Amphenol. Amphenol-Tuchel Electronics GmbH. Circular Connectors C 091 A/B/D Series

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Amphenol. Amphenol-Tuchel Electronics GmbH. Circular Connectors C 091 A/B/D Series"

Transcription

1 Amphenol Amphenol-Tuchel Electronics GmbH Circular Connectors C 09 A/B/D Series

2 Amphenol

3 Content Page Remarks / Safety classification IP Codes C 09 A C 09 B Circular connectors with metal screw coupling and plastic back shell. Wire strain relief is metal half shell construction for shielding. Contact positions in to 8, and. Circular connectors with plastic bayonet coupling and back shell. Wire strain relief is metal half shell construction for shielding. Contact positions in to 8, and. Wire strain relief available in plastic. C 09 D Circular connectors with metal screw coupling and back shell. Wire strain relief is metal shell construction for shielding. Contact positions in to 8, and. Crimp contacts 6 Accessories Summary of Part Numbers 8 Amphenol

4 C 09 Remarks Safety classification. General Remarks These connectors are designed and produced in conformity with the low voltage directive (//EWG) respectively Gerätesicherheitsgesetz (German law). We reserve the right to change the design due to improvement in quality, development or production requirements. These connectors and/or plug and socket devices are designed and produced according to DIN VDE 6. All technical data refer to mated connectors under live conditions. The safety of the connector system depends on the correct selection of products, proper assembly of the connector device, and a precise fit of the connectors.. Application Remarks Connectors and/or plug and socket devices must be used according to specified technical ratings. The technical data represent the initial value of mated parts under predetermined conditions and length of time.these values could change with different test parameters or product requirements. The C 09 Series connectors are used in a wide variety of industries and equipment. Some of these include industrial machines and controls, data processing, instrumentation and test equipment, medical devices, telecommunication s network and equipment, plus outdoor and marine applications. All rated data for the connectors listed in this catalog are based on over-voltage category and pollution degree for electronic applications. Connectors were completely mated according to their respective safety locking mechanism. Selection and testing of connectors and/or plug and socket devices to meet specific product or industrial requirements such as rated voltage and the related clearances and creepage distances are the responsibility of the user.. Assembling Remarks Certain appliances and equipment include protective measures that relate to the coupling devices of the male and female receptacle housings. (see also DIN VDE 000 part 0; IEC 606--). Care must be taken to insure the parts are correctly mated and screws are tightened with the proper torque.. Termination Remarks Cable connectors are effectively secured when using the internal cable clamp. When the connector contains a simple gland bushing for retention the cable should have a strain relief close behind the connector. All cable properties or specifications must be compatible with the connector design and materials. Designated wire conductors must be terminated to the correct poles in the connector. Crimp contacts must be fully inserted into the plastic housing and retention assured with a slight tug on the wire. Wire should be stripped correctly according to printed specifications to ensure no electrical contact can be made between the conductors. There should be no nicked or cut strains during the stripping action.. Safety Classification acc. to DIN VDE 06 Style Safety classification ) A B C Connectors free fixed Protective earth contact with without Protection against electric shock mated unmated Cable clamp with without Male cable connector Female cable connector Male receptacle Female receptacle ) A Connections to and from a device equipment B Connections within a device equipment C Free cable connections Amphenol

5 C 09 IP Codes (Ingress Protection) Degree of protection Electrical devices to which connectors belong have to be protected for safety reasons from outside influences like dust, foreign objects, direct contact, moisture and water. This protection is provided on industrial connectors by their housings with their latching devices and sealed cable entries. The degree of protection can be selected depending on the type of intended use. The standard IEC 609 and/or DIN EN 609 has specified the degree of protection and divided into several classes. The degree of protection is indicated in the following way: IP 6 Code letters (Ingress Protection) st charact. numeral (degree of protection against access to hazardous parts and against solid foreign objects) nd charact. numeral (degree of protection against ingress of water) The following charts give an overview about all protection degrees. st charact. Brief description Definition numeral 0 Non-protected 6 Protected against access to hazardous parts with the back of a hand. Protected against solid foreign objects of ³0mm. Protected against access to hazardous parts with a finger. Protected against solid foreign objects of ³.mm. Protected against access to hazardous parts with a tool. Protected against solid foreign objects of ³.mm. Protected against access to hazardous parts with a wire.protected against solid foreign objects of ³mm. Protected against access to hazardous parts with a wire. Dust-protected. Protected against access to hazardous parts with a wire. Dust-tight. The probe, sphere of 0mm, shall not fully penetrate and shall have adequate clearance from hazardous parts. The jointed test finger of mm, 80mm length, shall have adequate clearance from hazardous parts. The probe, sphere of.mm, shall not fully penetrate. The probe of.mm shall not penetrate at all. The probe of mm shall not penetrate at all. The probe of mm shall not penetrate. Intrusion of dust is not totally prevented, but dust shall not penetrate in a quantity to interfere with satisfactory operation of the device or to impair safety. The probe of mm shall not penetrate. No intrussion of dust. nd charact. Brief description Definition numeral 0 Non-protected K ) Protected against vertically falling water drops Protected against vertically falling water drops when enclosure tilted up to Protected against spraying water Protected against splashing water Protected against water jets Protected against powerful water jets Protected against the effects of temporary immersion in water Protected against the effects of continous immersion in water Protected against water during high pressure/steam jet cleaning Vertically falling drops shall have no harmful effects. Vertically falling drops shall have no harmful effects when the enclosure is tilted at any angle up to on either side of the vertical. Water sprayed at an angle up to 60 on either side of the vertical shall have no harmful effects. Water splashed against the enclosure from any direction shall have no harmful effects. Water projected in jets against the enclosure from any direction shall have no harmful effects. Water projected in powerful jets against the enclosure from any direction shall have no harmful effects. Intrusion of water in quantities causing harmful effects shall not be possible when the enclosure is temporally immersed in water for 0 min. in m depth. Intrusion of water in quantities causing harmful effects shall not be possible when the enclosure is continuously immersed in water under conditions which shall be agreed between manufacturer and user but which are more severe than for numeral. Water projected in powerful jets with high pressure against the enclosure from any direction shall have no harmful effects. ) Remark: Numeral acc. to DIN 000 part 9, vehicles IP code Amphenol

6 6 Amphenol

7 C 09 A Main Features Metal threaded coupling acc. to IEC 0-9. Number of contacts are to 8, and. Internal metal strain relief with half shell construction and snap-in latching. Complete EMI shielding in fully mated and locked position. Male and female cable connectors: solder in to 8,, positions; crimp in to 8 positions; cable outlet PG for diameter of 6 mm; cable outlet PG 9 for diameters of 6. mm and 8 mm; cable entry straight or right-angled; metal coupling nickel plated or plastic coated. Male and female receptacles for panel mount: front or rear mounting; solder in to 8,, positions; crimp in to 8 positions; PCB mounting, straight and right-angled, using dip solder termination with multiple tail lengths. Coloured back-shells for coding, see page The connectors are registered under File # E 6 09 UL. UNDERWRITERS LABORATORIES INC. Amphenol

8 8 Amphenol

9 C 09 A Characteristics General Characteristics Standard Characteristics Number of contacts + Stereo 6 8 View on termination side of contact insert M K J G H E F L O N A B C D M K J G H E F L O N A B C D Contact arrangement acc. to DIN Contact arrangement acc. to IEC Electrical Characteristics Rated voltage Rated impulse withstand voltage Pollution degree Installation category Insulation group Test voltage Current rating Insulation resistance Contact resistance Climatical Characteristics Climatic category Temperature range Mechanical Characteristics IP-degree Insertion and withdrawal forces Mechanical operation Materials Housing material Dielectric material Contact plating Further Characteristics Termination technique Wire gauge Flammability Locking system N 90.oz 0 N 0.oz C C / - 0 F F Amphenol 9 N.oz 0 / 8 / 6 0 N 80.oz IP 0 N 0.oz Silver ³ 00 mating cycles Gold ³ 000 mating cycles IEC V ~ 00 V ~ 00 V ~ 00 V ~ 0 V ~ IEC V 0 V 00 V 0 V IEC IEC IEC I IEC V ~ 60 V ~ 980 V ~ 60 V ~ IEC 60- Test b A / + 0 C / + 0 F A / + 0 C / + 0 F IEC 60- Test a > 0 ½ IEC 60- < m ½ Test a IEC IEC IEC 609 IEC 60- Test b IEC 60- Test 9 a IEC N.oz coupling ring brass, strain relief, die cast, nickel plated thermoplastic silver plated / gold plated * solder, crimp solder ² 0, mm (-6 AWG), crimp 0, 0, mm (6-8 AWG) UL 9 V0 metal screw coupling Characteristics Do not connect or disconnect under load. Metal housing parts shall be securely incorporated to protected ground. * Remark for gold plated contacts In order to avoid brittle inter-metallic connections, gold-plated terminals have to be tin-plated in the solder area. 0 N 80.oz solder ² 0, mm / AWG

10 C 09 A Male cable connector, screw locking, straight Cable outlet 6 mm Cable outlet 8 mm Cable outlet 6. mm Cable outlet 6 mm Male cable connector, max. cable outlet 6 mm, Male cable connector, max. cable outlet 8 mm, Male cable connector, max. cable outlet 6. mm, Male cable connector, max. cable outlet 6 mm, solder termination, plastic coated coupling ring, contact plating: silver. 6, (.68) 6 (.), (.) (.08) PG 9 6 (.) (.08) PG 6, (.68), (.) (DIA.60) (DIA.60) (DIA.60) (DIA.88) S DIN DIN S DIN DIN S DIN DIN S DIN DIN Contact plating Contact plating silver gold ) T 0 00 T T T T T T 00 T 8 00 T 0 00 T 6 00 T T 0 00 T T T T 60 0 T T 00 T 8 00 T 0 00 T 0 00 T T T T 6 00 T T 00 T 8 00 T 0 00 T 0 0 T 60 0 T 00 0 T 60 0 T 60 0 T 00 0 T 0 T 8 0 ) T 0 0 ) Please order crimp contacts separately, see page 6 ) see remark page 9 ) Available upon request. T 0 08 T T T T 6 08 ) T T 08 T 8 08 ) T 0 08 T T T 0 08 T T T T 6 08 ) T T 08 T 8 08 T 0 08 T 6 00 T T 0 08 T T T T 6 08 ) T T 08 T 8 08 T 0 08 T 6 00 T Part Number Crimp termination ) T 60 T 00 T 60 T 6 T 00 T T 8 T 0 T 60 T 00 T 60 T 6 T 00 T T 8 T 0 ) T 60 T 00 ) T 60 ) T 6 T 00 ) T ) T 8 ) T 0 0 Amphenol

11 C 09 A Male cable connector, screw locking, right-angled Male cable connector, T 0 00 right-angled, T max. cable outlet 6 mm, 6 (.) T S DIN DIN T T 6 00 T T 00 T 8 00 T 0 00 (DIA.60) T 6 00 T ) Please order crimp contacts separately, see page 6 ) See remark page 9 ) Available upon request. 6 (.) Contact plating Contact plating silver gold ) T ) T ) T T 6 08 ) T T 08 ) T 8 08 ) T 0 08 ) T 6 08 T Part Number Crimp termination ) T 60 0 T 00 0 ) T 60 0 T 6 0 ) T 00 0 T 0 ) T 8 0 ) T 0 0 ) Assembling instruction male cable connector, max. cable outlet 6 mm Assembling instruction male cable connector, max. cable outlet 6. mm or 8 mm 8 8,,,, Assembling instruction male cable connector, right-angled g,, Amphenol

