GEOSPATIAL ENGINEERING COMPETENCIES Land and Engineering Surveying

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "GEOSPATIAL ENGINEERING COMPETENCIES Land and Engineering Surveying"

Transcription

1 GOSPATIAL NGINRING COMPTNCIS Land and ngineering Surveying The measurement, definition and portrayal, either digitally or graphically in the form of maps or plans, of the physical features of, and the structures on the arth s surface. The ability to understand engineering design information and from this provide dimensional control for all stages of construction work. Range Indicators will be demonstrated in the application of relevant knowledge, understanding and skills set out in the land and engineering surveying competency requirements. Such knowledge and skills will normally be obtained through a structured education to the requisite level and work experience. This area of specialism includes the following core skills: Comprehensive understanding of 2 & 3 dimensional co-ordinate geometry Comprehensive experience of all commonly used classes of instruments/tools that measure angles & distances Comprehensive experience of carrying out topographic surveys at various scales Comprehensive experience of engineering surveying/setting out at all stages of construction Understanding of principles of geodesy and the problems or representing curved surfaces with planar coordinates Comprehensive experience of the use of ICT for processing/manipulating geospatial information xperience of other aspects of measurement. Communication, basic computing and health and safety skills apply to all specialisms and are elsewhere. vidence Guide vidence of successful achievement of this competency would be effective and efficient management of the land and engineering surveying process with the application of appropriate systems for monitoring and reporting of data, at the minimum levels as stated in the competency details and range of elements. ICS is a registered educational charity Chartered Institution of CIVIL NGINRING SURVYORS

2 GOSPATIAL NGINRING COMPTNCIS Land and ngineering Surveying GS k The ability to carry out TOPOGRAPHIC SURVYS Activity Details A Specifications and scope of survey Understand and use of scale Site reconnaissance Use of appropriate coordinate reference system Use of appropriate survey control stations and measurements Height control different methods of establishing A variety of methods of capturing topographic survey information. Radial obs, RT GPS, tachymetry, tape/offset etc Use of appropriate equipment, total station, GPS, Tape, reflectorless DM Data capture and feature coding. Recording of survey information Appropriate ongoing checking procedures Underground services surveys and record investigations. Data Processing, manual or using ICT Use and understanding of CAD, layering etc Presentation of information digital, hard copy ICS is a registered educational charity Chartered Institution of CIVIL NGINRING SURVYORS

3 GOSPATIAL NGINRING COMPTNCIS Land and ngineering Surveying The ability to use, and understanding of, surveying instruments GS1 15 Activity Details Total Stations conventional A 16 Total Stations reflectorless 17 Other methods of measuring distance 18 GPS - static - RT 19 Theodolites 20 Levels optical precise 21 Levels optical automatic 22 Levels optical dumpy 23 Levels digital 24 Levels rotating laser 25 Instrument checking 26 Instrument calibration 27 Instrument adjustment 28 Accessories checking and adjustment 29 A Laser Scanners 30 lectronic tapes/handheld measuring devices ICS is a registered educational charity Chartered Institution of CIVIL NGINRING SURVYORS

4 GOSPATIAL NGINRING COMPTNCIS Land and ngineering Surveying To be able to undertake engineering surveying / setting out and provide reports to clients and third parties GS1 31 Activity Details Understanding requirements, accuracies A 32 Retrieving existing survey information and linking to design drawings 33 stablishing and surveying appropriate control stations to appropriate accuracy 34 Use of appropriate equipment, Total Station, GPS, Tape, reflectorless DM 35 Data capture, survey records 36 Methods of marking dimensional information on site 37 Communication of dimensional information to others. Verbal, graphical, written presentation of information 38 Maintenance and verification of dimensional control 39 Problems associated with curved surfaces 40 The arth Spheroid, Geoid etc 41 Projections 42 National Reference grids 43 Scale factor 44 GPS data processing general 45 GPS different reference frameworks, TRS89, WGS84 or other ICS is a registered educational charity Chartered Institution of CIVIL NGINRING SURVYORS

5 GOSPATIAL NGINRING COMPTNCIS Land and ngineering Surveying GS To have knowledge and understanding of geometric principles Activity Details A 3 dimensional co-ordinate geometry. All calculations, manual and using computers Geometric calculations 2D and 3D Survey control intersection, resection, free station, traverse, network Adjustment of survey measurements. Redundant observations, Principles of least squares, residuals, standard errors, error ellipses Quality of geometric configurations Measurement of heights use of height datums- datum transformations Planar co-ordinate transformations Self-checking survey measurements lectronic data capture Transfer of survey data between instrument and computer lectronic processing of co-ordinate geometry data including geometric networks. Use and manipulation of digital round models Use of spreadsheets ICS is a registered educational charity Chartered Institution of CIVIL NGINRING SURVYORS

6 GOSPATIAL NGINRING COMPTNCIS Land and ngineering Surveying The ability to use ICT (Information and Communication technology) in surveying GS1 Activity Details A 59 CAD - general principles, structure, layering 60 CAD various formats autocad, MOSS, microstation and others 61 CAD data transfer dxf, Genio etc A candidate should also show significant experience of at least two of the following specialist areas of measurement: 62 Laser Scanning and processing of scanned data 63 Measured surveys of buildings 64 Monitoring of movement 65 Control and measurement of verticality 66 Remote Surveying 67 Photogrammetry 68 Underground services surveying 69 Machine control instrumentation 70 Hydrography ICS is a registered educational charity Chartered Institution of CIVIL NGINRING SURVYORS

7 GOSPATIAL NGINRING COMPTNCIS Land and ngineering Surveying 1 st Review Supervisors signature Date 2 nd Review Supervisors signature Date 3 rd Review Supervisors signature Date ICS is a registered educational charity Chartered Institution of CIVIL NGINRING SURVYORS

