CHARACTERISTICS. Replacing driver in Magnolia luminaire. ROSA LED technical data BUILDING AND CONSTRUCTION OF DRIVER LIGHT SOURCE

Transcription

1 OUTDOOR LIGHTING

2 Rosa company has expanded it s range with ROSA LED. The range includes street lighting luminaires, park luminaires and lighting columns. The production technologies for anodized aluminum columns are also used to produce aluminum lighting luminaires, in which the light source is LED. This combination makes the series ROSA LED not only economical, ecological and durable, but also aesthetic. S LIGHT SOURCE The light source in the ROSA LED series is the CREE LED XM-L with a luminous flux of 280 lumens from a single chip, achieving efficiency of over 137lm / W at 700mA DC power supply. It is characterized by a very low thermal resistance of 2.5 C / W. This allows optimum output by the LED to the radiator. A colour rendering index CRI is over 75. ROSA use the best quality LEDs throughout the product range to ensure optimum performance whilst maintaining maximum economy. COLOUR TEMPERATURE OF LIGHT The ROSA LED series allows selection of one of two variants of light colour temperature. Each luminaire accepts LEDs with colour temperatures of 5000 K a neutral white light or 3500 K a warm light. These variants are marked in the product code number 3 for the temperature 3500 K and number 6 for the 5000 K. The choice of one of these options makes no difference to the luminaire cost but depends on customer preference. OPTICAL MODULE The optical module consists of a printed circuit board MCPCB on which LEDs are placed together with protection elements. It is integrated with a specially designed lens to hold the LED. The asymmetric lens is made of PMMA with increased temperature properties. The whole optical system is assembled on the radiator surface. LUMINAIRES CONSTRUCTION Luminaires construction consists of profiles and sheets of aluminum alloy with excellent thermal properties and thermal conductivity (> 200W/mK). The luminaire body is anodized, which further increases the discharge of heat by radiation. In the case of street lighting luminaires the angle of inclination can be adjusted from + 15 to 15. The colours presented in the pictures are standard colours. The ROSA anodising colour range includes 12 colours available on request at no additional cost. DURABILITY Economical use of LED luminaires is also improved due to the long life of LEDs (minimum 50,000 hours) and correct construction of the luminaire body. In addition materials used, protection of LEDs and effective heat dissipation guarantee the durability of these products, resulting in a significant reduction in service and maintenance costs. PHOTOMETRY All LED luminaires have been subjected to photometric tests conducted by an independent specialist. Luminaires will also be subject to additional tests in our company laboratory. BUILDING AND CONSTRUCTION OF DRIVER The LED driver used in ROSA luminaires can easily be removed without tools. It has four current outputs which are used depending on the type and power of luminaire. The driver is also equipped with necessary safeguards: overvoltage, short circuit and LED overheating protection. When the driver control system detects that the radiator surface temperature is too high - it immediately reacts by reducing the LED supply current and hence power dissipated in them. This condition persists until the temperature has dropped to a safe level. Then the LEDs will again work in optimal conditions and the current supply will be increased to the previous value. Replacing driver in Magnolia luminaire Opening of Magnolia cover Unscrewing the driver and disconnecting the power plug without any tools ROSA LED technical data Configuration changes of luminous flux in time (temporal profile) is realized with the a help of dedicated software for the adapter. It allows setting of up to five levels of light intensity during one cycle of light fixtures, which directly affects the lower operating costs. Moreover it is possible to program two independent temporal profiles in one luminaire, switchable by an appropriate sequence of starts and stops of luminaire power. The driver has a light sensor circuit, which allows the addition of a photcell, so that the luminiare has the capacity for automatic switching on at twilight and off at daybreak. Removing the driver Operating temperature range from 40 C to + 40 C Protection degree IP for optical system and driver LED type Colour temperature IP67 CREE XM-L K (neutral white light) or K (warm light) Colour rendering index CRI 75 Lifetime of L70 LEDs Lens Voltage Driver Frequency voltage h Asymmetric, made from PMMA V Programmable, with possibility to set power consumption reduction 50/60Hz Construction of optical module used in the ROSA LED LED CREE XM-L The power factor >0,

