TU-10/TA-10/TUS-10 Installation Guide and Connections

Size: px
Start display at page:

Download "TU-10/TA-10/TUS-10 Installation Guide and Connections"

Transcription

1 TU-10/TA-10/TUS-10 Installation Guide and Connections Version 1.2 Date 01.03

2 About this Guide This guide is a simple to follow instruction and Installation manual detailing the connections and wiring methods for the TU-10 Clocking Terminal.

3 Table of Contents 1. Notice about Installing 2. Device interface and connections 2.1 Communication 2.2 External Connections 2.3 Connecting a Printer 3. Test and Examine 4. USB and Reset Functions 5. Troubleshooting 6. Notes

4 Notice about Installing Before installation process please make sure you have all the parts necessary and the area you wish to install the device is clean and suitable for mounting. The device is suitable for indoor use only. The device is manufactured in strict quality controlled factory s and follows all USA and EU criteria. We recommend you read the following document to ensure safe and trouble free installation of the product. Please make sure the device is powered down before installation begins and a suitable power source (240v) socket is located near where the device is to be mounted. Only use the power supply and mounting bracket that is supplied with the device failure to do so could result in damaging the equipment. Cable entry to the device is located at the rear with knock-out sections in the case to allow top or bottom entry for cable wiring. Using pliers the knock-out can be removed. A suitable mounting height for the device is meters from the ground. Install all cabling before mounting the device. Connect the communication,power and any other external wiring into the connectors located on the device before switching the power on. Once power is switched on the device will go through a boot up sequence before diaplying the time. If required the device has a built in test function in which will test all the built in features of the clock. To use the Auto test Press the menu button and select Auto Test using the cursor keys. Please check all wiring failure to do could result in damaging the device.

5 1 Device Interface and connections Power Supply: Use to connect the power supply Ethernet Port: Connect the device to a suitable network connection or direct to a PC using a crossover cable. Wiring Terminals: Connect an External Bell/Sounder or an RS232 Printer. Note: the External Bell sounder is only rated at 12v switching if a higher voltage sounder is required then an external relay will need to be used. Ethernet and RS232 connection are subject to industry standards on distance and cabling specifications.

6 Communication 2 Standard wiring configuration for computer networks and for connecting more than one device. Connecting the clock using a crossover cable. Note: The crossover cable is a special cable allowing a computer to connect to the device and the device only. The IP address of the PC will need to be manually set for the crossover cable to work. In the figure 3.1 the IP address of the clock is the PC address has been manually set to

7 External Connections 2.1 Connecting an external bell or sounder. The device is equipped with a built in low voltage relay capable of switching a 12v external power supply to sound an external sounder/bell. To set-up the times for switching the bell use the menu system of the clock and select from the clock menu: System Bell Select the time from the list and and press enter. Sounder set-up screen: Time Bell To Sound 'Times' Duration of Bell 'State' Activate Relay Connecting the Bell/Sounder: Figure 3.6 shows the connections for an external bell using a 12v external power supply.

8 Connecting a Printer 2.2 Using the external RS232 port you can connect a printer to the device so that every clocking is outputted to the printer. This is useful for on-site attendance or roll call. Only 3 terminals are used for connecting the printer to the device. TXD RXD SGND GND can be connected to the shield ground of the D type connector if required.

9 Test and Examine 2.3 After all system Installation is Finished make a test and examine wiring prior to powering up. Power on the device the green LED should light and the boot up sequence has begun. In a few seconds the display should light and then time appear. To test the device use the Auto test function. Enter Menu of the clock then select the Auto Test Function.

10 3 USB and Reset Function. The device is fitted with a USB port located under a rubber cover on the side of the unit. This USB port is for connecting a memory stick to Upload/Download employee data. Upload Into the clock from the Memory Stick Download From the clock into the memory stick. Reset Under the rubber flap on the side of the unit a reset button is located using a sharp tool (less the 2mm) insert the tool into the hole and press the clock should now restart. This process does not delete data or reset parameters only restart the device.

11 Trouble Shooting. 4 Problem Cause & Fix Power LED is OFF no Display No power supply voltage check power supply connected correctly and switched on. Unable to connect to PC Software Will not enter allow menu to be displayed. Time showing 00:00 after restart Buzzer not working External bell not sounding Check TCP/IP connection, Check Correct IP address are being used. Check the security setting in the device has not been changed (should be set to 0) Administrator enabled in clock. Keypad faulty Internal clock battery flat. Return to reseller for repair. Check volume of buzzer in the menu. Check that beep is switched on. Check connections and check times in menu stup. Check the 'state' is set to 'on'

12 Notes: 5

TABLE OF CONTENTS 1.1 CONNECT TIME CLOCK TO PC 2 1.2 VIA USB CABLE CONNECTION & TCP/IP 3-6 1.3 VIA TCP/IP NETWORK CONNECTION ON TIMECLOCK 7-8

TABLE OF CONTENTS 1.1 CONNECT TIME CLOCK TO PC 2 1.2 VIA USB CABLE CONNECTION & TCP/IP 3-6 1.3 VIA TCP/IP NETWORK CONNECTION ON TIMECLOCK 7-8 TABLE OF CONTENTS CHAPTER 1 ESTABLISHING A CONNECTION TO TIME CLOCK 1.1 CONNECT TIME CLOCK TO PC 2 1.2 VIA USB CABLE CONNECTION & TCP/IP 3-6 1.3 VIA TCP/IP NETWORK CONNECTION ON TIMECLOCK 7-8 CHAPTER 2

More information

Digital I/O: OUTPUT: Basic, Count, Count+, Smart+

Digital I/O: OUTPUT: Basic, Count, Count+, Smart+ Digital I/O: OUTPUT: Basic, Count, Count+, Smart+ The digital I/O option port in the 4-Series provides us with 4 optically isolated inputs and 4 optically isolated outputs. All power is supplied externally.