Total Program's Units

Total Program's Units Associate Degree Program Department of Civil and Architectural Technology Major : Survey Technology First Semester NO 5 6 Code SRV 0 SRV 0 SRV 0 ENG 0 MTH 7 CMT 0 Course Title Land survey Survey drawing

More information

IMCA Competence Assessment Portfolio May 2012

IMCA Competence Assessment Portfolio May 2012 S/S30/000/01 Safety (S30 refers to Grade II core competences which are applicable to roles S31, S32, S33, S34 and S35, as described in IMCA C 004) Safe working practices Identify different areas in the

More information

CONTROL POINT SURVEYING AND TOPOGRAPHIC MAPPING

CONTROL POINT SURVEYING AND TOPOGRAPHIC MAPPING CONTROL POINT SURVEYING AND TOPOGRAPHIC MAPPING Shoichi Oki Land Bureau, National Land Agency, Japan Keywords: control point, survey, topography, mapping, geodesy Contents 1. Introduction 2. Geometric

More information

SURVEYING WITH GPS. GPS has become a standard surveying technique in most surveying practices

SURVEYING WITH GPS. GPS has become a standard surveying technique in most surveying practices SURVEYING WITH GPS Key Words: Static, Fast-static, Kinematic, Pseudo- Kinematic, Real-time kinematic, Receiver Initialization, On The Fly (OTF), Baselines, Redundant baselines, Base Receiver, Rover GPS

More information

Laser Scanning Surveying and Ground Penetrating Radar The Full Three Dimensional Picture Above and Below Ground

Laser Scanning Surveying and Ground Penetrating Radar The Full Three Dimensional Picture Above and Below Ground Laser Scanning Surveying and Ground Penetrating Radar The Full Three Dimensional Picture Above and Below Ground CIVILEX 2009 Mark Hudson, Director, Coastway, FInstCES MRICS MIS BTS Jeff Hott, Laser Scanning

More information

Survey Ties Guidelines

Survey Ties Guidelines North Carolina Board of Examiners for Engineers and Surveyors Survey Ties Guidelines The North Carolina Board of Examiners for Engineers and Surveyors is providing this document to serve as an interpretative

More information

GEOGRAPHIC INFORMATION SYSTEMS CERTIFICATION

GEOGRAPHIC INFORMATION SYSTEMS CERTIFICATION GEOGRAPHIC INFORMATION SYSTEMS CERTIFICATION GIS Syllabus - Version 1.2 January 2007 Copyright AICA-CEPIS 2009 1 Version 1 January 2007 GIS Certification Programme 1. Target The GIS certification is aimed

More information

Map Projection, Datum and Plane Coordinate Systems

Map Projection, Datum and Plane Coordinate Systems Map Projection, Datum and Plane Coordinate Systems Geodetic Control Network Horizontal Control Network Datum A datum is a set of parameters defining a coordinate system, and a set of control points whose

More information

Geographic Datums & Coordinates

Geographic Datums & Coordinates Geographic Datums & Coordinates What is the shape of the earth? Why is it relevant for GIS? 9-04-2012 GEO327G/386G, UT Austin 2-1 From Conceptual to Pragmatic Dividing a sphere into a stack of pancakes

More information

SPATIAL REFERENCE SYSTEMS

SPATIAL REFERENCE SYSTEMS SPATIAL REFERENCE SYSTEMS We will begin today with the first of two classes on aspects of cartography. Cartography is both an art and a science, but we will focus on the scientific aspects. Geographical

More information

Field Preparations with Topcon Tools

Field Preparations with Topcon Tools Oscar R. Cantu Topcon University FTP Site For access to previously offered webinars and supporting documentation, please go to: ftp://tulive+topconuniversity.com:tulive@ftp.topconuniversity.com Topcon

More information

Application Report. Propeller Blade Inspection Station

Application Report. Propeller Blade Inspection Station 34935 SE Douglas Street, Suite, Snoqualmie, WA 9874 Ph: 425-396-5577 Fax: 425-396-586 Application Report Propeller Blade Inspection Station Prepared By Kyle Johnston, Ph. D. Metron Systems Inc.5.5 3 2.5

More information

Leica ScanStation 2 Exceptional Speed, Outstanding Versatility

Leica ScanStation 2 Exceptional Speed, Outstanding Versatility Leica ScanStation 2 Exceptional Speed, Outstanding Versatility Leica ScanStation 2 A New Level of Versatility and Speed in Laser Scanners With a 10-times boost in maximum instantaneous scan speed and the

More information

Welcome to Lesson 3. It is important for a GIS analyst to have a thorough understanding of map projections and coordinate systems.

Welcome to Lesson 3. It is important for a GIS analyst to have a thorough understanding of map projections and coordinate systems. Welcome to Lesson 3. It is important for a GIS analyst to have a thorough understanding of map projections and coordinate systems. A GIS without coordinates would simply be a database like Microsoft Excel

More information

technical notes Trimble business CenTer software trimble BuSineSS Center your Complete office Solution

technical notes Trimble business CenTer software trimble BuSineSS Center your Complete office Solution Trimble business CenTer software technical notes trimble BuSineSS Center your Complete office Solution trimble Business Center software is your complete office solution for post-processing satellite and

More information

Ellipsoid and Datum, Projection, Coordinate system, and Map Scale

Ellipsoid and Datum, Projection, Coordinate system, and Map Scale Ellipsoid and Datum, Projection, Coordinate system, and Map Scale Lectures 4 Sept 14, 2006 Why we need it? Earth Shape Models Flat earth models are still used for plane surveying, over distances short

