Stereo Bluetooth Earphones Warranty Details

Transcription

1

2 Stereo Bluetooth Earphones Warranty Details The product is guaranteed to be free from defects in workmanship and parts for a period of 36 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion. The benefits conferred by this warranty are in addition to all rights and remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. After Sales Support After Sales Support Telephone: YEAR WARRANTY

3 1 Dear customer, Congratulations on purchasing a high quality MAGINON product. You have purchased modern Bluetooth Sports Earphones with excellent technical features and respective accessories, which are extremely easy to operate. Please study all notices carefully and diligently. Please study this information in detail observing, in particular, all the safety instructions. The earphones come with a 3 year warranty. You will need the warranty card and proof of purchase to return the earphones if defective. Keep these in a safe place together with the Instruction Manual. Please include the Instruction Manual when passing on the earphones to a third party. 1. Contents of box Carefully unpack the Bluetooth Sports Earphones and check if the box contains all of the components listed below: 1. MAGINON Bluetooth Sports Earphones BTH USB charging cable 3. Over ear holder 4. 3 pairs of ear adapters (S/M/L) with rubber stabilisers 5. Sports armband 6. Instruction manual 7. Warranty documents Note: Caution! Keep plastic foil and bags away from babies and small children, as otherwise danger of suffocation.

4 2 2. Contents 1. CONTENTS OF BOX 1 2. CONTENTS 2 3. HAZARD, SAFETY AND WARNING NOTICES 3 4. YOUR BLUETOOTH SPORTS EARPHONES 6 5. PREPARATION Charging the battery Fixing ear adapters and over ear holder Switching earphones on and off Establish Bluetooth connection Establishing multiple connections USING THE BLUETOOTH SPORTS EARPHONES Music playback Making phone calls Overview of control display Restoring default settings TECHNICAL SPECIFICATION SYSTEM INFORMATION, MAINTENANCE AND DISPOSAL Care Storage Disposal WARRANTY AND SERVICE CONFORMITY INDEX 20

5 3 3. Hazard, safety and warning notices Incorrect use of the Bluetooth Sports Earphones and accessories can be dangerous for you and others and can damage or destroy the earphones. We therefore ask you to read and strictly observe the following Hazard, safety and warning notices. Intended use These Bluetooth Sports Earphones are designed for the playback of audio signals. They have been designed for private use and are not suitable for commercial purposes Hazards for children and persons with limited ability to operate electronic equipment Earphones, accessory and packaging are not toys for children. These should therefore always be kept away from children. Danger of electrocution, poisoning and suffocation. The earphones and accessory may not be used by children and persons with impaired ability to operate such equipment. Earphones and USB charging cables may only be used by persons physically and mentally able to operate these safely. Note for Bluetooth equipment Bluetooth equipment operates with short wave radio signals. This can affect the operation of other electronic equipment or medical equipment. Switch of earphones in areas where their operation is prohibited. Do not use earphones in medical facilities, on board of aircrafts, at petrol stations or near to automatic fire detectors or automatically controlled equipment. Keep earphones at least 20 cm away from pacemakers and other medical equipment. Radio waves can influence the function of heart pacemakers and other medical equipment.

6 4 Electrocution hazard in wet and humid conditions Earphones and USB charging cable may not be exposed to dripping or spray water. Also do not place any containers filled with liquid, such as vases or glasses on top or immediately next to the device. Danger of fire and electrocution. Do hot charge earphones close to water. Danger of fire and electrocution. Do not charge earphones in areas of high humidity, considerable steam, smoke or dust. Danger of fire and electrocution. Electrical hazard In the event of foreign bodies or liquid having entered the Bluetooth Sports Earphones, switch off earphones. Leave everything to dry out fully. Otherwise danger of fire or electrocution. If the earphones have been dropped or the housing has been damaged switch earphones off. Otherwise danger of fire or electrocution. The earphones may not be taken apart, modified or repaired. Danger of fire and electrocution. Damage from heat fire hazard Do not leave earphones in places that are susceptible to considerable increases in temperature (e.g. inside a vehicle). The housing and internal parts may be damaged, which in turn could cause a fire. Do not wrap up earphones or place on textiles. This could produce a build-up of heat in the earphones that can cause deformation of the housing and may represent a fire hazard. Hazards of using the lithium-polymer batteries Risk of explosion in case of incorrect changing of the integrated batteries. Do not throw integrated battery into fire, short-circuit battery or take battery apart. Danger of explosion. Battery must be disposed of in line with the Battery Directive.

7 5 Injuries and material damage Damage to the electronics or to the housing caused by external influences, such as electric shocks, falls or others are not covered by the warranty and shall to be charged for. WARNING In order to prevent any damage to your hearing, avoid listening at high volume over long periods of time.

