Fittings, flanged pipes and valves made of ductile cast iron (GGG)

Transcription

1 FITTINGS AND VALVES Index: (click with mouse) Fittings, flanged pipes and valves made of ductile cast iron (GGG) Düker in general Preamble The complete product range > Index Location plan Flag / Addresses Fittings, Flanged pipes and Valves made of Ductile Cast Iron ( GGG ) We designed the electronic version of our product catalogue user-friendly. In addition to useful information you will find the complete product range of Düker fittings and valves. To see each detailed information, please click on the desired category within the index. To get back to the Index please click on the blue area (chapter) at the top margin.

2 Back to summary Member of FGR / EADIPS association E Hauptstraße 39 41, 6346 Laufach, Germany All rights reserved, including copying as a whole or in part. Deviations in dimensions and weights and in the illustrations are possible. In the interest of technical progress, we reserve the right to implement changes and improvements to the products without previous announcement. Düker GmbH & Co. KGaA Hauptstraße 39 41, 6346 Laufach, Germany Phone: Telefax: sales.fittings-valves@dueker.de Internet:

3 6 Back to summary Düker GmbH & Co. KGaA As early as in 1469, official documents mentioned a mine, which developed more or less continually into today s company Düker. The foundry and enamelling works cover a production area of more than,000 square meters with approx. 6 employees. 7 At Laufach / Spessart and Karlstadt / Main, Düker manufactures products used in: Drainage technology Hubless drainage pipe systems couplings for hubless drainage pipe systems Underground construction flanged pressure pipes fittings and valves Chemical industry Acid-proof glass-lined pipes valves special valves and columns Jobbing foundry castings in small, medium and large series various cast iron qualities (grey cast iron and spheroidal cast iron), raw and machined various casting procedures (hand moulding, machine casting, centrifugal casting)

4 Back to summary How to find Düker 9

5 10 We keep on moving Back to summary 11 Dear customer, dear business friends, We are glad to present you the new edition of our product catalogue for fittings, flanged pipes and valves made of ductile cast iron for underground construction. In addition to quality and reliability as well as to the extension and specifying of our product range we always assist you with planning, service and individual customer care. You can always depend on Düker consultants, technicians and designing engineers regarding questions, particular tasks and demands. Of course we also appreciate your incitations and criticism. Demand us give us a call! Your Sales Department Phone: Joints for fittings, flanged pipes and valves made of ductile cast iron (GGG) Ductile cast iron (GGG) fittings and flanged pressure pipes Ductile cast iron (GGG) valves Accessories Laying and assembly instructions Contacts

6 12 Index Description Code Page 13 To page down within the categories please use the navigation bar of the acrobat-reader as well. 1 Joints for fittings, flanged pipes and valves made of ductile cast iron (GGG) Socket joints TYTON socket joints TYT 22 Screw-gland socket joints SMU 23 Bolted-gland socket joints STB Restrained socket joints TYTON socket joints with TYTON SIT 26 with TYTON SIT PLUS ( TSP ) 27 Novo socket joints with NOVO-SIT 2 with NOVO-Grip III 29 Screw-gland socket joints with Düker SMU thrust resisting joint 30 with Düker SPEZIAL Flanged joints PN PN PN PN 3 39 Hexagon head screws for flanges 41 Flat gaskets for flanges 42 Arrangement of screw holes 43

7 Index Index 14 Description Code Page Description Code Page 15 2 Ductile cast iron (GGG) fittings and flanged pressure pipes 45 Inside and outside protection Flanged pressure pipes Pressure pipes with cast-on flanges FFG 4 Weight table FFG Fittings Notes Marking 51 Flanged sockets E Flanged sockets EU Flanged spigots F 56 Collars U 57 Single socket bends 90 MQ 5 Double socket bends 90 MMQ 59 Single socket bends 45 MK Double socket bends 45 MMK Single socket bends 30 MK Double socket bends 30 MMK Single socket bends 22 1/2 MK Double socket bends 22 1/2 MMK 22 Single socket bends 11 1/4 MK Double socket bends 11 1/4 MMK Double socket tees with flanged branch MMA 6 73 All socket tees MMB 74 7 Double socket tees with 45 socket branch MMC see sewage fittings programme Double socket tapers MMR 79 1 Single socket tees with spigot and flanged branch A 2 3 Single socket tees with spigot and socket branch B 4 Double flanged bends 90 Q 5 Double flanged duckfoot bends 90 N 6 Double flanged bends 45 FFK 45 7 Double flanged bends 30 FFK 30 Double flanged bends 22 1/2 FFK 22 9 Double flanged bends 11 1/4 FFK All flanged tees T Flanged tees with 45 flanged branch FFC All flanged cross tees TT 102 Double flanged tapers concentric FFR Double flanged tapers eccentric FFRe Single flange bells 109 Blank flanges X Blank flanges with tap hole XG Pipe caps with TYTON socket O Conversion flanges 1 Flanged socket duckfoot bends 90 EN 117 Flanged socket duckfoot bends 90 with Novo sockets MMN / MMNR 11 Plugs for screw-gland and TYTON sockets P 1 Screw rings for plugs 120 Screwed plugs for screw-gland socket PX 121 Double socket and double flanged hatchboxes: see sewage fittings programme 2.3 Special fittings 123 Single socket tees with 45 socket branch with screw-gland sockets C Socket-spigot tapers with screw-gland socket R Flanged socket bends 90 with screw-gland socket EQ Fittings with Puddle Flanges 124

8 Index Index Description Code Page Description Code Page Fittings for plastic pipelines (KS fittings) Notes 127 Flanged sockets E-KS 12 Flanged spigots F-KS 129 Flanged socket duckfoot bends 90 EN-KS 130 Double socket tees with flanged branch MMA-KS All socket tees MMB-KS 133 Double socket tapers MMR-KS 134 Double sockets with internal thread branch MMI-KS Sewage fittings Notes 137 Drilling saddle pieces with 90 branch with clay pipe socket SM with 45 branch with clay pipe socket SM with 90 branch with spigot for ductile iron pipe or for clay pipe SI 90 1 with 45 branch with spigot for ductile iron pipe SI TYTON coupling MM 142 Spigot end branches 67 ICI Double socket branch with TYTON sockets, with 67 /45 branch with spigot for ductile iron pipe MMI 144 Double socket branch with TYTON sockets, with 45 branch with clay pipe socket MMM 145 Pipe sealing cap with ventilation valve RVD 146 Manhole connection pieces with TYTON socket SA 147 Double flanged hatchboxes 14 Double socket hatchboxes 149 Double socket tees with 45 socket branch MMC Ductile cast iron (GGG) valves 3.1 Gate valves Type 4 with flanges Type 4 with flanges (short face-to-face length) Type 4 with Novo sockets Type 4 with Novo socket and spigot 0 1 Type 4 with screw-gland sockets 2 3 Type 4 with flange and screw-gland socket 4 5 (short face-to-face length) Type 4 with PE welding studs 6 7 Type 4 replacement and repair valve 9 with rotatable flanges Type 4 replacement and repair valve with rotatable flanges (short face-to-face length) Type 4 with welding studs for steel pipes Type 4 with blow-off pipes and PE welding studs Type 4 with blow-off pipes and welding studs for steel pipes Type 4 with blow-off pipes and PE welding studs Service connection valves Tapping valve TOP (top drilling) 1 11 Tapping valve TOPsi (horizontal drilling) Tapping valve TOP with PE connection Tapping clamps 16 Clapping bands 17 Type 4 with internal thread 1 Type 4 with PE welding studs 0 1 Type 4 with flange and PE welding stud 2 3 Type 4 with internal thread and PE welding stud 4 5 Gate valve combination Multi I 6 7

