Miniature Power Relays

Transcription

1 Miniature Power Relays MY New Latching Levers for Circuit Checking Added to Our Best-selling MY General-purpose Relays Now lead-free to protect the environment. VDE certification (Germany). Different colors of coil tape for AC and DC models to more easily distinguish them. MY(S) models with latching levers added for easier circuit checking. Refer to the Common Relay Precautions. Model Number Structure Structure Relays with Plug-in Terminals PCB terminals Case-surface mounting Classification Standard models (compliant with Electrical Appliances and Material Safety Act) Models with diode for coil surge absorption (DC coil specification only) Models with CR circuit for coil surge absorption (AC coil specification only) Models with high contact reliability 2 Number of poles With operation indicator MY2N* Without operation indicator MY2* With latching lever MY2IN(S)* MY2-02 MY2F Bifurcated MY2ZN MY2Z 3 MY3N MY3 MY3-02 MY3F MYN* MY* MYIN(S)* MY-02 MYF Bifurcated MYZN* MYZ* MYZIN(S)* MYZ-02 MYZF 2 MY2N-D2* MY2-D* MY2IN-D2(S)* Bifurcated MY2ZN-D2 MY2Z-D 3 MY3N-D2 MY3-D MYN-D2* MY-D* Bifurcated MYZN-D2* MYZ-D* 2 MY2N-CR* MY2-CR* Bifurcated MYN-CR* MYZN-CR* MY-CR* MYZ-CR* Bifurcated --- MYZ-CBG MYIN-D2(S)* MYZIN-D2(S)* MYIN-CR(S)* MYZIN-CR(S)* MYQN MYQ MYQ-02 Plastic sealed models Bifurcated MYQZ MYQZ-02 Latching models (coil latching) 2 MY2K MY2K-02 MYH MYH-0 Hermetic models Bifurcated MYZH MYZH Note:. The models in this table are UL/CSA certified. This is indicated with a certification mark on the products. (This does not include models with high contact reliability or plastic sealed, latching, or hermetically sealed models.) 2. Models with an asterisk (*) next to them are new versions. 3. The standard models with plug-in terminals, models with coil surge absorption diodes, and models with coil surge absorption CR circuits were used in combination with the PYF-E and PYFS (2-pole and -pole) for the EC Declaration of Conformity. These products display the CE Marking.. Products cannot be manufactured for the cells with a diagonal line. Ask your OMRON representative for details on manufacturing products for cells containing --- in the above table. --- Refer to Connection Socket and Mounting Bracket Selection Table on page 33 in Options for information on the possible combinations of Models with Plug-in Terminals and Sockets.

2 Miniature Power Relays: MY2 Refer to the standards certifications and compliance section of your OMRON website for the latest information on certified models. Ordering Information Standard models Classification Note:. Ask your OMRON representative for details on the time required to deliver made-to-order products. 2. Ask your OMRON representative for details on product specifications and the ability to manufacture products with voltages other than the above coil specifications. 3. The above models and specifications are new versions in the MY Series.. Except for MY2(N)-CR Relays with the above voltage specifications, all Relays have a height of 3 mm or less. If Mounting Brackets are required, refer to page 33 for selection information. Ratings and Specifications Ratings Operating Coils (Standard Models) Note:. The rated current and coil are measured at a coil temperature of 23 C with tolerances of +%/ 20% for the AC rated current and ±% for the DC coil. 2. The AC coil and inductance values are reference values only. 3. Operating characteristics were measured at a coil temperature of 23 C.. The maximum voltage capacity was measured at an ambient temperature of 23 C. *. There is variation between products, but actual values are 80% max. To ensure operation, apply at least 80% of the rated value (at a coil temperature of +23 C). *2. There is variation between products, but actual values are 30% minimum for AC and % minimum for DC. To ensure release, use a value that is lower than the specified value. Contact Ratings MY2 Model Standard products Rated Made-to-order items 2, 2, 0/, or 200/220 VAC /20 or 220/20 VAC 2, 2, 8, or 0/ VDC Models with built-in operation indicators MY2N 2, 2, 0/, /20, 200/220, or 220/20 VAC 2, 2, 8, or 0/ VDC Models with built-in diodes MY2-D 2, 2, or 0/ VDC 8 VDC Models with built-in diodes and operation indicators MY2N-D2 2, 2, 8, or 0/ VDC Models with built-in CR circuits MY2-CR 0/ or 200/220 VAC /20 or 220/20 VAC Models with built-in CR circuits and operation indicators MY2N-CR 0/ or 200/220 VAC /20 or 220/20 VAC Rated current (ma) Coil inductance (H) Coil Rated (Ω) Armature Armature Hz 60 Hz OFF ON AC DC Rated load /.7/2.9 / 3, /20 9.9/.8 8./9.2, / /6.8.3/.8 2, /20.8/.3.2/.6 8, , / 8.7/9.6, Load Rated carry current Maximum contact voltage Maximum contact current Contact configuration Contact structure Contact materials Resistive load A at 220 VAC A at 2 VDC A 2 VAC, 2 VDC A DPDT Single Ag Inductive load (cos φ = 0., L/R = 7 ms) 2 A at 220 VAC 2 A at 2 VDC Mustoperate 80% max. * Type Mustrelease 30% min. *2 Maximum % of rated voltage Power consumption (VA, W) Approx..0 to.2 Approx. 0.9 to. % min. *2 Approx. 0.9 Standard models Ambient operating to 70 C to 60 C *2 temperature * Ambient operating humidity % to 8% Model with built-in operation indicator, diode, or CR circuit *. With no icing or condensation. *2. This limitation is due to the diode junction temperature and elements used. 2