8 6 4. Your Bluetooth Sports Earphones Control LED 2. Charging contacts 3. Microphone 4. Right earphone 5. Left earphone 6. Button [+] 7. Multi-function button [ ] Button [ ] 9. USB charging cable 10. Cable support 11. Retaining clamp 12. Charging contact 13. Ear adapter (S/M/L) 14. Over ear holder

9 7 5. Preparation Prior to using the Bluetooth Sports Earphones, first charge the integrated lithiumpolymer battery. You can then connect the earphones to a Bluetooth device such as a Smartphone or a Tablet PC Charging the battery Prior to using the Bluetooth Sports Earphones or in case of low charge level, the integrated battery must be charged. A low charging level is indicated, by the earphones giving off five audio signals every five minutes and the flashing control LED. To charge the battery, the supplied USB charging cable must be connected to the earphone marked with R, as shown below. Insert the upper end of the earphones cable into the provided cable support at the USB charging cable. Now open the retaining clamp by pushing it together. Connect the contacts of the retaining clamp to the contacts of the earphones and close retaining clamp again.

10 Fixing ear adapters and over ear holder The earphones are supplied with three different sized ear adapters, from which you can select the suitable size. Push the desired ear adapter over the loudspeaker of your earphones until it is fully covered. Simply pull off earphones to change adapter. To attain a better hold when wearing the earphones, the supplied over ear holder can also be used. Please do not cover the microphone with the over ear holder. To avoid this, the over ear holder has a cut out for the microphone Switching earphones on and off Switch on the Bluetooth Sports Earphones by keeping the multi-function button depressed [ ] for approx. 4 seconds until the blue control LED flashes During switch-on the last used Bluetooth connection is automatically reinstated. To switch off the earphones again, keep multi-function button- [ ] depressed for approx. another 4 seconds until the red control LED lights up for approx. 1 sec Establish Bluetooth connection In order to establish a new connection between the Bluetooth Sports Earphones and a Bluetooth device, the earphones must be switched on in the connection mode. Whilst the earphones are switched off hold down multi-function key [ ] for approx. 8 seconds until the control LED flashes blue and red.

11 9 The process for establishing a connection can differ depending on the Bluetooth device. Please also check the manual of the Bluetooth device for further information. Now proceed as follows: 1. The distance between the Bluetooth Sports Earphones and Bluetooth device should not exceed 1 meter. 2. Switch on Bluetooth Sports Earphones in connection mode (see above). 3. Activate you re the Bluetooth function in your Bluetooth device. 4. Search for Bluetooth devices within the range and select entry BTH100 from the list of available devices. 5. Where required enter password 0000 (not required for devices using Bluetooth V2.1 or higher). 6. If the device prompts to establish a connection, select Yes. 7. Select the Bluetooth list of the mobile device BTH After successful connection the control LED of the earphones light up blue every 4 sec. Information about establishing a connection: If it is not possible to connect, switch off the earphones and try again. Maybe the battery of the earphones has to be recharged or the distance to the Bluetooth device must be decreased. Once a connection has been established it is stored in the earphones and in the Bluetooth device. The connection is then automatically established as soon as the earphones and the Bluetooth are within range again. The Bluetooth Sports Earphones can store up to 8 connections. In the event of more than 8 connections, the oldest connection is deleted, when a new connection is stored. When switched on, the Bluetooth Sports Earphones automatically connect to the last connected Bluetooth device. In order to connect to another device as per sections 1-8, the Bluetooth function of the currently connected device should first of all be switched off.

12 Establishing multiple connections The Bluetooth Sports Earphones offer the option of establishing simultaneous connections to two Bluetooth devices. Proceed as follows: 1. Connect the first device to the earphones as described in section Switch on earphones by keeping the multi-function button [ ] depressed for approx. 8 seconds, thus reactivating the connecting mode. 3. Now establish the connection to a second Bluetooth device as described in section Connect the first Bluetooth device again to the earphones. Information about multiple connections: The devices store the connections after successful multiple connection. The devices do therefore not have to be set up again when used next. During switch-on the earphones automatically connect to the last two connected Bluetooth devices. To switch off the multiple connection mode, first change to the Standby mode (no Bluetooth device connected). Hold down the multi-function button [ ] and button [+] at the same time until a reducing sound is audible. To switch on the multiple connection mode again first change to the Standby mode (no Bluetooth device connected). Hold down the multi-function button [ ] and button [+] at the same time until an increasing sound is audible.

