LIST OF CONTRACTORS YET REGISTERED AT MECATRONIC CONNECTION 2013
|
|
- Laurel Heath
- 7 years ago
- Views:
Transcription
1 LIST OF CONTRACTORS YET REGISTERED AT MECATRONIC CONNECTION G & PARTNERS Position(s) of participant(s): Technical and Sourcing Director ALDEBARAN ROBOTICS AIRCELLE GROUPE SAFRAN Position(s) of participant(s): Mechanics Systems Manager ALSTOM Position(s) of participant(s): Sensors Project Manager ALSTOM GRID Position(s) of participant(s): Technical Dpt BIORAD Position(s) of participant(s): Compliance Instruments Analyst CAILLAU Position(s) of participant(s): Mechatronics Project Manager CEA Position(s) of participant(s): Program Manager CCE Position(s) of participant(s): Purchasing Manager DELPHI MECHATRONICS SYSTEMS DEP INDUSTRIE
2 DURA AUTOMOTIVE Position(s) of participant(s): Innovation Engineer ELECTRICFIL AUTOMOTIVE Position(s) of participant(s): R&D Mechatronics Manager Position(s) of participant(s): Innovation Project Manager Position(s) of participant(s): Mechatronics R&D Manager Position(s) of participant(s): Mechatronics Product line Director Position(s) of participant(s): Marketing Line Product HELIOSLITE Position(s) of participant(s): Technical Manager HUTCHINSON Position(s) of participant(s): Mechanics R&D Manager INERGY AUTOMOTIVE SYSTEMS Position(s) of participant(s): Program Manager INGEROP Position(s) of participant(s): Systems and Equipment Manager LORD CORPORATION Position(s) of participant(s): Director, Global Strategy Development, Aerospace & Defense LUSTUCRU PANZANI Position(s) of participant(s): Industrial Project Manager NTN SNR PLASTIC OMNIUM AUTO EXTERIEUR SERVICES Position(s) of participant(s): Research Project Manager
3 PSA PEUGEOT CITROEN Position(s) of participant(s): R&D Mechatronics Manager RENAULT SAGEM DS SCHNEIDER ELECTRIC Position(s) of participant(s): Technical Department SCHNEIDER ELECTRIC Position(s) of participant(s): Global Supply Chain SNCF INFRA Position(s) of participant(s): Key Projects Manager Operation manager SKF AEROSPACE SOMFY Position(s) of participant(s): Industrial Partnerships Manager SPIT Position(s) of participant(s): Purchasing Dpt SPX CLYDE UNION PUMPS Position(s) of participant(s): Technical Manager TRIXELL Position(s) of participant(s): Mechatronics Dpt Manager VALEO POWERTRAIN SYSTEMS VALEO DAV Position(s) of participant(s): Innovation Project Engineer
4 List of the projects Mecatronic 2013 Project 1:Automotive and aeronautic suppliers, specialized in stainless steel clamps and tooling, is looking for partners for its clamps needing some specific portable toolings which must control if the tightening is made properly with any types of clamps or diameters and directly and the assembly lines. As these tools need to be portable we need to have a high integration level that the mechatronic can do. Complementary research of skills in the fields of informatics (data acquisition, Human/Machine Interface, R&D, studies, engineering, mechatronic systems, wireless communication technology), electronics and electrics (actuators, sensors, boards, system design (CAD/CAM, ), control, measurement, instrumentation, command electronics, Human/Machine Interface, motors, servo motors, prototyping, R&D, studies, engineering, mechatronic systems, electrical transmission), mechanics (actuators, sensors, control, measurement, instrumentation, sensors, Human/Machine Interface, prototyping, R&D, studies, engineering, mechatronic systems), plastic processing (injection, micro-injection, prototyping, R&D, studies, engineering, moulding/overmoulding), and automation (actuators, sensors, R&D, studies, engineering, Human/Machine Interface, prototyping, mechatronic systems). Project 2: Industrial company, specialized in assembly and integration of metallic solutions for the fields of building, energy, and equipment goods, is looking for partners for the production specialized electronic materials able to realize micro-sensors that can be inserted in its products and communicate. Complementary research expressed in the field of mechanics: mechanical, pneumatic and hydraulic transmissions and components, prototyping, R&D, studies, engineering and electromechanical systems. Project 3: Tier 1 automotive equipment manufacturer (driver control systems, seating control systems, safety hardware, structural body systems, exterior trim and integrated glass systems), is looking for partners able to supply connectors, CD and BLDC motors and lead frames connectors. Complementary research of skills in the fields of informatics (calculators, R&D, studies, engineering, mechatronic systems), electronics/electrics (actuators, Electronic Control Units (E.C.U.), human/machine interface, prototyping, mechatronic systems), mechanics (actuators, sensors mechanical components and transmissions, design, prototyping, R&D, studies, engineering, mechatronic systems), plastic processing (assembly, metal cutting, design, extrusion, injection/micro-injection, laser, prototyping, R&D, studies, engineering, moulding/overmoulding) and automation (actuators, R&D, studies, engineering). Project 4: Food industry group, specialized in the production of various ready-cooked dishes (particularly pasta and sauces), is looking for partners for the implementation of production lines at the occasion of a new plant for launching a new concept of readycooked dish. Research are oriented on the following fields: Informatics: data acquisition, testing and diagnostics, human/machine interface, software, modeling, simulation, calculation, R&D, studies, engineering, mechatronic systems, numerical transmission, schedulers, wireless communication technology,