9 Index Index 1 Description Code Page Description Code Page 3.3 Hydrants Underground hydrants Type 304 design A 9 Type 305 design AD 201 Type 304 S design A Pillar fire hydrants Type 494 design AUD Type 495 design AFUD Various Flap valves Accessories 229 Laying tool for TYTON or Novo sockets 231 Hook wrench for screw-gland joints 232 Operating keys for valves Laying and assembly instructions Butterfly valves Typ 451 / 4510 with flanges Typ 451 / 4510 long face-to-face length with bypass Typ 4510 with Novo sockets Novo plug-in system Notes on Novo plug-in system 2 Gate valve type 4 with Novo sockets Gate valve type 4 with Novo socket and spigot 0 1 Butterfly valve type 4510 with Novo sockets Underground hydrant type 304 S Form A Pipe section with Novo socket M 220 Flanged socket duckfoot bends 90 with Novo sockets MMN / MMNR 11 Single socket tees with spigot and socket branch B 4 Novo collar U 221 Spigot tee with Novo socket MI All spigot tee IT Spigot pipe section S 224 PE adapter piece for Novo sockets Laying instructions for thrust resisting joints Notes on DVGW standard GW NOVO-SIT TYTON SIT TYTON SIT PLUS ( TSP ) Düker SMU Düker SPEZIAL NOVO-Grip III Assembly instructions for socket connections 264 Bolted-gland socket connection Assembly instructions for flanges 26 Assembly instructions for pressure pipes and fittings with flanges Assembly instructions for spot-drilling saddle pieces 271 Assembly instructions for spot-drilling saddle pieces Contacts

10 20 Back to summary 1 Joints for fittings, flanged pipes and valves made of ductile cast iron (GGG) 1

11 TYTON socket joints ( TYT ) acc. to DIN Screw-gland socket joints ( SMU ) PN 1) acc. to DIN Socket for fittings Socket for fittings 11.1 Socket for flanged sockets and collars Socket for pipes 4* ø d ø D , t Pipes 3,4 4,3 5,7 7,1 10,3 14,2 1,6 23,7 29,3 3 42, 59,3 79,1 102,6 129,9 1,3 Weight in kg socket Flanged Fittings sockets 2, 2,4 3,3 3,1 4,5 4,0 5,6 4,9,0 7,1 11,1 9,7 14,3 12,5 17,1 15,2 20, 1,6 27,6 24,3 31,7 27,6 42,3 36,2 71,2 59,1 95,4 79,,3 122,7 16,9 152,1,0 3,0 46,7 373,0 Gasket 0,13 0, 0, 0,22 0,37 0,4 0,67 0,77 1,09 1, 1,60 2,29 4,00 5,20 6,,00 9, 10 Socket for flanged sockets and collars 4* * ø d ø D t Pipes 3,4 4,3 5,7 7,1 10,3 14,2 1,6 23,7 29,3 Fittings 1,4 1, 2,2 2, 3,3 4,5 5,6,0 11,1 14,3 1,6 22,2 Weight in kg socket Flanged Screw sockets ring 1,3 0,4 1,6 0,90 1,9 1,30 2,4 1, 3,1 1,90 4,0 3,00 4,9 3,20 7,1 4, 9,7 6,30 12,5,10,2 10,,5 13, 25,00 2,5 31, Socket for pipes Gliding ring 0,05 0,06 0,06 0,07 0,0 0,10 0,11 0,17 0,21 0,30 0,35 0, 0,60 0,7 Gasket 0,06 0,0 0,10 0,12 0,15 0, 0,23 0,36 0, 0,66 0,4 1,05 1, 1,5 * acc. to manufacturer s standard * acc. to manufacturer s standard 1) higher pressures on request

12 24 Bolted-gland socket joints ( STB ) PN 1) acc. to DIN * * * * * * * 4* ø d Socket for pipes and fittings ø D Assembly instructions see page t * acc. to manufacturer s standard ø d 2 M 20 M 20 M 20 M 20 M 20 M 20 M 20 M 20 M 20 M 20 M 20 M 20 M 20 M 24 M 24 M 24 M 24 l n Pipes 26,6 32,2 45,3 45,3 61,2,0 101,0 2,9 232,4 1) higher pressures on request Weight in kg socket Boltedgland ring Gasket Flanged sockets collars 1,7 22,9 27,6 3,7 3,7 52,2 67,9 5, ,7 6,5 292,3 3,5 Socket for flanged sockets 2,7 4,0 5,0 6,0 7,1 10,6 13,0 15,0 20,9 2 34,1 44,0 5 75,0 12,5 142, 0,10 0,20 0,27 0, 0,60 0,70 0, 1,00 1,00 1, 1,90 2,30 2, 3,30 3, 6,90 7,90 Hammer head screws 0,24 0,24 0,24 0,24 0,27 5,5 5,5 6,0 7,7 7,7 10,0 13,0 1,0,5 22,0

13 TYTON socket joints with TYTON SIT TYTON socket joints with TYTON SIT PLUS Pressure classes as per EN 545 : Definitions as per EN 5 Allowable operating pressure PFA (bar) Allowable maximum operating pressure: PMA (bar) = 1.2 x PFA Allowable site test pressure: PEA (bar) = 1.2 x PFA + 5 Number of retaining segments allowable operating pressure PFA Pressure class C C C 64 C 64 C 64 C C C Deflection max Weight in kg TYTON SIT - gasket 0,17 0, 0,23 0,27 0,45 0,60 0,92 1,5 Number of retaining segments allowable operating pressure PFA Pressure class C C C C C 64 C 64 C C C C C allowable operating pressure PFA Pressure class C C C C C C C Deflection max Weight in kg TYTON SIT PLUS gasket 0,14 0, 0,20 0,23 0,45 0,60 0,95 1,25 1, 2,30 3,00 Assembling acc. laying instruction for thrust resisting joint TYTON SIT, page Assembling acc. laying instruction for thrust resisting joint TYTON SIT PLUS, page