12 C 09 A Female cable connector, screw locking, straight Cable outlet 6 mm Cable outlet 8 mm Cable outlet 6. mm Cable outlet 6 mm Female cable connector, max. cable outlet 6 mm, Female cable connector, max. cable outlet 8 mm, Female cable connector, max. cable outlet 6. mm, Female cable connector, max. cable outlet 6 mm, solder termination, plastic coated coupling ring, contact plating: silver. 68 (.66) 6 (.) (.), (.06) PG 9 6 (.), (.06) PG 68 (.66) (.) (DIA.60) (DIA.60) (DIA.60) (DIA.88) S DIN DIN S DIN DIN S DIN DIN S DIN DIN Contact plating Contact plating silver gold ) T 00 T 6 00 T 0 00 T 6 00 T 6 00 T 0 00 T 6 00 T 8 00 T 0 00 T T 6 00 T 00 T 6 00 T 0 00 T 6 00 T 6 0 T 0 00 T 6 00 T 8 00 T 0 00 T 6 00 T 0 00 T 6 00 T 00 T 0 00 T 6 00 T 8 00 T 0 00 T 0 T 6 0 T 0 0 T 6 0 T 6 0 T 0 0 T 6 0 T 8 0 T 0 0 ) Please order crimp contacts separately, see page 6 ) See remark page 9 ) Available upon request. T 08 T 6 08 T 0 08 T 6 08 T 08 ) T 0 08 T 6 08 T 8 08 T 0 08 T T T 08 T 6 08 T 0 08 T 6 08 T 08 ) T 0 08 T 6 08 T 8 08 T 0 08 T T 6 00 T 6 08 T 0 08 T 6 08 ) T 08 ) T 0 08 T 6 08 T 8 08 T 0 08 T T 6 00 Part Number Crimp termination ) T 6 T 0 T 6 T T 0 T 6 T 8 ) T 0 T 6 ) T 0 ) T 6 T ) T 0 ) T 6 T 8 ) T 0 ) T 6 ) T 0 T 6 ) T T 0 ) T 6 ) T 8 ) T 0 Amphenol

13 C 09 A Female cable connector, screw locking, right-angled Female cable connector, T 00 right-angled, T 6 00 max. cable outlet 6 mm, 6 (.) T 0 00 S DIN DIN T 6 00 T 00 T 0 00 T 6 00 T 8 00 (DIA.60) T 0 00 T T 6 00 ) Please order crimp contacts separately, see page 6 ) See remark page 9 ) Available upon request. (.60) Contact plating Contact plating silver gold ) T 6 08 ) T 0 08 ) T 6 08 ) T 08 T 0 08 T 6 08 ) T 8 08 ) T 0 08 ) T T 6 08 ) Part Number Crimp termination ) T 6 0 ) T 0 0 ) T 6 0 ) T 0 ) T 0 0 T 6 0 ) T 8 0 ) T 0 0 ) Assembling instruction female cable connector, max. cable outlet 6 mm g Assembling instruction female cable connector, max. cable outlet 6. mm or 8 mm g 8 8,,,, Assembling instruction female cable connector, right-angled g,, Amphenol

14 C 09 A max.mm max. mm 8 +0, (.09) screw locking, front mounting +0, 9, (.) Panel cutout +0,,8 (.0) panel mounting with ring or hex nut, termination: straight dip solder, pin length mm from flange, panel mounting with ring nut, contact plating: silver or gold, solder area: tin plated. termination: straight dip solder, pin length 9 mm from flange, panel mounting with ring nut, contact plating: silver, solder area: tin plated. termination: straight dip solder, pin length mm from flange, panel mounting with ring nut, contact plating: silver, solder area: tin plated. M8x0, (.), (.) (.00) (DIA.88) 6 (.60) *Measure - and -pol.=± 0, M8x0, (DIA.88) (.600) *Measure - and -pol. Ø 0,6 (.) M8x0, (.) M8x0, (.), (.) (.), (.) 9 (.8) (.), (.) (.9) (.00) (.00) (DIA.88) (.00) (DIA.88) S DIN DIN S DIN DIN S DIN DIN S DIN DIN T 000 T T T T 6 00 T T T T T T T 6 00 T 0 00 T 6 00 T 9 00 T 0 00 T 8 00 T 8 00 T 0 00 T 6 T 0 T 6 T 9 T 0 T 8 T 8 T 0 T 6 0 T 0 0 T 6 0 T 9 0 T 0 0 T 8 0 T 8 0 T 0 0 Contact plating silver ring nut hex nut ) Please order crimp contacts separately, see page 6 ) See remark page 9 ) Available upon request. T 009 T T T T T T T T T T Contact plating gold ) ring nut T 08 T 6 08 T 0 08 T 6 08 T 9 08 T 0 08 T 8 08 T 8 08 ) T 0 08 T T 6 00 T 68 0 T 6 0 Part No. Crimp termination ) ring nut T 6 0 ) T 0 0 T 6 0 T 9 0 T 0 0 T 8 0 T 8 0 ) T 0 0 ) Amphenol

15 C 09 A max.,mm mm 8 +0, (.09) screw locking, rear mounting +0, 9, (.) Panel cutout +0,,8 (.0) panel mounting with ring or hex nut, termination: straight dip solder, pin length 0. mm from flange, panel mounting with ring nut, contact plating: silver or gold, solder area: tin plated. termination: straight dip solder, pin length. mm from flange, panel mounting with ring nut, contact plating: silver, solder area: tin plated. termination: straight dip solder, pin length 9. mm from flange, panel mounting with ring nut, contact plating: silver, solder area: tin plated. (DIA.88) (.) (.00), (.), (.8) *Measure M b - i and -pol.=0±0, d l 0 (DIA.88) 0, (.) S DIN DIN S DIN DIN S DIN DIN S DIN DIN T 00 T 6 00 T 0 00 T 6 00 T 9 00 T 0 00 T 8 00 T 8 00 T 0 00 T T 6 00 T 00 T 6 00 T 0 00 T 6 00 T 9 00 T 0 00 T 8 00 T 8 00 T 0 00 T 6 T 0 T 6 T 9 T 0 T 8 T 8 T 0 T 6 0 T 0 0 T 6 0 T 9 0 T 0 0 T 8 0 T 8 0 T 0 0 Contact plating silver ring nut hex nut ) Please order crimp contacts separately, see page 6 ) See remark page 9 ) Available upon request. M8x0, (.00), (.), (.8) *Measure - and -pol. Ø 0,6 (.) (DIA.88) (.) (DIA.88), (.0) 9, (.6), (.8), (.8) M8x0, (.00) (.00) M8x0,, (.) M8x0,, (.) T 09 T 6 09 ) T 0 09 ) T 6 09 T 9 09 T 0 09 T 8 09 ) T 8 09 ) T 0 09 T ) T 6 09 ) Contact plating gold ) ring nut T 6 8 ) T 0 8 T 6 8 ) T 9 8 ) T 0 8 ) T 8 8 T 8 8 T 0 8 T 68 0 T 6 8 T 68 0 T 6 0 Part No. Crimp termination ) ring nut T 6 0 ) T 0 0 T 6 0 T 9 0 T 0 0 T 8 0 T 8 0 ) T 0 0 Amphenol

16 C 09 A 8 +0, (.09) screw locking, right-angled +0, 9, (.) Panel cutout +0,,8 (.0) right-angled, PCB mounting, contact plating: gold, solder area: tin plated.,6 ±0, (.06) ) *A Best.-Nr ,...8,8 (.0) 8, (DIA.8) S DIN DIN PCB-layout 8, ±0, (.) ±0, (.06) Contact plating silver (x), +0, (DIA.6) Contact plating gold ) T 6... ) T 0... ) 6 Part Number Crimp termination ) Pol. 6 Pol. ±0,0 (x) (.8) ±0,, (.) 8, ±0, (.) ±0, (.06) (x), (DIA.6) ±0,0 (x) (.8) ±0,, (.) +0,, (.9), (.86) (.9) ±0,0 (.) (x) (DIA.0), ±0,0 (.), +0, +0, ±0,0 (.) (6x), (DIA.0), ±0,0 (.) right-angled, rear mounting, panel mounting with ring nut, contact plating: gold, solder area: tin plated. PCB-layout 6 (.60), (.060) (.) Pol., (.8), (.) M8x0, (.00) 0,8 (.0) (DIA.88) +0, (x) S DIN DIN T 6 90 T Pol. 0,8 +0, (6x) (.0) g ±0,0 (.8) ±0,0 (x) (.8) ±0,0 (.8) 6 ±0,0 (x) (.8) 6 Amphenol ) Please order crimp contacts separately, see page 6 ) see remark page 9

17 C 09 A 8 +0, (.09) screw locking, right-angled +0, 9, (.) Panel cutout +0,,8 (.0) right-angled, PCB mounting, contact plating: silver. Hole pattern on PCB, (.09), (.), 6,8 (.6), (.0) (.), (.9) (.00), (.9) (.9), (.) M8x0, S DIN DIN Contact plating silver T T T T Contact plating gold ) Part Number Crimp termination ) 0, (.98) (.9), (.0), (.09) 0 (.9) 6 Pol. Pol., (.098) (.9) 0, (.98) 0 (.9) 8 6, (.09) 0, (.98), (.098) 0, (.98), (.098) (DIA.88) 0 Pol. Stere POL Pol. Stereo (.9), (.0), (.09) (.9) (.9), (.098), (.0) 8 Pol. 8 Pol. (.9) (.9) (.9) (.9) (.9) ) Please order crimp contacts separately, see page 6 ) see remark page 9 Amphenol

18 C 09 A max.,mm max., mm 8 +0, (.09) Male receptacle, screw locking, front mounting +0, 9, (.) Panel cutout +0,,8 (.0) Male receptacle, T 000 8, (.) T panel mounting with ring or hex nut, T (.00) 6, (.6) 6 (.60) S DIN DIN T T 6 00 T T 000 T T T 6 00 T 6 00 Male receptacle, 0, termination: straight dip solder, (.) T 6 00 pin length 0. mm from flange, panel mounting with ring nut, (.00) T 0 00 ) S DIN T 6 00 ) T 8 00 ) T 0 00 ) T 00 ), (.) DIN T ) 6, T (.6) ) 6 (.60) ) Please order crimp contacts separately, see page 6 ) see remark page 9 ) Available upon request. M8x0, M8x0, (DIA.88) (DIA.88) Contact plating silver ring nut hex nut T 009 T T T T T T 009 T T T T Contact plating gold ) ring nut T 08 T 6 08 T 0 08 T 6 08 T 8 08 ) T 0 08 T 08 T T T T T 6 0 ) T 6 0 Part No. Crimp termination ) ring nut T 6 0 T 0 0 T 6 0 T 8 0 ) T 0 0 T 0 T 86 0 ) T 06 0 ) 8 Amphenol

19 C 09 A max.,mm mm 8 +0, (.09) Male receptacle, screw locking, rear mounting +0, 9, (.) Panel cutout +0,,8 (.0) Male receptacle, panel mounting with ring nut, Male receptacle, termination: straight dip solder, pin length 6 mm from flange, panel mounting with ring nut,, (.) (DIA.88) (DIA.88), (.) (.00), (.) 6 (.60) 6 (.6) (.00), (.) 6 (.60) S DIN DIN S DIN DIN T 00 T 6 00 T 0 00 T 6 00 T 8 00 T 0 00 T 00 T T T 6 00 T 0 00 ) T 6 00 T 8 00 ) T 0 00 ) T 00 T ) T ) ) Please order crimp contacts separately, see page 6 ) see remark page 9 ) Available upon request. M8x0, M8x0, Contact plating silver ring nut hex nut Contact plating gold ) ring nut T 6 00 T 6 00 T 6 0 T 6 0 Part No. Crimp termination ) ring nut T 6 0 ) T 0 0 ) T 6 0 T 8 0 ) T 0 0 ) T 0 ) T 86 0 ) T 06 0 ) Amphenol 9

