COPPER TERMINALS COPPER TERMINALS. Kompress copper tube terminals (prefix CT) are manufactured from

Transcription

1 Kompress copper tube terminals (prefix CT) are manufactured from precision drawn tubes to BS 71, they are designed and manufactured to meet performance requirements of BS 79 Part 1 and are supplied in accordance with our ISO 9001 Accredited Certification BELL MOUTH CABLE ENTRY All standard types in the range between mm 00mm have bell mouths to ensure easy entry for even flexible conductors. COPPER SPLICES Kompress copper tube splices (prefix CS) are manufactured from the same materials and to the same standards as. FINISH Copper terminals and splices are supplied plated as standard to BS 17 Part for corrosion resistance and attractive appearance. However, if plain untinned pieces are required please consult the Kompress Sales Office. TEMPERATURE RATING The standard electro tinned parts are suitable for use up to temperatures of 1ºC. Should a higher temperature capability be required please consult the Kompress Sales Office. HOW TO SPECIFY The Kompress part numbering system has been carefully devised to help the specifier understand and recognise each element of the code. The simple part numbering system makes specifying easy without constant reference to the catalogue. This is how the part number is createdeg CT 1 = CT (Copper Terminal). 1 (Conductor size mm ). (Stud size mm).

2 COPPER TUBE TERMINALS AND SPLICES STUD mm LENGTH L WIDTH W INSIDE D HOLE dø RECOMMENDED TOOLING CT1.3 CT1. CT1. CS KT CT.3 CT. CT. CT. CS CT CT CT CS CT CT CT CT CT CTBL CS KT KT KT CT CT CT CT CT CTBL CS KT17 KT CT CT CT CT CT CTBL CS KT17 KT CT CT CT CT CT CTBL CS KFH3C KT 3 CONDUCTOR SIZE mm PACK SIZE PART NO.

3 PART NO. CONDUCTOR SIZE mm STUD mm LENGTH L WIDTH W INSIDE D HOLE dø PACK SIZE RECOMMENDED TOOLING CT CT CT CT CT CT CTBL CS KT CT CT CT CT CT CT CTBL CS COPPER TUBE TERMINALS AND SPLICES KT CT CT CT CT CT CT CT CTBL CS KT CT CT CT CT CT CT CTBL CS KT CT0 CT0 CT0 CT0 CT0 CT0 CT0BL CS CT1 CT1 CT1 CT1 CT1 CT1BL CS CT1 CT1 CT1 CT1 CT1 CT1BL CS

4 COPPER TUBE TERMINALS AND SPLICES PART NO. CT CT CT CT CT CTBL CS CONDUCTOR SIZE mm STUD mm LENGTH L WIDTH W INSIDE D HOLE dø PACK SIZE RECOMMENDED TOOLING CT CT CT CT CT CTBL CS CT CT CT CT CTBL CS CT0 CT0 CT0 CT0BL CS CT30H CT30 CT30 CT30BL CS x CT00H CT00 CT00BL CS x..9 1 Consult Kompress CT00H CT00 CT00BL CS x..9 1 Consult Kompress SPECIAL PURPOSE HOLE SPECIAL Size range to 0mm With holes in the palm for standard transformer mounting. LONG PALM Size range to 00mm Double length palm,normally supplied blank but holes can be provided to order. COPPER PIN Size range to 00mm Pin dimensions on request. RIGHT ANGLE Size range to 00mm With palm 90º angle to barrel.

5 COMPRESSION TOOLS KT 1. to mm Simple service pliers incorporating wire stripper and cutter. 1. to mm KT17 to mm Precision ratchet tools ensuring a full crimp. to mm Rugged mechanical rack and pinion multistroke tool with ratchet control. Six hexagonal die sets are required for full range. See tooling chart. to 1mm Lightweight, but sturdy mechanical tool, ideal for crimping terminals with limited access. Three hexagonal die sets are required for full range. See tooling chart. KT to mm Versatile lightweight tool with fine screw adjusted dies providing indent crimp. to mm Hand hydraulic tool with multistroke action. Thirteen hexagonal die sets are required for full range. See tooling chart.

6 COMPRESSION TOOLS to mm Consists of KV13C crimping head and KHFP Foot Pump plus connecting hose. Thirteen hexagonal die sets are required for full range. See tooling chart. to 30mm Consists of KV3H crimping head and KHFP Foot Pump plus connecting hose. Fifteen hexagonal die sets are required for full range. Adaptors required for sizes to mm See tooling chart. CABLE AREA mm TOOLING SELECTION CHART FOR STANDARD COPPER CONDUCTORS HAND PLIERS KT HAND RATCHET TOOLS KT17 LARGE RATCHET TOOLS KT LARGE HAND TOOL KT HAND OR FOOT HYDRAULIC TOOLS KV13C or KV3H 1.. 3C C 3C 1 3C 0 3C 3C C C C C 13C 13C 13C 13C *13C *13C *13C *13C 0 3C 1 3C 3C 3C 0 C C C C 01 13C 13C 13C 13C0 *13C *13C *13C *13C C 1 3C 1 3C C 01 13C1 13C1 13C 13C *13C1 *13C1 *13C *13C Chart shows Die Part Number for given tooling type indicates suitable tool with Integral Die For non Standard conductors consult Kompress 13C Consult Kompress Consult Kompress *13C V3H 0 V3H 30 *Requires adaptor V3H TA/BA NOTES While every effort has been made to ensure that the information contained in this catalogue is accurate, Kompress reserves the right to amend the size and specifications of its products in line with its policy of continuing improvement and development. 7