3 Characteristics Contact * Operation time *2 Release time *2 Maximum Mechanical operating frequency Rated load Insulation *3 Dielectric strength Vibration Shock Endurance Type Standard models mω max. 8,000 operations/h,800 operations/h Models with builtin operation indicators Models with built-in CR circuits Models with built-in diodes 0 MΩ min. Between coil and contacts Between contacts of 2,000 VAC at /60 Hz for min. different polarity Between contacts of the same polarity,000 VAC at /60 Hz for min. Destruction to to Hz, -mm single amplitude (.0-mm double amplitude) Malfunction to to Hz, -mm single amplitude (.0-mm double amplitude) Destruction,000 m/s 2 Malfunction 200 m/s 2 Mechanical Electrical * AC:,000,000 operations min. DC: 0,000,000 operations min. (switching frequency: 8,000 operations/h) 0,000 operations min. (rated load, switching frequency:,800 operations/h) Model with built-in operation indicator and diode Model with built-in operation indicator and CR circuit Number of poles 2 poles Note: These are initial values. Failure rate P value (reference value) * Weight ma at VDC Approx. 3 g *. Measurement conditions: A at VDC using the voltage drop method. *2. Measurement conditions: With rated operating power applied. Ambient temperature condition: 23 C *3. Measurement conditions: For 0 VDC applied to the same location as for dielectric strength measurement. *. Ambient temperature condition: 23 C *. This value was measured at a switching frequency of 20 operations per minute. Dimensions (Unit: mm) MY2, MY2N, MY2-D, MY2N-D2, MY2-CR, and MY2N-CR Terminal Arrangement/Internal Connections (Bottom View) Standard Models DC Models MY2N AC Models 2.6 Eight,.2-dia. 2.2 oval holes 28 max. 36 max max. Check the coil polarity when wiring and wire all connections correctly. Note:. An AC model has coil disconnection selfdiagnosis. 2. For the DC models, check the coil polarity when wiring and wire all connections correctly. 3. The indicator is red for AC and green for DC.. The operation indicator indicates the energization of the coil and does not represent contact operation. MY2-D MY2N-D2 MY2-CR MY2N-CR Check the coil polarity when wiring and wire all connections correctly. Check the coil polarity when wiring and wire all connections correctly. 3

4 Miniature Power Relays: MY2Z Ordering Information Refer to the standards certifications and compliance section of your OMRON website for the latest information on certified models. Standard models Classification Models with built-in operation indicators Note:. Ask your OMRON representative for details on the time required to deliver made-to-order products. 2. Ask your OMRON representative for details on product specifications and the ability to manufacture products with voltages other than the above coil specifications. Ratings and Specifications Ratings Operating Coil (Standard Models) Note:. The rated current and coil are measured at a coil temperature of 23 C with tolerances of +%/ 20% for the AC rated current and ±% for the DC coil. 2. The AC coil and inductance values are reference values only. 3. Operating characteristics were measured at a coil temperature of 23 C.. The maximum voltage capacity was measured at an ambient temperature of 23 C. *. There is variation between products, but actual values are 80% max. To ensure operation, apply at least 80% of the rated value *2. There is variation between products, but actual values are 30% minimum for AC and % minimum for DC. To ensure release, use a value that is lower than the specified value. Contact Ratings MY2Z MY2ZN Model Standard products Rated Made-to-order items 0/ or 200/220 VAC 2, 2, 0/20, or 200/20 VAC 2 or 2 VDC 8 or 0/ VDC 0/ or 200/220 VAC 2, 2, 0/20, or 200/20 VAC 2 VDC 2, 8, or 0/ VDC Models with built-in diodes MY2Z-D 2 VDC 2 or 0/ VDC Models with built-in diodes and operation indicators MY2ZN-D2 2 or 0/ VDC 2 VDC Models with built-in CR circuits MY2Z-CR 0/ or 200/220 VAC Models with built-in CR circuits and operation indicators MY2ZN-CR 0/ VAC 200/220 VAC Rated current (ma) Coil inductance (H) Coil Rated (Ω) Armature Armature Hz 60 Hz OFF ON AC 0/.7/2.9 / 3, /20 9.9/.8 8./9.2, / /6.8.3/.8 2, /20.8/.3.2/.6 8, DC , / 9./, Rated load Rated carry current Load Maximum contact voltage Maximum contact current Contact configuration Contact structure Contact materials Resistive load A at 220 VAC A at 2 VDC A 2 VAC, 2 VDC A DPDT Bifurcated Au plating + Ag Inductive load (cos φ = 0., L/R = 7 ms) 2 A at 220 VAC 2 A at 2 VDC Mustoperate 80% max. * Type Mustrelease 30% min. *2 Maximum % of rated voltage Power consumption (VA, W) Approx..0 to.2 Approx. 0.9 to. % min. *2 Approx. 0.9 Standard models Ambient operating to 70 C to 60 C *2 temperature * Ambient operating humidity % to 8% Model with built-in operation indicator, diode, or CR circuit *. With no icing or condensation. *2. This limitation is due to the diode junction temperature and elements used.

5 Characteristics Contact * Operation time *2 Release time *2 Maximum Mechanical operating frequency Rated load Insulation *3 Dielectric strength Vibration Shock Type Standard models mω max. 8,000 operations/h,800 operations/h Models with builtin operation indicators Models with built-in diodes Model with built-in operation indicator and diode 0 MΩ min. Between coil and contacts Between contacts of 2,000 VAC at /60 Hz for min. different polarity Between contacts of the same polarity,000 VAC at /60 Hz for min. Destruction to to Hz, -mm single amplitude (.0-mm double amplitude) Malfunction to to Hz, -mm single amplitude (.0-mm double amplitude) Destruction,000 m/s 2 Malfunction 200 m/s 2 Mechanical,000,000 operations min. (operating frequency: 8,000 operations/h) Endurance Electrical * 200,000 operations min. (rated load, switching frequency:,800 operations/h) Models with built-in CR circuits Models with built-in CR circuits and operation indicators Number of poles 2 poles Note: These are initial values. Failure rate P value (reference value) * Weight 0 µa at VDC Approx. 3 g *. Measurement conditions: A at VDC using the voltage drop method. *2. Measurement conditions: With rated operating power applied. Ambient temperature condition: 23 C *3. Measurement conditions: For 0 VDC applied to the same location as for dielectric strength measurement. *. Ambient temperature condition: 23 C *. This value was measured at a switching frequency of 20 operations per minute. Dimensions (Unit: mm) MY2Z, MY2ZN, MY2Z-D, MY2ZN-D2, MY2Z-CR, and MY2ZN-CR Terminal Arrangement/ Internal Connections (Bottom View) Standard Models DC Models MY2ZN AC Models 2.6 Eight,.2-dia. 2.2 oval holes 28 max. 36 max max. * For the MY2Z-CR and MY2ZN-CR, this dimension is 3 mm max. Check the coil polarity when wiring and wire all connections correctly. Note:. An AC model has coil disconnection selfdiagnosis. 2. For the DC models, check the coil polarity when wiring and wire all connections correctly. 3. The indicator is red for AC and green for DC.. The operation indicator indicates the energization of the coil and does not represent contact operation. MY2Z-D MY2ZN-D2 MY2Z-CR MY2ZN-CR Check the coil polarity when wiring and wire all connections correctly. Check the coil polarity when wiring and wire all connections correctly.

