Page Cb-1 Cb-13 CF. Female Metric Light Series Swivel 90 Elbow (Ball Nose) DKL 90 C9

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Page Cb-1 Cb-13 CF. Female Metric Light Series Swivel 90 Elbow (Ball Nose) DKL 90 C9"

Transcription

1 Overview DIN Metric CA Cb-1 CE Cb-2 Page Cb-1 Cb-13 CF Cb-3 D0 Cb-4 Female Metric 24 Light Series with O Ring Swivel Straight ISO SWS-L DKOL C0 Cb-4 Female Metric 24 Light Series with O Ring Swivel 45 Elbow ISO SWE 45 -L DKOL 45 C3 Cb-5 Female Metric 24 Light Series with O Ring Swivel 90 Elbow ISO SWE-L DKOL 90 C4 Cb-5 Male Metric 24 Light Series Rigid Straight ISO S-L CEL C5 Cb-6 Female Metric Very Light Series LL Swivel Straight (Ball Nose) DKM 1D Cb-6 Female Metric Light Series Swivel Straight (Ball Nose) DKL DD Cb-7 Female Metric Light Series Swivel 45 Elbow (Ball Nose) DKL 45 5D Cb-7 Female Metric Light Series Swivel 90 Elbow (Ball Nose) DKL 90 C9 Cb-8 Metric Standpipe Light Series Rigid Straight ISO BEL 0C Cb-9 Metric Standpipe Light Series Rigid 45 Elbow BEL 45 1C Cb-10 Metric Standpipe Light Series Rigid 90 Elbow ISO BEL 90 D2 Cb-11 Female Metric 24 Swivel Heavy Series with O Ring Straight ISO SWS-S DKOS C6 Cb-12 Female Metric 24 Swivel Heavy Series with O Ring 45 Elbow ISO SWE 45 -S DKOS 45 3D Cb-12 Female Metric 24 Swivel Heavy Series with O Ring 90 Elbow ISO SWE-S DKOS Cb-13 Male Metric 24 Rigid Heavy Series Straight ISO S-S CES Female Metric Swivel Heavy Series Straight (Ball Nose) DKS Metric Standpipe Rigid Heavy Series Straight ISO BES Metric Banjo Straight DIN 7642 BSP 92 Cb-14 B1 Cb-15 Page Cb-14 Cb-20 B2 Cb-16 B4 Cb-17 Female BSP Parallel Pipe Swivel Straight (60 Cone) BS5200-A DKR EA Cb-17 Female BSP Parallel Pipe Swivel 45 Elbow (60 Cone) BS 5200-D DKR 45 EB Cb-18 Female BSP Parallel Pipe Swivel 90 Elbow (60 Cone) BS 5200-B DKR 90 EC Cb-18 Female BSP Parallel Pipe Swivel 90 Elbow Block Type (60 Cone) BS 5200-E DKR 90 D9 Cb-19 BSP Swivel Female with O Ring (60 Cone) BS 5200 ISO DKOR 91 Cb-20 BSP Swivel Female with O Ring 45 Elbow (60 Cone) BS 5200 ISO DKOR 45 B5 Cb-20 BSP Swivel Female with O Ring 90 Elbow (60 Cone) BS 5200 ISO DKOR 90 Male BSP Parallel Pipe Rigid Straight (60 Cone) BS5200 AGR Male BSP Taper Pipe Rigid Straight BS5200 AGR-K Female BSP Parallel Pipe Swivel Straight (Flat Seat) Cb-Index

