1. INTRODUCTION Batching plant m3 / h. The structure is made of special steel. (The color of plant is orange)

Transcription

1 1. INTRODUCTION Batching plant m3 / h. The structure is made of special steel. (The color of plant is orange) The concrete batching plant BP-50, described below makes the production of wet or dry concrete with high quality and homogeneity. Materials which are inserted in high quality plant and all kinetic moves of machine are controlled over electro-hydraulic and electropneumatic units, and also controlled by electronic units made by world recognized manufacturers. Besides that, plant is made in several modules, which gives possibility of adapting of whole equipment according to every specific demand from buyer.

2 3 aggregate storages each of 10 m3 with possibility of increase in boards. Pneumatically opening valves of dosing aggregates. In continue, offer is made by basic needed technical entering parameters of batching plant: Turbine type concrete mixer Sicoma 1000 liters of output of fresh vibrated inserted concrete; Construction type: 3 Cones for hoppers 10 m3each; Coming construction for support; Height of overhang [exhaust] 4 m; Nominal production of capacity of 50 m3/h of fresh vibrated inserted transporting concrete in continuous work (based on 60 sec continous cycles); 3 types of aggregates; Weight dosing of cement, aggregates and liquid additives; Volumetric dosing of water; Control by manual and automatic [by computer] with 100 different programs [different concrete. BASIC TECHNICAL DATA OF PLANT Model BP-50 Production capacity of wet concrete based on 30 sec mixing time 50 m3/h Ambient oversea height Until m Ambient temperature for work -10 to 50 C Working temperature of machines inside of plant 5 to 35 C Maximum allowed wind 120 km/h Power supply V, 50 Hz [EC standard] MANUFACTURERS OF PARTS INSERTED IN PLANT Electronics [PLC] SIEMENS, LAUMAS Electrics and energetic SCHRACK Pneumatics Camozzi, Scales Laumas Reducers Varvel CONTROL CABIN 4 х 2.5 х 2.5 m. Wall thickness 60 mm. Computer Siemens S-7 (1000 concrete sorts). Electric installation of concrete batching plant includes all electrical connections of voltage, controlling and part for measuring of the plant. All installations and safety devices are made by EC regulations, protection IP 67, both way of work, manual or automatic. Owner of the plant has responsibility to install needed electrical power line until control panel unit in

3 cabin. Manufacturer will provide needed drawing for that purpose. Control panel unit in cabin has to be located in circle until 4 m from the supporting platform of mixer. Controlling of whole plant is by PLC Siemens S-7 controller which gives returning connections of the system which are part of safety demands. Controlling gives setting up the sequence of dosing of every each aggregate, cement, additives and water, needed for getting optimal work and production of concrete batching plant. TECHNICAL DATA OF TURBOMIXER Sicoma Volume size of mixer s drum 1500 l Output of fresh concrete 1000 l Output of fresh vibrated inserted concrete 1000 l Nominal production capacity of concrete 50 m3/h Internal diameter of mixer s drum 2200 mm Maximum weight of concrete 2400 kg

4 Engine power for mixer 37 kw Engine power for hydraulics 1.5 kw Number of circles of impellers around hand (for planetary mixers) 36 rpm Number of circles of hand (for planetary mixers) 17.5 rpm Output doors 1 pcs Covering of bottom thickness/quality 12 mm / Hardox 500 Covering of walls thickness/quality 12 mm / Fe 520 Maximum size of aggregate 60 mm Weight of mixer without skip 4700 kg Number of mixing hands 1 pcs Number of impellers on mixing hand 3 pcs TECHNICAL DATA FOR EQUIPMENT FOR DOSING OF WATER Way of dosing Volumetric Diameter of enter pipe 2 Diameter of output pipe 2 Measuring resolution 1 liter Capacity of dosing 350 l/min 2 additives pumps, capacity 25 kg each. Water tank350 liters. Tank of gathering of cement 500 kg. The determinant of moisture 2 vibrators on aggregate storages

5 TECHNICAL DATA FOR MIXER S SKIP DEVICE Volume size of SKIP 1500 l Maximum weight of aggregates kg Number of speeds at moving down 1 speed Number of speeds at moving up 1 speed Speed at moving down and moving up 15 m/min

6 Engine power for skip drive 7,5 kw Angle of skip s track 75 Weight of skip 1200 kg Mechanical and electromechanical safety devices Included Number of wires in cable / cable diameter 271 pcs / 12 mm Ripping of hardness for cable kg TECHNICAL DATA FOR SUPPORTING FRAME Height for construction / exhaust mm Stairways and protection fence Included The model of construction Approachable

7

8 View of summer plant on work area

9 Winter solution - on Client s request. Warranty 12 month. PRICE ЕURO EXW Options Cement silo 60 ton (incl. filter, stairway, etc.) Screw 12 meters, capacity 80 ton per hour EURO EURO. Installation 5000 EURO. Tickets, hotel and food are at the expense of Buyer.