Control Transformers H-1
|
|
- Lesley Charles
- 7 years ago
- Views:
Transcription
1 - July 00 ontents Description Page Type MTA Type MT Type MTE Type MTK E Marked Power Supply Intelligent Technologies (IT.) A0000K
2 - Type MTA July 00 Type MTA Type MTA Transformer Product Description Varnish impregnated core and coil design. Suitable for indoor applications. Open core and coil design. Application Description Machine Tool and Industrial ontrol Transformers provide stepped-down voltages to machine tool control devices enabling control circuits to be isolated from all power and lighting circuits. This allows the use of grounded or ungrounded circuits that are independent of the power or lighting grounds; greater safety is afforded the operator. The control transformer line is particularly adaptable on applications where compact construction is demanded. Features, Benefits and Functions UL recognized component for units rated 00A and below. SA certified for units rated 00A and below. º rise, 0º insulation system. 0 z operation standard. 00% tested to verify product quality. Performance equals or exceeds requirements of ANSI/NEMA ST-. Regulation exceeds ANSI/NEMA requirements for all ratings. Each unit must pass rigid tests for turns ratio, insulation, continuity, and over potential. 0 00A ratings. Standards and ertifications Industry Standards All utler-ammer dry-type distribution and control transformers by Eaton orporation are built and tested in accordance with applicable NEMA, ANSI and IEEE Standards. Product Specifications Frequency utler-ammer Type MTA control transformers are designed for 0 ertz operation. Transformers required for other frequencies are available and must be specifically designed. Insulation System and Temperature Rise Industry standards classify insulation systems and rise as shown below: Table -. Insulation System lassification Ambient + Winding Rise ot Spot = Temp. lass The design life of transformers having different insulation systems is the same the lower temperature systems are designed for the same life as the higher temperature systems. Series-Multiple Windings Series-multiple windings consist of similar coils in each winding which can be connected in series or parallel (multiple). Transformers with seriesmultiple windings are designated with an X or / between the voltage ratings, such as voltages of 0/0 or 0 X 0. If the series-multiple winding is designated by an X, the winding can be connected only for a series or parallel. With the / designation, a mid-point also becomes available in addition to the series or parallel connection. As an example, a 0 X 0 winding can be connected for either 0 (parallel) or 0 (series), but a 0/0 winding can be connected for 0 (parallel), or 0 (series), or 0 with a 0 mid-point. The following pages provide listings for most standard transformer ratings and styles. For other ratings or styles not shown, refer to Eaton. A0000K
3 - July 00 Type MTA Overcurrent Protection Tables Overcurrent protection on both the primary and secondary sides of transformers are specified in UL 0 and the National Electrical ode. The maximum acceptable ratings are shown below. Due to high inrush currents present when a transformer is initially energized, it is recommended that the primary fuse be time delay to prevent nuisance trips during startup. Table -. Maximum Acceptable Rating of Primary Overcurrent Protection Primary VA Rating Voltage /0 () 0 /0 () 00 /0 (/0) 0 /0 (/0) 0 /0 (/) 0 /0 (/) 0 /0 (/) / (/0) 0 / (/0) 00 / (/0) /00 (/0) 0 /00 (/) 0 /00 (/) 0 /00 (/) 0 / (/0) / (/0) 00 / (/0) -/ () -/ () / (-/) /0 (-/) /0 (-/) /0 () /0 () / (/0) /0 (/0) /0 (/0) /0 (/0) /0 (/) /0 (/) /0 (/) / (/0) / (/0) /0 (/0) -/0 (-/0) -/0 () -/ (-/0) (-/0) (-/0) /0 (-/0) /0 (-/) /0 (-/) / (/0) / (/0) / (/0) / (/0) /0 (/0) /0 (/) /0 (/0) /0 (/0) /0 (/0) -/ () -/ () -/ (-/) -/0 (-/) -/ (-/) -/ () -/ () (-/0) / (-/) / (-/) /0 (-/) /0 (-/) /0 () /0 () / (/0) / (/0) / (/0) -/ (-/) -/ (-/) -/ (-/) (-/) (-/0) -/0 (-/0) -/0 () -/0 (-/) -/ (-/0) -/ (-/0) (-/0) (-/0) /0 (-/) /0 (-/) /0 (-/) / (-/) / (-/) () () () -/0 () -/ () -/ () -/ () (-/) -/ (-/) -/ (-/) -/0 (-/) -/ (-/) -/ () -/ () (-/0) (-/0) /0 (-/0) / (-/) -/ () -/0 (-/0) -/0 () () -/ () -/0 (-/0) -/0 () -/0 () -/0 (-/0) -/0 (-/) -/ (-/) -/ (-/) -/ () -/ () (-/) () (-/) -/ (-/) -/ (-/) -/0 () -/ (-/) -/ (-/) (-/) (-/0) -/0 (-/0) -/0 () -/0 (-/) -/ (-/) -/ (-/) () () (-/) (-/) () -/ (-/) -/ () -/ () -/ () -/ (-/) -/ (-/0) (-/) -/0 () -/0 () -/0 (-/0) / () -/ (-/) -/ (-/) -/ () -/0 () -/0 () () -/ () -/ () -/ () -/0 () -/0 () () () () (-/) (-/) (-/) -/ (-/) -/ 0 -/ / 0 -/ 0 0 Note: If the rated primary current is less than amperes, the maximum rating of the overcurrent device is 00% for power circuits, shown above, or 00% for control circuits, shown above (in brackets). If the rated primary current is amperes or more, the maximum rating of the overcurrent device is 0%. All figures assume secondary overcurrent protection per NE/UL. References: NE 0- (c) exception, 0- (b) &, UL 0., UL. and.. Table -. Maximum Acceptable Rating of Secondary Overcurrent Protection Secondary VA Rating Voltage / -/0 /0 /0 /0 /0 /0 /0 /00 /00 /00 -/0 /0 /0 /0 / /0 /0 /0 /0 /0 0 -/ -/ -/ -/ / / / -/ -/0 -/0 -/0 -/ -/0 -/ / /0 / / -/ -/ -/ -/ 0 -/ -/ -/0 -/0 -/ -/ -/0 -/ -/ -/ -/0 -/0 -/0 -/0 0 -/ 0 -/ -/0 -/ -/ -/ 0 -/ -/ -/ -/ -/ / Note: If the rated secondary current is less than amperes, the maximum rating of the overcurrent device is %; amperes or more, the maximum rating of the overcurrent device is %. If % does not correspond to a standard fuse rating, the next highest standard rating may be used. References: NE 0- (c) exception, 0- (b) &, UL 0., UL. and.. A0000K
4 - Types MTA, MT July 00 Wiring Diagrams Type MTA and MT Table -. Wiring for Diagram Volts onnect Lines A B Table -. Wiring for Diagram Volts onnect Lines A B Type AP Table -. Wiring for Diagram Volts onnect Lines A B 0 0 to to and to - - X-X to to and to X to X X to X and X to X - - X-X X-X to to and to X to X X to X and X to X - - X-X X-X Figure -. Diagram Table -. Wiring for Diagram Volts onnect Lines A B 0 0 X 0 0 X to to to and to to and to X-X X-X X X X X Figure -. Diagram Table -. Wiring for Diagram Volts onnect Lines A B - X-X X X X X Figure -. Diagram X X X X X Figure -. Diagram Figure -. Diagram A0000K
5 July 00 Type MTA - Product Selection Table -. Type MTA VA Dimensions (Inches) Weight Dimensions (mm) Weight Frame eight Width Depth Lbs. eight Width Depth kg 0/olts to Volts, 0 z 0 (Use Type MT 000A) / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ 0/olts to /olts, 0 z / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ 0-/ -/ -/ -/ -/ -/ -/ -/ -/ -/ 0-/ FR0 FR FR0 FR FR FR0 FR FR FR FR FR FR FR FR FR0 FR0 FR FR0 FR FR FR FR FR0 FR FR FR FR FR FR See Page - for Wiring Diagrams. Note: For additional information, refer to the utler-ammer Industrial ontrol Transformer Binder BA. Wiring Diagram Style 00AF 000AF 00AF 000AF 00AF 000AF 00AF 000AF 00AF 000AF 00AF 000AF 000AF 000AF 000AG 00AG 000AG 00AG 000AG 00AG 000AG 00AG 000AG 00AG 000AG 00AG 000AG 000AG 000AG Price For other ratings or styles not shown, refer to Eaton. Discount Symbol M A0000K
6 - Type MTA July 00 Table -0. Type MTA VA Dimensions (Inches) Weight Dimensions (mm) eight Width Depth Lbs. eight Width Depth 0/0/ Volts to / Volts, 0/0 z / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Volts to Volts, 0/0 z / -/ -/ -/ -/ / -/ -/ -/ -/ -/ -/ -/ -/ 0/0/ Volts to / Volts, 0/0 z / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Weight kg Frame FR FR FR FR FR FR FR0 FR FR FR FR FR See Page - for Wiring Diagrams. Note: For additional information, refer to the utler-ammer Industrial ontrol Transformer Binder BA FR0 FR FR FR FR FR FR FR FR0 FR FR FR FR Wiring Diagram A A A A A A A A A A A A B B B B B B B B B B B B B Style 000A 00A 000A 00A 000A 00A 000A 00A 000A 00A 000A 00A 000AB 000AB 000AB 000AD 000AD 00AD 000AD 00AD 000AD 000AD 00AD 000AD 00AD Price For other ratings or styles not shown, refer to Eaton. Discount Symbol M A0000K
7 - July 00 Type MT Type MT Type MT Transformers Product Description Varnish impregnated core and coil design. Suitable for indoor applications. Application Description Transformers provide stepped down voltages to machine tool control devices enabling control circuits to be isolated from all power and lighting circuits. This allows the use of grounded or ungrounded circuits that are independent of the power or lighting grounds; greater safety is afforded the operator. The control transformer line is particularly adaptable on applications where compact construction is demanded. The MT line is similar to the MTA line except it provides increased regulation. Features, Benefits and Functions Designed specifically for loads requiring extremely good regulation 0% 00% better regulation than Type MTA. UL recognized component for units rated 00A and below. SA certified for units rated 00A and below. 0/0 z operation standard. 00% tested to verify product quality. Each unit must pass rigid tests for turns ratio, insulation, continuity, and over potential. Performance equals or exceeds requirements of ANSI/NEMA ST-. Regulation exceeds ANSI/NEMA requirements for all ratings. 0 00A ratings. º rise, 0º insulation system. Standards and ertifications Industry Standards All utler-ammer dry-type distribution and control transformers by Eaton orporation are built and tested in accordance with applicable NEMA, ANSI and IEEE Standards. Product Specifications Frequency utler-ammer standard dry-type distribution transformers are designed for 0 z operation. Transformers required for other frequencies are available and must be specifically designed. Insulation System and Temperature Rise Industry standards classify insulation systems and rise as shown below: Table -. Insulation System lassification Ambient + Winding Rise ot Spot = Temp. lass The design life of transformers having different insulation systems is the same the lower temperature systems are designed for the same life as the higher temperature systems. Series-Multiple Windings Series-multiple windings consist of similar coils in each winding which can be connected in series or parallel (multiple). Transformers with series-multiple windings are designated with an X or / between the voltage ratings, such as voltages of 0/0 or 0 X 0. If the series-multiple winding is designated by an X, the winding can be connected only for a series or parallel. With the / designation, a mid-point also becomes available in addition to the series or parallel connection. As an example, a 0 X 0 winding can be connected for either 0 (parallel) or 0 (series), but a 0/0 winding can be connected for 0 (parallel), or 0 (series), or 0 with a 0 mid-point. The following pages provide listings for most standard transformer ratings and styles. For other ratings or styles not shown, refer to Eaton. A0000K