20 C 09 A PCB-Layout PCB-layout These hole patterns on PCB are valid for all receptacles with straight dip solder pins. POL DIN,0 POL IEC0-9,6,,,,8, 6, POL DIN 6,06 POL STEREO DIN,0,,,,, 6 POL DIN 6,06 POL,0, 6,,, 6 6,06, POL N 9 DIN 9,9 8 POL DIN N 6 6,9,9, 6,,9, 8 6 0,,,0,0 Pol. POL,0 9,0 Pol. POL,0 9,0, 0 G H J M K F A L D E,0 8,0, 0 G H J M K N O L A F E D,0 8,0 B C B C 0,8 0,8 6,0, 6,0 Amphenol

21 C 09 B Main Features Bayonet locking. Number of contacts are to 8, and. Internal metal strain relief with half shell construction and snap-in latching. Plastic strain relief also available. Complete EMI shielding in fully mated and locked position. Male and female cable connectors: solder in to 8,, positions; crimp in to 8 positions; cable outlet PG for diameter of 6 mm; cable outlet PG 9 for diameters of 6. mm and 8 mm; cable entry straight or right-angled. Male and female receptacles for panel mount: front mounting; solder in to 8,, positions; crimp in to 8 positions; PCB mounting in right-angled, vertical mounting upon request, using dip solder termination. Colored back-shells for coding, see page. The connectors are registered under File # E 6 09 UL. UNDERWRITERS LABORATORIES INC. Amphenol

22 Amphenol

23 C 09 B Characteristics General Characteristics Standard Characteristics Number of contacts Stereo 6 8 View on termination side of contact insert M K J G H E F L O N A B C D M K J G H E F L O N A B C D Contact arrangement acc. to DIN Contact arrangement acc. to IEC Electrical Characteristics Rated voltage Rated impulse withstand voltage Pollution degree Installation category Insulation group Test voltage Current rating Insulation resistance Contact resistance Climatical Characteristics Climatic category Temperature range Mechanical Characteristics IP-degree Insertion and withdrawal forces Mechanical operation Materials Housing material Dielectric material Contact plating Further Characteristics Termination technique Wire gauge Flammability Locking system IEC N 90.oz - 0 C C / - 0 F F Characteristics Do not connect or disconnect under load. Metal housing parts shall be securely incorporated to protected ground. * Remark for gold plated contacts In order to avoid brittle inter-metallic connections, gold-plated terminals have to be tin-plated in the solder area. 0 N 0.oz Amphenol N.oz 0 / 8 / 6 0 N 80.oz IP 0 N 0.oz Silver ³ 00 mating cycles Gold ³ 000 mating cycles die cast, nickel plated thermoplastic silver plated / gold plated * solder, crimp solder ² 0, mm (-6 AWG), crimp 0, 0, mm (6-8 AWG) IEC V ~ 00 V ~ 00 V ~ 0 V ~ IEC V 0 V 00 V 0 V IEC IEC IEC I IEC V ~ 60 V ~ 980 V ~ 60 V ~ IEC 60- Test b A / + 0 C / + 0 F A / + 0 C / + 0 F IEC 60- Test a > 0 ½ IEC 60- < m ½ Test a IEC IEC 609 IEC 60- Test b IEC 60- Test 9 a UL 9 V0 bayonet 60 N.oz 0 N 80.oz solder ² 0, mm / AWG

24 C 09 B Male cable connector, bayonet locking inside cable outlet 6 mm cable outlet 8 mm cable outlet 6. mm right-angled Male cable connector, max. cable outlet 6 mm, Male cable connector, max. cable outlet 8 mm, Male cable connector, max. cable outlet 6. mm, Male cable connector, right-angled, max. cable outlet 6 mm, 6, (.68) 6 (.), (.) (.08) S DIN DIN S DIN DIN S DIN DIN S DIN DIN Contact plating Contact plating silver gold ) T 0 T 0 T 0 T 9 0 T 0 T 0 T 0 T 0 T 6 0 T 6 0 T 0 T 0 T 0 T 9 0 T 0 T 0 T 0 ) T 0 T 6 0 T 6 0 T 0 ) T 0 ) T 0 T 9 0 ) T 0 ) T 0 ) T 0 ) T 0 ) T 6 0 ) T 6 0 ) T 00 T 00 T 00 T 9 00 T 00 T 00 T 00 ) T 00 T 6 00 T 6 00 ) Please order crimp contacts separately, see page 6 ) see remark page ) Available upon request. PG 9 6 (.) (.08) PG 6, (.9) (DIA.88) (DIA.88) (DIA.88) (DIA.88) 6 (.) T 8 T 8 T 8 T 9 8 T 8 T 8 ) T 8 ) T 8 ) T 6 8 ) T 6 8 T 8 ) T 8 ) T 8 ) T 9 8 ) T 8 ) T 8 ) T 8 ) T 8 T 6 8 ) T 6 8 ) T 8 ) T 8 ) T 8 ) T 9 8 ) T 8 ) T 8 ) T 8 ) T 8 T 6 8 ) T 6 8 ) T 08 T 08 T 08 T 9 08 ) T 08 ) T 08 ) T 08 ) T 08 ) T 6 08 ) T 6 08 ) Part Number Crimp termination ) T T T T 9 T T T ) T T T T T 9 ) T T T ) T ) T ) T ) T ) T 9 ) T ) T ) T ) T ) T 0 ) T 0 ) T 0 T 9 0 ) T 0 T 0 ) T 0 ) T 0 ) Amphenol

25 C 09 B Male cable connector, bayonet locking inside, assembling instructions Male cable connector, max. cable outlet 6 mm 8,, Male cable connector, max. cable outlet 6. mm or 8 mm 8,, Male cable connector, right-angled,, Amphenol

26 C 09 B Male cable connector, bayonet locking outside cable outlet 6 mm cable outlet 8 mm cable outlet 6. mm Male cable connector, max. cable outlet 6 mm, Male cable connector, max. cable outlet 8 mm, Male cable connector, max. cable outlet 6. mm, 6, (.68) 6 (.), (.) (.08) S DIN DIN S DIN DIN S DIN DIN ) Please order crimp contacts separately, see page 6 ) see remark page ) Available upon request. PG 9 6 (.) (.08) PG (DIA.88) (DIA.88) (DIA.88) Contact plating Contact plating silver gold ) T 9 0 T 9 8 ) T 9 0 T 9 8 ) T 9 0 T 9 8 ) T 99 0 T 99 8 ) T 9 0 T 9 8 ) T 9 0 T 9 8 ) T 9 0 ) T 9 8 ) T 9 0 ) T 9 8 ) T 69 0 ) T 69 8 ) T 69 0 ) T 69 8 ) T 9 0 T 9 8 ) T 9 0 T 9 8 ) T 9 0 T 9 8 ) T 99 0 T 99 8 ) T 9 0 T 9 8 ) T 9 0 T 9 8 ) T 9 0 ) T 9 8 ) T 9 0 T 9 8 ) T 69 0 ) T 69 8 ) T 69 0 ) T 69 8 ) T 9 0 ) T 9 8 ) T 9 0 ) T 9 8 ) T 9 0 ) T 9 8 ) T 99 0 ) T 99 8 ) T 9 0 ) T 9 8 ) T 9 0 ) T 9 8 ) T 9 0 ) T 9 8 ) T 9 0 ) T 9 8 ) T 69 0 ) T 69 8 ) T 69 0 T 69 8 Part Number Crimp termination ) T 9 T 9 T 9 T 99 ) T 9 T 9 T 9 ) T 9 ) T 9 T 9 T 9 T 99 ) T 9 T 9 T 9 ) T 9 ) T 9 ) T 9 ) T 9 ) T 99 ) T 9 ) T 9 ) T 9 ) T 9 ) 6 Amphenol

27 C 09 B Male cable connector, bayonet locking outside, assembling instructions Male cable connector, max. cable outlet 6 mm 8,, Male cable connector, max. cable outlet 6. mm or 8 mm 8,, Amphenol

28 C 09 B Female cable connector, bayonet locking inside cable outlet 6 mm cable outlet 8 mm cable outlet 6. mm right-angled Female cable connector, max. cable outlet 6 mm, Female cable connector, max. cable outlet 8 mm, Female cable connector, max. cable outlet 6. mm, Female cable connector, right-angled, max. cable outlet 6 mm, 68 (.66) 6 (.) (.), (.06) S DIN DIN S DIN DIN S DIN DIN S DIN DIN T 0 T 0 T 0 T 9 0 ) T 0 T 0 T 0 ) T 0 ) T 6 0 ) T 6 0 ) T 0 T 0 T 0 T 9 0 ) T 0 T 0 T 0 ) T 0 ) T 6 0 ) T 6 0 T 0 ) T 0 ) T 0 ) T 9 0 ) T 0 ) T 0 ) T 0 ) T 0 ) T 6 0 ) T 6 0 ) T 00 T 00 T 00 T 9 00 T 00 T 00 T 00 ) T 00 ) T 6 00 T 6 00 ) Please order crimp contacts separately, see page 6 ) see remark page ) Available upon request. PG 9 6 (.), (.06) PG 6, (.9) (DIA.88) (DIA.88) (DIA.88) (DIA.88), (.9) Contact plating Contact plating silver gold ) T 8 ) T 8 ) T 8 ) T 9 8 ) T 8 ) T 8 ) T 8 ) T 8 ) T 6 8 ) T 6 8 ) T 8 ) T 8 ) T 8 ) T 9 8 ) T 8 ) T 8 ) T 8 ) T 8 ) T 6 8 ) T 6 8 ) T 8 ) T 8 ) T 8 ) T 9 8 ) T 8 ) T 8 ) T 8 ) T 8 ) T 6 8 ) T 6 8 ) T 08 ) T 08 ) T 08 ) T 9 08 ) T 08 ) T 08 ) T 08 ) T 08 ) T 6 08 ) T 6 08 ) Part Number Crimp termination ) T T T T 9 ) T T T ) T ) T T T T 9 ) T T T ) T ) T ) T ) T ) T 9 ) T ) T ) T ) T ) T 0 ) T 0 ) T 0 ) T 9 0 ) T 0 ) T 0 ) T 0 ) T 0 8 Amphenol

29 C 09 B Female cable connector, bayonet locking inside, assembling instructions Female cable connector, max. cable outlet 6 mm 8,, Female cable connector, max. cable outlet 6. mm or 8 mm 8,, Female cable connector, right-angled,, Amphenol 9

30 C 09 B Female cable connector, bayonet locking outside cable outlet 6 mm cable outlet 8 mm cable outlet 6. mm Female cable connector, max. cable outlet 6 mm, Female cable connector, max. cable outlet 8 mm, Female cable connector, max. cable outlet 6. mm, 68 (.66) 6 (.) (.) (.6) S DIN DIN S DIN DIN S DIN DIN ) Please order crimp contacts separately, see page 6 ) see remark page ) Available upon request. PG 9 6 (.) (.6) PG (DIA.88) (DIA.88) (DIA.88) Contact plating Contact plating silver gold ) T 8 0 T 8 8 T 8 0 T 8 8 T 8 0 T 8 8 T 98 0 T 98 8 T 8 0 T 8 8 T 8 0 T 8 8 ) T 8 0 ) T 8 8 ) T 8 0 T 8 8 ) T 68 0 ) T 68 8 ) T 68 0 ) T 68 8 ) T 8 0 T 8 8 ) T 8 0 T 8 8 ) T 8 0 T 8 8 ) T 98 0 ) T 98 8 ) T 8 0 T 8 8 ) T 8 0 T 8 8 ) T 8 0 ) T 8 8 ) T 8 0 T 8 8 ) T 68 0 ) T 68 8 ) T 68 0 ) T 68 8 ) T 8 0 ) T 8 8 ) T 8 0 ) T 8 8 ) T 8 0 ) T 8 8 ) T 98 0 ) T 98 8 ) T 8 0 ) T 8 8 ) T 8 0 ) T 8 8 ) T 8 0 ) T 8 8 ) T 8 0 ) T 8 8 ) T 68 0 ) T 68 8 ) T 68 0 ) T 68 8 ) Part Number Crimp termination ) T 8 T 8 T 8 T 98 ) T 8 T 8 T 8 ) T 8 T 8 T 8 T 8 T 98 ) T 8 T 8 T 8 ) T 8 ) T 8 ) T 8 ) T 8 ) T 98 ) T 8 ) T 8 ) T 8 ) T 8 ) 0 Amphenol

