Medical Devices. TÜV SÜD Akademie GmbH. Professional Training for the Medical Engineering Sector. Modular Qualifications and Seminars
|
|
- Homer Jenkins
- 7 years ago
- Views:
Transcription
1 Medical Devices Professional Training for the Medical Engineering Sector Modular Qualifications and Seminars TÜV SÜD Akademie GmbH
2 Experience, Expertise and Innovation for the Medical Device Industry Dear Sir or Madam, The Hamburg Institute of International Economics forecasts that by 2020 the demand for medical devices will have increased by an annual 4% in the USA and Western Europe, by 8% in Eastern Europe and by more than 10% in China and India. However, this fast-growing market lacks skilled specialists. Manufacturers of medical devices wishing to place their products on the market must overcome particularly high obstacles. Approval procedures are complex and differ significantly across non-eu markets. In particular, there is a scarcity of specialists with the ability to help new medical devices to navigate the jungle of very diverse international approval procedures. TÜV SÜD Academy provides support, offering modular qualifications and seminars: Manager Regulatory Affairs International TÜV Specialist Medical Software TÜV Safety Expert (Non-) Active Medical Devices TÜV All seminars are offered individually or as intensive seminars on request, also as customized training and in-house training. Our programme also covers further topics related to medical devices. Workshop and consulting packages are also available on demand. Kind regards, Birgit Klusmeier TÜV SÜD Akademie Anita Lenzser TÜV SÜD Akademie 2
3 Registration of medical devices on international markets Modular Qualification: Manager Regulatory Affairs International TÜV Certificate: Manager Regulatory Affairs International TÜV after successful completion of the foundation and advanced modules Registration of Medical Devices in the Middle and Far East Registration of Medical Devices Outside the EU Registration of Medical Devices in the USA Foundation and Advanced Courses US FDA QM Requirements in Accordance with 21 CFR 820 QSReg/GMP in Comparison to Europe Certificate of Manager Regulatory Affairs TÜV Certificate of Specialist Management Systems TÜV Management Systems for Medical Device Manufactures Objektive Advanced Modules Objektive Objektive Advanced Modules Certificate of Specialist Technical Documentation TÜV Technical Documentation Risk Analysis Clinical Evaluation TÜV SÜD Academy s modular qualification, Regulatory Affairs, offers training modules that are suitable to all needs and abilities from the foundation course for beginners to qualification as Manager Regulatory Affairs International TÜV. We inform you about the certification requirements imposed by the Notified Bodies and show you how to launch your medical devices successfully on international markets. After completing the relevant training courses in one of the modules you can take an examination to document your qualifications in a certificate: Specialist Management Systems TÜV Furnishes evidence of your expertise in medical device law and management systems and enables you to accompany the approval of medical devices in the European Economic Area (EEA). Specialist Technical Documentation TÜV Provides you with the qualifications required for preparing technical documentation and enables you to assist in the approval of medical devices in the European Economic Area (EEA). In addition, the examination shows that you are familiar with the requirements related to clinical evaluation and risk management. Manager Regulatory Affairs TÜV After passing the Specialist Management Systems TÜV and Specialist Technical Documentation TÜV examinations, you acquire the qualification of Manager Regulatory Affairs TÜV and can assume responsibility for the approval of your medical devices in the EU. Manager Regulatory Affairs International TÜV In addition to Manager Regulatory Affairs TÜV qualification, you can demonstrate expertise in quality assurance and approval on key international markets. Foundation Module 4 5
4 Manager Regulatory Affairs International TÜV Training Courses: Regulatory Affairs The seminar familiarizes you with the fundamentals of the EU Medical Device Directives plus amendment directive 2007/47/EC, focusing in particular on special requirements of the European market. In addition, the seminar summarizes the various conformity assessment procedures and the relevant procedural standards. Management Systems for Medical Device Manufacturers Management systems for medical device manufacturers are governed by the EN ISO 13485:2012 standard. The seminar helps you to understand and implement in your organization the requirements applicable to management systems for manufacturers of medical devices. Clinical Evaluation of Medical Devices The seminar informs you about the criteria set forth in the relevant directives and laws for determining and providing clinical data within the scope of the conformity assessment of medical devices. Risk Management and Risk Analysis for Medical Devices in Accordance with the EN ISO 14971:2012 Standard The EU Medical Device Directive requires risk analysis to be carried out for each individual medical device. This course familiarizes you with applicable criteria of the relevant standards. Registration of Medical Devices in the USA Foundation and Advanced course on How to Prepare a 510(k) Application All medical devices to be placed on the US market must comply with the strict requirements of the FDA, the US authority responsible for the registration of medical devices. The foundation course familiarizes you with the FDA requirements. In the advanced course, you will learn how to prepare a 510(k) application. Registration of Medical Devices Outside the EU This course explains the requirements that must be fulfilled in countries like Brazil and Mexico to have your medical devices registered by the competent authorities there. Registration of Medical Devices in the Middle and Far East The introduction of new regulations governing export to the Middle and Far East brings new challenges for the manufacturers of medical devices. This seminar informs you about the various approval and framework conditions in the key target markets. Note: The seminars can be booked individually or as a Manager Regulatory Affairs International TÜV intensive seminar. The content of the training correspond to the current revison/harmonization. Technical Documentation for Medical Devices This seminar provides guidance on the systematic establishment and revision of technical documentation for medical devices in accordance with the applicable EU Directives. US FDA QM Requirements in Accordance with 21 CFR 820 QSReg/GMP in Comparison to Europe The US regulatory requirements for medical devices and their implementation differ fundamentally from those in the EU market. This seminar informs you about the QM requirements in the USA and their application. 6 7
