APPROVAL SHEET MANUFACTURE SIGNATURE CUSTOMER SIGNATURE DATE: 09/03/09 DATE: 09/03/09 DATE: 09/03/09 DATE:

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "APPROVAL SHEET MANUFACTURE SIGNATURE CUSTOMER SIGNATURE DATE: 09/03/09 DATE: 09/03/09 DATE: 09/03/09 DATE:"

Transcription

1 APPROVAL SHEET CUSTOMER: PART NAME: Mini PCI Express Connector PART NO.: CUSTOMER P/N: MANUFACTURE SIGNATURE SALES REP. R&D DEPT. QA DEPT. CUSTOMER SIGNATURE Jeff 万军 Sally liu DATE: 09/0/09 DATE: 09/0/09 DATE: 09/0/09 DATE: ECONN ELECTRO INDUSTRY CORP SHENZHEN: HONGKONG: 91,92 Building,Fifth Industrial, Flat9,10/F,Wah shing Ind.Center11 MaShan Tou Village Gong Ming Town, Shing Yip St.,KwunTong Kin,H.K Shen Zhen City,Guangdong Province Tel: Fax: Page 1

2 RELEASE DATE: 09/0/09 REVISION: 1.0 ECN No: EC PAGE: 2 OF 8 1 REVISION HISTORY 2 SCOPE 4 APPLICABLE DOCUMENTS 4 4 REQUIREMENTS 4 5 PERFORMANCE 5 6 INFRARED REFLOW CONDITION 7 7 PRODUCT QUALIFICATION AND TEST SEQUENCE 8 Page 2

3 RELEASE DATE: 09/0/09 REVISION: 1.0 ECN No: EC PAGE: OF 8 1 Revision History Rev. ECN # Revision Description Approved Date 1 EC NEW Match Page

4 RELEASE DATE: 09/02/09 REVISION: 1.0 ECN No: EC PAGE: 4 OF 8 2 SCOPE This specification covers performance, tests and quality requirements for Mini PCI Express Connector APPLICABLE DOCUMENTS MIL-STD-202 Mini PCI Express Card Electromechanical Specification Revision 1.0 EIA-64 4 REQUIREMENTS 4.1 Design and Construction Product shall be of design, construction and physical dimensions specified on applicable product drawing. 4.2 Materials and Finish Contact: High performance copper alloy Housing: Thermoplastic, high temp. UL94V Solder Peg: Copper Alloy, Tin Plated over Ni plate. 4. Ratings 4..1 Voltage: 50 Volts AC 4..2 Current: 0.7Amperes 4.. Operating Temperature : -25 to +85 Page 4

5 RELEASE DATE: 09/0/09 REVISION: 1.0 ECN No: EC PAGE: 5 OF 8 5 Performance 5.1. Test Requirements and Procedures Summary Item Requirement Standard Examination of Product Meets requirements of product drawing ELECTRICAL Visual inspection No physical damage Low-signal Level Contact Resistance 55 mω Max. (Initial) ΔR=20 mω Max. (Final) Subject mated contacts assembled in housing to closed circuit current of 10 ma Max. at open circuit voltage of 20mV Max. obtain resistance value by dividing the measured reading into two. Fig. -1. EIA-64-2 Insulation Resistance 500MΩ Min.(Initial) 500MΩ Min.(Final) Impressed voltage 500 V DC. Test between adjacent circuits of unmated connectors. EIA Dielectric Withstanding Voltage No creeping discharge nor flashover shall occur. Current leakage : 0.5 ma Max. 0. kvac for 1 minute. Test between adjacent circuits of unmated connectors. EIA MECHANICAL Vibration (Low Frequency) No electrical discontinuity greater than 1µsec. shall occur. R=20 mω Max. (Final) Subject mated connectors Vibration Frequency: 10 to 55 Hz Accelerated Velocity: 0.8m/s2 (.1G), rms. Vibration Direction: In each of mutually perpendicular planes. Duration: 15 minutes each 100 ma applied. Module board should be fixed on the connector mount board or test jig. EIA Method Ⅶ condition D Physical Shock No electrical discontinuity greater than 1µsec. shall occur. Accelerated Velocity: 490 m/s 2 (50 G) Waveform: Half sine Duration: 11 m sec. Number of Drops: drops each to normal and reversed directions of X, Y and Z axes, totally 18 drops. EIA Condition A Module Board Mating Force 22.5N (2.kgf) Max. Operation Speed: 100 mm/min. Measure the force required to mate connectors (In this test, the force required to turn PCB before it engages on lacking, is excluded). EIA-64-1 Durability (Repeated Mating/Unmating) Repeated insertion and extraction of P.C.B to and from the connector with the turns to lock it and then unlock it for 50 cycles. EIA-64-9 Page 5

