Product Catalogue Edition 3

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Product Catalogue Edition 3"

Transcription

1 Product Catalogue Edition 3

2 About Us Carlyle Metal Goods is under the ownership of Carlyle Bus & Coach Ltd. We provide an aluminium extrusion and sheet stockholding service to a variety of industries. This is supported by a fully equiped fabrication facility at our West Bromwich site which is capable of everything from large frameworks, right down to one-offs and prototypes. We have guillotines that can cut up to 3m lengths and 6mm thick plus saws for both aluminium and mild steels. We have press brakes with a capacity of 100 tonnes, and welding facilities are also available. We stock a range of products including polished, powder coated, anodised and mill finish extrusions, we also stock pneumatic cylinder tube. Stocks of various extrusions, sections, sheet, tubes, bar and much more allow CMG to supply without the need to impose minimum order quantities. Our delivery service includes same/following day via our own transport. We also have 6 branches in the UK and Ireland who can distribute customer orders. Copyright Carlyle Metal Goods

3 Section 1 Aluminium Sheet Aluminium Stock Sizes Section 2 Aluminium Tubes Profiles Round Pneumatic Stainless Steel Section Channel Cope Mouldings Equal Angle Flat Bar Fluted Edge & Nosings Gutter Mouldings Lap Plate Mouldings Miscellaneous Mouldings Rectangular Tube Round Bar Round Tube Square Bar Square Tube Tee Unequal Angle Wallboard Sections Shopfitting Section 4 Sheet & Tread Plating Patterned Plain Sheet

4 Section 1 Aluminium Stock Sizes Section 1.1

5 Section 2 Aluminium Tubes Profiles Round Section 2.1

6 Section 2 Aluminium Tubes Profiles Pneumatic Section 2.2

7 Section 2 Aluminium Tubes Profiles Stainless Steel Section 2.3

8 Channel Section 3.1

9 Cope Mouldings Section 3.2

10 Equal Angle Section 3.3

11 Flat Bar Section 3.4

12 Fluted Edge & Nosings Section 3.5

13 Gutter Mouldings Section 3.6

14 Lap Plate Mouldings Section 3.7

15 Miscellaneous Section 3.8

16 Mouldings Half Round Double Feather Edge Double Bevelled Edge MG kg/m Edge Mouldings MG kg/m Cover Mouldings Section 3.9

17 Rectangular Tube Section 3.10

18 Round Bar Section 3.11

19 Round Tube Section 3.12

20 Square Bar Section 3.13

21 Square Tube Section 3.14

22 Tee Section 3.15

23 Unequal Angle Section 3.16

24 Wallboard Sections Edge Trim Continual Run Internal Corner External Corner Section 3.17

25 Shopfitting - Wallboard Lining Sections Mill finish aluminium extrusions. Cut as required and availble in paint, polished or anodised finish - for lined fixing of wall boards. Section 3.18

26 Section 4 Sheet & Tread Plating Patterned Fivebar Stucco Section 4.1

27 Section 4 Sheet & Tread Plating Plain Sheet Section 4.2

28 Address: Carlyle Business Park, Great Bridge Street, Swan Village, West Bromwich, West Midlands B70 0XA Tel: In line with our policy of continuous product development, Carlyle Metal Goods reserves the right to amend the contents of this catalogue without notice. Whilst every care has been taken during the creation of this catalogue Carlyle Metal Goods cannot accept legal liability for any errors or omissions. Illustrations are intended only to be representative of the parts offered. Sizes stated are nominal. Copyright Carlyle Metal Goods

Introduction to M G Metals

Introduction to M G Metals Introduction to M G Metals M G Metals have over 50 years experience in the metal industry with a dedicated sales team trained in design, production and stockholding. We specialise in sales and customer

More information

Products Catalogue - Current Section

Products Catalogue - Current Section Structural & Decorative Tube Bar & Sections Seamless Tube Hygienic Tube Structural & Decorative Tube Aluminium Butt Weld Fittings Hygienic Fittings Architectural Stainless Steel Rolled Products Mirror

More information

Stainless Steel Section...

Stainless Steel Section... Structural & Decorative Tube Bar & Sections Seamless Tube Hygienic Tube Structural & Decorative Tube Aluminium Butt Weld Fittings Hygienic Fittings Architectural Stainless Steel Rolled Products Mirror

More information

Panel length. Plan. 15 BSP socket. Panel width. Section

Panel length. Plan. 15 BSP socket. Panel width. Section Solray Ceiling Panel 4GC:S 4 Guillotined Edges, Steel Tubes High Security, Steel Faced Data Sheet 7-1 Panel length 14 SWG steel face plate Plan Section Panels to be complete with angle cleats at approximately

More information

Profiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa

Profiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard

More information

Brake Metal. Fabrication. Quality Consistency Service

Brake Metal. Fabrication. Quality Consistency Service Brake Metal Fabrication Quality Consistency Service Finishing Assembly BellPro Architectural, LLC is making a name for itself in the Glass and Glazing and construction industries by applying its 30 plus

More information

Eberl Iron Works, Inc.