More information

User Manual. mtv-100 Startup Guide

User Manual. mtv-100 Startup Guide User Manual mtv-100 Startup Guide 0 Table of Contents 1 Specification... 1 1.1 Dimensions... 2 1.2 Connector pin designations... 3 1.3 USB Host port and SD card slot... 3 1.4 Ethernet port... 3 1.5 DIP

More information

VBOX-Plus Configuration Tool

VBOX-Plus Configuration Tool Version 1.0 October 2012 VBOX-Plus Configuration Tool Table of Contents System Requirements Program Installation Connecting to the VBOX-Plus Gateway System Configuration Resetting to Factory Default Registering

More information

MAKING MODERN LIVING POSSIBLE. AK-SC255 On-Site Installation Guide DANFOSS ELECTRONIC CONTROLS & SENSORS

MAKING MODERN LIVING POSSIBLE. AK-SC255 On-Site Installation Guide DANFOSS ELECTRONIC CONTROLS & SENSORS MAKING MODERN LIVING POSSIBLE AK-SC255 On-Site Installation Guide DANFOSS ELECTRONIC CONTROLS & SENSORS How to Use This Guide Read this Guide completely as you install and start up your new AK-SC 255 controller.

More information

Section 5: Installing the Print Driver

Section 5: Installing the Print Driver Section 5: Installing the Print Driver In This Section Print Driver Installation for USB Connection Using the Ethernet Connection and a Crossover Cable Print Driver: The Epilog print driver is the software

More information

User Manual. cmt-svr Startup Guide

User Manual. cmt-svr Startup Guide User Manual cmt-svr Startup Guide Table of Contents Chapter 1 Overview... 1 1.1 Specification... 1 1.2 Dimensions... 2 1.3 Connector pin designations... 3 1.4 USB host port and SD card slot... 3 1.5 Ethernet

More information

HT580 User Reference Guide. Version 1.0

HT580 User Reference Guide. Version 1.0 Version 1.0 NOTICE 1. Li-Ion Battery Pack The HT580 Portable Terminal and the Li-Ion Battery Pack are packaged separately. You will have to install the Battery Pack when you receive your terminal. Please

More information

USING THE MODEL V800 VELOCITY CLOCK

USING THE MODEL V800 VELOCITY CLOCK USING THE MODEL V800 VELOCITY CLOCK Velocity Clocks are advanced clocks with many options and features. They can be used to restrict employee punching, allowing employees to punch at the clock during their

More information

To perform Ethernet setup and communication verification, first perform RS232 setup and communication verification:

To perform Ethernet setup and communication verification, first perform RS232 setup and communication verification: PURPOSE Verify that communication is established for the following products programming option (488.2 compliant, SCPI only): DCS - M9C & DCS M130, DLM M9E & DLM-M9G & DLM M130, DHP - M9D, P series, SG,

More information

F7_F707_F708 Installation Instruction V1.0 F7_F707_F708. Access Control Terminal. Installation Instructions

F7_F707_F708 Installation Instruction V1.0 F7_F707_F708. Access Control Terminal. Installation Instructions F7_F707_F708 Access Control Terminal Installation Instructions Revised May 2008 About this Guide This guide provides installation instructions only. For information regarding actual operation and configuration

More information

How do I configure the wireless printer using a USB or Ethernet cable and install the printer driver in Windows?

How do I configure the wireless printer using a USB or Ethernet cable and install the printer driver in Windows? How do I configure the wireless printer using a USB or Ethernet cable and install the printer driver in Windows? STEP I: Gather the wireless network settings of your wireless access point or wireless router

More information

AC-115 Compact Networked Single Door Controller. Installation and User Manual

AC-115 Compact Networked Single Door Controller. Installation and User Manual AC-115 Compact Networked Single Controller Installation and User Manual December 2007 Table of Contents Table of Contents 1. Introduction...5 1.1 Key Features... 6 1.2 Technical Specifications... 7 2.

More information

DPM-3232. Digital DC Power Meter with Data logging capability. User Manual

DPM-3232. Digital DC Power Meter with Data logging capability. User Manual DPM-3232 Digital DC Power Meter with Data logging capability User Manual Introduction As a digital DC power meter, it measures the real time DC Voltage (5-60V), DC Current (0-30 A), Watt, and it also displays

More information

Series 2000 3G Modem / Router Quick Start Guide

Series 2000 3G Modem / Router Quick Start Guide Series 2000 3G Modem / Router Quick Start Guide Document Number: 0013-001-000170 () Documentation Control Generation Date: March 9, 2010 Cybertec Pty Limited All rights Reserved. No part of this publication

More information

TABLE OF CONTENTS INTRODUCTION 1.2 CONNECT TIME CLOCK TO PC 2 1.2.A..VIA USB CABLE CONNECTION 2-5 1.2.B... VIA TCP/IP NETWORK CONNECTION 2-6