6 RELEASE DATE: 09/0/09 REVISION: 1.0 ECN No:EC PAGE: 6 OF8 Item Requirement Standard ENVIRONMENTAL Thermal Shock Mated connector -55 C / 0 min., 85 C / 0 min. Making this a cycle, repeat 10 cycles. EIA-64-2, Condition A Humidity-Temperature Cycling Insulation resistance 500MΩ Max.(final) Mated connector, 25~65 C, 50~80 % R. H. 24 cycles Cold shock -10 C performed Thermal Cycling Mated connector, 15±~85± Ramps: 2 /min. Dwell time: 5min. Min. 10 Cycle Salt Spray Industrial Gas (SO2) Subject mated connectors to 5 % salt concentration for 24 hours : Mated connector SO2 Gas : 10 ppm, 95 % R. H. 25 C, 24 hours Solderability Wet Solder Coverage : 95 % Min. Solder Temperature : 245 ± 5 C Immersion Duration : 5 ± 0.5 seconds Flux : Alpha 100 Resistance to Reflow Soldering Heat No physical damage shall occur Test connector on P.C.Board Temperature is measured on a soldering pad. Fig. Pre-Heat150~180 : 90sec.Max. Heat 220 Min.: 0~40sec. Heat Peak 255±5 Max Temperature Life (Heat Aging) Mated connector 115 C, Duration: 240 hours EIA-64-17, Method A Temperature Life (Preconditioning) No physical damage Mated connector 115 C, Duration: 96 hours EIA-64-17, Method A Page 6

7 T RELEASE DATE: 09/0/09 REVISION:1.0 ECN No: EC PAGE: 7 OF 8 6 INFRARED REFLOW CONDITION 6.1. General Process : DURATION = 2 TIMES temp ( ) TEMPERATURE CONDITION GRAPH TEMPERATURE ON BOARD PATTERN SIDE Peak temp 20 MAX.(sec.Min) 180 Min 0 sec. Min Slope < /Sec 200 Min Pre-heat Hold time for 150 Max. is 60 sec Lead-free Process : DURATION = 2 TIMES temp ( ) TEMPERATURE CONDITION GRAPH TEMPERATURE ON BOARD PATTERN SIDE Peak temp 260+0/-5 MAX.(10sec.Max) 200 Min 40 sec. Min Slope < /Sec 20 Min Pre-heat Hold time for 150~180 Max. is 60~120 sec. Page 7

8 RELEASE DATE: 09/0/09 REVISION: 1.0 ECN No: EC PAGE:8 OF 8 6 PRODUCT QUALIFICATION AND TEST SEQUENCE Test or Examination Examination Temperature Resistance Dielectric Withstand Voltage Insulation Resistance Vibration Physical Shock Module Board Mating Force Durability Thermal Shock Temperature Humidity Cycling Thermal Cycling Salt Spray Industrial Gas (SO2) Solderability Resistance to Reflow Soldering Heat Temperature Life (Heat Aging) Temperature Life (Preconditioning) Test Group Test Sequence Page 8

9

10

11

Design Objective. USB Type-C Connector. 15-Otc-2015 Rev 3

Design Objective. USB Type-C Connector. 15-Otc-2015 Rev 3 15-Otc-2015 Rev 3 USB Type-C Connector 1 Scope : 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions of TE Connectivity USB type

More information

Product Specification Micro-SIM H1.24 Push-Pull Type 108. This specification covers the requirements for product performance, test methods and quality

Product Specification Micro-SIM H1.24 Push-Pull Type 108. This specification covers the requirements for product performance, test methods and quality Product Specification Micro-SIM H1.24 Push-Pull Type 108 09. Jan 13 1. Scope : 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions

More information

Mar11 Rev C

Mar11 Rev C Product Specification 2 mm AMP-LATCH* Ribbon Cable Receptacle Connector 108-1372 11Mar11 Rev C 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for AMP-LATCH*

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION ipass TM / ipass+ TM 0.8 mm PITCH I/O CONNECTOR SYSTEM EXTERNAL ipass / ipass+ of TABLE OF CONTENTS.0 SCOPE... 3.0 PRODUCT DESCRIPTION... 3. PRODUCT NAME AND SERIES NUMBER(S)... 3. DIMENSION, MATERIALS,

More information

Two Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts

Two Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts Product Specification 108-19346 17 APR 2013 Rev F Two Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts 1. SCOPE 1.1. Content NOTE The product may not perform according

More information

I-PEX MHF4 Micro Coaxial Connector

I-PEX MHF4 Micro Coaxial Connector PRODUCT SPECIFICATION I-PEX MHF4 Micro Coaxial Connector Plug P/N 20448-001R-81 Receptacle P/N 20449-001E RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw Tel: +886-2-24239376

More information

Product shall be of the design, construction and physical dimensions specified on the applicable product drawing.

Product shall be of the design, construction and physical dimensions specified on the applicable product drawing. Product Specification 108-1403 07Nov08 Rev A All Paragraphs Revised AMPOWER* Wave Crimp System Self-Aligning Header and Receptacle Assemblies 1. SCOPE 1.1. Content This specification covers performance,

More information

Subminiature, LAN Modular Jack Connectors

Subminiature, LAN Modular Jack Connectors Subminiature, LAN Modular Jack Connectors TMR-5M Series Features.Fast Ethernet Support Conforms to the TIA/EIA-568-A data wiring standard and meets requirements of CAT5 transmission performance for,-3,6

More information

Modular Jack With LED, Magnetics CONNECTOR

Modular Jack With LED, Magnetics CONNECTOR Modular Jack With LED, Magnetics CONNECTOR (MOLEX P/N: 48025-1091) CONNECTOR 1 of 7 1.0 PURPOSE: This test is provided you the result of evaluation of Modular Jack With LED Magnetics connector 48025-1091

