Jaspi ThermoStore. Jaspi ThermoStore systems have multiple flow / return and thermostat connection points for easy installation and flexibility.

Transcription

1 Jaspi ThermoStore With over 30 years experience in manufacturing and development of high-quality and innovative heating products, Jaspi ThermoStores are leaders in their class. Modern production facilities, high-end design technologies and high quality materials give our products unrivalled reliability and energy efficiency. Jaspi ThermoStore systems are designed to improve efficiency of any heating system by connecting all the available energy sources into a single unit. This also provides the ultimate flexibility for the future as any heat source can be removed or added at any point Jaspi ThermoStore are 'hybrid' units and can have up to 4 indirect heating coils for four separate heat sources & domestic hot water. No separate immersion tank is needed. Depending on the dwelling size, heat demand and connected heat sources, there are five models available;, 700, 1, 2000 & 3000 litres. All ThermoStore units can be fitted with a Stainless Steel domestic Hot Water coil, which is highly efficient, lightweight and can be used in all water conditions also with hard water that has high levels of dissolved minerals, particularly calcium. This guarantees a very long service life with no loss of efficiency. Indirect coils and immersion heaters can also be added at a later stage if new heat sources are connected or new technologies become available. Jaspi ThermoStore systems have multiple flow / return and thermostat connection points for easy installation and flexibility.

2 Jaspi ThermoStore & 700 & 700 litre Jaspi-ThermoStore units are designed to work with traditional or underfloor central heating systems and all heat sources. They are designed to minimize the installation floor space and can fit through most of the standard doors. High-efficiency Stainless Steel domestic hot water coil provides ample, mains pressure hot water. & 700 litre ThermoStore tanks can be fitted with two back-up immersion heaters, one for daytime top-up use and another for night-time cheaper tariff heat charging. Immersion heaters come in 3 kw, 4,5 kw & 6 kw variations. Jaspi-ThermoStore is essential for any heating system that uses two or more heat sources and will supply the domestic hot water & radiator / underfloor heat from a single unit. ThermoStore ThermoStore & 700 Description 1. Domestic Indirect Hot Water Coil Ø22 2. Domestic Indirect Hot Water Pre-heating Coil Ø22 (optional) 3. Immersion heater (optional) 2 4. Sensor / Thermostat 3/4 5. Solar heating coupling 1 for models with indirect solar coil 6. Heating circuit return & system drain 1 7. Heating circuit flow & expansion vessel connection 1 - High-density urethane insulation 65 mm - Highest permitted store temperature 110 C - Indirect Solar heating coil (optional) Model ThermoStore -k 700-k Capacity (l) 700 Weight (kg) Pressure (bar) Dimensions (mm) A B C Specifications are subject to change without notice for future improvement.

3 Jaspi ThermoStore 1, 2000 & , 2000 & 3000 litre Jaspi-ThermoStore systems can be used for larger houses, multiple heat circuits (for example separate flats or office units) and Industrial installations. They are shaped for optimum heat distribution throughout the tank and will provide market leading expandibility for multiple heat sources, system monitoring and thermal efficiency. These ThermoStore tanks can be fitted with up to four back-up immersion heaters for daytime top-up use or cheaper rate night-time heat charging. They are also fitted with a new high-efficiency Stainless Steel indirect hot water coil. Any heat source can be fitted to the system either directly or by the means of up to four indirect coils. This way the ThermoStore can always be charged with the heat source which is the cheapest / available at any point (e.g. Solar, Wind or Heat Pump). Description 1. Domestic Indirect Hot Water Coil Ø22 2. Domestic Indirect Hot Water Pre-heating Coil Ø22 (optional) 3. Immersion heater (optional) 2 4. Sensor / Thermostat 3/4 5. Solar heating coupling 1 for models with indirect solar coil 6. System Drainage 1 7. Expansion vessel connection 1 8. Heating circuit return 1 1/4 9. Heating circuit flow 1 1/4 - High-density urethane insulation 100 mm - Highest permitted store temperature 110 C - Indirect Solar heating coil (optional) Model ThermoStore 1-k 2000-k 3000-k Capacity (l) Weight (kg) Pressure (bar) Dimensions (mm) A B C Specifications are subject to change without notice for future improvement.