5 Electronics / Electrics : actuators, sensors, electrical wiring, electronic wiring, boards, system design (CAD/CAM, ), control, measurement, instrumentation, connector technology, testing and diagnostics, power electronics, command electronics, human/machine interface, microelectronics, micro / nanotechnology, motors, servomotors, processors, prototyping, embedded systems, electromechanical systems, mechatronic system, electrical transmission, data treatment, Mechanics: actuators, system design (CAD/CAM, ), control, measurement, instrumentation, human/machine interface, sensors, micromechanics, micro / nanotechnology, modeling, simulation, calculation, prototyping, bearings, electromechanical systems, mechatronic systems, machining mechanical, pneumatic and hydraulic transmissions and components, Plastic processing: extrusion, injection/micro-injection, laser, moulding/overmoulding, forming/thermoforming/hydroforming, machining, Automation: actuators, sensors, testing and diagnostics, industrial automation systems and equipment, human/machine interface, micro/nanotechnology, R&D, studies, engineering, robotization, command systems, mechatronic systems, Project 5: Industrial group, specialized in the design and production of automotive seats: mechanisms, structure, actuators, comfort systems,, is looking for skills on the field of mechanics : actuators, system design (CAD/CAM, ), mechanical components and transmissions, human/machine interface, materials, electromechanical systems, mechatronic systems, Project 6: Industrial group, among the global leader in the world of power generation, power transmission and rail infrastructure, is looking for partners for simulation of UHF signals in GIS, Sensitivity improvement of antennas and DP localization. Project 7: Consulting company for In-Vitro-Diagnostic company systems, specialized in consumable Innovation, technology scouting and technical due-diligences, is looking for components and services for In vitro diagnostic instrument development. The field of research is mainly oriented on the following skills: informatics (design, human/machine interface, micro/nanotechnology, R&D, studies, engineering, mechatronics systems), electronics/electrics (actuators, sensors, design), mechanics (actuators, sensors, design, human/machine interface, micromechanics, micro/nanotechnology, materials, prototyping, R&D, studies, engineering), plastic processing (injection micro-injection, prototyping, micro-nanotechnology) and automation (actuators, sensors, human machine interface, micro/nanotechnology, prototyping, R&D, studies, engineering, robotization). Project 8: Worldwide group of engineering and services for automotive industry, specialized in design and assembly of 4 majors domains of vehicles: seat, interior systems, exterior systems and emission control technologies, is looking for skills in electromechanical field (actuators, sensors, electro-mechanical and mechatronics systems, components and mechanical transmission, materials, plastic injection & overmolding, micro-nanotechnologies), for new project developments. Project 9: Tier 1 equipment manufacturer, specialized in the fields of dynamic systems, active control, smart dampers, tactile feedback devices, sensors, is looking for partners with skills in the fields of informatics (mechatronic systems, wireless communication technology, electrics and electronics (actuators, sensors, command electronics, motors, servomotors, electromechanical systems, mechatronic systems), mechanics (actuators, sensors, mechanics components and transmissions) and automation (actuators, sensors, control/command systems). Project 10: Body panel supplier for automotive industry is looking for parteners with skills
6 in the field of electronics/electrics: actuators, Electronic Control Units (ECU), embedded systems and mechatronic systems. Project 11: Industrial group specialized in project and Program management, asset management and maintenance of the French railway network, is looking for partners able to offer skills in the fields of informatics (design, testing and diagnostics, human/machine interface, R&D, studies, engineering, real time network, wireless communication technology, telecommunications, numerical transmission,), electrics and electronics (design, testing and diagnostics, command electronics, human machine interface, modeling, simulation, calculation, R&D, studies, engineering, embedded systems, electromechanical systems, mechatronic systems, electrical transmission, data treatment), mechanics (system design (CAD/CAM, ), control, measurement, instrumentation sensors, mechanical components and transmission, hydraulic components and transmissions, design, modeling, simulation, calculation, R&D, studies, engineering, electromechanical systems, mechatronic systems) and automation (industrial automation systems and equipment, R&D, studies, engineering, control/command systems, mechatronic systems). Project 12: Tier 1 equipment manufacturer specialized in the manufacturing of sensors, actuators and mechatronic modules for automotive industry, is looking for companies able to supply small engines and their piloting system (brushless, )? The company is also looking for skills in electronics/electrics (actuators, sensors, design, command electronics, modeling, simulation, calculation, motors, servo-motors, electromechanical systems, mechatronic systems), in automation (actuators, sensors, control/command systems, mechatronic systems) and in mechanics (actuators, sensors, mechanical transmissions and components, design, modeling, simulation, calculation). Project 13: Tier 1 Automotive equipment manufacturer specialized in the manufacturing of automotive seats, is looking for skills in the fields of informatics (human/machine interface, modeling, simulation, calculation, programmers and wireless communication technology) and