8 - Industrial Type MT July 00 Product Selection Table -. Type MT VA Dimensions (Inches) Weight Dimensions (mm) eight Width Depth Lbs. eight Width Depth 0/olts to olts, 0 z 0/olts to Volts, 0/0 z 0/olts to olts, 0/0 z / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Weight kg See Page - for Wiring Diagrams. Note: For additional information, refer to the utler-ammer Industrial ontrol Transformer Binder BA. Table -. Type MT with Integrally Mounted 0 Amperes, 00 volt lass with -Pole Primary Fuse Block for Rejection Type Fuses (Fuses Not Included) 0 VA Dimensions (Inches) Weight Dimensions (mm) eight Width Depth Lbs. eight Width Depth 0/olts to olts, 0 z 0/olts to Volts, 0/0 z 0/olts to olts, 0/0 z / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Weight kg Frame FR0 FR FR FR FR FR FR FR FR FR FR FR FR FR FR Frame FR0 FR FR FR FR FR FR FR FR FR FR FR FR See Page - for Wiring Diagrams. Note: For additional information, refer to the utler-ammer Industrial ontrol Transformer Binder BA. Wiring Diagram Wiring Diagram Style 000A 00A 000A 00A 000A 00A 000A 00A 000A 00A 000A 00A 000A 000A 000A Style 000AFB 00AFB 000AFB 00AFB 000AFB 00AFB 000AFB 00AFB 000AFB 00AFB 000AFB 00AFB 000AFB Price Price Discount Symbol M A0000K
9 July 00 Industrial Type MTE - Type MTE Type MTE Transformers Product Description Epoxy-encapsulated coils. Application Description Transformers provide stepped down voltages to machine tool control devices enabling control circuits to be isolated from all power and lighting circuits. This allows the use of grounded or ungrounded circuits that are independent of the power or lighting grounds; greater safety is afforded the operator. The control transformer line is particularly adaptable on applications where compact construction is demanded. Note: The MTG, open core-coil design has been superseded by the epoxyencapsulated core-coil design MTE with no change to dimensions or functionality. Features, Benefits and Functions UL listed. SA certified. Epoxy encapsulated. Laminations of high quality silicon steel to minimize core losses and optimize performance. opper magnet wire for high quality, efficient operation. Secondary fuse clips where applicable. Optional primary fusing. Molded in terminals. 0/0 z operation. rise, 0º insulation system. Performance meets/exceeds requirements of ANSI/NEMA ST-. Regulation exceeds ANSI/NEMA requirements for all ratings. 0A ratings. Moulded-in terminals for maximum durability. Standards and ertifications Industry Standards All utler-ammer dry-type distribution and control transformers by Eaton orporation are built and tested in accordance with applicable NEMA, ANSI, and IEEE Standards. All 00 volt class transformers are UL listed unless otherwise noted. Options and Accessories Primary Fuse Kit The primary fuse kit includes a -pole class fuse block, instructions, and all associated mounting and wiring hardware. Fuses are not included. When installed, the primary fuse kit will add a maximum of / inch to the transformer depth and -/ inches to the transformer height. Finger-Safe Terminal overs (Optional) Fits E marked designs 0 A. Fits MTE designs. A. Table -. Finger-Safe Terminal overs Description atalogue Price Terminal Transformers Terminal Transformers Finger-Safe Terminal overs FSK Finger-Safe Terminal overs FSK Finger-Safe Primary Fuse Block overs Fits -pole primary fuse blocks on MTE designs. Table -. Finger-Safe Primary Fuse Block overs Description atalogue Price Primary Fuse Block overs FSK FSK FSKFB Table -. Primary Fuse Kit Description atalogue Price Primary Fuse Kit PFK Note: 00A and larger are lass 0 Insulation System. Finger-Safe Primary Fuse Block overs Discount Symbol M A0000K
10 -0 Type MTE July 00 Product Specifications Insulation System and Temperature Rise Industry standards classify insulation systems and rise as shown below: Table -. Insulation System lassification Ambient + Winding Rise + ot Spot = Temp. lass Wiring Diagrams The design life of transformers having different insulation systems is the same the lower temperature systems are designed for the same life as the higher temperature systems. Figure -. Diagram Figure -. Diagram Series-Multiple Windings Series-multiple windings consist of similar coils in each winding which can be connected in series or parallel (multiple). Transformers with seriesmultiple windings are designated with an X or / between the voltage ratings, such as voltages of 0/0 or 0 X 0. If the series-multiple winding is designated by an X, the winding can be connected only for a series or parallel. With the / designation, a mid-point also becomes available in addition to the series or parallel connection. As an example, a 0 X 0 winding can be connected for either 0 (parallel) or 0 (series), but a 0/0 winding can be connected for 0 (parallel), or 0 (series), or 0 with a 0 mid-point. Figure -. Diagram Figure -0. Diagram Figure -. Diagram Figure -. Diagram A0000K
11 July 00 Type MTE - Wiring Diagrams 0,,0 0,0, 0,00, V 0,0, Figure -. Diagram X X X X X X X X X X X X // 0,, X X X Figure -. Diagram Figure -. Diagram V 0 0 V Figure -. Diagram V V X X X X X V V V Figure -. Diagram 0 X Figure -0. Diagram V 0 Figure -. Diagram V V X X X X X V V V X Figure -. Diagram Figure -. Diagram Figure -. Diagram 0 A0000K
12 - Type MTE July 00 Product Selection Table -. Type MTE Product Selection VA Dimensions (Inches) Weight Dimensions (mm) eight Width Depth Lbs. eight Width Depth Primary: 0 x 0, 0 x 0, 0 x 0 with Jumpers Secondary: 0//0 with Fuse lips for / x -/ Fuses / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Primary: 0 x 0 with Jumpers Secondary: with Fuse lips for / x -/ Fuses (through 0A) / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Primary: 0 x 0 with Jumpers Secondary: with Fuse lips for / x -/ Fuses / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Primary: 0/ Secondary: 0 with Fuse lips for / x -/ Fuses / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Weight kg Wiring Diagram See Page -0 for Wiring Diagrams. Note: For additional information, refer to the utler-ammer Industrial ontrol Transformer Binder BA Style 00EA 000EA 00EA 000EA 00EA 000EA 00EA 000EA 00EA 000EA 00EA 000EA 00EA 000EB 00EB 000EB 00EB 000EB 00EB 000EB 00EB 000EB 00EB 000EB 00EB 000EB 00EB 000EB 00EB 000EB 00EB 000EB 000EA 00EA 000EA 00EA 000EA 00EA 000EA 00EA 000EA 00EA Price For other ratings or styles not shown, refer to Eaton. Discount Symbol M A0000K
13 July 00 Type MTE - Table -. Type MTE Product Selection VA Dimensions (Inches) Weight Dimensions (mm) eight Width Depth Lbs. eight Width Depth Primary: 0 x 0 with Jumpers Secondary: 0 x 0 with Jumpers, Secondary Fuse lips not Applicable / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Primary: 0//00 Secondary: 0//0 with for / x -/ Fuses / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Primary: 0/00/ Secondary: // with Fuse lips for / x -/ Fuses / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Primary: 0//00 Secondary: // with Fuse lips for / x -/ Fuses / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ / -/ -/ -/ -/ -// Weight kg Wiring Diagram See Page - for Wiring Diagrams. Secondary fuse clips are not available on this atalogue number. Note: For additional information, refer to the utler-ammer Industrial ontrol Transformer Binder BA Style 000EXX 00EXX 000EXX 00EXX 000EXX 00EXX 000EXX 00EXX 000EXX 00EXX 000E 00E 000E 00E 000E 00E 000E 00E 000E 00E 000E 00E 000E 00E 000E 00E 000E 00E 000E 000EW 00EW 000EW 00EW 000EW 00EW 000EW 00EW 000EW 00EWXX Price For other ratings or styles not shown, refer to Eaton. Discount Symbol M A0000K
14 - Type MTE July 00 Table -0. Types MTE Product Selection VA Dimensions (Inches) Weight Dimensions (mm) eight Width Depth Lbs. eight Width Depth Primary: 0/0/ Secondary: / with Fuse lips for / x -/ Fuses / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Primary: 0/00/ Secondary: 0 x 0 with Jumpers; Fuse lips not Applicable / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Primary: 00/0/0, 0/0/0, 0/0 Secondary: /0, /, /0 with Fuse lips for / x -/ Fuses / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Universal Design (MTE Epoxy Encapsulated) Primary: 0//0/00, 0/00/0/, 0/0/0/0, 0/00 Secondary: /0/0, //, /0/0, /00/0 with Fuse lips for / x -/ Fuses / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Weight kg Wiring Diagram Style See Pages -0 and - for Wiring Diagrams. Type MTG Open ore-oil Universal Design has been superseded by Type MTE Epoxy Encapsulated Universal Design with no changes to form, fit or function. Type MTE Epoxy Encapsulated Universal Design. Note: For additional information, refer to the utler-ammer Industrial ontrol Transformer Binder BA E 00E 000E 00E 000E 00E 000E 00E 000E 00E 000ED 00ED 000ED 00ED 000ED 00ED 000ED 00ED 000ED 00ED 000EE 00EE 000EE 00EE 000EE 00EE 000EE 00EE 000EE 000EU 000EU 00EU 00EU 00EU 000EU 00EU Price For other ratings or styles not shown, refer to Eaton. Discount Symbol M A0000K