31 C 09 B Female cable connector, bayonet locking outside, assembling instructions Female cable connector, max. cable outlet 6 mm 8,, Female cable connector, max. cable outlet 6. mm or 8 mm 8,, Amphenol

32 C 09 B Male and female cable connector, full plastic, bayonet locking Male cable connector, max. cable outlet 6 mm, contact plating: silver. ca. (.8) 0 (.969) DIN Contact plating Contact plating silver gold ) T 99 T 99 T 99 T 99 T 99 Part Number Crimp termination ) T 9 ) T 9 T 9 T 9 T 9 ) (DIA.88) Female cable connector, max. cable outlet 6 mm, contact plating: silver. ca. 6 (.68) (.) DIN T 99 T 99 T 99 T 99 T 99 T 9 ) T 9 ) T 9 T 9 ) T 9 ) (DIA.88) Female cable connector, max. cable outlet 6 mm, contact plating: silver. ca. 69 (.) 6, (.8) DIN T 8 99 ) T 8 99 T 8 99 T 8 99 T 8 99 T 8 9 ) T 8 9 ) T 8 9 ) T 8 9 ) T 8 9 ) (DIA.88) ) Please order crimp contacts separately, see page 6 ) see remark page ) Available upon request. Amphenol

33 C 09 B,8 +0, (.0) 8, (.6) +0, bayonet locking Ring nut Bayonet outside Bayonet inside Panel cutout +0,, (.) bayonet locking, outside, shell: full plastic, front mounting, panel mounting with ring nut ), bayonet locking, outside, shell: full plastic, front mounting, snap-in-mounting, bayonet locking, inside, shell: full plastic, front mounting snap-in-mounting, bayonet locking, outside, shell: metal, rear mounting, panel mounting with ring nut ), contact plating: silver. M8x0, max. panel thickness, +0, max. panel thickness, +0, 6,6 (.60) (DIA.88) (.8) (.00), (.9), (.9) (.906), (.96) panel cutout see page,6 (.) (.) (.00) (DIA.8) S DIN DIN S DIN DIN S DIN DIN S DIN DIN Contact plating Contact plating silver gold ) T 000 T 08 ) T 000 T 08 ) T 000 T 08 ) T 000 T 08 ) T 000 T 08 ) T 00 T 8 ) T 00 T 8 ) T 00 T 8 ) T 9 00 T 9 8 ) T 00 T 8 ) T 00 T 8 ) T 00 T 8 ) T 00 T 8 ) T 6 00 T 6 8 ) T 6 00 T 6 8 ) T 00 T 8 ) T 00 T 8 ) T 00 T 8 ) T 9 00 ) T 9 8 ) T 00 T 8 ) T 00 T 8 ) T 00 T 8 ) T 00 T 8 ) T 6 00 T 6 8 ) T 6 00 T 6 8 ) T 00 T 00 T 00 T 9 00 T 00 T 00 ) T 00 T 00 T 6 00 ) T 6 00 ) Please order crimp contacts separately, see page 6 ) see remark page ) Panel mounting with hex nut upon request ) Available upon request. g 9 (.) (DIA.8) (DIA.8) M8x0, Part Number Crimp termination ) T 00 T 00 T 00 T 00 T 00 T 0 T 0 T 0 T 9 0 ) T 0 T 0 T 0 ) T 0 T 0 T 0 T 9 0 ) T 0 T 0 T 0 ) T 0 ) T 0 T 0 ) T 0 ) T 9 0 T 0 ) T 0 ) T 0 T 0 Amphenol

34 C 09 B bayonet locking outside right-angled full plastic metal bayonet locking, outside, right- angled, shell: full plastic, contact plating: silver. PCB-layout, (.0), (.09) Pol. (.9) (.9), (.098) (.9), (.9) (.8), (.) p, (.0), (.09), (.8) (.90) (.9) (.9),. 0 (.9), (.098), (.098) 9, A (.),8 (.0) Pol. Pol. (.9) (DIA.669), (.9) M A i pol. A b i = l (.) ( ) pol. =,9 (.66) 6pol. =8 (.09) C09B-9a, (.9) S DIN DIN, (.09) contact plating silver housing grey housing black T 0 T 0 T 9 0 T 0 0, (.9) (.0) (.9) (.9), (.098), (.098) T 600 T 600 T T 600 Pol. Ste Stereo (.9), (.9), (.098), (.09) Part Number Crimp termination ) 0, (.9) (.0) 6 (.9) (.9) 6 Pol. 6 Pol., (.098) (.9), (.098), (.9) C09B-8a bayonet locking, outside, right- angled, shell: metal, contact plating: silver. PCB-layout, (.0), (.09) Pol. Pol. Pol. Ste Stereo eo (.9) (.9), (.098) (.9), (.9) (.8), (.) 0, (.9) (.0), (.09), (.8) (.90) (.9) (.9),.6, (.098), (.098) 9, A (.),8 (.0) (.9), (.9) (DIA.669), (.9) M A pol. A b i = l (.) ( ) pol. +pol. =,9 (.66) 8pol. =8 (.09) C09B-a S DIN DIN contact plating silver housing grey housing black T 900 T T 900 T 900 0, (.9) (.0) 6, (.09) Amphenol (.9) (.9), (.098), (.098) Pol. Pol. (.9), (.9), (.098) (.0) 8 Part Number Crimp termination ) 0, (.9), (.09) 6 (.9) (.9) 8 Pol. 8 Pol., (.098) (.9), (.098), (.9) C09B-8a

35 C 09 B,8 +0, (.0) Male receptacle, bayonet locking, outside Contact plating Contact plating silver gold ) Male receptacle, T 6 00 T 6 8 ), bayonet locking, outside, (.9) T 6 00 T 6 8 ) front mounting, shell: full plastic, T 6 00 T 6 8 ) snap-in-mounting, S DIN DIN T ) T 6 00 T 6 00 T 6 00 ) T 96 8 ) T 6 8 ) T 6 8 ) T 6 8 ) (.906) max. panel thickness, +0, C09B-8a T 6 00 ) T ) T T 6 8 ) T 66 8 ) T 66 8 ) Please order crimp contacts separately, see page 6 ) see remark page ) Panel mounting with hex nut upon request ) Available upon request. (DIA.8) 8, (.6) +0, Panel cutout +0,, (.) Part Number Crimp termination ) T 6 0 T 6 0 T 6 0 T 96 0 ) T 6 0 T 6 0 T 6 0 ) T 6 0 (.) Fig. C 09B-, (DIA.6) (.) Fig. C 09B-08a, (DIA.80) Amphenol

36 6 Amphenol

37 C 09 D Main Features Precision metal construction. Ingress Protection class IP 6. Threaded coupling acc. to IEC Number of contacts are to 8, and. Internal metal strain relief. Complete EMI shielding in the fully mated and locked position (EMI security). Male and female cable connectors: solder in to 8,, positions; crimp in to 8 positions; cable outlet in PG for diameter of 6 mm; cable outlet in PG 9 for diameter of 8 mm ; straight cable entry; metal coupling nickel plated. Right-angled version also available. Please see special catalogue C 09 D Right Angle. Male and female receptacles for panel mount: front or rear mounting, solder in to 8,, positions; crimp in to 8 positions; PCB mounting, vertical, using dip solder termination with multiple tail lengths. The connectors are registered under File # E 6 09 UL. UNDERWRITERS LABORATORIES INC. Amphenol

38 8 Amphenol

39 C 09 D Characteristics General Characteristics Standard Characteristics Number of contacts Stereo 6 8 View on termination side of contact insert M K J G H E F L O N A B C D M K J G H E F L O N A B C D Contact arrangement acc. to DIN Contact arrangement acc. to IEC Electrical Characteristics Rated voltage Rated impulse withstand voltage Pollution degree Installation category Insulation group Test voltage Current rating Insulation resistance Contact resistance Climatical Characteristics Climatic category Temperature range Mechanical Characteristics IP-degree Insertion and withdrawal forces Mechanical operation N 90.oz 0 N 0.oz C C / - 0 F F * Remark for gold plated contacts In order to avoid brittle inter-metallic connections, gold-plated terminals have to be tin-plated in the solder area. Amphenol 9 0 / 8 / IEC V ~ 00V ~ 00 V ~ 00 V ~ 0 V ~ IEC V 0 V 00 V 0 V IEC IEC IEC I IEC V ~ 60 V ~ 980 V ~ 60 V ~ IEC 60- Test b A / + 0 C / + 0 F A / + 0 C / + 0 F IEC 60- Test a > 0 ½ IEC 60- < m ½ Test a IEC IEC IEC 609 IEC 60- Test b IEC 60- Test 9 a IP 6, cable diameter PG :. -.6, PG 9:.6 -. N.oz 0 N 80.oz N 0.oz Silver ³ 00 mating cycles Gold ³ 000 mating cycles Materials Housing material die cast, nickel plated Dielectric material thermoplastic Sealing material neoprene Contact plating silver plated / gold plated * Further Characteristics Termination technique solder, crimp Wire gauge solder ² 0, mm (-6 AWG), crimp 0, 0, mm (6-8 AWG) Flammability UL 9 V0 Locking system IEC metal screw coupling Characteristics Do not connect or disconnect under load. Metal housing parts shall be securely incorporated to protected ground. 60 N.oz 0 N 80.oz solder ² 0, mm / AWG

40 C 09 D Male cable connector Male cable connector. Max. cable outlet 6 mm, Male cable connector. Max. cable outlet 8 mm, PG SW 6 SW 6 ) Please order crimp contacts separately, see page 6 ) see remark page 9 PG 9 (.),6 (.) 8 (DIA.09) 8 (DIA.09) DIN S DIN DIN DIN S DIN DIN Contact plating silver C09 H00 00 C09 H00 00 C09 H00 00 C09 H0 00 C09 H C09 H00 00 C09 H0 00 C09 H C09 H0 00 C09 H0 00 C09 H00 0 C09 H00 0 C09 H00 0 C09 H0 0 C09 H006 0 C09 H00 0 C09 H0 0 C09 H008 0 Contact plating gold ) C09 H00 0 C09 H0 0 C09 H006 0 C09 H0 0 C09 H008 0 C09 H0 0 C09 H0 0 C09 H00 C09 H008 C09 H0 C09 H0 Part Number Crimp termination ) C09 H C09 H C09 H C09 H0 000 C09 H C09 H C09 H0 000 C09 H C09 H00 00 C09 H00 00 C09 H00 00 C09 H0 00 C09 H C09 H00 00 C09 H0 00 C09 H Assembling instruction Drehmoment Torque Kabel 6 0, 0, - Nm/ Nm, oz,6 oz Kabel 8 Drehmoment Torque 0, 0, - - Nm/,8.8 -,6 -.6.oz 8,, 0 Amphenol