2 Overview SAE 01 Cb Cb-22 Page Cb-21 Cb Cb Cb-23 Male NPTF Pipe Rigid Straight SAE J476A / J516 AGN 06/68 Cb-24 Male JIC 37 Rigid Straight ISO S AGJ 08 Cb-25 Male SAE 45 Rigid Straight SAE J Cb-25 Male SAE Straight Thread with O Ring Rigid Straight ISO SAE J516 37/3V Cb-26 Female JIC 37 SAE 45 Dual Flare Swivel Straight ISO SWS DKJ 39/3W Cb-27 Female SAE 45 Swivel Straight SAE J516 41/3Y Cb-28 Male JIC 37 Rigid 45 Elbow ISO AGJ 45 L9 Cb-28 Female JIC 37 SAE 45 Dual Flare Swivel Female 45 Elbow ISO SWE 45 DKJ 45 Female JIC 37 SAE 45 Dual Flare Swivel Female 90 Elbow ISO SWES DKJ 90 Female JIC 37 / 45 Swivel Female 90 Elbow (Long) ISO SWEL DKJ 90 L Female JIC 37 Swivel 90 Elbow Medium Drop ISO SWEM DKJ 90 M Flange 15 Cb Cb-30 Page Cb-29 Cb Cb-31 6A Cb-32 SAE Code 61 Flange Head Straight ISO S-L SFL 3000 psi 6F Cb-32 SAE Code 61 Flange Head 45 Elbow ISO E45 L SFL psi 6N Cb-33 SAE Code 61 Flange Head 90 Elbow ISO E L SFL psi SAE Code 62 Flange Straight ISO S-S SFS 6000 psi SAE Code 62 Flange 45 Elbow Heavy Series ISO E45-S SFS psi SAE Code 62 Flange 90 Elbow ISO psi ORFS JC Cb-34 Female ORFS Swivel Straight Short ISO SWSA SAE J516 ORFS J1 Cb-38 JS Cb-35 ORFS Swivel Female (Long) ISO SWSB SAE J516 ORFS J5 Cb-38 Page Cb-34 Cb-39 J7 Cb-36 Female ORFS Swivel 45 Elbow ISO SWE 45 SAE J516 ORFS 45 JM Cb-39 J9 Cb-37 Female ORFS Swivel 90 Elbow Short Drop ISO S SAE J516 ORFS 90 JD Cb-39 Female ORFS Swivel 90 Elbow Long Drop ISO SWEL SAE J 516 ORFS 90 L Female ORFS Swivel 90 Elbow Medium Drop ISO SWEM ORFS 90 M ORFS Male ISO S SAE J516 Male ORFS Bulkhead with Locknut Straight (with O ring) ISO SAE J516 Cb-Index

3 Overview JIS Page Cb-40 Cb-41 FU GU MU Cb-40 Cb-40 Cb-41 MZ Cb-41 Female BSP Parallel Pipe Swivel Straight (30 Flare) ISO JIS B8363 GUI Female BSP Parallel Pipe Swivel Straight (60 Cone) ISO JIS B8363 GUO Female Metric Swivel Straight (30 Flare) JIS B8363 MU Female Metric Swivel 90 Elbow (30 Flare) JIS B8363 French Standard FG F2 Cb-42 Cb-42 Page Cb-42 Cb-44 F4 Cb-43 F6 Cb-43 Male French Gas Series Rigid Straight (24 Cone) F9 Cb-44 Female French Gas Series Swivel 90 Elbow FA Cb-44 Female French Gas Series Swivel Straight (Ball Nose) French Male Metric Series (24 Cone) French Female Metric Series Swivel (Ball Nose) Metric Male for Agriculture Valves High Pressure Cleaning Page Cb-45 CW NW Cb-45 Cb-45 Power Cleaner Connection Female Kärcher Metric Cleaning Hose Fitting Swivel Straight (New Design) Others DK Cb-46 Page Cb-46 DX Cb-46 Male Metric L Rigid Bulkhead with Locknut (24 Cone) Female Metric Swivel (M27x2) O Ring Light Series UPTC Universal push-to-connect Page Cb-47 Cb-48 EN EU ET Cb-47 Cb-47 Cb-48 UPTC Male Straight UPTC Male 45 Elbow UPTC Male 90 Elbow Cb-Index

4 DIN Metric CA Female Metric 24 Light Series with O Ring Swivel Straight ISO SWS-L DKOL Part Number Thread O.D. A B W DN Inch Size mm metric mm mm mm mm 1CA CA / M12x CA CA / M14x CA CA / M16x CA CA / M18x CA CA / M14x CA CA / M16x CA CA / M18x CA CA / M14x CA CA / M16x CA CA / M18x CA CA / M22x CA CA / M26x CA CA / M18x CA CA / M22x CA CA / M26x CA CA / M22x CA CA / M26x CA CA / M30x CA CA / M26x CA CA / M30x CA CA / M36x CA CA M30x CA CA M36x CA CA M45x CA / M36x CA / M45x CA / M45x CA / M52x Hose fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -30 C up to +105 C. Hose fittings with special O-rings (Viton or EPDM) available on request. For O-ring dimensions and part-numbers see Section Eb SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-1