TABLE OF CONTENTS INTRODUCTION 1.2 CONNECT TIME CLOCK TO PC 2 1.2.A..VIA USB CABLE CONNECTION 2-5 1.2.B... VIA TCP/IP NETWORK CONNECTION 2-6 1 TABLE OF CONTENTS INTRODUCTION CHAPTER 1 ESTABLISHING A CONNECTION TO TIME CLOCK 1.1 INSTALLATION OF SOFTWARE 1.2 CONNECT TIME CLOCK TO PC 2 1.2.A..VIA USB CABLE CONNECTION 2-5 1.2.B... VIA TCP/IP NETWORK

More information

PLC training panel (Twido version)

PLC training panel (Twido version) PLC training panel (Twido version) User manual Name School of Trades Produced by: GJR October 2012 Colour leaves: 9 BW leaves: 2 Cover colour: White Cover image: G.J.Rogerson Acknowledgments: Much of the

More information

V2.0 Attendance System Hardware Suite Guide Instructions Manual

V2.0 Attendance System Hardware Suite Guide Instructions Manual CONTENTS TA920 V2.0 Attendance System Hardware Suite Guide Instructions Manual Chapter One - Introduction 1.1 Communication Port 5 1.2 Power Source Control. 5 1.3 Attendance Users. 6 1.4 Registering Ways..

More information

EtherNet-RS232/485. London Electronics Limited. Ethernet to RS232 or RS485 data converter. Connection details and general information

EtherNet-RS232/485. London Electronics Limited. Ethernet to RS232 or RS485 data converter. Connection details and general information London Electronics Limited Warren Court, Chicksands, Shefford, Bedfordshire SG17 5QB Tel +44(0)1462-850967 Fax +44(0)1462-850968 www.london-electronics.com help@london-electronics.com Ethernet to RS232

More information

TIME BOX BIOMETRIC TECHNICAL INSTRUCTIONS AND QUICK START GUIDE IT IS RECOMMENDED TO READ THIS MANUAL BEFORE OPERATING THE SYSTEM

TIME BOX BIOMETRIC TECHNICAL INSTRUCTIONS AND QUICK START GUIDE IT IS RECOMMENDED TO READ THIS MANUAL BEFORE OPERATING THE SYSTEM TIME BOX BIOMETRIC TECHNICAL INSTRUCTIONS AND QUICK START GUIDE IT IS RECOMMENDED TO READ THIS MANUAL BEFORE OPERATING THE SYSTEM BODET Software B.P. 402 Boulevard du Cormier F-49302 CHOLET Cedex www.bodet.com

More information

UPS Monitoring and Management Software

UPS Monitoring and Management Software UPS Monitoring and Management Software LEN.MAN.SOF.141 Rev.1.00/2008 User s Guide: Easy-Mon X 1. Configuration Before Easy-Mon X software can display the electrical data of LEONICS UPS, user has to configure

More information

IP65 Rated Outdoor Monitor User s Manual

IP65 Rated Outdoor Monitor User s Manual IP65 Rated Outdoor Monitor User s Manual Manual Version OWTA1.0 Safety Instructions Please handle with care so as to not damage the LCD panel. The holes or openings on the display are designed for ventilation.

More information

Secure Ethernet Gateway SEG-1 and SEG-M for IEI Access Systems Installation Manual

Secure Ethernet Gateway SEG-1 and SEG-M for IEI Access Systems Installation Manual Secure Ethernet Gateway SEG-1 and SEG-M for IEI Access Systems Installation Manual Section 1: Introduction SECURITY WARNING: New SEG's shipped after April 2008 will have Telnet setup option enabled by

More information

Fingerprint Time Attendance Hardware User Manual

Fingerprint Time Attendance Hardware User Manual Fingerprint Time Attendance Hardware User Manual CONTENTS 1. Start Screen 1 2. User Management 1 2.1User Registration 1 2.2DeleteRegistration 2 3. Equipment Setting 2 3.1Basic Setting 2 3.2Advanced Setting

More information

RS232C < - > RS485 CONVERTER S MANUAL. Model: LD15U. Phone: 91-79-4002 4896 / 97 / 98 (M) 0-98253-50221 www.interfaceproducts.info

RS232C < - > RS485 CONVERTER S MANUAL. Model: LD15U. Phone: 91-79-4002 4896 / 97 / 98 (M) 0-98253-50221 www.interfaceproducts.info RS232C < - > RS485 CONVERTER S MANUAL Model: LD15U INTRODUCTION Milestone s model LD-15U is a RS232 to RS 485 converter is designed for highspeed data transmission between computer system and or peripherals

More information

EMIC/MBA Ethernet M-Bus Metering Interface Controller

EMIC/MBA Ethernet M-Bus Metering Interface Controller /MBA Ethernet M-Bus Metering Interface Controller Important: Retain these instructions Contents 1 Unpacking...1 2 Storing...1 3 Installation...1 3.1 Installation - Mounting...1 3.2 Installation - Configuring...5

More information

MFC7840W Windows Network Connection Repair Instructions

MFC7840W Windows Network Connection Repair Instructions Difficulty printing from your PC can occur for various reasons. The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine

More information

Brady IP Printer Installation Instructions

Brady IP Printer Installation Instructions Brady IP Printer Installation Instructions Ensure the following are available before commencing installation: The IP Printer and accessories (Printer, power cable, Product CD including Windows printer

More information

User Guide. Temperature and Humidity Datalogger. Model 42280

User Guide. Temperature and Humidity Datalogger. Model 42280 User Guide Temperature and Humidity Datalogger Model 42280 Introduction Congratulations on your purchase of the Extech 42280 Thermometer and Relative Humidity Datalogger. The 42280 is a wall-mount, tripod

More information

QSE-CI-NWK-E Control Interface

QSE-CI-NWK-E Control Interface QSE-CI-NWK-E Control Interface 369373e 1 04.05.16 The QSE-CI-NWK-E is a versatile integration access point for Lutron QS-based systems. Through either RS232 or TCP / IP over Ethernet, third-party devices

More information

Honeywell Internet Connection Module

Honeywell Internet Connection Module Honeywell Internet Connection Module Setup Guide Version 1.0 - Page 1 of 18 - ICM Setup Guide Technical Support Setup - Guide Table of Contents Introduction... 3 Network Setup and Configuration... 4 Setting

More information

Option nv, Gaston Geenslaan 14, B-3001 Leuven Tel +32 16 317 411 Fax +32 16 207 164 http://www.option.com Page 1 of 14

Option nv, Gaston Geenslaan 14, B-3001 Leuven Tel +32 16 317 411 Fax +32 16 207 164 http://www.option.com Page 1 of 14 Page 1 of 14 ! " #!"#$ % &&' Page 2 of 14 1 INTRODUCTION One of the highly desirable features of the GlobeSurfer III device is the ability to network together Printers and External Hard Disk drives (aka

More information

GV-Data Capture V3 Series User's Manual

GV-Data Capture V3 Series User's Manual GV-Data Capture V3 Series User's Manual Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. 2006 GeoVision, Inc. All rights

More information

5-port / 8-port 10/100BaseTX Industrial Ethernet Switch User Manual

5-port / 8-port 10/100BaseTX Industrial Ethernet Switch User Manual 5-port / 8-port 10/100BaseTX Industrial Ethernet Switch User Manual Content Overview... 1 Introduction... 1 Features... 3 Packing List... 4 Safety Precaution... 4 Hardware Description... 5 Front Panel...

More information

Using IDENT M System T with Modbus/TCP

Using IDENT M System T with Modbus/TCP Using IDENT M System T with Modbus/TCP Introduction The Pepperl+Fuchs IDENT M System T consists of two models MTT3000-F180-B12- V45-MON, which is a read only unit and the MTT6000-F120-B12-V45 which is

More information

How To Set up and Configure the WNA-100 Wireless Network Adapter

How To Set up and Configure the WNA-100 Wireless Network Adapter How To Set up and Configure the WNA-100 Wireless Network Adapter Section 1: Set up and Connect the Adapter to a Computer, Then Configure the Computer to Communicate With the Adapter Before the adapter

More information

ABUS WIRELESS ALARM SYSTEM

ABUS WIRELESS ALARM SYSTEM ABUS WIRELESS ALARM SYSTEM These installation instructions are published by Security-Center GmbH & Co. KG, Linker Kreuthweg 5, D-86444 Affing/Mühlhausen. All rights including translation reserved. Reproductions

More information

QUICK INSTALLATION GUIDE

QUICK INSTALLATION GUIDE QUICK INSTALLATION GUIDE (v. 1.1) WARNING: This is a class A product. In a domestic environment this product may cause radio interference

More information

Wireless Network Setup Guide NPD EN

Wireless Network Setup Guide NPD EN Wireless Network Setup Guide NPD4759-00 EN Checking Your Network Confirm your computer s network settings, and then choose what to do next. Follow the instructions for the environment in which your network

More information

Daker DK 1, 2, 3 kva. Manuel d installation Installation manual. Part. LE05334AC-07/13-01 GF

Daker DK 1, 2, 3 kva. Manuel d installation Installation manual. Part. LE05334AC-07/13-01 GF Daker DK 1, 2, 3 kva Manuel d installation Installation manual Part. LE05334AC-07/13-01 GF Daker DK 1, 2, 3 kva Index 1 Introduction 24 2 Conditions of use 24 3 LCD Panel 25 4 Installation 28 5 UPS communicator

More information

B890 LTE Wireless Gateway Quick Start

B890 LTE Wireless Gateway Quick Start B890 LTE Wireless Gateway Quick Start HUAWEI TECHNOLOGIES CO., LTD. Figures in this guide are only for your reference. For details about a particular model, contact your service provider. Before purchasing

More information

RX-6 Six In - One Out All in One Receive Antenna Switch Local and Remote Control System RX6ACI User Manual Version 2.1

RX-6 Six In - One Out All in One Receive Antenna Switch Local and Remote Control System RX6ACI User Manual Version 2.1 Universal Device Control Systems www.udcsys.com RX-6 Six In - One Out All in One Receive Antenna Switch Local and Remote Control System RX6ACI User Manual Version 2.1 May, 2014 Universal Device Control

More information

CNC File Transfer Box. Connecting the CNC File Transfer. CNC Transfer Program

CNC File Transfer Box. Connecting the CNC File Transfer. CNC Transfer Program CNC File Transfer Box The CNC File Transfer connects a serial CNC device to the network so files can be easily transferred from a computer to the CNC equipment. Any computer on the network can transfer