6 Miniature Power Relays: MY3 Ordering Information Refer to the standards certifications and compliance section of your OMRON website for the latest information on certified models. Standard models Classification Models with built-in operation indicators Note:. Ask your OMRON representative for details on the time required to deliver made-to-order products. 2. Ask your OMRON representative for details on product specifications and the ability to manufacture products with voltages other than the above coil specifications. Ratings and Specifications Ratings Operating Coil (Standard Models) Note:. The rated current and coil are measured at a coil temperature of 23 C with tolerances of +%/ 20% for the AC rated current and ±% for the DC coil. 2. The AC coil and inductance values are reference values only. 3. Operating characteristics were measured at a coil temperature of 23 C.. The maximum voltage capacity was measured at an ambient temperature of 23 C. *. There is variation between products, but actual values are 80% max. To ensure operation, apply at least 80% of the rated value *2. There is variation between products, but actual values are 30% minimum for AC and % minimum for DC. To ensure release, use a value that is lower than the specified value. Contact Ratings MY3 MY3N Model Standard products Rated 2, 0/, 200/220, or 220/20 VAC 2, or /20 VAC 2, 2, or 0/ VDC 8 VDC 2, 0/, 200/220, or 220/20 VAC 2, or /20 VAC Made-to-order items 2 VDC 2, 8, or 0/ VDC Models with built-in diodes MY3-D 2 VDC 2 or 0/ VDC Models with built-in diodes and operation indicators Rated current (ma) Coil inductance (H) Coil Rated (Ω) Armature Armature Hz 60 Hz OFF ON AC DC Rated load 0/.7/2.9 / 3, /20 9.9/.8 8./9.2, / /6.8.3/.8 2, /20.8/.3.2/.6 8, ? , / 9./, Rated carry current Load Maximum contact voltage Maximum contact current Contact configuration Contact structure Contact materials Resistive load A at 220 VAC A at 2 VDC A 2 VAC, 2 VDC A 3PDT Single Ag MY3N-D2 2 VDC 2 or 0/ VDC Inductive load (cos φ = 0., L/R = 7 ms) 2 A at 220 VAC 2 A at 2 VDC Mustoperate 80% max. * Mustrelease 30% min. *2 Maximum % of rated voltage Power consumption (VA, W) Approx..0 to.2 Approx. 0.9 to. % min. *2 Approx. 0.9 Type Standard models Operation indicator and diode Ambient operating to 70 C to 60 C *2 temperature * Ambient operating humidity % to 8% *. With no icing or condensation. *2. This limitation is due to the diode junction temperature and elements used. 6

7 Characteristics Type Standard models Contact * Operation time *2 Release time *2 Maximum Mechanical operating frequency Rated load Insulation *3 Dielectric strength Vibration Shock Endurance Between coil and contacts Between contacts of different polarity Between contacts of the same polarity Destruction mω max. 8,000 operations/h,800 operations/h 0 MΩ min. 2,000 VAC at /60 Hz for min.,000 VAC at /60 Hz for min. Models with built-in operation indicators Models with built-in diodes to to Hz, -mm single amplitude (.0-mm double amplitude) Malfunction to to Hz, -mm single amplitude (.0-mm double amplitude) Destruction,000 m/s 2 Malfunction 200 m/s 2 Mechanical Electrical * AC:,000,000 operations min. DC: 0,000,000 operations min. (switching frequency: 8,000 operations/h) 0,000 operations min. (rated load, switching frequency:,800 operations/h) Model with built-in operation indicator and diode Number of poles 3 poles Note: These are initial values. Failure rate P value (reference value) * Weight Dimensions ma at VDC Approx. 3 g *. Measurement conditions: A at VDC using the voltage drop method *2. Measurement conditions: With rated operating power applied. Ambient temperature condition: 23 C *3. Measurement conditions: For 0 VDC applied to the same location as for dielectric strength measurement. *. Ambient temperature condition: 23 C *. This value was measured at a switching frequency of 20 operations per minute. (Unit: mm) MY3, MY3N, MY3-D, and MY3N-D2 Terminal Arrangement/ Internal Connections (Bottom View) Standard Models DC Models MY3N AC Models 2.6 Eleven,.2-dia. 2.2 oval holes 28 max. 36 max max. 6.3 Check the coil polarity when wiring and wire all connections correctly. MY3-D MY3N-D2 Note:. An AC model has coil disconnection selfdiagnosis. 2. For the DC models, check the coil polarity when wiring and wire all connections correctly. 3. The indicator is red for AC and green for DC.. The operation indicator indicates the energization of the coil and does not represent contact operation. Check the coil polarity when wiring and wire all connections correctly. Check the coil polarity when wiring and wire all connections correctly. 7

8 Miniature Power Relays: MY Ordering Information Refer to the standards certifications and compliance section of your OMRON website for the latest information on certified models. Standard models Classification Note:. Ask your OMRON representative for details on the time required to deliver made-to-order products. 2. Ask your OMRON representative for details on product specifications and the ability to manufacture products with voltages other than the above coil specifications. 3. The above models and specifications are new versions in the MY Series.. Except for MY(N)-CR Relays with the above voltage specifications, all Relays have a height of 3 mm or less. If Mounting Brackets are required, refer to page 33 for selection information. Ratings and Specifications Ratings Operating Coil (Standard Models) Note:. The rated current and coil are measured at a coil temperature of 23 C with tolerances of +%/ 20% for the AC rated current and ±% for the DC coil. 2. The AC coil and inductance values are reference values only. 3. Operating characteristics were measured at a coil temperature of 23 C.. The maximum voltage capacity was measured at an ambient temperature of 23 C. *. There is variation between products, but actual values are 80% max. To ensure operation, apply at least 80% of the rated value *2. There is variation between products, but actual values are 30% minimum for AC and % minimum for DC. To ensure release, use a value that is lower than the specified value. Contact Ratings MY Model Standard products Rated Made-to-order items 2, 0/, or 200/220 VAC 2, /20, or 220/20 VAC 2, 2, 8, or 0/ VDC Models with built-in operation indicators MYN 2, 2, 0/, /20, 200/220, or 220/20 VAC 2, 2, 8, or 0/ VDC Models with built-in diodes MY-D 2, 2, 8, or 0/ VDC Models with built-in diodes and operation indicators MYN-D2 2, 2, or 0/ VDC 8 VDC Models with built-in CR circuits MY-CR 0/ or 200/220 VAC /20 or 220/20 VAC Models with built-in CR circuits and operation indicators MYN-CR 0/, /20, or 200/220 VAC 220/20 VAC Rated current (ma) Coil inductance (H) Coil Rated (Ω) Armature Armature Hz 60 Hz OFF ON AC 0/.7/2.9 / 3, /20 9.9/.8 8./9.2, / /6.8.3/.8 2, /20.8/.3.2/.6 8, DC , / 8.7/9.6, Rated load Rated carry current Load Maximum contact voltage Maximum contact current Contact configuration Contact structure Contact materials Resistive load 3 A at 220 VAC 3 A at 2 VDC 3 A 2 VAC, 2 VDC 3 A PDT Single Au cladding + Ag alloy Inductive load (cos φ = 0., L/R = 7 ms) 0.8 A at 220 VAC. A at 2 VDC Mustoperate 80% max. * Type Mustrelease 30% min. *2 Maximum % of rated voltage Power consumption (VA, W) Approx..0 to.2 Approx. 0.9 to. % min. *2 Approx. 0.9 Standard models Ambient operating to 70 C to 60 C *2 temperature * Model with built-in operation indicator, diode, or CR circuit Ambient operating % to 8% humidity *. With no icing or condensation. *2. This limitation is due to the diode junction temperature and elements used. 8

