neis co.,ltd Policy neis challenges new capabilities of joining technology through intensive research and development for new ways.
|
|
- Lorin Jefferson
- 7 years ago
- Views:
Transcription
1 Policy neis challenges new capabilities of joining technology through intensive research and development for new ways. neis co.,ltd 1.Specialty Welding / Brazing Consumables Outline: Company name neis co.,ltd. Established Jan Capital 150,000,000. Headquarters 20-1 Kitadaimotsu-cho Amagasaki-city Hyogo Pref. Certified: ISO 9001 Vacuum Brazing Factory ISO14001 Headquarters & Factories Nippon Kaiji kyokai (NK) Mitsubishi Heavy Industries Takasago Plant for ASME Hitachi,Hitachi plant, for Welding Fabrication and AlBc Overlay 2.Welding / Brazing Fabrications and Rebuildings A Member of: The Japan Welding Society The Japan Welding Engineering Society The Japan Welding Rods Association Japan Vacuum Industry Association 3.Vacuum Engineering Business Stages: 1. Specialty Welding / Brazing Consumables A supplier of products and technical information 2. Welding / Brazing Fabrications and Rebuildings A welding and brazing contractor. Our welding engineers support customers to maintain industrial equipments and chemical machines made of special alloy materials. 3. Vacuum Engineering A supplier of custom specific vacuum devices and equipments assembled in vacuum furnace or by appropriate joining methods.
2 neis Consumables Sixty years of neis brazing & welding specialty products and technical service have been appreciated by our customers support and reliance. Brazing products: Alloys of Silver, Phosphorus, Copper, Nickel, and for Vacuum filler. Their forms available in rods,wire, strip, paste, sheet(much wider than strip), powder, clad(newly developed), and preforms. FCW for aluminum brazing (new product) Fluxes made for the specific metals, temperatures, and conditions of your brazing applications. Automated Equipment engineered and manufactured to match your production requirements Welding products: FCW of specific use for resistance of corrosion, abrasion, erosion, and heat as well as specific use of Electrodes. FCW:GC2Z is widely applied for Zn dip- coated tubes and plates in piping and shipbuilding industry. neis consumables Flux cored Aluminum wire, Alu 19 FCW Aluminum ring preforms Automated equipment of Aluminum brazing
3 neis Welding / Brazing Fabrication and Re-building More than fifty years actual results of specialty welding performance in the maintenance of plant machinery (blowers, impellers, pumps, rotary feeders, screw feeders, centrifugal separators, mixers, crashers, heat exchangers, large scale valves, and so on) have been appreciated by users high reliance. Our maintenance welding on industrial machines range over in such plants as steel, paper, cement, petrochemical, synthetic resin, oil refinery, copper, aluminum, mining, shipbuilding, automobile, and environment. Our welding performance extends over such diversified procedures as fabrications replaced by higher grade materials, renewals, repairs, build-ups, hard facings, corrosion or heat resistance lining to make life longer and to save cost alike. Centrifugal separator, over hauled with WC pieces brazed along screw contour Hydroelectric power, Al.bronze lining on a seal ring High Pressure Rotary Feeder, over hauled with the rotor overlayed by neis FCW GC410N-4X