3 ECONOMY The main advantage of LED lighting is its efficiency compared to traditional light sources. At the same light output, LEDs use less energy than traditional lamps - for example, the new MIRA LED 36 park lighting luminaire achieves light output higher then an OPA-1 S-70W luminaire. Using Rosa LED products energy consumption per year will decrease up to 73%. Spacing of lighting sets on the analyzed area using luminaire MIRA LED 36 SAMPLE ANALYSIS OF SAVINGS USING MIRA LED 36 LUMINAIRE Sample analysis was performed using the following : illumination of outdoor rectangular area of 132 m 20 m, parameters to obtain standard required by class S3, columns installed facing opposite along long sides of the area lighting solution based on a column 4.5 m, comparison of the luminaire OPA-1 S-70W Son with opal diffuser Atlantis and anodized aluminum luminaire MIRA LED 36, total time of lighting road luminaire in a year is 4126,30h. The results of analysis are as follow: Total power consumption of luminaire MIRA LED 36 Total power consumption of luminaire OPA-1 S-70W Annual total power consumption of luminaire MIRA LED 36 (41W x 4126,30h) Annual total power consumption of luminaire OPA-1 S-70W (79W x 4126,30h) MIRA LED 36 annual savings in electrical energy consumption 41W 79W 169 kwh 326 kwh 48% According to the calculations for the proper fulfillment of the requirements in class S3 area illuminated with MIRA LED luminaires require the installation of less lighting sets than using OPA-1 S-70W luminaire number of lighting sets necessary to meet the assumptions of using luminaire MIRA LED 36 number of lighting sets necessary to meet the assumptions of using luminaires OPA-1 S-70W saving on the amount of lighting sets 25% Reducing the number of lighting sets has a direct impact on reducing the total annual power consumption of the entire investment Annual total power consumption of 12 sets with luminaires MIRA LED 36 (12 x 169 kwh) Annual total power consumption of 16 sets with luminaires OPA-1 S-70W (16 x 326 kwh) Total power saving of whole investment 61% 2028 kwh 5216 kwh The following savings can also be achieved through the use of luminous flux reduction at certain hours of the night through the programmable driver installed in the luminaire. For example, by dimming the MIRA LED luminaire by 50% for 6 hours during the night from to 5.00 will achieve an overall power reduction of 30%. W 100% 50% 0% 20:00 21:00 22:00 23:00 00:00 01:00 02:00 03:00 04:00 05:00 06:00 using a luminous flux reduction (additional 30%) -30% Total calculated power saving for the whole investment with using luminaire MIRA LED 36 73% Moreover in the guarantee period 5-10 years or hours there is no maintenance costs assosiated with ROSA LED luminaires. This results in additional savings. LED lighting also brings improvement of quality of light and ecological thinking compared to traditional light sources. h MIRA LED 36 OPA-1 S-70W Em [lx] Em [lx] ECOLOGY Emin [lx] Emin [lx] Emax [lx] Spacing of lighting sets on the analyzed area using luminaire OPA-1 S-70W Emax [lx] Care for the environment and safety has created a huge demand for environmentally-friendly solutions. LEDs do not emit UV or infrared radiation. Rosa LED products use less energy, causing reduction of carbon dioxide emissions in electricity production. All luminaires are according to Standard PN-EN Photo biological safety of lamps and lamp systems and do not cause damage to eyes in normal use. Luminaires are made from renewable materials, mainly aluminium, that can easily be recycled again and again. ROSA LED products are compatible with the RoHS Directive, which places restrictions on the production stage in the use of dangerous substances in electronics. In accordance with the Dark Sky anti light pollution policy, light from the ROSA LED luminaires is directed only downward Emin / Em Emin / Em Emin / Emax Emin / Emax In addition ROSA, LED products are compatible with the following directives: Directive LVD 2006/95/WE on the harmonization of the laws of the Member States relating to electrical equipment designed for use within certain voltage limits; Directive EMC 2004/108/WE the laws of the Member States relating to electromagnetic compatibility; Directive RoHS 2002/95/WE on reducing the use of certain dangerous substances in electrical and electronic equipment. ROSA PRODUCTS CARRY A 5 YEAR GUARANTEE WHICH CAN BE EXTENDED UP TO 10 YEARS