9 Characteristics Contact * Operation time *2 Release time *2 Maximum Mechanical operating frequency Rated load Insulation *3 Dielectric strength Vibration Shock Endurance Type Standard models mω max. 8,000 operations/h,800 operations/h Models with builtin operation indicators Models with built-in CR circuits Models with built-in diodes 0 MΩ min. Between coil and contacts Between contacts of 2,000 VAC at /60 Hz for min. different polarity Between contacts of the same polarity,000 VAC at /60 Hz for min. Destruction to to Hz, -mm single amplitude (.0-mm double amplitude) Malfunction to to Hz, -mm single amplitude (.0-mm double amplitude) Destruction,000 m/s 2 Malfunction 200 m/s 2 Mechanical Electrical * AC:,000,000 operations min. DC: 0,000,000 operations min. (switching frequency:: 8,000 operations/h) 200,000 operations min. (rated load, switching frequency:,800 operations/h) Model with built-in operation indicator and diode Model with built-in operation indicator and CR circuit Number of poles poles Note: These are initial values. Failure rate P value (reference value) * Weight ma at VDC Approx. 3 g *. Measurement conditions: A at VDC using the voltage drop method *2. Measurement conditions: With rated operating power applied. Ambient temperature condition: 23 C *3. Measurement conditions: For 0 VDC applied to the same location as for dielectric strength measurement. *. Ambient temperature condition: 23 C *. This value was measured at a switching frequency of 20 operations per minute. Engineering Data List of Actual Load Endurance (Refer to Engineering Data on page 20.) Model Load type Conditions Switching frequency MY DC2V AC magnetic switch DC solenoid 3 VA at 0 VAC Making current: A, Steady-state current: 0.3 A 0 W at 2 VDC Steady-state current:.6 A, L/R = ms Surge-absorbing diode connected 20 W at 2 VDC Steady-state current: 0.8 A, L/R = ms Surge-absorbing diode connected ON: s OFF: 3s ON: s OFF:.s ON: s OFF:.s Electrical durability (operations min.) 0,000 0,000,000,000 9

10 Dimensions MY (Unit: mm) MY, MYN, MY-D, MYN-D2, MY-CR, and MYN-CR Terminal Arrangement/ Internal Connections (Bottom View) Standard Models DC Models MYN AC Models 2.6 Fourteen,.2-dia. 2.2 oval holes 36 max max. Check the coil polarity when wiring and wire all connections correctly. 2. max. Note:. An AC model has coil disconnection selfdiagnosis. 2. For the DC models, check the coil polarity when wiring and wire all connections correctly. 3. The indicator is red for AC and green for DC.. The operation indicator indicates the energization of the coil and does not represent contact operation. MY-D MYN-D2 MY-CR MYN-CR Check the coil polarity when wiring and wire all connections correctly. Check the coil polarity when wiring and wire all connections correctly.

11 Miniature Power Relays: MYZ Ordering Information Refer to the standards certifications and compliance section of your OMRON website for the latest information on certified models. Standard models Classification Models with built-in operation indicators Note:. Ask your OMRON representative for details on the time required to deliver made-to-order products. 2. Ask your OMRON representative for details on product specifications and the ability to manufacture products with voltages other than the above coil specifications. 3. The above models and specifications are new versions in the MY Series. Ratings and Specifications Ratings Operating Coil (Standard Models) Note:. The rated current and coil are measured at a coil temperature of 23 C with tolerances of +%/ 20% for the AC rated current and ±% for the DC coil. 2. The AC coil and inductance values are reference values only. 3. Operating characteristics were measured at a coil temperature of 23 C.. The maximum voltage capacity was measured at an ambient temperature of 23 C. *. There is variation between products, but actual values are 80% max. To ensure operation, apply at least 80% of the rated value *2. There is variation between products, but actual values are 30% minimum for AC and % minimum for DC. To ensure release, use a value that is lower than the specified value. Contact Ratings MYZ MYZN Model Standard products Rated Made-to-order items 0/ or 200/220 VAC /20 or 220/20 VAC 2, 2, 8, or 0/ VDC 0/ or 200/220 VAC 2, /20, or 220/20 VAC 2 or 0/ VDC 2 or 8 VDC Models with built-in diodes MYZ-D 2 or 0/ VDC 2 or 8 VDC Models with built-in diodes and operation indicators MYZN-D2 2, 2, 8, or 0/ VDC Models with built-in CR circuits MYZ-CR 0/ or 200/220 VAC /20 or 220/20 VAC Models with built-in CR circuits and operation indicators Rated current (ma) Coil inductance (H) Coil Rated (Ω) Armature Armature Hz 60 Hz OFF ON AC 0/.7/2.9 / 3, /20 9.9/.8 8./9.2, / /6.8.3/.8 2, /20.8/.3.2/.6 8, DC , / 8.7/9.6, Rated load Load Rated carry current Maximum contact voltage Maximum contact current Contact configuration Contact structure Contact materials Resistive load 3 A at 220 VAC 3 A at 2 VDC 3 A 2 VAC, 2 VDC 3 A PDT Bifurcated Au cladding + Ag alloy MYZN-CR 0/ or 200/220 VAC /20 or 220/20 VAC Inductive load (cos φ = 0., L/R = 7 ms) 0.8 A at 220 VAC. A at 2 VDC Mustoperate 80% max. * Release 30% min. *2 Type Standard models Ambient operating to 70 C temperature* Ambient operating % to 8% humidity Maximum % of rated voltage Power consumption (VA, W) Approx..0 to.2 Approx. 0.9 to. % min. *2 Approx. 0.9 Model with built-in operation indicator, diode, or CR circuit to 60 C *. With no icing or condensation. *2. This limitation is due to the diode junction temperature and elements used.