15 July 00 Type MTE - Table -. Transformers with Primary Fuse Blocks Product Selection VA Dimensions (Inches) Weight Dimensions (mm) eight Width Depth Lbs. eight Width Depth Weight kg Primary: 0 x 0, 0 x 0, 0 x 0 with Jumpers and Two-Pole Primary Fuse Block for Rejection Type Fuses Secondary: 0//0 with Fuse lips for / x -/ Fuses / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Primary: 0 x 0 with Jumpers and Two-Pole Primary Fuse Block for Rejection Type Fuses Secondary: with Fuse lips for / x -/ Fuses / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Primary: 0 x 0 with Jumpers and Two-Pole Primary Fuse Block for Rejection Type Fuses Secondary: with Fuse lips for / x -/ Fuses / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ / / / / / / Primary: 0/ with Two-Pole Primary Fuse Block for Rejection Type Fuses Secondary: 0 with Fuse lips for / x -/ Fuses / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Wiring Diagram See Page -0 for Wiring Diagrams. Note: For additional information, refer to the utler-ammer Industrial ontrol Transformer Binder BA Style 000EAFB 00EAFB 000EAFB 00EAFB 000EAFB 00EAFB 000EAFB 00EAFB 000EAFB 00EAFB 000EAFB 00EAFB 000EBFB 00EBFB 000EBFB 00EBFB 000EBFB 00EBFB 000EBFB 00EBFB 000EBFB 000EBFB 00EBFB 000EBFB 00EBFB 000EBFB 00EBFB 000EBFB 00EBFB 000EBFB 000EAFB 00EAFB 000EAFB 00EAFB 000EAFB 00EAFB 000EAFB 00EAFB 000EAFB Price For other ratings or styles not shown, refer to Eaton. Discount Symbol M A0000K
16 - Type MTE July 00 Table -. Transformers with Primary Fuse Blocks Product Selection VA Dimensions (Inches) Weight Dimensions (mm) eight Width Depth Lbs. eight Width Depth Primary: 0//00 with Two-Pole Primary Fuse Block for Rejection Type Fuses Secondary: 0//0 with Fuse lips for / x -/ Fuses / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ / / / / / Primary: 0/00/ with Two-Pole Primary Fuse Block for Rejection Type Fuses Secondary: // with Fuse lips for / x -/ Fuses / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Weight kg Wiring Diagram See Page - for Wiring Diagrams. Note: For additional information, refer to the utler-ammer Industrial ontrol Transformer Binder BA. Primary: 0//00 with Two-Pole Primary Fuse Block for Rejection Type Fuses Secondary: // with Fuse lips for / x -/ Fuses / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Style 000EFB 00EFB 000EFB 00EFB 000EFB 00EFB 000EFB 00EFB 000EFB 00EFB 000EFB 00EFB 000EFB 00EFB 000EFB 00EFB 000EWFB 00EWFB 000EWFB 00EWFB 000EWFB 00EWFB Price For other ratings or styles not shown, refer to Eaton. Discount Symbol M A0000K
17 July 00 Type MTE - Table -. Transformers with Primary Fuse Blocks Product Selection VA Dimensions (Inches) Weight Dimensions (mm) eight Width Depth Lbs. eight Width Depth Primary: 0/0/ with Two-Pole Primary Fuse Block for Rejection Type Fuses Secondary: / with Fuse lips for / x -/ Fuses / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Primary: 0/00/ with Two-Pole Primary Fuse Block for Rejection Type Fuses Secondary: 0 x 0 with Jumpers; Fuse lips Not Available / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Weight kg Wiring Diagram Style See Pages -0 and - for Wiring Diagrams. Type MTG Open ore-oil Universal Design has been superseded by Type MTE Epoxy Encapsulated Universal Design with no changes to form, fit or function. Type MTE Epoxy Encapsulated Universal Design. Note: For additional information, refer to the utler-ammer Industrial ontrol Transformer Binder BA Primary: 00/0/0, 0/0/0, 0/0 with Two-Pole Primary Fuse Block for Rejection Type Fuses Secondary: /0, /, /0 with Fuse lips for / x -/ Fuses / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Universal Design (MTE Epoxy Encapsulated) Primary: 0//0/00, 0/00/0/, 0/0/0/0, 0/00 with Two-Pole Primary Fuse Block for Rejection Type Fuses Secondary: /0/0, //, /0/0, /00/0 with Fuse lips for / x -/ Fuses / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ EFB 00EFB 000EFB 00EFB 000EFB 00EFB 000EFB 00EFB 000EFB 000EDFB 00EDFB 000EDFB 00EDFB 000EDFB 00EDFB 000EDFB 00EDFB 000EDFB 000EEFB 00EEFB 000EEFB 00EEFB 000EEFB 00EEFB 000EEFB 00EEFB 000EEFB 000EUFB 000EUFB 00EUFB 00EUFB 00EUFB 000EUFB Price For other ratings or styles not shown, refer to Eaton. Discount Symbol M A0000K
18 - Type MTK July 00 Type MTK Type MTK Transformers Product Description Epoxy resin-impregnated coil. Economical solution for high inrush applications. Application Description Transformers provide stepped down voltages to machine tool control devices enabling control circuits to be isolated from all power and lighting circuits. This allows the use of grounded or ungrounded circuits that are independent of the power or lighting grounds; greater safety is afforded the operator. The control transformer line is particularly adaptable on applications where compact construction is demanded. Features, Benefits and Functions UL listed. SA certified. Epoxy resin impregnated coil design. opper magnet wire for high quality, efficient operation. 0/0 z operation. rise, 0º insulation system. Performance meets/exceeds requirements of ANSI/NEMA ST-. Regulation exceeds ANSI/NEMA requirements for all ratings A ratings. Standards and ertifications Industry Standards All utler-ammer dry-type distribution and control transformers by Eaton orporation are built and tested in accordance with applicable NEMA, ANSI, and IEEE Standards. All 00 volt class transformers are UL listed unless otherwise noted. Product Specifications Insulation System and Temperature Rise Industry standards classify insulation systems and rise as shown below: Table -. Insulation System lassification Ambient + Winding Rise ot Spot = Temp. lass The design life of transformers having different insulation systems is the same the lower temperature systems are designed for the same life as the higher temperature systems. Series-Multiple Windings Series-multiple windings consist of similar coils in each winding which can be connected in series or parallel (multiple). Transformers with series-multiple windings are designated with an X or / between the voltage ratings, such as voltages of 0/0 or 0 X 0. If the series-multiple winding is designated by an X, the winding can be connected only for a series or parallel. With the / designation, a mid-point also becomes available in addition to the series or parallel connection. As an example, a 0 X 0 winding can be connected for either 0 (parallel) or 0 (series), but a 0/0 winding can be connected for 0 (parallel), or 0 (series), or 0 with a 0 mid-point. The following pages provide listings for most standard transformer ratings and styles. For other ratings or styles not shown, refer to Eaton. A0000K
19 July 00 Type MTK - Wiring Diagrams Figure -. Diagram Figure -. Diagram Figure -0. Diagram Figure -. Diagram Figure -. Diagram Figure -. Diagram 0 Figure -. Diagram X X X X X X X X X X X X Figure -. Diagram Figure -. Diagram Figure -. Diagram Figure -. Diagram A0000K
20 -0 Type MTK July 00 Wiring Diagrams 0 V 0,,0 0,0, 0,00, V 0,0, V 0 X V V V Figure -. Diagram X // 0,, X X X Figure -. Diagram V V X X X X Figure -. Diagram 0 V 0 X V V V Figure -. Diagram X V V X X X X Figure -. Diagram A0000K
21 July 00 Type MTK - Product Selection Table -. Type MTK Product Selection VA Dimensions (Inches) Weight Dimensions (mm) eight Width Depth Lbs. eight Width Depth Primary: 0 x 0, 0 x 0, 0 x 0 Secondary: 0// Primary: 0/ Secondary: / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ 0-/ Primary: 0/0/ Secondary: / / -/ -/ -/ -/ Primary: 0/0/ Secondary: / / -/ -/ -/ 0-/ Primary: 0//00 Secondary: 0// / -/ -/ -/ 0-/ Primary: 0/00/ Secondary: 0 x / -/ -/ -/ 0-/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ 0-/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ 0-/ -/ -/ -/ -/ 0-/ Weight kg Wiring Diagram See Page - and for Wiring Diagrams. Note: For additional information, refer to the utler-ammer Industrial ontrol Transformer Binder BA Style 000KA 00KA 000KA 00KA 000KA 000KA 000KA 000KA 00KA 000KA 000KA 000KA 000K 00K 000K 000K 000K 000KD 00KD 000KD 000KD 000KD 000K 00K 000K 000K 000K 000KD 00KD 000KD 000KD 000KD Price For other ratings or styles not shown, refer to Eaton. Discount Symbol M A0000K
22 - Type MTK July 00 Table -. Type MTK Product Selection VA Dimensions (Inches) Weight Dimensions (mm) eight Width Depth Lbs. eight Width Depth Primary: 0 x 0 with Jumpers Secondary: 0 x 0 with Jumpers, Secondary Fuse lips Not Applicable / -/ -/ -/ -/ -/ -/ -/ Primary: 0 x 0 with Jumpers Secondary: / -/ -/ -/ -/ -/ -/ -/ Primary: 0//0/00, 0/00/0/, 0/0/0/0, 0/00 Secondary: /0/0, //, /0/0, /00/ / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ 0-/ Weight kg Wiring Diagram See Page - for Wiring Diagrams. Note: For additional information, refer to the utler-ammer Industrial ontrol Transformer Binder BA Style 000KXX 00KXX 000KXX 000KXX 000KXX 00KB 000KB 000KU 00KU 000KU 000KU 000KU Price For other ratings or styles not shown, refer to Eaton. Discount Symbol M A0000K