4 MIRA LED MIRA LED combines exceptional design with modern technology and is the ideal solution for walkways, parks and squares. It complements its location to give a unique atmosphere. MIRAL LED is made in corrosion free anodized aluminium sheet, giving it superior durability. The standard luminaire colour is a combination of two colours: Inox and graphite. The luminaire is available in other ROSA anodised colours on request MIRA LED is designed to be pole top mounted on 4 to 5 m columns using the slip over mounting sleeve. Spigot entry 60 mm. The advantages of using MIRA LED 36 compared to OPA-1 S-70W Son (external illuminated rectangular area of 132 m 20 m, meeting requirements of class S3 using columns 4.5 m) Reduction of annual electricity consumption by up to 73% reduction in the number of column/luminaire sets by 25% savings on maintenance costs 5-year guarantee on LED luminaires return on investment after 6 months usage Distribution curve for MIRA LED luminaire Name MIRA LED 36 code / /3 Colour temperature 5000 K 3500 K Insulation class LED power in luminaire II 36W LED number 12 Luminous efficiency 91,5 lm/w 77,4 lm/w Total luminaire power* 41 W Luminous flux 3725 lm 3151 lm Luminaire weight Lateral surface 6,1 kg 0,029 m

5 MIZAR LED MIZAR LED park luminaire is the perfect decorative design for pedestrian ways, park and squares lighting. Its interesting structure and modern design are great solutions to illuminate urban space. Its decorative character is a wonderful complement to the place in which it will be mounted and gives it an individual atmosphere. MIZAR LED MIZAR LED is made of anodized aluminium sheet with high thermal conductivity giving it superior durability. The standard luminaire colour is a combination of two colours: Inox and green. The luminaire is available in other ROSA anodised colours on request MIZAR LED is designed to be pole top mounted on 5 to 6 m columns using the slip over mounting sleeve. Spigot entry 60 mm. The advantages of using MIZAR LED 48 compared to OPA-1 S-100W Son luminaire with lamp diffuser Auris Maxi I (external illuminated rectangular area of 140 m 20 m, meeting requirements of class S3 using columns 5 m) reduction of annual electricity consumption by up to 76% reduction in the number of column/luminaire sets by 29% savings on maintenance costs 5-year guarantee on LED luminaires return on investment after 3 months usage Distribution curve for MIZAR LED luminaire Name MIZAR LED 48 code / /3 Colour temperature 5000 K 3500 K Insulation class LED power in luminaire II 48W LED number 16 Luminous efficiency 91,2 lm/w 77,2 lm/w Total luminaire power* 54 W Luminous flux 4898 lm 4143,5 lm Luminaire weight 9,2 kg Lateral surface 0,057 m

6 OS-1 LED OS-1LED is the perfect heritage style luminaire for parks, pedestrian walk ways, precincts and squares. Classic elegance with modern LED technology produces the ideal solution to illuminate places where climate and stylish architecture meet. OS-1 LED is made of black thermo plastic reinforced with glass fibre. The luminaire is pole top mounted on 4-5 vm columns or on wall brackets with 60mm spigot entry. Analysis of OS-1 LED lighting performance allowed a reduction in the supply current to 700 Ma obtaining maximum energy savings. The OS-1 LED 36 W luminaire compared with the standard OS-1 S-70W Son achieves twice the average illuminance level a saving of 54%. The advantages of using OS-1 LED 32 compared to OS-1 S70 W Son luminaire (external illuminated rectangular area of 120 m 20 m, meeting the requirements of class S4 using columns 4 m) reduction of annual electricity consumption by up to 76% reduction in the number of column/luminaire sets by 25% savings on maintenance costs, 5-year guarantee on LED luminaires, return on investment after 27 months usage Distribution curve for OS-1 LED luminaire Name OS-1 LED 32 code / /3 Colour temperature 5000 K 3500 K Insulation class LED power in luminaire II 32 W LED number 16 Luminous efficiency 91,5 lm/w 72,0 lm/w Total luminaire power* 36 W Luminous flux 3540 lm 2593,5 lm Luminaire weight 5,2 kg Lateral surface 0,1 m

