54ACT534 Octal D Flip-Flop with TRI-STATE Outputs

Size: px
Start display at page:

Download "54ACT534 Octal D Flip-Flop with TRI-STATE Outputs"

Transcription

1 54ACT534 Octal D Flip-Flop with TRI-STATE Outputs General Description The ACT534 is a high-speed, low-power octal D-type flip-flop featuring separate D-type inputs for each flip-flop and TRI-STATE outputs for bus-oriented applications. A buffered Clock (CP) and Output Enable (OE) are common to all flip-flops. The ACT534 is the same as the ACT374 except that the outputs are inverted. Features n I CC and I OZ reduced by 50% Logic Symbols DS n Edge-triggered D-type inputs n Buffered positive edge-triggered clock n TRI-STATE outputs for bus-oriented applications n Outputs source/sink 24 ma n ACT534 has TTL-compatible inputs n Inverted output version of ACT374 n Standard Microcircuit Drawing (SMD) IEEE/IEC July ACT534 Octal D Flip-Flop with TRI-STATE Outputs DS Pin Names D 0 D 7 CP OE O 0 O 7 Description Data Inputs Clock Pulse Input TRI-STATE Output Enable Input Complementary TRI-STATE Outputs TRI-STATE is a registered trademark of National Semiconductor Corporation. FACT is a trademark of Fairchild Semiconductor Corporation National Semiconductor Corporation DS

2 Connection Diagrams Pin Assignment for DIP and Flatpak Pin Assignment for LCC DS DS Functional Description The ACT534 consists of eight edge-triggered flip-flops with individual D-type inputs and TRI-STATE complementary outputs. The buffered clock and buffered Output Enable are common to all flip-flops. The eight flip-flops will store the state of their individual D inputs that meet the setup and hold Logic Diagram times requirements on the LOW-to-HIGH Clock (CP) transition. With the Output Enable (OE) LOW, the contents of the eight flip-flops are available at the outputs. When the OE is HIGH, the outputs go to the high impedance state. Operation of the OE input does not affect the state of the flip-flops. DS Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. Function Table Inputs Output CP OE D O N L H L N L L H L L X O 0 X H X Z H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial N = LOW-to-HIGH Clock Transition Z = High Impedance O 0 = Value stored from previous clock cycle 2

3 Absolute Maximum Ratings (Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage (V CC ) 0.5V to +7.0V DC Input Diode Current (I IK ) V I = 0.5V 20 ma V I = V CC + 0.5V +20 ma DC Input Voltage (V I ) 0.5V to V CC + 0.5V DC Output Diode Current (I OK ) V O = 0.5V 20 ma V O = V CC + 0.5V +20 ma DC Output Voltage (V O ) 0.5V to V CC + 0.5V DC Output Source or Sink Current (I O ) ±50 ma DC V CC or Ground Current per Output Pin (I CC or I GND ) ±50 ma Storage Temperature (T STG ) 65 C to +150 C DC Characteristics for ACT Family Devices Junction Temperature (T J ) CDIP Recommended Operating Conditions 175 C Supply Voltage (V CC ) ACT 4.5V to 5.5V Input Voltage (V I ) 0VtoV CC Output Voltage (V O ) 0VtoV CC Operating Temperature (T A ) 54ACT 55 C to +125 C Minimum Input Edge Rate ( V/ t) ACT Devices V IN from 0.8V to 2.0V V 4.5V, 5.5V 125 mv/ns Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. National does not recommend operation of FACT circuits outside databook specifications. 54ACT Symbol Parameter V CC T A = Units Conditions (V) 55 C to +125 C Guaranteed Limits V IH Minimum High Level V V OUT = 0.1V Input Voltage or V CC 0.1V V IL Maximum Low Level V V OUT = 0.1V Input Voltage or V CC 0.1V V OH Minimum High Level V I OUT = 50 µa Output Voltage (Note 2) V IN = V IL or V IH V I OH = 24 ma I OH = 24 ma V OL Maximum Low Level V I OUT = 50 µa Output Voltage (Note 2) I IN Maximum Input Leakage Current V IN = V IL or V IH V I OL =24mA I OL =24mA 5.5 ±1.0 µa V I = V CC, GND I OZ Maximum TRI-STATE 5.5 ±5.0 µa V I = V IL,V IH Current V O = V CC, GND I CCT Maximum I CC /Input ma V I = V CC 2.1V I OLD Minimum Dynamic ma V OLD = 1.65V Max I OHD Output Current (Note 3) ma V OHD = 3.85V Min I CC Maximum Quiescent µa V IN = V CC Supply Current or GND Note 2: All outputs loaded; thresholds on input associated with output under test. Note 3: Maximum test duration 2.0 ms, one output loaded at a time. Note 4: I CC for 25 C is identical to 25 C. 3

4 AC Electrical Characteristics 54ACT V CC T A = 55 C Fig. Symbol Parameter (V) to +125 C Units No. (Note 5) C L = 50 pf Min Max f max Maximum Clock MHz Frequency t PLH Propagation Delay ns CP to Q n t PHL Propagation Delay ns CP to Q n t PZH Output Enable Time ns t PZL Output Enable Time ns t PHZ Output Disable Time ns t PLZ Output Disable Time ns Note 5: Voltage Range 5.0 is 5.0V ±0.5V AC Operating Requirements 54ACT V CC T A = 55 C Fig. Symbol Parameter (V) to +125 C Units No. (Note 6) C L = 50 pf Guaranteed Minimum t s Setup Time, HIGH or LOW ns D n to CP t h Hold Time, HIGH or LOW ns D n to CP t w CP Pulse Width ns HIGH or LOW Note 6: Voltage Range 5.0 is 5.0V ±0.5V Capacitance Symbol Parameter Typ Units Conditions C IN Input Capacitance 4.5 pf V CC = OPEN C PD Power Dissipation 40.0 pf V CC = 5.0V Capacitance 4

