UNIT 13 MANHATTAN WORKS DUNDONALD STREET DUNDEE, SCOTLAND DD3 7PY TEL : FAX : Bus h Cat al o gue
|
|
- Ralph Benson
- 7 years ago
- Views:
Transcription
1 UNIT MANHATTAN WORKS DUNDONALD STREET DUNDEE, SCOTLAND DD 7PY TEL : FAX : Bus h Cat al o gue
2 Contents TM Oil Impregnated Sintered Bronze Bushes (including Oilite ) Metric: Plain... Metric: Flange...6 Imperial: Plain...7 Imperial: Flange...9 Bars: Cored & Solid, Metric & Imperial...0 PTFE Lined Steel Split Bush (including Glacier TM ) Metric: Plain... Metric: Flange... Imperial: Plain...5 Thrust Washers and Strip - Metric & Imperial...6
3 Oil Impregnated Sintered Bronze Bushes Metric: Plain Ordering Example: AMC (for a mm long AMC 005) Ød (G7) ØD (s7) AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC
4 Oil Impregnated Sintered Bronze Bushes Metric: Plain (continued) Ordering Example: AMC 8 5 (for a 5mm long AMC 8) Ød (G7) ØD (s7) AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC Ød (G8) ØD (s8) AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC AMC
5 Oil Impregnated Sintered Bronze Bushes Metric: Flange Ordering Example: AMF (for a mm long AMF 006) Ød (G7) ØD (s7) AMF AMF AMF AMF AMF AMF AMF AMF AMF AMF AMF AMF AMF AMF AMF AMF AMF AMF AMF AMF AMF AMF AMF AMF AMF AMF AMF AMF AMF AMF AMF AMF AMF AMF ØD e Ød (G8) ØD (s8) AMF AMF AMF ØD e
6 Oil Impregnated Sintered Bronze Bushes Imperial: Plain All dimensions in inches. Ød ØD AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC AIC Please use the following table when ordering to ensure the correct length code: 0 = 05 = = 8 08 = 09 = 96 0 = 58 = = 78 6 = 8 = 8 0 = = 8 = 6 = 58 8 = 0 = 78 = 6 = 0 = 8 = For example: AIC , for the 8 long AIC 005
7 Oil Impregnated Sintered Bronze Bushes Imperial: Plain (continued) All dimensions in inches. Ød ØD AIC AIC AIC AIC AIC AIC AIC Secondary Sizes Ød ØD AIC 6FA AIC 68FA AIC 6FA AIC 60FB AIC 6FB AIC 60FB Please use the following table when ordering to ensure the correct length code: 0 = 05 = = 8 08 = 09 = 96 0 = 58 = = 78 6 = 8 = 8 0 = = 8 = 6 = 58 8 = 0 = 78 = 6 = 0 = 8 = For example: AIC 6, for the long AIC 6
8 Oil Impregnated Sintered Bronze Bushes Imperial: Flange All dimensions in inches. Ød ØD AIF AIF AIF AIF AIF AIF AIF AIF AIF AIF AIF AIF AIF AIF AIF AIF AIF AIF AIF AIF AIF AIF Secondary Sizes ØD e 7 8 Please use the following table when ordering to ensure the correct length code: 0 = 05 = = 8 08 = 09 = 96 0 = 58 = = 78 6 = 8 = 8 0 = = 8 = 6 = 58 8 = 0 = 78 = 6 = 0 = 8 = For example: AIF 005 0, for the long AIF 005 Ød ØD ØD e AIF FA AIF 0608FA AIF 0608FA AIF 60FA AIF 606FA AIF 608FA AIF 60FA
9 Oil Impregnated Sintered Bronze Bars Imperial & Metric Cored Bars Imperial (inches) Metric Equiv. (mm) Bore Outside Diameter Length Bore Outside Diameter Length Solid Bars Imperial (inches) Metric Equiv. (mm) Outside Diameter Length Outside Diameter Length