7 VEGA LED VEGA LED park luminaire is the perfect decorative lighting for pedestrian ways, lanes, park and squares. Its interesting design in connection with economic parameters is an ideal solution for urban lighting giving the place of its location a unique atmosphere. VEGA LED luminaire is made of anodized aluminium sheet of high thermal conductivity. giving it superior durability. The standard luminaire colour is a combination of two colours: Inox and black. The luminaire is available in other ROSA anodised colours on request. VEGA LED The luminaire is designed to be mounted on 5.5 to 8m columns. Spigot entry 60 mm. The luminaire has also the possibility to adjust the inclination angle in the range of +/ 15. The luminaire is available in three options: VEGA LED designed for mounting on extension arm, VEGA LED ALFA pole top mounted VEGA LED BETA pole top mounted in a centric way. ALFA Ø 506 VEGA LED ALFA The advantages of using VEGA LED 60 compared to OPA-1 S-100 W Son (external illuminated rectangular area of 140 m 20 m, meeting the requirements of class S3 using columns 5.5 m) reduction of annual electricity consumption by up to 70% reduction in the number of column/luminaire sets by 29% savings on maintenance costs, 5-year guarantee on LED luminaires, return on investment after 14 months usage BETA Ø 60 VEGA LED BETA Distribution curve for VEGA LED luminaire Name code VEGA LED 60 VEGA LED ALFA / / / /3 VEGA LED BETA / /3 Colour temperature 5000 K 3500 K 5000 K 3500 K Insulation class II II LED power in luminaire 60W 60W LED number Luminous efficiency 97,0 lm/w 82,3 lm/w 97,0 lm/w 82,3 lm/w Total luminaire power* 68 W 68 W Luminous flux 6555 lm 5545,3 lm 6555 lm 5545,3 lm Luminaire weight 10,5 kg 9,5 kg Lateral surface 0,042 m 2 0,04 m

8 COSMO LED LEDs are also used in the COSMO street lighting luminaire. The COSMO LED exceptional profile design and innovative technology are the perfect combination to illuminate streets category ME3a and lower. The luminaire is available in two versions as shown below in the chart. COSMO LED luminaire is constructed of high thermal conductive aluminium sheet. giving it superior durability. The standard luminaire colour is a combination of two colours: champagne and black. The luminaire is available in other ROSA anodised colours on request. The luminaire is designed to be mounted on 8 to 10 m columns. Spigot entry 60mm. Available in two versions: COSMO LED designed for mounting on extension arm, COSMO LED ALFA pole top mounted COSMO LED The advantages of using COSMO LED 96 compared to luminaire MAGNOLIA S-150W Son (lighting 1 km of 7 m wide road to meet the requirements of the class ME3a using 10 m columns with street lighting luminaire MAGNOLIA S-150W Son and 9 m columns with luminaire COSMO LED 96) reduction of annual electricity consumption by up to 57% reduction in the number of column/luminaire sets by 6% savings on maintenance costs 5-year guarantee on LED luminaires ALFA COSMO LED ALFA Name code COSMO LED 72 COSMO LED ALFA / / / /3 COSMO LED 96 COSMO LED ALFA / / / /3 Colour temperature 5000 K 3500 K 5000 K 3500 K Insulation class II II LED power in luminaire 72W 96 W LED number Luminous efficiency 100,5 lm/w 83,2 lm/w 100,5 lm/w 84,3 lm/w Total luminaire power* 80 W 108 W Luminous flux 7866 lm 6654,3 lm lm 8872,4 lm Luminaire weight 11,5 kg 11,5 kg Lateral surface 0,085 m 2 0,085 m