More information

Photogrammetry: DTM Extraction & Editing

Photogrammetry: DTM Extraction & Editing Photogrammetry: DTM Extraction & Editing How can one determine the x, y, and z of a location? Approaches to DTM Extraction Ground surveying Digitized topographic maps Traditional photogrammetry Hardcopy

More information

STATE OF NEVADA Department of Administration Division of Human Resource Management CLASS SPECIFICATION

STATE OF NEVADA Department of Administration Division of Human Resource Management CLASS SPECIFICATION STATE OF NEVADA Department of Administration Division of Human Resource Management CLASS SPECIFICATION TITLE PHOTOGRAMMETRIST/CARTOGRAPHER V 39 6.102 PHOTOGRAMMETRIST/CARTOGRAPHER II 33 6.110 PHOTOGRAMMETRIST/CARTOGRAPHER

More information

1 Basic concepts of surveying

1 Basic concepts of surveying 1 Basic concepts of surveying The aim of this chapter is to introduce the reader to the basic concepts of surveying. It is therefore the most important chapter and worthy of careful study and consideration.

More information

Total Station Setup and Operation. Sokkia SET Total Station

Total Station Setup and Operation. Sokkia SET Total Station Total Station Setup and Operation Sokkia SET Total Station Parts of the SET Total Station Parts of the SET Total Station Sokkia SET 550 Total Station Keys/Screen SET 550 Menu Pages SET 550 Menu Pages Leveling

More information

Available in Base or Survey Standard or Survey Professional series with different modules add-ons to suit your technical requirement and budget.

Available in Base or Survey Standard or Survey Professional series with different modules add-ons to suit your technical requirement and budget. World First Leading the Surveying and Civil Engineering software application, civilcad 6 is the world first application of its kind to run in the Plug and Go concept. Delivered pre-installed on a customised

More information

CHAPTER 9 SURVEYING TERMS AND ABBREVIATIONS

CHAPTER 9 SURVEYING TERMS AND ABBREVIATIONS CHAPTER 9 SURVEYING TERMS AND ABBREVIATIONS Surveying Terms 9-2 Standard Abbreviations 9-6 9-1 A) SURVEYING TERMS Accuracy - The degree of conformity with a standard, or the degree of perfection attained

More information

Earth Coordinates & Grid Coordinate Systems

Earth Coordinates & Grid Coordinate Systems Earth Coordinates & Grid Coordinate Systems How do we model the earth? Datums Datums mathematically describe the surface of the Earth. Accounts for mean sea level, topography, and gravity models. Projections

More information

APPLICATION OF OPEN SOURCE/FREE SOFTWARE (R + GOOGLE EARTH) IN DESIGNING 2D GEODETIC CONTROL NETWORK

APPLICATION OF OPEN SOURCE/FREE SOFTWARE (R + GOOGLE EARTH) IN DESIGNING 2D GEODETIC CONTROL NETWORK INTERNATIONAL SCIENTIFIC CONFERENCE AND XXIV MEETING OF SERBIAN SURVEYORS PROFESSIONAL PRACTICE AND EDUCATION IN GEODESY AND RELATED FIELDS 24-26, June 2011, Kladovo -,,Djerdap upon Danube, Serbia. APPLICATION

More information

The BASIS module in WindPRO is necessary for the use of any of the other calculation modules. It contains the four following elements:

The BASIS module in WindPRO is necessary for the use of any of the other calculation modules. It contains the four following elements: The BASIS module in WindPRO is necessary for the use of any of the other calculation modules. It contains the four following elements: 1. Project Management / Globe (Project Explorer) 2. WTG Catalogue

More information

Automotive Applications of 3D Laser Scanning Introduction

Automotive Applications of 3D Laser Scanning Introduction Automotive Applications of 3D Laser Scanning Kyle Johnston, Ph.D., Metron Systems, Inc. 34935 SE Douglas Street, Suite 110, Snoqualmie, WA 98065 425-396-5577, www.metronsys.com 2002 Metron Systems, Inc

More information

Volumes of Revolution

Volumes of Revolution Mathematics Volumes of Revolution About this Lesson This lesson provides students with a physical method to visualize -dimensional solids and a specific procedure to sketch a solid of revolution. Students

More information

CAD Standards Guideline For Facility Documentation and Construction Projects

CAD Standards Guideline For Facility Documentation and Construction Projects CAD Standards Guideline For Facility Documentation and Construction Projects Page 1 of 12 Table of Contents A. Software B. CAD Methods 1. Layer Standards 2. Font 3. Lineweights 4. External References 5.

More information

The Map Grid of Australia 1994 A Simplified Computational Manual

The Map Grid of Australia 1994 A Simplified Computational Manual The Map Grid of Australia 1994 A Simplified Computational Manual The Map Grid of Australia 1994 A Simplified Computational Manual 'What's the good of Mercator's North Poles and Equators, Tropics, Zones

More information

INTRODUCTION: BASIC GEOGRAPHIC CONCEPTS. Eric Jessup Associate Professor School of Economic Sciences

INTRODUCTION: BASIC GEOGRAPHIC CONCEPTS. Eric Jessup Associate Professor School of Economic Sciences INTRODUCTION: BASIC GEOGRAPHIC CONCEPTS Eric Jessup Associate Professor School of Economic Sciences September 13, 2010 Outline What is geographical / spatial analysis and why do we care? Different types

More information

Introduction to GIS (Basics, Data, Analysis) & Case Studies. 13 th May 2004. Content. What is GIS?