5 DIN Metric CE Female Metric 24 Light Series with O Ring Swivel 45 Elbow ISO SWE 45 -L DKOL 45 Part Number Thread O.D. A B E W DN Inch Size mm metric mm mm mm mm mm 1CE CE / M12x CE CE / M14x CE CE / M16x CE CE / M18x CE CE / M14x CE CE / M16x CE CE / M18x CE CE / M16x CE CE / M18x CE CE / M22x CE CE / M18x CE CE / M22x CE CE / M26x CE CE / M22x CE CE / M26x CE CE / M26x CE CE / M30x CE CE / M36x CE CE M30x CE CE M36x CE / M45x CE / M45x CE / M52x Hose fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -30 C up to +105 C. Hose fittings with special O-rings (Viton or EPDM) available on request. For O-ring dimensions and part-numbers see Section Eb SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-2

6 DIN Metric CF Female Metric 24 Light Series with O Ring Swivel 90 Elbow ISO SWE-L DKOL 90 Part Number Thread O.D. A B E W DN Inch Size mm metric mm mm mm mm mm 1CF CF / M12x CF CF / M14x CF CF / M16x CF CF / M18x CF CF / M14x CF CF / M16x CF CF / M18x CF CF / M16x CF CF / M18x CF CF / M22x CF CF / M18x CF CF / M22x CF CF / M26x CF CF / M22x CF CF / M26x CF CF / M30x CF CF / M26x CF CF / M30x CF CF / M36x CF CF M30x CF CF M36x CF / M36x CF / M36x CF / M45x CF / M45x CF / M52x Hose fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -30 C up to +105 C. Hose fittings with special O-rings (Viton or EPDM) available on request. For O-ring dimensions and part-numbers see Section Eb SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-3

7 DIN Metric D0 Male Metric 24 Light Series Rigid Straight ISO S-L CEL C0 Part Number Thread O.D. A B H DN Inch Size mm metric mm mm mm mm 1D D / M12x D D / M14x D D / M16x D D / M18x D D / M14x D D / M16x D D / M18x D D / M16x D D / M18x D D / M22x D D / M18x D D / M22x D D / M26x D D / M22x D D / M26x D D / M26x D D / M30x D D / M36x D D M36x D / M45x D / M45x D / M52x Female Metric Very Light Series LL Swivel Straight (Ball Nose) DKM 1C C / M30x C C / M38x C C M38x C / M45x C / M52x or Part Number Thread O.D. A B W DN Inch Size mm metric mm mm mm mm RH 461LT ST ST TWIN 301SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-4

8 DIN Metric C3 Female Metric Light Series Swivel Straight (Ball Nose) DKL Part Number Thread O.D. A B W DN Inch Size mm metric mm mm mm mm 1C C / M12x C C / M14x C C / M16x C C / M16x C C / M18x C C / M16x C C / M18x C C / M22x C C / M22x C C / M26x C C / M30x C C M36x C / M45x C4 Female Metric Light Series Swivel 45 Elbow (Ball Nose) DKL 45 1C C / M14x C C / M16x C C / M18x C C / M22x or Part Number Thread O.D. A B E W DN Inch Size mm metric mm mm mm mm mm RH 461LT ST ST TWIN 301SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-5

9 DIN Metric C5 Female Metric Light Series Swivel 90 Elbow (Ball Nose) DKL 90 Part Number Thread O.D. A B E W DN Inch Size mm metric mm mm mm mm mm 1C / M12x C C / M14x C C / M16x C C / M16x C C / M18x C C / M16x C C / M18x C C / M22x C C / M26x C C / M30x C C M36x D Metric Standpipe Light Series Rigid Straight ISO BEL 11D D / D D / D D / D D / D D / D D / D D / D D / D D / D D / D D / D D or Part Number O.D. A B C RH 461LT ST ST TWIN Not recommended for new construction. Instead use C3 or CA. Should be assembled with cutting ring and nut. ATTENTION: In case of cutting ring assembly a hardened assembly union has to be used. 301SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-6