10 PTFE Lined Steel Split Bush Metric: Plain d D d D T M B M B DU 005DU M B M B M B DU 005DU 006DU M B MB MB MB DU 00DU 006DU 00DU M B MB MB DU 0508DU 050DU M B MB MB DU 0608DU 060DU M B DU M B M B M B DU 080DU 08DU M B MB MB MB M B DU 00DU 0DU 05DU 00DU M B MB MB MB M B M B DU 0 0DU DU 5 5DU 0 0DU 5 5DU M B MB DU 0DU M B MB MB MB M B M B DU 0DU DU 5DU 0DU 5DU M B MB MB MB M B DU 5DU 55DU 50DU 55DU M B MB MB MB M B DU 6DU 65DU 60DU 65DU M B DU M B MB MB DU 80DU 85DU M B MB MB MB M B DU 05DU 00DU 05DU 00DU M B MB MB MB DU 0 0DU 5 5DU 0 0DU M B MB MB MB DU 0DU 5DU 0DU M B MB MB MB M B DU 50DU 55DU 50DU 550DU M B MB MB MB DU 80DU 85DU 80DU M B MB MB MB M B DU 00DU 05DU 00DU 00DU M B MB MB DU 0 0DU 0 0DU M B MB MB MB M B DU 50DU 55DU 50DU 550DU M B DU M B MB MB MB DU 00DU 00DU 050DU B
11 PTFE Lined Steel Split Bush Metric: Plain (continued) d D d D T MB MB MB MB MB DU 50DU 50DU 55DU 550DU MB MB MB MB MB DU 500DU 500DU 5050DU 5060DU MB MB MB MB DU 555DU 550DU 550DU MB MB MB DU 5555DU 5560DU MB MB MB MB MB DU 600DU 600DU 6060DU 6070DU MB MB MB DU 6550DU 6570DU MB MB MB DU 7050DU 7070DU MB MB DU 7580DU MB MB DU 8000DU MB MB MB DU 8560DU 8500DU MB MB DU 9000DU MB MB DU 9500DU MB MB DU 005DU MB MB DU 055DU MB MB DU 05DU MB MB DU 570DU MB MB MB DU 060DU 000DU MB DU MB MB DU 000DU MB MB DU 580DU MB MB DU DU MB MB MB DU 5080DU 5000DU MB MB DU 6000DU MB DU B
12 PTFE Lined Steel Split Bush Metric: Plain (continued) d D d D T MB DU MB DU MB DU MB DU MB DU B
13 PTFE Lined Steel Split Bush Metric: Flange d D DF d D B T FMB FMB DU 0608DU FMB FMB FMB DU DU DU FMB FMB FMB FMB DU 009DU 0DU 07DU FMB FMB FMB FMB DU 09DU DU 7DU FMB FMB DU 7DU FMB FMB FMB DU 5DU 57DU FMB FMB DU 67DU FMB FMB FMB DU 87DU 8DU FMB FMB FMB DU DU.5 0.5DU FMB FMB FMB DU 56.5DU 5.5DU FMB FMB DU 06DU FMB FMB DU 56DU FMB FMB DU 06DU B
14 PTFE Lined Steel Split Bush Imperial: Plain All dimensions in inches. d D d D T B DU 0 0D U D U 05 05D U D U 0 0D U 0 0D U D U 0 0D U D U 06 05D U D U 06 06D U 08 06D U D U 08 7D U D U 06 08D U 08 08D U 0 08D U D U 08 09D U D U 08 0D U 0 0D U 7 0D U D U D U 08 D U D U D U D U D U D U 6D U 6 6D U D U 8D U D U 0D U 6 0D U 0 0D U D U 6 D U D U D U 6 D U 0 D U D U D U 6 6D U D U 6 8D U 8D U 8 8D U D U 6 0D U 0 0D U D U 6 D U D U D U D U 6D U 6 6D U 0 6D U D U 0D U 0 0D U 8 0D U D U D U 0 D U 8 D U D U 8D U 8 8D U D U 0 56D U 8 56D U D U 8 6D U 60 6D U D U 8 80D U D U 8 96D U D U
15 PTFE Lined Steel Thrust Washers & Strip Thrust Washers: Metric Part No. d D T H J Ta Strip: Metric Strip: Metric W C08DU M etric Sizes No H ole In lengths (L) of approx. 500mm W C0DU Part No. T W m m m m W CDU DU DU W CDU DU DU.00 0 W C6DU DU DU.06 0 W C8DU W C0DU W CDU W CDU W C5DU W C0DU W C5DU W C0DU W C5DU W C50DU W C60DU Thrust Washers: Imperial Strip: Imperial DU Inch Sizes In lengths (L) of 8in DU G roup No. T W in in DU DU DU DU DU All dimensions in inches. DU DU DU DU DU DU DU DU DU DU
Contents BUSHING S ELECTION P RODUCT S PECIFIC I NFORMATION TECHNICAL DATA A SSORTMENT. World s Widest Bushing Stock Assortment 2
Contents BUSHING S ELECTION World s Widest Bushing Stock Assortment 2 SKF Bushings Product Selection Guide 4 SKF Bushings Technical Data 6 Bushing Selection Overview of Technical Data Temperature range
More informationContents BUSHING S ELECTION P RODUCT S PECIFIC I NFORMATION TECHNICAL DATA A SSORTMENT. World s Widest Bushing Stock Assortment 2
SKF bushings Contents BUSHING S ELECTION World s Widest Bushing Stock Assortment 2 SKF Bushings Product Guide 4 SKF Bushings Technical Data 6 Bushing Selection Overview of Technical Data Temperature range