5 Physical Dimensions inches (millimeters) unless otherwise noted 20 Terminal Ceramic Leadless Chip Carrier (L) NS Package Number E20A 16 Lead Ceramic Dual-In-Line Package (D) NS Package Number J16A 5

6 54ACT534 Octal D Flip-Flop with TRI-STATE Outputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16 Lead Ceramic Flatpak (F) NS Package Number W16A LIFE SUPPORT POLICY NATIONAL S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DE- VICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMI- CONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Corporation Americas Tel: Fax: National Semiconductor Europe Fax: +49 (0) Deutsch Tel: +49 (0) English Tel: +49 (0) Français Tel: +49 (0) Italiano Tel: +49 (0) National Semiconductor Asia Pacific Customer Response Group Tel: Fax: National Semiconductor Japan Ltd. Tel: Fax: National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.

7 National Semiconductor Company Product Folder Design Purchasing Quality Company Jobs Products > Military/Aerospace > Logic > FACT ACT > 54ACT534 54ACT534 Octal D Flip-Flop with TRI-STATE Outputs Contents General Description Features Datasheet Package Availability, Models, Samples & Pricing General Description The 'ACT534 is a high-speed, low-power octal D-type flip-flop featuring separate D-type inputs for each flip-flop and TRI-STATE outputs for bus-oriented applications. A buffered Clock (CP) and Output Enable (OE#) are common to all flip-flops. The 'ACT534 is the same as the 'ACT374 except that the outputs are inverted. Features I CC and I OZ reduced by 50% Edge-triggered D-type inputs Buffered positive edge-triggered clock TRI-STATE outputs for bus-oriented applications Outputs source/sink 24 ma 'ACT534 has TTL-compatible inputs Inverted output version of 'ACT374 Standard Microcircuit Drawing (SMD)

8 Datasheet Title Please use Adobe Acrobat to view PDF file(s). If you have trouble printing, see Printing Problems. Size (in Kbytes) Date View Online Download Receive via 54ACT534 Octal D Flip-Flop with TRI-STATE Outputs 149 Kbytes 6-Aug-98 View Online Download Receive via Package Availability, Models, Samples & Pricing Part Number [Information as of 1-Sep-2000] Package Models Samples Budgetary Pricing & Status Electronic Type # pins SPICE IBIS Orders Quantity $US each A LCC 20 Full production N/A N/A. 50+ $ RA Cerdip 20 Full production N/A N/A. 50+ $ SA Cerpack 20 Full production N/A N/A. 50+ $ Std Pack Size tube of 50 tube of 20 tube of 19 Package Marking [logo] Z S 4 A 54ACT534 LMQB /Q M$E A [logo] Z S 4 A$E 54ACT534DMQB /Q M RA [logo] Z S 4 A$E 54ACT534FMQB Q M SA Quick Search Parametric Search System Diagrams Product Tree Home

9 About Languages. About the Site. About "Cookies" National is QS 9000 Certified. Privacy/Security Copyright National Semiconductor Corporation Preferences. Feedback

74VHCT574A Octal D-Type Flip-Flop with 3-STATE Outputs

74VHCT574A Octal D-Type Flip-Flop with 3-STATE Outputs 74VHCT574A Octal D-Type Flip-Flop with 3-STATE Outputs General Description The VHCT574A is an advanced high speed CMOS octal flip-flop with 3-STATE output fabricated with silicon gate CMOS technology.

More information

74AC139 74ACT139 Dual 1-of-4 Decoder/Demultiplexer

74AC139 74ACT139 Dual 1-of-4 Decoder/Demultiplexer Dual 1-of-4 Decoder/Demultiplexer General Description The AC/ACT139 is a high-speed, dual 1-of-4 decoder/ demultiplexer. The device has two independent decoders, each accepting two inputs and providing

More information

DM74LS373/DM74LS374 3-STATE Octal D-Type Transparent Latches and Edge-Triggered Flip-Flops

DM74LS373/DM74LS374 3-STATE Octal D-Type Transparent Latches and Edge-Triggered Flip-Flops DM74LS373/DM74LS374 3-STATE Octal D-Type Transparent Latches and Edge-Triggered Flip-Flops General Description These 8-bit registers feature totem-pole 3-STATE outputs designed specifically for driving

More information

74AC163 74ACT163 Synchronous Presettable Binary Counter

74AC163 74ACT163 Synchronous Presettable Binary Counter 74AC163 74ACT163 Synchronous Presettable Binary Counter General Description The AC/ACT163 are high-speed synchronous modulo-16 binary counters. They are synchronously presettable for application in programmable

More information

74VHC574 Octal D-Type Flip-Flop with 3-STATE Outputs

74VHC574 Octal D-Type Flip-Flop with 3-STATE Outputs 74HC574 Octal D-Type Flip-Flop with 3-STATE Outputs General Description Ordering Code: March 1993 Revised May 2005 The HC574 is an advanced high speed CMOS octal flipflop with 3-STATE output fabricated

More information

MM74HCT373 MM74HCT374 3-STATE Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop

MM74HCT373 MM74HCT374 3-STATE Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop 3-STATE Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop General Description The MM74HCT373 octal D-type latches and MM74HCT374 Octal D-type flip flops advanced silicongate CMOS technology, which provides