14 Novo socket joints with NOVO-SIT Restrained socket joints for plastic pipelines with NOVO-Grip III 2 29 Locking ring Compression ring Gasket (GKS) 11.2 Note: The Novo socket does not change the standardised length of fittings and valves. 4 0 d D t Number of locking segments allow. o. p. PFA Pressure class allow. o. p. PFA Pressure class Deflection max C C C 25 C C C ,2 1,4 1, 0,15 0,20 0, C C 3 2,1 0,35 ø d 25 C 64 C 3 3, , plastic pipelines t PFA at SDR PFA at SDR 1 25 C 64 C 3 4, 0, /OD in mm 11 bar 17 bar C C 3 5,7 1, C C C C C C ,4,3 9,5,6 29,5 1,30 1, 2,00 2, 3,00 3, * C 1 36,6 3,60 Assembling acc. laying instruction for thrust resisting joint NOVO-Grip III, page Assembling acc. laying instruction for thrust resisting joint NOVO-SIT, page Weight in kg Novo Prechamber NOVO-SIT ring Weight in kg assembly set * Note: in, it is not possible to use the standard Novo socket for NOVO-Grip ; use only items with adapted geometry and marking for PE-HD pipes. 0,20 0,25 0,30 0, 1,00

15 30 Screw-gland socket joints with DÜKER thrust resisting joint SMU Screw-gland socket joints with thrust resisting joint Düker SPEZIAL 31 Locking ring Segment ring 11.2 allowable operating pressure PFA Pressure class C C C Deflection max Assembling acc. laying instruction for thrust resisting joint SMU, page Weight in kg locking ring 0,075 0, 0,1 allowable operating pressure PFA Pressure class C C C C C C C C Deflection max Weight in kg SPEZIAL screw ring and Locking ring Segment ring 0,22 0,26 0,31 0,37 0,52 0,67 10,35,00 Assembling acc. laying instruction for thrust resisting joint Düker SPEZIAL, page

16 32 Flanged joints PN 10 acc. to EN Flanged joints PN 10 acc. to EN PN Pipe ø d ø D * n = number of bolt holes Flange Neck Raised face C ,0 22,0 24,5 24,5 24,5 25,5 26,5 30,0 32,5 35,0 3,0 45,0 46,0 4 ø K n* ø L ø N h 3,0 41,5 43,0 45,0 4,0 55,0 60,0,0 70,0 75,0,0 5,0 95,0 105,0 115,0,0 135,0 155,0 175,0 5,0 ø d f Weight in kg 1,7 2,1 2,6 2, 3,3 4,0 5,0 6,9 9, 13,0 14,7 1 20,0 23,2 32, 44,3 5, 6 7,6 121,0 1,0 262,0

17 34 Flanged joints PN acc. to EN Flanged joints PN acc. to EN PN Pipe ø d * n = number of bolt holes ø D Flange Neck Raised face C ,0 22,0 24,5 26,5 2,0 30,0 31,5 36,0 39,5 43,0 46,5,0 5 60,0,0 ø K n* ø L ø N h 3,0 41,5 43,0 45,0 4,0 55,0 60,0,0 70,0 75,0,0 5,0 95,0 105,0 115,0,0 135,0 155,0 175,0 5,0 ø d f Weight in kg 1,7 2,1 2,6 2, 3,3 4,0 5,0 6,7 9,4 12,6 1 22,1 30,2 37,4 57,6 57,4 76, 91, ,0 213,0 315,0

18 Flanged joints PN 25 acc. to EN Flanged joints PN 25 acc. to EN PN Pipe ø d * n = number of bolt holes ø D C ,0 22,0 24,5 2 30,0 32,0 34,5 36,5 42,0 46,5 51,0 55,5 60,0 6 74,0 1,0 Flange Neck Raised face ø K n* ø L ø N h 39 41, ø d f Weight in kg 1,7 2,1 2,4 2, 3, 4,7 6,0,7 13,0 17,7 25,4 33,2,2 4 71,5 90,0 123, ,0 25, ,0

19 3 Flanged joints PN acc. to EN Flanged joints PN acc. to EN PN 4 Pipe ø d ø D * n = number of bolt holes Flange Neck Raised face C ,5 26,0 30,0 34,5 39,5 44,0 4,0 4 52,0 5,0 ø K n* ø L ø N h 3,0 41,5 43,0 45,0 4,0 55,0 60,0,0 70,0 75,0,0 5,0 95,0 ø d f Weight in kg 1,7 2,1 2,4 2, 3, 5,9,0 14,0 23,5 33,5 43,0 62,0 5 2,0 124,0

20 Hexagon head screws for flanges PN 10 and PN acc. to EN Hexagon head screws for flanges PN 25 and PN acc. to EN ø d 1 M M M M M M M 20 M 20 M 20 M 20 M 20 M 24 M 24 M 24 M 27 M 27 M 30 M 30 M 33 M 36 M 39 M 45 PN 10 l1* l2** qty per joint ø d 1 M M M M M M M 20 M 20 M 24 M 24 M 24 M 27 M 27 M 30 M 33 M 33 M 36 M 36 M 39 M 45 M 45 M 52 PN l1* l2** l1* = Screw length for connection with one washer l2** = Screw length for connection with two washers qty per joint ø d 1 M M M M M 20 M 24 M 24 M 24 M 27 M 27 M 30 M 33 M 33 M 33 M 36 M 39 M 45 M 45 M 52 M 52 PN 25 l1* l2** qty per joint ø d 1 M M M M M 20 M 24 M 24 M 27 M 30 M 30 M 33 M 36 M 36 M 39 M 45 PN l1* Not specified in EN l2** Special stipulations: M x : Thread length min. 44 mm, M20 x 90: Thread length min. 52 mm, M24 x /110: Thread length min. 60 mm; l1* = Screw length for connection with one washer l2** = Screw length for connection with two washers qty per joint

21 Flat gaskets for Flanges acc. to EN , type IBC Arrangement of bolt holes Number of bolts ø D Dimensions for gaskets with steel inlay. PN ø D PN s EN PN EN PN EN PN The number of bolt holes is always divisible by 4. The bolt holes are arranged symmetrically to the two main axes, but not on them. EN PN

22 44 Back to summary 2 Ductile cast iron ( GGG ) fittings and flanged pressure pipes 2

23 46 Inside and outside protection Flanged pipes and fittings can be supplied with the following coatings and linings: Cement mortar lining The cement mortar lining is acc. to DVGW data sheet W 347 and W 270 resp. EN 545 or EN 59 avoids corrosion prevents deposits and supports stable hydraulic characteristics. 2. Enamelling (glass lining) lining and coating Enamel is an effective protection against corrosion, abrasion and incrustation. A non detachable, chemical bounding to the cast iron avoids corrosion by undercutting. The layer thickness after application ( temperature 0 ) is between µ and µ. 3. Epoxy resin lining and coating The coating is acc. to RAL-GZ 662 with hot melted epoxy powder. The requirements of EN (pressure pipes and fittings) as well as of DIN T.2 (heavy corrosion protection for valves) are fulfilled Special coatings (outside) Various coatings on request.