9 MAGNOLIA LED LEDs are also used in the MAGNOLIA street lighting luminaire. The Magnolia LED- designed to illuminate streets category ME3a and lower is a proven luminaire which combined with LED technology creates an excellent solution for urban space lighting. MAGNOLIA LED is made of aluminium cast. It is painted using polyester powder paints: body RAL 9006 grey, cover Silver Renoir. There is a possibility of painting in other RAL colours. The luminaire is designed to be mounted on 8 to 10 m columns or on an extension arm. Spigot entry 60 mm. The luminaire has also the possibility to adjust the inclination angle in the range from 5 to 20. There is also a possibility of fully smooth regulation from 0o to 90o by adding extra positioned holes. Distribution curve for MAGNOLIA LED luminaire The advantages of using MAGNOLIA LED 96 compared to luminaire MAGNOLIA S-150W Son (lighting 1 km of 7 m wide road to meet the requirements of the class ME3a using 10 m columns with street lighting luminaire MAGNOLIA S-150W Son and 9m columns with luminaire MAGNOLIA LED 96 reduction of annual electricity consumption by up to 57% reduction in the number of column/luminaire sets by 6% savings on maintenance costs 5-year guarantee on LED luminaires Name MAGNOLIA LED 60 MAGNOLIA LED 72 MAGNOLIA LED 84 MAGNOLIA LED 96 code / / / / / / / /3 Colour temperature 5000 K 3500 K 5000 K 3500 K 5000 K 3500 K 5000 K 3500 K Insulation class II II II II LED power in luminaire 60 W 72 W 84 W 96 W LED number Luminous efficiency 102 lm/w 88,3 lm/w 102 lm/w 88,5 lm/w 102 lm/w 88,2 lm/w 102 lm/w 88,6 lm/w Total luminaire power* 66 W 79 W 92,5 W 108 W Luminous flux 6871,8 lm 5825 lm 8246 lm 6990 lm 9620,6 lm 8155 lm lm 9320 lm Luminaire weight 11 kg 11 kg 11 kg 11 kg Lateral surface 0,1 m 2 0,1 m 2 0,1 m 2 0,1 m 2 total power taking into account losses on driver 16 17

10 URSA I LED URSA I LED This street lighting luminaire perfectly exposes light and is designed to illuminate streets category ME3a and lower. It is available in 3 power versions according to the table presented below and can be widely used. Mounting options can create interesting arrangements in urban space. URSA I LED is made in corrosion free anodized aluminium sheet. giving it superior durability. The standard luminaire colour is a combination of two colours: olive and black. The luminaire is available in other ROSA anodised colours on request The luminaire is designed to be mounted on 6 to 8 m columns. Spigot entry 60 mm. The luminaire has also the possibility to adjust the inclination angle in the range of +/ 15. and is available in two options: URSA I LED designed for mounting on extension arm, URSA I LED ALFA pole top mounted. URSA I LED ALFA Distribution curve for URSA I LED luminaire The advantages of using URSA I LED 60 compared to luminaire MAGNOLIA S-100W Son (lighting 1 km of 7m wide road to meet the requirements of the class ME4a using 9 m high columns with street lighting luminaire MAGNOLIA S-100W Son and 7.5 m columns with luminaire URSA I LED 60) reduction of annual electricity consumption by up to 55% savings on maintenance costs, 5-year guarantee on LED luminaires, ALFA Name code URSA I LED 48 URSA I LED ALFA / / / /3 URSA I LED 60 URSA I LED ALFA / / / /3 URSA I LED 72 URSA I LED ALFA / / / /3 Colour temperature 5000 K 3500 K 5000 K 3500 K 5000 K 3500 K Insulation class II II II LED power in luminaire 48 W 60 W 72 W LED number Luminous efficiency 100,5 lm/w 88 lm/w 100,5 lm/w 82,3 lm/w 100,5 lm/w 83,2 lm/w Total luminaire power* 51 W 68 W 80 W Luminous flux 5244 lm 4436,2 lm 6555 lm 5545,3 lm 7866 lm 6654,3 lm Luminaire weight 6,0 kg 7,0 kg 8,0 kg Lateral surface 0,04 m 2 0,043 m 2 0,045 m 2 A luminaire length 508 mm 589 mm 670 mm 18 19