23 - July 00 E Marked E Marked Terminal Type A Application Description Transformers provide stepped down voltages to machine tool control devices enabling control circuits to be isolated from all power and lighting circuits. This allows the use of grounded or ungrounded circuits that are independent of the power or lighting grounds; greater safety is afforded the operator. The control transformer line is particularly adaptable on applications where compact construction is demanded. Features, Benefits and Functions Type MTE E marked units comply with IE EN--. UL listed. SA certified. Epoxy encapsulated coil design. opper magnet wire for high quality, efficient operation. Laminations of high quality silicon steel to minimize core losses and optimize performance. Moulded-in terminals. 0/0 z operation. rise, class 0 insulation. Performance meets/exceeds requirements of ANSI/NEMA ST-. Regulation exceeds ANSI/NEMA requirements for all ratings. Non-short circuit proof transformer, isolation type. Type MTK E marked units comply with IE EN--. UL listed. SA certified. Epoxy resin-impregnated coil design. opper magnet wire for high quality, efficient operation. 0/0 z operation. rise, 0 insulation system. Performance meets/exceeds requirements of ANSI/NEMA ST-. Regulation exceeds ANSI/NEMA requirements for all ratings A ratings. Standards and ertifications Industry Standards All utler-ammer dry-type distribution and control transformers by Eaton orporation are built and tested in accordance with applicable NEMA, ANSI, and IEEE Standards. All 00 volt class transformers are UL listed unless otherwise noted. Finger-Safe Terminal overs (Optional) Fits E marked designs 0 A. Fits MTE designs A. Table -. Finger-Safe Terminal overs Description atalogue Price Terminal Transformers Terminal Transformers Finger-Safe Terminal overs FSK Finger-Safe Terminal overs FSK Finger-Safe Primary Fuse Block overs Fits -pole primary fuse blocks on MTE designs. Table -. Finger-Safe Primary Fuse Block overs Description atalogue Price Primary Fuse Block overs FSK FSK FSKFB Options and Accessories Protection Index IP00 When terminal covers are installed on primary and secondary, and fuse block covers are used, the Protection Index is IP0. Finger-Safe Primary Fuse Block overs Discount Symbol M A0000K
24 - E Marked July 00 Product Specifications Overload apability Short-term overload is designed into transformers as required by ANSI. Basically, dry-type distribution transformers will deliver 00% nameplate load for one-half hour; 0% load for one-hour; and % load for four-hours without being damaged provided that a constant 0% load precedes and follows the overload. See ANSI.-0.0 for additional limitations. ontinuous overload capacity is not deliberately designed into a transformer because the design objective is to be within the allowed winding temperature rise with nameplate loading. Insulation System and Temperature Rise Industry standards classify insulation systems and rise as shown below: Table -. Insulation System lassification Ambient + Winding Rise + ot Spot = Temp. lass Wiring Diagrams Figure -. Diagram Figure -. Diagram Figure -. Diagram The design life of transformers having different insulation systems is the same the lower temperature systems are designed for the same life as the higher temperature systems. Series-Multiple Windings Series-multiple windings consist of similar coils in each winding which can be connected in series or parallel (multiple). Transformers with seriesmultiple windings are designated with an X or / between the voltage ratings, such as voltages of 0/0 or 0 X 0. If the series-multiple winding is designated by an X, the winding can be connected only for a series or parallel. With the / designation, a mid-point also becomes available in addition to the series or parallel connection. As an example, a 0 X 0 winding can be connected for either 0 (parallel) or 0 (series), but a 0/0 winding can be connected for 0 (parallel), or 0 (series), or 0 with a 0 mid-point. Figure -0. Diagram Figure -. Diagram Figure -. Diagram A0000K
25 July 00 E Marked - Wiring Diagrams 0,,0 0,0, 0,00, V 0,0, 0V Figure -. Diagram X X X X X X X X X X X X // 0,, X X X Figure -. Diagram Figure -. Diagram V 0 0 V Figure -. Diagram V V X X X X X V V V Figure -. Diagram X Figure -. Diagram V 0 0 Figure -. Diagram V V X X X X X V V V X Figure -. Diagram Figure -0. Diagram Figure -. Diagram 0 A0000K
26 - E Marked July 00 Product Selection Table -0. Type MTE E Marked IP00 VA Dimensions (Inches) Weight Dimensions (mm) eight Width Depth Lbs. eight Width Depth Primary: 0 x 0, 0 x 0, 0 x 0 with Jumpers Secondary: 0// / -/ -/ -/ -/ -/ -/ Primary: 0 x 0 with Jumpers Secondary: / -/ -/ -/ -/ -/ -/ Primary: 0 x 0 with Jumpers Secondary: / -/ Primary: 0//00 Secondary: 0// / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Weight kg See Pages - and - for Wiring Diagrams. Note: Transformers are designed to operate in a maximum ambient of 0. Note: ontact your local Eaton sales office for availability on additional E Marked control transformers. Wiring Diagram Style E000EAE E00EAE E000EAE E00EAE E000EAE E00EAE E000EAE E00EAE E000EAE E00EAE E000EBE E00EBE E000EBE E00EBE E000EBE E00EBE E000EBE E00EBE E000EBE E00EBE E000EBE E00EBE E000EBE E00EBE E000EBE E00EBE E000EBE E00EBE E000EBE E00EBE E000EE E00EE E000EE E00EE E000EE E00EE E000EE E00EE E000EE E00EE Price For other ratings or styles not shown, refer to Eaton. Discount Symbol M A0000K
27 July 00 E Marked - Table -. Type MTE E Marked IP00 VA Dimensions (Inches) Weight Dimensions (mm) eight Width Depth Lbs. eight Width Depth Primary: 0/00/ Secondary: 0 x 0 with Jumpers / -/ -/ -/ -/ -/ Primary: 00/0/0, 0/0/0, 0/0 Secondary: /0, /, / / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Weight kg See Pages - and - for Wiring Diagrams. Note: Transformers are designed to operate in a maximum ambient of 0. Note: ontact your local Eaton sales office for availability on additional E Marked control transformers. Wiring Diagram Style E000EDE E00EDE E000EDE E00EDE E000EDE E00EDE E000EDE E00EDE E000EDE E00EDE E000EEE E00EEE E000EEE E00EEE E000EEE E00EEE E000EEE E00EEE E000EEE Price For other ratings or styles not shown, refer to Eaton. Discount Symbol M A0000K
28 - E Marked July 00 Factory Mounted Finger-Safe Terminal overs Terminal Type A Terminal Type B Terminal Type Table -. Type MTK E Marked with Factory Mounted Finger-Safe Terminal overs IP0 VA Dimensions (Inches) Weight Dimensions (mm) eight Width Depth Lbs. eight Width Depth Primary: 0 x 0, 0 x 0, 0 x 0 with Jumpers Secondary: 0// / -/ -/ -/ -/ Primary: 0 x 0 with Jumpers Secondary: / -/ -/ -/ -/ -/ -/ Primary: 0 x 0 with Jumpers Secondary: / -/ -/ -/ -/ -/ -/ Primary: 00/0/0, 0/0/0, 0/0 Secondary: /0, /, / / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ 0 -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Primary: 0/0/0/0, 0/00/0/, 0//0/00 Secondary: /0, /, / / -/ -/ -/ -/ / -/ -/ -/ -/ / -/ -/ -/ -/ -/ Weight kg Terminal Type See Pages - and - for Wiring Diagrams. Note: For additional information, refer to the utler-ammer Industrial ontrol Transformer Binder BA. Note: ontact your local Eaton sales office for availability on additional E Marked control transformers. A A A A A A B B B B B B B B Wiring Diagram Style E00KAEFS E000KAEFS E00KAEFS E000KAEFS E00KAEFS E000KAEFS E00KAEFS E000KAEFS E000KAEFS E000KAEFS E00KBEFS E000KBEFS E00KBEFS E000KBEFS E00KBEFS E000KBEFS E00KBEFS E000KBEFS E00KBEFS E000KBEFS E00KBEFS E000KBEFS E00KEEFS E000KEEFS E00KEEFS E000KEEFS E00KEEFS E000KEEFS E00KUEFS E000KUEFS E00KUEFS E000KUEFS E00KUEFS E000KUEFS Price Discount Symbol M A0000K
29 July 00 Industrial E Marked - Table -. Type MTK E Marked with Factory Mounted Finger-Safe Terminal overs IP0 VA Dimensions (Inches) Weight Dimensions (mm) eight Width Depth Lbs. eight Width Depth Primary: 0/0/00/0/ Secondary: // / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ 0-/ Primary: 0//0/00, 0/00/0/, 0/0/0/0, 0/00 Secondary: /0/0, //, /0/0, /00/ / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ Weight kg Terminal Type See Pages - and - for Wiring Diagrams. volt secondary only available through 00A. Note: For additional information, refer to the utler-ammer Industrial ontrol Transformer Binder BA. Note: ontact your local Eaton sales office for availability on additional E Marked control transformers. B B B B B A A A A A A A B B Wiring Diagram Style E00KVEFS E000KVEFS E00KVEFS E000KVEFS E00KVEFS E000KVEFS E00KWEFS E000KWEFS E000KWEFS E000KWEFS E00KUEFS E000KUEFS E00KUEFS E000KUEFS E00KUEFS E000KUEFS E00KUEFS E000KUEFS E000KUEFS Pricing Discount Symbol M A0000K
30 -0 E Marked July 00 Table -. Acceptable Rating of Primary Overcurrent Protection for E Marked Fuses 0 x mm (/ x -/ ) Time-lag (IE ) Sec. Voltage Table -. Acceptable Maximum Rating of Secondary Overcurrent Protection Miniature Fuses x 0 mm Time-lag (IE -/III) Sec. Voltage Note: For values over.a use 0 x mm time-lag (IE - --). T a = 0 ontrol Type. A0000K