More information

74F174 Hex D-Type Flip-Flop with Master Reset

74F174 Hex D-Type Flip-Flop with Master Reset Hex D-Type Flip-Flop with Master Reset General Description The 74F174 is a high-speed hex D-type flip-flop. The device is used primarily as a 6-bit edge-triggered storage register. The information on the

More information

74AC138 74ACT138 1-of-8 Decoder/Demultiplexer

74AC138 74ACT138 1-of-8 Decoder/Demultiplexer 1-of-8 Decoder/Demultiplexer General Description The AC/ACT138 is a high-speed 1-of-8 decoder/demultiplexer. This device is ideally suited for high-speed bipolar memory chip select address decoding. The

More information

MM74HC273 Octal D-Type Flip-Flops with Clear

MM74HC273 Octal D-Type Flip-Flops with Clear MM74HC273 Octal D-Type Flip-Flops with Clear General Description The MM74HC273 edge triggered flip-flops utilize advanced silicon-gate CMOS technology to implement D-type flipflops. They possess high noise

More information

54LS113 Dual JK Edge-Triggered Flip-Flop

54LS113 Dual JK Edge-Triggered Flip-Flop 54LS113 Dual JK Edge-Triggered Flip-Flop General Description The 54LS113 offers individual J K Set and Clock inputs When the clock goes HIGH the inputs are enabled and data may be entered The logic level

More information

74AC191 Up/Down Counter with Preset and Ripple Clock

74AC191 Up/Down Counter with Preset and Ripple Clock 74AC191 Up/Down Counter with Preset and Ripple Clock General Description The AC191 is a reversible modulo 16 binary counter. It features synchronous counting and asynchronous presetting. The preset feature

More information

DM7474 Dual Positive-Edge-Triggered D-Type Flip-Flops with Preset, Clear and Complementary Outputs

DM7474 Dual Positive-Edge-Triggered D-Type Flip-Flops with Preset, Clear and Complementary Outputs DM7474 Dual Positive-Edge-Triggered D-Type Flip-Flops with Preset, Clear and Complementary Outputs General Description This device contains two independent positive-edge-triggered D-type flip-flops with

More information

DM74157 Quad 2-Line to 1-Line Data Selectors/Multiplexers

DM74157 Quad 2-Line to 1-Line Data Selectors/Multiplexers DM74157 Quad 2-Line to 1-Line Data Selectors/Multiplexers General Description These data selectors/multiplexers contain inverters and drivers to supply full on-chip data selection to the four out-put gates.

More information

MM74HC174 Hex D-Type Flip-Flops with Clear

MM74HC174 Hex D-Type Flip-Flops with Clear Hex D-Type Flip-Flops with Clear General Description The MM74HC174 edge triggered flip-flops utilize advanced silicon-gate CMOS technology to implement D-type flipflops. They possess high noise immunity,

More information

74F74 Dual D-Type Positive Edge-Triggered Flip-Flop

74F74 Dual D-Type Positive Edge-Triggered Flip-Flop Dual D-Type Positive Edge-Triggered Flip-Flop General Description The F74 is a dual D-type flip-flop with Direct Clear and Set inputs and complementary (Q, Q) outputs. Information at the input is traferred

More information

CD4094BC 8-Bit Shift Register/Latch with 3-STATE Outputs

CD4094BC 8-Bit Shift Register/Latch with 3-STATE Outputs 8-Bit Shift Register/Latch with 3-STATE Outputs General Description The CD4094BC consists of an 8-bit shift register and a 3-STATE 8-bit latch. Data is shifted serially through the shift register on the

More information

CD4034BM CD4034BC 8-Stage TRI-STATE Bidirectional Parallel Serial Input Output Bus Register

CD4034BM CD4034BC 8-Stage TRI-STATE Bidirectional Parallel Serial Input Output Bus Register February 1988 CD4034BM CD4034BC 8-Stage TRI-STATE Bidirectional Parallel Serial Input Output Bus Register General Description The CD4034BM CD4034BC is an 8-bit CMOS static shift register with two parallel

More information

54F 74F544 Octal Registered Transceiver

54F 74F544 Octal Registered Transceiver 54F 74F544 Octal Registered Transceiver General Description The F544 octal transceiver contains two sets of D-type latches for temporary storage of data flowing in either direction Separate Latch Enable

More information

NC7SV86 TinyLogic ULP-A 2-Input Exclusive-OR Gate

NC7SV86 TinyLogic ULP-A 2-Input Exclusive-OR Gate TinyLogic ULP-A 2-Input Exclusive-OR Gate General Description The NC7SV86 is a single 2-Input Exclusive-OR Gate from Fairchild s Ultra Low Power-A (ULP-A) Series of TinyLogic. ULP-A is ideal for applications

More information

5495A DM7495 4-Bit Parallel Access Shift Registers

5495A DM7495 4-Bit Parallel Access Shift Registers 5495A DM7495 4-Bit Parallel Access Shift Registers General Description These 4-bit registers feature parallel and serial inputs parallel outputs mode control and two clock inputs The registers have three

More information

74AC74, 74ACT74 Dual D-Type Positive Edge-Triggered Flip-Flop

74AC74, 74ACT74 Dual D-Type Positive Edge-Triggered Flip-Flop 74AC74, 74ACT74 Dual D-Type Positive Edge-Triggered Flip-Flop Features I CC reduced by 50% Output source/sink 24mA ACT74 has TTL-compatible inputs Ordering Information Order Number Package Number General

More information

DM54LS260 DM74LS260 Dual 5-Input NOR Gate

DM54LS260 DM74LS260 Dual 5-Input NOR Gate DM54LS260 DM74LS260 Dual 5-Input NOR Gate General Description This device contains two individual five input gates each of which perform the logic NOR function Connection Diagram Dual-In-Line Package TL