5 Development of active or non-active medical devices Modular Qualification: Safety Expert (Non-) Active Medical Devices TÜV Certificate Safety Expert Active Medical Devices TÜV Functional Safety Foundation and Advanced Courses Objective Certificate Safety Expert Non-Active Medical Devices TÜV Sterilization of Medical Devices Foundation and Advanced Courses Safety Expert Active Medical Devices TÜV By passing this examination you can demonstrate your expertise in the safety-related requirements for active medical devices. You are particularly familiar with functional safety and the requirements for electrical safety set forth in the IEC , 3rd edition standard. Safety Expert Non-Active Medical Devices TÜV By passing this examination you can prove your expertise in the safetyrelated requirements for non-active medical devices. The examination focuses particularly on the requirements related to biological evaluation in accordance with the EN ISO standard and sterilization processes. Electrical Safety Foundation and Advanced Courses Advanced Modules Biological Safety Medical Devices Design and Development Management Medical Device Law foundation course Foundation Modules TÜV SÜD Academy s Safety Expert modular qualification provides comprehensive training from the foundation course for beginners to Safety Expert Active Medical Devices TÜV and Safety Expert Non-Active Medical Devices TÜV qualification. The seminar qualifies professionals in design departments to develop active or non-active medical devices in compliance with the applicable standards and laws and prepare the associated technical documentation. After completing the relevant training courses in one of the modules you can take an examination to document your qualifications in a certificate: 8 9
6 Safety Expert (Non-) Active Medical Devices TÜV Training Courses: Safety Expert The seminar familiarizes you with the fundamentals of the EU Medical Device Directives plus amendment directive 2007/47/EC, focusing in particular on special requirements of the European market. In addition, the seminar summarizes the various conformity assessment procedures and the relevant procedural standards. Medical Devices Design and Development Management This seminar provides an introduction to the regulatory requirements defined for the design and development process of medical devices. The seminar outlines the concept of the directive and the relevant reference in the Medical Device Directive (MDD). We familiarize you with the quality management requirements in accordance with ISO 13485, focusing on Sections of product realization. Biological Safety of Medical Devices Biological safety is one of the key aspects for implants and medical devices in direct or indirect contact with the body. The devices must be biologically safe, i.e. rejection by the body, sepsis, inflammatory responses or other complications caused by the devices should be avoided. This seminar teaches you the required biocompatibility testing to ensure the biological safety of medical devices in accordance with the EN ISO series of standards. Sterilization of Medical Devices Foundation and Advanced Courses The seminar explains the essential requirements for the sterilization of medical devices and hygiene monitoring as a basis of sterilization validation. Building on the knowledge acquired in the foundation course, the advanced course familiarizes you with the special aspects of the various sterilization processes. Safety of Medical Electrical Equipment IEC , 3rd Edition Foundation and Advanced Courses The international standard IEC , 3rd edition, defines the requirements for the basic safety of medical electrical equipment. The requirements established in the standard must be taken into consideration in the design of medical devices. Our foundation course explains the structure and safety philosophy of the standard and familiarizes you with the fundamentals of the required tests. The advanced course addresses and explains the electrical safety requirements. Functional Safety of Medical Devices Foundation and Advanced Courses on the Safety of Computer-Controlled Devices The objective of functional safety is to design medical devices that identify possible technological defects before they turn into problems and pose hazards. Building on the foundation course that presents the applicable standards and the basic principles of functional safety, the advanced course provides in-depth knowledge of the various methods of performing automatic self-tests for computer components. Note: You can book the seminars individually or as a Safety Expert (Non-) Active Medical Devices TÜV intensive seminar. The content of the training correspond to the current revison/ harmonization
7 Software development for medical devices Modular Qualification: Specialist Medical Software TÜV Certificate: Specialist Medical Software TÜV after successful completion of the foundation and advanced modules Objective Implementation of the Software Standard IEC for the Manufacturers of Medical Devices In addition, applying the EN 62366:2008 and IEC :2010 standards, you are able to develop software products offering optimum usability. Last but not least, you are familiar with the process of integrating the software lifecycle into the quality management and the risk management systems. After completing the training courses in one of the modules you can take an examination to document your qualifications in certificates for the individual topics. Usability of Medical Devices in Accordance with EN 62366:2008 and IEC :2010 Risk Management and Risk Analysis for Medical Devices in Accordance with EN ISO 14971:2012 Standard Advanced Modules Foundation Module Software is an important element in many medical devices. To ensure the safety and effectiveness of medical devices, experts need to know the desired software functions and how to ensure that these functions safely achieve the desired effects. The requirements established in the applicable laws and standards must be considered right from the outset of software design and development. By passing the examination you prove that you are able to ensure the development and integration of medical software in accordance with the relevant standards. You thus contribute to the safety of software products. You are familiar with the contents of the Medical Device Directive (MDD), know medical device law and understand risk management in accordance with EN ISO 14971:
8 Specialist Medical Software TÜV Training Courses: Medical Software The seminar familiarizes you with the fundamentals of the EU Medical Device Directives plus amendment directive 2007/47/EC, focusing in particular on special requirements of the European market. In addition, the seminar summarizes the various conformity assessment procedures and the relevant procedural standards. Risk Management and Risk Analysis for Medical Devices in Accordance with EN ISO 14971:2012 Standard The EU Medical Device Directive requires risk analysis to be carried out for each individual medical device. This course familiarizes you with applicable criteria of the relevant standards. Individualized qualification for you In-House Seminars: Customized Training Directly at Your Company s Premises What would you say to knowledge and advanced training that are delivered to your door? TÜV SÜD Academy s experienced education experts develop and realize individual training measures for you and your organization. We start by working with you to prepare a detailed analysis of your situation and training needs. Building on the results obtained in this analysis, we define your educational and training objectives and develop in-house seminars tailored to your needs. You benefit from a targeted qualification programme, including seminar preparation, evaluation of achievements and ensuring transfer of learning, implemented on-site in your company. Usability of Medical Devices in Accordance with EN 62366:2008 and IEC :2010 Usability and ergonomics have become key quality and performance characteristics of medical devices. The two standards EN and IEC , harmonized under the Medical Device Directive (93/42/EEC), define how to take usability aspects into account in the design and development process of medical devices. In this seminar, you learn to understand and meaningfully implement the requirements of the EN (IEC and IEC ) standard. Implementation of the Software Standard IEC for the Manufacturers of Medical Devices The seminar offers a practice-focused approach to the IEC standard. The implementation of this software standard poses a challenge for many manufacturers of medical devices as it requires a large number of processes, some of which are new. You obtain a basic overview of the key contents of the standard and the required processes that describe the software lifecycle. Based on practice assignments, we will exercise the application and implementation of the standard in terms of process design and documentation. Note: You can book the seminars individually or as a Specialist Medical Software intensive seminar. The content of the training correspond to the current revison/harmonization. Your benefits:! You define contents, framework and process in accordance with your needs. We provide staff training directly at your company s premises, saving you travel and accommodation costs. You ensure that participants that have different previous knowledge reach an uniform level of knowledge. You benefit from our longstanding experience in training and education at large multinationals and SMEs. From Europe, to the Americas and Asia Pacific at your request we will be happy to provide international training
9 Knowledge that makes the difference TÜV SÜD Akademie GmbH Westendstrasse Munich Germany Phone: +49 (0) Let s stay in touch! AC29-MedDevEng-fly-105x210-w
TÜV SÜD Akademie Trainings and certificates on international standards
TÜV SÜD Akademie Trainings and certificates on international standards Management Systems Name Duration All participants gain a TÜV SÜD Akademie certificate. Special types of certificates: Modular qualification
More informationMedical Device Training Program 2015
Medical Device Training Introduction Supplementary training and education is often overlooked by medical device professionals until it is triggered by an upcoming FDA or Notified Body and/or ISO 13485
More informationDemystifying the European Machinery Directive and SEMI Requirements for the Industrial Automation and Semiconductor Markets
Demystifying the European Machinery Directive and SEMI Requirements for the Industrial Automation and Semiconductor Markets An Overview of Current Changes and Directions By Andras Szende Senior Engineer
More informationWHITEPAPER: SOFTWARE APPS AS MEDICAL DEVICES THE REGULATORY LANDSCAPE
WHITEPAPER: SOFTWARE APPS AS MEDICAL DEVICES THE REGULATORY LANDSCAPE White paper produced by Maetrics For more information, please contact global sales +1 610 458 9312 +1 877 623 8742 globalsales@maetrics.com
More informationQuality Management System Certification. Understanding Quality Management System (QMS) certification
Quality Management System Certification Understanding Quality Management System (QMS) certification The medical device manufacturing sector is one of the most regulated sectors in which significant quality
More informationMed-Info. Council Directive 93/42/EEC on Medical Devices. TÜV SÜD Product Service GmbH
Med-Info International expert information for the Medical Device industry Council Directive 93/42/E on Medical Devices Practice-oriented summary of the most important aspects and requirements contained
More informationPreparing for Unannounced Inspections from Notified Bodies
Preparing for Unannounced Inspections from Notified Bodies Europe has introduced further measures for unannounced audits of manufacturers by notified bodies. With this in mind, James Pink, VP Europe-Health
More informationMedical Device Software Standards for Safety and Regulatory Compliance
Medical Device Software Standards for Safety and Regulatory Compliance Sherman Eagles +1 612-865-0107 seagles@softwarecpr.com www.softwarecpr.com Assuring safe software SAFE All hazards have been addressed
More informationMedical Device Software Do You Understand How Software is Regulated?
Medical Device Software Do You Understand How Software is Regulated? By Gregory Martin Agenda Relevant directives, standards, and guidance documents recommended to develop, maintain, and validate medical
More informationQuality Management System Certification. Understanding Quality Management System (QMS) certification
Quality Management System Certification Understanding Quality Management System (QMS) certification The medical device manufacturing sector is one of the most regulated sectors in which significant quality
More informationMed-Info. Malaysia Medical Device Regulations. TÜV SÜD Product Service GmbH. International expert information for the medical device industry
Med-Info International expert information for the medical device industry Malaysia Medical Device Regulations Passed in 2012, the Medical Device Act (Act 737) and the Medical Device Authority Act 2012
More informationMedical Devices. Notified Bodies and the CE certification Process for Medical Devices. European Surgical Robotics Demonstration Day
Medical Devices Notified Bodies and the CE certification Process for Medical Devices European Surgical Robotics Demonstration Day 27 th March 2014, Leuven, Belgium 1 Bart Mersseman Product Manager Medical
More informationThe New Paradigm for Medical Device Safety. Addressing the Requirements of IEC 60601-1 Edition 3.1
The New Paradigm for Medical Device Safety Addressing the Requirements of IEC 60601-1 Edition 3.1 Medical devices play a vital role in the diagnosis and treatment of most health-related conditions, and
More informationCOMMISSION OF THE EUROPEAN COMMUNITIES REPORT FROM THE COMMISSION ON MONITORING THE APPLICATION OF COMMUNITY LAW (2003) OVERALL POSITION
COMMISSION OF THE EUROPEAN COMMUNITIES Brussels, 30.12.2004 COM(2004) 839 final REPORT FROM THE COMMISSION ON MONITORING THE APPLICATION OF COMMUNITY LAW (2003) OVERALL POSITION 21st ANNUAL REPORT {SEC(2004)
More informationINDUSTRIAL SERVICES PRESSURE EQUIPMENT CERTIFICATION (PED) Pressure equipment certification. Your key to market access in Europe. www.tuv.