41 C 09 D Female cable connector Female cable connector. Max. cable outlet 6 mm, Female cable connector. Max. cable outlet 8 mm, SW 6 PG ) Please order crimp contacts separately, see page 6 ) see remark page 9 PG 9 SW 6 8 (.8) 8, (.8) 8 (DIA.09) 8 (DIA.09) DIN S DIN DIN DIN S DIN DIN Contact plating silver C09 D00 00 C09 D00 00 C09 D00 00 C09 D0 00 C09 D C09 D00 00 C09 D0 00 C09 D C09 D0 00 C09 D0 00 C09 D00 0 C09 D00 0 C09 D00 0 C09 D0 0 C09 D006 0 C09 D00 0 C09 D0 0 C09 D008 0 Contact plating gold ) C09 D00 0 C09 D006 0 C09 D008 0 C09 D0 0 C09 D0 0 C09 D00 C09 D008 C09 D0 C09 D0 Part Number Crimp termination ) C09 D C09 D C09 D C09 D0 000 C09 D C09 D C09 D0 000 C09 D C09 D00 00 C09 D00 00 C09 D00 00 C09 D0 00 C09 D C09 D00 00 C09 D0 00 C09 D Assembling instruction Drehmoment Torque 0, 0, - Nm/ Nm, oz,6 oz Kabel 6 g Kabel 8 Drehmoment Torque 0, 0, - - Nm/,8.8 -,6 -.6.oz 8,, Amphenol

42 C 09 D max.mm max. mm +0, 8, (.) 8 +0, (.09) Female receptacle for front mounting Panel cutout R, -0, (R.08) contact plating: silver or gold, panel mounting with ring nut, sealing with O-Ring. termination: straight dip solder, contact plating: silver or gold, pin length mm ( + contacts: 8 mm) from flange, panel mounting with ring nut, sealing with O-Ring, solder area: tin plated. M8x0, M8x0,,8 (.0) 6, (.6),8 (.0) (.9), (.060) (DIA.88), (.060) (DIA.88) DIN S DIN DIN DIN S DIN DIN Contact plating silver C09 N00 00 C09 N00 00 C09 N00 00 C09 N0 00 C09 N C09 N00 00 C09 N0 00 C09 N C09 6N00 0 C09 6N00 0 C09 6N00 0 C09 6N0 0 C09 6N006 0 C09 6N00 0 C09 6N0 0 C09 6N008 0 Contact plating gold ) C09 N00 0 C09 N0 0 C09 N0 0 C09 6N0 0 C09 6N0 0 Part Number Crimp termination ) C09 N C09 N C09 N C09 N0 000 C09 N C09 N C09 N0 000 C09 N termination: straight dip solder, contact plating: silver, panel mounting with ring nut, sealing with O-Ring, solder area: tin plated. termination: straight dip solder, contact plating: silver, panel mounting with ring nut, sealing with O-Ring, solder area: tin plated. M8x0,, (.) M8x0,, (.),8 (.0) 9 (.8) (.9), (.060) (DIA.88),8 (.0), (.060) (DIA.88) DIN S DIN DIN DIN S DIN DIN C09 6N00 C09 6N00 C09 6N00 C09 6N0 C09 6N006 C09 6N00 C09 6N0 C09 6N008 C09 6N00 0 C09 6N00 0 C09 6N00 0 C09 6N0 0 C09 6N006 0 C09 6N00 0 C09 6N0 0 C09 6N008 0 ) Please order crimp contacts separately, see page 6 ) see remark page 9 ) Available upon request. Amphenol

43 C 09 D max.,mm max., mm +0, 8, (.) 8 +0, (.09) Female receptacle for rear mounting Panel cutout R, -0, (R.08) contact plating: silver or gold, panel mounting with ring nut, sealing with O-Ring. termination: straight dip solder, contact plating: silver or gold, pin length 0. mm ( + contacts:. mm) from flange, panel mounting with ring nut, sealing with O-Ring, solder area: tin plated. (DIA.88) (DIA.88), (.8),6 (.), (.8) 0, (.) M8x0,, (.) M8x0,, (.) DIN S DIN DIN DIN S DIN DIN Contact plating silver C09 G00 00 C09 G00 00 C09 G00 00 C09 G0 00 C09 G C09 G00 00 C09 G0 00 C09 G C09 G0 00 C09 G0 00 C09 6G00 0 C09 6G00 0 C09 6G00 0 C09 6G0 0 C09 6G006 0 C09 6G00 0 C09 6G0 0 C09 6G008 0 C09 6G0 0 C09 6G0 0 Contact plating gold ) C09 G00 0 C09 G00 0 C09 G00 0 C09 G008 0 C09 G0 0 C09 G0 0 C09 G006 0 C09 6G0 0 C09 6G0 0 Part Number Crimp termination ) C09 G ) C09 G C09 G ) C09 G0 000 C09 G C09 G ) C09 G0 000 C09 G termination: straight dip solder, contact plating: silver, panel mounting with ring nut, sealing with O-Ring, solder area: tin plated. termination: straight dip solder, contact plating: silver, panel mounting with ring nut, sealing with O-Ring, solder area: tin plated. (DIA.88),, (.), (.) (.0) (DIA.88), (.) 9, (.6), (.8), (.8) DIN S DIN DIN DIN S DIN DIN C09 6G00 C09 6G00 C09 6G00 C09 6G0 C09 6G006 C09 6G00 C09 6G0 C09 6G008 C09 6G00 0 C09 6G00 0 C09 6G00 0 C09 6G0 0 C09 6G006 0 C09 6G00 0 C09 6G0 0 C09 6G008 0 ) Please order crimp contacts separately, see page 6 ) see remark page 9 ) Available upon request. M8x0, M8x0,, (.) Amphenol

44 C 09 D, (.6) +0, Female receptacle for flange mounting Panel Cutout ±0, (.8) (.6), +0, sealing with O-Ring, termination: solder, contact plating: silver or gold, with sealing gasket. DIN S DIN DIN Contact plating silver C09 T00 00 C09 T00 00 C09 T00 00 C09 T0 00 C09 T C09 T00 00 C09 T0 00 C09 T Contact plating gold ) C09 T00 0 C09 T00 0 C09 T006 0 C09 T00 0 C09 T0 0 C09 T0 0 Part Number Crimp termination ) C09 T C09 T0 000 C 09 D max.,mm max., mm +0, 8, (.) g 8 +0, (.09) Male receptacle for front mounting Panel Cutout R, -0, (R.08) Male receptacle, contact plating: silver or gold, panel mounting with ring nut, sealing with O-Ring. M8x0, 6, (.6) 8, (.) 6 (.60) (DIA.88) DIN S DIN DIN Contact plating silver C09 W00 00 C09 W00 00 C09 W00 00 C09 W0 00 C09 W C09 W00 00 C09 W0 00 C09 W ) Please order crimp contacts separately, see page 6 ) see remark page 9 ) Available upon request. Contact plating gold ) C09 W0 0 C09 W0 0 Part Number Crimp termination ) C09 W C09 W C09 W C09 W0 000 C09 W C09 W C09 W0 000 C09 W Amphenol

45 C 09 D max.,mm max., mm +0, 8, (.) g 8 +0, (.09) Male receptacle for rear mounting Panel Cutout R, -0, (R.08) Male receptacle, contact plating: silver or gold, panel mounting with ring nut, sealing with O-Ring.,8 (.0) (DIA.88) (.) 6 (.60) M8x0, DIN S DIN DIN Contact plating silver C09 C00 00 C09 C00 00 C09 C00 00 C09 C0 00 C09 C C09 C00 00 C09 C0 00 C09 C Contact plating gold ) C09 C00 0 C09 C008 0 C09 C0 0 C09 C0 0 Part Number Crimp termination ) C09 C ) C09 C ) C09 C ) C09 C0 000 ) C09 C ) C09 C C09 C0 000 ) C09 C C 09 D, (.6) +0, Male receptacle for flange mounting Panel Cutout ±0, (.8) (.6), +0, Male receptacle, sealing with O-Ring, termination: solder, contact plating: silver or gold, with sealing gasket. DIN S DIN DIN C09 S00 00 C09 S00 00 C09 S00 00 C09 S0 00 C09 S C09 S00 00 C09 S0 00 C09 S ) Please order crimp contacts separately, see page 6 ) see remark page 9 ) Available upon request. Contact plating Contact plating silver gold ) C09 S006 0 C09 S008 0 C09 S0 0 C09 S0 0 Part Number Crimp termination ) C09 S C09 S C09 S0 000 Amphenol

46 C 09 Crimp contacts Pin contact Socket contact Typ of Contact Contact Ø Wire Gauge max. Insul. Ø Supplied as Pcs. silver Part Number gold Pin contact. mm mm AWG mm single contact 00 VN VN contacts on reel 0 ZN ZN HN HN mm AWG mm single contact 00 VN VN contacts on reel 0 ZN ZN HN HN Socket contact. mm mm AWG mm single contact 00 VN () VN () contacts on reel 0 ZN () ZN () 00 HN () HN () mm AWG mm single contact 00 VN () VN () contacts on reel 0 ZN () ZN () 00 HN ( HN () For more information upon crimping tools please contact factory or order our catalogue. Minimum retention forces according to IEC - Wires Wires Wire size Minimum retention force Crimp hight (average values) Wire size Minimum retention force Crimp hight (average values) h max mm N mm mm AWG N h max mm AWG AWG These min. values are based on the copper wire tensile strength with db Å 0 N/mm. 6 Amphenol

47 C 09 Accessories Description for Series Drawing Part Number Spanner wrench for receptacles with ring nut. C 09 A C 09 B C 09 D N Spanner wrench for male and female cable connectors. C 09 A C 09 B C 09 D FH Protective cover for male cable connectors and male receptacles. C 09 A C 09 D L 0, for male cable connectors C 09 00U L = 00 M6x0, 8 flat sealing Flach se einstellbar for male receptacles C 09 00U000 0 L = 80 Protective cover for female cable connectors and female receptacles. C 09 A C 09 D L 8, for female cable connectors C 09 00V L = 00 M6x0, 8 se einstellbar for female receptacles C 09 00V000 0 L = 80 Safety washer for male and female receptacles. Packaging unit: pieces C 09 A C 09 B VN () Colored back-shells C 09 A C 09 B Colour blue red yellow green Pieces Part Number T T C T 99 9 T 99 9C T 99 9 T 99 9C T 99 9 T 99 9C Amphenol