More informationA Table of the Most Common Standard Pipe Sizes. Nominal Bore 1/2 inch (DN 15 mm), Outside Diameter 21.34 mm
Standard Pipe Sizes Standard Pipe Sizes Except for specialist applications, commercially available pipe comes in standard sizes. Pipes in a variety of materials - including carbon steel, steel alloys,
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationSKF composite plain bearings. Compact and maintenance-free
SKF composite plain bearings Compact and maintenance-free Contents The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as
More informationANTIFRICTION BIMETAL MATERIALS AND COMPONENTS. Company Presentation www.bimetech.com
ANTIFRICTION BIMETAL MATERIALS AND COMPONENTS Company Presentation Company overview Production plant located in Torre Can.se (TO) - ITALY History and Company Presentation The history of BIMETECH S.r.l
More informationValves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+SBF CARBON STEEL Type: ball valve SBF ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar -
More informationFisher ENVIRO-SEAL and HIGH-SEAL Packing Systems for Sliding-Stem Valves (Live-Loaded)
Sliding-Stem Live-Loaded Packing Product Bulletin Fisher ENVIRO-SEAL and HIGH-SEAL Packing Systems for Sliding-Stem Valves (Live-Loaded) Fisher ENVIRO-SEAL and HIGH-SEAL live-loaded packing systems offer
More informationSJT / SJM / SJP Large Vertical Pumps
SJT / SJM / SJP Large Vertical Pumps The Heart of Your Process SJT, SJM, SJP Large Vertical Pumps Product Overview SJT Turbine Ns 1800 < 5000 nq 35 < 110 SJM Mixed Flow Ns 5800 < 8300 nq 113 < 161 SJP
More informationBWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS The BWX series butterfly valve has been especially designed for use in cryogenic applications with high quality CrNi steel. Testing of the valve includes
More informationTRUSTED SOLUTIONS AND INNOVATION WEAR PRODUCTS
TRUSTED SOLUTIONS AND INNOVATION WEAR PRODUCTS Inch & Metric Sizes Self-Lubricating & Standard Models 1 WEAR PRODUCTS Service We Deliver and Quality You Can Depend On DANLY IEM is a leading manufacturer
More informationModel 362A AURORA. 340A/360A Series SINGLE STAGE END SUCTION PUMPS. www.aurorapump.com
Model 62A MODEL 41A MODEL 44A AURORA 40A/60A Series SINGLE STAGE END PUMPS www.aurorapump.com SINGLE STAGE END PUMPS AURORA 40A/60A Series Single Stage End Suction Pumps Capacities to 4500 G.P.M. (1022
More informationFor New Technology Network. Steel Manufacturing Machinery Product Guide Book
For New Technology Network R Steel Manufacturing Machinery Product Guide Book Ecological / Economical proposals from NTN NTN products exhibit benefits at various locations. Steel manufacturing equipment
More informationAPI Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
More informationProduct Catalogue. ETX, Stainless steel threaded centrifugal pumps, 50 Hz
Product Catalogue ETX, Stainless steel threaded centrifugal pumps, Hz Contents Introduction... ETX... Choosing the right pump There are a wide range of pumps to select from. In order to find the right
More informationPerformance Cylindrical OD Bearings (ER) Felt Seal & Flinger. Grade 10 Steel Balls. Lubrication Groove. Zone Hardened. Black Oxided.