Eberl Iron Works, Inc. Eberl Iron Works, Inc. Order Form Manual for Stair Pans, Stair Treads and Bent Plate NEW: VISIT US ONLINE AT WWW.STAIRPANS.COM Eberl Iron Works, Inc. 128 Sycamore St. Buffalo, NY 14204 Ph: 716-854-7633,

More information

Providing a 'Joined-Up' Service

Providing a 'Joined-Up' Service What We Do Precision Fabrications (up to 3 tonnes) and Sheet Metal Work (up to 4x2 metres) in Stainless Steel, Aluminium and Mild Steel. Specialists in supplying the Defense, Semi-conductor and Engineering

More information

HOT ROLLED ELECTRIC RESISTANCE WELDED (HREW) ROUND TUBING - ASTM A513 TYPE 1 Diameter Tolerances (inches)

HOT ROLLED ELECTRIC RESISTANCE WELDED (HREW) ROUND TUBING - ASTM A513 TYPE 1 Diameter Tolerances (inches) HOT ROLLED ELECTRIC RESISTANCE WELDED (HREW) ROUND TUBING - ASTM A513 TYPE 1 Diameter Tolerances (inches) NOTE: Measurements for diameter are to be taken at least 2 inches (a) from the ends of the tubes

More information

Buyers Guide: Information required:

Buyers Guide: Information required: Buyers Guide: Information required: When ordering, please state: 1 Reference Number of Mesh (include any alphabetical suffix) Conventional/Flattened Mesh Dimensions: 1. For conventional (raised) meshes

More information

TARIFF CODE and updates standard

TARIFF CODE and updates standard TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of

More information

Progressive, modern, innovative that s what Brunswick Steel is all about.

Progressive, modern, innovative that s what Brunswick Steel is all about. REFERENCE CATALOGUE Progressive, modern, innovative that s what Brunswick Steel is all about. Established in 1970 as a family owned business, Brunswick Steel initially began as a demolition and salvage

More information

Stainless Steel Tubular Products

Stainless Steel Tubular Products Stainless Steel Tubular Products r Disclaimer This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary

More information

3Pallet. Handling Conveyor. No.3of 7. Designed for flexibility and heavy duty usage - up to 1500kg per pallet

3Pallet. Handling Conveyor. No.3of 7. Designed for flexibility and heavy duty usage - up to 1500kg per pallet 3Pallet No.3of 7 Handling Conveyor Designed for flexibility and heavy duty usage - up to 1500kg per pallet 2 3 4 Belt Conveyor For careful and extremely low noise conveying. 1 Lineshaft Powered Roller

More information

Colonnade Security Pipe

Colonnade Security Pipe Description: Round & Square downpipe formed from extruded 6060 T4 aluminium in various sizes (Ø83mm, Ø108mm, 83x83 mm & 108x108mm*) & supplied with a complete range of accessories i.e. Offsets, bends,

More information

One stop shopping for any metal, cut and ready, fast!

One stop shopping for any metal, cut and ready, fast! ANGLES Data and Specifications 01 Aluminum Angles (Typically Rounded Corners) This is the most versatile of the heat treatable aluminum alloys. This alloy offers a wide range of mechanical properties and

More information

REHAU CABLE MANAGEMENT IT S IN THE FINISH. WWW.REHAUTRUNKING.CO.UK

REHAU CABLE MANAGEMENT IT S IN THE FINISH. WWW.REHAUTRUNKING.CO.UK REHAU CABLE MANAGEMENT IT S IN THE FINISH. WWW.REHAUTRUNKING.CO.UK This guide has been created to give you a quick reference to our range of quality trunking systems and their article numbers for easy

More information

STOCK LIST & BUYER S GUIDE

STOCK LIST & BUYER S GUIDE STOCK LIST & BUYER S GUIDE common Decimal equivalents 1/64 =.0156 1/32 =.0312 1/16 =.0625 3/32 =.0937 1/8 =.125 3/16 =.1875 7/32 =.2187 1/4 =.250 9/32 =.2812 5/16 =.3125 3/8 =.375 7/16 =.4375 1/2 =.500

More information

Installation Detailed installation instructions are provided which should be strictly followed.