11 URSA II LED ALFA URSA II LED URSA II LED ALFA Distribution curve for URSA II LED luminaire This street lighting luminaire in modern, harmonic form perfectly exposes light and is designed to illuminate streets category ME3a and lower. It is available in 4 power versions according to the table presented below and can be widely used. Mounting options allow to create interesting arrangements in urban space. URSA II LED is made in corrosion free anodized aluminium sheet. giving it superior durability. The standard luminaire colour is a combination of two colours: grey and black. The luminaire is available in other ROSA anodised colours on request Luminaire is designed to be mounted on 8 to 11 m columns. Spigot entry 60 mm. The luminaire has also the possibility to adjust the inclination angle in the range of +/ 15. The luminaire is available in two options: URSA II LED designed for mounting on extension arm, URSA II LED ALFA pole top mounted. The advantages of using URSA II LED compared to luminaire MAGNOLIA S-250W Son (lighting 1 km of 7 m wide road to meet the requirements of the class ME4a using 11 m columns) reduction of annual electricity consumption by up to 67% savings on maintenance costs 5-year guarantee on LED luminaires Depending on the distribution of columns URSA II LED 144 achieves the lighting parameters specified by the standard for Class ME2. It can also be used for installations requiring increased spacing between the columns - to meet the requirements of class ME3a using 11 m columns on a 7 m wide road at 40 m spacings. Name code URSA II LED 84 URSA II LED ALFA / / / /3 URSA II LED 96 URSA II LED ALFA / / / /3 URSA II LED 120 URSA II LED ALFA / / / /3 URSA II LED 144 URSA II LED ALFA / / / /3 Colour temperature 5000 K K 5000 K 3500 K 5000 K 3500 K 5000 K 3500 K Insulation class II II II II LED power in luminaire 84 W 96 W 120 W 144 W LED number Luminous efficiency 100,5 lm/w 83,8 lm/w 100,5 lm/w 84,3 lm/w 100,5 lm/w 85,1 lm/w 100,5 lm/w 85,5 lm/w Total luminaire power* 93 W 108 W 131 W 156 W Luminous flux 9177 lm 7763,4 lm lm 8872,4 lm lm 11090,6 lm lm 13308,7 lm Luminaire weight 8,5 kg 9,0 kg 10,0 kg 11,0 kg Lateral surface 0,047 m2 0,05 m2 0,055 m2 0,06 m2 A luminaire length 710 mm 751 mm 832 mm 917 mm * Moc całkowita uwzględniająca straty na zasilaczu 20 21

12 ANDROMEDA LED Having the perfect modern form exposing light, ANDROMEDA street lighting luminaire is designed to illuminate streets category ME3a and lower. Thanks to 4 power options presented in the table below, it is an excellent tool for energy-efficient urban space lighting. ANDROMEDA LED is made in corrosion free anodized aluminium sheet. giving it superior durability. The standard luminaire colour is a combination of two colours: champagne and black. The luminaire is available in other ROSA anodised colours on request The luminaire is designed to be mounted on 8 to 11 m columns. Spigot entry 60 mm. The luminaire has also the possibility to adjust the inclination angle in the range of +/ 15. Distribution curve for ANDROMEDA LED luminaire The advantages of using ANDROMEDA LED 144 compared to luminaire MAGNOLIA S-250W Son (lighting 1 km of 7 m wide road to meet the requirements of the class ME4a using 11 m columns) reduction of annual electricity consumption by up to 67% savings on maintenance costs, 5-year guarantee on LED luminaires Depending on the distribution of columns ANDROMEDA LED 144 achieves the lighting parameters specified by the standard for Class ME2. It can also be used for installations requiring increased spacing between the columns - to meet the requirements of class ME3a using 11 m columns on a 7 m wide road at 40 m spacings. Name ANDROMEDA LED 72 ANDROMEDA LED 96 ANDROMEDA LED 120 ANDROMEDA LED 144 code / / / / / / / /3 Colour temperature 5000 K 3500 K 5000 K 3500 K 5000 K 3500 K 5000 K 3500 K Insulation class II II II II LED power in luminaire 72W 96W 120W 144W LED number Luminous efficiency 100,0 lm/w 83,2 lm/w 100,0 lm/w 84,3 lm/w 100,5 lm/w 85,1 lm/w 101,0 lm/w 85,5 lm/w Total luminaire power* 80 W 108 W 131 W 156 W Luminous flux 7866 lm 6654,3 lm lm 8872,4 lm lm 11090,6 lm lm 13308,7 lm Luminaire weight 9,0 kg 10,0 kg 11,0 kg 12,0 kg Lateral surface 0,05 m 2 0,056 m 2 0,062 m 2 0,068 m 2 A luminaire length 720 mm 851 mm 932 mm 1013 mm 22 23