INDUSTRIAL SERVICES PRESSURE EQUIPMENT CERTIFICATION (PED) Pressure equipment certification. Your key to market access in Europe. www.tuv.com Comply with legal regulations and requirements. We help you
More informationUNDERSTANDING THE EC DIRECTIVE 98/79/EC ON IN VITRO DIAGNOSTIC MEDICAL DEVICES
UNDERSTANDING THE EC DIRECTIVE 98/79/EC ON IN VITRO DIAGNOSTIC MEDICAL DEVICES A WHITE PAPER ON THE REQUIREMENTS, REGULATIONS AND OPPORTUNITIES CONTAINED IN EC DIRECTIVE 98/79/EC AND A BRIEF COMPARISON
More informationFoundation Bridge in IT Service Management (ITSM) according to ISO/IEC 20000. Specification Sheet. ISO/IEC 20000 Foundation Bridge TÜV SÜD Akademie
Foundation Bridge in IT Service Management (ITSM) according to ISO/IEC 20000 Specification Sheet TÜV SÜD Akademie Issue: 2.0 Date: 25 October 2012 Table of Contents 1 Reading aid... 4 2 ISO/IEC 20000 -
More informationIndicative Training Catalogue
You expect Added Value.not just one more boring seminar! Εκπαίδευση Training Ausbildung Indicative Training Catalogue ISSUE: JANUARY 2010-Α Phone: Head Office: 24 El. Venizelou Str, 153 41 Ag. Paraskevi,
More informationOur name ASPHALION derives from the Greek word asphaléia, alluding to values such as firmness, stability, certainty and reliability.
Company Profile Our History ASPHALION is an International Drug Development and Regulatory Affairs consultancy firm founded in 2000, with an international team of over 40 people. Our Values Our name ASPHALION
More information15) GUIDELINES ON THE APPLICATION OF ISO 9001:2000 FOR THE FOOD AND DRINK INDUSTRY
15) GUIDELINES ON THE APPLICATION OF ISO 9001:2000 FOR THE FOOD AND DRINK INDUSTRY INTRODUCTION During the course of these seminars you have come across with the good management standards applicable within
More informationCE Marking: Your Key to Entering the European Market
CE Marking: Your Key to Entering the European Market N. Gerard Zapiain U.S. Department of Commerce International Trade Administration Office of Microelectronics, Medical Equipment and Instrumentation I.
More informationAccess global markets with a trusted one-stop partner
Choose certainty. Add value. Access global markets with a trusted one-stop partner Telecommunications solutions that ensure quality, safety and reliability Achieve fast market access anywhere in the world
More informationSecuring the Safety and Availability of Electrical Systems.
Securing the Safety and Availability of Electrical Systems. TÜV SÜD Industrie Service GmbH For measurable results TÜV SÜD. Electrical systems are of fascinating variety and increasing complexity. But to
More information-Blue Print- The Quality Approach towards IT Service Management
-Blue Print- The Quality Approach towards IT Service Management The Qualification and Certification Program in IT Service Management according to ISO/IEC 20000 TÜV SÜD Akademie GmbH Certification Body
More informationIntroduction into IEC 62304 Software life cycle for medical devices
Introduction into IEC 62304 Software life cycle for medical devices Christoph Gerber 4. September 2008 SPIQ 9/5/2008 1 Agenda Current Picture Regulatory requirements for medical device software IEC 62304
More informationYour partner for vocational education, training and certification of persons
Your partner for vocational education, training and certification of persons Qualifying people developing the future Training made in Germany TÜV SÜD Akademie GmbH Welcome note Mr. Kai Probst, CEO TÜV
More informationGUIDANCE NOTE FOR MANUFACTURERS OF CUSTOM-MADE MEDICAL DEVICES
GUIDANCE NOTE FOR MANUFACTURERS OF CUSTOM-MADE MEDICAL DEVICES Foreword This guidance document is informative and advisory and has no legal authority. Individual national enforcement authorities are bound
More informationMed-Info. New Act on Medical Devices in Japan. TÜV SÜD Product Service GmbH. International expert information for the Medical Device industry
Med-Info International expert information for the Medical Device industry New Act on Medical Devices in Japan New Act on Medical Devices (PMD Act) to be launched on November 25, 2014 Practice-oriented
More informationChecklist. Standard for Medical Laboratory
Checklist Standard for Medical Laboratory Name of hospital..name of Laboratory..... Name. Position / Title...... DD/MM/YY.Revision... 1. Organization and Management 1. Laboratory shall have the organizational
More informationFUNCTIONAL SAFETY INDUSTRIAL