31 July 00 Power Supply Intelligent Technologies (IT.) - Features Benefits IT. Power Supplies Product Description The utler-ammer Intelligent Technologies (IT.) line of Power Supplies from Eaton s electrical business is designed to work in a variety of applications. These include as the power supply to the IT. line of power control products. They also work in most ontrol applications which require V D. All of the IT. power supplies are designed to provide the highest outrush current in the industry for units of their size. It is also the only line to provide 0 0V A input voltage down to the smallest current units. Application Description Wide range voltage input (0 00V A operating) igh current outrush capability in all units Semiconductor F approved Long ride-through capability designed in Wide operating temperature range Power Supplies can be used in parallel (.A and greater) Multiple V D terminals for easy wiring DIN rail and panel mount available in most units Removable terminal connections IP0 fingerproof design Larger units have Active power factor correction Adjustable output voltages Fault contacts Analogue outputs V D control enhances personnel and equipment safety. IP0 design improves personnel safety. Removable terminal connectors make installation and repair quick and easy. Wide operating temperature range allows for installation in most areas where standard control products can be installed today. igh current outrush capability allows use of smaller power supplies in many applications and ensures stable output during high power demand cycles. Due to long ride-through time, the Power Supply can maintain the control power system during brown out and black out conditions. Standards and ertifications UL Listed 0 SA ertified E Marked F ertified The IT. line of Power Supplies is specifically designed to work with the S0, S, MV0 and IT. electro-mechanical devices. They can also serve in a variety of other applications including support of sensors, operator interfaces, PLs, communication networks, heaters and lights and in many other industrial applications where V D power supplies are required. With the widest operating temperature range in the industry, rugged design and a long list of advanced features, they are able to be applied in a very wide range of applications. The higher input voltage ranges are designed to allow users to eliminate the need for a control power transformer in the enclosure or cabinet, thus saving space, wiring and money. A0000K
32 - Power Supply Intelligent Technologies (IT.) July 00 Technical Data and Specifications Table -. Power Supply Specifications PSS0E PSS0F PSSE PSSF PSSA PSSB PSS PSSD apacity 0W 0W W W W W W W Input Voltage 0 to 0V A 0 to 0V A 0 to 0V A 0 to 0V A V A 0V A 0 to 0V A -Phase 0 to 00V A -Phase Input urrent.a.a.a.a.a.a.0a/phase.0a/phase (RMS) Frequency z z z z z z z z Voltage Range ± 0% ± 0% ± 0% ± 0% ± % ± % ± 0% ± % Inrush urrent A A A A A A A A Overvoltage 0V A 0V A 0V A 0V A Varistor Varistor Varistor Varistor Internal Input Fuse 0V 0V 0V 0V 0V 0V x 0V x 00V External Fusing Not Required Output Voltage Nominal V D V D V D V D V D V D V D V D Voltage Regulation ±0% ±0% ±0% ±0% ±.% ±.% ±.% ±.% urrent Nominal.A.A.0A.0A.A.A.A.A Voltage Adj. Range None None None None None None None None urrent Surge A A.A.A 0A 0A 0A 0A urrent Surge 0 ms 0 ms ms ms 0 ms 0 ms 0 ms 0 ms Time Surge ycle Time 0 sec 0 sec 0 sec 0 sec old Up Time 00 ms 00 ms 00 ms 00 ms 0 ms 0 ms ms 0 ms Max. Load 0,000 µf 0,000 µf 0,000 µf 0,000 µf 0,000 µf 0,000 µf 0,000 µf 0,000 µf apacitance Switching 0k z 0k z 00k z 00k z 00k z 00k z 00k z k z Frequency Max. 0% % 0% 0% 0% 0% 0% % Load Output Ripple ±% ±% ±% ±% ±% ±% ±% ±% A0000K
33 July 00 Power Supply Intelligent Technologies (IT.) - Table -. Power Supply Specifications (ontinued) PSS0E PSS0F PSSE PSSF PSSA PSSB PSS PSSD apacity 0W 0W W W W W W W Protection Short ircuit Auto restart Auto restart Auto restart Auto restart Auto restart Auto restart Auto restart Auto restart Over Voltage No No No No No No No No Under Voltage No No No No No No No No Over None. Software in Micro ontroller Temperature Over urrent 0.A V for >00 ms.a V for >0 ms.a V for >0 ms.a V for >0 ms 0A V for >00 ms 0A V for >00 ms 0A V for >00 ms 0A V for >00 ms Galvanic Isolation Input to Output. kv kv. kv kv kv kv kv kv Input/Output to Rail. kv kv. kv kv kv kv kv kv Input to Ground. kv kv. kv kv. kv. kv. kv.0 kv Output to 00V 00V 00V 00V 00V 00V 00V 0V Ground Special Features ooling onvection onvection onvection onvection onvection onvection onvection onvection Load Sharing None None None None None None None None Redundancy None None None None None None None None Analog Outputs None None None None None None None None Fault Relay None None None None None None None None Wire Size Input 0 AWG 0 AWG 0 AWG 0 AWG 0 AWG 0 AWG 0 AWG 0 AWG Output 0 AWG 0 AWG 0 AWG 0 AWG 0 AWG 0 AWG 0 AWG 0 AWG I/O None None None None None None None None Indications Indicators Green LED (D on) Physical Data Dimensions Length x Width x Depth in inches (mm). x. x. ( x 0 x ). x. x. ( x 0 x ). x. x. ( x 0 x ). x. x. ( x 0 x ).0 x. x. ( x x ).0 x. x. ( x x ). x. x. ( x 0 x ). x. x ( x x ) Weight (kg). (.). (.). (.). (.).0 (.).0 (.). (.). (.) Mounting and Recommended learance TS Rail or hassis; Leave in. (0 cm) free space on venting sides. TS Rail (with optional PSSDIN Kit) or hassis; Leave in. (0 cm) free space on venting sides. Environmental Performance Storage - to 0 - to 0 - to 0 - to 0-0 to -0 to -0 to -0 to Temperature Operating - to 0 - to 0 - to 0 - to 0 - to 0 - to 0 - to 0 - to 0 Temperature Storage umidity to % to % to % to % to % to % to % to % Operating umidity <% R noncondensing <% R noncondensing <% R noncondensing <% R noncondensing 0 to % noncondensing 0 to % noncondensing 0 to % noncondensing 0 to % noncondensing Approvals/ertifications UL, IE, SA UL, IE, SA UL, IE, SA UL, IE, SA culus 0 Recognized, culus 0 Listed, E csaus A0000K
34 - Power Supply Intelligent Technologies (IT.) July 00 PSS0E PSS00E Table -. Power Supply Specifications (ontinued) PSS0E PSS0 PSS0D PSS00E PSS00 PSS00 PSS000 apacity 0W 0W 0W 00W 00W 00W 000W Input Voltage to 0V A 0 to 0V A -Phase Input urrent (RMS) 0-00Vac Ph to 0V A 0 to 0V A -Phase 0 to 0V A -Phase 0 to 0V A -Phase.A/.A 0.A/Phase 0./Phase.A/.A.A/Phase.A/Phase.A/Phase Frequency z z - z z z z z Voltage Range ± 0% ± 0% ± 0% ± 0% ± 0% ± 0% ± 0% Inrush urrent /A.A.A 0A 0A 0A 0A Overvoltage Varistor Varistor Varistor Varistor Varistor Varistor Varistor Internal Input Fuse 0V x 00V ()KTK-R-/, 00V 0V No No No External Fusing Not Required Not Required Not Required Not Required x 0V Required x 0V A Slow Blow A Slow Blow Output Voltage Nominal V D V D V D V D V D V D V D Voltage Regulation ±.% ±.% ±0. V ±% ±% ±% ±% urrent Nominal.A.A.A.A.A A 0A Voltage Adj. Range. to.v D. to.v D to V D to V D to V D to V D urrent Surge A 0A 0A A A 0A 0A urrent Surge Time sec sec sec sec sec sec sec Surge ycle Time 0 sec 0 sec 0 sec 0 sec 0 sec 0 sec 0 sec old Up Time 0 ms ms 0 ms 0 ms 0V A ms > ms Max. Load 0,000 µf 0,000 µf 0,000 µf 0,000 µf 0,000 µf 0,000 µf 0,000 µf apacitance Switching k z 00k z k z 00k z 00k z k z k z Frequency Max. % % % 0% % % 0% Load Output Ripple ±% ±% ±% ±.% ±.% ±.% ±.% A0000K
35 July 00 Power Supply Intelligent Technologies (IT.) - Table -. Power Supply Specifications (ontinued) PSS0E PSS0 PSS0D PSS00E PSS00 PSS00 PSS000 apacity 0W 0W 0W 00W 00W 00W 000W Protection Short ircuit Auto restart Auto restart Auto restart Auto restart Auto restart Auto restart Auto restart Over Voltage No Yes Yes Yes Yes Vout > 0V D Vout > 0.V D Under Voltage No Yes Yes Yes Yes Vout < 0V D Vout < 0V D Over Temperature None. Software in Micro ontroller Vout heatsink temp. is greater than 00 Over urrent A V for > sec A V for > sec A V for > sec 0A V for > sec 0A V for > sec.a V for > sec A V for > sec Galvanic Isolation Input to Output kv kv kv kv kv kv A kv A Input/Output to kv kv kv kv kv. kv A. kv A Rail Input to Ground. kv. kv KV. kv. kv. kv A. kv A Output to Ground 00V 00V 00V 00V 00V 00V A 00V A Special Features ooling onvection onvection onvection Fan cooled onvection Fan cooled Fan cooled Load Sharing Maximum units Maximum units Maximum units Maximum units Maximum units Maximum units Maximum units Redundancy Maximum units Maximum units Maximum units Maximum units Maximum units Maximum units Maximum units Analogue Outputs None None None VD Out = x V analogue, T = 0 x V analogue, IOUT = 0 x V analogue Fault Relay Form, V A and 0V A rating Form, V A and 0V A rating Form, Vac/ Vdc Form contacts 0V D or 0V A) None Form contacts 0V D or 0V A) VD OUT = x V analogue, T = 0 x V analogue, IOUT = 0 x V analogue Form contacts 0V D or 0V A) Form contacts 0V D or 0V A) Wire Size Input AWG AWG AWG AWG AWG AWG AWG Output AWG AWG AWG AWG AWG AWG AWG I/O AWG AWG AWG AWG (.0. mm) Indications Indicators Green LED (D on) Physical Data Dimensions Length x Width x Depth in Inches (mm).0 x. x. ( x x ). x. x (. x. x.). x. x. (.x x 0). x. x. (0 x x ) AWG (.0. mm). x. x. ( x 0 x ) AWG (.0. mm). x. x. ( x x ) AWG (.0. mm). x 0. x. ( x x ) Weight Lbs. (kg). (.). (.). (.). (.).0 (.). (). (.) Mounting and Recommended learance TS Rail with optional PSSDIN Kit or hassis (hardware included); leave in. (0 cm) free space on venting sides. TS Rail with optional PSSDIN Kit or hassis (hardware included); leave in. (0 cm) free space on venting sides. Environmental Performance Storage Temperature -0 to + -0 to + -0 to + -0 to + -0 to + -0 to + -0 to + Operating Temperature -0 to 0-0 to 0-0 to 0-0 to 0-0 to 0-0 to +0 (Full Power) -0 to +0 (Full Power) Storage umidity to % to % to % to % to % to % to % Operating umidity 0 to % noncondensing Approvals/ertifications E, culus 0 Listed 0 to % noncondensing E, culus 0 Listed 0 to % noncondensing to % noncondensing csaus E, culus 0 Listed to % noncondensing E, culus 0 Listed 0 to % noncondensing E, culus 0 Listed 0 to % noncondensing SA. #0-, culus 0 Listed, E A0000K
Industrial Control Power Transformers
Class MT Features Epoxy-encapsulated (50 5000); Completely seals the transformer coils against moisture, dust, dirt and industrial contaminants for maximum protection in hostile and industrial environments
More informationReducing sizes of control power transformers and power supplies with Eaton s XT IEC motor control
Application Paper AP000001E contents Description Page XT Starter with XTOB Thermal OL XT Manual Motor Controller Control power transformer selection.......... Power supply selection.....................