More information

MM74HC14 Hex Inverting Schmitt Trigger

MM74HC14 Hex Inverting Schmitt Trigger MM74HC14 Hex Inverting Schmitt Trigger General Description The MM74HC14 utilizes advanced silicon-gate CMOS technology to achieve the low power dissipation and high noise immunity of standard CMOS, as

More information

DM74LS193 Synchronous 4-Bit Binary Counter with Dual Clock

DM74LS193 Synchronous 4-Bit Binary Counter with Dual Clock September 1986 Revised March 2000 DM74LS193 Synchronous 4-Bit Binary Counter with Dual Clock General Description The DM74LS193 circuit is a synchronous up/down 4-bit binary counter. Synchronous operation

More information

NC7SV74 TinyLogic ULP-A D-Type Flip-Flop with Preset and Clear

NC7SV74 TinyLogic ULP-A D-Type Flip-Flop with Preset and Clear NC7SV74 TinyLogic ULP-A D-Type Flip-Flop with Preset and Clear Features Space-saving US8 surface-mount package MicroPak Pb-free leadless package 0.9V to 3.6V V CC supply operation 3.6V over-voltage tolerant

More information

CD4043BC CD4044BC Quad 3-STATE NOR R/S Latches Quad 3-STATE NAND R/S Latches

CD4043BC CD4044BC Quad 3-STATE NOR R/S Latches Quad 3-STATE NAND R/S Latches CD4043BC CD4044BC Quad 3-STATE NOR R/S Latches Quad 3-STATE NAND R/S Latches General Description The CD4043BC are quad cross-couple 3-STATE CMOS NOR latches, and the CD4044BC are quad cross-couple 3- STATE

More information

CD4027BM CD4027BC Dual J-K Master Slave Flip-Flop with Set and Reset

CD4027BM CD4027BC Dual J-K Master Slave Flip-Flop with Set and Reset CD4027BM CD4027BC Dual J-K Master Slave Flip-Flop with Set and Reset General Description These dual J-K flip-flops are monolithic complementary MOS (CMOS) integrated circuits constructed with N- and P-

More information

DATA SHEET. HEF40374B MSI Octal D-type flip-flop with 3-state outputs. For a complete data sheet, please also download: INTEGRATED CIRCUITS

DATA SHEET. HEF40374B MSI Octal D-type flip-flop with 3-state outputs. For a complete data sheet, please also download: INTEGRATED CIRCUITS INTEGRATED CIRCUITS DATA SHEET For a complete data sheet, please also download: The IC04 LOCMOS HE4000B Logic Family Specifications HEF, HEC The IC04 LOCMOS HE4000B Logic Package Outlines/Information HEF,

More information

54LS193 DM54LS193 DM74LS193 Synchronous 4-Bit Up Down Binary Counters with Dual Clock

54LS193 DM54LS193 DM74LS193 Synchronous 4-Bit Up Down Binary Counters with Dual Clock 54LS193 DM54LS193 DM74LS193 Synchronous 4-Bit Up Down Binary Counters with Dual Clock General Description This circuit is a synchronous up down 4-bit binary counter Synchronous operation is provided by

More information

54191 DM54191 DM74191 Synchronous Up Down 4-Bit Binary Counter with Mode Control

54191 DM54191 DM74191 Synchronous Up Down 4-Bit Binary Counter with Mode Control 54191 DM54191 DM74191 Synchronous Up Down 4-Bit Binary Counter with Mode Control General Description This circuit is a synchronous reversible up down counter The 191 is a 4-bit binary counter Synchronous

More information

Quad 2-Line to 1-Line Data Selectors Multiplexers

Quad 2-Line to 1-Line Data Selectors Multiplexers 54LS157 DM54LS157 DM74LS157 54LS158 DM54LS158 DM74LS158 Quad 2-Line to 1-Line Data Selectors Multiplexers General Description These data selectors multiplexers contain inverters and drivers to supply full

More information

CD4001BC/CD4011BC Quad 2-Input NOR Buffered B Series Gate Quad 2-Input NAND Buffered B Series Gate

CD4001BC/CD4011BC Quad 2-Input NOR Buffered B Series Gate Quad 2-Input NAND Buffered B Series Gate CD4001BC/CD4011BC Quad 2-Input NOR Buffered B Series Gate Quad 2-Input NAND Buffered B Series Gate General Description The CD4001BC and CD4011BC quad gates are monolithic complementary MOS (CMOS) integrated

More information

DM74LS191 Synchronous 4-Bit Up/Down Counter with Mode Control

DM74LS191 Synchronous 4-Bit Up/Down Counter with Mode Control August 1986 Revised February 1999 DM74LS191 Synchronous 4-Bit Up/Down Counter with Mode Control General Description The DM74LS191 circuit is a synchronous, reversible, up/ down counter. Synchronous operation

More information

54LS169 DM54LS169A DM74LS169A Synchronous 4-Bit Up Down Binary Counter

54LS169 DM54LS169A DM74LS169A Synchronous 4-Bit Up Down Binary Counter 54LS169 DM54LS169A DM74LS169A Synchronous 4-Bit Up Down Binary Counter General Description This synchronous presettable counter features an internal carry look-ahead for cascading in high-speed counting

More information

MM54C150 MM74C150 16-Line to 1-Line Multiplexer

MM54C150 MM74C150 16-Line to 1-Line Multiplexer MM54C150 MM74C150 16-Line to 1-Line Multiplexer MM72C19 MM82C19 TRI-STATE 16-Line to 1-Line Multiplexer General Description The MM54C150 MM74C150 and MM72C19 MM82C19 multiplex 16 digital lines to 1 output

