NEW! Gm toproll balance SlidinG door SyStem product report SlidinG door SyStemS

Transcription

1 NEW! GM TOPROLL BALANCE SLIDING DOOR SYSTEM PRODUCT REPORT SLIDING DOOR SYSTEMS

2 GM TOPROLL BALANCE SECURE HANGING SLIDERS Glass is increasingly used in interior design. Ever larger areas of glass are used nowadays, both internally and externally. Openness and transparency are considered increasingly important in the design of living space. Architects require extra-slim guide rails and glass retainer profiles, and this has led Glas Marte to pioneer new products. At the heart of this range is our GM TOPROLL BALANCE sliding door system. As one of the most elegant frameless sliding door systems available in Europe, GM TOPROLL BALANCE offers not only reliable and easy operation, but also soft closing, individual adjustment and simple installation. But beyond all the proven technical properties, you expect one thing above all: a peerless sense of space. It is best that you should see for yourself.

3 Graceful Silent Soft braking FullY closing Simple to install Easy adjustment Timeless

4 GM TOPROLL BALANCE ALL THE ADVANTAGES AT A GLANCE Minimal height, highest level: the set-up Centered glass mounting Two is always better than one Clean, free-running: the guidance technology With an overall height of only 50 mm, GM TOPROLL BALANCE is one of the lowest profile sliding door systems available in Europe. Thanks to the small distance between the glass and the guide rail and the absence of a brush seal, a virtually closed construction is achieved. The reliable, vertical mounting of our glass doors is based on a simple principle: two rollers on two guide rails. Our doors slide with exceptional smoothness over the guide rails on plasticcoated ball-bearing rollers made from stainless steel (instead of conventional "trough" or "trench" guides which gather dirt easily). 60 Conventional sliding doors Glas Marte system technology Smallest wall aperture height Glass height, doors 3 Glass height, fixed panel

5 Silicone-free fitting No glass cutting Built-in high performance Glass weights up to 80 kg possible Flexible mounting on wall and ceiling The glass doors of the GM TOPROLL BALANCE system are held in place by a highly efficient bonding and gripping system without use of silicone. With GM TOPROLL BALANCE, no glass processing or cutting is required. With glass weights of 60 or 80 kg (double rollers), GM TOPROLL BALANCE offers the best possible combination of installation height, maximum glass weight and roller guide technology. Naturally it comes with the Softstop function. GM TOPROLL BALANCE can be mounted on walls or ceilings in single or double-leaf configuration. A combination with fixed panels can be integrated into the system. However, the design width of 60 mm remains unchanged Only 50 mm high! GM TOPROLL BALANCE boasts guide rails with smooth profile surfaces, without visible grooves or slots. All visible profile cross-sections are sealed with end caps. Thanks to the use of tempered safety glass (ESG), the sliding elements need no surrounding "frame". The 8 and 0mm tempered safety glass panes can be subjected to an HS test (recommended even where not legally required). Laminated / tempered safety glass up to 0.76 mm can be used

6 Also suitable for all-glass installations Soft closing soft stopping Installation in the smallest recess GM TOPROLL BALANCE is also suitable for all-glass installations (glass or glass solutions with fixed side-elements and skylight glazing) With leaf widths greater than 80 mm, the Softstop function provides reliable braking for doors with a pane weight of up to 80 kg. Quite simply: Installation in wall recesses (pocket mounting) is particularly easy thanks to the diagonal roller mechanism and the components carried on the sliding element The one or two-sided Softstop function (damping feature) ensures that the sliding glass is braked in good time instead of colliding abruptly with the wall or end stop. Furthermore, if the door is not fully closed when you shut it manually, no gap remains; instead the door closes automatically. The result: less noise, less odour, less heat transfer. And above all, less risk of injury (glass breakage or trapping). The diagonal roller mechanism makes installation in a wall recess (pocket mounting) far easier.

7 GM TOPROLL BALANCE ADDITIONAL COMPONENTS Easy adjustment up or down Everything from one source The GM TOPROLL BALANCE sliding door glass is easily adjustable by up to 3.5 mm up or down. GM TOPROLL BALANCE comes with a natural anodized finish (EV) resembling stainless steel as standard. We can supply at short notice in lengths of,900 mm and 2,900 mm. Naturally we can also supply made-to-measure products or special colors (RAL/Eloxal/NCS). Adaptable: naturally you can team your GM TOPROLL BALANCE sliding door system with a wide choice of floor guides and handle designs, just as you wish. Door guides GM PIN P with felt guide Local guide 20/22/20 with plastic inlay Local guide 20/26/20 with plastic inlay Saves time: The double-shell guide rail principle makes installation and adjustment remarkably easy mm (depending on glass thickness) Door handles Recessed handle circular Ø 55 mm Recessed handle rectangular 40 x 00 mm G-handle for pocket mounting Ø36 Ø mm (depending on glass thickness)

8 GM3_3_2._PR_EN_2.202 WELCOME TO GLAS MARTE For extra-slim solutions, we recommend the GM TOPROLL SMART system, with an installation height of as little as 40 mm. Special glazing situations call for special system solutions. Glas Marte offers many other high-quality glazing solutions in addition to the sliding door systems shown here. Talk to us; we will be only too happy to advise. Further information can be found on our website: Follow us: Subject to technical modifications without notice Glas Marte GmbH A 6900 Bregenz Brachsenweg 39 Tel Fax -57 technik.in.glas@glasmarte.at