24 Pressure pipes with cast-on flanges FFG-pipes Further lengths are available on request. Weight of pressure pipes with cast-on flanges PN 10 FFG-pipes e 10,2 10, 11,4 13,2 14,4 15,6, 1,0 20,4 22, 25,2 L max m pipe without flange 6,9 10,7 11,0,1 20,4 26,4 32,4 46,1 61,3 7,1 96,5 1,2 132, 0,6 211,3 26,5 332,1 1,7 477,7 5,2 7,0 932,0 PN 10 1,7 2,1 2,6 2, 3,3 4,0 5,0 6,9 9, 13,0 14,7 1 23,2 32, 44,3 5,5 6 7,6 121,0 PN 1,7 2,1 2,6 2, 3,3 4,0 5,0 6,7 9,4 12,6 1 22,1 37,4 57,6 57,4 76, 91, ,0 34 4,2 PN 25 1,7 2,1 2,6 2, 3, 4,7 6,0,7 13,0 17,7 25,4 33,2 4 6,0 90,0 123, ,0 25,0 Weight in kg one flange ,6,6 10,6 13,2 1 25,5 34,0 9,2 10,7 13,3,5 23,0 32,0 41,5 4,5 5 10,0 10, 12,7 15,9,7 2 3,0 49,5 5,5 69,5 94, ,4 14, 1,6 23,0 32,0 44,0 5 6,0 1,0 111,0,0 6,0,0,0 366,0 46,0 73,0 101,0 14,1, 21,0 26,0 3,5,0 7 92, ,0 223,0 24,0 3,0 414,0 525,0 1111,0 15,7 1, 24,0 29,5 41,5 56,5 73,0 104,0 143,0 2,0,0 31 3,0 462,0 51,0 6,0 1204,0 17,3 21,0 26,5 32,5 46,0 62,5,5 9 1, ,0 276,0,0 420,0 510,0 63,0 960, ,9 23,0 2 36,0,5 6,5, ,0 235,0 303,0 33,0 461, ,0 1034,0 1390, ,5 25,0 32,0 3 55,5 75,0 96,5 1,0 13 1,0 256,0 330,0 4,0 1,0 605,0 751,0 110,0 143,0 0 22,0 2 34,5 42,5 60,0 1,0 104,0 126,0 151, ,0 541,0 3, ,0 Weight in kg Length L in mm

25 Information about ductile cast iron fittings Ductile cast iron fittings will be delivered as follows: with TYTON socket with TYTON socket and pre-chamber for thrust resisting joint NOVO-SIT with screw-gland socket joint with bolted-gland socket joint with flanges Ductile cast iron socket fittings with TYTON sockets ( flangeless ) for use in potable water pipelines are designed for operating pressures as given in EN 545. Marking for ductile cast iron fittings 51 Ductile cast iron fittings with screw-gland or bolted-gland sockets for use in potable water pipelines are designed for operating pressures up to bar. Higher pressures on request. Ductile cast iron fittings with one flange or more, for the use in potable water pipelines are designed for operating pressures as given in EN 545. The operating pressure has to be mentioned in orders, because the flange dimensions of these fittings vary depending on the nominal pressures rates. Ductile cast iron fittings for the use in sewerage pipelines as per EN 59 are designed for operating pressures up to bar. Higher pressures on request. Ductile cast iron fittings for the use in gas pipelines as per EN 969 are available for operating pressures up to bar on request. All German manufacturers member of the Fachgemeinschaft Guss-Rohrsysteme (FGR-EADIPS) association mark all ductile cast iron products manufactured by them with the label FGR, which is equivalent to a quality mark. In addition, fittings are marked with the DVGW sign, nominal diameter, the casting day and bends with the respective angles in degrees. Flanged fittings bear a cast-on or stamped indication of the nominal pressure ranges PN 10 up to PN. Socket fittings are not marked with the nominal pressure range. The material ductile cast iron is identified by 3 dots (l l l), arranged in a triangle symbol, positioned on the exterior surface of the fittings. In special cases, further indications may be provided > All indicated weights are valid for fittings with cement-mortar linings < Coating: see page 47 Inside and outside protection.

26 52 Flanged sockets E with screw-gland or TYTON socket 53 * * * 4 0 Lu e 10,2 10, 11,4 13,2 14,4 15,6 * acc. to manufacturer s standard on request also with Standard socket and Universal pre-chamber Weight in kg with TYTON socket PN 10 PN 5,9 5,9 6,0 6,0 11,0 11,0,0,0 10,5 10, ,5 25,5 10,3 10,3 14,0 14, ,6 14,6 26,0 26,0,7,7 2,5 2,5 23,0 23,0,0,0 33,5 33,5 61,5 61,5,0,0 96,0 96,0,0,0 130,0 135,0 1,0 4,0 203,0 3,0 176,0 270,0 295,0 453,0 466,0 603,0 621,0 22.2

27 Flanged sockets EU Flanged sockets EU * * * Compensation length Lu z 2) Tol. ± 30 ± 30 ± 30 ± ± ± ± ± ± e with screw-gland socket PN 10 PN 4,3 4,3 5,4 5,4 6,0 6,0 10,5 10,5 13,2 13,2,0,0 21,6 21,6 31,5 31,5 Weight in kg 1) with TYTON socket PN 10 PN,6,6 10,5 10,5 14,5 14,5,0,0 24,0 24,0 32,5 32,5 with bolted-gland socket PN 10 PN Compensation length Lu z 2) Tol. ± ± ± ± ± ± ± ± ± ± ± ± ± 60 e 10,2 10, 11,4 13,2 14,4 15,6, 1,0 20,4 22, 25,2 with screw-gland socket PN 10 PN 41,0 41,0,0 51,0 56,5 62,0 91,0 92,0 Weight in kg 1) with TYTON socket PN 10 PN 45,0 45,0 54,0 5,0 66,0 70,0 7 91,0 95, ,5 145,5 176,6 0,0 242,0 262,0 21,0 27,0 3,0 355,0 536,0,0 900,0 1,0 with bolted-gland socket PN 10 PN 70,5,0 103,0 142,0 4, ,0 320,0 74,0 95,0 11 3, ,0 263,0 370,0 l * acc. to manufacturer s standard 1) without screw- or bolted-gland rings 2) Nominal dimension for laying. If flanged sockets are applied as gate valve dismantling joints, the moving tolerance has to be limited to 10 mm. on request also with Standard socket and Universal pre-chamber 1) without screw- or bolted-gland rings 2) Nominal dimension for laying. If flanged sockets are applied as gate valve dismantling joints, the moving tolerance has to be limited to 10 mm. on request also with Standard socket and Universal pre-chamber