Introduction to GIS (Basics, Data, Analysis) & Case Studies. 13 th May 2004. Content. What is GIS? Introduction to GIS (Basics, Data, Analysis) & Case Studies 13 th May 2004 Content Introduction to GIS Data concepts Data input Analysis Applications selected examples What is GIS? Geographic Information

More information

Projections & GIS Data Collection: An Overview

Projections & GIS Data Collection: An Overview Projections & GIS Data Collection: An Overview Projections Primary data capture Secondary data capture Data transfer Capturing attribute data Managing a data capture project Geodesy Basics for Geospatial

More information

Guideline for Control Surveys by Differential Levelling

Guideline for Control Surveys by Differential Levelling Guideline for Control Surveys by Differential Levelling Special Publication 1 Intergovernmental Committee on Surveying and Mapping (ICSM) Permanent Committee on Geodesy (PCG) 24 September 2014 Intergovernmental

More information

MAGNET Field is a powerful and intuitive field

MAGNET Field is a powerful and intuitive field MAGNET Field is a powerful and intuitive field application software that enables users to collect survey mapping data and perform construction and road layout using total stations, levels, and GPS. MAGNET

More information

Accuracy of Geometric Geoid Model of Singapore using RTK Heighting

Accuracy of Geometric Geoid Model of Singapore using RTK Heighting Yam Khoon TOR, Singapore Key words: Geometric Geoid, RTK Heighting SUMMARY A complete re-levelling of the precise levelling network of Singapore was carried out to derive the reduced levels of some 2000

More information

4.03 Vertical Control Surveys: 4-1

4.03 Vertical Control Surveys: 4-1 4. HORIZONTAL AND VERTICAL CONTROL 4.01 General: Sufficient horizontal and, if applicable, vertical control surveys shall be established by the Contractor for all photogrammetric mapping purposes. Prior

More information

THE CONTROL OF A ROBOT END-EFFECTOR USING PHOTOGRAMMETRY

THE CONTROL OF A ROBOT END-EFFECTOR USING PHOTOGRAMMETRY THE CONTROL OF A ROBOT END-EFFECTOR USING PHOTOGRAMMETRY Dr. T. Clarke & Dr. X. Wang Optical Metrology Centre, City University, Northampton Square, London, EC1V 0HB, UK t.a.clarke@city.ac.uk, x.wang@city.ac.uk

More information

ALIGNMENT OF CRANE RAILS USING A SURVEY NETWORK. Mark R. Shortis and Giuseppe Ganci Department of Geomatics University of Melbourne

ALIGNMENT OF CRANE RAILS USING A SURVEY NETWORK. Mark R. Shortis and Giuseppe Ganci Department of Geomatics University of Melbourne Abstract ALIGNMENT OF CRANE RAILS USING A SURVEY NETWORK Mark R. Shortis and Giuseppe Ganci Department of Geomatics University of Melbourne Alignment surveys have been carried out by various means and

More information

3D Scanner using Line Laser. 1. Introduction. 2. Theory

3D Scanner using Line Laser. 1. Introduction. 2. Theory . Introduction 3D Scanner using Line Laser Di Lu Electrical, Computer, and Systems Engineering Rensselaer Polytechnic Institute The goal of 3D reconstruction is to recover the 3D properties of a geometric

More information

Asset Data: A New Beginning, A New AURIZON. OmniSurveyor3D - The one source of truth

Asset Data: A New Beginning, A New AURIZON. OmniSurveyor3D - The one source of truth Asset Data: A New Beginning, A New AURIZON OmniSurveyor3D - The one source of truth Gerard Buckett Program Manager, Asset Management Improvement, Aurizon Network 30 years experience in rail engineering

More information

ENGINEERING TECHNICIAN I ENGINEERING TECHNICIAN II

ENGINEERING TECHNICIAN I ENGINEERING TECHNICIAN II CITY OF ROSEVILLE ENGINEERING TECHNICIAN I ENGINEERING TECHNICIAN II DEFINITION To perform a variety of technical office and field work involving drafting, surveying, mapping, and related engineering activities.

More information

Arm2. Arm Arm22. Articulated Arm. machines MEASURING. tridimensional measuring FRATELLI ROTONDI

Arm2. Arm Arm22. Articulated Arm. machines MEASURING. tridimensional measuring FRATELLI ROTONDI Arm Arm22 2 Arm2 tridimensional measuring Articulated Arm MEASURING machines FRATELLI ROTONDI Arm2 MEASURING Arm2Arm2 SOFTWARE Software in WINDOWS environment: sura tridimesio - elements with definite

More information

Map Coordinates, GIS, and GPS for Enhanced 9-1-1

Map Coordinates, GIS, and GPS for Enhanced 9-1-1 Map Coordinates, GIS, and GPS for Enhanced 9-1-1 Keith W. Cunningham, Ph.D. 14 East Eighth Street Lawrence, KS 66044 800/238-1911 Maps and coordinates are used to describe features and their locations

More information

To develop an understanding of the basic principles of drawing using AutoCAD. 3) Deduce the intersection lines for intersected cylinders.

To develop an understanding of the basic principles of drawing using AutoCAD. 3) Deduce the intersection lines for intersected cylinders. PROGRAMME: COURSE NAME: NATIONAL DIPLOMA IN INTERIOR DESIGN COMPUTER AIDED DESIGN (2D) COURSE CODE: ARC 213 DURATION: 0 4 4 UNITS: GOAL: GENERAL OBJECTIVES: 4 UNIT To develop an understanding of the basic

More information

Making Better Medical Devices with Multisensor Metrology

Making Better Medical Devices with Multisensor Metrology Making Better Medical Devices with Multisensor Metrology by Nate J. Rose, Chief Applications Engineer, Optical Gaging Products (OGP) Multisensor metrology is becoming a preferred quality control technology

More information

technical notes Trimble Business Center Software Makes Processing GNSS Survey Data Effortless COMPLETE GNSS DATA PROCESSING

technical notes Trimble Business Center Software Makes Processing GNSS Survey Data Effortless COMPLETE GNSS DATA PROCESSING Trimble Business Center software technical notes Trimble Business Center Software Makes Processing GNSS Survey Data Effortless Trimble Business Center is powerful surveying office software designed to

More information

CAD Standards Guideline For Facility Documentation and Construction Projects

CAD Standards Guideline For Facility Documentation and Construction Projects CAD Standards Guideline For Facility Documentation and Construction Projects Implemented March 2010 Page 1 of 9 Table of Contents A. Software B. CAD Methods 1. Layer Standards 2. Font 3. Lineweights 4.