More information

CD4027BC Dual J-K Master/Slave Flip-Flop with Set and Reset

CD4027BC Dual J-K Master/Slave Flip-Flop with Set and Reset October 1987 Revised March 2002 CD4027BC Dual J-K Master/Slave Flip-Flop with Set and Reset General Description The CD4027BC dual J-K flip-flops are monolithic complementary MOS (CMOS) integrated circuits

More information

CD4042BM CD4042BC Quad Clocked D Latch

CD4042BM CD4042BC Quad Clocked D Latch CD4042BM CD4042BC Quad Clocked D Latch General Description The CD4042BM CD4042BC quad clocked D latch is a monolithic complementary MOS (CMOS) integrated circuit constructed with P- and N-channel enhancement

More information

CD40174BC CD40175BC Hex D-Type Flip-Flop Quad D-Type Flip-Flop

CD40174BC CD40175BC Hex D-Type Flip-Flop Quad D-Type Flip-Flop Hex D-Type Flip-Flop Quad D-Type Flip-Flop General Description The CD40174BC consists of six positive-edge triggered D- type flip-flops; the true outputs from each flip-flop are externally available. The

More information

54157 DM54157 DM74157 Quad 2-Line to 1-Line Data Selectors Multiplexers

54157 DM54157 DM74157 Quad 2-Line to 1-Line Data Selectors Multiplexers 54157 DM54157 DM74157 Quad 2-Line to 1-Line Data Selectors Multiplexers General Description These data selectors multiplexers contain inverters and drivers to supply full on-chip data selection to the

More information

DM74LS00 Quad 2-Input NAND Gate

DM74LS00 Quad 2-Input NAND Gate DM74LS00 Quad 2-Input NAND Gate General Description This device contains four independent gates each of which performs the logic NAND function. Ordering Code: August 1986 Revised March 2000 Order Number

More information

DM8898 DM8899 TRI-STATE BCD to Binary Binary to BCD Converters

DM8898 DM8899 TRI-STATE BCD to Binary Binary to BCD Converters DM8898 DM8899 TRI-STATE BCD to Binary Binary to BCD Converters General Description These circuits are the TRI-STATE versions of the popular BCD to binary and binary to BCD converters DM74184 and DM74185A

More information

DM54161 DM74161 DM74163 Synchronous 4-Bit Counters

DM54161 DM74161 DM74163 Synchronous 4-Bit Counters DM54161 DM74161 DM74163 Synchronous 4-Bit Counters General Description These synchronous presettable counters feature an internal carry look-ahead for application in high-speed counting designs The 161

More information

DM74LS169A Synchronous 4-Bit Up/Down Binary Counter

DM74LS169A Synchronous 4-Bit Up/Down Binary Counter Synchronous 4-Bit Up/Down Binary Counter General Description This synchronous presettable counter features an internal carry look-ahead for cascading in high-speed counting applications. Synchronous operation

More information

CD4013BC Dual D-Type Flip-Flop

CD4013BC Dual D-Type Flip-Flop CD4013BC Dual D-Type Flip-Flop General Description The CD4013B dual D-type flip-flop is a monolithic complementary MOS (CMOS) integrated circuit constructed with N- and P-channel enhancement mode transistors.

More information

DM74LS112A Dual Negative-Edge-Triggered Master-Slave J-K Flip-Flop with Preset, Clear, and Complementary Outputs

DM74LS112A Dual Negative-Edge-Triggered Master-Slave J-K Flip-Flop with Preset, Clear, and Complementary Outputs August 1986 Revised March 2000 DM74LS112A Dual Negative-Edge-Triggered Master-Slave J-K Flip-Flop with Preset, Clear, and Complementary General Description This device contains two independent negative-edge-triggered

More information

MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer

MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer General Description The MM74C150 and MM82C19 multiplex 16 digital lines to 1 output. A 4-bit address code determines

More information

LM723/LM723C Voltage Regulator

LM723/LM723C Voltage Regulator LM723/LM723C Voltage Regulator General Description The LM723/LM723C is a voltage regulator designed primarily for series regulator applications. By itself, it will supply output currents up to 150 ma;

More information

5485 DM5485 DM7485 4-Bit Magnitude Comparators

5485 DM5485 DM7485 4-Bit Magnitude Comparators 5485 DM5485 DM7485 4-Bit Magnitude Comparators General Description These 4-bit magnitude comparators perform comparison of straight binary or BCD codes Three fully-decoded decisions about two 4-bit words

More information

CD4008BM CD4008BC 4-Bit Full Adder

CD4008BM CD4008BC 4-Bit Full Adder CD4008BM CD4008BC 4-Bit Full Adder General Description The CD4008B types consist of four full-adder stages with fast look-ahead carry provision from stage to stage Circuitry is included to provide a fast

More information

MM74HC4046 CMOS Phase Lock Loop

MM74HC4046 CMOS Phase Lock Loop CMOS Phase Lock Loop General Description The MM74HC4046 is a low power phase lock loop utilizing advanced silicon-gate CMOS technology to obtain high frequency operation both in the phase comparator and

More information

DM74LS05 Hex Inverters with Open-Collector Outputs

DM74LS05 Hex Inverters with Open-Collector Outputs Hex Inverters with Open-Collector Outputs General Description This device contains six independent gates each of which performs the logic INVERT function. The open-collector outputs require external pull-up

More information

DM74LS151 1-of-8 Line Data Selector/Multiplexer

DM74LS151 1-of-8 Line Data Selector/Multiplexer 1-of-8 Line Data Selector/Multiplexer General Description This data selector/multiplexer contains full on-chip decoding to select the desired data source. The DM74LS151 selects one-of-eight data sources.