of electronics/electrics (actuators, sensors, electrical wiring, electronic wiring, boards, electronic components, testing and diagnostics, command electronics, modeling, simulation, calculation, embedded systems and electromechanical systems). Project 14: Industrial group specialized in the production and supply of solutions and equipment for electrical distribution and management of energy, is looking for skills in the field of mechatronics and energy (battery, BMS, fuel cell, heat exchanger, energy harvesting, thermoelectricity, ) Project 15: Manufacturer specialized in the design, development, manufacturing and sale of instruments and systems for precision dimensional measurements, is looking for partners in the fields of new systems of measurement (precision dimensional measurement : without contacts, ) and new precision position sensors. Complementary needs in the fields of informatics (human/machine interface, wireless communication technology), electronics (microelectronics, micro-nanotechnology, electromechanical systems), precision mechanics and automation (micro-nanotechnology). Project 16: Automotive manufacturer specialized in the development of units (top column module, push in steering wheel, steering column lock), is looking for suppliers dealing with new technologies of electric commutation type MID (Molded Interconnected Device), in production or in development, to share technico-economical perspectives. The manufacturer is also looking for suppliers with other technologies of the commutation with low current, in the automotive or similar fields. Project 17: Research institute specialist of smart an complex systems, is looking for partners for the production of motors and actuators, acquisition boards and command control, structure components. Researches are mainly focused in the fields of
7 electronics/electrics (actuators, sensors, electrical wiring, boards, motors, servo motors, electromechanical systems, mechatronic systems), mechanics (actuators, sensors, mechatronic systems) and automation (actuators, sensors, control/command systems, mechatronic systems). Project 18: Company specialized in the design and production of high concentration photovoltaic (CPV) trackers is looking for industrial subcontractors and suppliers of parts (electromechanical actuators, foundry parts, bearings, ), for the production of its trackers. Project 19: Company specialized in the field of nuclear, gas and coal-fired plants and in alternative energy applications, helping to optimize plant performance and reduce emissions, is looking for innovative solutions in the field of mechatronics technology, likely to support our future projects. Project 20: Large group, world leader in solutions and services related to optronics, avionics, electronics and software, is looking for partners with skills in the fields of inforatics (data acquisition, testing and diagnostics, software) and of electronics/electrics (sensors, boards, control, measurement instrumentation, Electronic Control Units (E.C.U.)). Project 21: Company specialized in the field of production of electronic devices (cards + integration + test) for Automotive, Domotics and Industrial Equipment, is looking for subcontractors in the fields of electronics (electronic components, connectics, design, test), mechanics (conception of systems, engineering), plastics (cutting of parts, design and engineering). Specific needs in electronic engineering, mechanical engineering or plastics, test development and automatism (machine human interface).
Development/ 3D Modelling Calculations and Sizing Design Eco-design Expert knowledge Software Virtual prototyping Simulation.
BUSINESS FIELDS REPRESENTED: Studies and development Equipment supply Raw materials Additive manufacturing Rapid prototyping Design and manufacture of rapid tooling and / or prototype molds Laboratory
More informationfrom mind to motion Automotive Your partner for mechatronics
from mind to motion Automotive Your partner for mechatronics From mind to motion Your partner for mechatronics Sonceboz s core competencies consist of design, development and production of mechatronic
More informationPartnering In Growth Strategy
Partnering In Growth Strategy India On New Growth Cycle! India's economy is now beginning to recover and is expected to grow in the coming years. With new government coming in control with favorable policies
More informationELECTRICAL & POWER DISTRIBUTION
ELECTRICAL & POWER DISTRIBUTION END-TO-END ELECTRICAL WIRING INTERCONNECTION SYSTEMS (EWIS) Complete EWIS System Design Harness Installation Design Reconciliation of Wiring Diagrams (2D) & Harness Design
More informationOUTCOME 1 TUTORIAL 1 - MECHATRONIC SYSTEMS AND PRODUCTS
Unit 57: Mechatronic System Unit code: F/601/1416 QCF level: 4 Credit value: 15 OUTCOME 1 TUTORIAL 1 - MECHATRONIC SYSTEMS AND PRODUCTS 1. Understand the applications of a range of mechatronic systems
More informationPoznan University of Technology Faculty of Electrical Engineering
Poznan University of Technology Faculty of Electrical Engineering Contact Person: Pawel Kolwicz Vice-Dean Faculty of Electrical Engineering pawel.kolwicz@put.poznan.pl List of Modules Academic Year: 2015/16
More informationTesting for the Unexpected: An Automated Method of Injecting Faults for Engine Management Development
Testing for the Unexpected: An Automated Method of Injecting Faults for Engine Management Development By Shaun Fuller What will happen if a fault occurs in an automotive vehicle s electrical system? Similarly,
More informationIEEE Projects in Embedded Sys VLSI DSP DIP Inst MATLAB Electrical Android
About Us : We at Ensemble specialize in electronic design and manufacturing services for various industrial segments. We also offer student project guidance and training for final year projects in departments