FUNCTIONAL SAFETY INDUSTRIAL TRAINING AND PERSONAL QUALIFICATION PUBLIC TRAININGS, IN - HOUSE SEMINARS, PERSONAL CERTIFICATES, WEBINARS IEC 61508 ISO 13849 IEC 62061 IEC 61511 ISO 25119 IEC 60730 IEC 60335
More informationHow companies leverage quality and quality certifications to achieve competitive advantage
How companies leverage quality and quality certifications to achieve competitive advantage Eize de Boer Systems & Services Certification International Business Development Manager Pharma Supply Chain for
More informationHOW WILL THE EUROPEAN DIRECTIVE ROHS 2 IMPACT THE MEDICAL DEVICE INDUSTRY? February 2012 SPECIAL REPRINT. By James Calder
February 2012 SPECIAL REPRINT HOW WILL THE EUROPEAN DIRECTIVE ROHS 2 IMPACT THE MEDICAL DEVICE INDUSTRY? By James Calder Reproduced with the kind permission of Global Regulatory Press from the Journal
More informationAchieving Functional Safety with Global Resources and Market Reach
Achieving Functional Safety with Global Resources and Market Reach 0A 0B Burner management systems Combustion controls Electric vehicle components (on-board, off board) Electrosensitive equipment Elevator
More informationSCORR Marketing and Applied Clinical Trials EU Clinical Trials Survey Report 2015
SCORR Marketing and Applied Clinical Trials EU Clinical Trials Survey Report 2015 Overview How regulations impact where clinical trials are held has been an ongoing question in the drug development services
More informationKey functions in the system of governance Responsibilities, interfaces and outsourcing under Solvency II
Responsibilities, interfaces and outsourcing under Solvency II Author Lars Moormann Contact solvency solutions@munichre.com January 2013 2013 Münchener Rückversicherungs Gesellschaft Königinstrasse 107,
More informationRecent Updates on European Requirements and what QPs are expected to do
Recent Updates on European Requirements and what QPs are expected to do QP Forum 28/29 November 2013, Lisbon Dr. Bernd Renger Modified: Georg Goestl 1 Written Conformation for API-Import Actual Status
More informationEOS Services. EOS Services Competent Support in all Areas of Additive Manufacturing
EOS Services EOS Services Competent Support in all Areas of Additive Manufacturing EOS Service Portfolio We provide expert support in all areas of Additive Manufacturing (AM) with our comprehensive range
More informationNew changes to cleanroom & clean air device classifications: ISO 14644 1 & 2
New changes to cleanroom & clean air device classifications: ISO 14644 1 & 2 This white paper describes the changes outlined in the Draft International Standard (DIS) editions of ISO 14644-1 and ISO 14644-2.
More informationHow To Know If A Mobile App Is A Medical Device
The Regulation of Medical Device Apps Prepared for West of England Academic Health Science Network and University of Bristol June 2014 June 2014 1 Table of Contents 1 Purpose...3 2 Scope...3 3 The Regulation
More informationGuidance on the In Vitro Diagnostic Medical Devices Directive 98/79/EC
Guidance on the In Vitro Diagnostic Medical Devices Directive 98/79/EC August 2013 Contents 1 Introduction...3 2 Scope of the directive...3 2.1 What is an in vitro diagnostic medical device?... 3 2.2 Specimen
More informationPROPOSED DOCUMENT. Quality management system Medical devices Nonconformity Grading System for Regulatory Purposes and Information Ex-change
AHWP/WG3/P001:2013 PROPOSED DOCUMENT Title: Quality management system Medical devices Nonconformity Grading System for Regulatory Purposes and Information Ex-change Author: AHWP Work Group 3 Date: 13 November
More informationAPPLICATIO Training & Management GmbH. Frauenthal 8 20149 Hamburg Germany Tel.: +49 (0)40 220 86 68 Fax: +49 (0)40 220 86 46
APPLICATIO Training & Management GmbH Frauenthal 8 20149 Hamburg Germany Tel.: +49 (0)40 220 86 68 Fax: +49 (0)40 220 86 46 www.applicatio.com info@applicatio.com Initiatives, Awards, Responsibility: APPLICATIO
More informationMedical Devices: CE Marking Step-by Step
Medical Devices: CE Marking Step-by Step Sylvia Mohr Standards Specialist U.S. Mission to the European Union 1 Introduction CE marking in 8 Steps Overview intended purpose - technical documentation classification
More informationCONCEPT HEIDELBERG. Pharmaceutical Quality Training. Conferences. Services.
CONCEPT HEIDELBERG Pharmaceutical Quality Training. Conferences. Services. About Us Helping you to Comply with GMP Since our foundation on 1 April 1978, CONCEPT HEIDELBERG has been concentrating on providing
More informationISO 13485:201x What is in the new standard?