More information

Section 5: Connecting the Laser to Your Computer

Section 5: Connecting the Laser to Your Computer Section 5: Connecting the Laser to Your Computer In This Section Connecting the Laser to your Computer USB Port Ethernet Port Connecting the Laser to Your Computer All Epilog systems are designed to be

More information

Ins-60005-GD-US. Master Controller Installation Guide

Ins-60005-GD-US. Master Controller Installation Guide Ins-60005-GD-US Master Controller Installation Guide Mounting This housing should be fixed to the surface with suitable fasteners; screws and wall plugs are provided for this in the fitting kit. Also provided

More information

Electronics Ltd. Presenting. Power, Intelligence... with a sense of feeling

Electronics Ltd. Presenting. Power, Intelligence... with a sense of feeling Electronics Ltd Presenting Power, Intelligence... with a sense of feeling By Appointment to Her Majesty The Queen Supplier of Fire Detection Equipment Kentec Electronics Ltd. Dartford Plug in slots K772

More information

2M IR Mini Dome Quick Installation Guide

2M IR Mini Dome Quick Installation Guide 2M IR Mini Dome 2M IR Mini Dome Quick Installation Guide Please follow the installation steps below to set up 2M IR Mini Dome IP Camera. Check the package contents against the list below. See P.1 Physical

More information

TE100-P21/TEW-P21G Windows 7 Installation Instruction

TE100-P21/TEW-P21G Windows 7 Installation Instruction Hardware Installation TE100-P21/TEW-P21G Windows 7 Installation Instruction 1. Go to http://www.trendnet.com/downloads/ to download the Windows 7 Utility. Save the file to your desktop. 2. Right click

More information

install and configure the GPI option kit for 4 Series

install and configure the GPI option kit for 4 Series How to XTA Electronics Ltd. The Design House Vale Business Park Worcester Road Stourport-on-Severn Worcs. DY13 9BZ. England Tel: 01299 879977 (Intl. +44 1299 879977) Fax: 01299 879969 (Intl. +44 1299 879969)

More information

Printer Driver Installation Guide

Printer Driver Installation Guide Fujitsu Dot Matrix Printer DL Series Printer Driver Installation Guide - Windows 7 - Windows Server 2008 R2 Rev.01: April 12, 2010 IMPORTANT NOTE TO USERS For Windows 7 / Windows Server 2008 R2, install

More information

Installation and user manual for the FX range of fire panels. 1, 2, 4 and 8 zone panels

Installation and user manual for the FX range of fire panels. 1, 2, 4 and 8 zone panels Installation and user manual for the FX range of fire panels 1, 2, 4 and 8 zone panels Contents Panel installation 3 Panel connections 3 Wiring connection drawings 4 Panel facilities 6 Installation check

More information

Power Switch-8. Master. Slave. User's Guide. Power Management

Power Switch-8. Master. Slave. User's Guide. Power Management Power Switch-8 Power Management Master Slave User's Guide V.02/2004 Power Switch-8 Power Switch-8 is a couple of power control units made of a Master named Power Switch Master and a slave named Power Switch

More information

FIREDEX 2200. Conventional Fire Panels

FIREDEX 2200. Conventional Fire Panels 68 Flexible, high specification system Choice of 1, 2, 4 or 8 zones Simple one-shot auto-reset user test facility Approved to EN54 Maintenance free poly switch circuit protection, with auto reset Class

More information

Check that you have all of the following items. If anything is missing, contact your supplier. SRS stick reader (the stick reader)

Check that you have all of the following items. If anything is missing, contact your supplier. SRS stick reader (the stick reader) 1 Unpack the box Check that you have all of the following items. If anything is missing, contact your supplier. SRS stick reader (the stick reader) USB flash drive/cd Contains Data Link software and reference

More information

Web Page Installation Guide. WiFi RS232 Adapter

Web Page Installation Guide. WiFi RS232 Adapter Web Page Installation Guide WiFi RS232 Adapter 1 Introduction This guide will help you install and configure the WIFI ADAPTER for the first time use. It describes how to configure the required WiFi and

More information

ADSL Router Quick Installation Guide Revised, edited and illustrated by Neo

ADSL Router Quick Installation Guide Revised, edited and illustrated by Neo ADSL Router Quick Installation Guide Revised, edited and illustrated by Neo A typical set up for a router PCs can be connected to the router via USB or Ethernet. If you wish to use a telephone with the

More information

RigExpert. Antenna Analyzers. Software Manual

RigExpert. Antenna Analyzers. Software Manual RigExpert Antenna Analyzers Software Manual Table of contents 1. Connecting RigExpert analyzers to the computer... 3 2. Updating the firmware... 4 3. ListRE program... 4 4. LCD2Clip program... 5 5. FlashRWE

More information

Point of view HDMI Smart TV dongle Mini RF Keyboard

Point of view HDMI Smart TV dongle Mini RF Keyboard Point of view HDMI Smart TV dongle Mini RF Keyboard English Contents Contents... 1 General notices for use... 2 Disclaimer... 2 Box Contents... 2 1. HDMI TV dongle... 3 1.1. Product display... 3 1.2. Instructions

