEMA Type Heat Exchangers TEMA is a set of standards developed by leading heat exchanger manufacturers that defines the heat exchanger style and the machining and assembly tolerances to be employed
More informationThese features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
More informationGAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
More informationTHERMOPLASTIC LINERS FOR REHABILITATION OF OIL FLOWLINE AND WATER INJECTION LINES, INTEGRITY AND SERVICE LIFE
THERMOPLASTIC LINERS FOR REHABILITATION OF OIL FLOWLINE AND WATER INJECTION LINES, INTEGRITY AND SERVICE LIFE Vincenzo Savino [1] Mauyed S. Mehdi [1] Abdullah K. Al-Dossary [2] [1] Saudi Aramco, Consulting
More informationResidential Garage Door Terminology
A Air Infiltration: The leakage or passage of air through a door system Anodize: A hard non-corrosive oxide film on the surface of aluminum Astragal: A compressible or deformable seal provided on the bottom
More informationCopper and Copper Alloy Tube, Pipe and Fittings
Copper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification
More informationROOF DRAINS TABLE OF CONTENTS
Pictorial Index Product Recommendations Roof Drain Selection Factors Sizing Placement Material & Characteristics Pipe Connection Commonly Specified Options Typical Installations TABLE OF CONTENTS ROOF
More informationCENTRIFUGAL CASTING. Email: amitjoshi@iitb.ac.in amitjoshi1000@yahoo.ca
CENTRIFUGAL CASTING Amit M Joshi (B.Engg. Mechanical, A.M.I.Prod.E, A.I.E) Dept. of Metallurgical Engg. & Material Science, Indian Institute of Technology Bombay, India. Email: amitjoshi@iitb.ac.in amitjoshi1000@yahoo.ca
More informationOFFSHORE FIELD DEVELOPMENT
OFFSHORE FIELD DEVELOPMENT OPTIONS & STRATEGY By: Nguyen Ngoc Hoan M.Sc of Petroleum Engineering Hoannn@pidc.com.vn PRESENTATION CONTENT Field Development Consideration Field Development Options & Strategy
More informationMarine & Offshore Insulation. - products and constructions November 2009
Marine & Offshore Insulation - products and constructions November 2009 Marine and offshore insulation worldwide For many years ROCKWOOL Marine & Offshore has been one of the leading suppliers marine and
More informationBRAZED PLATE INSTALLATION MANUAL
www.brazedplate.com BRAZED PLATE INSTALLATION MANUAL S.E.C. Heat Exchangers P.E.I. CANADA C0A 1A0 tel; 902-659-2424 fax; 902-659-2800 Table of Contents Description...2 Mounting position...3 Piping connections......3
More informationSecondary Containment: Regulations & BMPs. Beth Powell Vice-President and General Manager New Pig Energy bethp@newpigenergy.com
Secondary Containment: Regulations & BMPs Beth Powell Vice-President and General Manager New Pig Energy bethp@newpigenergy.com Federal Secondary Containment Safeguarding method in addition to the primary
More informationTEMA DESIGNATIONS OF HEAT EXCHANGERS REMOVABLE BUNDLE EXCHANGERS NON REMOVABLE BUNDLE EXCHANGERS SOURCE: WWW.WERMAC.ORG/
TEMA DESIGNATIONS OF HEAT EXCHANGERS Because of the number of variations in mechanical designs for front and rear heads and shells, and for commercial reasons, TEMA has designated a system of notations
More informationRING TYPE JOINT GASKETS
RING TYPE JOINT GASKETS 05.07 GLOBAL RESOURCE FLEXITALLIC, A WORLDWIDE ORGANIZATION LOCAL SERVICE COMMITTED TO MEETING CUSTOMER NEEDS COMPREHENSIVE PRODUCT RANGE FOR ALL INDUSTRIAL AND PETROCHEMICAL APPLICATIONS
More informationGE Oil & Gas. Air cooled heat exchangers Robust and reliable for all loads and applications
GE Oil & Gas Air cooled heat exchangers Robust and reliable for all loads and applications What it is Air cooled heat exchangers are commonly used in industrial applications where a reliable source of
More informationAUSTENITIC STAINLESS DAMASCENE STEEL
AUSTENITIC STAINLESS DAMASCENE STEEL Damasteel s austenitic stainless Damascene Steel is a mix between types 304L and 316L stainless steels which are variations of the 18 percent chromium 8 percent nickel
More informationDrilling Problems. pull
Drilling Problems Pipe Sticking Lost Circulation Hole Deviation Pipe Failures Borehole Instability Mud Contamination Formation Damage Hole Cleaning H S General Equipment & Personnel Pipe Sticking Can not