Mtd. Ball Performance Cylindrical OD (ER) Sealmaster ER Style Ball Sealmaster Gold ER bearings feature a cylindrical OD and snap ring for easy installation in a roll assembly. Shaft lock is achieved by
More informationARB AIR LOCKER Air Operated Locking Differentials
CKMTA12 & CKMTA24 On-Board Air Compressor Kit, Maximum Performance Specs: ITEM # QTY DESCRIPTION PART # NOTES 01(a) 2 COMPRESSOR ASSEMBLY (12V) CKM01 1 Voltage 12 Volts (CKMTA12), 24 Volts (CKMTA24) 01(b)
More informationStainless Steel Valves For the Sanitary Industries
www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves
More informationNELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE Series Mapag BA is a wafer type butterfly valve with a one piece body and soft seat.. It is specially designed
More information1.8 CRANKSHAFT OIL SEALS
SERIES 60 SERVICE MANUAL 1.8 CRANKSHAFT OIL SEALS An oil seal is fitted between each end of the crankshaft and the bores of the flywheel housing and gear case cover to retain the lubricating oil in the
More informationMVX-Series Diesel Engine Air Shut Down Valves
MVX-Series Diesel Engine Air Shut Down Valves (Cable operated closure/integral reset lever types) Selection, Application and Maintenance SPECIAL VALVE MVX-304 This is a special version of valve type MVX-303
More informationTRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS
www.danly.com TRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS Quality & performance Quick delivery Precision Components www.danly.com CATALOG DIE SETS Service We Deliver and Quality You Can Depend On
More informationThe Keep It Simple, Steel (KISS) Standard
The Keep It Simple, Steel (KISS) Standard A standard Electronic Data Interchange (EDI) format for the exchange of Bill of Material (BOM) information within the steel fabrication industry Updated in March
More informationPlain Bearings. For Everything That Moves
Plain Bearings For Everything That Moves INA metal-polymer composite (MPC) plain bearings, maintenance free or low maintenance INA plain bearings with Elgotex, also available as segmented bearings ELGES
More informationFlanged and Butt-= Weld Type
Document : PG00 Year : 09 Product Group 00 Flanged and Butt-= Weld Type (LNG and LPG) Page 09 Document : PG00 Year : 09 Product Group 00 Cryogenic Butterfly valves The Cryogenic Butterfly Valve Design
More informationWafer, Semi-Lug, Lug and Double Flanged Type
Wafer, Semi-Lug, Lug and Double Flanged Type Page 1 www.globalvalvecenter.com 2011 Description The centric replaceable liner butterfly valve is capable of bi-directional flow and bubble tight shut-off
More information1.0 2.0 3.0 4.0 5.0 6.0 7.0. Q [m 3 /h] Wilo-Star Cast iron body 60 Hz. Star 30 F. Star 21. Star 17 FX. 4 8 12 16 20 24 28 Q [US gpm]
Product review: Range: Wilo-Star....... Star F Star Star Star F Star Star FX [m /h] Wilo-Star Cast iron body Hz [US gpm].......... [m /h] Wilo-Star Bronze body 9 Hz [US gpm] Star Star Star Star Star BF
More informationDTU Animal Cart Programme
DTU Animal Cart Programme TECHNICAL 21 RELEASE PIPE AND ROLLER DONKEY CART AXLES Development Technology Unit, Department of Engineering, University of Warwick, Coventry, CV4 7AL UK, tel: +44 (0)1203 523523
More informationAIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
More informationHose and Tube Fittings Series 1-3
Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose
More informationUSED BUT NOT SHOWN: ITEMS 11-24.
FO000900 - TABBING SYSTEM, MCS TABBER 2" Item Part Number Description Quantity 1 SM022604 Base Sub Assembly, MCS Tabber (2") 1 2 AF000512 Tabbing Head, MCS 2" 1 3 VC014001 Cable, Molded, DB25M-DB25F, 3
More informationThe conditions below apply to the curves shown on the following pages.