More informationPower Supplies 3. SDN-P DIN Rail Series
SDN-P DIN Rail Series The SDN DIN Rail power supplies provide industry leading performance. Sag Immunity, transient suppression and noise tolerant, the SDN series ensures compatibility in demanding applications.
More informationHPS Universal. Single and Three Phase Potted. Buck-Boost Transformers. Buck-Boost Applications & Standard Specification... 80
Buck-Boost Transformers Single and Three Phase Potted Buck-Boost Transformers Buck-Boost Applications & Standard Specification... 80 Selecting Buck-Boost Transformers... 81 Single Phase Selection Tables...
More informationSeries AMEPR30-AZ up to 2.5A AC-DC / DC-DC LED Driver / Converter
FEATURES: Click on Series name for product info on aimtec.com Models Single output Model Max Output Power (W) 1 AC-DC Constant Current or Constant Over temperature protection Voltage LED Driver Over current
More informationChrome DIN Rail Power Supply 24V 30W 1 Phase (Class II & NEC Class 2) / DRC-24V30W1AZ
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage without power de-rating Efficiency > 87.0% @ 115Vac & 230Vac NEC Class 2 / Limited
More informationCAT ATC POWER BREAKER & POWER CASE SWITCH AUTOMATIC TRANSFER SWITCH
CAT ATC POWER BREAKER & POWER CASE SWITCH AUTOMATIC TRANSFER SWITCH Cat transfer switches are designed for a variety of standby power applications. They provide flexibility, reliability and value in a
More informationBulletin 150 Smart Motor Controllers SMC-3 Smart Motor Controller
Overview/Modes of Operation Bulletin 150 Smart Motor Controller The SMC-3 is a compact, simple to use, solid-state motor controller designed to operate 3-phase motors. It features a built-in overload relay
More information1 pole, 16 A Screw terminal connection 35 mm rail (EN 60715) mounting. 2 pole, 8 A Screw terminal connection 35 mm rail (EN 60715) mounting
Series - Relay interface modules 8-10 - 16 A Features.01.02 1 & 2 pole relay interface modules, screw terminal socket, mm wide. Ideal interface for PL and electronic systems.01-1 Pole 16 A.02-2 Pole 8
More informationChrome DIN Rail Power Supply 24V 91.2W 1 Phase (Class II & NEC Class 2) / DRC-24V100W1AZ
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage without power de-rating Efficiency > 87.0% @ 115Vac, > 89.0% @ 230Vac NEC Class
More informationSTEP-PS/1AC/12DC/1.5. Extract from the online catalog. Order No.: 2868567. DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase
Extract from the online catalog STEP-PS/1AC/12DC/1.5 Order No.: 2868567 DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase Commercial data EAN 4046356292924 Pack 1 pcs. Customs tariff
More informationPRODUCT GUIDE. SL Medium Voltage IEC Vacuum Contactors
PRODUCT GUIDE SL Medium Voltage IEC Vacuum Contactors Table of Contents 1 Overview Introduction....................................................2 Features........................................................2
More informationYour Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592. * see variants. Applications.
Safety Technique SAFEMASTER Emergency Stop Module BG 5924, IP 5924 Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592 BG 5924 IP 5924 Product Description
More information1000W Single Output Power Supply 15V 24V. Protection type: Total Power limit, Latch-style (Recovery after reset AC power ON or inhibit)
000W Single Output Power Supply AK-000 series Features: Universal AC input / Full range Programmable output Voltage (0% ~ 05%) Programmable output Current (% ~ 05%) + / 0.5A auxiliary output U profile,
More informationSafety technique. Emergency stop module BO 5988 safemaster
Safety technique Emergency stop module BO 5988 safemaster 0221562 Function diagram Pushbutton on Mains or emergencystop () K1 According to EC Directive for machines 98/37/EG According to IEC/E 60204-1
More information33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application
33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3at Standard -40 to +60 C Temperature Range Diagnostic LEDs Full Protection
More informationPower Supply Unit, Primary Switched, Narrow Design MINI-PS-12-24DC/24DC/1
Power Supply Unit, Primary Switched, Narrow Design MINI POWER provides: Extra narrow design with widths of 22.5 mm, 45 mm, and 67.5 mm (0.886, 1.772, and 2.657 in.) Global use due to a wide-range input
More information650W Single Output Power Supply 15V 24V. 27V 48V Rated Current. 0 ~ 100A 0 ~ 50A 0 ~ 40A 0 ~ 27A 0 ~ 24A 0 ~ 13.6A Rated Power
Features: Universal AC input / Full range Programmable output Voltage (0% ~ 05%) Programmable output Current (% ~ 05%) + / 0.5A auxiliary output Forced current sharing at parallel operation Power OK signal
More informationCliQ DIN Rail Power Supply 24V 120W 1 Phase / DRP024V120W1AA
Highlights & Features Reliable design, with expected life of 10 years Compact, rugged design for ease of handling and installation Multiple connections to terminals allowed Designed for Class I Div. 2
More informationCompactLogix Power Supplies Specifications
Technical Data CompactLogix Power Supplies Specifications 1768 CompactLogix Power Supplies Catalog Numbers 1768-PA3, 1768-PB3 1769 Compact I/O Power Supplies Catalog Numbers 1769-PA2, 1769-PB2, 1769-PA4,
More informationMICROSENS. Central 48 V DC Power Supplies for PoE-Components. Description. Features
Central 48 V DC Power Supplies for PoE-Components MICROSENS Description Active network equipment which is supporting the Power-over-Ethernet functions, typically requires a powerful 48 V DC power supply.