More informationHeater Replacement Procedure
Heater Replacement Procedure Oil Diffusion Pump Model ULK-10A ULK-14A Components Division, ULVAC, Inc. http://www.ulvac.co.jp/ Preface We thank you very much for purchasing our product. This manual describes
More informationInstallation Guidelines: Resistance Thermometers and Temptran Thermometers for Building Automation Systems
APPLICATION AID SAA20 Installation Guidelines: Resistance Thermometers and Temptran Thermometers for Building Automation Systems Duct Air page 4 Thermal-Ribbon pages 6-7 Room Air Compact Room Air page
More informationEH-20 20m antenna. By VE3RGW
EH-20 20m antenna By VE3RGW Equivalent circuit of EH-20 (prototype 2A) antenna system. Upper cylinder Lower cylinder Ground Counter pose Phasing coil Impedance transformer and tune circuit Tune coil Feed
More informationV&A PROCONTROL. Rotary Valve Actuators Pneumatic & Hydraulic On-Off / Control / ESD Double Acting Spring Return All Steel SIL 3
V&A PROCONTROL Rotary Valve Actuators Pneumatic & Hydraulic OnOff / Control / ESD Double Acting Spring Return All Steel SIL 3 V R VP Series Technical Information V&A Procontrol VP series pneumatic steel
More informationWATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12
WATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12 87 88 GOOD INDUSTRY PRACTICES 12 WATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12.1 BACKGROUND Most roofs in Singapore are constructed using reinforced
More informationAn Introduction to Oil and Gas Well Servicing
An Introduction to Oil and Gas Well Servicing Educational Material from the IOM 3 Oil and Gas Division The global network for the materials cycle Introduction The Institute of Materials, Minerals & Mining
More informationSystem Solutions for Boiler Air Preheating
System Solutions for Boiler Air Preheating System Solutions for Boiler Air Preheating Quality Construction Designed to Perform & Built to Last Armstrong Preheat Coils outlast thin-finned and thin-walled
More informationinformation information
Technicalinformation Technicalinformation technicalinformation SYSTEM 40C GENERAL GROPERTIES 1 Glazing: from 4 to 22 mm 2 E.P.D.M. Sealing Gasket 3 Efficent drainage of the vent section 4 Efficent chamber
More informationOil and Gas Pipeline Design, Maintenance and Repair
Oil and Gas Pipeline Design, Maintenance and Repair Dr. Abdel-Alim Hashem Professor of Petroleum Engineering Mining, Petroleum & Metallurgical Eng. Dept. Faculty of Engineering Cairo University aelsayed@mail.eng.cu.edu.eg
More informationBB-18 Black Body High Vacuum System Technical Description
BB-18 Black Body High Vacuum System Technical Description The BB-18 Black Body is versatile and is programmed for use as a fixed cold target at 80 K or variable target, at 80 K- 350 K no extra cost. The
More informationLCD Readout Digital Pressure Switch
LCD Readout Digital Pressure Switch Series ZSE3 (For )/E3 (For Positive Pressure) For General Pneumatics Easy pressure setting with the digital display RoHS Can be integrated with a vacuum unit, Series
More informationCarlon Bore-Gard and Boreable Multi-Gard Raceway
Carlon Bore-Gard and Boreable Multi-Gard Raceway Bore-Gard Schedule 40 Bore-Gard Schedule 80 Boreable Multi-Gard Type 40 www.carlonsales.com 231 Bore-Gard Trenchless Raceway Carlon Bore-Gard Trenchless
More informationPresentation Outline. Background
Introduction ENVIRONMENTAL SYSTEMS, INC. Innovative Air Pollution Control Solutions Air Pollution Abatement Technologies for the Oil and Natural Gas Processing Industries. Jeff Kudronowicz / Application
More informationHeat Exchanger Thin Film Foul Release Applications Corrosion Resistant Protective Coatings Grit Blast Surface Prep of Tubular Equipment
Heat Exchanger Thin Film Foul Release Applications Corrosion Resistant Protective Coatings Grit Blast Surface Prep of Tubular Equipment Non-Destructive Examination Heat Exchanger Mechanical Repair Services
More informationTrouble Shooting. Pump
Trouble Shooting Pump Trouble Possible Cause Remedy Oil leaking in the area of water pump crankshaft Worn crankshaft seal, bad bearing, grooved shaft, or failure of retainer o-ring. Excessive play on crankshaft
