Material Safety Data Sheet

Transcription

1 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY / UNDERTAKING Product name Aluminium oxide (alpha), Nanopowder Product code NO-0050-HP Supplier IoLiTec Ionic Liquids Technologies GmbH Salzstrasse 184 D Heilbronn Germany Telephone +49 (0) Fax +49 (0) Emergency telephone +49 (0) msds@iolitec.de 2 HAZARDS IDENTIFICATION 2.1 Classification of the substance or mixture Classification (67/548/EEC or 1999/45/EC) Irritating to eyes, respiratory system and skin. Classification (REGULTATION (EC) No 1272/2008) Skin corrosion/irritation, Category 2, H315 Serious eye damage/eye irritation, Category 2, H319 Specific Target Organ Toxicity - Single exposure: Respiratory tract irritation, Category 3, H335 NO-0050-HP Page: 1/8

2 2.2 Label elements Labelling (67/548/EEC or 1999/45/EC) Hazard description: Label for supply Xi, Irritant Information pertaining to particular dangers for man and environment Risk phrases R36/37/38: Irritating to eyes, respiratory system and skin. Safety phrases S26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36: Wear suitable protective clothing. Labelling (REGULATION (EC) No 1272/2008, GHS) Hazard statements Warning H-phrases H315: Causes skin irritation. H319: Causes serious eye irritation. H335: May cause respiratory irritation. NO-0050-HP Page: 2/8

3 Precautionary statements P-phrases P261: Avoid breathing dust/fume/gas/mist/vapours/spray. P280: Wear protectic gloves/protective clothing/eye protection/face protection. P302 + P352: IF ON SKIN: Wash with plenty of soap and water. P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing 3 COMPOSITION / INFORMATION ON INGREDIENTS Ingredient name Aluminium oxide, 99 % CAS No Empirical Formula Al 2 O 3 Molecular weight amu 4 FIRST AID MEASURES General Inhalation Ingestion Contaminated clothing should be removed and washed before being reused. Move the exposed person to fresh air at once. If respiratory problems, artificial respiration/oxygen. Immediately rinse mouth and provide fresh air. Do not induce vomiting. Get medical attention immediately. NO-0050-HP Page: 3/8

4 Skin Eyes Wash the skin immediately with soap and water. Promptly wash eyes with plenty of water while lifting the eye lids. Continue to rinse for at least 15 minutes. Get medical attention immediately. Continue to rinse. 5 FIRE FIGHTING MEASURES Extinguishing media Special fire fighting procedures Unusual fire & explosion hazards Protective measures in fire Suitable: Water spray. Carbon dioxide, dry chemical powder, or appropriate foam. No special procedures required. Emission of toxic fumes Wear self-contained breathing apparatus as combustion may produce hazardous fumes. 6 ACCIDENTAL RELEASE MEASURES Personal precautions during spill Spill cleanup methods Wear protective clothing and avoid inhalation of powder, fume and vapor as well as skin or eye contact. Avoid contact with skin or inhalation of spillage, dust or vapor, Avoid dust formation. Collect and reclaim or dispose in sealed containers in license waste. Extinguish all ignition sources. Avoid sparks, flames, heat and smoking. Ventilate. NO-0050-HP Page: 4/8

5 7 HANDLING AND STORAGE Handling precautions Storage precautions Do not breathe dust. Avoid contact with eyes, skin, and clothing. Avoid prolonged or repeated exposure. Keep tightly closed. Product is very hygroscopic. Store in dry, well ventilated area. 8 EXPOSURE CONTROLS AND PERSONAL PROTECTION Protective equipment Process control measures Ventilation Respirators Safety goggles. Chemical resident gloves. Protective clothing. Protective mask. Provide eyewash station and safety shower. Use engineering controls to reduce air contamination to permissible exposure levels. Provide adequate general and local exhaust ventilation. Use high efficiency particulate respirator with appropriate filter. 9 PHYSICAL AND CHEMICAL PROPERTIES Appearance Solid Odor/taste No characteristic odor. PH ~10 Boiling Point 2,980 C Melting Point 2,038 C NO-0050-HP Page: 5/8

6 Flash Point Flammability Autoignition Temp Oxidizing Properties Explosive Properties Explosion Limits Vapor Pressure C SG/Density 4 g/cm 3 Partition Coefficient Viscosity Vapor Density Saturated Vapor Conc. Evaporation Rate Bulk Density Decomposition Temp. Solvent Content Water Content Surface Tension Conductivity Solubility in Water Insoluble 10 STABILITY AND REACTIVITY Stability Conditions to avoid No particular stability concerns. Strong acids and bases, Chlorine trifluoride, Ethylene oxide, Halocarbons, Oxygen difluoride, Sodium nitrate, Vinyl acetate. NO-0050-HP Page: 6/8

7 Hazardous Decomposition Products Consistency of decomposition products unknown. 11 TOXICOLOGICAL INFORMATION Ingestion Inhalation Skin Eyes Harmful if swallowed. May be harmful if inhaled. Material is irritating tomucous membranes and upper respiratory tract. May cause irritation and allergic reaction. May cause irritation and allergic reaction. 12 ECOLOGICAL INFORMATION 13 DISPOSAL CONSIDERATIONS Disposal method Contact specialist disposal companies. Dispose of in accordance with Local Authority requirements. Recover and reclaim or recycle, if practical. 14 TRANSPORT INFORMATION General Not classified as dangerous for transport purposes. UN No. 0 NO-0050-HP Page: 7/8

8 Road transport notes Rail transport notes Sea transport notes Air transport notes Not classified as dangerous for road transport. Not classified as dangerous for rail transport. Not classified as dangerous for sea transport. Not classified as dangerous for air transport. 15 REGULATORY INFORMATION In accordance with local and national regulations. 16 OTHER INFORMATION DISCLAIMER THE ABOVE INFORMATION IS BELIEVED TO BE CORRECT BUT DOES NOT PURPOSED TO BE ALL INCLUSIVE AND SHALL BE USED ONLY AS A GUIDE. IOLITEC SHALL NOT BE HELD LIABLE FOR ANY DAMAGE RESULTING FROM HANDLING OR FROM CONTACT WITH THE ABOVE PRODUCT. THIS INFORMATION RELATES ONLY TO THE SPECIFIC MATERIAL DESIGNATED AND MAY NOT BE VALID FOR SUCH MATERIAL USED IN COMBINATION WITH ANY OTHER MATERIALS OR ANY PROCESS. IT IS THE USERE S RESPONISIBILTY TO SATISFY HIMSELF AS TO THE SUITABILITY OF SUCH INFORMATION FOR HIS OWN PARTICULAR USE. IN NO WAY SHALL IOLITEC BE LIABLE FOR ANY CLAIMS, LOSSES OR DAMAGES OF ANY THIRD PARTY OR FOR THE LOST PROFITS OR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, HOWSOEVER ARISING, EVEN IF THE COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NO-0050-HP Page: 8/8