More informationSECTION 26 09 26 LOW VOLTAGE LIGHTING CONTROLS
SECTION 26 09 26 LOW VOLTAGE LIGHTING CONTROLS PART 1 - GENERAL 1.01 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Division 1, "General Requirements", and Section
More informationOperating Manual UWAPS-TINY Series
Operating Manual UWAPS-TINY Series Powecon Oy WWW.POWECON.FI 1/9 Table of content 1 Warranty...3 2 Safety information...3 3 Abbreviations and terminology...3 4 List of appendices...4 5 Introduction...4
More informationThyristor-controlled power supplies and battery chargers
Thyristor-controlled power supplies and battery chargers Input voltage: 115 / 230 VAC, single phase, 50 / 60 Hz or 208 / 400 / 480 VAC, three phases, 50 / 60 Hz Output voltage: 12 / 24 / 48 / 60 / 72 /
More informationRedundancy Module QUINT-DIODE/40
Redundancy Module QUT DIODE provides: 00% decoupling of power supplies connected in parallel Can be installed in potentially explosive areas Load currents up to 60 A supported Easy assembly by snapping
More informationMTE SERIES RLW. World REACTORS USER MANUAL PART NO. INSTR 030 REL. 090930. 2009 MTE Corporation
MTE SERIES RLW World REACTORS USER MANUAL PART NO. INSTR 030 REL. 090930 2009 MTE Corporation IMPORTANT USER INFORMATION NOTICE MTE Series RLW reactors are components designed to improve the reliability
More informationElectronic overload relay EF19 and EF45
Data sheet Electronic overload relay EF19 and EF45 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays. Motor
More information12VDC MAGNETIC LED DIMMABLE POWER SUPPLIES SPEC SHEET DIGEST
12VDC MAGNETIC ED DIMMABE POER SUPPIES SPEC SEET DIGEST TM-30-DIM TM-50-DIM T-60-DIM TM100-DIM TM200-DIM TM300-DIM iring Diagram for TM-50-DIM and TM-100-DIM ED 12VDC MAGNETIC DIMMABE 30 POER SUPPY Smallest
More informationSeries 427. 1/16 DIN Multi-Mode Bar Graph Display Timer TIMERS PRODUCT HIGHLIGHTS
Series 427 1/16 DIN Multi-Mode Bar Graph Display Timer PRODUCT HIGHLIGHTS Digital Setting with 0.1% Accuracy Unique LED Bargraph Indicates Time Cycle in 20% Increments 8 Field Selectable Modes of Operation
More information12V Dimmable Driver EL-TMDRVR
Elemental LED, LLC website: elementalled.com 11 9 5 P a r k A v e., S u i t e 2 11 Emeryville, CA 94608 toll free 877.564.5051 fax 510.740.4457 12V Dimmable Driver EL-TMDRVR ETL Listed #4001928 CSA Listed
More informationVario-Series Accessories
Accessories and spare parts for GMW analogue panel meters and controllers Current Transformers pages 2-9 Shunt Resistors 10-11 Voltage Dividers 12 Power supply for indicator/controllers 13 Blanking Plates
More informationDistribution Dry Type Transformers
8 TRASFORMERS Distribution Dry Type Transformers Table (Contact Sales office for List Price) (commonly used) 1a. 115 C Rise F 1b. 80 C Rise B 4. Wall Brackets1 W 6. Low noise XdB below std. LX Type bg
More informationModel: DC-A2IO Advanced HVAC Controller
Model: DC-A2IO Advanced HVAC Controller Job Name: Schedule Reference: Date: DC-A2IO Advanced HVAC Controller Package PAC-IF01 M-Net Adapter AL2-14MR-D α2 Simple Application Controller Accessories AL2-2DA
More informationChrome DIN Rail Power Supply 12V 54W 1 Phase (Class II & NEC Class 2) / DRC-12V60W1AG
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage and full power up to 55 C Power will not de-rate for the entire input voltage range
More information40.3. Control Relays and Timers
.3 Contents EASY500/700/800 Intelligent Relays........ EASY/MFD Expansion Modules............ MFD Intelligent Relays................... EASY/MFD Communication Modules....... EASY/MFD Power Supplies, Accessories
More informationOutdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Features SELV Compliant No Detection Passive Injector Gigabit Compatible Full Protection
More informationAPC Matrix-UPS 5kVA 208V/240V In 120/208/240V Out
APC Matrix-UPS 5kVA 208V/240V In 120/208/240V Out APC Matrix-UPS, 3750 Watts / 5000 VA,Input 208V / Output 120V, 208V, Interface Port DB-9 RS-232, SmartSlot, Extended runtime model Includes: CD with software,
More informationPositive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of
More informationJNIOR. Overview. Get Connected. Get Results. JNIOR Model 310. JNIOR Model 312. JNIOR Model 314. JNIOR Model 410
The INTEG is an Ethernet I/O (digital, analog) device that monitors and controls a small set of process signals. functions as both basic I/O for integration with another application or system AND as a
More informationSTRATO LED Drivers 70W, Single output
Features STRATO switch mode driver technology is designed to generate one constant current output from a wide range AC input. The size and performance of these products make them the ideal choice for LED
More informationABB 1 NEW. Three-phase monitoring relay for grid feeding CM-UFS.1. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories
2CDC 251 014 F0t09 Features Monitoring of three-phase mains for grid feeding Type-tested in accordance with DIN V VDE V 0126-1-1: February 2006 Neutral conductor connection configurable Can also be used
More informationXPress-Pro SW Series Hardened Ethernet Switches Enabling Communication for the Demanding Industrial Environment
XPress-Pro SW Series Hardened Ethernet Switches Enabling Communication for the Demanding Industrial Environment Part of the device networking family of networkenablement products, XPress-Pro SW series
More informationPCB transformers. Short circuit proof PCB transformer VB. General Data. Advantages. Applications. Circuit diagram. Standards & 1 Certifications W v
Short circuit PCB transformer General Data Rated input 230 Vac Rated output 6-2 x 24 Vac Rated power 0.35-3.2 VA Insulation class B Maximum ambient temperature 70 C Efficiency up to 58 % Degree of protection
More informationPower Supplies 3. SDN-C Compact DIN Rail Series
Power Supplies 3 SDN-C Compact DIN Rail Series The SDN-C DIN rail power supplies are the next generation of the popular SDN series. These models combine high efficiency and compact size with new visual
More informationThermistor motor protection
Thermistor motor protection CM-E Range Thermistor motor protection Thermistor motor protection relays Benefits and advantages Selection table Operating principle and fields of application for thermistor
More information6 Buck Boost Transformers
6 uck oost Transformers uck-oost transformers are small, single phase, dry type distribution transformers designed and shipped as insulating/isolating transformers. They have a dual voltage primary and
More informationBussmann. All-In-One Module. Bussmann Power Module Switch. How to configure Part Numbers: Step 1: Select Switch Amperage 1
How to configure Part Numbers: Step : Select Switch Amperage Power Module Switch Rating (Amps) Power Module Switch Catalog No. 30 3 60 6 00 200 2 400 4 Step 2: Select Options Needed 5 Bussmann Power Module
More informationElectronic timer CT-VBS.17+18 OFF-delayed without auxiliary voltage, for DC contactors Data sheet
Characteristics Single-function OFF-delay timer for DC contactors, without auxiliary voltage Width.5 mm CDC 5 6 F3 Approvals A culus E CCC CT-VBS a Circuit diagram b Marker label Marks a CE b C-Tick Order
More informationExample of use: Fuse for a solenoid valve. If the fuse is defective, no information is sent to the electronic component.
Overview Switch and button modules The dimensions of the switch and button modules are adapted to the electronic components in the integral housing. The modules are equipped with the universal clip-on
More informationMini Circuit Breakers, Fuse Blocks, and Electronic Circuit Protection
Technical Data Mini Circuit Breakers, Fuse Blocks, and Electronic Circuit Protection Topic Page 1489-M Miniature Circuit Breakers 2 1492-SP Supplementary Protectors 15 1492-D Circuit Breakers 27 188 Regional
More informationPrimary and Secondary Electrical Distribution Systems
Primary and Secondary Electrical Distribution Systems Critical Facilities Round Table 12th Quarterly Membership Meeting June 2, 2006 David D. Roybal. P.E. Eaton Electrical Cutler-Hammer Products Utility
More informationNGC-30-CR -CRM -CRMS -CTM -CVM
NG-0-R -RM -RMS -TM -VM ontrol and monitoring modules for use with the Raychem NG-0 Installation Instructions Description The NG-0-RM/-RMS and NG-0-TM provide ground-fault and line current sensing, alarming,
More informationElectronic overload relay EF65, EF96 and EF146
Data sheet Electronic overload relay EF65, EF96 and EF146 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays.
More informationCURRENT TRANSFORMER MODEL 546 UL1015 #16 AWG LEAD WIRE, STANDARD LENGTH IS 24" 1 X
CURRENT TRANSFORMER MODEL 546 1.10" I.D. PAGE No 1-38 REV 15DEC00 TERMINAL OPTION LEAD WIRE OPTION 1.10 0 1.20 2.55 3.00 3.47 0.18 x 0.31 SLOT ( 2 PLACES) 8-32 BRASS STUD (2 PLACES) UL1015 #16 AWG LEAD
More informationBulletin 150 SMC Flex Smart Motor Controller Specifications
Specifications Specifications Standard Features Optional Features Installation Setup Communications Power Wiring Control Wiring Keypad Software Starting and Stopping Modes Protection and Diagnostics Metering
More informationDead Tank Circuit Breaker 72PM40-C Proven reliability through common platforms
Dead Tank Circuit Breaker 72PM40-C Proven reliability through common platforms ABB innovations for changing demands ABB (www.abb.com) is a leader in power and automation technologies that enables utility
More informationUMEC International Corporation
UP1301A SERIES 130 Watt Open Frame Switchers Small Size 3*5*1.2(inches) Universal Input to 264 VAC Low Power Consumption Overvoltage Protection Continuous Short Circuit Protection Over Temperature Protection
More information650W Single Output Power Supply
AK-650 series Features : Universal AC input with active PFC Programmable output Voltage ( 0% ~ 05% ) Programmable output Current ( % ~ 05% ) High efficiency up to 9% + / 0.5A auxiliary output Intelligent
More information48 SERIES Relay interface modules 10 A
48 Relay interface modules 10 A 1 CO relay interface modules, mm wide Ideal interface for PLC and electronic systems Type 48.P3 1 CO 10 A s Type 48.31 1 CO 10 A s AC coils or DC sensitive coils Supply
More informationRM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC
Characteristics multifunction control relay RM17-TE - range 183..528 V AC Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current [Us] rated supply voltage
More informationAnalog signal converters CC-E I/I Current / current isolators
ata sheet Analog signal converters CC-E I/I Current / current isolators The CC-E I/I is an isolator for the electrical isolation of current signals without auxiliary supply. It allows the isolation between
More informationBuck - Boost Transformers
Buck - Boost Transformers Contents Buck - Boost Transformers - Terms & Definitions... 48 Buck - Boost Transformers - Sizing... 50 Quick Reference Chart - 08, 0, 40 Volts Single & Three Phase... 5 Single
More informationUninterruptible Power Supply
96-01101 / rev. 2e / 2-2-12 Uninterruptible Power Supply EXCEPTIONAL SUPPORT & PROTECTION Uninterruptible Power Supply with Energy Saver design that is optimized to address the needs of A/V systems Features
More information2a. IEM Indoor Metal Clad Medium Voltage Switchgear 15KV 16346-1. 2a. Section 16346 INDOOR METAL CLAD MEDIUM VOLTAGE SWTICHGEAR (Std.