Installation Detailed installation instructions are provided which should be strictly followed. Specification System 6 The Metal Technology Thermally-Broken Vertical Slide Window has been designed in such a way that its'attractive and clean lines will enhance all types of residential and commercial

More information

Sheet Metal Fabrication

Sheet Metal Fabrication Sheet Metal Fabrication Nu-Style Products Ltd Sheet Metal Fabrication Contents PAGE 4 Curved/Bull-nose 4 Louvres 4 Gutters 5 Rainwater Components 6 Soakers/Apertures 6 Rainscreen/Soffit & Fascia Panels

More information

Contents. Miscellaneous Standards. Architectural Systems. New (Since July 2012)

Contents. Miscellaneous Standards. Architectural Systems. New (Since July 2012) Contents Geometric Shapes Miscellaneous Standards Architectural Systems New (Since July 2012) G1 - G14 M1 - M8 A1 - A11 N1 Edition 8 - June 2014 Geometric Shapes G1 C A Angle B EA0280 16.00 16.00 1.50

More information

Fixed Vertical Access Ladders

Fixed Vertical Access Ladders Fixed Vertical Access Ladders Index 1. Fixed Vertical Access Ladders 2. Aluminium Fixed Vertical Access Ladders: Standard Specification 3. Aluminium Fixed Vertical Access Ladders: Technical Drawing 4.

More information

Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability

Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers

More information

AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels

AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels AISI No. 1008 1010 1012 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 10 1026 1027 1029 10 1035 1036 1037 1038 1039 10 1041 1042 1043

More information

Office / Furniture. Cable Covers & Keyboard Tray 16.2. Table Legs 16.3. Desk Locks 16.4. Casters & File Accessories 16.7. CD/DVD Holders 16.

Office / Furniture. Cable Covers & Keyboard Tray 16.2. Table Legs 16.3. Desk Locks 16.4. Casters & File Accessories 16.7. CD/DVD Holders 16. Cable Covers & Keyboard Tray 16.2 Table egs 16. Desk ocks 16.4 Casters & File Accessories 16.7 CD/DVD Holders 16.8 Furniture Feet 16.9 NOVER PRODUCT CATAOGUE 16.1 OFFICE/FURNITURE CABE COVERS & KEYBOARD

More information

Ref: GA13UK Glass Awning Support System

Ref: GA13UK Glass Awning Support System Ref: GA13UK Glass Awning Support System Give any entrance an uncomplicated, graceful look, enhancing the design of any building. Installation LAMINATED TOUGHENED GLASS High grade 316 stainless steel for

More information

The Kodiak 2400 Seating System by Royal Stewart Ltd.:

The Kodiak 2400 Seating System by Royal Stewart Ltd.: The Kodiak 2400 Seating System by Royal Stewart Ltd.: PART 1 GENERAL 1.1 Description Telescopic Bleacher Seating includes either manually or electrically operated systems of multiple tiered seating rows

More information

Industrial Catalog. Index

Industrial Catalog. Index Index Pg Description 2 Fixture Shapes 3 Tee Mouldings 4 Price Tag moulding 4 Plain Facing 5 CW Systems 8 Flatbar 9 U Channel 11 Angles 13 Caps, Coves & Dividers 17 Marine Metals & Facings 18 Finish Codes

More information

Incorporating V2.3. Product spec >>> > Series ECG - Egg Crate Grilles. > Series ECG45-45 Egg Crate Grilles

Incorporating V2.3. Product spec >>> > Series ECG - Egg Crate Grilles. > Series ECG45-45 Egg Crate Grilles Incorporating V2.3 Product spec >>> > Series ECG - Egg Crate Grilles > Series ECG45-45 Egg Crate Grilles Grilles Egg crate Recommended for: Wall, ceiling & duct Extract Overview Industry standard extract

More information

Extrusions ProCEssinG

Extrusions ProCEssinG Extrusions PROCESSING A POWERFUL GROUP ALUMERO extrusions provide long-lasting profile solutions for innovative ideas. We believe it is our job and our duty to provide individual advice in close cooperation

More information

Metal spiral stair kits as simple or as elegant as you like

Metal spiral stair kits as simple or as elegant as you like Metal spiral stair kits as simple or as elegant as you like Kit Details Kits may be installed either right or left hand up Kits also install easily against a balcony or deck Typical assembly time for the

More information

DEMIRSAN. w w w. d e m i r s a n m e t a l. c o m. t r Page 1

DEMIRSAN. w w w. d e m i r s a n m e t a l. c o m. t r Page 1 DEMIRSAN The foundation of our company had laid as a lathe workshop by Mr. Bekir Demir, in Karabağlar, at 1972 that had continue to operate in this way for a long time.after that our General Manager Mr.

More information

I-Line - Snap-On Feature

I-Line - Snap-On Feature Oct 2012 I-Line - Snap-On Feature DATA SHEET Snap-On features - Guaranteed truelines every time Bailey I-Line Snap-On is an architectural cladding feature offering creative possibilities for architects

More information

Pipe Pile. (800) 848-6249

Pipe Pile. (800) 848-6249 Pipe Pile Similar to H-Piles, Pipe Piles are also designed to transfer structural loads through the foundation to soils below. Where H-Piles are typically classified as point bearing, Pipe Piles are most

More information

Galvanized Pipe. Standard pipe is 16 gauge galvanized construction. Standard lengths are five feet and 20 feet. Heavier gauges are also available.