ISO 13485:201x What is in the new standard? Eric Finegan, Quality Mgr, BTE Technologies, Inc. 2015-09-10 1 Presentation Slides This slide deck is the presentation performed on 2015-09-10. A more detailed
More informationThe Medical Device Industry in Korea: Strategies for Market Entry
The Industry in Korea: Strategies Seth J. Goldenberg, Senior Principal Scientist, NAMSA; Yongha Na, Director, Medipert Regulatory NAMSA Whitepaper #09 06/2014 Seth J. Goldenberg, PhD (sgoldenberg@namsa.com)
More information360 o View of. Global Immigration
360 o View of Global Immigration In a fast moving global economy, remaining compliant with immigration laws, being informed and in control is more challenging than ever before. We are a globally linked
More informationSafe Quality Food Food Safety Certification
Safe Quality Food Food Safety Certification John F. Schulz Director of Business Operations SQF Institute The Value of Third Party Accredited Auditing Understanding SQF 2000 in the Packaging Industry February
More informationGuideline on good pharmacovigilance practices (GVP)
1 2 20 February 2012 EMA/541760/2011 3 4 Guideline on good pharmacovigilance practices (GVP) Module I Pharmacovigilance systems and their quality systems Draft finalised by the Agency in collaboration
More informationThe Public Contracts Regulations 2015 Guidance on Awarding Contracts
The Public Contracts Regulations 2015 Guidance on Awarding Contracts 1 P a g e Crown Commercial Service, Customer Service Desk: 0345 410 2222 www.gov.uk/ccs follow us on Twitter connect with us on LinkedIn
More informationINDEPENDANT CONSULTING FOR QUALITY AND REGULATORY AFFAIRS EXPERTS FOR MEDICAL DEVICES
INDEPENDANT CONSULTING FOR QUALITY AND REGULATORY AFFAIRS EXPERTS FOR MEDICAL DEVICES REFERENCES ADEQUAT EXPERTISE cooperates from now with companies which are looking for simple and useful solutions,
More informationGUIDELINES ON MEDICAL DEVICES EVALUATION OF CLINICAL DATA : A GUIDE FOR MANUFACTURERS AND NOTIFIED BODIES
EUROPEAN COMMISSION ENTERPRISE DIRECTORATE-GENERAL Single Market : regulatory environment, standardisation and New Approach Pressure equipment, medical devices, metrology MEDDEV. 2.7.1 April 2003 GUIDELINES
More informationCustomer application package. Included in this package are the following documents. Customer application form
Customer application package Included in this package are the following documents. Customer application form European Type Approval for Automotive Systems and Components Setting out some of the basics
More informationAgilent Infoline Web Services. Quick Reference Guide. Scan and use your phone to go to Infoline at www.agilent.com/find/service
Agilent Infoline Web Services Quick Reference Guide Scan and use your phone to go to Infoline at www.agilent.com/find/service One location for all information This quick reference guide reviews the powerful
More informationYOuR SuppLIER for InnOvaTIvE and ERp-IndEpEndEnT finance SOLuTIOnS. perfection In detail.
13 YOuR SuppLIER for InnOvaTIvE and ERp-IndEpEndEnT finance SOLuTIOnS perfection In detail. 2 3 About Cogon Your Supplier for innovative and ERp-independent Finance solutions The name cogon, derived from
More informationHOW TO REALIZE AN INTERNATIONALIZATION COMPONENT IN ENGINEERING CURRICULA
HOW TO REALIZE AN INTERNATIONALIZATION COMPONENT IN ENGINEERING CURRICULA Hans Ponsen Instructor Department of Mechanical Engineering Faculty of Engineering Technology University of Twente THE NETHERLANDS
More informationQuality Risk Management The Pharmaceutical Experience Ann O Mahony Quality Assurance Specialist Pfizer Biotech Grange Castle
Quality Risk Management 11 November 2011 Galway, Ireland Quality Risk Management The Pharmaceutical Experience Ann O Mahony Quality Assurance Specialist Pfizer Biotech Grange Castle Overview Regulatory
More informationPublic trainings, In-house seminars, webinars Personal qualification on ISO 26262
AFSP AFSE FUNCTIONAL SAFETY AUTOMOTIVE TRAINING AND PERSONAL QUALIFICATION Public trainings, In-house seminars, webinars Personal qualification on ISO 26262 THE SGS GROUP SGS-TÜV GmbH THE EXPERTS is the
More informationHow to Use the Design Process to Manage Risk: Elements of Design Controls and Why It Matters
environmental failure analysis & prevention health technology development How to Use the Design Process to Manage Risk: Elements of Design Controls and Why It Matters Kevin L. Ong, Ph.D., P.E. Managing
More informationWant to know more about the Notified Body?
NBG/V 2/07/14 BSI Notified Body (0086) Kitemark Court Davy Avenue Knowlhill Milton Keynes MK5 8PP United Kingdom T: +44 845 080 9000 E: eu.medicaldevices@bsigroup.com W: medicaldevices.bsigroup.com Want
More informationGuide for Custom-Made Dental Device Manufacturers on Compliance with European Communities (Medical Devices) Regulations, 1994
Guide for Custom-Made Dental Device Manufacturers on Compliance with European Communities (Medical SUR-G0014-1 12 NOVEMBER 2013 This guide does not purport to be an interpretation of law and/or regulations
More informationwww.nsf.org The right people. The right solution. The first time.