4 neis Vacuum Engineering More than 50 years experienced expertise of non- ferrous metals welding/brazing has enabled neis to be engaged in vacuum engineering of making such devices and equipment exposed to high vacuum as used in the facilities or the institutes of research & development of semi-conductor manufacturing, liquid crystals, medical apparatus, optics, atomic energy, beam accelerator, and synchrotron radiation (called Spring-8,the biggest facility in the world). neis is one of the leading companies to be able to supply solution for vacuum brazing problems by virtue of neis vacuum specific filler metals as well as to fabricate high vacuum chambers,ducts, cells, and their assemblies with the facilities of five high vacuum furnaces and a clean room 330 sq.m. He-leak detecting in clean room Vacuum furnaces No.1 No.2 No.3 No.4 No.5 Heat zone H H H H H Max. service temperature Atmosphere Carrier gas in high vacuum at 10-5 torr Ar, H 2, N 2
5 Ceramics window, brazed with a copper cell and stainless steel flanges all in one time ITO chamber Medical device conponent Cryo cylinder, copper and SUS tube brazed No.2 Vacuum furnace
6 neis co.,ltd URL: Head Office : 20-1 kitadaimotsu-cho Amagasaki, Tel Fax somu@neis-co.com Market Development Dept. Tel Fax kaihatsu@neis-co.com Tokyo Office : Kiba Kotoku Tokyo, Tel Fax tokyo@neis-co.com Major Facilities: 5 Welding/Brazing factories and offices: Located at Chiba, Nagoya, Amagasaki, Kurashiki, Kyushu. 5 Sales offices: Located at Tokyo, Shizuoka, Nagoya, Osaka, Hiroshima. Consumables Factory, Vacuum Factory, Technical Research and Service Dept. with a test laboratory, are located in the same area with Head Office above. Overseas: neis(thailand) Co.,Ltd Factory and Sales office. Amatanakorn Indutrial Estate 700/436 Moo7 Bangna-Trad Highway Km57,Donhuaroh, Muang District, Chonburi Thailand Tel Fax thai@neis-co.com
Welding. Module 19.2.1
Welding Module 19.2.1 Hard Soldering Hard soldering is a general term for silver soldering and brazing. These are very similar thermal joining processes to soft soldering in as much that the parent metal
More informationINDIAN STANDARDS (BIS) ON WELDING
** IS 82:957 Glossary of terms relating to welding and cutting of Sep 2008 metals 2 IS 83:986 Scheme of symbols for welding (revised) Sep 2008 3 IS 84:2004 Covered electrodes for manual metal arc welding
More informationEngineered Solutions
Engineered Solutions Long established partnerships bring together the world s leading instrumentation companies within BKW. Our manufacturing facility enables us to quickly adapt standard instruments to
More informationChapter 5 - Aircraft Welding
Chapter 5 - Aircraft Welding Chapter 5 Section A Study Aid Questions Fill in the Blanks 1. There are 3 types of welding:, and, welding. 2. The oxy acetylene flame, with a temperature of Fahrenheit is produced
More informationSurface Engineering Solutions Rebuild, Repair and Protect Industrial Equipment
Surface Engineering Solutions Rebuild, Repair and Protect Industrial Equipment Whatever You Rebuild, Repair and Protect...... Find the Right Solution! Henkel's Solutions for all Surface Engineering Needs
More informationFEATURES AND BENEFITS OF DIFFERENT PLATINUM ALLOYS. Kris Vaithinathan and Richard Lanam Engelhard Corporation
FEATURES AND BENEFITS OF DIFFERENT PLATINUM ALLOYS Kris Vaithinathan and Richard Lanam Engelhard Corporation Introduction There has been a significant increase in the world wide use of platinum for jewelry
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationV&A PROCONTROL. Rotary Valve Actuators Pneumatic & Hydraulic On-Off / Control / ESD Double Acting Spring Return All Steel SIL 3
V&A PROCONTROL Rotary Valve Actuators Pneumatic & Hydraulic OnOff / Control / ESD Double Acting Spring Return All Steel SIL 3 V R VP Series Technical Information V&A Procontrol VP series pneumatic steel
More informationBRIEF PROJECT PROFILE ON WELDING ELECTRODE MANUFACTURING. Turn key project suppliers EUREKA SYSTEMS AND ELECTRODES PVT.LTD.