More information

Modular Plug Connectors compliant to Cat.6 A Standard

Modular Plug Connectors compliant to Cat.6 A Standard Modular Plug Connectors compliant to Cat.6 A Standard TM3P Series Features. Support High-Speed LAN transmission Improved performance by two row contact arrangement. Conforms to Cat.6 A requirements of

More information

PRODUCTS SPECIFICATION

PRODUCTS SPECIFICATION PRODUCTS SPECIFICATION ************************************************************************************** Description : DVI Connector Customer : COMOSS P/N : DV Series Date of Issue : 20-Sep-2002 Version

More information

SD Memory Card Connectors

SD Memory Card Connectors SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion

More information

Operating Temperature Range: -30 to +85ç (Note 1) Operating Humidity Range: 40 to 80%

Operating Temperature Range: -30 to +85ç (Note 1) Operating Humidity Range: 40 to 80% All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.

More information

Product Specification

Product Specification Product Specification Model No.: DC-240-L01-00-TR Description: H=3.00mm Horizontal SMD DC Power Jacks Pin Shaft Diameter: 0.65mm Packing Method: Tape & Reel (600pcs./R) 1. General 1a. Scope The jacks should

More information

AMP CO Plus Insert for Cat. 6 A Applications

AMP CO Plus Insert for Cat. 6 A Applications Product Specification 108-93039 10/Mar/2011 Rev F AMP CO Plus Insert for Cat. 6 A Applications 1. SCOPE 1.1 Content This specification covers performance, tests and quality requirements for AMP* CO Plus

More information

Interface Connectors for CDMA Type Cellular Phones

Interface Connectors for CDMA Type Cellular Phones Interface Connectors for CDM Type Cellular Phones MQ/SF178 Series Two interface configurations 1X Key 1X EV-DO Key Signal contacts Coaxial connector Features 1. Complies with the requirements of NC-R1-18

More information

X7R Dielectric Non-Magnetic Multilayer Ceramic Capacitors

X7R Dielectric Non-Magnetic Multilayer Ceramic Capacitors X7R Dielectric Non-Magnetic Multilayer Ceramic Capacitors Product Features Non-Magnetism, Suitable for MRI Part Numbering C 0603 X 222 K 500 P T 1 2 3 4 5 6 7 8 Chip Capacitor Chip Capacitor Dimensions

More information

Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

Lightweight SMT Miniature Coaxial Connectors 1.4 mm Mated Height

Lightweight SMT Miniature Coaxial Connectors 1.4 mm Mated Height Lightweight SMT Miniature Coaxial Connectors 1.4 mm Mated Height N.FL Series Mated height comparison (With U.FL-LP(V) ) Features 1. Low profile Nominal mated height is 1.4 mm (Max. 1.5 mm) 2. Small size:

More information

Interface RF Connector with Switch

Interface RF Connector with Switch NEW Interface RF onnector with Switch Series Overview Designed for end user applications requiring redirection of transmission from internal built-in antenna to the external antenna. Small size, lightweight

More information

MAXIMUM SOLUTIONS. Mill-Max Offers New SuperSpeed USB 3.0 Connectors

MAXIMUM SOLUTIONS. Mill-Max Offers New SuperSpeed USB 3.0 Connectors MAXIMUM SOLUTIONS Mill-Max Offers New SuperSpeed USB 3.0 Connectors Mill-Max has expanded its USB family to include four new USB 3.0 connectors. USB 3.0, SuperSpeed USB, provides a 10 X faster data transfer

More information

HMCC SERIES. With SMT PCB Mating Jacks. Electronics LLC. Features: Applications: Low Profile Mated Height: (2.4mm) High Frequency Performance to 6 GHz

HMCC SERIES. With SMT PCB Mating Jacks. Electronics LLC. Features: Applications: Low Profile Mated Height: (2.4mm) High Frequency Performance to 6 GHz HMCC SERIES Features: Low Profile Mated Height: (2.4mm) Ultra small PCB profile and surface area High Frequency Performance to 6 GHz Highly Shielded, Ultra-fine Coaxial Cable Three different sizes available

More information

帝 聞 企 業 股 份 有 限 公 司 DEE VAN ENTERPRISE CO., LTD. SP-235864 DSL-20WA 420024 1 Revision: A Date: 2011.10.24 FOR AC-DC LED DRIVER MODEL NO.

帝 聞 企 業 股 份 有 限 公 司 DEE VAN ENTERPRISE CO., LTD. SP-235864 DSL-20WA 420024 1 Revision: A Date: 2011.10.24 FOR AC-DC LED DRIVER MODEL NO. CUSTOMER: PART NUMBER: A200 APPROVAL SHEET FOR AC-DC LED DRIVER MODEL NO. DSL-20WA 420024 1 ORDER NO: SP-235864 承 認 書 确 認 后 請 簽 回 一 份 CUSTOMER APPROVED SIGNATURE DEE VAN ENTERPRISE CO., LTD (Head-Quarter)

More information

Compliant Terminal Technology Summary Test Report

Compliant Terminal Technology Summary Test Report Engineering Report ER04100 October 5th, 2004 Revision A Copyright Autosplice Inc., September 2004 Table of Contents Summary Overview 3 Compliant Terminal Specifications 3 Test Plan 4 Test Conditions 4

More information

3. ELECTRICAL PERFORMANCE PROPERTY TEST CONDITION PERFORMANCE 3. 1 Contact Resistance 1) Center Push 100mΩ Max

3. ELECTRICAL PERFORMANCE PROPERTY TEST CONDITION PERFORMANCE 3. 1 Contact Resistance 1) Center Push 100mΩ Max 1. GENERAL 1. 1 Application : This specification is applied to MULTI WAY SWITCH for electronic equipment. 1. 2 Operating Temperature Range :-25 ~ 70 1. 3 Storage Temperature Range :-0 ~ 85. However, 96

More information

Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height

Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.