www.nsf.org The right people. The right solution. The first time. Educational Program Europe January December 2015 Why train with us? The right people. The right solution. The first time. 2 Flexible, Professional
More informationEDUCATIONAL OVERSIGHT INSPECTION OF PRIVATE FURTHER EDUCATION AND ENGLISH LANGUAGE COLLEGES MONITORING VISIT CAE OXFORD AVIATION ACADEMY
EDUCATIONAL OVERSIGHT INSPECTION OF PRIVATE FURTHER EDUCATION AND ENGLISH LANGUAGE COLLEGES MONITORING VISIT CAE OXFORD AVIATION ACADEMY Full Name of College CAE Oxford Aviation Academy Address Telephone
More informationTG 47-01. TRANSITIONAL GUIDELINES FOR ISO/IEC 17021-1:2015, ISO 9001:2015 and ISO 14001:2015 CERTIFICATION BODIES
TRANSITIONAL GUIDELINES FOR ISO/IEC 17021-1:2015, ISO 9001:2015 and ISO 14001:2015 CERTIFICATION BODIES Approved By: Senior Manager: Mpho Phaloane Created By: Field Manager: John Ndalamo Date of Approval:
More informationThe World Nuclear Supply
The World Nuclear Supply Chain An Overview Greg KASER Staff Director NEA International WPNE Workshop Paris 11 March 2014 Outline of Presentation 1. About WNA 2. Value of: New construction Early dismantlement
More informationGuideline on good pharmacovigilance practices (GVP)
22 June 2012 EMA/541760/2011 Guideline on good pharmacovigilance practices (GVP) Module I Pharmacovigilance systems and their quality systems Draft finalised by the Agency in collaboration with Member
More informationEXTENSION OF PERIODIC INSPECTION INTERVAL FOR LPG CYLINDERS
EXTENSION OF PERIODIC INSPECTION INTERVAL FOR LPG CYLINDERS VCA guidance for gaining authorisation in Great Britain Page 1 of 7 EXTENSION OF PERIODIC INSPECTION INTERVAL FOR LPG CYLINDERS VCA guidance
More informationOverview. Introduction To The Revised GPSD
KELLER AND HECKMAN LLP Serving Business through Law and Science The Revised EU General Product Safety Directive ( GPSD ) and the EU Product Liability Directive: Considerations for Global Consumer Product
More informationSoftware Development for Medical Devices
Software Development for Medical Devices Overcoming the Challenges of Compliance, Quality and Cost Software is fast becoming the differentiator for manufacturers of medical devices. The rewards of software
More informationFujitsu Group s Environmental Management: Outline of Environmental Protection Program (Stage IV)
Fujitsu Group s Environmental Management: Outline of Environmental Protection Program (Stage IV) V Hideru Yamaguchi (Manuscript received March 9, 2005) Environmental activities are an important element
More informationISO 55001:2014 Asset Management System 5-Day Training Course (IAM Certified)
ISO 55001:2014 Asset Management System 5-Day Training Course (IAM Certified) TÜV SÜD Introduction ISO 55001: 2014 is a newly released best practice standard for asset management. This standard helps to
More informationFile:Quality-Management Manual-V2
Quality- Management Manual ChenYang Technologies Gmbh & Co.KG Markt Schwabener Str. 8 85464 Finsing Telephone:: 08121/ 25 74 100 Fax:: 08121 / 25 74 101 E-Mail: info@chenyang.de Internet: www.chenyang.de
More informationQUALITY MANUAL. Version 2.6/August 2011. Printed copies are not subject to revision service.
QUALITY MANUAL Version 2.6/August 2011. Printed copies are not subject to revision service. About Power Innovation The company Power Innovation Stromversorgungstechnik GmbH belongs to the leading developers
More informationConformity assessment procedures of breast implants
Chapter: 2.5.5 Conformity assessment procedures; Conformity assessment for particular product groups Text:... Key words: Conformity assessment, breast implants The NB-MED (stage 3, Rev.-Nr. 4, Rev. date
More informationProject Management Training and Coaching.
we keep you ahead consulting Project Management Training and Coaching. Train your employee! We give your employees the qualifications your company needs, train their skills, and develop their personalities.
More informationService & Facility Management. We Guarantee That You Will Value Your Real Estate More Highly. www.imtech.de/en
Service & Facility Management We Guarantee That You Will Value Your Real Estate More Highly. www.imtech.de/en Our Service & Facility Management department About Imtech At Home with Efficiency. If there
More informationPEOPLE > SCIENCE > SOLUTIONS
PEOPLE > SCIENCE > SOLUTIONS Our difference Our foundation Our focus ANALYTICAL CHEMISTRY & MATERIALS CHARACTERIZATION EFFICACY (Functional testing) BIOCOMPATIBILITY (in vivo & in vitro toxicology) CLINICAL
More informationPressure Equipment Certification. Ensure the Conformity and Quality of Your Pressure Equipment. Worldwide. www.tuv.com/asme
INDUSTRIAL SERVICES PRESSURE EQUIPMENT CERTIFICATION Pressure Equipment Certification. Ensure the Conformity and Quality of Your Pressure Equipment. Worldwide. www.tuv.com/asme Worldwide Compliance of
More informationImplementation of ANSI/AAMI/IEC 62304 Medical Device Software Lifecycle Processes.
Implementation of ANSI/AAMI/IEC 62304 Medical Device Software Lifecycle Processes.. www.pharmout.net Page 1 of 15 Version-02 1. Scope 1.1. Purpose This paper reviews the implementation of the ANSI/AAMI/IEC
More informationInternal Quality Management System Audit Checklist (ISO9001:2015) Q# ISO 9001:2015 Clause Audit Question Audit Evidence 4 Context of the Organization
Internal Quality Management System Audit Checklist (ISO9001:2015) Q# ISO 9001:2015 Clause Audit Question Audit Evidence 4 Context of the Organization 4.1 Understanding the organization and its context
More informationCreate Order and Think Freely. Application Management Services.