13 11 6. Using the Bluetooth Sports Earphones When a connection exists to the Bluetooth device the earphones can be used to listen to music, select titles or control the volume. You can also accept phone calls when connected to a Smartphones Music playback If the connected Bluetooth device supports standard A2DP, wireless transmission of music to the Bluetooth Sports Earphones is possible. The control options listed in the below table are available. Function Status of earphones Action Volume + Music playback Briefly depress button [+] Volume - Music playback Briefly depress button [ ] Previous title Music playback Depress button [+] for a longer time Next title Music playback Depress button [-] for a longer time Pause Music playback Briefly depress button [ ] Playback Pause Briefly depress button [ ] Playback information: On some mobile radio devices music is played back through their loudspeakers rather than the Bluetooth Sports Earphones. In this open menu of mobile radio device and select audio output through Bluetooth device BTH100. Once the minimum or maximum volume setting has been reached, a brief signal tone can be heard.

14 12 The functions Previous title, Next title, Pause and Playback are only available for Bluetooth devices supporting the AVRCP standard. Please also study the manual of the Bluetooth device for further information Making phone calls Calls from a connected Smartphone can be handled by the Bluetooth Sports Earphones. The earphones contain a microphone for this purpose. Below the functions available though the earphones are listed. Please note, however, that not all listed functions are available with all Smartphone models. Please also observe the information in the manual of your Smartphone. Function Status of earphones Action Terminate call Outgoing call Briefly depress button [ ] Answer call Incoming call Briefly depress button [ ] Reject call Incoming call Depress button [ ] for approx. 2 seconds until signal tone can be heard Terminate call Active call Briefly depress button [ ] Volume + Active call Briefly depress button [+] Volume - Active call Briefly depress button [ ] Move call to mobile device Take over call from mobile device Active call Depress button [ ] for approx. 2 seconds Active call Depress button [ ] for approx. 2 seconds

15 13 Function Status of earphones Action Mute microphone Active call Depress button [+] for approx. 2 seconds Cancel mute Voice input of number Redial last number Active call (microphone muted) Standby mode (device connected) Standby mode (device connected) Depress button [+] for approx. 2 seconds Depress buttons [ ] and [+] simultaneously Depress button [ ] twice Information about answering calls: The functions and information sounds can differ from one mobile device to the next. Once the minimum or maximum volume setting has been reached, a brief signal tone can be heard. If the call is directly accepted using the buttons of the mobile device, some Smartphone models keep the calls at the device. You can take over the call with the earphones, as described above. If the microphone is muted and a call is active, a double sound is played every 10 seconds. You can also handle two calls at once with the Bluetooth Sports Earphones. These can either be routed over a single Smartphone or two parallel connected Smartphones. The available functions are listed next page.

16 14 Making one call through a mobile device Function Status of earphones Action Accept new call and end current call Accept new call and put current call on hold Change between two calls End current call and activate call on hold Active call and incoming call Active call and incoming call Active call and one call on hold Active call and call on hold Briefly depress button [ ] Briefly depress button [ ] Depress button [ ] twice Briefly depress button [ ] Making two calls through a mobile device For this function simultaneous connection to two Smartphones must have been set up (see section 5.5.). Function Status of earphones Action Hold call on device 1 and accept call on device 2 End call on device 1 and accept call on device 2 Change between the two calls End call on device 1 and reactivate call on device 2 Active call and an additional incoming call Active call and in addition incoming call Active call and one held call Active call and one held call Press button [ ] twice Briefly depress button [ ] Press button [ ] twice Briefly depress button [ ]

17 Overview of control display An overview of the potential displays of the control LED is shown below. LED display Red permanent light Red light off Flashing red and blue Flashing blue every two seconds Flashing blue every 4 seconds Constantly flashing blue Short flashes every 2 seconds Flashing red Earphones status Battery is being charged Fully charged Connection mode No device connected Connection is being set up Active or incoming call Call active Low battery 6.4. Restoring default settings In order to reset all settings of the Bluetooth Sports Earphones press button [+] for approx. 4 seconds during charging until the control LED flashes red and blue. In addition a quadruple sound signal can be heard. During resetting of the settings also any stored connections of the Bluetooth Sports Earphones are deleted. When the earphones are switched on, the connection mode is automatically active. New connections can thus be directly created.

18 16 7. Technical specification Element Description Model MAGINON BTH-100 Bluetooth version V4.0 Bluetooth profile A2DP, AVRCP, HFP, HSP Bluetooth signal strength Class 2 Signal range 10 m integrated battery Lithium-ion battery with 85 mah Power supply 5.0 V, 60 ma Battery power 4 hours music; 4.5 hours telephoning Charging period approx. 2 hours Charging function USB charging function Noise level 92 db (at 1 khz) Frequency range Hz Microphone Integrated microphone Dimensions 14.5 mm x 35 mm x 32.6 mm Weight approx g Note: We reserve the right to make technical and visual changes to the product as part of product improvements.