Galvanized Pipe. Standard pipe is 16 gauge galvanized construction. Standard lengths are five feet and 20 feet. Heavier gauges are also available. Galvanized Pipe Standard pipe is 16 gauge galvanized construction. Standard lengths are five feet and 20 feet. Heavier gauges are also available. Angle rings are needed to secure connections. See pages

More information

CALCULATION & DRAFTING STANDARDS MANUAL PROCEDURE: C&D 515 Bill of Materials Standard REV 0.0 5/6/04

CALCULATION & DRAFTING STANDARDS MANUAL PROCEDURE: C&D 515 Bill of Materials Standard REV 0.0 5/6/04 BROWN MINNEAPOLIS TANK PAGE 1 OF 7 PURPOSE: Create and Drawing Uniformity Create, explain, and establish a standard bill of materials to be placed on every drawing (except the overall tank elevation and

More information

SEMFWE232 SQA Unit Code H2BN 04 Cutting plate and sections using shearing machines

SEMFWE232 SQA Unit Code H2BN 04 Cutting plate and sections using shearing machines Overview This standard identifies the competencies you need for cutting and shaping metal plate and sections (3 mm thickness and above) for fabrications using guillotines and section cropping machines,

More information

HANDRAIL STANDARDS HANDRAILS AXESS LADDER SYSTEM KICK FLAT SYSTEM OPEN FLOORING

HANDRAIL STANDARDS HANDRAILS AXESS LADDER SYSTEM KICK FLAT SYSTEM OPEN FLOORING ENGINEERING LTD. HANDRAIL STANDARDS HANDRAILS AXESS LADDER SYSTEM KICK FLAT SYSTEM OPEN FLOORING Member of PF Group Guardrail Engineering Limited Manders Industrial Estate Old Heath Road Wolverhampton

More information

DMLS / SLM Metal 3D Printing.

DMLS / SLM Metal 3D Printing. DMLS / SLM Metal 3D Printing. An introductory design guide for our 3d printing in metal service. v2.2-8th July 2015 Pricing considerations. Part Volume. One of the biggest factors in the price for DMLS

More information

There is no upside to. down time

There is no upside to. down time EXPANDED and PERFORATED Data and Specifications 30 Similar to Type 302 with excellent mechanical properties, resistance to many corrosive agents. Useful where sanitation and cleanliness are important.

More information

Project Name: Reference: Specifier: Date:

Project Name: Reference: Specifier: Date: KALZIP NBS FORMAT (H31) OUTLINE SPECIFICATION Acoustic Purlin Roof Construction 0.20 w/m 2 K U-Value Project Name: Reference: Specifier: Date: H31 METAL PROFILED/FLAT SHEET CLADDING/COVERING To be read

More information

SECTION 4: Cable Ladder Stainless Steel & Aluminium

SECTION 4: Cable Ladder Stainless Steel & Aluminium SECTION 4: Cable Ladder & Aluminium Type 3/50 (NEMA 6A) Type 4/70L Type 5/112 (NEMA 20C) > 4:3 > 4:4 > 4:5 Aluminium Type 4/70A (NEMA 16B) Ladder Splice Plates > 4:7 > 3:18 Page 4:1 Cable Ladder General

More information

Handbook of Welded Carbon Steel Mechanical Tubing

Handbook of Welded Carbon Steel Mechanical Tubing Handbook of Welded Carbon Steel Mechanical Tubing HANDBOOK OF WELDED CARBON STEEL MECHANICAL TUBING STEEL TUBE INSTITUTE OF NORTH AMERICA 2000 Ponce de Leon, Suite 600, Coral Gables, FL 33134 Tel: (305)

More information

SPIRAL STAIRWAY ORDER GUIDE

SPIRAL STAIRWAY ORDER GUIDE Platform Style Style : Designed for use in a stairwell. The stairwell is assumed square unless specified round or otherwise. finial railing optional balcony railing alcony Railings These custom balcony

More information

Tolerance & conversion tables

Tolerance & conversion tables ArcelorMittal Europe Flat Products Tolerance & conversion tables In this section you will find designations and details of guarantees provided by ArcelorMittal in terms of tolerances in accordance with

More information

Structural welding is a process by which the parts that are to be connected are heated and

Structural welding is a process by which the parts that are to be connected are heated and CHAPTER 6. WELDED CONNECTIONS 6.1 INTRODUCTORY CONCEPTS Structural welding is a process by which the parts that are to be connected are heated and fused, with supplementary molten metal at the joint. A

More information

Pallet Handling Conveyors & Conveyor Systems. Including: Standard Range Customised Range