More information

Appendix C. Network Requirements. The Browser Interface. For Windows

Appendix C. Network Requirements. The Browser Interface. For Windows Appendix C This appendix provides information on designing, troubleshooting and optimizing Ethernet networks used with Premiere systems. The Browser Interface The browser interface is used to view and

More information

Installation Guide Wireless 4-Port USB Sharing Station. GUWIP204 Part No. M1172-a

Installation Guide Wireless 4-Port USB Sharing Station. GUWIP204 Part No. M1172-a Installation Guide Wireless 4-Port USB Sharing Station 1 GUWIP204 Part No. M1172-a 2011 IOGEAR. All Rights Reserved. PKG-M1172-a IOGEAR, the IOGEAR logo, MiniView, VSE are trademarks or registered trademarks

More information

100 240VAC 50/60Hz Power Adapter

100 240VAC 50/60Hz Power Adapter DGS-1224T D-Link 24-Port 10/100/1000Mbps + 2 Combo Mini GBIC Gigabit Smart Switch Broadband Router Before Your Begin This Quick Installation Guide gives step-by-step instructions for setting up the D -Link

More information

ALARMS-xx. Remote Alarm Unit Setup Guide 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 RESET ALL

ALARMS-xx. Remote Alarm Unit Setup Guide 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 RESET ALL Remote Alarm Unit Setup Guide 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 RESET ALL User s Guide Version 1.0 07/01/2009 Michael Stevens & Partners Ltd. has made

More information

EC150 BASIC SOFTWARE SETUP GUIDE. Read This First. www.easyclocking.com. Easy Clocking EC150 Setup Guide - Page 1

EC150 BASIC SOFTWARE SETUP GUIDE. Read This First. www.easyclocking.com. Easy Clocking EC150 Setup Guide - Page 1 EC150 BASIC SOFTWARE SETUP GUIDE Read This First www.easyclocking.com Easy Clocking EC150 Setup Guide - Page 1 Step 1 - Registering the Software A"er installing the Easy Clocking So"ware, the next step

More information

Paraben s Phone Recovery Stick. v.4.3. Getting Started

Paraben s Phone Recovery Stick. v.4.3. Getting Started Paraben s Phone Recovery Stick v.4.3 Getting Started What s New Deleted data recovery for rooted Android 5 devices has been added. Faster recovery times. Improved the user interface and fixed minor bugs.

More information

Before You Begin You must have at least the following: Web Browser Wired Hub/Switch/Router OR Wireless 802.11b Router CD-ROM Drive

Before You Begin You must have at least the following: Web Browser Wired Hub/Switch/Router OR Wireless 802.11b Router CD-ROM Drive This product can be set up using any current Web browser, i.e., Internet Explorer 6.0 or Netscape Navigator 7.0 DCS-1000W D-Link 2.4Ghz Wireless Internet Camera Before You Begin You must have at least

More information

SLC 5/05 Processors Firmware/Operating System ControlFLASH Upgrade

SLC 5/05 Processors Firmware/Operating System ControlFLASH Upgrade Installation Instructions SLC 5/05 Processors Firmware/Operating System ControlFLASH Upgrade Catalog Numbers 1747-DU501 Topic Page System Requirements 3 Install ControlFLASH 3 Prior to Running ControlFLASH

More information

Software Installation and Printer Setup

Software Installation and Printer Setup Software Installation and Printer Setup The B9Creator software currently supports 3 operating system variants: Microsoft Windows, OS X, and 64bit Linux. Throughout this guide we will be using windows as

More information

OSM 2007 MONITORING SOFTWARE

OSM 2007 MONITORING SOFTWARE OSM 2007 MONITORING SOFTWARE Contents Preparation...3 Software Installation...4 Configuring OSM...6 Connecting a Device...16 Connecting to Station Monitoring Software...19 Troubleshooting...23 Installing

More information

Sound Level Meter Instruction Manual

Sound Level Meter Instruction Manual MODEL: AR844 Sound Level Meter Instruction Manual Version: SZ844-0 Precauction Thank you for pruchasing our Digital sound level meter. This manual provides relative information on how to use the unit and

More information

COLOR TFT LCD MONITOR. User Manual

COLOR TFT LCD MONITOR. User Manual COLOR TFT LCD MONITOR User Manual GENERAL INFORMATION Thank you for choosing our TFT LCD(liquid crystal display) monitor. This product employs integrate circuits, low power consumption, and no radiation

More information

USR-TCP232-300 Hard version: V2.0 File version: V1.1 2011-8-17

USR-TCP232-300 Hard version: V2.0 File version: V1.1 2011-8-17 Serial Device Server - RS232/RS485 to Ethernet converter USR-TCP232-300 Hard version: V2.0 File version: V1.1 2011-8-17 Serial Device Server - RS232/RS485 to Ethernet converter is an Equipment for convert

More information

Ethernet Interface Manual Thermal / Label Printer. Rev. 1.01 Metapace T-1. Metapace T-2 Metapace L-1 Metapace L-2

Ethernet Interface Manual Thermal / Label Printer. Rev. 1.01 Metapace T-1. Metapace T-2 Metapace L-1 Metapace L-2 Ethernet Interface Manual Thermal / Label Printer Rev. 1.01 Metapace T-1 Metapace T-2 Metapace L-1 Metapace L-2 Table of contents 1. Interface setting Guiding...3 2. Manual Information...4 3. Interface