More information

74F675A 16-Bit Serial-In, Serial/Parallel-Out Shift Register

74F675A 16-Bit Serial-In, Serial/Parallel-Out Shift Register 74F675A 16-Bit Serial-In, Serial/Parallel-Out Shift Register General Description The 74F675A contai a 16-bit serial in/serial out shift register and a 16-bit parallel out storage register. Separate serial

More information

CD4001BC/CD4011BC Quad 2-Input NOR Buffered B Series Gate Quad 2-Input NAND Buffered B Series Gate

CD4001BC/CD4011BC Quad 2-Input NOR Buffered B Series Gate Quad 2-Input NAND Buffered B Series Gate Quad 2-Input NOR Buffered B Series Gate Quad 2-Input NAND Buffered B Series Gate General Description The CD4001BC and CD4011BC quad gates are monolithic complementary MOS (CMOS) integrated circuits cotructed

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) DUAL D TYPE FLIP FLOP WITH PRESET AND CLEAR HIGH SPEED : f MAX = 48MHz (TYP.) at V CC = 4.5V LOW POWER DISSIPATION: I CC =2µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS : V IH = 2V (MIN.) V IL = 0.8V

More information

DM9368 7-Segment Decoder/Driver/Latch with Constant Current Source Outputs

DM9368 7-Segment Decoder/Driver/Latch with Constant Current Source Outputs DM9368 7-Segment Decoder/Driver/Latch with Constant Current Source Outputs General Description The DM9368 is a 7-segment decoder driver incorporating input latches and constant current output circuits

More information

DM74121 One-Shot with Clear and Complementary Outputs

DM74121 One-Shot with Clear and Complementary Outputs June 1989 Revised July 2001 DM74121 One-Shot with Clear and Complementary Outputs General Description The DM74121 is a monostable multivibrator featuring both positive and negative edge triggering with

More information

LM380 Audio Power Amplifier

LM380 Audio Power Amplifier LM380 Audio Power Amplifier General Description The LM380 is a power audio amplifier for consumer application. In order to hold system cost to a minimum, gain is internally fixed at 34 db. A unique input

More information

INTEGRATED CIRCUITS. 74LVC08A Quad 2-input AND gate. Product specification IC24 Data Handbook. 1997 Jun 30

INTEGRATED CIRCUITS. 74LVC08A Quad 2-input AND gate. Product specification IC24 Data Handbook. 1997 Jun 30 INTEGRATED CIRCUITS IC24 Data Handbook 1997 Jun 30 FEATURES Wide supply voltage range of 1.2 V to 3.6 V In accordance with JEDEC standard no. 8-1A Inputs accept voltages up to 5.5 V CMOS low power consumption

More information

MM74HC4538 Dual Retriggerable Monostable Multivibrator

MM74HC4538 Dual Retriggerable Monostable Multivibrator MM74HC4538 Dual Retriggerable Monostable Multivibrator General Description The MM74HC4538 high speed monostable multivibrator (one shots) is implemented in advanced silicon-gate CMOS technology. They feature

More information

MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer

MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer General Description The MM74C150 and MM82C19 multiplex 16 digital lines to 1 output. A 4-bit address code determines

More information

DM74LS153 Dual 1-of-4 Line Data Selectors/Multiplexers

DM74LS153 Dual 1-of-4 Line Data Selectors/Multiplexers Dual 1-of-4 Line Data Selectors/Multiplexers General Description Each of these data selectors/multiplexers contains inverters and drivers to supply fully complementary, on-chip, binary decoding data selection

More information

DM74LS157 DM74LS158 Quad 2-Line to 1-Line Data Selectors/Multiplexers

DM74LS157 DM74LS158 Quad 2-Line to 1-Line Data Selectors/Multiplexers September 1986 Revised April 2000 DM74LS157 DM74LS158 Quad 2-Line to 1-Line Data Selectors/Multiplexers General Description These data selectors/multiplexers contain inverters and drivers to supply full

More information

CD4093BM CD4093BC Quad 2-Input NAND Schmitt Trigger

CD4093BM CD4093BC Quad 2-Input NAND Schmitt Trigger CD4093BM CD4093BC Quad 2-Input NAND Schmitt Trigger General Description The CD4093B consists of four Schmitt-trigger circuits Each circuit functions as a 2-input NAND gate with Schmitt-trigger action on

More information

LM78XX Series Voltage Regulators

LM78XX Series Voltage Regulators LM78XX Series Voltage Regulators General Description Connection Diagrams The LM78XX series of three terminal regulators is available with several fixed output voltages making them useful in a wide range

More information

CD4511BM CD4511BC BCD-to-7 Segment Latch Decoder Driver

CD4511BM CD4511BC BCD-to-7 Segment Latch Decoder Driver CD4511BM CD4511BC BCD-to-7 Segment Latch Decoder Driver General Description The CD4511BM CD4511BC BCD-to-seven segment latch decoder driver is constructed with complementary MOS (CMOS) enhancement mode

More information

74LS193 Synchronous 4-Bit Binary Counter with Dual Clock

74LS193 Synchronous 4-Bit Binary Counter with Dual Clock 74LS193 Synchronous 4-Bit Binary Counter with Dual Clock General Description The DM74LS193 circuit is a synchronous up/down 4-bit binary counter. Synchronous operation is provided by having all flip-flops

More information

74VHC273 Octal D-Type Flip-Flop

74VHC273 Octal D-Type Flip-Flop 74VHC273 Octal D-Type Flip-Flop Features High Speed: f MAX = 165MHz (typ) at V CC = 5V Low power dissipation: I CC = 4µA (max) at T A = 25 C High noise immunity: V NIH = V NIL = 28% V CC (min) Power down