More informationPrestige 3D Dado & Skirting Technical
Prestige 3D Dado & Skirting Technical 693 technical hotline +44 (0)268 5637 Standards and approvals The Prestige 3D System is manufactured in accordance with the requirements of S EN 50085-: 05 and S 4662:
More informationGas-Fired, Residential Storage Type Water Heaters
Consulting, Resource, Education, Training, and Support Services for Home Inspectors A candle loses no light when it lights another candle. Gas-Fired, Residential Storage Type Water Heaters Most inspectors
More informationStainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
More informationTRS 090/105 Compressor. Repair Procedures
TRS 090/105 Compressor Repair Procedures GENERAL FGG All repair and service operations should be performed on a clean bench and with the use of clean tools. Use genuine parts and correct tools for all
More informationSection V Removing Frozen or Broken Fasteners & Taps
154 CHAPTER 6 THREADS & THREADING Section V Removing Frozen or Broken Fasteners & Taps Frozen or Broken Fastener Removal What are the common methods for removing frozen or broken threaded fasteners? Here
More informationGE Oil & Gas. Air Cooled Heat Exchangers. Robust and reliable for all loads and applications
GE Oil & Gas Air Cooled Heat Exchangers Robust and reliable for all loads and applications What it is Air cooled heat exchangers are commonly used in industrial applications where a reliable source of
More informationTRENCHLESS TECHNOLOGY GUIDELINES CLOSE FIT THERMOPLASTIC LINING
TRENCHLESS TECHNOLOGIES RESOURCE CENTRE TRENCHLESS TECHNOLOGY GUIDELINES SECOND EDITION CLOSE FIT THERMOPLASTIC LINING NEW VERSION AUGUST 2005 1. OVERVIEW The use of liners that are deliberately deformed
More informationProfiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa
Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard
More informationETL listed for installations within 5 ft. (1.5M) of outer edge of water www.srsmith.com 79-15152-00 Rev E2 9.14 Page 1 of 10
Color Light Streams Large Laminar Installation Manual (CLSLL) Input Power: Total Power: 12V AC 5W 4008814 ETL listed for installations within 5 ft. (1.5M) of outer edge of water 79-15152-00 Rev E2 9.14
More informationORIFICE PLATES. CONCENTRIC BORE: For standard fluid conditions an Orifice Plate would have a centrally located orifice bore.
SUPERIOR PRODUCTS, INC. 20550 MADISON STREET, TORRANCE, CA 90503 ORIFICE PLATES MANUFACTURING STANDARDS: Superior Products manufactures Orifice Plates in strict accordance with the specifications of: AGA.,
More informationCooling system components, removing and installing
Volkswagen Touareg 3.2 - Cooling system components, removing and installing Page 1 / 24 19-1 Cooling system components, removing and installing Warning! Hot steam may escape when opening expansion tank.
More informationChapter 5 - Aircraft Welding
Chapter 5 - Aircraft Welding Chapter 5 Section A Study Aid Questions Fill in the Blanks 1. There are 3 types of welding:, and, welding. 2. The oxy acetylene flame, with a temperature of Fahrenheit is produced
More information4-600, 1000 psi. User s Guide to: Phoenix Vessel Technology Limited. End port pressure vessels Model numbers: 1386, 1384.
User s Guide to: Phoenix Vessel Technology Limited 4-600, 1000 psi End port pressure vessels Model numbers: 1386, 1384. Phoenix Vessel Technology Limited Unit 2, The Old Bakery, Lower Tuffley Lane, Gloucester
More informationHDD High Definition Data. defining a new standard for Open Hole, Cased Hole & Production Logging
HDD High Definition Data defining a new standard for Open Hole, Cased Hole & Production Logging Get More Accurate Data At No Extra Cost From RECON s Standard Logging Service At 10 samples per foot (33
More informationSERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
More informationTHERMA-TUBE preinsulated pipes and fittings Catalogue of products
THERMA-TUBE preinsulated pipes and fittings Catalogue of products THERMA TUBE preinsulated pipes and fittings TABLE OF CONTENTS 1. GENERAL INFORMATION ABOUT THE USE OF PREINSULATED PIPES AND FITTINGS...