Publisher: T-Systems Enterprise Services GmbH Corporate Marketing & Communications Mainzer Landstrasse 50 60325 Frankfurt am Main, Germany Cust. no. 641 261 704 Updated 08/2008 modifications and errors
More informationTRAINING AND PROMOTION OF THE EUROCODES
TRAINING AND PROMOTION OF THE EUROCODES Support to the implementation, harmonization and further development of the Eurocodes H. Gulvanessian, A. Pinto, S. Dimova, G. Tsionis, M. Geradin EUR 22857 EN -
More informationThe German Standardization Roadmap Mobile Diagnostic Systems. Thorsten Prinz and Janina Laurila-Dürsch Düsseldorf, 13.11.2014
The German Standardization Roadmap Mobile Diagnostic Systems Thorsten Prinz and Janina Laurila-Dürsch Düsseldorf, 13.11.2014 Medical Engineering at VDE Do you standardize or are you standardized? The German
More informationRAPS ONLINE UNIVERSITY
RAPS ONLINE UNIVERSITY Practical education and training for business success. For regulatory professionals, there is only one name to know and trust for online education and training RAPS Online University.
More informationWorking Party on Control of Medicines and Inspections. Final Version of Annex 16 to the EU Guide to Good Manufacturing Practice
Version 8 (final) EUROPEAN COMMISSION ENTERPRISE DIRECTORATE-GENERAL Single market, regulatory environment, industries under vertical legislation Pharmaceuticals and cosmetics Brussels, July 2001 S\common\legal-legislation\75-319nd81-851\91-356\eudralexvol4\Annex
More informationTesting Services. Training. TestBench. Consulting. Software-Quality Assurance and Testing
Testing Services Training TestBench Consulting Software-Quality Assurance and Testing The Company Ready for Every Test imbus is a leading solution partner for professional software testing and intelligent
More informationGUIDELINES FOR IMPORT AND MANUFACTURE OF MEDICAL DEVICES
GUIDELINES FOR IMPORT AND MANUFACTURE OF MEDICAL DEVICES The Ministry of Health and F.W. under Gazette notification S.O. 1468 (E) dated 6/10/2005 declared the following sterile devices to be considered
More informationmaster-feeder structures: made in luxembourg UCITS IV
master-feeder structures: made in luxembourg UCITS IV What is a master-feeder structure? One of the main features of the UCITS IV Directive is the master-feeder structure, which provides for pooling of
More informationInternational standards and guidance that address Medical Device Software
International standards and guidance that address Medical Device Software Sherman Eagles Technical Fellow Medtronic CRDM Convener IEC 62A/ISO 210 JWG3 Co-convener IEC 62A/ISO 215 JWG7 Standards in the
More informationFINAL DOCUMENT. Guidelines for Regulatory Auditing of Quality Management Systems of Medical Device Manufacturers Part 1: General Requirements
GHTF/SG4/N28R4:2008 FINAL DOCUMENT Title: Guidelines for Regulatory Auditing of Quality Management Systems of Medical Device Manufacturers Authoring Group: GHTF Study Group 4 Endorsed by: The Global Harmonization
More informationGuidance for manufacturers and Notified Bodies on reporting of Design Changes and Changes of the Quality System
NBOG s Best Practice Guide applicable for AIMDD, MDD, and IVDD 2014-3 Guidance for manufacturers and Notified Bodies on reporting of Design Changes and Changes of the Quality System 1 Introduction The
More informationNational Accreditation Board for Certification Bodies. Accreditation Criteria
Accreditation Criteria for Medical devices - Quality management systems - for regulatory purposes Certification BCB 135 October 2012 Contents 0.0 Foreword 2 1.0 Scope 2 2.0 Criteria 2 3.0 Guidance on the
More informationModularisation and functional safety in mechanical and plant engineering
Modularisation and functional safety in mechanical and plant engineering Wideburg Solutions Ever since our founding in May 2011, our primary objective has been to transfer successful concepts and methods
More informationThere is no Silver Bullet to complying with the US FDA GMPs by Alan Schwartz
There is no Silver Bullet to complying with the US FDA GMPs by Alan Schwartz Recently, we participated in a seminar on United States (US) Food and Drug Administration (FDA) regulations to the Hebei Pharmaceutical
More informationquality, health & safety and environment training and consulting
quality, health & safety and environment training and consulting QUALMS Group QHSE Training & Consulting is a leading business services provider of applied; Quality, Food Safety, Occupational Health &
More informationCustomised programmes
Customised programmes for your company s needs Design your education programme Table of Contents P03 Steinbeis Business Academy P04 Your benefit - Project Competence Concept P05 Added value for the customer
More informationA more efficient approach to regulatory maintenance of marketed products
White paper The Hub & Spoke model: A more efficient approach to regulatory maintenance of marketed products Redeploy regulatory assets to profit drivers Peter Lassoff, PharmD, Vice President and Head of
More informationQuality Manual. UK Wide Security Solutions Ltd. 1 QM-001 Quality Manual Issue 1. January 1, 2011
Quality Manual 1 QM-001 Quality Manual Issue 1 January 1, 2011 This document is uncontrolled when printed. Please verify with Quality Management Representative 16 Dukes Close, West Way, Walworth Industrial
More informationComparative analysis between the possible regulatory approaches to GMP compliance TITOLO PRESENTAZIONE
Comparative analysis between the possible regulatory approaches to GMP compliance TITOLO PRESENTAZIONE Dr. Fulvio CARLOTTI, GNOSIS SpA, Corporate QA Director September 26, 2014 Scope of GMP GMP compliance
More information01 INTRODUCTION Huisman Global Services 04 Our Mission 05 Our Vision 05
01 INTRODUCTION Huisman Global Services 04 Our Mission 05 Our Vision 05 02 SERVICE TO PERFORM Service to perform 06 Safety first: from office to on-site 06 Dedicated first point of contact 07 Huisman global
More information