More informationSignature and ISX CM870 Electronics
Signature and ISX CM870 Electronics Cummins West Training Center System Description General Information The Signature and ISX CM870 engine control system is an electronically operated fuel control system
More informationIntroduction. Focusing on marketing & sales of standard process equipment as standard systems as well
Introduction C-Tech is a global acting company with an experienced team of experts, having its management headquarters in the Netherlands and financial holding in Hungary Focusing on marketing & sales
More informationELECTRICAL AND COMPUTER ENGINEERING By Joan Omoruyi, Engineering Librarian, Northeastern University
ELECTRICAL AND COMPUTER ENGINEERING By Joan Omoruyi, Engineering Librarian, Northeastern University. Soon after physicists began to understand electricity, the electrical engineering profession was born
More informationGUJARAT TECHNOLOGICAL UNIVERSITY
Subject Code Subject Name Date Time Branch 01: Aeronautical Engineering 160101 Aerodynamics-II 24-05-2013 10:30 To 01:00 160102 Fundamentals of Jet Propulsion 27-05-2013 10:30 To 01:00 160103 Vibration
More information2014 Voluntary Page and Overlength Article Charges
2014 and NOTE: page charges do not apply to open access articles. Title Aerospace & Electronic $200 10 4 Aerospace & Electronic Affective Computing Annals of the History of Computing Antennas & Propagation
More informationLecture 3 - Model-based Control Engineering
Lecture 3 - Model-based Control Engineering Control application and a platform Systems platform: hardware, systems software. Development steps Model-based design Control solution deployment and support
More informationwww.imprezer.tk Introduction to www.union88.tk RACE FUELS Hans-Christian von der Wense Munich, Germany
Introduction to Hans-Christian von der Wense Munich, Germany Overview Progress in Automotive Electronics and it s Impacts on Networking LIN Consortium LIN Concept Physical Layer Data Link Layer LIN Network
More informationWORLDWIDE AUSTRIAN CABLE SYSTEMS
WORLDWIDE AUSTRIAN POWER WWW.EGSTON.COM WORLDWIDE AUSTRIAN CABLE SYSTEMS ENGLISH WORLDWIDE AUSTRIAN POWER ONLY THE BEST EXPERIENCES EGSTON CABLE SYSTEMS YOU HAVE AN IDEA, WE WRAP IT AND FILL IT, SO THAT
More informationAll round in Motion Control Rotating, linear and combinations of both! know-how makes the difference
All round in Motion Control Rotating, linear and combinations of both! know-how makes the difference How state-of-the-art are your drive solutions? As a manufacturer you face complex challenges. The world
More informationTypes of Engineering Jobs
What Do Engineers Do? Engineers apply the theories and principles of science and mathematics to the economical solution of practical technical problems. I.e. To solve problems Often their work is the link
More informationMechatronics Engineering
Mechatronics Engineering Mechatronics is a synergistic combination of precision engineering, electronic control and mechanic systems. It is the science that exists at the interface among the other five
More informationModel-based Testing of Automotive Systems
Model-based Testing of Automotive Systems Eckard Bringmann and Andreas Krämer ICST 08 Presented by Julia Rubin on November 21, 2012 Multidisciplinary Business 2 Supply Chain of Components 3 Innovation
More informationPhilippine Motorcycle Industry
Philippine Motorcycle Industry Providing Filipinos Mobility Using Environment-friendly Technology by Rene M. Gener President, MDPPA 22 June 2010, DENR, Quezon City Contents The Motorcycle Industry Value
More informationSTAMPING MOULDING OVERMOULDING ASSEMBLY MECHATRONIC MACHINES
STAMPING MOULDING OVERMOULDING ASSEMBLY MECHATRONIC MACHINES t >>>>>>> interconnect integration Stamped Assembled Loose overmoulded Continuous overmoulded Loupot >>> STAMPING Loupot >>>>>>>>>>>>> Your
More informationThe Development of Space Solar Power System Technologies
17 The Development of Space Solar Power System Technologies TAKANORI NARITA *1 TOSHIHIRO KAMIYA *1 KEIJI SUZUKI *1 KENICHI ANMA *2 MAYUKI NIITSU *3 NOBUHIKO FUKUDA *4 Mitsubishi Heavy Industries (MHI)
More informationMECE 102 Mechatronics Engineering Orientation
MECE 102 Mechatronics Engineering Orientation Mechatronic System Components Associate Prof. Dr. of Mechatronics Engineering Çankaya University Compulsory Course in Mechatronics Engineering Credits (2/0/2)
More informationIntegrated electronics for enhanced performance, energy efficiency and reduced emissions
Integrated electronics for enhanced performance, energy efficiency and reduced emissions A SHARED DRIVE Hyperdrive Innovation develops powertrain systems for electric, hybrid and conventionally powered
More informationList of courses covered under each stream
List of courses covered under each stream Chemical Engineering & Allied S. No. COURSE 1 ADVANCED MATERIALS TECHNOLOGY 2 BIOCHEMICAL ENGINEERING 3 BIOCHEMICAL ENGINEERING AND BIOTECHNOLOGY 4 BIOMEDICAL
More informationCAD Training Center Sooxma Technologies Ameerpet, Hyderabad. Ph: 9490219339, 040-23731030
CAD Training Center Sooxma Technologies Ameerpet, Hyderabad. Ph: 9490219339, 040- MECHANICAL FINAL YEAR PROJECTS LIST PRODUCTION BASED CTC-1. Empirical modeling of tool wear and material removal rate using
More informationPROVIDING TECHNICAL SOLUTIONS FOR BIOLOGICAL PROCESSES AND MEDICAL DEVICES
PROVIDING TECHNICAL SOLUTIONS FOR BIOLOGICAL PROCESSES AND MEDICAL DEVICES ABOUT LIFE SCIENCES ENGINEERING The joint Life Sciences Engineering business unit of Fraunhofer IPT and CMI has offices in Boston,
More informationIn-Vehicle Networking
In-Vehicle Networking SAE Network classification Class A networks Low Speed (