More information

DATA SHEET. SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R. Product Specification February 27, 2013 V.

DATA SHEET. SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R. Product Specification February 27, 2013 V. Product Specification February 27, 13 V.9 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free

More information

Wireless Applications. Host Interfaces. te.com/products/ngff. TE Connectivity. M.2 (NGFF) Connector. Ultrabook/ Notebook. Smart TV. Server.

Wireless Applications. Host Interfaces. te.com/products/ngff. TE Connectivity. M.2 (NGFF) Connector. Ultrabook/ Notebook. Smart TV. Server. M2 NGFF Applications ULTRABOOK TABLET SSD SMART TV The list goes on and on... Miniature in size. Big in possibilities. 0.5MM PITCH WITH 67 POSITIONS & AVAILABLE IN VARIOUS HEIGHTS SAVES MORE THAN 20% PCB

More information

.093 [2.36] Commercial Pin and Socket Connectors

.093 [2.36] Commercial Pin and Socket Connectors Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel mounting

More information

0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors.

0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors. 0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors. FH Series (51pos. type) 3.45mm 17.1mm 0.9mm Features 1. Extremely light weight The largest version, with all contacts

More information

WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402

WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402 WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 10 ASC_WR_V23 APR.- 2015

More information

Surface Mount Fuses 6125Size> Fast Acting > S6125-F-15.0A

Surface Mount Fuses 6125Size> Fast Acting > S6125-F-15.0A Page: 1 of 6 General Fast acting,inrush withstand capability Wire-In-Air performance Wide range of current rating available 6.1mm 2.5mm square shape surface mount Higher temperature profiles -55 ~125 operating

More information

PCI EXPRESS CARD EDGE G630E Series

PCI EXPRESS CARD EDGE G630E Series GENERAL INTRODUCTION The PCI Express is a new serial I/O technology that is compatible with the current PCI software environment. It provides low-cost, scalable performance for the next generation of computing

More information

SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) Rotor. Wiper. Cover. Pin S T - 2 T A 1 0 0 Ω ( 1 0 1 )

SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) Rotor. Wiper. Cover. Pin S T - 2 T A 1 0 0 Ω ( 1 0 1 ) SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) COPAL ELECTRONICS RoHS compliant INTERNAL STRUCTURE 8 4 7! 5! 9 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7

More information

SINGLE TURN CERMET TRIMMERS

SINGLE TURN CERMET TRIMMERS SINGLE TURN INTERNAL STRUCTURE 4 5 6!0 8 FEATURES Economy model suitable for general applications High voltage and current ratings Suitable for automatic insertion and automatic adjustment O ring sealed

More information

Gas Discharge Tube (GDT) Products CG5 and SL0902A Series. CG5 and SL0902A Series

Gas Discharge Tube (GDT) Products CG5 and SL0902A Series. CG5 and SL0902A Series Description Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Littelfuse Broadband Optimized SL0902A Series offers high surge ratings in a miniature package. Special design

More information

ST-2 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) FEATURES PART NUMBER DESIGNATION S T - 2 T A 1 0 0 Ω ( 1 0 1 ) RoHS compliant

ST-2 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) FEATURES PART NUMBER DESIGNATION S T - 2 T A 1 0 0 Ω ( 1 0 1 ) RoHS compliant SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) ST- RoHS compliant INTERNAL STRUCTURE 8 4 7 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7 8 9!! 5 Part name Housing

More information

Connection Systems. High Density Printed Circuit (HDPC) Connectors

Connection Systems. High Density Printed Circuit (HDPC) Connectors Connection Systems High Density Printed Circuit (HDPC) Connectors Connection Systems High Density HDPC Connectors Get connected with our expanding family of high quality connectors Delphi Connection Systems

More information

ISA-PLAN // Precision resistors. SMT // Size Features

ISA-PLAN // Precision resistors. SMT // Size Features Features 5 W power rating at 05 C Constant current up to 35 A (4 mohm) excellent long-term stability High pulse power rating Mounting: Reflow-, and IR-soldering AEC-Q200 qualified rohs 20/65/EU compliant

More information

Automotive and Anti-Sulfuration Chip Resistor 0402

Automotive and Anti-Sulfuration Chip Resistor 0402 The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the

More information

High-ohmic/high-voltage resistors

High-ohmic/high-voltage resistors FEATURES High pulse loading capability Small size. APPLICATIONS Where high resistance, high stability and high reliability at high voltage are required High humidity environment White goods Power supplies.