48 C 09 Summary of Part Numbers Part Number Page Part Number Page Part Number Page Part Number Page Part Number Page Part Number Page C 09 00U C 09 00U000 0 C 09 00V C 09 00V000 0 C09 C C09 C C09 C C09 C C09 C C09 C C09 C0 000 C09 C0 000 C09 D C09 D00 00 C09 D C09 D00 00 C09 D C09 D00 00 C09 D C09 D C09 D C09 D00 00 C09 D C09 D C09 D0 000 C09 D0 00 C09 D0 000 C09 D0 00 C09 G C09 G C09 G C09 G C09 G C09 G C09 G0 000 C09 G0 000 C09 H C09 H C09 H C09 H C09 H C09 H C09 H C09 H C09 H C09 H C09 H C09 H C09 H C09 H C09 H C09 H C09 N C09 N C09 N C09 N C09 N C09 N C09 N0 000 C09 N0 000 C09 W C09 W C09 W C09 W C09 W C09 W C09 W0 000 C09 W0 000 C09 C00 00 C09 C00 00 C09 C00 00 C09 C C09 C00 00 C09 C C09 C0 0 C09 C0 0 C09 C0 00 C09 C0 00 C09 D00 00 C09 D00 0 C09 D00 00 C09 D00 0 C09 D00 00 C09 D00 0 C09 D C09 D006 0 C09 D00 00 C09 D00 0 C09 D C09 D008 0 C09 D0 00 C09 D0 0 C09 D0 C09 D0 00 C09 D0 0 C09 D0 C09 D0 00 C09 D0 0 C09 D0 00 C09 D0 0 C09 G00 00 C09 G00 00 C09 G00 00 C09 G C09 G00 00 C09 G C09 G0 00 C09 G0 0 C09 G0 00 C09 G0 0 C09 G0 00 C09 G0 00 C09 H C09 H C09 H C09 H C09 H C09 H C09 H C09 H C09 H C09 H C09 H C09 H C09 H C09 H0 0 0 C09 H0 0 C09 H C09 H0 0 0 C09 H0 0 C09 H C09 H0 0 0 C09 H C09 H0 0 0 C09 N00 00 C09 N00 00 C09 N00 00 C09 N C09 N00 00 C09 N C09 N0 0 C09 N0 0 C09 N0 00 C09 N0 00 C09 S00 00 C09 S00 00 C09 S00 00 C09 S C09 S00 00 C09 S C09 S0 0 C09 S0 0 C09 S0 00 C09 S0 00 C09 T00 00 C09 T00 00 C09 T00 00 C09 T C09 T00 00 C09 T C09 T0 0 C09 T0 0 C09 T0 00 C09 T0 00 C09 W00 00 C09 W00 00 C09 W00 00 C09 W C09 W00 00 C09 W C09 W0 0 C09 W0 0 C09 W0 00 C09 W0 00 C09 6G00 0 C09 6G00 C09 6G00 0 C09 6G00 0 C09 6G00 C09 6G00 0 C09 6G00 0 C09 6G00 C09 6G00 0 C09 6G006 0 C09 6G006 C09 6G006 0 C09 6G00 0 C09 6G00 C09 6G00 0 C09 6G008 0 C09 6G008 C09 6G008 0 C09 6G0 0 C09 6G0 0 C09 6G0 0 C09 6G0 0 C09 6G0 0 C09 6G0 C09 6G0 0 C09 6G0 0 C09 6G0 C09 6G0 0 C09 6N00 0 C09 6N00 C09 6N00 0 C09 6N00 0 C09 6N00 C09 6N00 0 C09 6N00 0 C09 6N00 C09 6N00 0 C09 6N006 0 C09 6N006 C09 6N006 0 C09 6N00 0 C09 6N00 C09 6N00 0 C09 6N008 0 C09 6N008 C09 6N008 0 C09 6N0 0 C09 6N0 0 C09 6N0 0 C09 6N0 C09 6N0 0 C09 6N0 0 C09 6N0 C09 6N0 0 FH HN HN HN HN HN () 6 HN () 6 HN () 6 HN () 6 N T C T T 99 9C T 99 9 T 99 9C T 99 9 T 99 9C T 99 9 T T T T 0 00 T T T T T 00 T 00 T 00 T 0 T 08 T 08 T T T 08 8 T 00 9 T 000 T 009 T 08 T 00 T 09 T 00 T T T T T T T T T 60 0 T T 60 0 T 60 0 T 60 0 T 6 00 T 6 00 T 6 00 T 6 00 T 6 0 T 6 08 T 6 08 T 6 08 T 6 0 T 6 08 T 6 T 6 T 6 T T T T T T T T T T T 6 08 T 6 00 T 6 09 T 6 8 T 6 0 T 6 00 T 6 T 6 0 T 6 00 T 6 T 6 0 T 6 0 T T 00 T 8 T 0 T 00 T 0 T 08 T 0 T 0 T 0 T 8 T 8 T 8 T T T T 9 T 99 T 00 8 T 0 8 T 08 8 T 0 8 T 0 8 T 0 8 T 8 8 T 8 8 T 8 8 T 8 T 8 T 8 T 9 T 99 T 6 00 T 6 8 T 6 0 T 000 T 08 T 00 T 00 T 0 T 0 T 00 T 8 T 0 T 600 T 900 T T T T T T T 8 0 T 8 0 T 8 0 T 8 9 T 8 99 T T T T T T T 9 6 T 9 6 T 9 6 T T T T T T T T T 00 0 T T 00 0 T 00 0 T 00 0 T 0 00 T 0 00 T 0 00 T 0 00 T 0 0 T 0 08 T 0 08 T 0 08 T 0 0 T 0 08 T 0 T 0 T 0 T T T T T T T T T T T 0 08 T 0 00 T 0 09 T 0 8 T 0 0 T 0 00 T 0 T 0 0 T 0 00 T 0 T 0 0 T 0 0 T 00 T 8 T 0 T 00 T 0 T 08 T 0 T 0 T 0 T 8 T 8 T 8 T T T T 9 T 99 T 00 8 T 0 8 T 08 8 T 0 8 T 0 8 T 0 8 T 8 8 T 8 8 T 8 8 T 8 T 8 T 8 T 9 T 99 T 6 00 T 6 8 T 6 0 T 000 T 08 T 00 T 00 T 0 T 00 T 8 T 0 T T T T T T T 8 0 T 8 0 T 8 0 T 8 9 T 8 99 T T T T T T T 9 6 T 9 6 T 9 6 T T 6 00 T T T T 6 0 T 6 08 T 6 0 T 6 0 T 6 0 T 00 T 00 T 08 T 08 T 08 T 0 T 08 T T T T T T T T T T T T 9 08 T 9 00 T 9 09 T 9 8 T 9 0 T Amphenol

Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH

Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH C 091 A Main Features Metal threaded coupling acc. to IEC. Number of contacts are 2 to 8, 12 and 14. Internal metal strain relief

More information

C 091 D. Main Features

C 091 D. Main Features Main Features Precision metal construction. Ingress Protection class IP 6. Threaded coupling acc. to IEC 130-9. Number of contacts are 3 to 8, and. Internal metal strain relief. Complete EMI shielding

More information

400 Series Buccaneer BUCCANEER POWER. bulgin

400 Series Buccaneer BUCCANEER POWER. bulgin bulgin BUCCANEER FOR POWER Contact Retainer Sealing Gasket O Ring Contacts Locking Ring Retaining Nut Panel Body Contacts Contact Carrier O Ring Main Body Cable Gland Collet Gland Nut Sealed to IP68 when

More information

ODU MEDI-SNAP. Miniature Circular Connectors with Push-Pull Locking Made of Plastic or Metal. www.odu.de

ODU MEDI-SNAP. Miniature Circular Connectors with Push-Pull Locking Made of Plastic or Metal. www.odu.de Miniature Circular Connectors with Push-Pull Locking Made of Plastic or Metal Miniature Circular Connectors with Push-Pull Locking for Medical Applications Applications Medical Test and measure equipment

More information

Mini USB and USB 2.0-IP67 Connector System

Mini USB and USB 2.0-IP67 Connector System Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet

More information

Universal MATE-N-LOK Connectors

Universal MATE-N-LOK Connectors Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification completely enclosed in housings Positive locking housings Insulation capability to.00

More information

Directory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U 02. 01. Technical characteristics types D and E... 02.

Directory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U 02. 01. Technical characteristics types D and E... 02. Directory chapter 02 - () Types D, E, F, FM, 2F, F9, interface connectors I/U Page Technical characteristics types D and E.............................. 02.10 Type D connectors.................... 02.11

More information

08. SEK IDC CONNECTORS

08. SEK IDC CONNECTORS . IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these

More information

7000 Series Buccaneer

7000 Series Buccaneer The all plastic and metal construction of the - circular that combine the ease of use of a quick coupling mechanism with proven environmental sealing for signal and mains power. Designed and independently

More information

Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System

Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Revised Sept--22-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Description The sealed circular RJ45 connector system is designed for use in harsh environments. The connector

More information

6000 Series Buccaneer. 30 twist locking Tamperproof lock prevents accidental un-mating. Cat 5e shielded coupler Maintains shielding

6000 Series Buccaneer. 30 twist locking Tamperproof lock prevents accidental un-mating. Cat 5e shielded coupler Maintains shielding circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available with metal or plastic bodies, the range supports both data (USB and Ethernet),

More information

400 Series - Mini USB Buccaneer

400 Series - Mini USB Buccaneer IP68 Sealed IP68 rated USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof to EN60529 Data rates up to 480Mbs Hot pluggable,

More information

SOURIAU s discrete wire sealing

SOURIAU s discrete wire sealing SOURIAU s discrete wire sealing Description Using proven grommet technology from SOURIAU s extensive knowledge of harsh environments, the UTO & UTS connectors with grommet garantie a discrete wire sealing

More information

Amphenol. Amphenol-Tuchel Electronics GmbH. Circular Connectors Series C 16-1/ C 16-3

Amphenol. Amphenol-Tuchel Electronics GmbH. Circular Connectors Series C 16-1/ C 16-3 Amphenol Amphenol-Tuchel Electronics GmbH Circular Connectors Series C 6-/ C 6-3 The Company Amphenol-Tuchel Electronics GmbH is a member of the USA based Amphenol Corporation. With our own global presence

More information

Amphenol Amphenol-Tuchel Electronics GmbH

Amphenol Amphenol-Tuchel Electronics GmbH Amphenol Amphenol-Tuchel Electronics GmbH Circular Connectors easier and quicker to assemble mate by Amphenol The Company Amphenol-Tuchel Electronics GmbH is a member of the USA based Amphenol Corporation.

More information

Outdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series

Outdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Outdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series Optical FO-BH Series (Compact Type) CONNECTOR

More information

Jack to Jack adapters Plug to Plug U-Link connectors PCB Right angle plastic PCB Right angle - metal. Ordering Codes

Jack to Jack adapters Plug to Plug U-Link connectors PCB Right angle plastic PCB Right angle - metal. Ordering Codes BNC 75Ω RF CONNECTORS BNC 75Ω RF CONNECTORS To meet the need for higher performance, impedance matched cable interconnections, Amphenol offers a full line of 75 ohm BNC connectors. These connectors can

More information

IEC Connectors. Introduction

IEC Connectors. Introduction Introduction IEC Connectors A full range of quality mains rated inlets, outlets and connectors conforming to IEC and EN 60320 specifications carrying UL, CSA, VDE and other approvals. With electrical ratings

More information

AMPSEAL* Automotive Plug Connector and Header Assembly

AMPSEAL* Automotive Plug Connector and Header Assembly AMPSEAL* Automotive Plug Connector and Header Assembly Application Specification 24 SEP 97 Rev E All dimensions are given in millimeters unless otherwise specified. All dimensional tolerances are +0.2

More information

Waterproof Connectors for Outdoor Use

Waterproof Connectors for Outdoor Use Waterproof Connectors for Outdoor Use HR41A Series Mated condition diagram Nut-tightening rear mount type (panel thickness=mm) 70.5 Features 1. Waterproof connector designed for outdoor use Light-weight

More information

Directory chapter 04

Directory chapter 04 M Directory chapter 04 D-Sub Mixed subminiature D connectors New Page D-Sub mixed connector system general information................... 04.02 Contact arrangements............................................

More information

SMS - Qikmate. Performance characteristics

SMS - Qikmate. Performance characteristics - Qikmate Qikmate panel and cable connectors Description The versatile Qikmate panel and cable connectors are a highly cost-effective system approach to solving the constant demand for more cost effective

More information

SB 175 Connectors - up to 280 Amps

SB 175 Connectors - up to 280 Amps Connectors - up to 280 Amps 2 Pole Wires sizes from #12 (3.3 mm²) to 1/0 (50 mm²) fit in the second to largest connector in the SB series. The 3 pole adds an additional position for power or grounding.