More informationThe Assembly Automation Industry
System Solutions For The Assembly Automation Industry Your Resource For Motion Control Components, Systems and Solutions Assembly Automation Industry: A Focus Parker means components, systems and partnerships
More informationITT Control Technologies Industrial Products
ITT Control Technologies Industrial Products Application Solutions ITT Control Technologies product lines are continually expanding to provide its customers with solutions for applications in two market
More informationHARTING Smart Network Infrastructure. Intelligent Network Solutions
HARTING Smart Network Infrastructure Intelligent Network Solutions HARTING worldwide Transforming customer wishes into concrete solutions 2 The HARTING Technology Group is skilled in the fields of electrical,
More informationHow To Understand The Future Of Smart Technology
Vision What is a smart community? 4 Vision The governance dimension in smart solutions 4 Vision Socio-economic trends and the EU large programs 8 Vision Socio-economic trends and the South American context
More informationPEUGEOT e-hdi STOP/START TECHNOLOGY MEDIA KIT
PEUGEOT e-hdi STOP/START TECHNOLOGY MEDIA KIT PEUGEOT e-hdi TECHNOLOGY INTRODUCTION In designing the new generation of Euro 5 HDi engines - a project in which Peugeot has invested more than 1billion the
More informationCONTINUOUSLY VARIABLE TRANSMISSION (CVT)
GROUP 23 CONTINUOUSLY VARIABLE TRANSMISSION (CVT) CONTENTS CVT........................... 23-2 GENERAL INFORMATION............. 23-2 ELECTRONIC CONTROL SYSTEM...... 23-3 EEPROM...........................
More informationPROGRAM CRITERIA FOR ELECTRICAL ENGINEERING TECHNOLOGY
PROGRAM CRITERIA FOR ELECTRICAL ENGINEERING TECHNOLOGY Scope These program criteria apply to programs having titles involving Electrical Engineering Technology including: electrical engineering, electrical
More informationVolkswagen Argentina. Leonardo Ezcurra. Executive Manager New Projects Supply Office. October 2012
Volkswagen Argentina Leonardo Ezcurra Executive Manager New Projects Supply Office October 2012 Contents 1. Presentation 1.1 Volkswagen Group 1.2 Volkswagen Argentina 2. Local Products Integration Grade
More informationJoining techniques for lightweight constructions in heavy vehicles
Joining techniques for lightweight constructions in heavy vehicles Flanders DRIVE Index: Flanders DRIVE 1 Joining techniques for lightweight constructions 2 Project partners 3 5 lightweight challenges
More informationwith Electronic Assistant
TECHNICAL DATASHEET #TDAX100200 BLDC Motor Drive Drives a 12V, 24V or 48V BLDC motor Bidirectional, up to 25A Smooth speed control using Hall Sensors CAN (SAE J1939) with Electronic Assistant Features:
More informationLOCAL INTERCONNECT NETWORK (LIN)
54B-1 GROUP 54B LOCAL INTERCONNECT NETWORK (LIN) CONTENTS GENERAL INFORMATION........ 54B-2............ 54B-3 STRUCTURE................... 54B-2 54B-2 LIN refers to "Local Interconnect Network," which
More informationHardware in the Loop (HIL) Testing VU 2.0, 182.117, WS 2008/09
Testen von Embedded Systems Hardware in the Loop (HIL) Testing VU 2.0, 182.117, WS 2008/09 Raimund dkirner Testing Embedded Software Testing the whole system including the physical environment is not possible
More informationwww.vdo.com Road speed limitation for commercial vehicles
www.vdo.com Road speed limitation for commercial vehicles Mobility shapes our life moving ahead is our passion A passion for mobility drives us to achieve new goals, to push further and to move boundaries.
More informationHARTING Smart Network Infrastructure. Intelligent Network Solutions
HARTING Smart Network Infrastructure Intelligent Network Solutions HARTING Worldwide Transforming customer wishes into concrete solutions The HARTING Technology Group is skilled in the fields of electrical,
More informationAnalog Amplifier Rexroth RA: Easy, user-friendly control of pumps and valves
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Analog Amplifier Rexroth RA: Easy, user-friendly control of pumps and valves The Drive & Control Company
More informationCOMPANY OVERVIEW. International Sourcing Tooling Management Design & Product Engineering Rapid Prototyping Supply Chain Management
COMPANY OVERVIEW COMPANY OVERVIEW SINO INTERNATIONAL PRODUCTS import, manufacture, assemble and supply components to the automotive, rail and other industrial sectors Warwick Office United Kingdom Shanghai
More informationNew Market & Fresh Contacts
New Market & Fresh Contacts Increase Your Visibility in a High Growth Region Including: October 15 16, 2013 Reliant Center Houston, TX Featuring: AeroConShows.com DM-Texas.com Including: October 15 16,
More informationDOMOTICS PRACTICAL IMPLEMENTATION AND GENERAL CONCEPTS
Dan LICA ASE Economic Informatics doctoral program DOMOTICS PRACTICAL IMPLEMENTATION AND GENERAL CONCEPTS Essay Keywords Domotics home automatisation e-society robotics home security Abstract This article
More informationComprehensive Range of Industrial Products and Solutions
Comprehensive Range of Industrial Products and Solutions SAFETY AUTOMATION Micro Controllers Small Controllers Mid Range Controllers Large Automation Controllers Safety Programmable Controller Motion Controller
More informationUNIT 1 INTRODUCTION TO NC MACHINE TOOLS
UNIT 1 INTRODUCTION TO NC MACHINE TOOLS Structure 1.1 Introduction Objectives 1.2 NC Machines 1.2.1 Types of NC Machine 1.2.2 Controlled Axes 1.2.3 Basic Components of NC Machines 1.2.4 Problems with Conventional
More informationnet COMPETENCE MATRIX
net www.vocationalqualification.net COMPETENCE MATRIX 2 www.vocationalqualification.net What is a Competence Matrix? Competence Matrix is a table which displays work-related competence descriptions and
More informationWhat do you want to do?