GENERAL INFORMATION STAINLESS STEEL, SILVERLINE, EVERGREEN & GOLDLINE SERIES PERFORMANCE CURVE CONDITIONS The conditions below apply to the curves shown on the following pages. a. The Performance curves
More informationBaumann 24000 Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature
More informationBALL VALVES TECHNICAL CATALOGUE
SITINDUSTRIE VALVO VALVES BALL VALVES Ed. 01/NOV-2004 SITINDUSTRIE reserves the right to change, without notice, 1/16 SITINDUSTRIE VALVE DIVISION We are pleased to introduce you to the ball valves manufactured
More informationSpiroflex spiral-wound gaskets
Spiral-wound gaskets have long been used as sealing elements in refineries, chemical plants, gas installations, water treatment plants and in general pipeline construction. Spiroflex gaskets SpV retain
More informationI N D U S T R I A L C A B L E G L A N D S
Introduction 1/2 Industrial Cable Gland W Industrial Cable Gland WL Heavy Duty Industrial Cable Gland CW Industrial Cable Gland CZ Industrial Cable Gland 1W Industrial Cable Gland 1Z Industrial Cable Gland
More informationStainless Steel Tubular Products
Stainless Steel Tubular Products r Disclaimer This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary
More informationMinimum Breaking Force of Wire Rope (for Winches) 6 x 19 Classification / Bright (Uncoated), IWRC
Minimum Breaking Force of Wire Rope (for Winches) 6 x 19 Classification / Bright (Uncoated), IWRC Wire rope Selection Rope Size (in) Approximate Weight (lb / ft) Minimum Breaking Force Extra Improved Plow
More informationThat s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance
[ That s ] E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250 Training reality with industrial performance Concept TURN 250 Uncompromising quality right down to the last bolt, at an unbeatable
More informationTechnical data sheet TDS0070
Technical data sheet TDS0070 ATEX Certified II 2 G Ex d IIC T4 Gb IECEx Certified Ex d IIC T4 Gb Ta = -20ºC to +60ºC FEATURES INCLUDE: - ATEX and IECEx Certified explosion proof Exd housing for Premier
More informationVIKING UNIVERSAL SEAL PUMPS. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options. Operating Range1: Nominal Flow Rates:
VIKING UNIVERSAL SEAL PUMPS Section 630 Page 630.1 Issue G Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Options Operating Range1: Cast Iron Series 124A/AE, 4124A/AE, 4124B, 324A, 4324A, 224A/AE,
More informationTechnical Data. 7. Bearing Fits. 7.1 Interference. 7.2 Calculation of interference F B LLLLLLLLL( A-54
Technical Data 7. Bearing Fits 7.1 Interference For rolling s the rings are fixed on the or in the housing so that slip or movement does not occur between the mated surface during operation or under. This
More informationFisher D3 Control Valve
D3 Valve Product Bulletin Fisher D3 Control Valve The Fisher D3 control valve is a compact, rugged valve designed for on/off or throttling control, and utilizes FloPro technology, using either pneumatic
More information4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
More informationSteering unit. Table of contents. Features RE 11872/05.06. Type LAGL. Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min
Steering unit RE 11872/05.06 /10 Type LAGL Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min H7375 Table of contents Contents Page Features 1 Ordering code 2 Function, section 3 Device
More informationCurrent Transformers
Supersedes December 2002 General Description Eaton s low voltage current transformers are available in both solid core and split core designs. Engineered for electronic metering applications, all solid
More informationSpecialising in miniature, thin-section and corrosion-resistant bearings
Specialising in miniature, thin-section and corrosion-resistant bearings www.smbbearings.com About Us Originally founded in 1985, Bearings are a specialised worldwide supplier of miniature bearings, thin-section
More information000594 Eye-bolt for front chain adjustment, Pre-49 singles, 1949-55 twins, 1958-on CS singles 7.60 6.33
Part No. AJS & MATCHLESS GEARBOX & CLUTCH - NEW PARTS Price (20% VAT) Price (excl VAT) Tool for adjusting clutch spring nuts (heavier duty than 017254 spanner) 5.00 4.17 017254 Spanner, single end, dynamo
More informationMaster Anamorphic T1.9/35 mm
T1.9/35 mm backgrounds and a smooth, cinematic look, the 35 Close Focus (2) 0.75 m / 2 6 Magnification Ratio (3) H: 1:32.3, V: 1:16.1 Weight (kg) 2.6 Weight (lbs) 5.7 Entrance Pupil (7) (mm) -179 Entrance
More informationSeries 3240 Globe Control Valve Type 3241 (241) Pneumatic Control Valves Type 3241/3271 (241-1) and Type 3241/3277 (241-7)
Series 32 Globe Control Valve Type 3241 (241) Pneumatic Control Valves Type 3241/3271 (241-1) Type 3241/3277 (241-7) Application Control valve for process engineering plants with industrial requirements.