More informationSERIES NG 1800 STRUCTURAL STEELWORK
MANUAL OF CONTRACT DOCUMENTS FOR HIGHWAY WORKS VOLUME 2 NOTES FOR GUIDANCE ON THE SPECIFICATION FOR HIGHWAY WORKS SERIES NG 1800 STRUCTURAL STEELWORK Contents Clause Title Page NG 1800 (08/14) General
More informationgasket type & material overview
gasket type & material overview gaskets a gasket is placed in between two objects in order to prevent leakage of any kind of the pressurized or not pressurized media. most important is the compression
More informationFront axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
More informationALLOY 2205 DATA SHEET
ALLOY 2205 DATA SHEET UNS S32205, EN 1.4462 / UNS S31803 GENERAL PROPERTIES ////////////////////////////////////////////////////// //// 2205 (UNS designations S32205 / S31803) is a 22 % chromium, 3 % molybdenum,
More informationGAS WELL/WATER WELL SUBSURFACE CONTAMINATION
GAS WELL/WATER WELL SUBSURFACE CONTAMINATION Rick Railsback Professional Geoscientist CURA Environmental & Emergency Services rick@curaes.com And ye shall know the truth and the truth shall make you free.
More informationCCI 100 DPC DRAG Wellhead Production Choke Valve
CCI 100 DPC DRAG Wellhead Production Choke Valve 2 Severe service DRAG choke valve delivers precise wellhead pressure control with superior reliability and life. Improves well production time Enhances
More informationNo Phone Line System. Quick Start Guide NPL II. 1.0 Installation
Used in conjunction with EntraGuard Gold Telephone Entry Systems, the provides No Phone Line communication and door or gate control through existing building telephone lines without the need purchase phone
More informationInstruction Manual. Cable Splicing. Models 4500-9, 4500-9-HDF1, 4500-9-HDF2 4500-9-SS1
Instruction Manual Cable Splicing Models 4500-9, 4500-9-HDF1, 4500-9-HDF2 4500-9-SS1 No part of this instruction manual may be reproduced, by any means, without the written consent of Geokon, Inc. The
More informationDuct PVC Duct Steel Duct Pre-Lubricated HDPE Bend PVC Duct Plug End Cap Duct Sealing Kit Sub Duct Anchor Plug PVC Cement PVC Cleaner Duct mandrel
Ducts & Accessories Duct PVC Duct Steel Duct Pre-Lubricated HDPE Bend PVC Duct Plug End Cap Duct Sealing Kit PVC Cement PVC Cleaner Duct mandrel Duct Brush Duct Rod and Accessories Cable Pulling Lubricant
More informationChapter 73 Articles of iron or steel
Notes. Chapter 73 Articles of iron or steel 1.- In this Chapter the expression cast iron applies to products obtained by casting in which iron predominates by weight over each of the other elements and
More informationInternational Electrotechnical Commission Standards
International Electrotechnical Commission Standards Standard IEC 60028 IEC 60038 IEC 60050-461 IEC 60055-1 IEC 60055-2 IEC 60092-101 IEC 60092-350 IEC 60092-351 IEC 60092-352 IEC 60092-353 IEC 60092-354
More informationCooling system components, removing and installing
Engine BHW Cooling system components, removing and installing Page 1 / 24 19-1 Cooling system components, removing and installing Warning! When doing any repair work, especially in the engine compartment,
More informationSPECIFICATIONS FOR STEEL PIPE
SPECIFICATIONS FOR STEEL PIPE Published pipe standards serve three functions. 1. They dictate manufacturing and testing requirements and prescribed methods of measuring the required mechanical and physical
More informationStandard Bills of Materials Commonly Ordered Models Only
Standard Bills of Materials Commonly Ordered Models Only Meters Always check www.lcmeter.com for the most current BOM. This document is for reference only. Always use Bill of Material shipped with meter
More informationFlow Assurance & Operability
Flow Assurance & Operability Erosion due to sand production Date Business Name Overview 1. What causes erosion? 2. Sand production and transport 3. Sand management 4. Instrumentation / monitoring of sand
More information