What do you want to do? and where do you want to go? No matter how far you want your future career to take you, an employer with a broad range of operations in a load of countries will always be the ticket.
More informationBuilding Services. 240 ECTS cr (4 years) Option HVAC Engineering
Building Services BACHELOR OF ENGINEERING, B.SC. (ENG.) 240 ECTS cr (4 years) Option HVAC Engineering Persons studying for an engineer degree in the Option of HVAC Engineering can specialise in HVAC planning,
More informationUNDERGRADUATE DEGREE PROGRAMME IN INDUSTRIAL ELECTRONICS AND AUTOMATION ENGINEERING SCHOOL OF INDUSTRIAL ENGINEERING. ALBACETE
UNDERGRADUATE DEGREE PROGRAMME IN INDUSTRIAL ELECTRONICS AND AUTOMATION ENGINEERING SCHOOL OF INDUSTRIAL ENGINEERING. ALBACETE HIGHER TECHNICAL SCHOOL OF INDUSTRIAL ENGINEERING. CIUDAD REAL SCHOOL OF TECHNICAL
More informationService Oriented Architecture for Agricultural Vehicles
Service Oriented Architecture for Agricultural Vehicles Leipzig, 30.9.2010 8. Workshop Automotive Software Engineering Dr. G. Kormann, M. Hoeh, H.J. Nissen THE END of Embedded Software? www.electronics-ktn.com/
More informationSAINSBURY S GREEN LOAN FRAMEWORK
Under embargo until 00.01 BST on Sunday 20 July 2014 SAINSBURY S GREEN LOAN FRAMEWORK July 2014 Highlights: Innovative Green Loan aligned with the Green Bond Principles Strong alignment of Sainsbury s
More information1. NON CONTACT DIGITAL TACHOMETER USING AVR MICROCONTROLLER 2. CELSIUS SCALE THERMOMETER USING Atmega 8 -- 3. BLACK BOX SECURITY SYSTEM FOR CAR USING
1. NON CONTACT DIGITAL TACHOMETER USING AVR MICROCONTROLLER 2. CELSIUS SCALE THERMOMETER USING Atmega 8 -- 3. BLACK BOX SECURITY SYSTEM FOR CAR USING SENSORS 4. ULTRASONIC DISTANCE METER 5. 5 CHANNEL IR
More informationIntroduction to Electronic Signals
Introduction to Electronic Signals Oscilloscope An oscilloscope displays voltage changes over time. Use an oscilloscope to view analog and digital signals when required during circuit diagnosis. Fig. 6-01
More informationELECTRICAL ENGINEERING DEGREE. List of subjects available for 2014/2015 SCHOOL OF ENGINEERING / ESCUELA DE INGENIERÍA INDUSTRIAL UNIVERSITY OF VIGO
ELECTRICAL ENGINEERING DEGREE List of subjects available for 2014/2015 SCHOOL OF ENGINEERING / ESCUELA DE INGENIERÍA INDUSTRIAL UNIVERSITY OF VIGO 1 Degree: Site: (V12G320V01) Bachelor's Degree in Electrical
More informationCredit exemptions for diplomas granted in Singapore in engineering, science and technology
s for diplomas Informatics College complete degree Cyber Security Bachelor of (Electrical and Mechatronic) (Electrical and Electronic) (Electrical and Systems ) ( and Communications) (Computer Systems)
More informationReal Time Simulation for Off-Road Vehicle Analysis. Dr. Pasi Korkealaakso Mevea Ltd., May 2015
Real Time Simulation for Off-Road Vehicle Analysis Dr. Pasi Korkealaakso Mevea Ltd., May 2015 Contents Introduction Virtual machine model Machine interaction with environment and realistic environment
More informationANSYS SCADE Model-Based Development Solutions for AUTOMOTIVE. Critical Systems & Software Development Solutions
ANSYS SCADE Model-Based Development Solutions for AUTOMOTIVE Critical Systems & Software Development Solutions Embedded Systems and Software Challenges in Automotive Production-Proven International and
More informationLearning Systems Software Simulation
Learning Systems Software Simulation EasyVeep PLC controls and technology training FluidSIM Fluid Power training aid for instructors and design tool for engineers COSIMIR PLC 3D simulation tool for practical
More informationa pocket guide to: what engineers do engineering.asu.edu
a pocket guide to: what engineers do Engineers are innovators that discover and design ways to make people s lives easier, safer and better. Engineers create technology, infrastructure, processes and materials
More informationAutomatic Fire Fighting Monitors
Automatic Fire Fighting Monitors Fire Protection Solutions Automatic Fire Fighting Monitors Foreword Automatic monitors are devices used to deliver large amounts of water or water/foam solution to remote
More informationIntegrated Custom Systems
Integrated Custom Systems Compact panels Standard Manifolds & Assemblies Electronic pressure control Custom manifolds & Assemblies Automated test benches S t r e a m l i n e y o u r p r o c e s s Complete
More informationCourse code Course name ECTS Autumn Spring. ELEC-E8101 Digital and Optimal Control 5 X. ELEC-E8102 Distributed and Intelligent Automation Systems 5 X