More information

3.5 LAN HDD Enclosure User s Manual

3.5 LAN HDD Enclosure User s Manual 3.5 LAN HDD Enclosure User s Manual NOTE: 1. USB and LAN can t be used at the same time. 2. HDD should be formatted as FAT32. Please check Disk utility section in this manual. 3. For internet FTP usage,

More information

3.5 EXTERNAL NETWORK HDD. User s Manual

3.5 EXTERNAL NETWORK HDD. User s Manual 3.5 EXTERNAL NETWORK HDD User s Manual Table of Content Before You Use Key Features H/W Installation Illustration of Product LED Definition NETWORK HDD Assembly Setup the Network HDD Home Disk Utility

More information

Energy Communication Unit (ECU)

Energy Communication Unit (ECU) Altenergy Power System Energy Communication Unit (ECU) Installation and User Manual (For ECU-3 V3.7) Version:3.0 ALTENERGY POWER SYSTEM INC. All rights reserved TABLE OF CONTENTS 1.0 Introduction... 2

More information

WiFi Precision Clocks When you absolutely can't afford a time shift Installation and Operation Manual

WiFi Precision Clocks When you absolutely can't afford a time shift Installation and Operation Manual www.css-timemachines.com WiFi Precision Clocks When you absolutely can't afford a time shift Installation and Operation Manual Table of Contents 1 Introduction...1 2 Initial Setup...2 2.1 WiFi Connection...2

More information

CALL MANAGER INSTALLATION

CALL MANAGER INSTALLATION CALL MANAGER INSTALLATION and OPERATION INSTRUCTIONS JULY 17, 2006 Page 1 TABLE OF CONTENTS INTRODUCTION Use of this manual ----------------------------------------------------------------- 2 Product Overview

More information

RJ45 Shielded (standard) port pinout. CS9000, Jetstream 4000 + 8500, Lanstream 2000, RTA8/RJX, RRC16, MTA8/RJX & SXDC8/RJX

RJ45 Shielded (standard) port pinout. CS9000, Jetstream 4000 + 8500, Lanstream 2000, RTA8/RJX, RRC16, MTA8/RJX & SXDC8/RJX Shielded (standard) port pinout Pin Circuit Function 1 DCD Input Data Carrier Detect 2 DSR Output Data Set Ready 3 DTR Input Data Terminal Ready 4 S/GND Signal Ground 5 TXD Output Transmit Data 6 RXD Input

More information

IP SERIAL DEVICE SERVER

IP SERIAL DEVICE SERVER IP SERIAL DEVICE SERVER ( 1 / 2 / 4 serial port ) Installation guide And User manual Version 1.0 1Introduction... 5 1.1Direct IP mode...5 1.2Virtual COM mode...5 1.3Paired mode...6 1.4Heart beat... 6

More information

GE-DS-242-PoE Managed Ethernet Switch Installation Sheet

GE-DS-242-PoE Managed Ethernet Switch Installation Sheet GE Security GE-DS-242-PoE Managed Ethernet Switch Installation Sheet Package Contents Thank you for purchasing the GE Security GE-DS-242-PoE a 24-Port Fast Ethernet + 2-Port Gigabit TP/SFP Combo Managed

More information

WLAN Outdoor CPE For 2.4G. Quick Installation Guide

WLAN Outdoor CPE For 2.4G. Quick Installation Guide WLAN Outdoor CPE For 2.4G Quick Installation Guide Part I: External Installation Direction A. Check the parts in your box CPE SET 1 DC 12V/1.5A Power Adapter 1 PoE DC Injector 1 Hose Clamps 2 Manual &

More information

Ericsson W25. Mobile Networks. Quick Installation Guide

Ericsson W25. Mobile Networks. Quick Installation Guide Ericsson W25 Fixed Wireless Terminal for WCDMA/HSDPA Mobile Networks Quick Installation Guide Table of Contents INTRODUCTION... 3 Package Contents... 3 Requirements... 3 INSTALLATION... 4 Unit Preparation...

More information

Basic Software Setup Guide. www.easyclocking.com

Basic Software Setup Guide. www.easyclocking.com 1 Basic Software Setup Guide www.easyclocking.com 2 Table of Contents Software registration 3 How to connect the time clock.. 5 How to turn the time clock on 5 Defining the type of connection... 5 TCP/IP

More information

PowerShield SNMP Adaptor

PowerShield SNMP Adaptor PowerShield SNMP Adaptor This manual describes the setup and operation of the PowerShield SNMP adaptor for the Sentinel battery monitoring system 6300-079A SNMP User Manual Page 1 of 9 1. Connecting the

More information

Operating instructions I / DALI EASY II Version 1.0. General. Contents. General

Operating instructions I / DALI EASY II Version 1.0. General. Contents. General Operating instructions I / 2007 General Contents General Installation Appendix Safety information 2 Definition of terms 3 Application and function 4 Components 5 Wiring diagrams 6 Wiring diagrams 7 System

More information

Using GIGABYTE Notebook for the First Time

Using GIGABYTE Notebook for the First Time P34 V6.0 Congratulations on your purchase of the GIGABYTE Notebook. This manual will help you to get started with setting up your notebook. The final product configuration depends on the model at the point

More information

The Cable Ferret Company

The Cable Ferret Company The Cable Ferret Company wigcam CF2810B Wireless Inspection Camera and LCD Display Instruction Manual Model: wigcam CF2810B Version 2.0 2014 The Cable Ferret Company Pty Ltd (AU) The Cable Ferret Company

More information

c. Securely insert the Ethernet cable from your cable or DSL modem into the Internet port (B) on the WGT634U. Broadband modem

c. Securely insert the Ethernet cable from your cable or DSL modem into the Internet port (B) on the WGT634U. Broadband modem Start Here Follow these instructions to set up your router. Verify That Basic Requirements Are Met Assure that the following requirements are met: You have your broadband Internet service settings handy.