12 Characteristics Contact * Operation time *2 Release time *2 Maximum Mechanical operating frequency Rated load Insulation *3 Dielectric strength Vibration Shock Endurance Type Between coil and contacts Between contacts of different polarity Between contacts of the same polarity Destruction Standard models mω max. 8,000 operations/h,800 operations/h 0 MΩ min. Models with builtin operation indicators 2,000 VAC at /60 Hz for min.,000 VAC at /60 Hz for min. Models with built-in CR circuits Models with built-in diodes to to Hz, -mm single amplitude (.0-mm double amplitude) Malfunction to to Hz, -mm single amplitude (.0-mm double amplitude) Destruction,000 m/s 2 Malfunction 200 m/s 2 Mechanical Electrical * 20,000,000 operations min. (switching frequency: 8,000 operations/h) 0,000 operations min. (rated load, switching frequency:,800 operations/h) Model with built-in operation indicator and diode Model with built-in operation indicator and CR circuit Number of poles poles Note: These are initial values. Failure rate P value (reference value) * Weight Dimensions 0 µa at VDC Approx. 3 g *. Measurement conditions: A at VDC using the voltage drop method *2. Measurement conditions: With rated operating power applied. Ambient temperature condition: 23 C *3. Measurement conditions: For 0 VDC applied to the same location as for dielectric strength measurement. *. Ambient temperature condition: 23 C *. This value was measured at a switching frequency of 20 operations per minute. (Unit: mm) MYZ, MYZN, MYZ-D, MYZN-D2, MYZ-CR, and MYZN-CR Terminal Arrangement/ Internal Connections (Bottom View) Standard Models DC Models MYZN AC Models 2.6 Fourteen,.2-dia. 2.2 oval holes 36 max max. 28 max. Check the coil polarity when wiring and wire all connections correctly. Note:. An AC model has coil disconnection selfdiagnosis. 2. For the DC models, check the coil polarity when wiring and wire all connections correctly. 3. The indicator is red for AC and green for DC.. The operation indicator indicates the energization of the coil and does not represent contact operation. MYZ-D MYZN-D2 MYZ-CR MYZN-CR Check the coil polarity when wiring and wire all connections correctly. Check the coil polarity when wiring and wire all connections correctly. 2

13 Miniature Power Relays with Latching Levers: MY(S) LR Refer to the standards certifications and compliance section of your OMRON website for the latest information on certified models. Ordering Information Rated Classification Contact configuration Model Standard products Made-to-order items 2 MY2IN (S) --- 0/ or 200/220 VAC 2, 2, or 8 VDC --- Models with built-in operation --- 0/ or 200/220 VAC MYIN (S) indicators 2, 2, or 8 VDC --- bifurcated MYZIN (S) --- 0/ or 200/220 VAC --- 2, 2, or 8 VDC 2 MY2IN-D2 (S) 2 or 2 VDC 8 VDC Models with built-in diode for coil surge absorption MYIN-D2 (S) 2 VDC 2 or 8 VDC bifurcated MYZIN-D2 (S) 2 VDC 2 or 8 VDC Models with built-in CR circuit MYIN-CR (S) --- 0/ or 200/220 VAC for coil surge absorption bifurcated MYZIN-CR (S) --- 0/ or 200/220 VAC Note:. Ask your OMRON representative for details on the time required to deliver made-to-order products. 2. Ask your OMRON representative for details on product specifications and the ability to manufacture products with voltages other than the above coil specifications. Ratings and Specifications Ratings Operating Coil Rated current (ma) Coil Coil inductance (H) Rated Hz 60 Hz (Ω) Armature OFF Armature ON AC? 0/.7/2.9 / 3, / /6.8.3/.8 2, DC? , Note:. The rated current and coil are measured at a coil temperature of 23 C with tolerances of +%/ 20% for the AC rated current and ±% for the DC coil. 2. The AC coil and inductance values are reference values only. 3. Operating characteristics were measured at a coil temperature of 23 C.. The maximum voltage capacity was measured at an ambient temperature of 23 C. *. There is variation between products, but actual values are 80% max. To ensure operation, apply at least 80% of the rated value. *2. There is variation between products, but actual values are 30% minimum for AC and % minimum for DC. To ensure release, use a value that is lower than the specified value. Contact Ratings Rated load * If you use a Socket, do not exceed the rated carry current of the Socket. *. With no icing or condensation. *2. This limitation is due to the diode junction temperature and elements used. Must-operate 80% max. * Must-release Maximum 30% min. *2 % of rated voltage Power consumption (VA, W) Approx. 0.9 to. % min. *2 Approx. 0.9 Number of poles 2 poles poles poles (bifurcated) Load Resistive load Inductive load (cos Resistive load Inductive load (cos Resistive load Inductive load (cos (cos φ = ) φ = 0., L/R = 7 ms) (cos φ = ) φ = 0., L/R = 7 ms) (cos φ = ) φ = 0., L/R = 7 ms) A at 2 VAC A at 30 VDC 2 A at 2 VAC 2 A at 30 VDC Rated carry current A * A * 3 A at 2 VAC 3 A at 30 VDC 0.8 A at 2 VAC. A at 30 VDC 3 A at 2 VAC 3 A at 30 VDC Maximum contact voltage 2 VAC, 2 VDC Maximum contact current A A Contact configuration Single Single Bifurcated Contact materials Ag Au cladding + Ag alloy Au cladding + Ag alloy Type Model with built-in operation indicator, diode, or CR circuit Ambient operating temperature * to 60 C *2 Ambient operating humidity % to 8% 0.8 A at 2 VAC. A at 30 VDC 3

14 Characteristics Type 2 poles poles poles (bifurcated) Contact * Operation time *2 Release time *2 Maximum Mechanical operating frequency Rated load Insulation *3 Dielectric strength Vibration Shock Endurance 0 mω max. 8,000 operations/h,800 operations/h,000 MΩ min. Between coil and contacts Between 2,000 VAC at /60 Hz for min. contacts of different polarity Between contacts of the,000 VAC at /60 Hz for min. same polarity Destruction to to Hz, -mm single amplitude (.0-mm double amplitude) Malfunction to to Hz, -mm single amplitude (.0-mm double amplitude) Destruction,000 m/s 2 Malfunction 200 m/s 2 Mechanical Electrical * AC:,000,000 operations min., DC: 0,000,000 operations min. (switching frequency: 8,000 operations/h) 0,000 operations min. (rated load, switching frequency:,800 operations/h) 200,000 operations min. (rated load, switching frequency:,800 operations/h) Failure rate P value (reference value) * ma at VDC ma at VDC 0 µa at VDC Weight Approx. 3 g Note: These are initial values. *. Measurement conditions: A at VDC using the voltage drop method *2. Measurement conditions: When rated operating power is applied and ambient temperature is 23 C *3. Measurement conditions: For 0 VDC applied to the same location as for dielectric strength measurement. *. Ambient temperature condition: 23 C *. This value was measured at a switching frequency of 20 operations per minute. 20,000,000 operations min. (switching frequency: 8,000 operations/h) 0,000 operations min. (rated load, switching frequency:,800 operations/h)