BRIEF PROJECT PROFILE ON ELECTRODE MANUFACTURING Turn key project suppliers EUREKA SYSTEMS AND ELECTRODES PVT.LTD. M A C H I N E R Y D I V I S I O N 11/15A, SELVARAJAPURAM, CHINTHAMANI PUDUR COIMBATORE
More informationHow To Run A Test Lab In Rourkela
TESTING LABORATORY ROURKELA 1. Background: Keeping in view of the growing demand of quality of the products of the industries, Govt. has established Testing Laboratory, Rourkela, under the Directorate
More informationWORD DEFINITION WORD (NATIONAL LANGUAGE)
WELDING GLOSSARY The Glossary has been created as part of the Migration for Development in the Western Balkans (MIDWEB) project, which received financial assistance from the European Commission IPA 2009
More informationLead & Magnet Wire Connection Methods Using the Tin Fusing Method Joyal A Division of AWE, Inc.
Lead & Magnet Wire Connection Methods Using the Tin Fusing Method Joyal A Division of AWE, Inc. Abstract The technology for connecting lead and magnet wires for electric motors and electro mechanical devices
More informationIntroduction to Manufacturing Process
Introduction to Manufacturing Process What is Manufacturing? The English word manufacture is several centuries old. The term manufacture comes from two Latin words, manus (hand) and factus (make). As per
More informationSOLFRUNT Pressure Gauges and Other Products for the Process Industries
A1 SOLFRUNT Pressure Gauges and Other Products for the Process Industries AMETEK s line of high quality process gauges are specifically designed to meet the demanding needs of the chemical and petroleum
More informationStainless steel grade chart
Stainless steel grade chart ATLAS STEELS METAL DISTRIBUTION Chemical analysis (%) specified C Si Mn P S Cr Mo Ni Other Austenitic stainless steels 253MA S30815 0.05 1.1-2.0 0.8 0.040 0.030 20.0-22.0 10.0-12.0
More informationWear Resistant Coatings. Corrosion Protection
Wear Resistant Coatings Thermal Spray Technologies offers an almost endless variety of coating solutions to provide Wear Resistance. Wear mechanisms including erosion, abrasion, adhesion, cavitations,
More informationAbout Sintered Products. Products for: - Resistance Welding Electrodes - Electrical Contact Materials. Product Definition & Uses.
AMPCO Sintered Alloys Products for: - Resistance Welding Electrodes - Electrical Contact Materials Product Definition & Uses The high electrical and thermal conductivity of copper is combined with arc-resistant
More informationScrew Plug Immersion Heaters
Immersion Heaters Overview Immersion Heaters consist of hairpin bent tubular elements brazed or welded into a screw plug and provided with terminal enclosures for electrical connections. Immersion Heaters
More informationBELZONA KNOW-HOW VALVES, PIPES AND FITTINGS BELZONA VPF SYSTEM SELECTOR BELZONA KNOW-HOW FOR VALVES, PIPES AND FITTINGS
KNOW-HOW FOR THE REPAIR, RENOVATION AND RECLAMATION OF VALVES, PIPES AND FITTINGS B E L Z O N A V P F VPF SYSTEM SELECTOR FOR VALVES, PIPES AND FITTINGS SYSTEM Belzona VPF-1 Belzona VPF-2 Belzona VPF-3
More informationEML 2322L MAE Design and Manufacturing Laboratory. Welding
EML 2322L MAE Design and Manufacturing Laboratory Welding Intro to Welding A weld is made when separate pieces of material to be joined combine and form one piece when heated to a temperature high enough
More informationVacuum. How It Relates to Refrigeration And Air Conditioning Service
Vacuum How It Relates to Refrigeration And Air Conditioning Service Moisture In A Refrigeration System Visible Moisture Water Droplets Uncommon, but it can occur Invisible Moisture Water Vapor Found in
More informationSpecifications for Programs: 737, 747, 757, 767, 777, 787
= Performed by GKN BAC 5000 AN General Sealing 6-262, 6-265, 6-267, 6-270 PSD for 787 Only: 6-242, 6-269, 6-271 PSD for 777 Only: 6-261,6-264, 6-266, 6-269, 6-271 BAC 5004 L Installation of Permanent Fasteners