More information

System Administration Guide. Model KS 832. Expandable up to 1664

System Administration Guide. Model KS 832. Expandable up to 1664 System Administration Guide Model KS 832 Expandable up to 1664 Introduction 4 Installation Hints 4 System Programming 5 - System Password 5 - Changing Password 5 Exchange Line Set up 6 - Caller Display

More information

BC-8000 Field Calibration Procedure 55 AMP

BC-8000 Field Calibration Procedure 55 AMP BC-8000 Field Calibration Procedure 55 AMP CF1_FIELDCAL_BC8000 Revised 9/8/2012 Charger section can be used on a BC-9000 Version 1.00 INTRODUCTION: The BC-8000 Battery Capacity Analyzer and Charger will

More information

TDP43ME NetPS. Network Printer Server. Control Center. for Ethernet Module

TDP43ME NetPS. Network Printer Server. Control Center. for Ethernet Module Panduit Corp. 2010 TDP43ME NetPS PA26306A01 Rev. 01 11-2010 Network Printer Server Control Center for Ethernet Module NOTE: In the interest of higher quality and value, Panduit products are continually

More information

Connecting to the Internet. LAN Hardware Requirements. Computer Requirements. LAN Configuration Requirements

Connecting to the Internet. LAN Hardware Requirements. Computer Requirements. LAN Configuration Requirements Connecting to the Internet LAN Hardware Requirements Computer Requirements LAN Configuration Requirements Installation Performed by Time Warner Cable Technician Connecting via Ethernet Connecting via USB

More information

POS 208 / 808 USER S MANUAL INTELLIGENT CASH DRAWER WEDGES DISTRIBUTED BY MADE IN CANADA

POS 208 / 808 USER S MANUAL INTELLIGENT CASH DRAWER WEDGES DISTRIBUTED BY MADE IN CANADA POS 208 / 808 DISTRIBUTED BY INTELLIGENT CASH DRAWER WEDGES MADE IN CANADA USER S MANUAL 2 Table of Contents Introduction............................................... 3 POS 208 Installation........................................

More information

Chapter 1 Installing the Gateway

Chapter 1 Installing the Gateway Chapter 1 Installing the Gateway This chapter describes how to set up the wireless voice gateway on your Local Area Network (LAN), connect to the Internet, and perform basic configuration. For information

More information

RPLIDAR. Low Cost 360 degree 2D Laser Scanner (LIDAR) System Development Kit User Manual. 2014-2 Rev.1

RPLIDAR. Low Cost 360 degree 2D Laser Scanner (LIDAR) System Development Kit User Manual. 2014-2 Rev.1 RPLIDAR Low Cost 360 degree 2D Laser Scanner (LIDAR) Development Kit User Manual 2014-2 Rev.1 Team Contents: 1. OVERVIEW... 2 ITEMS IN DEVELOPMENT KIT... 2 RPLIDAR... 2 USB ADAPTER... 3 2. CONNECTION AND

More information

Windows 10.1 Tablet (UB-15MS10 and UB-15MS10SA) FAQ. October 2014

Windows 10.1 Tablet (UB-15MS10 and UB-15MS10SA) FAQ. October 2014 Windows 10.1 Tablet (UB-15MS10 and UB-15MS10SA) FAQ October 2014 Navigation... 2 Question 1: How do I navigate while using a mouse or trackpad?... 2 Question 2: What should I do if I cannot find an app,

More information

DSO138 oscilloscope program upgrade method

DSO138 oscilloscope program upgrade method DSO138 oscilloscope program upgrade method Applicable models: 13801K, 13802K Program upgrade Principle The DSO138 is a SCM STM32F103C8 internal oscilloscope that is preinstalled with a flash bootloader,

More information

DX4010V2. Installation Instructions. RS-232/USB Serial Interface Module

DX4010V2. Installation Instructions. RS-232/USB Serial Interface Module DX4010V2 EN Installation Instructions RS-232/USB Serial Interface Module DX4010V2 Installation Instructions Trademarks Trademarks BlackBox is either a registered trademark or a trademark of BlackBox Corporation

More information

Leuze electronic. Hand-held barcode scanner. Dimensioned drawing. Electrical connection

Leuze electronic. Hand-held barcode scanner. Dimensioned drawing. Electrical connection Hand-held barcode scanner Dimensioned drawing Part No. 501 07087 4,5-12 V DC We reserve the right to make changes BP_IT3800g_gb.fm Hand-held scanner for barcodes Large reading field for the detection of

More information

Aolynk DR814Q ADSL2+ Broadband Router Quick Start

Aolynk DR814Q ADSL2+ Broadband Router Quick Start Aolynk DR814Q ADSL2+ Broadband Router 1 Packing List Quick Start Unpack the shipping carton carefully and check the following items listed below: One Aolynk DR814Q ADSL2+ Broadband Router One power adapter

More information