COURSES LECTURED IN ENGLISH 2015-2016, AALTO UNIVERSITY SCHOOL OF ELECTRICAL ENGINEERING This list is subject to change. Please check the WebOodi portal in August for up-to-date information. Course code
More informationCaterpillar Automatic Code Generation
SAE TECHNICAL PAPER SERIES 2004-01-0894 Caterpillar Automatic Code Generation Jeffrey M. Thate and Larry E. Kendrick Caterpillar, Inc. Siva Nadarajah The MathWorks, Inc. Reprinted From: Electronic Engine
More informationBachelor of Technology
Bachelor of Technology Combined Degree & Diploma THEORY PRACTICE EXPERIENCE 4.5 Year Degree The Bachelor of Technology Degree is a fresh approach to education for the dynamic world of engineering. Choose
More informationELECTRICAL WIRING (R.H. DRIVE VEHICLES)
C-1 ELECTRICAL WIRING (R.H. DRIVE VEHICLES) CONTENTS GENERAL.......................... 3 WIRING HARNESS CONFIGURATION DIAGRAMS......................... 4 ENGINE COMPARTMENT................ 4 DASH PANEL...........................
More informationWynn s Extended Care
Wynn s Extended Care Every car deserves to receive the very best care... especially yours. How Do You Keep Your Reliable Transportation Reliable? Count on Wynn s Because Wynn s has been caring for cars
More informationthe headoffices Hardware standard Software standard hardware custom motion controllers Multi-panel meters custom custom hardware hardware
the headoffices Company & mission Mission Apply IT and electronics to the control of motion, process and operating logic in plant and machinery. Concentrate on listening to customers and perceiving their
More informationGIORGI-FERMI vocational school. Knowledge and skills to be acquired by the student/trainee during his training
GIORGI-FERMI vocational school Knowledge and skills to be acquired by the student/trainee during his training Electrical course Electrical circuits and networks Programmable Logic Controller PLC (Siemens)
More information2010 APPLICATION REFERENCE GUIDE
2010 APPLICATION REFERENCE GUIDE INDEX QUALITY POLICY 2 ERGO ASSIST STANDARD 4-13 CUSTOM 14-18 END EFFECTORS 19-24 LIFT ASSIST 25-41 FIXTURED TOOLS 42-53 FIXTURES 54-63 ASSEMBLY TABLES 64-72 CARTS/ DUNNAGE
More informationEurotraining survey on Microsytems training requirements
Eurotraining survey on Microsytems training requirements Hervé Fanet CEA LETI Annette Locher FSRM Chantal Tardif CEA INSTN Abstract One objective of the Eurotraining MST project is to identify training
More information1993 WIRING DIAGRAMS Volkswagen Wiring Diagrams. Volkswagen; EuroVan
Article Text ARTICLE BEGINNING 1993 WIRING DIAGRAMS Volkswagen Wiring Diagrams Volkswagen; EuroVan COMPONENT LOCATION MENU COMPONENT LOCATIONS TABLE ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
More informationCOMMISSION DIRECTIVE 2013/28/EU
L 135/14 Official Journal of the European Union 22.5.2013 COMMISSION DIRECTIVE 2013/28/EU of 17 May 2013 amending Annex II to Directive 2000/53/EC of the European Parliament and of the Council on end-of-life
More informationAutomotive electronics CAN and LIN buses. Copyright 2006 Matrix Multimedia Limited
Automotive electronics CAN and LIN buses Copyright 2006 atrix ultimedia Limited About this presentation This presentation was developed by John Dobson anaging Director of atrix ultimedia Limited. PowerPoint
More informationCity of Tampa Employment Services Division FLEET MECHANIC APPLICATION SUPPLEMENT
City of Tampa Employment Services Division FLEET MECHANIC APPLICATION SUPPLEMENT Check the job(s) for which you are applying: Fleet Mechanic I Fleet Mechanic II Fleet Mechanic III NAME Date: Please read
More informationENGINE CONTROLS AND FUEL SYSTEMS
ENGINE CONTROLS AND FUEL SYSTEMS SPRING 2005 FORD VEHICLE COMPUTER RELEARN PROCEDURES Performing repairs or service on any of the following may require you to initiate a computer relearn procedure in order
More informationFEV Parallel Mode Strategy
FEV Parallel Mode Strategy Peter Janssen MSc. Dipl.-Ing Glenn Haverkort FEV Motorentechnik As the automotive industry has to react to the global concern about climate change related to CO2 emissions and
More informationFacts about ABB. A leading power and automation technology company with strong market positions in its core businesses
ABB ROBOTICS Facts about ABB Headquarters: Zurich, Switzerland About 105,000 employees in around 100 countries Orders in 2005: $23.6 billion Revenues in 2005: $22.4 billion Listed on Stockholm, Swiss &
More informationIndustrial Education
Industrial Management, Safety Industrial Education Program Description This program is designed to train men and women for management positions in government and industry. The program was developed in
More informationas Your partner in Business.