More information

DISCONTINUED (1998) FBR46 SERIES. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES

DISCONTINUED (1998) FBR46 SERIES. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES RoHS compliant FEATURES Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment.

More information

0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors 0.mm pitch, 0.mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors FH1C & FH1SC Series Actuator color: Brown FH1SC FPC/FFC thickness: 0.±0.0mm Actuator color: Black Features

More information

DATA SHEET THIN FILM CHIP RESISTORS High precision - high stability RT series 0.05% TO 1%, TC 10 TO 50 sizes 0402/0603/0805/1206/ 1210/2010/2512

DATA SHEET THIN FILM CHIP RESISTORS High precision - high stability RT series 0.05% TO 1%, TC 10 TO 50 sizes 0402/0603/0805/1206/ 1210/2010/2512 DATA SHEET THIN FILM CHIP RESISTORS High precision - high stability series 0.05% TO 1%, TC TO 50 sizes 0402/0603/0805/1206/ 12/20/2512 RoHS compliant Product specification Product specification 2 SCOPE

More information

0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors

0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors 0.mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors FH26 Series Space saving(51 pos. shown) 1.0mm.2mm.8mm Metal fittings do no protrude outside of the connector body Features

More information

Universal MATE-N-LOK Connectors

Universal MATE-N-LOK Connectors Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification completely enclosed in housings Positive locking housings Insulation capability to.00

More information

CTC Series. Environmentally sealed Cable to Cable interconnects

CTC Series. Environmentally sealed Cable to Cable interconnects CTC Series Environmentally sealed Cable to Cable interconnects Cable to Cable interconnects for the harshest environments The CTC Series was designed as a high-performance, cost-effective solution for

More information

HSD High Speed Data interconnection

HSD High Speed Data interconnection HSD High Speed Data interconnection Fast, safe and robust Very high data bit rate up to 5 Gbit/s SSR smart strain relief enables unstressed solder joints Excellent resistance against cross-talk and RF-EMC

More information

N type Coaxial Connectors

N type Coaxial Connectors N type Coaxial Connectors N Series Features 1. 50 ohms wide varieties standard connectors 2. Screw on locking 3. High durability 4. Applicable standard: MI-C-39012/MI STD 348-304 Products guide s Straight

More information

SC-1000/2000 ROTARY CODED SWITCHES FEATURES PART NUMBER DESIGNATION S C - 1 0 1 0 T B. RoHS compliant

SC-1000/2000 ROTARY CODED SWITCHES FEATURES PART NUMBER DESIGNATION S C - 1 0 1 0 T B. RoHS compliant SC-00/2000 RoHS compliant INTERNAL STRUCTURE SC-00 / 2000 series 4 2 3 6 FEATURES BC RoHS compliant Fine click with metallic spring Low profile of 3.9 mm makes perfect for high density board mounting applications

More information

1 POLE - 5A SLIM POWER RELAY

1 POLE - 5A SLIM POWER RELAY POWER RELAY POLE - A SLIM POWER RELAY FTR-MY Series RoHS compliant FEATURES Width mm, height mm,(% smaller than NY series) area mm, super slim, low power, compact and light weight.gr. Nominal power: mw

More information

If there is any doubt about the results, measurement shall be made within the following limits : Ambient temperature 25±3 Relative humidity 40%~70%

If there is any doubt about the results, measurement shall be made within the following limits : Ambient temperature 25±3 Relative humidity 40%~70% APPROVED : Tin SHEET : 2 of 10 Standard atmospheric conditions Unless otherwise specified, the standard range of atmospheric conditions for making measurement and tests are as follow : Ambient temperature

More information

High-ohmic/high-voltage resistors

High-ohmic/high-voltage resistors FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS

More information

USB3.0 Micro-B Connector

USB3.0 Micro-B Connector USB3.0 Micro-B Connector ZX360 Series General The ZX360 Series is a Micro-USB connector that is compliant with the MicroUSB 3.0 specifications and supports up to 5Gbps high speed data transmission. As

More information

Thick Film High Power Chip Resistors. Size W, W, /2W

Thick Film High Power Chip Resistors. Size W, W, /2W WF25P, WF20P, WF12P ±1%, ±5% 1Ω ~ 1MΩ Thick Film High Power Chip Resistors Size 2512 2W, 2010 1W, 1206 1/2W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF25-20-12P_V10

More information

USB 3.0 INTERNAL CONNECTOR AND CABLE SPECIFICATION

USB 3.0 INTERNAL CONNECTOR AND CABLE SPECIFICATION USB 3.0 INTERNAL CONNECTOR AND CABLE SPECIFICATION Revision 1.0 August 20, 2010 2007-2010 Intel Corporation All rights reserved. Legal Disclaimers THIS SPECIFICATION IS PROVIDED AS IS WITH NO WARRANTIES

More information

1 POLE - 16A 80A Inrush type. (b) Contact configuration A : 1 form A (SPST-NO) C : 1 form C (SPDT) (standard type "K" only)

1 POLE - 16A 80A Inrush type. (b) Contact configuration A : 1 form A (SPST-NO) C : 1 form C (SPDT) (standard type K only) FTR-K1 SERIES POWER RELAY 1 POLE - 16A 80A Inrush type FTR-K1 Series FEATURES Peak 80A inrush current (1 form A type) Low profile (height: 15.7mm) HIGH INSULATION Insulation distance (between coil and

More information

SB 175 Connectors - up to 280 Amps

SB 175 Connectors - up to 280 Amps Connectors - up to 280 Amps 2 Pole Wires sizes from #12 (3.3 mm²) to 1/0 (50 mm²) fit in the second to largest connector in the SB series. The 3 pole adds an additional position for power or grounding.