More informationBASIS RANGE TMB SERIES
BASIS RANGE SERIES magnetic driven pumps BASIS The pumps belong to Argal s BASIS range and feature, single stage, centrifugal impeller and magnetic drive. The range of pumps includes five models to deliver
More informationGE Oil & Gas. Air cooled heat exchangers Robust and reliable for all loads and applications
GE Oil & Gas Air cooled heat exchangers Robust and reliable for all loads and applications What it is Air cooled heat exchangers are commonly used in industrial applications where a reliable source of
More informationwww.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 45 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT 1.0 SCOPE 2 2.0 CONFLICTS
More informationCompact pressure switch Flameproof enclosure Ex d Model PCA
Mechatronic pressure measurement Compact pressure switch Flameproof enclosure Ex d Model PCA WIKA data sheet PV 33.31 for further approvals see page 4 Process Compact Series Applications Pressure monitoring
More informationCopper Alloys COPPER ALLOYS. Weld Tech News VOL 1. NO. 8
Copper Alloys Weld Tech News VOL 1. NO. 8 WELD TECH NEWS is a newsletter for welders working primarily in maintenance and repair. Each issue contains useful information on materials (cast irons, steels,
More informationABEL Positive Displacement Pumps
Membrane Pumps Solids Handling Pumps High Pressure Pumps Marine Pumps ABEL Positive Displacement Pumps Units for Process Engineering and optimal Solids Transport The International Experts ABEL Positive
More informationALLOY 2205 DATA SHEET
ALLOY 2205 DATA SHEET UNS S32205, EN 1.4462 / UNS S31803 GENERAL PROPERTIES ////////////////////////////////////////////////////// //// 2205 (UNS designations S32205 / S31803) is a 22 % chromium, 3 % molybdenum,
More informationGE Oil & Gas. Air Cooled Heat Exchangers. Robust and reliable for all loads and applications
GE Oil & Gas Air Cooled Heat Exchangers Robust and reliable for all loads and applications What it is Air cooled heat exchangers are commonly used in industrial applications where a reliable source of
More informationEurovacuum EV Series. Single Stage Oil Sealed Rotary Vane Pump
Eurovacuum EV Series Single Stage Oil Sealed Rotary Vane Pump Eurovacuum EV Series Single Stage Oil Sealed Rotary Vane Pumps Eurovacuum Company is offering its various products to meet industrial vacuum
More informationSTEAM STERILIZERS FOR THE LIFE SCIENCES MADE IN THE USA
STEAM STERILIZERS FOR THE LIFE SCIENCES MADE IN THE USA We Listen to Your Needs For over 35 years R-V Industries, Inc. has partnered our engineering and manufacturing expertise with customer ideas to produce
More informationProcurement, Inventory Management and Supply Chain solutions for the Petrochemicals sector
Procurement, Inventory Management and Supply Chain solutions for the Petrochemicals sector 1 2 About us Saudi Maintenance and Supply Chain Management Company (SMSCMC) is a top-tier integrated supply chain
More informationSECTION 23 81 03 - PACKAGED ROOFTOP AIR CONDITIONING UNITS NON-CUSTOM
SECTION 23 81 03 - PACKAGED ROOFTOP AIR CONDITIONING UNITS NON-CUSTOM PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Packaged rooftop air conditioning unit (5 tons and smaller). 2. Roof curb. 1.2
More informationHeating, Ventilation, Air Conditioning and Refrigeration (HVACR)
Heating, Ventilation, Air Conditioning and Refrigeration (HVACR) I. Demonstrate safety skills in typical HVACR work situations to NATE Core Installer Knowledge Areas for Technician Excellence for Safety
More informationTIG torches... 3-2 to 3-5 Tungsten electrodes... 3-6 to 3-7 TIG consumables... 3-8 Miscellaneous... 3-9
3- welding torches........................................................... 3-2 to 3-5 Tungsten electrodes........................................ 3-6 to 3-7 consumables........................................................
