T*AP. Television Audio Processor - Specifications

Transcription

1 hardware 1RU Remote Panel Remote Panel display Remote Panel buttons Rotary encoder 8 channel audio DSP 4x 2 channel audio delay Dolby decoder Dolby encoder Dolby Metadata I/O Two interface slots 3G / HD / SD SDI module 4Ch AES I/O module 4Ch analog I/O module 4x 75Ohm AES I/O 4x SRC RJ45 POE RJ45 network USB 8 GPIs 8 GPOs Aux power supply External sync IN Sync OUT compact 19" processing device with front side controls and displays detachable panel with case, powered by POE (Power Over Ethernet) 8ch LED bar graph, OLED operating display, LED status display BYPASS, METER, context sensitive F-Keys, MENU, ESC predefined functions, context sensitive modes program configuration & 4x2 (8x1) up to 2sec.delay time each built in optional Dolby E or D or D+ or pulse decoder built in optional Dolby E or D or D+ or pulse encoder two RS485 9-pin Sub-D s I/O expansion slots for option boards option board with SDI de-embedder / embedder and relay bypass option board with 4 AES3id I/Os and relay bypass option board with 4 analog line I/Os and relay bypass on board with relay bypass selectable per AES input for connecting the Remote Panel 100BaseT full duplex Ethernet interface built in USB < > serial adapter to access the device service port balanced inputs on 25pin Sub-D relay change over contacts on 25pin Sub-D isolated 5V supply for external wiring 75Ohm input (Word Clock, AES, Black Burst, Tri-Level) 75Ohm Word Clock output 1/5

2 functional blocks Input Conditioner Upmix Compressor LevelMagic Loudness Control Output Conditioner Monitor output Extra Delay lines Signal routing Metadata generator Sync selector gain from mono / stereo to 5.1, extra input, auto mode, 5.1 cross fade Reference Level, Range, Ratio, Processing Leveler, Transient Processor, brick wall Limiter EBU R128 or ITU-BS.1770 or level based delay up to 2sec. per audio processor channel monitors DSP software blocks 4x 2Ch delays up to 2 sec. each assignment of signal paths to and from the DSP, the delays, the Dolby deand encoders and across I/O interfaces display, creation or modification of Dolby Metadata manual selection of several sync sources, auto fall back Wordclock, Video (Black Burst or Tri Level), AES, Interface Board control Remote Panel Browser based GUI Telnet Third party remote VSM control GPI GPO detachable 19" (fan less) standard web browser (IE 8, FireFox 3.x) access to the system console via L-S-B Broadcast Technology GmbH Ember protocol, HTTP protocol virtual panels, L-S-B remote panel 8 isolated inputs 8 relay output monitoring Power 1 Power 2 Temperature Device status Fan speed Input Signal loss Input Signal errors Processing range Internal module failure SNMP agent Loudness logging front panel LED, front panel LED, front panel LED, several GUI status displays, SNMP SNMP SNMPv1 based GET and TRAP functions Junger Audio Loudness Logger - PC software for file logging: live plot, bar graph display, offline display & analyzer 2/5

3 technical data Base Unit Power supply AES input AES output Sync internal Sync input Sync output Network USB GPI GPO dual power supply, auto fail over AC 85 V 264 V, 50 Hz 60 Hz 58W max AES3id 24 Bit, 48 khz, 0,32 1,2 Vpp sample rate converters: 24 Bit, 32 khz 192 khz, THD+N: < dbfs AES3id 24 Bit, 48 khz, nominal 1 75 Ohm 48 khz, +/- 10 ppm AES3id: 48 khz, 0,32 1,2 75 Ohm Wordclock: 48 khz, Ohm Video: Black Burst or Tri Level, 0.5 V 75 Ohm Wordclock: 2 75 Ohm RJ45 rear 10/100MBit Ethernet auto sense, full duplex, auto MDI/X RJ45 front panel 10/100MBit Ethernet auto sense, full duplex, auto MDI/X Power Over Ethernet IEEE 802.3af USB 2.0 to internal console interface 3 V 30 V balanced, auto polarity relay change over contacts, 200mA/24V (DC/AC) Environmental operating temperature 0 ºC to 50 ºC Base Unit - fan cooled non operating -20 ºC to 70 ºC humidity 90%, non condensing Dimensions and Weight 19", 1RU, depth 27 cm net weight approx..5 kg, shipping weight 7,5 kg technical data Remote Panel power supply consumption max cable length Dimensions POE (Power Over Ethernet), IEEE 802.3af 8 W if connected with the Base Unit, 30m distance CAT.5E (26AWGx4P) 19", 1RU, depth 6 cm Environmental operating temperature 0 ºC to 50 ºC non operating temperature -20 ºC to 70 ºC humidity 90%, non condensing 3/5