More information

Metallized Polypropylene Film Capacitor AC Filtering Radial Type

Metallized Polypropylene Film Capacitor AC Filtering Radial Type Metallized Polypropylene Film Capacitor AC Filtering Radial Type FEATURES High peak current capabilities Long lifetime Material categorization: for definitions of compliance please see www.vishay.com/doc?9991

More information

NARROW-PITCH (0.8mm) CONNECTORS P8 SERIES

NARROW-PITCH (0.8mm) CONNECTORS P8 SERIES Socket Header Compliance with RoHS Directive NRROW-PITCH CONNECTORS FOR PC ORDS 3. Perfect for portable devices, the bellows-type provide a strong resistance against falling, impacts, and forced insertions

More information

1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES

1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES POWER RELAY 1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES RoHS compliant FEATURES Ultra slim type with 5 mm thickness Good for high density mounting Low power consumption and high sensitivity Nominal

More information

SFxxx-S PID Test Report (Potential Induced Degradation) TUV Rheinland Japan. ARC Product Management 2015.07 Ver. 1

SFxxx-S PID Test Report (Potential Induced Degradation) TUV Rheinland Japan. ARC Product Management 2015.07 Ver. 1 SFxxx-S PID Test Report (Potential Induced Degradation) TUV Rheinland Japan ARC Product Management 2015.07 Ver. 1 Outline SLIDE 1 2 Outline What is PID? TOPICS 3 4 5 6 7 8 Principle of PID & resistance

More information

0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors

0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors 0.9 0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors FH43B Series Space saving 17.8mm(81 pos. shown) 2.77 Can be mounted over conductive traces. Features 1. Low-profile, small

More information

Product Data Sheet 3M Mini-Clamp II Plug and Socket Wiremount Connectors

Product Data Sheet 3M Mini-Clamp II Plug and Socket Wiremount Connectors PD-0050 Product Data Sheet 3M Mini-Clamp II Plug and Socket Wiremount Connectors Page: 1 of 10 Table of Contents 1.0 SCOPE...2 2.0 PRODUCTS TESTED...2 2.1 Cables Tested...3 3.0 GENERAL CONDITIONS...4 3.1

More information

PRODUCTS SPECIFICATION

PRODUCTS SPECIFICATION PRODUCTS SPECIFICATION ******************************************** DESCRIPTION : Optolock POF Transceiver Module for Ethernet CUSTOMER : COMOSS P/N : Date of Issue : June/05/2007 Version : 1.0 Designer

More information

Li-ion Polymer Battery Specification

Li-ion Polymer Battery Specification Customer: ME1421A Li-ion Polymer Battery Specification Model:HPL302030-130mAh Checked & Approved by Prepared by Date Andy Liu Wang Wei 2014-7-18 History of revisions Edition Prepared by Approved by Date

More information

Application Note AN-0994 Maximizing the Effectiveness of your SMD Assemblies

Application Note AN-0994 Maximizing the Effectiveness of your SMD Assemblies Application Note AN-0994 Maximizing the Effectiveness of your SMD Assemblies Table of Contents Page Method...2 Thermal characteristics of SMDs...2 Adhesives...4 Solder pastes...4 Reflow profiles...4 Rework...6

More information

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product Specification October 13, 11 V.8 Product

More information

CCM05 SD, MMC & minisd

CCM05 SD, MMC & minisd For one of the most common card formats, we offer various reading options in a small and sturdy packaging. This includes the smaller standard of the minisd, designed for the mobile communication needs.

More information

InGaN / Metal Alloy Warm White Water clear. Parameter Rating Unit

InGaN / Metal Alloy Warm White Water clear. Parameter Rating Unit Package Dimensions: * All dimensions are in mm * Tolerance: ±0.6mm unless otherwise noted. LED Chip Lens Colour Ant Part No. Material Colour Coordinates 703-0152 InGaN / Metal Alloy Warm White Water clear

More information

SMASH The high density interconnect system for harsh environment applications

SMASH The high density interconnect system for harsh environment applications 66 Amphenol Board Level Interconnect products SMASH The high density interconnect system for harsh environment applications The SMASH connector offers extremely high robustness where signal integrity is

More information

SMA Connectors. RF Coax Connectors. Product Facts

SMA Connectors. RF Coax Connectors. Product Facts SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes

More information

UTS discrete wire sealing

UTS discrete wire sealing Technical characteristics Mechanical Durability: 250 matings & unmatings Vibration resistance: Sinusoidal vibrations per CEI 605-4 - from 10 to 2000 Hz Thermal shock: 5 cycles 30 min. from -40 C to 105

More information

AC and Pulse Film Foil Capacitors KP Radial Potted Type

AC and Pulse Film Foil Capacitors KP Radial Potted Type AC and Pulse Film Foil Capacitors KP Radial Potted Type 0.5 L max. W max. Marking H max. FEATURES 5 mm lead pitch, supplied loose in box taped in ammopack or reel Material categorization: for definitions