28 Flanged spigots F Collars U * * * ø d L L * acc. to manufacturer s standard e 10,2 10, 11,4 13,2 14,4 15,6, 1,0 20,4 22, 25,2 PN 10 5,5 6,2 9,5,5 10,5 14,0 1 25,5 39,5 47,6 62,1,5 132,0 121,0 3,3 229,5 314,3 35 3,0 462,0 Weight in kg PN PN 25 5,5 6,2 9,5,5,5 10,5 13,5 14, ,5 25,5 35,1 39,5 4 47,6 5,0,9 70,0,6 106,4 14,0 1,4 146,3 20,9 22, ,0 395,3 34,0 526,0,0 1260,0 PN,5 15,0 1,0 26,5,0 59,5 73,4 92,5 131, ø d Lu e 10,2 10, 11,4 13,2 14,4 15,6, 1,0 20,4 22, 25,2 Weight in kg 1) DIN DIN with screw-gland sockets with bolted-gland sockets,5 11,0,1 9,7 12,5 15,2 23,2 31,3 3,5 49,5 63,2 123,1 14,5 24, 30,0 3 51,0,0 73, ,1 7,4 2,0 256,7 313,0 421,2 55,0,0 10 1) Operating pressures see page without screw- or bolted-gland rings Novo socket types see page 2 on request also with Standard socket and Universal pre-chamber 22.2

29 Single socket bends 90 MQ acc. to manufacturer s standard Double socket bends 90 MMQ 5 59 Weight in kg 1) Lu e with screw-gland sockets Weight in kg 1) with TYTON sockets with bolted-gland sockets L Lu 60,0,0 215,0 102,4 123,0 14, 174,5 226,0 2,0 330,0 410,0 430,0 5,0 645,0 720,0 0,0 e 10,2 10, 13,2 14,4 15,6 with screw-gland socket 9,5 11,0 15,0,0 10,,1 23, 43,2 70,0 96,0 with TYTON socket 11,2 1 25,4 43, 76,1 3, ,3 235,4 314,0 473,0 644,5 with bolted-gland socket,0 156,0 225,0 325,0 42,0 1,0 * * * * * 4* * * * 0* 900* 0* 1* 60,0,0 5,0,0,0,0 175,0 225,0 2,0 330,0 410,0 430,0 45 5,0 645,0 720,0 0,0 9,0 10,0 1205,0 10,2 10, 11,4 13,2 14,4 15,6, 1,0 20,4,0 10,5 14,0,6 10,5 15,1,2 31,3 54,0 69,,5 11,0,2 20,5 32,4 52,9 72,4 104, 20,0 214,4 314,3 4,0 6, ,0 00, ,0 35,0 662,0 1) Operating pressures see page without screw- or bolted-gland ring on request also with Standard socket and Universal pre-chamber Operating pressures see page 1) without screw- or bolted-gland rings * acc. to manufacturer s standard on request also with Standard socket and Universal pre-chamber

30 Single socket bends 45 MK 45 acc. to manufacturer s standard Double socket bends 45 MMK L Lu e 10,2 10, 11,4 13,2 14,4 15,6 with screw-gland socket 10,0 14,5 9, 14,9,4 31,3 42,0 56,2 6,0 93,0 106,0 Operating pressures see page 1) without screw- or bolted-gland ring on request also with Standard socket and Universal pre-chamber Weight in kg 1) with TYTON socket 10,,2 20,5 33,5 44,3 59,4 6,0 91,0 106,0 1,5 441,0 with bolted-gland socket 7 105,0 143,0 2,0 * * Lu TYTON screw-gland socket Lu bolted gland socket Lu Standard socket 25,0 330,0 370,0 13,0 145,0,0 55,0,0 75,0 5,0 110,0 130,0,0 175,0,0 220,0 2,0 415,0 460,0 5,0 515,0 370,0 3,0 4,0 5,0 Operating pressures see page 1) without screw- or bolted-gland rings * acc. to manufacturer s standard on request also with Standard socket and Universal pre-chamber e 10,2 10, 11,4 13,2 14,4 15,6, 1,0 20,4 22, 25,2 with screw-gland sockets,0,5 5,6 7,1 9,2 12,3,3 24,5 34,5 4,5 70,2 93,9 Weight in kg 1) with TYTON sockets,3 10,3 14,5 1,9 25,9 3,9 55,1 1,0 91,3 139,9 145, 6,6 312,1 496, 57,0 76,0 1,0 1572,0 with bolted gland sockets 1,0* 106,0* 1,4,2 with Standard sockets 1,0* 106,0* 1,4,2 2096,0 22.2

31 Single socket bends 30 MK 30 acc. to manufacturer s standard Double socket bends 30 MMK 30 acc. to DIN Weight in kg 1) Weight in kg 1) Lu TYTON screw-gland socket Lu bolted-gland socket e with screw-gland sockets with TYTON sockets with bolted-gland sockets L Lu e 10,2 10, 13,2 14,4 15,6 with screw-gland socket 10,0 14,5 7,4 10,1 14,0 1,6 29,2 36,7 4,0 5 71,0 with TYTON socket 7,4 10, 15,1 20,0 30, 3,9 52,9 56,0 76, ,0 26,0,0 with bolted-gland socket 64,0,0 120,0 15,0 * * * 4* ,2 10, 11,4 13,2 14,4 15,6, 1,0 20,4,0 10,0 13,0 6, 9,7 11,6 15,7 23, 31,3 45,9 63,7 4, 9,9 14,3 1 23, 34,6 52,4 74,5 9,1 145,0 123,7 6, ,0 496,0 2,0 1020,0 74,0* 94,0* 145,5 3,0 Operating pressures see page 1) without screw- or bolted-gland ring on request also with Standard socket and Universal pre-chamber Operating pressures see page 1) without screw- or bolted-gland rings * acc. to manufacturer s standard on request also with Standard socket and Universal pre-chamber

32 Single socket bends 22 1 /2 MK 22 acc. to manufacturer s standard Double socket bends 22 1 /2 MMK Weight in kg 1) 0 L Lu Operating pressures see page Weight in kg 1) e 10,2 10, 13,2 14,4 15,6 with screw-gland socket 10,0 9,2 13,5 17,3 2 36,0 4 53,0,0 1) without screw- or bolted-gland rings with TYTON socket,1 9,7 15,1 1 29,2 3,2 52,0 76,7 9 3,0 336,0 460,0 with bolted-gland socket 60,0 74,0 110,0 15,0 * * Lu TYTON screw-gland socket 175,0 260,0 90,0 35,0,0 45,0,0 55,0,0 75,0 90,0,0 110,0 120,0 135,0 155,0 5,0 220,0 2,0 25,0 Lu bolted-gland socket 0,0 Lu Standard socket 2,0 e 10,2 10, 11,4 13,2 14,4 15,6, 1,0 20,4 22, 25,2 with screw-gland sockets 9,5 12,5 4,9,6 11,5 14,6 21,0 30,5 42,1 62,1 74,5 with TYTON sockets 13,5 1 22,7 33,5, 6 3,2 112,9 154,4 242,0 311,0 422,0 593,0 20,0 1224,0 with bolted-gland sockets 70,0*,0* with Standard sockets on request also with Standard socket and Universal pre-chamber Operating pressures see page 1) without screw- or bolted-gland rings * acc. to manufacturer s standard on request also with Standard socket and Universal pre-chamber