More information

How to Read a Datasheet

How to Read a Datasheet How to Read a Datasheet Prepared for the WIMS outreach program 5/6/02, D. Grover In order to use a PIC microcontroller, a flip-flop, a photodetector, or practically any electronic device, you need to consult

More information

DM74LS123 Dual Retriggerable One-Shot with Clear and Complementary Outputs

DM74LS123 Dual Retriggerable One-Shot with Clear and Complementary Outputs DM74LS123 Dual Retriggerable One-Shot with Clear and Complementary Outputs General Description The DM74LS123 is a dual retriggerable monostable multivibrator capable of generating output pulses from a

More information

LM118/LM218/LM318 Operational Amplifiers

LM118/LM218/LM318 Operational Amplifiers LM118/LM218/LM318 Operational Amplifiers General Description The LM118 series are precision high speed operational amplifiers designed for applications requiring wide bandwidth and high slew rate. They

More information

MM74C74 Dual D-Type Flip-Flop

MM74C74 Dual D-Type Flip-Flop Dual D-Type Flip-Flop General Description The MM74C74 dual D-type flip-flop is a monolithic complementary MOS (CMOS) integrated circuit cotructed with N- and P-channel enhancement traistors. Each flip-flop

More information

CD4013BC Dual D-Type Flip-Flop

CD4013BC Dual D-Type Flip-Flop Dual D-Type Flip-Flop General Description The CD4013B dual D-type flip-flop is a monolithic complementary MOS (CMOS) integrated circuit cotructed with N- and P-channel enhancement mode traistors. Each

More information

Description. Table 1. Device summary. Order code Temperature range Package Packaging Marking M74HC4094RM13TR -55/+125 C SO16

Description. Table 1. Device summary. Order code Temperature range Package Packaging Marking M74HC4094RM13TR -55/+125 C SO16 8-bit SIPO shift latch register (3-state) SO16 TSSOP16 Applicatio Automotive Industrial Computer Coumer Datasheet - production data Features High speed: f MAX = 80 MHz (typ.) at V CC = 6 V Low power dissipation:

More information

Features. Applications

Features. Applications LM555 Timer General Description The LM555 is a highly stable device for generating accurate time delays or oscillation. Additional terminals are provided for triggering or resetting if desired. In the

More information

74HC574; 74HCT574. Octal D-type flip-flop; positive edge-trigger; 3-state

74HC574; 74HCT574. Octal D-type flip-flop; positive edge-trigger; 3-state Rev. 7 4 March 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device

More information

M74HC4078TTR 8-INPUT NOR/OR GATE

M74HC4078TTR 8-INPUT NOR/OR GATE 8-INPUT NOR/OR GATE HIGH SPEED: t PD = 10ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:

More information

Low-power D-type flip-flop; positive-edge trigger; 3-state

Low-power D-type flip-flop; positive-edge trigger; 3-state Rev. 8 29 November 2012 Product data sheet 1. General description The provides the single D-type flip-flop with 3-state output. The flip-flop will store the state of data input (D) that meet the set-up

More information

Description. Order code Temperature range Package Packing Marking

Description. Order code Temperature range Package Packing Marking Dual D-type flip-flop PDIP14 SO14 Applications Automotive Industrial Computer Consumer Datasheet - production data Features Description Set-reset capability Static flip-flop operation - retains state indefinitely

More information

1-800-831-4242

1-800-831-4242 Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. DM74LS161A DM74LS163A Synchronous 4-Bit Binary Counters General Description

More information

LM741 Operational Amplifier

LM741 Operational Amplifier Operational Amplifier General Description The LM741 series are general purpose operational amplifiers which feature improved performance over industry standards like the LM709. They are direct, plug-in

More information

74VHC175 Quad D-Type Flip-Flop

74VHC175 Quad D-Type Flip-Flop 74VHC175 Quad D-Type Flip-Flop Features High Speed: f MAX = 210MHz (Typ.) at V CC = 5V Low power dissipation: I CC = 4µA (Max.) at T A = 25 C High noise immunity: V NIH = V NIL = 28% V CC (Min.) Power

More information

DM74LS47 BCD to 7-Segment Decoder/Driver with Open-Collector Outputs

DM74LS47 BCD to 7-Segment Decoder/Driver with Open-Collector Outputs DM74LS47 BCD to 7-Segment Decoder/Driver with Open-Collector Outputs General Description The DM74LS47 accepts four lines of BCD (8421) input data, generates their complements internally and decodes the

More information

HCF4027B DUAL J-K MASTER SLAVE FLIP-FLOP

HCF4027B DUAL J-K MASTER SLAVE FLIP-FLOP DUAL J-K MASTER SLAVE FLIP-FLOP SET RESET CAPABILITY STATIC FLIP-FLOP OPERATION - RETAINS STATE INDEFINETELY WITH CLOCK LEVEL EITHER "HIGH" OR "LOW" MEDIUM-SPEED OPERATION - 16MHz (Typ. clock toggle rate

More information

74F257A Quad 2-line to 1-line selector/multiplexer, non-inverting (3-State)

74F257A Quad 2-line to 1-line selector/multiplexer, non-inverting (3-State) INTEGRATED CIRCUITS Quad 2-line to 1-line selector/multiplexer, non-inverting (3-State) 1995 Mar 31 IC15 Data Handbook Philips Semiconductors Quad 2-line to 1-line selector/multiplexer, non-inverting (3-State)

More information

74HC377; 74HCT377. 1. General description. 2. Features and benefits. 3. Ordering information