More information

ODU MINI-SNAP. Miniature Cylindrical Connectors with Push-Pull-Locking Series F

ODU MINI-SNAP. Miniature Cylindrical Connectors with Push-Pull-Locking Series F Catalogue Nr.: 5--a-e ODU MINI-SNAP Miniature Cylindrical Connectors with Push-Pull-Locking Series F ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstraße, D-85 Mühldorf/Inn Telefon: +9/86 /6 56-, Telefax:

More information

411-18305-1 26 JUL 2011 Rev. G

411-18305-1 26 JUL 2011 Rev. G 1. Introduction This instruction sheet covers the installation and termination of the SOLARLOK* connectors and accessory. 2. Supporting Documents 2.1. Customer Drawings Dimensions and material specifications

More information

Industrial circular connectors

Industrial circular connectors Industrial circular connectors M 16 M 58 010 CONINVERS - M16 to M58 circular connectors for industrial applications CONINVERS GmbH, an independent company, is the specialist for M16 to M58 circular connectors

More information

Now Available in Black Zinc Nickel

Now Available in Black Zinc Nickel 847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances

More information

UTS discrete wire sealing

UTS discrete wire sealing Description Using proven grommet technology from SOURIAU s extensive knowledge of harsh environments, the UTS connector with grommet garanties a discrete wire sealing rated to IP67 (up to IP68 / IP69k

More information

D-Subminiature Series

D-Subminiature Series Rectangular Connectors Presentation Souriau D-Sub connectors are used for military/aerospace applications and in industrial field: information systems, communication systems, industrial electronic...

More information

Standard Buccaneer - Ethernet

Standard Buccaneer - Ethernet IP6 rated compliant PUR jacket on cable Shielded system shielded coupler Shroud on RJ45 Screw coupling Rewireable flex connector PCB mounted panel connector IDC termination panel connector Earth lead version

More information

SMA Connectors. RF Coax Connectors. Product Facts

SMA Connectors. RF Coax Connectors. Product Facts SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes

More information

14 PHOENIX CONTACT Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108. info@powermation.com - 800-843-9859 - www.powermation.

14 PHOENIX CONTACT Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108. info@powermation.com - 800-843-9859 - www.powermation. 14 PHOENIX CONTACT PLUSCON circular is a circular connector for use in industrial automation. The range of design sizes available is varied, starting with the design sizes M5 to M8 and M1, for sensor/actuator

More information

picomax The Pluggable Connection System

picomax The Pluggable Connection System picomax The Pluggable Connection System TECHNOLOGY THIS SPECIALIZED CAN T MEET ALL REQUIREMENTS. YES IT CAN. CONTENTS picomax Pin spacing: 3. mm/0.138 in;.0 mm/0.197 in; 7. mm/0.29 in Versatile Pluggable

More information

Operating instructions PV plug-in connector WM4 and WM4 box. Technical data WARNING! NOTE! Creation date 22th May 2014

Operating instructions PV plug-in connector WM4 and WM4 box. Technical data WARNING! NOTE! Creation date 22th May 2014 WARNING! The electrical connections must not be dis-connected and plugged under load. Depending on the light intensity, voltage, generated by the module, may be present. The connectors must not be put

More information

Universal MATE-N-LOK Connector System

Universal MATE-N-LOK Connector System Universal MATE-N-LOK Connector System 2011 Tyco Electronics Corporation. All Rights Reserved. MATE-N-LOK, TE Connectivity, TE Connectivity (logo) and TE (logo) are trademarks. Other logos, products and/or

More information

ISO VIEW OF AX SERIES XLR CABLE CONNECTOR

ISO VIEW OF AX SERIES XLR CABLE CONNECTOR ISO VIEW OF AX SERIES XLR CABLE CONNECTOR One piece ground / latch spring design incorporating twin wipe contacts for a direct connection path from mating shell to ground providing enhanced connection

More information

GISMA UNDERWATER CONNECTORS SERIES 40

GISMA UNDERWATER CONNECTORS SERIES 40 CONTENTS SEITE / PAGE GENERAL 4 GENERAL ARRANGEMENT 5 DESIGN MECHANICAL FEATURES 7 FIBRE OPTIC FEATURS 7 ELECTRICAL FEATURES 7 REFERENCE SYSTEM 8 REFERENCE SYSTEM CONTACTS 9 CONTACT LAYOUTS 9 SUGGESTIONS

More information

Glenair Military and Industrial Power and Signal Connectors

Glenair Military and Industrial Power and Signal Connectors Glenair Military and Industrial Power and Signal Connectors Series ITS (And FRITS) 5015 Type Reverse Bayonet Connectors Derived from MIL-DTL-5015 and VG95234 Mating mechanism (3 reverse bayonets at 120

More information

Connection Technology For Harsh Environments Industrial Ethernet IP 65 / IP 67 Rated

Connection Technology For Harsh Environments Industrial Ethernet IP 65 / IP 67 Rated Connection Technology For Harsh Environments Industrial Ethernet IP 65 / IP 67 Rated CONEC Industrial Ethernet Connectors IP 65 / IP 67 Rated Industrial Ethernet Networks Target: any RJ45 application that

More information

Standard Buccaneer - USB

Standard Buccaneer - USB IP68 rated USB version 2.0 performance Plug and play capability Visual mating indication Shielded system Single and double ended cables Screw coupling PCB versions Dust and waterproof sealing when mated

More information

Quadrax for Full Duplex Ethernet Link

Quadrax for Full Duplex Ethernet Link 8D Series Quadrax Contacts Quadrax for Full Duplex Ethernet Link Quadrax contacts with robust MIL-DTL-38999 compliant screw coupling system for networks and high vibration environments. High speed One

More information

EPIC CIRCON M23 Series Circular Signal Connectors

EPIC CIRCON M23 Series Circular Signal Connectors Circular Signal Connectors CIRCON M2 circular signal connectors are designed to DIN specification N698 and have a standard M2 threaded connection housing. They are offered in coupler, connector, and panel

More information

PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES

PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium

More information

HARTING Ethernet Cabling 8-poles Overview

HARTING Ethernet Cabling 8-poles Overview Ethernet Cabling 8-poles Overview RJ45 Connectors [on page 8] System cables [on page 12] Distribution modules and Outlets [on page 17] Connectors [on page 20] System cables [on page 26] Panel feed-throughs

More information

Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...

Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2... Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast

More information

UTS discrete wire sealing

UTS discrete wire sealing Technical characteristics Mechanical Durability: 250 matings & unmatings Vibration resistance: Sinusoidal vibrations per CEI 605-4 - from 10 to 2000 Hz Thermal shock: 5 cycles 30 min. from -40 C to 105

More information

AC SERIES-C TYPE DUAL CONNECTORS JACK/XLR

AC SERIES-C TYPE DUAL CONNECTORS JACK/XLR AC SERIES-C TYPE DUAL CONNECTORS JACK/XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 )

More information

ANOISON HPQN SERIES HPQN CONNECTORS INTERFACE DIMENSIONS. Description. Interface Dimensions 21 Characteristics

ANOISON HPQN SERIES HPQN CONNECTORS INTERFACE DIMENSIONS. Description. Interface Dimensions 21 Characteristics SERIES HPQN CONNECTORS DESCRIPTION CONTENT Designed by James Qu at Anoison in 2006, the HPQN is a quick locking version of the widely used type N connector. By replacing the threaded interface of the original

More information

.093 [2.36] Commercial Pin and Socket Connectors

.093 [2.36] Commercial Pin and Socket Connectors Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel mounting

More information

PAM Connectors. PAM Bayonet Connectors

PAM Connectors. PAM Bayonet Connectors PAM Bayonet Tel : 33 (0)1 60 84 21 40 Fax : 33 (0)1 60 84 43 81 info@bernier.tm.fr www.bernier.tm.fr Overview Miniature audio connectors with bayonet locking system, equipped with 07 or 10 contacts, and

More information

RJF TV ROHS COMPLIANT N & BZ. Amphenol. Ethernet connection system for harsh environment. Part number code

RJF TV ROHS COMPLIANT N & BZ. Amphenol. Ethernet connection system for harsh environment. Part number code Ethernet connection system for harsh environment ROHS COMPLIANT N & BZ RJFTV allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT, 100 BaseTx or 1000 BaseT networks in harsh environments.

More information

6000 Series Buccaneer

6000 Series Buccaneer Robust, instant connections for harsh environments 6000 Series Buccaneer - circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available

More information

Industrial Ethernet Circular Sealed RJ-45 Connectors

Industrial Ethernet Circular Sealed RJ-45 Connectors Industrial Ethernet Circular Sealed RJ-45 Connectors Product Facts Threaded outer connection contributes to: Environmental sealing (IP67 rated) Vibration resistance Secure, robust connections Provide for

More information

PCB mounted UTS Hi seal: rugged & plastic

PCB mounted UTS Hi seal: rugged & plastic PC mounted UTS Hi seal: rugged & plastic Jam nut & Square flange receptacles with PC tail contacts were designed for applications in harsh environments where s are used in wet, corrosive and tight-space

More information

SMA Interface Mating Dimensions (Per MIL-STD-348)

SMA Interface Mating Dimensions (Per MIL-STD-348) SMA Series SMA 6 SMA Interface Mating Dimensions (Per MIL-STD-348) SMA Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.250 6.35.263 6.68.. B.1790 4.55.1808

More information

Trapezoidal-Connectors Series TMC

Trapezoidal-Connectors Series TMC Trapezoidal-Connectors Series TMC Subminiature-D Connectors to DIN 41 652/IEC 807-3 General Series TMC connectors are available in 5 different housing sizes with 9, 15, 25, 37 and 50 pins. In applications

More information

SMS IP: high voltage sealed plastic connector

SMS IP: high voltage sealed plastic connector : high voltage sealed plastic connector connector designed for indoor railway equipments, using the standard Ø 1.6 contact. Safe Compliant to fire and smoke standards Sealed Finger proof High operating

More information

* Please visit the product pages on our website for the most up-to-date product information. Con-X Molded Cable Assembly Checklist...

* Please visit the product pages on our website for the most up-to-date product information. Con-X Molded Cable Assembly Checklist... TABLE OF CONTENTS Custom Molded Cable Assemblies and Connectors..........................2 Capabilities.....................................................................3 Standard Connector Products.......................................................4

More information

PowerLine. Single Pole Connectors

PowerLine. Single Pole Connectors PowerLine Single Pole Connectors Ten 47 Limited Unit 2B Frances Industrial Park Kirkcaldy, Scotland, UK KY1 2XZ Tel: +44 (0)1592 655725 Fax: +44 (0)1592 651049 Email: sales@ten47.com INTRODUCTION BACKGROUND

More information

TINY xlr... 4. Plugs... 6. Jacks... 8. Phono "RCA" & DIN Connectors... 10. Patch Box & Stage Box... 12. Dual Banana Plug... 14. Technical Data...

TINY xlr... 4. Plugs... 6. Jacks... 8. Phono RCA & DIN Connectors... 10. Patch Box & Stage Box... 12. Dual Banana Plug... 14. Technical Data... Product Guide 2010 C o n t e n t P a g e TINY xlr... 4 Plugs... 6 Jacks... 8 Phono "RCA" & DIN Connectors... 10 Patch Box & Stage Box... 12 Dual Banana Plug... 14 Technical Data... 15 2 R E A N With the

More information

Socapex. Dedicated Solutions for Entertainment. Amphenol.

Socapex. Dedicated Solutions for Entertainment. Amphenol. Socapex Amphenol Dedicated Solutions for Entertainment www.socapex.com How to order a "Socapex" SOCAPEX 19 pins Black coating - 7 pre-mate earth contacts SL GD EF 419 AR SLX GD EF 419 AR SL D FMD 419 AR

More information

HARTING Ethernet Cabling 8-poles Overview

HARTING Ethernet Cabling 8-poles Overview Overview Connectors [on page B 2 8] System cables [on page B 2 10] Distribution modules and Outlets [on page B 2 13] Connectors [on page B 2 16] System cables [on page B 2 20] Panel feed-throughs [on page

More information

AC SERIES DUAL 1/4 (6.35mm) / XLR

AC SERIES DUAL 1/4 (6.35mm) / XLR AC SERIES DUAL 1/4 (6.35mm) / XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 ) phone jack

More information

Figure 1 (end) Updated document to corporate requirements Added text to Paragraph 2.4

Figure 1 (end) Updated document to corporate requirements Added text to Paragraph 2.4 This specification covers the requirements for application of ELCON Drawer Series Connectors: True Hot Plug, Blind Mating Mixed Signal and Power Connectors. These connectors are designed for use in pluggable

More information

SMA Series Subminiature RF Connectors

SMA Series Subminiature RF Connectors SMA Series Subminiature RF Connectors Screw-on mating Frequency range DC-18 GHz High performance Rugged construction ONLINE CATALOG 104 John W. Murphy Drive P.O. Box 510 New Haven, CT 06513 www.aepconnectors.com

More information

04. INDUSTRIAL CONNECTOR Han

04. INDUSTRIAL CONNECTOR Han . INDUSTRIAL CONNECTOR industrial connectors with degree of protection IP 65 / IP 67 represent the worldwide standard for safe installation, quick commissioning and easy servicing of machines and plants.