33 Single socket bends 11 1 /4 MK 11 acc. to manufacturer s standard Double socket bends 11 1 /4 MMK Weight in kg 1) 0 L Operating pressures see page Lu e 10,2 10, 13,2 14,4 15,6 with screw-gland socket 6,5,5 11,5 7,1 9,2 12,4,7 24, 33,5 44,0 4 56,0 1) without screw- or bolted-gland ring Weight in kg 1) with TYTON socket 7,6 9, 14,0 1, ,0 66,9 3,2 3, ,0 with bolted-gland socket 54,0,0 95,0 15,0 25,0 292,0 * * Lu TYTON Lu screw-gland socket 63,0,0 25,0 30,0 35,0 35,0,0 45,0,0 60,0,0 70,0 70,0 5,0 95,0 95,0 110,0 110,0 120,0 130,0,0 0,0 bolted-gland socket Lu Standard socket 175,0 e 10,2 10, 11,4 13,2 14,4 15,6, 1,0 20,4 22, 25,2 with screw-gland sockets 11,5 6,5,1 10,6 13,4 20,5 2,1 3,3 49,7 6 with TYTON sockets 7,6,6 13,0,7 21,1 30,2 45,4 62,1 73,4 92,5 6,4,3 201,0 294,3,0 6,0 6,0 107,0 with bolted-gland sockets 64,0* 7* 120,5 15,0 4,0 23,0 with Standard sockets 14, on request also with Standard socket and Universal pre-chamber Operating pressures see page 1) without screw- or bolted-gland rings * acc. to manufacturer s standard on request also with Standard socket and Universal pre-chamber

34 6 Double socket tees with flanged branch MMA Double socket tees with flanged branch MMA 69 Weight in kg 1) 1 * * * 2 Lu l u ) Operating pressures see page without screw- or bolted-gland ring on request also with Standard socket and Universal pre-chamber e 1 e 2 with screw-gland sockets 10,5 12,5 13,5,0,5 1,0 Weight in kg 1) with bolted-gland sockets with TYTON sockets * acc. manufacturer s standard 1 2 * * * * * * * * * * * * * * * * * * Lu l u e 1 Operating pressures see page 1) without screw rings * acc. manufacturer s standard on request also with Standard socket and Universal pre-chamber e 2 with screw-gland sockets 11, 13,0 12,5 15,1 13,0 14,0 15,0,2 17,4 17,3 1 1,9 20,5 22,1 21,6 22,7 23, 24, 2,0 30, 2 30,0 31,3 32,4 3 3,9 46,4 with bolted-gland sockets with TYTON sockets 13,0 13,0 13,5 14,0 14,9 15,7,9 1 1,6,4 20,0 21,6 22,7 24,3 23, 24,3 25,9 2 31,3 32,9 30, 31,3 32,9 34,0 41,0 43,2 49,7 22.2

35 Double socket tees with flanged branch MMA Double socket tees with flanged branch MMA Weight in kg 1) 1 2 Lu lu e 1 e 2 with screw-gland sockets with bolted-gland sockets with TYTON sockets * * * * * * * * * * * ,2 10, 10,2 10,2 10, 36,0,0 42,0 52,4 53,5 62,5 51, 52,9,9 72,4 90,7 63,0 62,0 2,0 9,5 101,0 114,0 11 / 122,0 79,9 1,0 93, ,5,5 14 /,0 15,0 / 172,0 45,4 4,0 4,1 56,2 60,5 75,6 5,9 60,5 70,7 70,0 91, 95,6 73,4 73,4 9,1 9 9,0 114,0 11 /,0 92,9 94,0 105, 113,9 115,0 132,3 14 /,0 17 / 170,0 1 * 4* 2 4 * * Lu lu e 1 10, 11,4 e 2 10, 10,2 10, 11,4 10, with screw-gland sockets Weight in kg 1) with bolted-gland sockets 94,0 95,0 104,0 114,0 13 4,0 / 110,7 110,7 130,0 1,4 174,4 215,0 / 220,0 244,0 with TYTON sockets 110,0 110,0 132,0 145,5 1,5 220,0 / 226,0 230,0 / 236,0 260,0 / ,0 104,0 13,0 1,0 156,0 1,0 / 3,0 222,0 / 236, Operating pressures see page 1) without screw rings * acc. to manufacturer s standard on request also with Standard socket and Universal pre-chamber Operating pressures see page 1) without screw rings * acc. to manufacturer s standard on request also with Standard socket and Universal pre-chamber

36 Double socket tees with flanged branch MMA Double socket tees with flanged branch MMA * * * * * * * * * * * * * * * * * * * * 0 Lu lu e 1 13,2 14,4 15,6 e 2 10, 13,2 10,2 10, 13,2 14,4 10,2 10, 13,2 15,6 with screw-gland sockets Weight in kg 1) with bolted-gland sockets 12,5 13,6 1 17,6 233, 26,0 / 256,5 3,0 / 336,4 361,0 / 36,0 266,0 27,0 263,0 262,0 2 31,0 276,0 / 27 31,0 / 392,0 46,0 / 42,0 59 / 523,0 5,0 / 563, ,9 322,9 29,0 433,0,2 432,0 / 435,0 / 429, / 65, / 65, 755,0 / 755,0 with TYTON sockets 170,0 174,0 17,0 210,0 2,0 / 245,0 315,0 / 330,0 323,0 / 33 24,0 260,0 263,0 266,0 26 3,0 25,0 / 261,0 363,0 / 374,0 4,0 / 464,0 41,0 / 5,0 532,0 / 545, ,0 332,0 342,0 415,0 431,0 420,0 / 423,0 39,0 / ,0 / 62,0 630,0 / 6,0 7,0 / 743, * * * * * * 900 * * 0 * * * * 0 900* Lu lu e 1, 1,0 20,4 22, 25,2 e 2 10, 13,2 14,4, 10, 13,2 1,0 10, 13,2 14,4 15,6, 1,0 13,2 15,6 1,0 13,2 15,6 1,0 20,4 with Standard sockets 2130, ,0 293,0 Weight in kg 1) with bolted-gland sockets with TYTON sockets,0 470,0 472,0 / 5,0 475,0 / / 561,0 56 / 572,0 10,0 / 20,0 / 6,0 930,0 / 9,0 / 6,0 561,0 / 691,0 / 63 / 644,0 / 1205,0 / 124,0 / 94 / 960,0 / 96 / 95,0 / 1135,0 / 10,0 / 1296,0 / 142,0 / 55,0 / 1,0 / 2,0 l Operating pressures see page 1) without screw rings * acc. to manufacturer s standard on request also with Standard socket and Universal pre-chamber Operating pressures see page 1) without screw rings * acc. manufacturer s standard on request also with Standard socket and Universal pre-chamber