More information

VX-705 Voltage Controlled Crystal Oscillator

VX-705 Voltage Controlled Crystal Oscillator X-705 oltage Controlled Crystal Oscillator X-705 Description The X-705 is a oltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q

More information

MAXIMUM LOAD CURRENT 1 A SN SERIES

MAXIMUM LOAD CURRENT 1 A SN SERIES SOLID STATE RELAY (I/O Module) MAXIMUM LOAD CURRENT 1 A SN SERIES RoHS compliant FEATURES I/O modules for interface between CPU and external input devices or loads Ultra slim and light weight, SIL s type

More information

ANOISON HPQN SERIES HPQN CONNECTORS INTERFACE DIMENSIONS. Description. Interface Dimensions 21 Characteristics

ANOISON HPQN SERIES HPQN CONNECTORS INTERFACE DIMENSIONS. Description. Interface Dimensions 21 Characteristics SERIES HPQN CONNECTORS DESCRIPTION CONTENT Designed by James Qu at Anoison in 2006, the HPQN is a quick locking version of the widely used type N connector. By replacing the threaded interface of the original

More information

1 POLE - 16A / Inrush 120A relay. (a) Relay type FTR-K1 : FTR-K1 Series (b) Contact configuration A : 1 form A C : 1 form C

1 POLE - 16A / Inrush 120A relay. (a) Relay type FTR-K1 : FTR-K1 Series (b) Contact configuration A : 1 form A C : 1 form C FTR-K1 SERIES POWER RELAY 1 POLE - 16A / Inrush 120A relay FTR-K1-KS Series FEATURES 1 pole 16A, 1 form A or 1 form C Peak inrush current 120A / TV-8 Coil power 400mW High insulation in small package (between

More information

CHS SLIDE SWITCHES (HALF PITCH) CHS - 06 T A 1 FEATURES PART NUMBER DESIGNATION. RoHS compliant

CHS SLIDE SWITCHES (HALF PITCH) CHS - 06 T A 1 FEATURES PART NUMBER DESIGNATION. RoHS compliant CHS RoHS compliant ITERAL STRUCTURE FEATURES Part name Cover Slider Housing Slider contact Fixed contact Material Polyphenylenesulphide Polyamide Polyphenylenesulphide Copper alloy, Gold-plated Flammability

More information

STPS40L15CW. 2 x 20 Amps SCHOTTKY RECTIFIER. Case Styles. I F(AV) = 40Amp V R = 15V. Bulletin PD-20622 rev. B 10/06. Description/ Features

STPS40L15CW. 2 x 20 Amps SCHOTTKY RECTIFIER. Case Styles. I F(AV) = 40Amp V R = 15V. Bulletin PD-20622 rev. B 10/06. Description/ Features Bulletin PD-20622 rev. B 0/06 STPS40L5CW SCHOTTKY RECTIFIER 2 x 20 Amps I F(AV) = 40Amp V R = 5V Major Ratings and Characteristics Characteristics Values Units I F(AV) Rectangular 40 A waveform V RRM 5

More information

Surface Mount Fuses 6125Size> Fast Acting > S6125-F-3.15A

Surface Mount Fuses 6125Size> Fast Acting > S6125-F-3.15A Page: 1 of 6 General Agency / Certificate Information Agency File Number Ampere Range JDYX2.E319540 1A~20A JDYX8.E319540 1A~20A PSE11020297 1A~5A PSE11020296 6.3A~10A Certificate File Number ISO9001:2008

More information

Micro-USB connectors meeting requirements of USB 2.0 Standard

Micro-USB connectors meeting requirements of USB 2.0 Standard NEW Micro-USB connectors meeting requirements of USB 2.0 Standard ZX Series Note: Contact us to ascertain whether a TID number has been acquired for an individual product. Overview Extremely small high

More information

COAX/SIGNAL HYBRID MICRO-D CONNECTORS

COAX/SIGNAL HYBRID MICRO-D CONNECTORS COAX/SIGNAL HYBRID MICRO-D CONNECTORS Omnetics high reliability Micro-D connectors are available with mixed coax/signal contact layouts. The number of coax and signal contacts may be specified to provide

More information

Surface Mount Fuses. 6125Size> High Inrush > S6125-H2-5.0A. Unit: mm

Surface Mount Fuses. 6125Size> High Inrush > S6125-H2-5.0A. Unit: mm Page: 1 of 6 General High Inrush withstand capability Wire-In-Air performance Wide range of current rating available 6.1mm 2.5mm square shape surface mount Higher temperature profiles -55 ~125 operating

More information

Flexibility. Housing. GRID Chevron grid Staggered grid. NUMBER OF ROWS 6 rows / 8 rows. For specific pitches or arrangements, consult us.