More information

Optical Digitizing by ATOS for Press Parts and Tools

Optical Digitizing by ATOS for Press Parts and Tools Optical Digitizing by ATOS for Press Parts and Tools Konstantin Galanulis, Carsten Reich, Jan Thesing, Detlef Winter GOM Gesellschaft für Optische Messtechnik mbh, Mittelweg 7, 38106 Braunschweig, Germany

More information

A PHOTOGRAMMETRIC APPRAOCH FOR AUTOMATIC TRAFFIC ASSESSMENT USING CONVENTIONAL CCTV CAMERA

A PHOTOGRAMMETRIC APPRAOCH FOR AUTOMATIC TRAFFIC ASSESSMENT USING CONVENTIONAL CCTV CAMERA A PHOTOGRAMMETRIC APPRAOCH FOR AUTOMATIC TRAFFIC ASSESSMENT USING CONVENTIONAL CCTV CAMERA N. Zarrinpanjeh a, F. Dadrassjavan b, H. Fattahi c * a Islamic Azad University of Qazvin - nzarrin@qiau.ac.ir

More information

The process components and related data characteristics addressed in this document are:

The process components and related data characteristics addressed in this document are: TM Tech Notes Certainty 3D November 1, 2012 To: General Release From: Ted Knaak Certainty 3D, LLC Re: Structural Wall Monitoring (#1017) rev: A Introduction TopoDOT offers several tools designed specifically

More information

UNITED NATIONS E/CONF.97/5/CRP. 13

UNITED NATIONS E/CONF.97/5/CRP. 13 UNITED NATIONS E/CONF.97/5/CRP. 13 ECONOMIC AND SOCIAL COUNCIL Seventeenth United Nations Regional Cartographic Conference for Asia and the Pacific Bangkok, 18-22 September 2006 Item 6 (b) of the provisional

More information

CAD / CAM Dr. P. V. Madhusuthan Rao Department of Mechanical Engineering Indian Institute of Technology, Delhi Lecture No. # 12 Reverse Engineering

CAD / CAM Dr. P. V. Madhusuthan Rao Department of Mechanical Engineering Indian Institute of Technology, Delhi Lecture No. # 12 Reverse Engineering CAD / CAM Dr. P. V. Madhusuthan Rao Department of Mechanical Engineering Indian Institute of Technology, Delhi Lecture No. # 12 Reverse Engineering So what we will do in today s lecture is basically take

More information

Development of Large-Scale Land Information System (LIS) by Using Geographic Information System (GIS) and Field Surveying

Development of Large-Scale Land Information System (LIS) by Using Geographic Information System (GIS) and Field Surveying Engineering, 2012, 4, 107-118 http://dx.doi.org/10.4236/eng.2012.42014 Published Online February 2012 (http://www.scirp.org/journal/eng) Development of Large-Scale Land Information System (LIS) by Using

More information

technical notes TRIMBLE SURVEY MANAGER SOFTWARE

technical notes TRIMBLE SURVEY MANAGER SOFTWARE TRIMBLE SURVEY MANAGER SOFTWARE technical notes The Trimble survey manager software is a powerful Field and office software for the collection, processing, and visualization of data collected during precise

More information

Tips & Tricks for Creating Civil 3D Surfaces from LiDAR Data

Tips & Tricks for Creating Civil 3D Surfaces from LiDAR Data Tips & Tricks for Creating Civil 3D Surfaces from LiDAR Data Matt Miyamoto Ideate Inc. www.ideateinc.com 2 LiDAR Data LiDAR (Light Detection And Ranging) data collection systems have been available for

More information

Accuracy Analysis of Railway Mapping - the Stuttgart Strassenbahnen Pilot Project

Accuracy Analysis of Railway Mapping - the Stuttgart Strassenbahnen Pilot Project Accuracy Analysis of Railway Mapping - the Stuttgart Strassenbahnen Pilot Project Master thesis By: Nahla Mohammad Abdelkader MAHMOUD Co-supervisor: Dipl.-Ing. Michael Peter Supervisor: Prof. Dr.-Ing.

More information

Proper Implementation of Industrial CT Scanning to Reduce Inspection Costs & Get to Production Faster. Jesse Garant, JG&A Metrology Center

Proper Implementation of Industrial CT Scanning to Reduce Inspection Costs & Get to Production Faster. Jesse Garant, JG&A Metrology Center Proper Implementation of Industrial CT Scanning to Reduce Inspection Costs & Get to Production Faster Jesse Garant, JG&A Metrology Center Traditional Metrology and Inspection Tactile Devices (Touch Probe)

More information

STATE CONTROL SURVEY SPECIFICATIONS FOR PRIMARY CONTROL SURVEYS. Now Obsolete

STATE CONTROL SURVEY SPECIFICATIONS FOR PRIMARY CONTROL SURVEYS. Now Obsolete STATE CONTROL SURVEY SPECIFICATIONS FOR PRIMARY CONTROL SURVEYS Now Obsolete Caution: This document has been prepared by scanning the original Specifications for Primary Control Surveys - 1984 and using