Pallet Handling Conveyors & Conveyor Systems. Including: Standard Range Customised Range iverbank ngineering CONVEYOR COLLECTION TODAY S PRODUCTS, TOMORROW S ENGINEERING Pallet Handling Conveyors & Conveyor Systems Including: Standard Range Customised Range Riverbank Engineering Ltd Unit 38,

More information

TECHNICAL MANUAL PIPECLAMP JULY 2013 ROHRVERBINDER ONLINESHOP.DE

TECHNICAL MANUAL PIPECLAMP JULY 2013 ROHRVERBINDER ONLINESHOP.DE TECHNICAL MANUAL PIPECLAMP JULY 2013 ROHRVERBINDER ONLINESHOP.DE Selecting a Fitting fittings are a blackheart malleable casting and are manufactured to BS EN 1562 1997 for the strength requirements. fittings

More information

PLASTIC VOLUME CONTROL DAMPERS OVERVIEW TYPE: GGB

PLASTIC VOLUME CONTROL DAMPERS OVERVIEW TYPE: GGB OVERVIEW TYPE: GGB All composite construction Rigid extruded upvc aerofoil blade section Integral blade seals for low leakage operation Individual blades driven via reinforced styrene gear wheels in maintenance

More information

Mechanical arms, belts and sheets

Mechanical arms, belts and sheets Car parks Mechanical arms, belts and sheets DETAIL ARM CAR PARK (mm) 5000 Platen 100x5mm Iron sheets 4mm 5000 485 2100 Belts type C 120x50x2 mm 4915 5400 Hot dipped galvanized UNE-EN ISO 1461 or black

More information

Module 29101-09 has no Performance Profile Sheet; no performance testing is required for this module.

Module 29101-09 has no Performance Profile Sheet; no performance testing is required for this module. Module 29101-09 has no Performance Profile Sheet; no performance testing is required for this module. PERFORMANCE PROFILE SHEET (PAGE 1 OF 2) NCCER TRAINING Craft: Welding Module Number: 29102-09 Module

More information

Spiral Duct Specifications

Spiral Duct Specifications Duct Specifications 9707 Williams Road Thonotosassa, FL 33592 Fax (813) 413-8377 Tel (813) 413-8230 Toll free (877) CDS DUCT 237-3828 SINGLE WALL All round spiral duct and fittings shall be manufactured

More information

The Plastic Injection Moulders. Furniture Fittings & Tube Inserts

The Plastic Injection Moulders. Furniture Fittings & Tube Inserts The Plastic Injection Moulders Furniture Fittings & Tube Inserts Contents Introduction Page 1 Square Inserts Page 2-3 Round Inserts Page 4-5 Rectangular Inserts Page 6-7 Domed and Shaped Inserts Page 8-9

More information

SECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)

SECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here) SECTION 08332 COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Counter Fire Doors. 1.2

More information

Installing Window and Door Mouldings

Installing Window and Door Mouldings Installing Window and Door Mouldings About Window and Door Mouldings The trim around windows and doors greatly influences the look and style of your interior. They also bridge the gaps and cover spaces

More information

DECIPHERING WELD SYMBOLS

DECIPHERING WELD SYMBOLS DECIPHERING WELD SYMBOLS When welds are specified on engineering and fabrication drawings, a cryptic set of symbols issued as a sort of shorthand for describing the type of weld, its size, and other processing

More information

TOTAL PACKAGE REELS, DRUMS AND ANCILLARIES

TOTAL PACKAGE REELS, DRUMS AND ANCILLARIES TOTAL PACKAGE REELS, DRUMS AND ANCILLARIES www.pentregroup.com HEARL HEATON ABS Plastic Flanged Process Reels HEARL HEATON, with over 40 years of experience, is the recognised leader in the design and

More information

LARGE CNC LATHE: DAEWOO TRAVEL: X-AXIS BED SWING IS 28 TRAVEL: Y-AXIS CARRIAGE IS 16 TRAVEL: Z-AXIS IS 156

LARGE CNC LATHE: DAEWOO TRAVEL: X-AXIS BED SWING IS 28 TRAVEL: Y-AXIS CARRIAGE IS 16 TRAVEL: Z-AXIS IS 156 LARGE CNC LATHE: DAEWOO TRAVEL: X-AXIS BED SWING IS 28 TRAVEL: Y-AXIS CARRIAGE IS 16 TRAVEL: Z-AXIS IS 156 LARGE HORIZONTAL BORING MILL: SCHARMANN CAPABLE OF BORING AND MILLING A VARIETY OF PARTS TO YOUR

More information

Oxford Design Lucci e Orlandini

Oxford Design Lucci e Orlandini Oxford Oxford Design Lucci e Orlandini This innovative desking solution is specifically designed to maximise the use of any given space. The combination of tip-up seats and tablets facilitates reduced

More information

BOQ SPECIFICATIONS. The Blind system consist of a coated aluminium tube of 38 mm diameter with provision of fabric clamping.