15 Dimensions List of Models MY2IN (S) MY2IN-D2 (S) 2.6 MY (Unit: mm) 8 Eight,.2-dia. 2.2 oval holes max max max. Terminal Arrangement/Internal Connections (Bottom View) MY2IN(S) (AC Model) MY2IN(S) (DC Models) MY2IN-D2(S) (DC Models Only) Note: For the DC models, check the coil polarity when wiring and wire all connections correctly. MY (Z) IN (S) MY (Z) IN-D2 (S) MY (Z) IN-CR (S) Fourteen,.2-dia. 2.2 oval holes max max max. Terminal Arrangement/Internal Connections (Bottom View) MY(Z)IN(S) (DC Models) MY(Z)IN(S) (AC Models) MY(Z)IN-D2(S) (DC Models Only) MY(Z)IN-CR(S) (AC Models Only) Note: For the DC models, check the coil polarity when wiring and wire all connections correctly.

16 Relays with PCB Terminals: Ordering Information Refer to the standards certifications and compliance section of your OMRON website for the latest information on certified models. Number of poles 2 poles 3 poles poles Classification Models with single contacts Models with single contacts Models with single contacts Bifurcated contacts Note:. Ask your OMRON representative for details on the time required to deliver made-to-order products. 2. Ask your OMRON representative for details on product specifications and the ability to manufacture products with voltages other than the above coil specifications. Ratings and Specifications Ratings Operating Coil (Standard Models) Note:. The rated current and coil are measured at a coil temperature of 23 C with tolerances of +%/ 20% for the AC rated current and ±% for the DC coil. 2. The AC coil and inductance values are reference values only. 3. Operating characteristics were measured at a coil temperature of 23 C.. The maximum voltage capacity was measured at an ambient temperature of 23 C. *. There is variation between products, but actual values are 80% max. To ensure operation, apply at least 80% of the rated value. *2. There is variation between products, but actual values are 30% minimum for AC and % minimum for DC. To ensure release, use a value that is lower than the specified value. Contact Ratings MY2-02 MY3-02 MY-02 MYZ-02 Model Rated current (ma) Coil Coil inductance (H) Rated Hz 60 Hz (Ω) Armature OFF Armature ON AC 0/.7/2.9 / 3, /20 9.9/.8 8./9.2, / /6.8.3/.8 2, /20.8/.3.2/.6 8, DC , / 9./, Rated load Rated Standard products Made-to-order items 0/, 200/220, or 200/20 VAC 2, 2, 0, or /20 VAC 2, 2 or 8 VDC 0/ VDC 0/ or 200/220 VAC 2, 2, /20, or 220/20 VAC 2 VDC 2, 8, or 0/ VDC 0/ or 200/220 VAC 2, 2, /20, or 220/20 VAC 2, 2 or 0/ VDC 8 VDC --- 0/, /20, or 200/220 VAC 0/ VDC 2, 2, or 8 VDC Must-operate 80% max. * Must-release 30% min. *2 Maximum % of rated voltage Power consumption (VA, W) Approx..0 to.2 Approx. 0.9 to. % min. *2 Approx. 0.9 Number of poles 2 or 3 poles poles poles, bifurcated contacts Load Inductive load Inductive load Inductive load Resistive load Resistive load Resistive load (cos φ = 0., L/R = 7 ms) (cos φ = 0., L/R = 7 ms) (cos φ = 0., L/R = 7 ms) A at 220 VAC A at 2 VDC 2 A at 220 VAC 2 A at 2 VDC 3 A at 220 VAC 3 A at 2 VDC 0.8 A at 220 VAC. A at 2 VDC Rated carry current A 3 A 3 A 3 A at 220 VAC 3 A at 2 VDC Maximum contact voltage 2 VAC, 2 VDC 2 VAC, 2 VDC 2 VAC, 2 VDC Maximum contact current A 3 A 3 A Contact configuration DPDT, 3PDT PDT PDT Contact structure Single Single Bifurcated Contact materials Ag Au plating + Ag Au plating + Ag 0.8 A at 220 VAC. A at 2 VDC Type Standard models Ambient operating temperature * to 70 C Ambient operating humidity % to 8% * With no icing or condensation. 6

17 Characteristics Number of poles 2 or 3 poles poles poles, bifurcated contacts Contact * mω max. Operation time *2 Release time *2 Maximum Mechanical 8,000 operations/h operating frequency Rated load,800 operations/h Insulation *3 0 MΩ min. Between coil and contacts Between contacts of 2,000 VAC at /60 Hz for min. Dielectric different polarity strength Between contacts of the same polarity,000 VAC at /60 Hz for min. Vibration Shock Endurance Destruction to to Hz, -mm single amplitude (.0-mm double amplitude) Malfunction to to Hz, -mm single amplitude (.0-mm double amplitude) Destruction,000 m/s2 Malfunction 200 m/s 2 AC:,000,000 operations min. Mechanical DC: 0,000,000 operations min. (switching frequency: 8,000 operations/h) Electrical * 0,000 operations min. (rated load, switching frequency:,800 operations/h) 200,000 operations min. (rated load, switching frequency:,800 operations/h) AC: 20,000,000 operations min. (switching frequency: 8,000 operations/h) 0,000 operations min. (rated load, switching frequency:,800 operations/h) Number of poles 2 or 3 poles poles poles, bifurcated contacts Failure rate P value (reference value) * ma at VDC ma at VDC 0 µa at VDC Weight Approx. 3 g Note: These are initial values. *. Measurement conditions: A at VDC using the voltage drop method *2. Measurement conditions: With rated operating power applied. Ambient temperature condition: 23 C *3. Measurement conditions: For 0 VDC applied to the same location as for dielectric strength measurement. *. Ambient temperature condition: 23 C *. This value was measured at a switching frequency of 20 operations per minute. Dimensions (Unit: mm) Relays with PCB Terminals MY@-02 PCB Processing Dimensions (Bottom View) 3. 2 poles 3 poles poles (2.6)* The figures and dimensions given here are for the MY-02. The 2-pole and 3-pole models conform to these dimensions. 36 max. 28 max max. *Dimensions in parentheses are for the MY-02. Eight,.3-dia. ±0. holes Fourteen,.3-dia. ±0. holes 3.7 Eleven,.3-dia. ±0. holes Note:. The dimensional tolerance is ± Refer to the terminal arrangement and internal connections diagrams for the MY2, MY3, MY, and MYZ. 7