4 Jaspi Hybrid -160 & Jaspi Hybrid thermal storage tanks are designed to be used with low temperature heat sources such as heat pumps, solar heating and wind power. Their compact size makes them suitable for heating system refurbishments as well as for new dwellings. The stylish silver Hybrid tanks come in two sizes, and 700 litres including the internal Stainless steel hot water tanks of 160 and 200 litres respectively. Unique, internal hot water tank with fast heat recovery rate, will supply ample hot water from your renewable energy source. Inside the Hybrid thermal tank, instead of a coil, is a high grade Stainless Steel 160 or 200 litre domestic hot water cylinder. This cylinder is fully immersed in a larger volume of water held in the tank. This ensures fast recovery of domestic hot water without the need for extra high temperatures commonly used with traditional boilers. Savings in energy consumption are easy to see. To guarantee the supply of hot water in all circumstances, we recommend that the system is fitted with back-up heating. This can be for example a J-Immersion heater (3, 4.5 or 6 kw), oil boiler or a wood / coal burner. Multiple connections for different heat sources makes Hybrid future proof when new energy sources are available. Jaspi Hybrid tanks have a flange for solar coil as standard making it simple to fit a solar coil even at a later stage. Our Hybrid technology is used by many heat pump manufacturers and now it is also available for domestic users with traditional heating. Description 1. Internal Hot water cylinder (Stainless Steel) 2. Reservation for Solar coil (optional) 3. Reservation for Immersion heater 2" 4. Heat pump flow 3/4" 5. When connected to central heating, CH return 3/4" 6. Thermometer / Sensor 1/2" 7. Sensor 3/4" 8. Sensor 1/2" 9. Drain 1" 10. When connected to central heating, CH flow & expansion 1" 11. Domestic cold water in D Domestic hot water out D Heat pump return 3/4" Accessories J-Immersion heaters 3 & 4.5kW Solar coil (copper) 1,5 bar Pressure relief valves 2" Plug 22mm to D18 compression reducer Model Storage Hot Water Weight Pressure Dimension mm Jaspi Hybrid litres litres Kg bar A B C , , Specifications are subject to change without notice for future improvement. Jaspi Hybrid thermal storage tank - Air-to-water heat pump - Solar energy system System connection example. Do not use as a detailed installation drawing.

5 Extra equipment Stainless Steel Hot water coil Stainless steel hot water coil can be fitted to all Jaspi ThermoStore systems. If the instant hot water demand is very high, we recommend that a second, pre-heating coil is fitted to the lower part of the ThermoStore. It is also needed if the system is fitted with a Solar coil. Jaspi Immersion heaters Perfect fit for all ThermoStore systems. They will provide backup and boost in the event of a boiler failure, or when other heat sources are not available. All three versions; 3, 4.5 & 6 kw have a built-in thermostat, safety cut-off, indicator light and are made of high grade Stainless Steel. Solar heating package This Solar heating package can be connected to any Jaspi ThermoStore system. Full system includes 5 hot water Solar panels, pump station, solar controller, 40 L of transfer fluid, roof fixings and expansion vessel. Jaspi ThermoStore provides ultimate flexibility for your heating By combining two or more heat sources together you can save up to 75% in heating costs compared to the traditional heating systems. When the heat is available (e.g. Solar) or convenient to use (e.g. Wood boiler), it is stored several days in ThermoStore and can then be used when needed. Heat Pump & Electric heating Solid wood / Pellet / Woodchip & combination Boilers Solar Heating & Oil / Electricity / Heat Pump

6 JASPI KNOWS HEATING Leading the way Kaukora Oy, the manufacturer of JASPI & JAMA was established in Southern Finland in 1976 to satisfy the rapidly increasing demand for energy efficient heating products due to the first oil crisis in the early 70's. Since then, the product range has grown to include Thermal Storage systems, Water heaters, Wood, pellet and multifuel boilers, Centralised / District heating systems, Electric boilers, Solar heating & Heat pumps. Our products are widely exported with hundreds of thousands of working systems around the world, including Europe, Japan and the United States. Our production facilities are modern, clean and designed to minimise the environmental impact of the large scale industrial production. We utilise solar & wind power in our factories. All the work is carried out under the strict product quality and environmental standards of ISO 9001 & ISO Over 30 years, our in-house product development and testing facilities have produced innovative, long lasting and future proof heating products which have been proven time after time. Every Jaspi product is a sound investment for the greener future. Manufacturer: HEATING Kaukora Oy P.O. Box 21, Raisio, Finland Tel , Fax kaukora@kaukora.fi UK Distributors: JASPI UK Limited 6 Beare Trading Estate nr. Broadclyst Exeter EX5 3JX Devon info@jaspi.co.uk info@woodviking.com ISO ISO 9001 EN /2009