More information

AMP. 5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Soft Shell Pin and Socket Connectors. Product Facts. Standard Density

AMP. 5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Soft Shell Pin and Socket Connectors. Product Facts. Standard Density 5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Product Facts Compact design with 19.4 mm mated height Power circuit connector with 5.0 mm contact centerline Wire-to-board connectors consisting of

More information

RJF TV Ethernet connection system for harsh environment

RJF TV Ethernet connection system for harsh environment RJF TV Ethernet connection system for harsh environment ROHS compliant N & BZ RJFTV allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT, 100 BaseTx or 1000 BaseT networks in harsh environments.

More information

The Wild Children of D38999

The Wild Children of D38999 micro38999 Series High Vibration Miniature Connectors The Wild Children of D38999 A complete range of space saving compact connectors with all of the features and capabilities of D38999 for harsh applications.

More information

MICRODOT Coaxial Connectors Introduction

MICRODOT Coaxial Connectors Introduction MICRODOT Coaxial Connectors Introduction Product Facts Designed to accept 50, 70 and 93 ohm miniature coaxial cables Three types of connectors: Screw-on Series, Slide-on Series and Quick-Connect Series

More information

General information. Your Connection to Light

General information. Your Connection to Light General information Your Connection to Light Index of part numbers Reference Catalogue page Reference Catalogue page Reference Catalogue page 22.223 [10] 14, 15 22.225 [10] 16 22.228 [10] 20 22.230 [10]

More information

SMB Series Subminiature RF Connectors

SMB Series Subminiature RF Connectors SMB Series Subminiature RF Connectors ONLINE CATALOG Snap-on mating Frequency range DC-4 GHz Lightweight and economical SLB and SMC connectors also shown for comparison 104 John W. Murphy Drive P.O. Box

More information

SMZ type 43 INTRODUCTION. The Radiall Type 43 coaxial connector range. Type 43 series - Features and benefits

SMZ type 43 INTRODUCTION. The Radiall Type 43 coaxial connector range. Type 43 series - Features and benefits INTRODUCTION The Radiall Type 43 coaxial connector range The Radiall range of Type 43 series connectors is fully approved (where applicable) to BT (British Telecom) standards as well as to British Standard

More information

AmphenolR. Now you're connected!

AmphenolR. Now you're connected! Table of Contents CoolPower Overview... Page 3 CoolPower Slim Drawer - DW Series... Page 4 CoolPower D-Sub - LCC17 Series... Page 7 Amphenol Power Solutions... Page 9 Other Amphenol Commercial Products...

More information

Quick Reference Guide Mini-Universal MATE-N-LOK Connector System

Quick Reference Guide Mini-Universal MATE-N-LOK Connector System Quick Reference Guide The offers wire-to-wire and wire-to-board connections with contacts on a 4.14 mm [.163] centerline and current ratings up to 9.5 Amps max. per line. Plug and receptacle housings allow

More information

COAX/SIGNAL HYBRID MICRO-D CONNECTORS

COAX/SIGNAL HYBRID MICRO-D CONNECTORS COAX/SIGNAL HYBRID MICRO-D CONNECTORS Omnetics high reliability Micro-D connectors are available with mixed coax/signal contact layouts. The number of coax and signal contacts may be specified to provide

More information

01. HARTING RJ INDUSTRIAL RJ45 ETHERNET CONNECTORS

01. HARTING RJ INDUSTRIAL RJ45 ETHERNET CONNECTORS . HARTING RJ INDUSTRIAL ETHERNET CONNECTORS Ethernet is is coming up to standard industrial interface. Therefore, automation devices such as controllers, sensors and actuators feature possess on one or

More information

MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors

MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MP Economy Power (EP) Connectors Table of Contents 2 Introduction This catalog has been designed to assist you, our customer, identify products to satisfy your connector needs for printed circuit board

More information

16/32A Charge plug SAE J1772. Charge connector 16/32A March 2010 - FCI COPYRIGHT

16/32A Charge plug SAE J1772. Charge connector 16/32A March 2010 - FCI COPYRIGHT 16/32A Charge plug SAE J1772 1 Charge plug applications SAE J1772 16/32A IEC 62196-2-2 16/32/63A Renault 2 SAE J1772 charge plug configurations Charging stations 16A and 32A : Domestic charging 16A : (mode

More information

HARTING Ethernet Cabling 4-poles Overview

HARTING Ethernet Cabling 4-poles Overview Ethernet Cabling 4-poles Overview RJ45 Connectors [on page 8] System cables [on page 10] Distribution modules and Outlets [on page 20] Connectors [on page 22] System cables [on page 24] Panel feed-throughs

More information

COAXICON Contacts. RF Coax Connectors. Product Facts

COAXICON Contacts. RF Coax Connectors. Product Facts COXICON Contacts Product Facts Tyco Electronics provides a variety of contacts for coaxial connectors Contacts are available in a range of sizes that may be used with the various types of coaxial cable

More information

CIN::APSE MICROMINIATURE D-SUB

CIN::APSE MICROMINIATURE D-SUB INTRODUCTION CINCH has been producing filter connectors for years and has acquired an in depth knowledge of EMC protection. CINCH offers fast delivery on a wide range of standard filtered connectors and

More information

Givare NC-SRS 280 och 880

Givare NC-SRS 280 och 880 Givare NC-SRS 280 och 880 Aratron AB/Nordic Control, 02 03 SRS280SEALED ROTARY SENSOR PERFORMANCE ±2 Resistance ±20% Hysteresis (repeatability) Accuracy Applied voltage maximum Resolution Output smoothness

More information

gesis IP + Heavy Duty Class I, Zone 2

gesis IP + Heavy Duty Class I, Zone 2 gesis IP + Heavy Duty gesis IP+ 20i HD Z2 Heavy-Duty Connectors for Class 1, Zone 2 Hazardous Locations Catalog 2012 Catch the Next Wave in Modular Connections Plug & Go Heavy-Duty Connectors for areas

More information

Assembly Instruction CAI- Connector with universal Endbell

Assembly Instruction CAI- Connector with universal Endbell CANNON STANDARD Seite 1 von 17 CAI- Connector with universal Endbell Shell size 10 to 36 with APK contact / Trident T2P - contact Illustration and assembly exemplary of CAI Layout 20-0306 with APK / Trident

More information

SMA - 50 Ohm Connectors

SMA - 50 Ohm Connectors SMA Captivated Solderless Contact Connectors for Semi-Rigid Cable The Johnson captivated solderless contact connectors for semi-rigid cable provide a unique solution for high frequency cable assemblers.

More information

ODU MINI-SNAP PC. Miniature Cylindrical Connectors with Push-Pull-Locking in Plastic

ODU MINI-SNAP PC. Miniature Cylindrical Connectors with Push-Pull-Locking in Plastic Catalogue No. 1005 PC-d-e ODU MINI-SNAP PC Miniature Cylindrical Connectors with Push-Pull-Locking in Plastic ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr. 11, 84453 Mühldorf a. Inn, Germany Phone:

More information

QR/P8 SERIES. Ultra-small Rectangular Multi-electrode solderless Connectors for Rack and Panel Applications

QR/P8 SERIES. Ultra-small Rectangular Multi-electrode solderless Connectors for Rack and Panel Applications QR/P8 SERIES Ultra-small Rectangular Multi-electrode solderless Connectors for Rack and Panel Applications General QR/P8 Series is a series of small connectors for rack and panel application. This is a

More information

CTC Series. Environmentally sealed Cable to Cable interconnects

CTC Series. Environmentally sealed Cable to Cable interconnects CTC Series Environmentally sealed Cable to Cable interconnects Cable to Cable interconnects for the harshest environments The CTC Series was designed as a high-performance, cost-effective solution for

More information

CONEC SnapLock. 1 Introduction

CONEC SnapLock. 1 Introduction CONEC SnapLock E L E C T R O N I C C O N N E C T O R S 1 Introduction The new CONEC SnapLock locking system consists of D-SUB connectors and D-SUB hoods allowing quick and safe locking without any additional

More information

IP series Pushbutton switches for harsh environments - bushing Ø 12 mm - momentary

IP series Pushbutton switches for harsh environments - bushing Ø 12 mm - momentary Distinctive features and specifications UG1410A Illuminated or non-illuminated Tactile feedback Wide variety of configurations Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS

More information

Micro MATE-N-LOK 3 mm Connector System

Micro MATE-N-LOK 3 mm Connector System Product Facts Wire-to-wire and wire-toboard pin and receptacle connector system ontacts are on 3 mm [] centerline spacing -1 contact positions single row - contact positions dual row Panel mount or free-hanging

More information

HARAX circular connector

HARAX circular connector Show navigation HARAX circular connector Technical characteristics Specifications IEC 60 352-4 IEC 60 9475-2 Approvals HARAX M8-S/M12-S Rated voltage Rated current Diameter of individual strands Conductor

More information

INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION.

INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION. CONNECTORS 2014 INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION. Stelvio Kontek S.p.A. is one of the leading groups in the connectors market. With a solid background in the sector and having

More information

Electrical Components Catalog Nylon Cable Glands and Locknuts

Electrical Components Catalog Nylon Cable Glands and Locknuts Metric Cable Glands and Locknuts Technical Features Anti vibration cap Each gland comes complete with locknut Zero Halogen polyamide 6 Neoprene Seal Protection class to IP68 /5 bar Temperature range 30

More information

HARTING Ethernet Cabling 4-poles Overview

HARTING Ethernet Cabling 4-poles Overview Overview RJ45 Connectors [on page 8] System cables [on page 10] Distribution modules and Outlets [on page 20] HARTING PushPull Connectors [on page 22] System cables [on page 24] Panel feed-throughs [on

More information

SMASH The high density interconnect system for harsh environment applications

SMASH The high density interconnect system for harsh environment applications 66 Amphenol Board Level Interconnect products SMASH The high density interconnect system for harsh environment applications The SMASH connector offers extremely high robustness where signal integrity is

More information

QM (1.78mm-.070") CONNECTORS-"MICRO 70"

QM (1.78mm-.070) CONNECTORS-MICRO 70 QM (1.78mm-.070") CONNECTORS-"MICRO 70" General Designed to fill the needs of high density and miniature interconnection, the QM series are Super-Small IDC Connection. This IDC plug uses I/O Cable

More information

Degrees of protection. IP codes. W.M.M. Menheere Holec Holland N.V. The Netherlands

Degrees of protection. IP codes. W.M.M. Menheere Holec Holland N.V. The Netherlands Degrees of protection IP codes W.M.M. Menheere Holec Holland N.V. The Netherlands 1 INDEX Introduction...3 1. The IEC protection code (International Protection IP)...3 2. Interpreting the IP code...3 3.

More information

HIROSE ELECTRIC U.S.A. Fiber Optic VAR July, 2015

HIROSE ELECTRIC U.S.A. Fiber Optic VAR July, 2015 HIROSE ELECTRIC U.S.A. Fiber Optic VAR July, 2015 Fiber Optic VAR Program Hirose Launches Fiber Optic Cabling VAR Program to provide a complete fiber optic cable assembly and wire harness solutions to

More information