37 All socket tees MMB All socket tees MMB Weight in kg 1) 1 * * * 2 * * * * * * * * * * * * Lu lu e 1 Operating pressures see page 1) without screw rings * acc. to manufacturer s standard on request also with Standard socket and Universal pre-chamber e 2 with screw-gland sockets 11,0 12,5 13,5,0 1 1,0 10,1 10,5 11,0 13,0 11,7 12,5 13,0 14,6 14,9,2,5,6 1,1,4 Weight in kg 1) with TYTON sockets 10, 11,9 14,0 14,0 15,1 13,0 15, ,5 20,5 21,6 23,2 with Standard sockets 1 * * 2 * * * * * * * Lu lu e 1 Operating pressures see page 1) without screw rings * acc. to manufacturer s standard on request also with Standard socket and Universal pre-chamber e 2,1, 9,1 9, with screw-gland sockets,4 20,0 22,7 22,7 25,0 2 25,5 26,5 2,0 30, 31,9 35,0 3,0 3,0 3,9 43,0 44,5 51,5 61,0 44,0 44,5,0 4 55,0 59,4 61,0 74,0 1,0 with TYTON sockets 22,7 22,5 24, 25,4 30,2 30, 30,2 31,3 2,0 3 31,9 3 42,1 45,9 45,4 46,4 46,4 51, 56,2,9 44,0 44,5 56,7 5,3 5 62,4 66,4 2,1 92,1 with Standard sockets 22.2

38 All socket tees MMB All socket tees MMB 76 Weight in kg 1) Lu lu e 1 e 2 with screw-gland sockets with TYTON sockets with Standard sockets * * 4* * ,2 10, 11,4 10,5 10,2 10, 10,2 10, 11,4 10,2 10, 74,0 7 91,0 103,0 115,0 3,5 6,5 94,0,0 10,0 122,0 145,0 74,0 7,0 11, 126,4,0 95,5 93,4 94,0 111, 11, 123,7 175,5 110,0 110,0 146,5 155,0 2,5 174,0 1,0 15,0 131,0 134,0 136,0 145,0 155,0 170,0 13,0 5,0 233,3 1 * * 0* 900* 2 2) Lu lu e 1 13,2 14,4 15,6, e 2 10,2 10, 13,2 10, 13,2 14,4 10, 13,2 14,4 15,6 13,2, with screw-gland sockets Weight in kg 1) with TYTON sockets 1 205,0 222,0 231,0 236,0 245,0 325,0 3,0 253,0 264,0 275,0 370,0 355,0 445,0 545,0 49,0 490,0 520,0 760,0 5,0 20,0,0 525,0,0 with Standard sockets 22.2 Operating pressures see page 1) without screw rings * acc. to manufacturer s standard on request also with Standard socket and Universal pre-chamber Operating pressures see page 1) without screw rings * acc. to manufacturer s standard on request also with Standard socket and Universal pre-chamber

39 All socket tees MMB Double socket tapers MMR 7 79 Weight in kg 1) 1 2 Lu lu e 1 e 2 with screw-gland sockets with TYTON sockets with Standard sockets 0* 1* 1* 00* ,0 20,4 22, 25,2 10, 13,2 15,6, 1,0 13,2 14,4 15,6, 20,4 13,2 15,6, 1,0 20,4 22, 13,2 15,6, 1,0 20,4 22, 25,2, , ,0 1102,0 110,0 1115,0 9,0 11,0 1,0 125,0 1536,0 1770,0 90,0 2120,0 21,0 2360,0 0,0 2,0 24,0 2520,0 26,0 29,0 3,0 3900,0 l 1 * * 2 * * * * * Lu e 1 e 2 with screw-gland sockets 10,5 13,5 5,4 15,2 14,0 7,6,1 Weight in kg 1) with TYTON sockets 9, Operating pressures see page 1) without screw rings * acc. to manufacturer s standard on request also with Standard socket and Universal pre-chamber Operating pressures see page 1) without screw rings * acc. to manufacturer s standard on request also with Standard socket and Universal pre-chamber

40 Double socket tapers MMR Double socket tapers MMR * 175 Lu e 1,1 10,2 e 2,1 with screw-gland sockets 9,9 9, 14,0 12,3 13,4 12,6 36,5 25,9 1, ,0 33,0 2 26,5 2,0 30,2 29,5 55,1 41,0 3 36,7 7,0 4,0 4 45,0 Weight in kg 1) with TYTON sockets 11,3 11, 13,0 15,1 15,7 15,7 22,7 20,5 22,7 22,1 33,0 2 31,3 34,6 34,6 29,5 36,2,2 43,2 43,7 7,0 4,0 4 45, * * * 4 * * * * 0 * * 1 Lu Weight in kg 1) e 1 10, 11,4 13,2 14,4 15,6, 1,0 20,4 22, 25,2 e 2 10,2 10,2 10, 10,2 10, 10,2 10, 10, 13,2 13,2 14,4 14,4 15,6 13,2 15,6, 1,0 20,4 20,4 22, with screw-gland sockets 79,9 73,5 6,0 70,0 139, ,6 101,0 133,0,0 139,5 26 with TYTON sockets,0 73,5 6,0 70,0 120, ,0 127,4 134,0 143,6,7 155, ,0 15, 16, 296,0 341,5 252,5 275,0 2,0 296,0 32, ,0 460,0 420,0 2,0,0 1,0 1260,0 l Operating pressures see page 1) without screw rings * acc. to manufacturer s standard on request also with Standard socket and Universal pre-chamber Operating pressures see page 1) without screw rings * acc. to manufacturer s standard on request also with Standard socket and Universal pre-chamber

41 Single socket tees with flanged branch A acc. to manufacturer s standard Single socket tees with flanged branch A acc. to manufacturer s standard 2 3 Weight in kg 1) 1 2 Lu l z e 1 e 2 with screwgland socket with TYTON socket Lu l z e 1 e 2 with screwgland socket 10,0 10,5 12,3 13,0 15,1 15,7 15,5,0 1 1,7 Weight in kg 1) with TYTON socket 12,3 13,0 15,7,2 15,5,0 1 1, , 1,0 10, 1 1,0 20,0 21,6 26,0 24, 24,0 26,4 25,0 2,5 30,4 46,0,0 55,0 5,0 64, 1,5 121,0 126,5 16,0 1 1,0 22,5 23,5 26,0 23,0 24,0 2,0 29,2 2,5 30,4 46,0 55,0 51,0 5,0 60,0 1,5 121,0 126,5 16,0 10,0 l Operating pressures see page 1) without screw ring Operating pressures see page 1) without screw ring on request also with Standard socket and Universal pre-chamber on request also with Standard socket and Universal pre-chamber

42 Single socket tees with socket branch B acc. to manufacturer s standard Double flanged bends 90 Q Lu lu z e Operating pressures see page 1) without screw rings on request also with Standard socket and Universal pre-chamber e 2 Weight in kg 1),5 14,0 15,0,0 25,0 45,0 2,0 * * * L e ,2 10, 5 11,4 13,2 0 14, ,6 0, 1 1,0 1 20,4 1 22, 14 25,2 * acc. to manufacturer s standard PN 10 5,5 10,2 10,2 12,9 1,9 29,3 36,2 5,3 2,1 102,1 144,7 234,0 266,0 370, ,0 745,0 1010,0 Weight in kg PN PN 25 5,5 5,5 10,2 10,2 10,2 11,0 12,9 12,9 22,0 22,0 29,2 33,5 36,2 45,9 5,3 1,0 2,1 1,6 111,2 155,0 157, ,0 241, ,0 4,0 346,0 420,0 575,0 720,0 672,0 36, ,0 2,0 2970,0 PN 5,5 10,2 11,0 12,9 23,2 33,5 53,0 101,0 144,2 24,0 30,0 375,0 45,0 22.2