A Presentation The Company Swedmec is a service provider in marketing and sales for suppliers to the OEM industry. Through our network and with assignments from our principals all over the world we target
More informationWHITE PAPER. Enterprise Mobility Barometer Manufacturing Industry
WHITE PAPER Enterprise Mobility Barometer Manufacturing Industry Overview Enterprise mobility has emerged as a top strategic initiative among leading global organizations. To benchmark the current state
More informationEnergy Recovery System for Excavators Meng (Rachel) Wang, Chad Larish Eaton Corporation
Energy Recovery System for Excavators Meng (Rachel) Wang, Chad Larish Eaton Corporation Abstract Increasing fuel costs have become a significant portion of the operating expenses for owners and fleet managers
More informationInstrument panel. Volkswagen Touareg - Instrument panel. Special tools, testers and auxiliary items required. Release lever T10039
Volkswagen Touareg - Instrument panel Page 1 / 14 70-1 Instrument panel Tools Special tools, testers and auxiliary items required Release lever T10039 Instrument panel, removing and installing Removing
More informationSYSTEMS, CONTROL AND MECHATRONICS
2015 Master s programme SYSTEMS, CONTROL AND MECHATRONICS INTRODUCTION Technical, be they small consumer or medical devices or large production processes, increasingly employ electronics and computers
More informationConsulting, Engineering & Managed Service Provider
Consulting, Engineering & Managed Service Provider A Joint Venture Company Together Making a difference Introduction Genesis of AeroEuro: A Joint Venture between Punj Lloyd Group, India and GECI, France
More informationInnovation Takes Off
Innovation Takes Off Clean Sky 2 Information Day dedicated to the CFP04 ITD Systems Brussels, June 2016 Innovation Takes Off From Clean Sky towards Clean Sky 2 Systems ITD follows and expands Clean Sky
More informationBasic manual: Contents ELECTRONICALLY CONTROLLED HYDRAULIC SYSTEMS
TECHNICAL NOTE Edition Anglaise 77 11 205 445 JUNE 1999 Type 3239A Service 0422 Sub-section JE0 X BOSCH 5.3 ABS WITH SPEED INFORMATION FUNCTION Engine: Gearbox: XXX XXX Basic manual: N.T. 3034A This note
More informationMild Hybrids. Virtual
PAGE 20 CUSTOMERS The new 48-volt vehicle electrical system is opening up new possibilities for powerful, cost-efficient hybrid drives. This leads to new challenges for validating the installed power electronics.
More informationInjection Molding Machines Benefit from
Injection Molding Machines Benefit from Technology-Neutral Design Approach IN THIS ARTICLE A Moog survey indicates key trends and challenges face plastics processors Machine designers must meet new standards
More informationCASE STUDY. Automotive Components. Bosch Drancy, France Brake NVH Testing. Braking Systems. France. Automotive. PULSE, Transducers
CASE STUDY Bosch Drancy, France Brake NVH Testing France Automotive PULSE, Transducers The world-renowned Bosch group is a major producer of a vast range of automotive components. The company is an OEM
More informationAir conditioning, electrical testing
just a test. Air conditioning, electrical testing 01-253 Wire and component test using VAG1598 A test box Special tools and equipment VAG 1598 A test box and VAG 1598/11 adapter cable and VAG 1598/12 VAG1526
More informationCYBER PHYSICAL SYSTEMS@FRAUNHOFER IIS
F R A U N H O F E R I N S T I T U T E F O R I N T E G R AT E D C I R C U I T S I I S CYBER PHYSICAL SYSTEMS@FRAUNHOFER IIS CPS@FRAUNHOFER IIS Cyber physical systems: it is no longer possible to separate
More informationBlue Ocean Equities Technology Conference
Electronics Putting Internet into Things Blue Ocean Equities Technology Conference 18 March 2015 Sofitel Sydney Wentworth Dr David Warren Board Director Introduction Disclaimer This presentation has been
More informationIntegrated Engineering Solutions
Integrated Engineering Solutions Karthikeyan Natarajan & Prashant Kamat November 2014 1 Integrated Engineering Solutions: An Introduction AUTOMOTIVE Tie-up with 8 OEMs and 10 Tier-1 majors AEROSPACE &
More informationAutomotive Collision Repair
H. Councill Trenholm State Technical College 83 Location: Trenholm Campus Program Information The program is designed to educate and train persons to become qualified to repair damaged vehicles. Students
More informationComputer Integrated Manufacturing Course Description
Computer Integrated Manufacturing Course Description Computer Integrated Manufacturing (CIM) is the study of manufacturing planning, integration, and implementation of automation. The course explores manufacturing
More informationQualification of Auditor and Lead Auditor to perform an assessment according NSQ-100
Page 1 / 11 ABSTRACT Qualification of Auditor and Lead Auditor to CONTENTS 0. GENERAL... 2 0.1. Purpose... 2 0.2. Scope of application... 2 0.3. References... 2 0.4. Terminology... 2 1. SECTIONS... 2 1.1.
More information