More informationSPECIFICATIONS FOR STEEL PIPE
SPECIFICATIONS FOR STEEL PIPE Published pipe standards serve three functions. 1. They dictate manufacturing and testing requirements and prescribed methods of measuring the required mechanical and physical
More informationRESIDENTIAL HEATING OIL SERVICE CONTRACT ANNUAL COST $276.00
RESIDENTIAL HEATING OIL SERVICE CONTRACT This service contract covers all routine service and maintenance of your residential oil fired furnace or boiler. In addition this contract covers all service calls
More informationwww.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 10 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT SCOPE 2 REFERENCES
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationGAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
More informationAPI Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
More information1.. Warm Welcome.. To
1.. Warm Welcome.. To WHO WE ARE 2 The International Leader in Production of Industrial Components & Parts (Metal and Plastic) The Global OEM (Original Equipment Manufacturer) for Air Conditioners, Freezers,
More informationRubber Lining for Projects
Rubber Lining for Projects Trelleborg Rubber Lining - the ONE safeguard for wear and corrosion protection Trelleborg Rubber Linings can be applied to many surfaces to significantly reduce abrasive wear,
More informationEROSPACE MOVING FORWARD WITH NBM W W W. N B M M E T A L S. C O M LEADING MANUFACTURER & MASTER DISTRIBUTOR OF BRASS, BRONZE, & COPPER ALLOYS
MOVING FORWARD WITH NBM W W W. N B M M E T A L S. C O M SPECIALTY COPPER ALLOYS FOR THE AEROSPACE INDUSTRY EROSPACE LEADING MANUFACTURER & MASTER DISTRIBUTOR OF BRASS, BRONZE, & COPPER ALLOYS NBM s corporate
More informationAGJ APRÍTÓGÉPGYÁR Kft.
1 AGJ APRÍTÓGÉPGYÁR Kft. Headquarters: H 5100 Jászberény, Honvéd u.27. Location: H 5100 Jászberény, Sportpálya u.1. Postal address: H 5101 Jászberény, PF.: 44 Tel.: +36 57 515 355, Fax: +36 57 515 356
More informationMASTER CYLINDER. Section 2. Master Cylinder. Tandem Master Cylinder. Master Cylinder
MASTER CYLINDER Master Cylinder The master cylinder converts the motion of the brake pedal into hydraulic pressure. It consists of the reservoir tank, which contains the brake fluid; and the piston and
More informationHow to Conduct a Magnet Pull Test
1 How to Conduct a Magnet Pull Test Many manufacturers today invest thousands if not millions of dollars annually into magnetic separation equipment, proactively reducing the risk that any foreign object
More informationAUSTENITIC STAINLESS DAMASCENE STEEL
AUSTENITIC STAINLESS DAMASCENE STEEL Damasteel s austenitic stainless Damascene Steel is a mix between types 304L and 316L stainless steels which are variations of the 18 percent chromium 8 percent nickel
More informationDESIGN STANDARDS SECTION 23 60 00
PART 1 - GENERAL 1.01 Work included: A. Piping, tubing and fittings. B. Piping specialties. C. Special duty valves. D. Refrigerants. E. Chillers. F. Refrigerant monitors. 1.02 General requirements: A.
More informationWELDING & CUTTING MAIN EQUIPMENT
GASES DIVISION GAS WELDING & CUTTING EQUIPMENT WELDING & CUTTING MAIN EQUIPMENT GAS WELDING & CUTTING KIT The MARIGASES GAS WELDING AND CUTTING KIT is a high quality set containing all the tools and components
More informationHuffman Welding & Machine, Inc.