13 ARTEMIS LED ARTEMIS LED floodlight is the perfect tool to illuminate architectural elements underlining and emphasizing objects details. Well suited both for sports facilities lighting and large areas. ARTEMIS LED is made in corrosion free anodized aluminium sheet. giving it superior durability. The standard floodlight colour is a combination of two colours: Inox and black. The floodlight is available in other ROSA anodised colours on request The floodlight is designed to be post top mounted. Spigot entry 60 mm. The luminaire has also the possibility to adjust the inclination angle in the range from 0 to 180. Savings from use of ARTEMIS LED floodlight Low maintenance costs long LED lifetime and floodlight durability The possibility of night time dimming produces energy savings of approximately 30% Distribution curve for ARTEMIS LED floodlight Name ARTEMIS LED 144 code / /3 Colour temperature 5000 K 3500 K Insulation class LED power in floodlight II 144W LED number 48 Luminous efficiency 101,0 lm/w 85,5 lm/w Total floodlight power* 156 W Luminous flux lm 13308,7 lm Floodlight weight Lateral surface 11,0 kg depends on angular setting 24 25

14 LED These decorative columns and bollards for lighting pedestrian walk ways and squares have become an established feature of our range. Now available in LED versions they combine aesthetics and ecology with a wide range of LED bollards and LED columns in different wattages as shown below. Karin LED series is made of anodized aluminium cylindrical pipe of high thermal conductivity. Most of the products from these series are anodized which ensures high protection and excellent long life and is available in a variety of colour options. Only 6000 LED 90 is powder painted in RAL colours. Diffusers are available in UV resistant polycarbonate (PCUV) or polymethacrylate (PMMA) D LED cover 2. LED module 3. lamp- diffuser 4. frame 5. intermediate ring 6. driver 7. Control gear frame with electrical connector 8. Aluminium tubular body 150 2,5 mm 9. insulation insert 10. base plate Name 450 LED LED LED LED 15 Code 45200/6/C 45200/3/C 45210/6/C 45210/3/C 45220/6/C 45220/3/C 45230/6/C 45230/3/C Colour temperature 5000 K 3500 K 5000 K 3500 K 5000 K 3500 K 5000 K 3500 K Insulation class I I I I LED power 15 W 15W 15W 15 W LED number Luminous efficiency 90,0 lm/w 84,6 lm/w 90,0 lm/w 84,6 lm/w 90,0 lm/w 84,6 lm/w 90,0 lm/w 84,6 lm/w Total power* 17 W 17 W 17 W 17 W Luminous flux 1650 lm 1395,8 lm 1650 lm 1395,8 lm 1650 lm 1395,8 lm 1650 lm 1395,8 lm Height 450 mm 600 mm 900 mm 1200 mm Diameter D 150 mm 150 mm 150 mm 150 mm Diffuser material PCUV or PMMA PCUV or PMMA PCUV or PMMA PCUV or PMMA Diffuser colour Translucent opal Translucent opal Translucent opal Translucent opal 7 LED cover 2. LED module 3. lamp- diffuser 4. frame 5. driver 6. Aluminium tubular body 150 2,5 mm 7. base plate Name 2400 LED LED LED LED 90 Code 45240/6/C 45240/3/C 45250/6/C 45250/3/C 45260/6/C 45260/3/C 45270/6/M 45270/3/M Colour temperature 5000 K 3500 K 5000 K 3500 K 5000 K 3500 K 5000 K 3500 K Insulation class I I I I LED power 42 W 51 W 60 W 90 W LED number Luminous efficiency 96,0 lm/w 81 lm/w 97,0 lm/w 82,3 lm/w 99,0 lm/w 83,8 lm/w 99,0 lm/w 83,8 lm/w Total power* 46 W 56 W 64 W 95 W Luminous flux 4620 lm 3920 lm 5610 lm 4760 lm 6600 lm 5600 lm 9500 lm 8400 lm Height 2400 mm 3600 mm 4800 mm 6000 mm Diameter D 150 mm 180 mm 200 mm 300 mm Base plate dimensions mm mm mm mm Diffuser material PCUV or PMMA PCUV or PMMA PCUV or PMMA PMMA Diffuser colour Translucent opal Translucent opal Translucent opal Translucent opal 450 LED 600 LED 900 LED 1200 LED 2400 LED 3600 LED 4800 LED 6000 LED 26 27

15 The project co-financed by the European Union from the European Regional Development Fund within the framework of the Regional Operational Programme of the Silesia Voivodeship for the years Zakład Produkcji Sprzętu Oświetleniowego ROSA Stanisław Rosa Strefowa 1 Street, Tychy Commercial Director: , dyrekcja@rosa.pl Sales Department: , sprzedaz@rosa.pl Marketing Department: , marketing@rosa.pl