4 technical data interface boards SDI De-Embedder / Embedder [SDI 150] SDI input SDI output standards (auto sensing) 3G - SMPTE 424/425M (Level A/B) HD - SMPTE 292M SD - SMPTE 259M formats 1080p23.98, 24, 25, 29.97, 30, 50, 59.95, i50, 59.94, p23.98, 24, 25, 29.97, 30, 50, 59.94, i50 525i59.94, BNC IEC 169-8) 75 Ohm return Loss > 15 db (typ. > 18dB) from 5MHz to 1485 MHz > 10 db (typ. > 11 db) from 1485 MHz to 2970 MHz adaptive equalization, typical of Belden 1694A coaxial cable 250 m at 270 Mbps 250 m at Gbps 150 m at 2.97 Gbps jitter tolerance Timing: > 2UI, Alignment: > 0.7 UI standards 3G - SMPTE 424/425M (Level A/B) HD - SMPTE 292M SD - SMPTE 259M formats 1080p23.98, 24, 25, 29.97, 30, 50, 59.95, i50, 59.94, p23.98, 24, 25, 29.97, 30, 50, 59.94, i50 525i59.94, quantization 10Bit BNC IEC 169-8) 75 Ohm return Loss > 15 db (typ. > 18dB) from 5MHz to 1485 MHz > 10 db (typ. > 11 db) from 1485 MHz to 2970 MHz signal level 800 mv +/- 10% D.C. offset 0.0 V +/- 0.5 V rise and fall time < 135 ps at HD/3G, < 800 ps at SD overshoot < 10% of amplitude output jitter Timing: < 0.5 UI, Alignment: < 0.2 UI 4/5

5 Special features relay bypass (manual or automatic on power fail) 320 ms video delay (number of frames depends on the video format) 16 channel audio de-embedder / embedder VANC (SMPTE ) de-embedder / embedder 16 x 16 de-embedder matrix (mono routing) 32 x 16 embedder matrix (mono routing) 320 ms audio delay per audio channel automatic compensation of non processed audio signals for video delay technical data interface boards 4x AES I/O [DD 188] 25pin Sub-D female inputs 110 Ohm balanced or 75 Ohm unbalanced jumper selection 0.3 V 5.0 Vpp sample rate converter 24 Bit, input sample rate 32 khz 192 khz, THD+N < dbfs outputs 110 Ohm balanced or 75 Ohm unbalanced jumper selection 4.0 Vpp balanced, Ohm technical data interface boards 4x analog I/O [AN 144] 25pin Sub-D female input impedance: > 10 kohm, electronically balanced max input level: 0.0 dbu +24 dbu adjustable in 0.5 db steps dynamic range: 115 db -1 dbfs, 15 dbu: -90 db frequency response: 20 Hz 22 khz (+/ db) 20 khz: > 100 db calibration gain mismatch: < 0.3 db output impedance: 5 Ohm, electronically balanced max. output 0 dbfs: 0.0 dbu +24 dbu adjustable in 0.5 db steps dynamic range: 110dB -1 dbfs: 92 db frequency response: 20 Hz 22 khz (+/ db) 20 khz: > 100 db gain mismatch balanced / unbalanced: < 0.3 db warranty standard Junger Audio limited parts and labor warranty Specifications are subject to change without notice 5/5