74HC377; 74HCT377. 1. General description. 2. Features and benefits. 3. Ordering information Rev. 4 24 February 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is an octal positive-edge triggered D-type flip-flop. The device features clock (CP)

More information

8-stage shift-and-store register LED driver

8-stage shift-and-store register LED driver Rev. 8 4 April 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is an 8-stage serial shift register. It has a storage latch associated with each stage

More information

HCF4081B QUAD 2 INPUT AND GATE

HCF4081B QUAD 2 INPUT AND GATE QUAD 2 INPUT AND GATE MEDIUM SPEED OPERATION : t PD = 60ns (Typ.) at 10 QUIESCENT CURRENT SPECIFIED UP TO 20 5, 10 AND 15 PARAMETRIC RATINGS INPUT LEAKAGE CURRENT I I = 100nA (MAX) AT DD = 18 T A = 25

More information

54LS174,54LS175,DM54LS174,DM54LS175, DM74LS174,DM74LS175

54LS174,54LS175,DM54LS174,DM54LS175, DM74LS174,DM74LS175 54LS174,54LS175,DM54LS174,DM54LS175, DM74LS174,DM74LS175 54LS174 DM54LS174 DM74LS174 54LS175 DM54LS175 DM74LS175 Hex/Quad D Flip-Flops with Clear Literature Number: SNOS290A 54LS174 DM54LS174 DM74LS174

More information

INTEGRATED CIRCUITS. For a complete data sheet, please also download:

INTEGRATED CIRCUITS. For a complete data sheet, please also download: INTEGRATED CIRCUITS DATA SEET For a complete data sheet, please also download: The IC6 74C/CT/CU/CMOS Logic Family Specifications The IC6 74C/CT/CU/CMOS Logic Package Information The IC6 74C/CT/CU/CMOS

More information

74F181 4-Bit Arithmetic Logic Unit

74F181 4-Bit Arithmetic Logic Unit 4-Bit Arithmetic Logic Unit General Description The 74F181 is a 4-bit Arithmetic logic Unit (ALU) which can perform all the possible 16 logic operatio on two variables and a variety of arithmetic operatio.

More information

MM54HC181 MM74HC181 Arithmetic Logic Units Function Generators

MM54HC181 MM74HC181 Arithmetic Logic Units Function Generators MM54HC181 MM74HC181 Arithmetic Logic Units Function Generators General Description These arithmetic logic units (ALU) function generators utilize advanced silicon-gate CMOS technology They possess the

More information

HCF4017B DECADE COUNTER WITH 10 DECODED OUTPUTS

HCF4017B DECADE COUNTER WITH 10 DECODED OUTPUTS DECADE COUNTER WITH 10 DECODED OUTPUTS MEDIUM SPEED OPERATION : 10 MHz (Typ.) at V DD = 10V FULLY STATIC OPERATION STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT CURRENT SPECIFIED UP TO 20V

More information

DM74184 DM74185A BCD-to-Binary and Binary-to-BCD Converters

DM74184 DM74185A BCD-to-Binary and Binary-to-BCD Converters DM74184 DM74185A BCD-to-Binary and Binary-to-BCD Converters General Description These monolithic converters are derived from the 256-bit read only memories DM5488 and DM7488 Emitter connections are made

More information

12-stage shift-and-store register LED driver

12-stage shift-and-store register LED driver Rev. 9 18 April 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a 12-stage serial shift register. It has a storage latch associated with each stage

More information

LM1036 Dual DC Operated Tone/Volume/Balance Circuit

LM1036 Dual DC Operated Tone/Volume/Balance Circuit LM1036 Dual DC Operated Tone/Volume/Balance Circuit General Description The LM1036 is a DC controlled tone (bass/treble), volume and balance circuit for stereo applications in car radio, TV and audio systems.

More information

Features. Instruction. Decoder Control Logic, And Clock Generators. Address Compare amd Write Enable. Protect Register V PP.

Features. Instruction. Decoder Control Logic, And Clock Generators. Address Compare amd Write Enable. Protect Register V PP. February 1999 NM9366 (MICROWIRE Bus Interface) 4096-Bit Serial EEPROM General Description The NM9366 devices are 4096 bits of CMOS non-volatile electrically erasable memory divided into 256 16-bit registers.

More information

MM74HC74A Dual D-Type Flip-Flop with Preset and Clear

MM74HC74A Dual D-Type Flip-Flop with Preset and Clear MM74HC74A Dual D-Type Flip-Flop with Preset and Clear Features Typical propagation delay: 20ns Wide power supply range: 2V 6V Low quiescent current: 40µA maximum (74HC Series) Low input current: 1µA maximum

More information

. HIGH SPEED .COMPATIBLE WITH TTL OUTPUTS . LOW POWER DISSIPATION .OUTPUT DRIVE CAPABILITY M74HCT651 M74HCT652

. HIGH SPEED .COMPATIBLE WITH TTL OUTPUTS . LOW POWER DISSIPATION .OUTPUT DRIVE CAPABILITY M74HCT651 M74HCT652 M74HCT651 M74HCT652 HCT651 OCTAL BUS TRANSCEIVER/REGISTER (3-STATE, INV.) HCT652 OCTAL BUS TRANSCEIVER/REGISTER (3-STATE). HIGH SPEED fmax = 60 MHz (TYP.) AT VCC =5V.COMPATIBLE WITH TTL OUTPUTS V IH =

More information

HEF4021B. 1. General description. 2. Features and benefits. 3. Ordering information. 8-bit static shift register

HEF4021B. 1. General description. 2. Features and benefits. 3. Ordering information. 8-bit static shift register Rev. 10 21 March 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is an (parallel-to-serial converter) with a synchronous serial data input (DS), a clock

More information