18 Case-surface-mounting Relays: Ordering Information Refer to the standards certifications and compliance section of your OMRON website for the latest information on certified models. Number of poles Classification Model 2 poles 3 poles poles Note:. Ask your OMRON representative for details on the time required to deliver made-to-order products. 2. Ask your OMRON representative for details on product specifications and the ability to manufacture products with voltages other than the above coil specifications. Ratings and Specifications Ratings Operating Coil (Standard Models) Note:. The rated current and coil are measured at a coil temperature of 23 C with tolerances of +%/ 20% for the AC rated current and ±% for the DC coil. 2. The AC coil and inductance values are reference values only. 3. Operating characteristics were measured at a coil temperature of 23 C.. The maximum voltage capacity was measured at an ambient temperature of 23 C. *. There is variation between products, but actual values are 80% max. To ensure operation, apply at least 80% of the rated value *2. There is variation between products, but actual values are 30% minimum for AC and % minimum for DC. To ensure release, use a value that is lower than the specified value. Contact Ratings Models with single contacts Models with single contacts Models with single contacts Bifurcated contacts MY2F MY3F MYF MYZF Rated current (ma) Coil Coil inductance (H) Rated Hz 60 Hz (Ω) Armature OFF Armature ON AC DC Rated load /.7/2.9 / 3, /20 9.9/.8 8./9.2, / /6.8.3/.8 2, /20.8/.3.2/.6 8, , / 9./, Rated Standard products Made-to-order items 2, /, 0/20 or 200/220 VAC 220/20 VAC 2 or 2 VDC 8 or 0/ VDC 0/ VAC 2 or 200/220 VAC or 0/ VDC 0/ or 200/220 VAC 2 or /20 VAC 2 or 2 VDC 8 or 0/ VDC 200/220 VAC or 2 VDC Must-operate 80% max. * Release 30% min. *2 Maximum % of rated voltage Power consumption (VA, W) Approx..0 to.2 Approx. 0.9 to. % min. *2 Approx. 0.9 Number of poles 2 or 3 poles poles Load Inductive load Inductive load Resistive load Resistive load (cos φ = 0., L/R = 7 ms) (cos φ = 0., L/R = 7 ms) A at 220 VAC A at 2 VDC 2 A at 220 VAC 2 A at 2 VDC 3 A at 220 VAC 3 A at 2 VDC Rated carry current A 3 A Maximum contact voltage 2 VAC, 2 VDC 2 VAC, 2 VDC Maximum contact current A 3 A Contact configuration DPDT, 3PDT PDT Contact structure Single Single Contact materials Ag Au plating + Ag 0.8 A at 220 VAC. A at 2 VDC Type Standard models Ambient operating temperature * to 70 C Ambient operating humidity % to 8% * With no icing or condensation. 8

19 Characteristics Number of poles 2 or 3 poles poles Contact * mω max. Operation time *2 Release time *2 Maximum Mechanical 8,000 operations/h operating frequency Rated load,800 operations/h Insulation *3 0 MΩ min. Between coil and contacts Between contacts of 2,000 VAC at /60 Hz for min. Dielectric different polarity strength Between contacts of the same polarity,000 VAC at /60 Hz for min. Vibration Shock Endurance Destruction to to Hz, -mm single amplitude (.0-mm double amplitude) Malfunction to to Hz, -mm single amplitude (.0-mm double amplitude) Destruction,000 m/s 2 Malfunction 200 m/s 2 Mechanical Electrical * AC:,000,000 operations min. DC: 0,000,000 operations min. (switching frequency: 8,000 operations/h) 0,000 operations min. (rated load, switching frequency:,800 operations/h) 200,000 operations min. (rated load, switching frequency:,800 operations/h) Number of poles 2 or 3 poles poles Failure rate P value (reference value) ma at VDC ma at VDC Weight Approx. 3 g Note: These are initial values. *. Measurement conditions: A at VDC using the voltage drop method *2. Measurement conditions: With rated operating power applied. Ambient temperature condition: 23 C *3. Measurement conditions: For 0 VDC applied to the same location as for dielectric strength measurement. *. Ambient temperature condition: 23 C *. This value was measured at a switching frequency of 20 operations per minute. Dimensions (Unit: mm) Case-surface mounting MY@F 2.6 Mounting Hole Dimensions 2 Fourteen,.2-dia. 2.2 oval holes Two, 3.-dia. holes or M3 screw holes 38 ± max. 38 max. The above figure is for the MYF. 36 max max. poles, bifurcated contacts The -pole, 2-pole, and 3-pole models conform to these dimensions. Note: Refer to the terminal arrangement and internal connections diagrams for the MY2, MY3, MY, and MYZ. 9

20 Engineering Data MY2, MY3, MY, MYZ, and Engineering Data Maximum Switching Capacity MY2 and MY3 0. DC resistive load DC inductive load (L/R = 7 ms) AC resistive load AC inductive load (cos φ = 0.) Endurance Curve MY2 and MY3 Number of operations ( operations) 0 0 VAC resistive load 220 VAC resistive load 2 VDC resistive load MY2 and MY3 Number of operations ( operations) 0 0 VAC inductive load (cos φ = 0.) 2 VDC inductive load (L/R = 7 ms) MY 220 VAC inductive load (cos φ = 0.) Contact MY and MYZ MY MY DC resistive load DC inductive load (L/R = 7 ms) AC resistive load AC inductive load (cos φ = 0.) Number of operations ( operations) VDC resistive load VAC resistive load 220 VAC resistive load Number of operations ( operations) VAC inductive load (cos φ = 0.) VAC inductive load (cos φ = 0.) 30 VDC inductive load (L/R = 7 ms) 0 0 Contact MYZ MYZ 0.0. Number of operations ( operations) VAC resistive load Number of operations ( operations) 0 0 VAC inductive load (cos φ = 0.) 2 VDC inductive load (L/R = 7 ms) 2 VDC resistive load 220 VAC inductive load (cos φ = 0.)