19 17 8. System information, maintenance and disposal Trademark information Bluetooth is a registered trademark of Bluetooth SIG Care Do not use any corrosive cleaners such as mentholated spirits, thinners, etc. for cleaning the Bluetooth Sports Earphones or supplied accessory. When required, clean system components with a soft dry cloth Storage Check that the integrated battery is charged after the earphones have not bee used for some time A. On a day-to-day basis and for longer periods the batteries can be kept at a dry location out of reach of children. The earphones should also not be stored in areas exposed to too low or too high temperatures Disposal For disposal, separate packaging into different types and dispose of in line with environmental regulations in supplied collection containers. Batteries and storage batteries may not be disposed of in domestic waste. Consumers are obliged by law to return used batteries to communal collection points or dealers selling batteries. Storage batteries and batteries do therefore contain the adjacent symbol. The adjacent symbol indicates that electrical and electronic equipment may not be disposed of in domestic waste in the EU. Please use the returns and collection points of your local council or contact your dealer you purchased the product from. This prevents potentially hazardous effects on the environment and health as a result of incorrect disposal. For further information contact the respective department of your local council.

20 18 9. Warranty and Service Our service outlets will be happy to assist you in case of problems with the operation of the device or with any queries and problems. The device comes with a 3-year manufacturer s warranty. Please see the enclosed Warranty Card for details. Please contact our hotline prior to returning a defective device. Service address: Schenker Australia Pty Ltd MAGINON Service P.O. Box 329 Villawood, NSW 2163 Australia Tel.: Manufacturer's address: supra Foto-Elektronik-Vertriebs-GmbH Denisstr. 28A Kaiserslautern Germany

21 Conformity This device was tested according to Part 15 of the FCC regulations and it was confirmed that the device complies with the limit values for class B digital devices. The aim of these limit values is to provide appropriate protection against adverse sources of interference in case of a domestic installation. If the device is not installed in accordance with the instructions, it may cause interference for TVs, radios and mobile radios. This device may be operated provided that the following is being observed: (1) This device may not produce any harmful interference. (2) The device must accept the effects of any interference. This includes interference that may cause undesired operation or operational faults. In the event of radio or television reception being affected by this device this can be easily tested by switching the device on and off the user should try to remedy the fault by taking the following action: Turning the receiving aerial in another direction or changing its location. Increasing the distance between the device and the receiver. Contact your dealer or a radio/tvexpert. The Manufacturer hereby declares that the CE marking was applied to the product in accordance with the basic requirements and other relevant provisions of the following European Directives: 2011/65/EG RoHs directive 2004/108/EG EMC directive The EC Declaration of Conformity can be requested from the address specified on the Warranty card.

22 Index A Accessory 1, 6 B Basic settings 15 Battery 7, 16 Buttons 6 C Cable support 6, 7 Calls 12 Charging contacts 6 Charging period 16 Charging status 7 Charging the battery 7 Conformity 19 Connection mode 8 Control LED 6, 15 D Disposal 17 E Ear adapter 6, 8 Establish connection 8 H Hazard information 3 M Microphone 6 Multiple connection 10 Music playback 11 Muting 13 P Password 9 R Retaining clamp 6, 7 S Safety information 3 Service 18 Signal range 16 Stabiliser 6, 8 Switching on and off 8 T Technical specification 16 U USB charging cable 6, 7 Use 11 V Volume 11, 12 W Warning information 3 Warranty 18

23 Stereo Bluetooth Earphones Repair and Refurbished Goods or Parts Notice Unfortunately, from time to time, faulty products are manufactured which need to be returned to the Supplier for repair. Please be aware that if your product is capable of retaining user-generated data (such as files stored on a computer hard drive, telephone numbers stored on a mobile telephone, songs stored on a portable media player, games saved on a games console or files stored on a USB memory stick) during the process of repair, some or all of your stored data may be lost. We recommend you save this data elsewhere prior to sending the product for repair. You should also be aware that rather than repairing goods, we may replace them with refurbished goods of the same type or use refurbished parts in the repair process. Please be assured though, refurbished parts or replacements are only used where they meet ALDI s stringent quality specifications. If at any time you feel your repair is being handled unsatisfactorily, you may escalate your complaint. Please telephone us on or write to us at: supra Foto-Elektronik-Vertriebs-GmbH Denisstr. 28A Kaiserslautern Germany Telephone: After Sales Support Telephone: YEAR WARRANTY

24 supra Foto-Elektronik-Vertriebs-GmbH Denisstr. 28A Kaiserslautern Germany /