More information

PHOTOGRAMMETRIC TECHNIQUES FOR MEASUREMENTS IN WOODWORKING INDUSTRY

PHOTOGRAMMETRIC TECHNIQUES FOR MEASUREMENTS IN WOODWORKING INDUSTRY PHOTOGRAMMETRIC TECHNIQUES FOR MEASUREMENTS IN WOODWORKING INDUSTRY V. Knyaz a, *, Yu. Visilter, S. Zheltov a State Research Institute for Aviation System (GosNIIAS), 7, Victorenko str., Moscow, Russia

More information

Everything You Need For Efficient Surveying Campaigns

Everything You Need For Efficient Surveying Campaigns TRIMBLE S3/S6/S8/VX TOTAL WORKSTATIONS Everything You Need For Efficient Surveying Campaigns Choose the Trimble Robot That Best Meets Your Needs Choose either the S3/S6/S8 or VX Models based on your needs

More information

MODERN CONCEPTS OF 3D MODELING IN GEODETIC WORKS

MODERN CONCEPTS OF 3D MODELING IN GEODETIC WORKS G. Rusu, C. C. Mu at Modern concepts of 3D modeling in geodetic works MODERN CONCEPTS OF 3D MODELING IN GEODETIC WORKS Georgiana RUSU, Ph.D. Student Politehnica University of Timi oara, georgianarusu85@yahoo.com

More information

Tennessee Mathematics Standards 2009-2010 Implementation. Grade Six Mathematics. Standard 1 Mathematical Processes

Tennessee Mathematics Standards 2009-2010 Implementation. Grade Six Mathematics. Standard 1 Mathematical Processes Tennessee Mathematics Standards 2009-2010 Implementation Grade Six Mathematics Standard 1 Mathematical Processes GLE 0606.1.1 Use mathematical language, symbols, and definitions while developing mathematical

More information

Land Survey Services and Building Site Services 

Land Survey Services and Building Site Services  Land Surveyors Land surveyors assess a particular area for the purpose of development, and to measure and map the area. Land surveyors used advanced technology such as GPS, Robotic Total Stations (Theodolites),

More information

PRODUCT BROCHURE SPATIAL ANALYZER. Powerful, traceable and easy-to-use metrology and analysis software

PRODUCT BROCHURE SPATIAL ANALYZER. Powerful, traceable and easy-to-use metrology and analysis software PRODUCT BROCHURE SPATIAL ANALYZER Powerful, traceable and easy-to-use metrology and analysis software SPATIAL ANALYZER SpatialAnalyzer (SA) is a powerful, traceable and easy to use metrology and analysis

More information

Warren Geissler, CAD-1 Geospatial Technical Specialist Training Center Manager. Background:

Warren Geissler, CAD-1 Geospatial Technical Specialist Training Center Manager. Background: Migrating CAD into GIS Best Practices Warren Geissler, ACI Training Center Manager Geospatial Technical Specialist 303.427.2231 info@cad-1.com www.cad-1.com Warren Geissler, CAD-1 Geospatial Technical

More information

* This work is an official contribution of the National Institute of Standards and Technology and

* This work is an official contribution of the National Institute of Standards and Technology and Variability in the Geometric Accuracy of Additively Manufactured Test Parts A.L. Cooke and J.A. Soons National Institute of Standards and Technology * Gaithersburg, MD, USA Abstract This paper describes

More information

INTEGRATING BIM AND GIS FOR ASSET MANAGEMENT

INTEGRATING BIM AND GIS FOR ASSET MANAGEMENT INTEGRATING BIM AND GIS FOR ASSET MANAGEMENT Andy Chan MHKIBIM Project Manager Spatial Technology Limited Agenda Introduction of Asset Management Why GIS is not sufficient for Asset Management Data model

More information

Guideline for the Adjustment and Evaluation of Survey Control Special Publication 1

Guideline for the Adjustment and Evaluation of Survey Control Special Publication 1 Guideline for the Adjustment and Evaluation of Survey Control Special Publication 1 Intergovernmental Committee on Surveying and Mapping (ICSM) Permanent Committee on Geodesy (PCG) 24 September 2014 Document

More information

HIGH-PERFORMANCE INSPECTION VEHICLE FOR RAILWAYS AND TUNNEL LININGS. HIGH-PERFORMANCE INSPECTION VEHICLE FOR RAILWAY AND ROAD TUNNEL LININGS.

HIGH-PERFORMANCE INSPECTION VEHICLE FOR RAILWAYS AND TUNNEL LININGS. HIGH-PERFORMANCE INSPECTION VEHICLE FOR RAILWAY AND ROAD TUNNEL LININGS. HIGH-PERFORMANCE INSPECTION VEHICLE FOR RAILWAYS AND TUNNEL LININGS. HIGH-PERFORMANCE INSPECTION VEHICLE FOR RAILWAY AND ROAD TUNNEL LININGS. The vehicle developed by Euroconsult and Pavemetrics and described

More information

Manufacturing Process and Cost Estimation through Process Detection by Applying Image Processing Technique

Manufacturing Process and Cost Estimation through Process Detection by Applying Image Processing Technique Manufacturing Process and Cost Estimation through Process Detection by Applying Image Processing Technique Chalakorn Chitsaart, Suchada Rianmora, Noppawat Vongpiyasatit Abstract In order to reduce the

More information

QUALITY CONTROL: PARADATA WITHIN THE 3D-ICONS PROJECT. Fabio Remondino BRUNO KESSLER FOUNDATION (FBK) Trento, Italy