21 Ambient Temperature vs. Ambient Temperature vs. Coil Temperature Rise Must-operate and Must-release Voltage MY2 AC Models MY2 AC Models, Hz MY2 DC Models Must-operate/must-release voltage (%) Number of Relays: (average value) MY2 DC Models MY AC Models, Hz MY DC Models Must-operate/must-release voltage (%) MY AC Models Must-operate/must-release voltage (%) MY DC Models Must-operate/must-release voltage (%) Must-operate voltage Must-release voltage Ambient temperature ( C) Number of Relays: (average value) Must-operate voltage Must-release voltage Ambient temperature ( C) Number of Relays: (average value) Number of Relays: (average value) Must-operate voltage Must-release voltage Ambient temperature ( C) Must-operate voltage Must-release voltage Ambient temperature ( C) Temperature rise ( C) Temperature rise ( C) A contact current 2 circuits No contact current When rated voltage is applied Operating temperature limit value (E-class insulation, 20 C) 2. A contact current 2 circuits A contact current circuits No contact current Ambient temperature ( C) When rated voltage is applied Operating temperature limit value (E-class insulation, 20 C). A contact current circuits Ambient temperature ( C) Models with built-in diodes The diode absorbs surge from the coil. This type is best suited for applications with semiconductor circuits. With Diode Without Diode Note:. Make sure that the polarity is correct. 2. The release time will increase, but the 20-ms specification for standard models is satisfied. 3. Diode properties:the diode has a reversed dielectric strength of,000 V. Forward current: A Models with Built-in CR Circuits With CR 200 AC ON 2 VDC 9. ms A C = μf R = 6.8 kω A Di A A OFF To digital memory 282 V 80 V.2 ms Temperature rise ( C) Temperature rise ( C) Without CR A contact current 2 circuits No contact current When rated voltage is applied Operating temperature limit value (E-class insulation, 20 C) 2. A contact current 2 circuits A contact current circuits 0. A contact current circuits No contact current Ambient temperature ( C) When rated voltage is applied Operating temperature limit value (E-class insulation, 20 C) VDC 200 AC ON A To digital memory A A To digital memory scope A Ambient temperature ( C) 0 V OFF 282 V 2. msec 600 V 2

22 Engineering Data MY(S) Engineering Data Maximum Switching Capacity MY2(S) Endurance Curve MY2(S) MY2(S) AC resistive load DC inductive load (L/R = 7) DC resistive load AC inductive load (cos φ = 0.) Number of operations ( 3 operations),000,000 3,000, VDC resistive load 2 VAC resistive load 2 VAC resistive load 30 VDC resistive load Number of operations ( 3 operations),000,000 3,000, VDC inductive load 2 VAC inductive load 2 VAC inductive load 30 VDC inductive load Contact MY(S) and MYZ(S) MY(S) MY(S) AC resistive load DC inductive load (L/R = 7) AC inductive load (cos φ = 0.) DC resistive load Number of operations ( 3 operations),000,000 3,000, VAC resistive load 30 VDC resistive load 30 VDC resistive load 2 VAC resistive load Number of operations ( 3 operations) 0 2 3,000,000 3,000, VAC inductive load 30 VDC inductive load 2 VAC inductive load 30 VDC inductive load Contact MYZ(S) Number of operations ( 3 operations) 0 2 3,000,000 3,000, VAC resistive load 30 VDC resistive load 2 VAC resistive load 30 VDC resistive load MYZ(S) Number of operations ( 3 operations) 0. 2,000,000 3,000, VAC inductive load 30 VDC inductive load 2 VAC inductive load 30 VDC inductive load 0. 2 Common Specifications for MY2, MY3, MY, MYZ, MY@-02, MY@F, and MY(S) Malfunctioning Shock Energized Not energized X Y 00 2 Z' N = 20 Measurement: Shock was applied 3 times each in 6 directions along 3 axes with the Relay energized and not energized to check the shock values that cause the Relay to malfunction. Criteria: Non-energized: 200 m/s 2, Energized: 200 m/s 2 Shock direction Z X' 600 Unit: m/s 2 Y' 22

23 Detailed Information on Models Certified for Safety Standards, MY2Z, MY3, and Refer to Model Number Structure on page for a list of applicable models. The standard models are certified for UL and CSA standards. The rated values for safety standard certification are not the same as individually defined performance values. Always check the specifications before use. TUV-certified Models (File No. R03009) Model MY@ Coil ratings 6 to 2 VDC 6 to 20 VDC Number Contact ratings of poles 2 A, 2 VAC (cos φ =.0) A, 2 VAC (cos φ =.0) A, 2 VAC (cos φ = 0.) 3 A, 20 VAC (cos φ =.0) 0.8 A, 20 VAC (cos φ = 0.) UL-certified Models (File No. E) Model MY Coil ratings 6 to 20 VAC 6 to 2 VDC Number Contact ratings of poles 7A, 20 VAC (General Use) 7A, 2 VDC (Resistive) A, 20 VAC (General Use) A, 2 VAC (Resistive) A, 30 VDC (Resistive) 2 3A, 26 VAC (Resistive) /6HP, 2 VAC /8HP, 26 VAC /HP, 20 VAC 3 Certified number of operations,000 operations Certified number of operations 6,000,000 B300 Pilot Duty 6,000 A, 28 VDC (Resistive) 6,000 A, 20 VAC (General Use) /6 HP, 2 VAC,000 A, 28 VDC (General Use) (Same polarity) A, 20 VAC (General Use) (Same polarity) A, 30 VDC (Resistive) 6,000 (Same polarity) A, 2 VAC (Resistive) (Same polarity) 0.2A, 20 VDC (Resistive) (Same polarity) /6HP, 2 VAC (Same polarity),000 /HP, 20 VAC (Same polarity) B300 Pilot Duty 6,000 (Same polarity) CSA-certified Models (File No. LR3928) Model MY Coil ratings 6 to 20 VAC 6 to 2 VDC Number Contact ratings of poles 7A, 20 VAC (Resistive) 7A, 2 VDC (Resistive) A, 20 VAC (General Use) 2 A, 2 VAC (Resistive) A, 30 VDC (Resistive) /6HP, 2 VAC /HP, 20 VAC A, 28 VDC (Resistive) 7A, 20 VAC (General Use) 3 7A, 2 VDC (Resistive) A, 20 VAC (General Use) When ordering models that are certified for Lloyd s Register (LR) Standards, be sure to specify LR-certified Model with your order. LR-certified Models (File No. 90/270) Model MY@ Coil ratings 6 to 20 VAC 6 to 2 VDC Certified number of operations 6,000,000 6,000 /6HP, 2 VAC,000 7A, 20 VAC (General Use) (Same polarity) 7A, 2 VDC (Resistive) (Same polarity) A, 20 VAC (General Use) (Same polarity) A, 30 VDC (Resistive) A, 2 VAC (Resistive) (Same polarity) 0.2A, 20 VDC (Resistive) /6HP, 2 VAC /HP, 20 VAC Number of poles 2 Contact ratings 6,000,000 2 A, 30 VDC inductive load 2 A, 200 VAC inductive load. A, 30 VDC inductive load 0.8 A, 200 VAC inductive load. A, VAC inductive load 23