BOQ SPECIFICATIONS. The Blind system consist of a coated aluminium tube of 38 mm diameter with provision of fabric clamping. BOQ SPECIFICATIONS VERTICAL BLINDS Vertical Blinds made of glass fibre fabrics in width 5 (or 4 ). Minimum overlapping of ¾ in fabric. Top aluminium anodized rail of 1.4 mm thickness. 2 inch wide channel

More information

Flash Butt Welding Machines

Flash Butt Welding Machines Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process

More information

UNIVERSAL RAILING, STEEL

UNIVERSAL RAILING, STEEL RAILINGS Page Universal Railing, steel 108-109 Large Module Railing, steel 110-111 Allround Railing, aluminium 112-113 Module Railing, aluminium 114-115 Standard Type Railing, aluminium 116-117 107 UNIVERSAL

More information

specifications A*COM SYSTEM bridging the gap. A*COM Commercial Ramp System PART 1 General

specifications A*COM SYSTEM bridging the gap.  A*COM Commercial Ramp System PART 1 General specifications A*COM Commercial Ramp System This section is based on products manufactured by A*COM and distributed by AlumiRamp, Inc., located at the following address: 855 Chicago Road, Quincy, MI 49082,

More information

COASTAL SERIES. 316 Solid Stainless Steel Door Furniture

COASTAL SERIES. 316 Solid Stainless Steel Door Furniture COASTAL SERIES 316 Solid Stainless Steel Door Furniture DORMA COASTAL SERIES SOLID STAINLESS STEEL ROSE AND PLATE DOOR FURNITURE DORMA in Australia and New Zealand is developing into a leading manufacturer

More information

FORMAL TECHNICAL OPINION

FORMAL TECHNICAL OPINION Jon S. Corzine Governor Issued: March 1985 Revised: June 2001 Code Ref. Update: January 2011 State of New Jersey Department of Community Affairs Division of Codes and Standards PO Box 802 Trenton, New

More information

Quarry & Recycling Products

Quarry & Recycling Products Quarry & Recycling Products CONTENTS Woven mesh screens Perforated screen plates Rubber & Polyurethane screens Walkways & Steps Ordering Information Further Information PAGE 3 6 8 9 10 11 Graepel has a

More information

TECHNICAL SPECIFICATIONS FOR BARE LINEPIPE FOR FIREWATER SERVICE

TECHNICAL SPECIFICATIONS FOR BARE LINEPIPE FOR FIREWATER SERVICE TECHNICAL SPECIFICATIONS FOR BARE LINEPIPE FOR FIREWATER SERVICE A) IS: 3589 GRADE FE 330 This tender specification establishes the minimum requirements for the manufacture of IS: 3589 Grade Fe330 Bare

More information

National Robotic Arc Welding Conference and Exhibition

National Robotic Arc Welding Conference and Exhibition National Robotic Arc Welding Conference and Exhibition AWS FMA Jim Colt Applications Technology Manager Recent Technology enhancements that allow for easier robotic integration Relative Process Technology

More information

FULL SERVICE SUPPLIER OF CORROSION RESISTANT METALS SINCE

FULL SERVICE SUPPLIER OF CORROSION RESISTANT METALS SINCE STOCK LIST SHEET PLATE COIL PIPE TUBE ROD BAR FLANGES EXTRUSIONS ALUMINUM BRASS BRONZE COPPER COPPER-NICKEL STAINLESS STEEL FULL SERVICE SUPPLIER OF CORROSION RESISTANT METALS SINCE 1913 Vancouver, BC

More information

Edition 2 STAIRCASES, BALUSTRADING, BALCONIES & CANOPIES

Edition 2 STAIRCASES, BALUSTRADING, BALCONIES & CANOPIES Edition 2 STAIRCASES, BALUSTRADING, BALCONIES & CANOPIES Introduction Contents Staircases and Balustrading 2 11 Helical Staircases and Balustrading 12 15 Spiral Staircases and Balustrading 16 18 Balustrading

More information

Section 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1

Section 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1 Section 7 Socket Weld and Threaded Fittings This Section contains dimension and tolerance information extracted from American and British specifications applicable to socket weld and threaded fittings.

More information

Jordan Manufacturing Limited. Laser Centre. Aluminium Boat Kits

Jordan Manufacturing Limited. Laser Centre. Aluminium Boat Kits JORDAN M A N U F A C T U R I N G L I M I T E D 14 Millbrook Road Yate, Bristol BS37 5JW Telephone 01454 328300 Facsimile 01454 322659 E-mail: laser@jordanengineering.co.uk Web sites www.jordanlaser.supanet.com

More information

Best Barns USA Assembly Book

Best Barns USA Assembly Book Best Barns USA Assembly Book Revised November 27, 2013 the Easton - R 12'x 20' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This manual is copyrighted.