6224 Avenue O Fort Madison, IA 52627 Phone: 319-372-7232 Fax: (319) 372-3469 www.huffmanwelding.com - Tool & Die, Fabrication, Sheet Metal, Electrical - - Millwright - - Industrial Maintenance - - Automated
More informationSoldering, Brazing, and Welding
This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. All rights reserved. 46 Section Introduction to Plumbing Soldering, Brazing, and Welding Objectives This chapter
More informationTHE SPECIAL STRENGTH OF AVEK HAARLEM
Avek haarlem, technical SPRINGS CUSTOM- DESIGNED AND MANUFACTURED OF TECHNICAL PRODUCTS FROM STRIP AND WIRE THE SPECIAL STRENGTH OF AVEK HAARLEM Customer focussed design and development of technical products
More informationProjects and R&D activities
Projects and R&D activities J.M. Jimenez On behalf of the Vacuum, Surface and Coatings Group (VSC) Vacuum, Surface and Coatings group* Mandate Design, construction, operation, maintenance and upgrade of
More informationTube Type Oil Skimmer Comparison
Process Overview- Tube Type Oil Skimmers Oil flows down the face of the skimmer and into a sludge pan that is plumbed to a barrel. Model BG01 & BG34 or 6V Oil Skimmer 1.0 or 3/4 Diameter Collector Tube
More informationHeat Pipe Selection Revision 12/04/2001
Heat Pipe Selection Revision 12/04/2001 Heat pipes are being used very often in particular applications when conventional cooling methods are not suitable. Once the need for heat pipe arises, the most
More informationSECTION 1 COMPANY OVERVIEW
problems Selection of the problem 29 Section 4: Problem Formulation Cognitive Map of the problem 34 Theoretical Framework 35 Second Cognitive Map of the problem 45 Diagnostic formulation 46 Section 5:
More informationGoulds AF. Axial Flow Pump
Goulds AF Axial Flow Pump Goulds AF The Industry Leader in Circulating Pump Technologies Fabricated design 42-66 (1050-1600 mm) (shown with optional spring mounted base) Cast design 6-36 (150-900 mm) Goulds
More informationPump Specifications 405 Series Commercial Drain Pump (High-Temp) 2 Solids handling
Pump Specifications 405 Series Commercial Drain Pump (High-Temp) 2 Solids handling 405_P1 R1/27/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
More informationIndependence Flexibility
Czech Precision Forge, a.s. Tylova 57, 316 00 Plzeň Tel.: +420 378 132 467 Fax: +420 378 132 516 inquiry@cpforge.com www.cpforge.com Independence Flexibility Three characteristics that differentiate Czech
More informationCONTENTS. ZVU Engineering a.s., Member of ZVU Group, WASTE HEAT BOILERS Page 2
WASTE HEAT BOILERS CONTENTS 1 INTRODUCTION... 3 2 CONCEPTION OF WASTE HEAT BOILERS... 4 2.1 Complex Solution...4 2.2 Kind of Heat Exchange...5 2.3 Heat Recovery Units and Their Usage...5 2.4 Materials
More informationPump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling
Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling 250_P1 R10/7/2015 Copyright 2015 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
More informationExternal Wrapping of Steel Riser Pipe. Case Study HJ3 CS200902
External Wrapping of Steel Riser Pipe Case Study HJ3 CS200902 Introduction Refineries process a wide variety of petroleum products. As part of the process, they rely on cooling towers, which recycle water
More informationA.A.NAJJAR TRADING EST.