More informationPRODUCT RELEASE CKMTA12 / 24. Copyright 2011 by ARB Corporation Limited
PRODUCT RELEASE CKMTA12 / 24 Copyright 2011 by ARB Corporation Limited ARB 4x4 ACCESSORIES 720 SW 34Th Street Tel: (425) 264-1391 Renton, Washington 98057 Fax: (425) 264-1392 USA North and South American
More informationPOWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
More informationSISTO-16TWA/HWA/DLU. Type Series Booklet
Diaphragm Valve SISTO-16TWA/HWA/DLU PN16 DN 15-200 Maintenance-free Flanged Ends Type Series Booklet Legal information/copyright Type Series Booklet SISTO-16TWA/HWA/DLU All rights reserved. The contents
More informationOUTCOME 1 STATIC FLUID SYSTEMS TUTORIAL 1 - HYDROSTATICS
Unit 41: Fluid Mechanics Unit code: T/601/1445 QCF Level: 4 Credit value: 15 OUTCOME 1 STATIC FLUID SYSTEMS TUTORIAL 1 - HYDROSTATICS 1. Be able to determine the behavioural characteristics and parameters
More information2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow
2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow RE 18309-64/04.10 1/6 Replaces: RE 00171/02.07 A-VRFC2C-VEI-VS-LS 0M.28.03.80 - Y - Z Description
More informationSpira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationCylinders DIN ISO 6431 and VDMA 24 562
Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets
More informationNuffield and Middleweight Leyland Tractor - 11 inch - Double Clutch Overhaul Part 1 - Clutch Removal and Dismantling
Nuffield and Middleweight Leyland Tractor - 11 inch - Double Clutch Overhaul Part 1 - Clutch Removal and Dismantling Due to the many different configurations of cabed and non-cabed tractors this article
More information3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow
1/6 RE 18309-3/06.10 Replaces: RE 18309-3/04.10 3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z Description The flow control
More informationExperience In Motion. Valtek Spring Cylinder Linear Actuators
Experience In Motion Valtek Spring Cylinder Linear Actuators Valtek Spring Cylinder Linear Actuator Flowserve spring cylinder linear actuators are powerful, compact, high-performance pneumatic actuators
More informationMPX-Series Diesel Engine Shut Down Valves (Manual Reset / Air Pressure and Manual Closure Options)
MPX-Series Diesel Engine Shut Down Valves (Manual Reset / ir Pressure and Manual Closure Options) Selection, pplication and Maintenance Valve Numbers MPX-300 MPX-301 MPX-302 MPX-303 MPX-310 MPX-500 MPX-501
More informationS GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
More informationISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
More informationInstallation instruction CASAFLEX - Connecting piece DN 100
1 CASAFLEX - 11 10 114,3 x 4,5 3 5 2 4 1 7 6 8 12 9 Do not begin work until you have read the installation instruction carefully. 1 internal backing sleeve 2 graphite packing 3 connecting piece 4 thrust
More informationHOSE, TUBE, AND PIPE CLAMPS
hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions
More informationTECHNICAL DATA. 2. LISTINGS AND APPROVALS See Tables 1 & 2.