2a. IEM Indoor Metal Clad Medium Voltage Switchgear 15KV 16346-1 2a. Section 16346 INDOOR METAL CLAD MEDIUM VOLTAGE SWTICHGEAR (Std. Relays) Part 1 General 1.1 CONDITIONS AND REQUIREMENTS: A. Refer to
More information49 Series - Relay interface modules 8-10 - 16 A. Features
Features 1 & 2 Pole relay interface modules 5 µm Gold plate contacts for low level switching capability 49.31-50x0-1 Pole 10 A (screw terminal) 49.52-50x0-2 Pole 8 A (screw terminal) 49.72-50x0-2 Pole
More informationYour automation should be permanently supplied Our compact PROeco power supplies offer that as part of an economical concept Let s connect.
Your automation should be permanently supplied Our compact PROeco power supplies offer that as part of an economical concept Let s connect. Power supply Find the cost-effective solution for your power
More informationDC DC CONVERTER 1000W 100-400VDC Input / 12VDC Output
DC DC CONVERTER 1000W 100-400VDC Input / 12VDC Output Code prod. : 30x57090.00 Feb, 11 th 2005 MES DEA s.a. - Service - Copying of this document and giving it to others and the use or communication of
More informationDimensions, Inches (mm) No. of Poles Width Height Depth 2, 3 8.25 (210) 16 (407) 5.5 (140) 4 11.125 (283) 16 (407) 5.5 (140)
9-10N Supersedes Selection Data 9-10N, pages, 1-, dated dated March March 1995 1995 Mailed to: E, D, C/9-100A, 31-A, INTERRUPTING CAPACITY RATINGS IEC 947- Interrupting Capacity s➀ Interrupting Capacity
More informationPanel Meters and Controllers Modular Panel Meter Type EDM 35
Panel Meters and Controllers Modular Panel Meter Type EDM 35 Modular digital panel meter, 3 1/2-digit Indicating or controlling current, voltage, resistance, temperature, tacho or frequency. Easy programming
More informationSoft Starter. Product Description. Ordering Code. Type Selection. Selection Guide RSG D 40 16 E 0 VD00
Soft Starter Three Phase General Purpose Soft Starters Type RSGD Soft starting and soft-stopping of 3-phase squirrel cage motors 45mm wide IP20 housing Operational Voltage: RSGD40 (220-400V), RSGD60 (220-600V)
More informationACS-CRM CONTROL AND MONITORING MODULES FOR USE WITH THE RAYCHEM ACS-30 SYSTEM INSTALLATION INSTRUCTIONS
AS-RM ONTROL AND MONITORING MODULES FOR USE WITH THE RAYHEM AS-0 SYSTEM INSTALLATION INSTRUTIONS APPROVALS/ERTIFIATIONS Hazardous Locations lass I, Div., Groups A,B,,D Ex n II T5 lass I, Zone, AEx n II
More informationTEP 200WIR Series, 180 240 Watt
TEP 200WIR Series, 180 240 Watt Features Chassis mount with screw terminal block Including EMI filter to meet EN 55022, class A Ultra wide 4:1 input voltage ranges 8.5 36, 16.5 75, 43 160 VDC EN 50155
More informationPD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description
Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.
More informationE2 Series Electric Furnaces
E2 Series Electric Furnaces Service Manual Table of Contents Electrical Requirements... 10 Codes, Specifications Requirements... 10 Connection Supply Service Wires... 10 Furnace Sequence of Operation...
More informationMLC 9000+ TM Maximum Productivity and Versatility for Control without Compromise!
Data Sheet Maximum Productivity and Versatility for Control without Compromise! Basic Bus Communication Module DESCRIPTION The Basic Bus Communication Module (BCM) is part of the MLC 9000+ DIN rail mount
More informationBT300 HVAC Drives Conventional Bypass (C-Bypass) Options
BT300 HVAC Drives Conventional Bypass (C-Bypass) Options Description The BT300 Conventional Bypass is a companion package for the family of BT300 HVAC Drives. For information on the family of BT300 HVAC
More informationHow To Build A Low Voltage Capacitor Lvcp
Low Voltage Capacitor LVCP The new choice for Power Factor Correction LVCP : the new choice for Power Factor Correction The LVCP is a compact and powerful capacitor. It offers high modularity, unmatched
More informationBRITISH STYLE SEMICONDUCTOR PROTECTION FUSES
The Edison British Style semiconductor protection fuses include a 660VAC line utilizing new filler technology. These new fuses have greatly reduced peak let-through current and energy under fault conditions
More informationContents. Clean Control Center Harmonic Correction Unit. Selection Dimensions Specifications. Description
lean ontrol enter Harmonic orrection Unit Technical Data Selection Dimensions Specifications ontents Description Page lean ontrol enter Specifications Harmonic orrection Unit...... 2 Sizing and Selection...........................................
More information48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0.
48 Series - Relay interface modules 8 A Features 48.12 2 Pole Safety relay interface modules, 15.8 mm wide 48.12-2 Pole 8 A (screw terminal) DC sensitive coils Relay with forcibly guided contacts according
More informationVoltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
More informationSecondary Unit Substations
14 SWITCHGEAR Secondary Unit Substations Overview Siemens offers a wide variety of unit substation designs to meet customer requirements. A unit substation consists of one or more transformers mechanically
More informationProcess modules Digital input PMI for 24 V DC inputs for 120 V AC inputs
E031026 000823 Process modules Digital input PMI for inputs for 120 V AC inputs PMI Input E4, E5, GND L- PMI 120 V AC Input E4, E5, Common C E6, E7, GND L- E6, E7, Common C LEDs for the inputs operation
More informationElectronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact The CT-AHD.12 is an electronic time relay with OFF-delay. It is from the CT-D range. With their MDRC profile and a width of only
More informationOVR Three-Phase Recloser and PCD Control Style Guide 1VAL264001-SG October 13, 2009 Revision F
OVR Three-Phase Recloser and PCD Control Style Guide 1VAL264001-SG October 13, 2009 Revision F The OVR three-phase recloser style guide aids in the proper selection of your OVR three-phase style number.
More informationTmax MCCBs. Molded case circuit breakers. Tmax
Molded case circuit breakers Introduction ABB is once again demonstrating its commitment to new product development and its superiority in product performance. Never before has the industry seen such high
More informationVoltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
More informationAMFA-27 AMFA-29. Operator s Manual & Installation Instructions. Rev. 2.5
AMFA-27 AMFA-29 Operator s Manual & Installation Instructions Rev. 2.5 Date: 17 July, 2010 Permanently-connected, utility Interactive, single-phase, inverters Model AMFA-27 WIND TURBINE INVERTER (240 VAC
More informationElectronic, Digital and Mechanical Vibration Switches
PT500 Electro-Mechanical Vibration Switch Introduction The PT500 is an economical solution that provides basic vibration protection for rotating reciprocating machines. The PT500 uses an inertia sensitive
More information38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 SERIES Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical
More informationSingle Phase Three Phase Single Phase Export Model Transformers Single Phase Buck and Boost Transformers Stainless Steel Enclosed Transformers
Transformers Selection Guide Description Page Three Phase Single Phase Aluminum, Copper, 150 Degree Rise Aluminum, Copper, 115 Degree Rise Aluminum, Copper, 80 Degree Rise Epoxy Encapsulated Aluminum,
More informationThree-phase monitoring relay CM-PFE
Data sheet Three-phase monitoring relay CM-PFE The CM-PFE is a three-phase monitoring relay that monitors the phase parameter phase sequence and phase failure in three-phase mains. 2CDC 251 005 S0012 Characteristics
More informationCATHODIC PROTECTION TRANSFORMER RECTIFIER (CPTR)
CATHODIC PROTECTION TRANSFORMER RECTIFIER (CPTR) Fig1. CPTR SMART CONTROL PRECISION CUSTOMIZED MANUAL OR AUTO SCR OR DIODE DRY TYPE SWITCH MODE DRY TYPE SCR OR DIODE OIL TYPE 1 INDEX PAGE 1. Cover 2. Index
More informationIndustrial Control Transformers
Industrial Control Transformers Sizing...158 Selection Chart...159 SBE 55 C ise, Copper, Encapsulated, 50 VA - 1000 VA... 161 5 SBE Accessories... 165 SBE 55 C ise, Copper Open Style, 1500 VA - 5000 VA...
More informationQuick Connect. quick - simple - efficient. www.g-mw.de
Quick Connect quick - simple - efficient www.g-mw.de Phone: +49 9103 7129-0 Fax: +49 9103 7129-207 Innovative connection technology to plug three single-phase current transformers to multifunctional power
More informationCliQ DIN Rail Power Supply 24V 120W 1 Phase / DRP024V120W1AA
Highlights & Features Universal AC input voltage Power will not de-rate for the entire input voltage range Power Boost of 150% for 3 seconds Full corrosion resistant aluminium chassis SEMI F47 certified
More informationThe HVAC SOLUTION DELIVERING POWER...SAVING ENERGY
The HVAC SOLUTION DELIVERING POWER...SAVING ENERGY PowerGate - Cost effective solutions for F 1 Horsepower Rating 001 1-40 HP (208V) 075 1-75 HP (480V) Input Voltage 2V 208-240V 4V 380-480V Disconnect
More informationCircuit Breakers. NRC Series. NRC Series. 900 www.idec.com
Switches & Pilot Lights Display Lights NRC series circuit breakers offer circuit protection which is far superior to using fuses in applications containing relay circuits, motor circuits, heater circuits,
More informationDEK-REL- 24/1/SEN. Extract from the online catalog. Order No.: 2964050
Extract from the online catalog DEK-REL- 24/1/SEN Order No.: 2964050 Relay terminal block for sensor, with soldered-in miniature relays, contact (AgNi+Au): small to medium loads, 1 N/O contact, input voltage
More informationType: EASY719 DC RC Article No.: 274119. Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC. Description
Type: EASY719 DC RC Article.: 274119 Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC Description 12 digital inputs (4 inputs available as analog inputs) 6 relay outputs LCD display
More information