A.A.NAJJAR TRADING EST. Source of ferrous and non ferrous metals Page 1 ABOUT US We, serve to the requirements of various Industries such as Refineries, Oil & Gas Plants, Fertilizers, Power, Pharmaceuticals,
More informationCATHODIC PROTECTION SYSTEM DESIGN
CATHODIC PROTECTION SYSTEM DESIGN Presented By DENIS L ROSSI P.E. CORROSION ENGINEER New England C P Inc. Corrosion Fundamentals What is corrosion? It is defined as the degradation or deterioration of
More informationGRU Purchasing Material Group Codes
Title Code Trees and shrubs 10161500 Floral plants 10161600 Non flowering plants 10161800 Fertilizers and plant nutrients and herbicides 10170000 Pest control products 10190000 Minerals and ores and metals
More informationEconosto UK. www.econosto.uk.com. LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345
LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345 ABERDEEN Econosto UK Ltd Blackness Road Altens Industrial Estate Aberdeen AB12 3LH T:
More informationHeating, Ventilation and Air Conditioning
Heating, Ventilation and Air Conditioning The Montgomery County Students Construction Trades Foundation, Inc has developed a comprehensive construction technology program designed to prepare students for
More informationINSTRUMENTATION & CONTROLS VALVE & AUTOMATION EXPERTS VALVE REPAIR TUBE SERVICES
INSTRUMENTATION & CONTROLS VALVE & AUTOMATION EXPERTS VALVE REPAIR TUBE SERVICES GREAT PRODUCTS ARE ONLY PART OF OUR SUCCESS. YOU SHOULD MEET OUR PEOPLE. From the machinist with over 20 years experience
More informationPIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta
PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved
More informationVertical selfpriming Side-Channel Pumps Type WPV
Vertical selfpriming Side-Channel Pumps Type WPV FIELD OF APPLICATION The side-channel pumps are selfpriming and operate more economically (better efficiency) than normal centrifugal pumps when handling
More informationFlyMe Environmental impact assessment MHI/ 24-1-2007 Page 1(6) 2 Description and assessment of the Production process
Page 1(6) Fly Me CHAIR 1 Description and assessment of the Materials used in the Product 2 Description and assessment of the Production process 3 Description and assessment of the Surface Treatment Methods
More informationExplosion-Proof Electric Unit Heaters
Type FX4 FX4 Explosion-Proof Electric Air Heaters FX4 heaters are UL listed and/or CSA certified for use in hazardous locations. They are designed for dry indoor industrial applications such as oil refineries,
More informationSECTION 22 LIGHTNING PROTECTION SYSTEM
SECTION 22 LIGHTNING PROTECTION SYSTEM 22.01 SCOPE: A. These Specifications shall form a part of the Contract Documents and shall govern construction work for all buildings to be built or modified for
More informationUniquely designed and engineered specifically for the pulp and paper industry.
Universal SPU2 Series Uniquely designed and engineered specifically for the pulp and paper industry. For more than half a century, Waukesha Cherry-Burrell has been a leader in the design, manufacturing
More informationVe-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
More informationNon-Destructive Testing
Non-Destructive Testing Bureau Veritas is one of the largest Testing, Inspection and Certification service providers in the world. First established in 1828, Bureau Veritas now spans the globe with a network
More informationPump Division MNR MND. Absorber Recirculation Pumps. Bulletin PS-10-32 (E)
MNR MND Absorber Recirculation Pumps Bulletin PS-10-32 (E) Pump Supplier To The World Flowserve is the driving force in the global industrial pump marketplace. No other pump company in the world has the
More informationData Sheet VITOSOL 100. Flat collectors for the utilisation of solar energy. Vitosol 100. Part nos. and prices: see price list
VITOSOL 100 Flat collectors for the utilisation of solar energy Data Sheet Part nos. and prices: see price list File in: Vitotec 1 Manual, Index 16 Vitosol 100 Type s 1.7 Vitosol 100 Type s 2.5 Vitosol
More informationAluminium Plate-Fin Heat Exchangers
Aluminium Plate-Fin Heat Exchangers 2 Contents. 3 Introduction 4 Aluminium plate-fin heat exchangers Characteristics Applications Benefits 6 Engineering Design standards Technical data Quality management
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 310S (S31008)/ EN 1.4845 Introduction: SS310 is a highly alloyed austenitic stainless steel designed for elevated-temperature service.