Flexibility. Housing. GRID Chevron grid Staggered grid. NUMBER OF ROWS 6 rows / 8 rows. For specific pitches or arrangements, consult us. 58 Interconnect products SMASH Advanced SEM E modular connector The SMASH connector offers extremely high robustness where signal integrity is required. Based on an aluminium shell with 1, 2 or 3 bays,

More information

VT-840 Temperature Compensated Crystal Oscillator, Voltage Controlled Temperature Compensated Crystal Oscillator

VT-840 Temperature Compensated Crystal Oscillator, Voltage Controlled Temperature Compensated Crystal Oscillator T-840 Temperature Compensated Crystal Oscillator, oltage Controlled Temperature Compensated Crystal Oscillator T-840 Description ectron s T-840 Temperature Compensated Crystal Oscillator (TCXO) is a quartz

More information

Waterproof Connectors for Outdoor Use

Waterproof Connectors for Outdoor Use Waterproof Connectors for Outdoor Use HR41A Series Mated condition diagram Nut-tightening rear mount type (panel thickness=mm) 70.5 Features 1. Waterproof connector designed for outdoor use Light-weight

More information

Reliability Testing Procedures. 10 pulses in the same direction at 2 pulses per minute at maximum peak current for 10 pulses

Reliability Testing Procedures. 10 pulses in the same direction at 2 pulses per minute at maximum peak current for 10 pulses Testing Procedures Parameter AD/DC Bias Pulse Current Capability Pulse Energy Capability Isolation Voltage Capability Environmental and Storage Mechanical Fire Hazard Test Tested According To Condition

More information

Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications

Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications FEATURES AEC-Q200 qualified with PPAP available Available in 0402 to 1812 body size Three dielectric materials AgPd termination

More information

PCB mounted UTS Hi seal: rugged & plastic

PCB mounted UTS Hi seal: rugged & plastic PC mounted UTS Hi seal: rugged & plastic Jam nut & Square flange receptacles with PC tail contacts were designed for applications in harsh environments where s are used in wet, corrosive and tight-space

More information

Signal Relays AXICOM. P2 Relay V23079. AXICOM Telecom-, Signal and RF Relays. P2 V23079 Relay. Coil Operating Range. Coil Data

Signal Relays AXICOM. P2 Relay V23079. AXICOM Telecom-, Signal and RF Relays. P2 V23079 Relay. Coil Operating Range. Coil Data P Relay V379 n Standard telecom relay (ringing and test access) n Slim line 5x7.5mm (.59x.95 ) n Max. switching current 5A n form C bifurcated contacts ( changeover contacts, CO) n Immersion cleanable

More information

Micro-USB connectors meeting requirements of USB 2.0 Standard

Micro-USB connectors meeting requirements of USB 2.0 Standard All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC_L series ±0.1%, ±0.5%, ±1%, ±5% Sizes 0075/0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512

DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC_L series ±0.1%, ±0.5%, ±1%, ±5% Sizes 0075/0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512 Product specification January 22, 2016 V.4 DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC_L series ±0.1%, ±0.5%, ±1%, ±5% Sizes 0075/00/0201/0402/0603/0805/ 1206/12/1218/20/2512 RoHS compliant & Halogen

More information

AMP. 5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Soft Shell Pin and Socket Connectors. Product Facts. Standard Density

AMP. 5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Soft Shell Pin and Socket Connectors. Product Facts. Standard Density 5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Product Facts Compact design with 19.4 mm mated height Power circuit connector with 5.0 mm contact centerline Wire-to-board connectors consisting of

More information

SDC15. TVS Diode Array for ESD Protection of 12V Data and Power Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics

SDC15. TVS Diode Array for ESD Protection of 12V Data and Power Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics Description The SDC15 transient voltage suppressor (TVS) is designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD),

More information

DISCONTINUED (1998) MINIATURE RELAY 1 POLE 1 to 2 A (FOR SIGNAL SWITCHING) FBR211 SERIES. RoHS compliant

DISCONTINUED (1998) MINIATURE RELAY 1 POLE 1 to 2 A (FOR SIGNAL SWITCHING) FBR211 SERIES. RoHS compliant MINIATURE RELAY POLE to 2 A (FOR SIGNAL SWITCHING) FBR2 SERIES RoHS compliant FEATURES 2 A maximum carrying current Capable of 2 A maximum continuous carrying current in the contact Superior reliability

More information

UTS discrete wire sealing

UTS discrete wire sealing Description Using proven grommet technology from SOURIAU s extensive knowledge of harsh environments, the UTS connector with grommet garanties a discrete wire sealing rated to IP67 (up to IP68 / IP69k

More information

High Voltage Surge Resistor

High Voltage Surge Resistor High Voltage Surge Resistor A metal glazed film is deposited on a high grade ceramic body. After that caps are applied to the rods and tinned electrolytic copper wires are welded to these end caps. The

More information

REQUIREMENT. GENERAL SPECIFICATIONS PARAGRAPH GENERAL Standard Materials

REQUIREMENT. GENERAL SPECIFICATIONS PARAGRAPH GENERAL Standard Materials SMA Specifications to MIL-C-39012 The specifications below are general specifications for all SMA connectors. Specific Data for VSWR, Insertion Loss, R.F. leakage, etc., are available from the factory

More information

COAXICON Contacts. RF Coax Connectors. Product Facts

COAXICON Contacts. RF Coax Connectors. Product Facts COXICON Contacts Product Facts Tyco Electronics provides a variety of contacts for coaxial connectors Contacts are available in a range of sizes that may be used with the various types of coaxial cable

More information