QUALITY CONTROL: PARADATA WITHIN THE 3D-ICONS PROJECT. Fabio Remondino BRUNO KESSLER FOUNDATION (FBK) Trento, Italy QUALITY CONTROL: PARADATA WITHIN THE 3D-ICONS PROJECT Fabio Remondino BRUNO KESSLER FOUNDATION (FBK) Trento, Italy Metadata & Paradata Paradata is normally associated to the survey operations [Couper,

More information

DXF Import and Export for EASE 4.0

DXF Import and Export for EASE 4.0 DXF Import and Export for EASE 4.0 Page 1 of 9 DXF Import and Export for EASE 4.0 Bruce C. Olson, Dr. Waldemar Richert ADA Copyright 2002 Acoustic Design Ahnert EASE 4.0 allows both the import and export

More information

CHAPTER 3 PROJECT CONTROL

CHAPTER 3 PROJECT CONTROL CHAPTER 3 PROJECT CONTROL Marking Survey Control Points 3-2 Horizontal Control 3-2 Vertical Control 3-3 Preconstruction Bench Marks 3-3 Bench Mark Levels 3-3 Bench Mark Check Levels 3-5 Total Station Leveling

More information

Analyzing the geometric accuracy of simple shaped reference object models created by terrestrial laser scanners

Analyzing the geometric accuracy of simple shaped reference object models created by terrestrial laser scanners International Journal of the Physical Sciences Vol. 6(28), pp. 6529-6536, 9 November, 2011 Available online at http://www.academicjournals.org/ijps DOI: 10.5897/IJPS11.344 ISSN 1992-1950 2011 Academic

More information

Lecture 4. Map Projections & Coordinate System in GIS

Lecture 4. Map Projections & Coordinate System in GIS Lecture 4 Map Projections & Coordinate System in GIS GIS in Water Resources Spring 2015 Geodesy, Map Projections and Coordinate Systems Geodesy - the shape of the earth and definition of earth datums Map

More information

EasySTONE Info Sheet

EasySTONE Info Sheet EasySTONE Info Sheet EasySTONE, Info Sheet Page 1 of 9 EasySTONE is the ideal CAD/CAM for marble and similar materials working industry by numerically controlled machining centres. EasySTONE is complete

More information

PLOTTING SURVEYING DATA IN GOOGLE EARTH

PLOTTING SURVEYING DATA IN GOOGLE EARTH PLOTTING SURVEYING DATA IN GOOGLE EARTH D M STILLMAN Abstract Detail surveys measured with a total station use local coordinate systems. To make the data obtained from such surveys compatible with Google

More information

SQAR Supplement for the Control and Use of Digital Datasets

SQAR Supplement for the Control and Use of Digital Datasets Authorized documents are published online only. Verify any copy against the online system before use. Aerospace Systems SQAR Supplement for the Control and Use of Digital Datasets Joseph F. Jackson Director,

More information

Application Example: Quality Control. Turbines: 3D Measurement of Water Turbines

Application Example: Quality Control. Turbines: 3D Measurement of Water Turbines Application Example: Quality Control Turbines: 3D Measurement of Water Turbines Measuring Systems: ATOS, TRITOP Keywords: Kaplan, Francis, Pelton, angles 3D scanning of turbines was performed successfully

More information

Introduction to GIS GIS and SedNet Training

Introduction to GIS GIS and SedNet Training Introduction to GIS GIS and SedNet Training Phil- WAVES Verna Duque Lacanlale 21 April 2015 Outline of presentation 1. Learning Outcome 2. Geographic information 3. Geographic information technologies

More information

LASER SCANNER APPLICATION ON COMPLEX SHAPES OF ARCHITECTURE. PROFILES EXTRACTION PROCESSING AND 3D MODELLING.

LASER SCANNER APPLICATION ON COMPLEX SHAPES OF ARCHITECTURE. PROFILES EXTRACTION PROCESSING AND 3D MODELLING. LASER SCANNER APPLICATION ON COMPLEX SHAPES OF ARCHITECTURE. PROFILES EXTRACTION PROCESSING AND 3D MODELLING. Carlo MONTI Full Professor E-mail: carlo.monti@polimi.it Luigi FREGONESE Research Assegnist

More information

The user forum is an excellent community in which to bounce questions off other professional users, like you.

The user forum is an excellent community in which to bounce questions off other professional users, like you. INTRODUCTION Thank you for your interest in MicroSurvey Point Prep Point Prep is a simple to use desktop based product designed specifically for the construction layout professional. Point Prep is used

More information

www.passpe.com Surveying for California Civil PE License Dr. Shahin A. Mansour, PE Surveying for California Civil Engineering License

www.passpe.com Surveying for California Civil PE License Dr. Shahin A. Mansour, PE Surveying for California Civil Engineering License Well Organized, Based on the Current California Board Test Plan and References, Detailed, Computer Generated Index (8 pages), Simplified Concepts, 66 Sample Problems with Detailed Solutions, and 181 Supplemental

More information

SURVEY PRO. GPS Quick Start Guide

SURVEY PRO. GPS Quick Start Guide SURVEY PRO GPS Quick Start Guide ii Table of Contents Before You Leave the Office...1 Survey Method: RTK or Post Processing...2 Receiver Setup...2 Receiver Settings...3 RTK Data Collection and Stake Out...4

More information

LUMETRISCAN 360: AUTOMATED BALLOON AND TUBING MEASUREMENT SYSTEM

LUMETRISCAN 360: AUTOMATED BALLOON AND TUBING MEASUREMENT SYSTEM LUMETRISCAN 360: AUTOMATED BALLOON AND TUBING MEASUREMENT SYSTEM OVERVIEW Lumetrics was asked by our customers to provide a system that can measure thickness of any round object whether balloon, tube,

More information

GIS s s Roots in Cartography

GIS s s Roots in Cartography Following up on the last lecture GIS s s Roots in Cartography Getting Started With GIS Chapter 2 Information ordering: Lists and indexes Organizing data and information Information can be organized as

More information

Engineering Graphics with AutoCAD

Engineering Graphics with AutoCAD Engineering Graphics with AutoCAD Overview By Prof. D. M. Kulkarni Engineering Graphics with AutoCAD http://www.phindia.com/bookdetail_forth.php?isbn=978-81-203-3783-1 Team of Authors Dr. Dhananjay M.