More informationIntroduction FRIGERIO ETTORE spa Lecco (Italy) Rev.09 1 / 19
Introduction FRIGERIO ETTORE spa Lecco (Italy) Rev.09 1 / 19 HISTORY Frigerio Ettore S.p.A. is a family run company founded in 1948 with a strong presence in the European metal working market. Frigerio
More informationSummary of Changes in. ASME Section IX, 2000 Addenda
Summary of Changes in ASME Section IX, 2000 Addenda Prepared by Walter J. Sperko, P.E. Sperko Engineering Services, Inc 4803 Archwood Drive Greensboro, NC 27406 USA Voice: 336-674-0600 FAX: 336-674-0600
More informationHIGH STANDARD VALVES FOR NON-STANDARD CONDITIONS.
HIGH STANDARD VALVES FOR NON-STANDARD CONDITIONS. ZWICK: MANUFACTURER OF HIGH STANDARD TRIPLE OFFSET VALVES. 100% ZERO-LEAKAGE 100% MADE IN GERMANY 100% QUALITY Zwick is a leading manufacturer of valves
More informationWelding of Plastics. Amit Mukund Joshi. (B.E Mechanical, A.M.I.Prod.E)
Welding of Plastics Amit Mukund Joshi (B.E Mechanical, A.M.I.Prod.E) Introduction Mechanical fasteners, adhesives, and welding processes can all be employed to form joints between engineering plastics.
More informationFind job and training opportunities at SteadyGrowth.ca
3 4 Find job and training opportunities at SteadyGrowth.ca 5 6 7 8 9 10 11 12 13 14 Manitoba Trades What you do Program Entry Requirements Years to Complete Program Where the Jobs are Minimum Wages Apprentice
More informationCooling and Heat Exchanger Solutions
Cooling and Heat Exchanger Solutions We are proudly South African and passionate about delivering world class solutions to all industries, from power generation and petrochemical, steel and aluminium to
More informationEuroFID Total Hydrocarbon Analyzer. Precise Determination of Total Hydrocarbons in Air for Corrosive as well as Condensing Gases
Product information EuroFID Total Hydrocarbon Analyzer Precise Determination of Total Hydrocarbons in Air for Corrosive as well as Condensing Gases Proven Analyzer Technology Measuring total hydrocarbons
More information5.23.22 STEAM AND CONDENSATE PIPING AND PUMPS DESIGN AND CONSTRUCTION STANDARD PART 1: GENERAL. 1.01 Purpose:
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationbuilding engineering services association specification for: Domestic Heating www.thebesa.com
building engineering services association specification for: Domestic central Heating installation www.thebesa.com building engineering services association acknowledgments Guide to good practice: Domestic
More informationNorth American Stainless
Introduction: North American Stainless Flat Products Stainless Steel Grade Sheet 309S (S30908)/ EN1.4833 SS309 is a highly alloyed austenitic stainless steel used for its excellent oxidation resistance,
More information15823 N. Barkers Landing Houston, TX 77079 281/556 8774 david.hendrix@hghouston.com www.hghouston.com
D a v i d E. H e n d r i x, P. E. RESUME 15823 N. Barkers Landing Houston, TX 77079 281/556 8774 david.hendrix@hghouston.com www.hghouston.com Experience: 2013 1990 President, The Hendrix Group Inc., A
More informationPUMPS OPERATION, MAINTENANCE & TROUBLESHOOTING
Training Title PUMPS OPERATION, MAINTENANCE & TROUBLESHOOTING Training Duration 5 days Training Venue and Date Pumps Operation, Maintenance & Troubleshooting 5 24 28 Nov $3,750 In any of the 5 star hotels.
More informationCooking at the Speed of light!
Cooking at the Infrared Cooking & Colouring Infrabaker is a modular infrared continuous cooking system developed by Infrabaker International. The machine is designed to cook and/or put colour on a wide
More information