More information

P.O. Box 474039, Dubai, UAE Tel: +971 4 884 1650 Fax: +971 4 884 1934 E-mail: sales@intermetal.com www.intermetal.com 09 15 Laps TM laps TM collection laps TM edging Laps TM is a series of stackable Luxury

More information

THE IDEAL SOLUTION SHELVING. Sales Telephone: 01553 765205 Sales Fax: 01553 768464 Email: sales@eais-foodservice.co.uk

THE IDEAL SOLUTION SHELVING. Sales Telephone: 01553 765205 Sales Fax: 01553 768464 Email: sales@eais-foodservice.co.uk THE IDEAL SOLUTION Sales Telephone: 01553 765205 Sales Fax: 01553 768464 Email: sales@eais-foodservice.co.uk EZ STORE Bright Chrome Wire System g Bright Chrome wire shelves Heights 3 tier = 1650mm standard

More information

Mission Statement. State Steel strives to provide quality products and services at competitive

Mission Statement. State Steel strives to provide quality products and services at competitive Mission Statement State Steel strives to provide quality products and services at competitive prices. This commitment is demonstrated with several branch locations all offering large, diverse inventories

More information

Reliable Metal Bending

Reliable Metal Bending Reliable Metal Bending Since 1984 Welcome to Bendpro CNC Mandrel Bending Our commitment to you... P3 Accuracy Guaranteed Quick response quotes F.I.S. freight inclusive pricing Short lead-times 25+ years

More information

1.2.1 1.1.8 PRODUCTBLADEN GT ROCKPANEL STRUCTURE

1.2.1 1.1.8 PRODUCTBLADEN GT ROCKPANEL STRUCTURE 1..1 1.1.8 PRODUCTBLADEN SHEETS GT page 1 to 6 Rockpanel Structure is a very durable panel with a lightly textured finish, specially developed for use in cladding, fascia, soffit applications. The basic

More information

PVC-U Domestic and general trunking

PVC-U Domestic and general trunking PVC-U Domestic and general trunking w w w. m a r s h a l l - t u f f l e x. c o m A range of cost-effective PVC-U cable containment for domestic and general wiring installations. 146 Introduction PVC-U

More information

Installation Instructions and Ordering Information

Installation Instructions and Ordering Information The Flush Finish Trimless Door Frame Installation Instructions and Ordering Information CLEAN LINES! The Flush Finish Door Jamb System Manufactured by STUDCO Building Systems Step 1 Verify if you are using

More information

FLASHMAN WINDOW AND DOOR FLASHING SYSTEM. Product. Scope. Appraisal No. 573 [2013]

FLASHMAN WINDOW AND DOOR FLASHING SYSTEM. Product. Scope. Appraisal No. 573 [2013] FLASHMAN WINDOW AND DOOR FLASHING SYSTEM This Appraisal replaces BRANZ Appraisal No. 573 (2007). Amended 05 February 2016. BRANZ Appraisals Technical Assessments of products for building and construction.

More information

Rose Door Handles. We take the worry out of protecting what s valuable to you. Lockwood: no worries. www.lockweb.com.au

Rose Door Handles. We take the worry out of protecting what s valuable to you. Lockwood: no worries. www.lockweb.com.au Rose Door Handles We take the worry out of protecting what s valuable to you. Lockwood: no worries www.lockweb.com.au Contents Robert Watson Series 20 Symphony Series 1420 Symphony Series 1360 Series Door

More information

SECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)

SECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here) SECTION 08332 COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Counter Fire Doors. 1.2

More information

V-joint fascia soffit systems

V-joint fascia soffit systems V-joint fascia systems CI/SfB October 2005 (4-) Uniclass L5294 extruded aluminium system with complete versatility for eaves and other building features Bailey V-Joint and fascia system has been designed

More information

The Keep It Simple, Steel (KISS) Standard

The Keep It Simple, Steel (KISS) Standard The Keep It Simple, Steel (KISS) Standard A standard Electronic Data Interchange (EDI) format for the exchange of Bill of Material (BOM) information within the steel fabrication industry Updated in March

More information

Basic Principles & Common Practices

Basic Principles & Common Practices DETAILING STAIRS: Basic Principles & Common Practices Figure 1: Stair Terminology By Andrew J. Bellerby This article is designed to provide an introduction to detailing stairs. It explains the basic principles

More information

Signfix is a product line and brand of BAND-IT IDEX, INC.

Signfix is a product line and brand of BAND-IT IDEX, INC. Signfix is a product line and brand of BAND-IT IDEX, INC. SIGNFIX Product Overview SIGNFIX Modular Sign Support Systems conform to AASHTO standards within LTS-4-12 (2001), Standards Specifications for

More information

Cable & Rod Displays DELIVERY NEXT DAY

Cable & Rod Displays DELIVERY NEXT DAY 4 Cable & Rod Displays LED Cable Kits 48 Cable Poster Kits 49-50 Freestanding Cable Poster Kits 51 Cable Fixings 5-5 Rod Fixings 54-55 Cable/Rod Acrylic Accessories 56 Cable/Rod Poster Pocket Accessories

More information

EVEN FOR SMALL QUANTITIES WE GET STARTED RIGHT AWAY...