More information

Case Study Australia. Dr John Dawson A/g Branch Head Geodesy and Seismic Monitoring Geoscience Australia. Chair UN-GGIM-AP WG1 Chair APREF.

Case Study Australia. Dr John Dawson A/g Branch Head Geodesy and Seismic Monitoring Geoscience Australia. Chair UN-GGIM-AP WG1 Chair APREF. Case Study Australia Dr John Dawson A/g Branch Head Geodesy and Seismic Monitoring Geoscience Australia Chair UN-GGIM-AP WG1 Chair APREF Page 1 Overview 1. Australian height system Australian Height Datum

More information

Automill. Tebis. Tebis Viewer stations as an integrating component in the process chain. Importing and processing data

Automill. Tebis. Tebis Viewer stations as an integrating component in the process chain. Importing and processing data TEBIS Viewer Tebis Viewer a must for knowledge-based and time-saving manufacturing processes Tebis Viewer Tebis Viewer systems provide process stations with access to the digital data environment, both

More information

Geographic Referencing

Geographic Referencing CHAPTER 10 Geographic Referencing 10.1 GEOGRAPHIC LOCATION SYSTEMS To create a reliable map, it is necessary to relate the digital data to its true terrestrial situation. 10.1.1 Land Subdivision The system

More information

REV G D6-51991 Boeing Partner Network REFERENCE ONLY Copy 1 of 15

REV G D6-51991 Boeing Partner Network REFERENCE ONLY Copy 1 of 15 REV G D6-51991 Boeing Partner Network REFERENCE ONLY Copy 1 of 15 TABLE OF CONTENTS Section Page Table of Contents 2 Abstract 3 Maintenance 3 References 3 Purpose 4 Scope 4 Definitions 4 1.0 Digital Product

More information

DAMAGED ROAD TUNNEL LASER SCANNER SURVEY

DAMAGED ROAD TUNNEL LASER SCANNER SURVEY University of Brescia - ITALY DAMAGED ROAD TUNNEL LASER SCANNER SURVEY Prof. Giorgio Vassena giorgio.vassena@unibs.it WORKFLOW - Demand analysis - Instruments choice - On field operations planning - Laser

More information

FUNDAMENTALS OF LANDSCAPE TECHNOLOGY GSD Harvard University Graduate School of Design Department of Landscape Architecture Fall 2006

FUNDAMENTALS OF LANDSCAPE TECHNOLOGY GSD Harvard University Graduate School of Design Department of Landscape Architecture Fall 2006 FUNDAMENTALS OF LANDSCAPE TECHNOLOGY GSD Harvard University Graduate School of Design Department of Landscape Architecture Fall 2006 6106/ M2 BASICS OF GRADING AND SURVEYING Laura Solano, Lecturer Name

More information

CAD Techniques Helping To Enhance NDT Workflow

CAD Techniques Helping To Enhance NDT Workflow CAD Techniques Helping To Enhance NDT Workflow Steve McCarley Eclipse Sientific Products Inc. www.eclipsescientific.com This document will show you some applied techniques and uses of CAD to solve some

More information

EXAMPLE OF DATA FUSION AND 3D PRESENTATION OF A VERY COMPLEX IRREGULAR BUILDING

EXAMPLE OF DATA FUSION AND 3D PRESENTATION OF A VERY COMPLEX IRREGULAR BUILDING EXAMPLE OF DATA FUSION AND 3D PRESENTATION OF A VERY COMPLEX IRREGULAR BUILDING Albert Grimm-Pitzinger, Klaus Hanke University of Innsbruck, Institute of Geodesy Technikerstraße 13, A-6020 Innsbruck, Austria

More information

SA Training Topics. New River Kinematics, Inc.

SA Training Topics. New River Kinematics, Inc. SA Training Topics New River Kinematics, Inc. SpatialAnalyzer TM Training Topics 08-02-2007 United States copyright law protects this manual, associated software disks, algorithms, and visual content.

More information

Inkscape. Two-dimensional vector graphics. For laser cutting

Inkscape. Two-dimensional vector graphics. For laser cutting Inkscape Two-dimensional vector graphics For laser cutting Inkscape - Vector drawing Free vector drawing program Vectors are mathematically defined points, lines, curves, etc. Scalable, unlike raster images

More information

Coming To An Airport Near You

Coming To An Airport Near You Airport GIS Data & ealp Coming To An Airport Near You Kevin Shirer, AAE Project Manager Association of California Airports; September 2009 Today s Presentation & Expectations Take away Basic knowledge

More information

CAPLAN a comprehensive view

CAPLAN a comprehensive view cremer programmentwicklung gmbh CAPLAN a comprehensive view CAPLAN www.cpentw.de CAPLAN Contents 3 4 6 8 10 12 14 16 18 19 CAPLAN for Surveying and Civil Engineering Project Database Plan Window Engineering

More information

Ted MacKinnon & Jonathan Murphy

Ted MacKinnon & Jonathan Murphy Introduction & Simple Guide to Using the Leica Total Station Ted MacKinnon & Jonathan Murphy This document was originally submitted as part of a requirement for the Applied Geomatics Research advanced

More information