May 3, 2013 Foam 138a 1. DESCRIPTION Chemguard Water Powered Oscillating Monitors are designed to automatically discharge over a specific design area upon system activation. These are suitable for use
More informationCRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
More informationCylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431)
Cylinders Series 40 Double acting, cushioned, magnetic ø60-200 - 250 (DIN/ISO 643)»»» DIN/ISO 643 VDMA 24562 Rolled stainless steel rod Adjustable cushioning The cylinders Series 40 with diameters 60,
More informationInstallation information. METTLER TOLEDO MultiRange DW150 / DW150T wall scale
Installation information METTLER TOLEDO MultiRange DW150 / DW150T wall scale DW150 / DW150T wall scale Contents Contents Page 1. Installation... 2 1.1 Preparatory work... 2 1.2 Installing the wall plates
More informationSUPER-TITAN. Split-case pumps with power, performance and reliability for a world of applications
SUPER-TITAN Split-case pumps with power, performance and reliability for a world of applications The Prestige. The Performance. SUPER-TITAN PUMPS Features The TKL Super-Titan pump makes a significant contribution
More informationCharts (Section XI) www.accordintl.com Ph. (713) 641-2288 Fax (713) 641-3636 Main PAGE #
Charts (Section XI) Part No. Description Page No. Fraction, Decimal, and Millimeter Conversion Chart 2 Measurement Chart (Metric & Standard) 3 Standard (ANSI B16.5) Flange Dimension Chart 4 Metric Flange
More informationVe-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
More informationY O U R G L O B A L G A S K E T P R O V I D E R
Revised 02-12-13 CONTENTS MANUFACTU UNITS 2 INTRODUCTION 3 GASKET IDENTIFICATION 4 AVAILABLE GASKET MATERIALS 5 GASKET SELECTION 6 DIMENSIONAL DATA 7 1 - STYLE CG & CGI TO ASME B16.20 TO SUIT ASME B16.5
More informationFLANGED END BALL VALVE
Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material
More informationPOINT OBSTRUCTION LIGHTS POL INCANDESCENT POINTSPEC SERIES
INCANDESCENT Compliances: ETL Listed to UL 1598 USA ETL Listed to CSA C22.2 No. 250.0-04 Canada ETL Certified FAA L-810 per FAA AC 150/5343G ICAO Annex 14 Low Intensity Types A (10 cd) & B (32 cd) IMO
More informationTHRUST NEEDLE ROLLER AND CAGE ASSEMBLIES Assembly Dimensions, Load Ratings, Thrust Washer and Piloting Dimensions... 480-487
Thrust Bearings Page Nomenclature............................................ 474 Introduction............................................. 476 Identification.............................................
More informationMULTISTAGE CENTRIFUGAL PUMPS
MULTISTAGE CENTRIFUGAL PUMPS MULTISTAGE CENTRIFUGAL PUMPS TK - TKR - VTK - TKK series TK-VTK-TKR-TKK are high pressure multistage pumps. Connection to the driving machine (generally an electrical motor)
More informationQLM and QLD Series Three-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSeries 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
More informationKTZ32.2-51. data sheet parts list exploded view dimensional drawing sectional drawing performance curve. parts list as Excel-spreadsheet
KTZ32.2-5 data sheet parts list exploded view dimensional drawing sectional drawing performance curve parts list as Excel-spreadsheet Heltorfer Str.6 40472 Düsseldorf Germany Tel.: +49-2-479373 Fax: +49-2-479429
More informationChapter 5 FLOOR LOADING AND WEIGHTS
Chapter 5 FLOOR LOADING AND WEIGHTS Section 1.0 Floor Loading Section 2.0 Seismic Data The CT system has a total floor load of approximately 6660 lbs (3021 kg). About 5050 lbs (2291 kg), including patient
More informationAfrica s leading steel supplier CATALOGUE TUBE & PIPE. The Macsteel Group - Africa s leading steel supplier - www.macsteel.co.za
Africa s leading steel supplier CATALOGUE TUBE & PIPE - www.macsteel.co.za TUBE & PIPE CONTENTS 1. Contents 13. Conveyance SANS 1182 - Light Page 7 2. Contact Details 14. Conveyance SANS 719 - Large Bore
More informationMEASURING TOOLS POINT MASTER PRO PMP POINT MASTER PMC POINT CENTER BASE MASTER SERIES TOOL MASTER ACCU CENTER. ALIGNMENT TOOL for ATC arm DYNA FORCE