EVEN FOR SMALL QUANTITIES WE GET STARTED RIGHT AWAY... EVEN FOR SMALL QUANTITIES WE GET STARTED RIGHT AWAY... Because we produce in-house, so we don t have far to go. Our decisions are not based on when and who can do what in Asia; instead, we look at what

More information

Ladder Shelf Plans Final dimensions: 25 L x 21 W x 72 H

Ladder Shelf Plans Final dimensions: 25 L x 21 W x 72 H Ladder Shelf Plans Final dimensions: 25 L x 21 W x 72 H Copyright 2011. MLCS Woodworking. Page 1 Router bits and supplies needed: 3/8 Rabbeting bit (#10691) 1 Bottom Cleaning bit (#7941) Top and Bottom

More information

Graph Wall Cladding System. A. Scope: Section includes, but is not limited to, architectural wall cladding system. B.

Graph Wall Cladding System. A. Scope: Section includes, but is not limited to, architectural wall cladding system. B. September, 2009 Section 09 77 00 Graph Wall Cladding System PART 1 - GENERAL 1.1 SUMMARY A. Scope: Section includes, but is not limited to, architectural wall cladding system including trims, terminations,

More information

DIE SETS - MACHINED PLATES ACCORDING TO DRAWING CONTENTS

DIE SETS - MACHINED PLATES ACCORDING TO DRAWING CONTENTS DIE SETS MACHINED PLATES ACCORDING TO DRAWING CONTENTS Page MACHINE CAPACITIES 2.02 SPECIAL DIE SETS 2.032.07 MDL GEOMETRIC STANDARDS 2.08 DIMENSIONING INSTRUCTIONS FOR SPECIAL 2.09 RECTANGULAR DIE SETS

More information

SAF EXTRUSIONS CATALOG 08

SAF EXTRUSIONS CATALOG 08 SAF EXTRUSIONS CATALOG 08 ALUMINUM EXTRUSIONS-ALL SHAPES POPULAR SHEET ITEMS MOST ITEMS NOW AVAILABLE IN OUR CALIFORNIA BRANCH! SPEEDIEST SERVICE IN THE INDUSTRY East: 800-241-7429 West: 866-660-6627 -One

More information

Linear Motion & Assembly Technologies - Guarding System

Linear Motion & Assembly Technologies - Guarding System Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Linear Motion & Assembly Technologies - Guarding System EcoSafe Guarding System from Rexroth Guarding

More information

Technology Design Task

Technology Design Task Technology Design Task -Artefact Production- Design Task Artefact A number of factors can be considered in influencing the extent to which the completed artefact fully satisfies the chosen design brief

More information

DENVER MODEL 30 X 30 SPECIFICATIONS

DENVER MODEL 30 X 30 SPECIFICATIONS DENVER MODEL 30 X 30 SPECIFICATIONS Dimensions: Roof Dimensions 30-0 x 30-0 (4) Columns (Center to Center) 25-6½ x 25-6½ Minimum Clearance 8-0 Roof Height @ Peak Dependent on Col. Ht. Hip Roof 4:12 pitch

More information

Reliable. Responsive. Reliable. Responsive. Reliable. Responsive. Reliable. Responsive. Reliable. Responsive. Reliable. Responsive.

Reliable. Responsive. Reliable. Responsive. Reliable. Responsive. Reliable. Responsive. Reliable. Responsive. Reliable. Responsive. Reliable. Responsive. Reliable. Responsive. Reliable. Responsive. Reliable. Responsive. Reliable. Responsive. Reliable. Responsive. Floor Covering Trims Carpet Metal Trims / Tile Trims / Vinyl Trims COVENTRY

More information

SECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE

SECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE SECTION 15076 CEMENT-MORTAR LINED AND COATED (CML&C) STEEL PIPE PART 1 GENERAL 1.01 DESCRIPTION This section designates the requirements for steel pipe fabrication, test in shop, installation of steel

More information

Price list (VAT inclusive)march 2015

Price list (VAT inclusive)march 2015 Price list (VAT inclusive)march 2015 *Prices correct at time of printing, not guaranteed for any fixed period. Please contact us by phone 01325 381300 or fax 01325 381300 or e-mail: sales@m-machine.co.uk

More information

North American Stainless

North American Stainless North American Stainless Flat Products Stainless Steel Grade Sheet 430 (S43000)/ EN 1.4016 Introduction: SS430 is a low-carbon plain chromium, ferritic stainless steel without any stabilization of carbon

More information