43 Double flanged duckfoot bends 90 N Double flanged bends 45 FFK * * * 4 * 0* L c d e 10,2 10, 11,4 13,2,0 1, 1,0 20,4 PN 10 10,5 10,5,0 15,7 1,9 2 34,6 55,6 4,0 117, ,5 374, 53,9 752,0 926,0 2311,0 Base borehole on request. * acc. to manufacturer s standard Weight in kg PN PN 25 10,5 10,5 10,5 10,5,0,0 15,7 15,7 1,9 25,4 2 22,7 3,9 31,0 55,6 4,5 4,0,5 117,7 114,0 142,0 154, 24, , ,0 335,0 42,0 6,0 705, ,0 106,0 26,0 PN 10,5 10,5,0 15,7 25,4 23,9 35,5 60,0 101,0 145,0 201, ,0 2,0 6 * * * Short length acc. to manufacturer s standard * * * L e , , 11, , , ,6 51, 632 1,0 7 20, , ,5 11,0 PN 10 10,3 12,6 1 21,6 32,4 60,9 90,2 96,1 11,0 15, 2,0 4 3,0 727,9 64,0 5,0 12 Weight in kg PN PN 25 10,3 10,3 12, ,6 33,0 32,4 34,0 60,9 101,0 90,2 102,6 111,0 129,1 1,3,0 1,0 235,4 259, ,0 41,0 392,0 442,0 535,0 4,0 65, ,0 26,0 6 94, ,5 114,5 17,0 PN 10,3 1,3 24,5 41,5 3,0 11,0 141,0 6,0 24,0 264, ,5 14,5 246,0 * acc. to manufacturer s standard 22.2

44 Double flanged bends 30 FFK 30 acc. to manufacturer s standard Double flanged bends 22 1 /2 FFK 22 acc. to manufacturer s standard L e 9,5 10,2 10, 11,4 13,2 14,4 15,6, 1,0 20,4 PN 10 10,0 13,7 15,7 22,7 35,1 4 6,0 70,2 5,9 143,0 129,5 230,0 360,0 43 Weight in kg PN PN 25 10,0 10,0 13,7 15,7 1,0 22,7 22,0 35,1 33,0 44,0 90,0 6,0 73,0 71,0,0 2,5 104,5 153,0 13, , ,0 4, ,0 101,0 PN 10,0 21,0 25,0 42,0,0,0 142,0 172,5 251,0 275,0 29, L e 10,2 10, 11,4 13,2 14,4 15,6, 1,0 20,4 22, 25,2 PN 10 10,7 13,6 1 22,1 34,6 4,6 6,6 63,7,5 135,0, 203, ,0 575,0 Weight in kg PN PN 25 10,7 10,7 13, ,1 22,0 34,6 33,5 4,6 4,5 6,6 72,0 64, 7,0 95, ,0 13, ,0 245, , ,0 55,0 5,0,0 127,0 15,0 PN 10,7 21,0 25,0 42,5, ,0 5,5 251,0 345,0 26,0 22.2

45 Double flanged bends 11 1 /4 FFK 11 acc. to manufacturer s standard All flanged tees T L e 10,2 10, 11,4 13,2 14,4 15,6, 1,0 20,4 22, 25,2 PN 10 10,6 13,7 1 23,2 34,6 4 69,1 5 71, 10,0 106,9 170,0 2,0 321, 5,0 Weight in kg PN PN 25 10,6 10,6 13,7 1 1,0 23,2 22,0 34,6 54,5 4 4,0 69,1 69,5 53,0 70,0 72,5 9,5 11,0 145,0 1, , ,0 370,0 396,0 490,0 39 6,0 722,0 70,0 1111,0 1520,0 PN 10,6 21,0 25,0 3,0 96,5 13,5,5 213, ,5 1 2 * * * * L l e 1 * acc. to manufacturer s standard e 2 PN 10 10,5 12,5 15,0 15,5,5 14,7 15,7, ,7,4 20,2 21,3 23, 24,3 24, 25,4 2 2,1 Weight in kg PN PN 25 14,7 14,7 15,7 15,7,4, ,7 22,7,4 20,4 20,2 24,5 21,3 22,0 23, 22,5 24,3 23,0 24, 24,0 25,4 30,0 2 26,0 2,1 32,5 PN 14,7 15,7, ,7 1,6 24,5 22,0 24,0 24,5 25,5 26,0 2,5 31,0 22.2

46 Gewicht in kg All flanged tees T All flanged tees T * acc. to manufacturer s standard * * * * * * L l e 1,1 e 2 PN 10 29,7 30, 31,3 31,9 32,4 34,6 32,2 5,0 60,0 64,0 45,4 45,4 45,4 47,4 4,0 51,3 51, 6,0 64,0 74,0 75,0 75,0 7,3,7 91, 95,5 96, ,6 104,2 113,0 10,0 114,0 121,0 131,0 PN 29,7 30, 31,3 31,9 32,4 34,6 36,2 5,0 60,0 64,0 45,4 45,4 45,4 47,4 4,0 51,3 51, 6,0 64,0 74,0 75,0 75,0 7,3,7 91, 95,5 96, ,6 104,2 103,0 10,0 114,0 121,0 131,0 PN ,5 30,5 41,6 42,1 33,5 49,1 56,5 61,5 64,0 5 5,5 61,0 54, ,0 103,0 75,5 110,7 94,0 121,0 105,5 106, ,0 15,0 111,0 1,0 130,0 12 4,0 PN 33,0,0 34,5 45,9 35,5 3,0 5,3 6,5 73,5 74,0 6,5 75,1 73,0,0 94, ,0 123,1 95,5 12, ,0 139,5 1,0 141,0 142,0 143,0 145,0 179,5 4,0 174,0 1,0 * acc. to manufacturer s standard * * * * 4 L l e 1 10,2 10, 11,4 e 2 10,2 10,2 10, 10,2 10, 11,4 PN ,0 131,2 130,1 131, 135,0 137,7 137,7 154,4,6 7,4 170,6 171,2 15 2,2 15, 6,0,2,5 230,0 249,5 232,0 242,0 24,0 22,0 290,0 292,0 313,0 PN 120,0 1,4 12, ,0 151,5 151,0 1,4 15, 170,5 2,2 15,,3 223,6 225,0 243,0 244,0 2,0 25, , PN ,0 7,4 173,0 145,0 14 0,0 2,0 172,0 2,0 16,0 1 2,0 2,0 213, 20 22,0 2,0 254,0 PN 1,0 11,0 13, ,0 210,0 2,0 222, ,0 254,0 25,0 262, ,0 30,0 330,0 356,0