MEASURING TOOS POINT MASTER PRO PMP POINT MASTER PMC POINT CENTER BASE MASTER SERIES TOO MASTER ACCU CENTER AIGNMENT TOO for ATC arm DYNA FORCE TOO PRESETTER type TPS EVE MASTER 3 3 4 5 5 6 7 8 9 MEASURING
More informationMetal-O-rings and C-rings for extreme operating conditions
Metal-O-rings and C-rings for extreme operating conditions From ultrahigh vacuum up to 6800 bar (100000 psi) pressure and temperatures from -269 C cryogenic up to +980 C (-425 F up to 1800 F). Resistant
More informationPLUMBING RE-SUBMITTAL 22 11 17
PLUMBING RE-SUBMITTAL 22 11 17 ACADEMIC BUILDING & PATRIOT S CASA TEXAS A&M UNIVERSITY - SAN ANTONIO, TX NO. 25-3122, VAC NO. 39019 OWNER: ARCHITECT: MEP ENGINEER: GENERAL CONTRACTOR: PLUMBING CONTRACTOR:
More informationMessko. Messko. MTraB - Maintenance Free Dehydrating Breather Ordering specifications 686 - XX - XX - XXX - XX
Ordering specifications MTraB -Series Maintenance Free Dehydrating Breather Part no.: 686 - - - - Form your part number by selecting the individual parameters: For example: 686-10--103- Part no.: Parameter
More informationNormcylinder 1.5002. Technical data. tension-rod cylinder. according DIN ISO 6431 VDMA 24562 DI/DIM DIM DIMB
Normcylinder Universal application through accomodating on DIN ISO 6431 and VDMA 24562 Part 1. Fastening elements according DIN ISO 6431, VDMA 24562 Part 2. Technical data Tension-rod-cylinder according
More informationARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP
ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP ARI-DP30 Pneumatic actuator Page 2 ARI-DP32 ARI-DP33 Pneumatic actuator DP-Actuator Extended stem
More informationFLEXWELL Safety Pipe. Pipe systems for installations Technical details
Pipe systems for installations Technical details Notes 08.04.2013 T page 2 Contents 4.0 4.0 Contents 4.1 System description 4.100 System description FLEXWELL Safety Pipe 4.105 System description FLEXWELL
More informationMVX-Series Diesel Engine Shut Down Valves (Cable Operated Closure/Integral Reset Lever Types)
MVX-Series Diesel Engine Shut Down Valves (Cable Operated Closure/Integral Reset Lever Types) Selection, pplication and Maintenance Valve Numbers MVX-301 MVX-302 MVX-303 MVX-501 MVX-502 MVX-503 MVX-801
More information2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
More informationHTM SS Metallic mag drive centrifugal pumps. HTM SS Pompe centrifughe a trascinamento magnetico in metallo FEATURES
HTM SS Metallic mag drive centrifugal pumps HTM SS Pompe centrifughe a trascinamento magnetico in metallo FEATURES CARATTERISTICHE Le pompe centrifughe in metallo a trascinamento magnetico serie HTM SS
More informationVandal-proof keypad series
Model No. LBKP35900 / LBKP35900E (Encryption available) Interface: PS2, USB available. Dimensions: 100mm x 91.5mm No. of keys: 16 keys, high quality stainless steel G.W.: 0.75kg. All languages version
More informationFurniture Fittings Furniture Handles and Knobs
Handle profile - Aluminium 21 mm 1.5 mm 2,500 mm 126.21.02 30 mm 126.22.0 11.5 mm 1.5 mm 2,500 mm 126.20.05 AH.4 Dim. A Dim. B Length Usable length Cat. No. 34.5 mm 8.5 mm 2,500 mm 2,460 mm 126.15.00 Dim.
More informationBaumann 24003 3 Way Bronze or Stainless Steel Control Valve
Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control
More informationRINGFEDER. RINGFEDER Products are available from MARYLAND METRICS
RINGFEDER KEYLESS SHAFT/HUB CONNECTIONS RINGFEDER Products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: sales@mdmetric.com web: http://mdmetric.com phones: (410)358-3130
More informationTex-421-A, Splitting Tensile Strength of Cylindrical Concrete Specimens
Contents: Section 1 Overview...2 Section 2 Apparatus...3 Section 3 Test Specimens...4 Section 4 Procedure...5 Texas Department of Transportation 1 08/99 06/08 Section 1 Overview Effective dates: August
More information1 1.5" (38 mm) Diameter
CAB Cable Rings and Saddles are offered in all sizes and materials. Please call or email if your preferred item is not listed on these charts. TABLE OF CONTENTS Part Numbers for 1.5 inch (38mm) diameter
More information