10 DIN Metric DD Metric Standpipe Light Series Rigid 45 Elbow BEL 45 Part Number O.D. A B C E 1DD DD / DD DD / DD DD / Not recommended for new construction. Instead use CE. Should be assembled with cutting ring and nut. ATTENTION: In case of cutting ring assembly a hardened assembly union has to be used. mm 5D Metric Standpipe Light Series Rigid 90 Elbow ISO BEL 90 Part Number O.D. A B C E 15D D / D D / D D / D D / D D / Not recommended for new construction. Instead use CF. Should be assembled with cutting ring and nut. ATTENTION: In case of cutting ring assembly a hardened assembly union has to be used. mm SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-7

11 DIN Metric C9 Female Metric 24 Swivel Heavy Series with O Ring Straight ISO SWS-S DKOS Part Number Thread O.D. A B W DN Inch Size mm metric mm mm mm mm 1C / M14x C C / M16x C C / M18x C C / M20x C C / M22x C C / M16x C C / M18x C C / M20x C C / M22x C C / M24x C C / M16x C C / M18x C C / M20x C C / M22x C C / M24x C C / M20x C C / M22x C C / M24x C C / M30x C C / M24x C C / M30x C C / M30x C C / M36x C C M36x C C M42x C / M52x C / M52x Hose fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -30 C up to +105 C. Hose fittings with special O-rings (Viton or EPDM) available on request. For O-ring dimensions and part-numbers see Section Eb. Assembly only with Parkrimp 2 machine SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-8

12 DIN Metric 0C Female Metric 24 Swivel Heavy Series with O Ring 45 Elbow ISO SWE 45 -S DKOS 45 Part Number Thread O.D. A B E W DN Inch Size mm metric mm mm mm mm mm 10C C / M14x C C / M16x C C / M18x C C / M20x C C / M18x C C / M20x C C / M18x C C / M20x C C / M22x C C / M22x C C / M24x C C / M24x C C / M30x C C / M30x C C / M36x C C M36x C C M42x C / M52x C / M52x Hose fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -30 C up to +105 C. Hose fittings with special O-rings (Viton or EPDM) available on request. For O-ring dimensions and part-numbers see Section Eb. Assembly only with Parkrimp 2 machine SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-9

13 DIN Metric 1C Female Metric 24 Swivel Heavy Series with O Ring 90 Elbow ISO SWE-S DKOS 90 Part Number Thread O.D. A B E W DN Inch Size mm metric mm mm mm mm mm 11C C / M14x C C / M16x C C / M18x C C / M20x C C / M18x C C / M20x C C / M18x C C / M20x C C / M22x C C / M22x C C / M24x C C / M24x C C / M30x C C / M36x C C / M30x C C / M36x C C M36x C C M42x C / M52x C / M52x Hose fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -30 C up to +105 C. Hose fittings with special O-rings (Viton or EPDM) available on request. For O-ring dimensions and part-numbers see Section Eb. Assembly only with Parkrimp 2 machine SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-10

14 DIN Metric D2 Male Metric 24 Rigid Heavy Series Straight ISO S-S CES Part Number Thread O.D. A B H DN Inch Size mm metric mm mm mm mm 1D D / M14x D D / M16x D D / M18x D D / M20x D D / M16x D D / M18x D D / M20x D D / M22x D D / M18x D D / M20x D D / M22x D D / M20x D D / M24x D D / M24x D D / M30x D D / M30x D D / M36x D D M36x D D M42x D / M52x D / M52x SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-11

15 DIN Metric C6 Female Metric Swivel Heavy Series Straight (Ball Nose) DKS Part Number Thread O.D. A B W DN Inch Size mm metric mm mm mm mm 1C C / M16x C C / M18x C C / M20x C C / M20x C C / M22x C C / M24x D Metric Standpipe Rigid Heavy Series Straight ISO BES Part Number O.D. A B C 13D D / D D / D D / D D / D D / D D / D D / D D / D D / D D / D D / Not recommended for new construction. Instead use C9. Should be assembled with cutting ring and nut. ATTENTION: In case of cutting ring assembly a hardened assembly union has to be used SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-12

16 DIN Metric 49 Metric Banjo Straight DIN 7642 Part Number A B D / / / / / / / / / / / / / / To select corresponding screw and seals see section Eb. DN Inch Size mm mm mm mm SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-13

17 BSP 92 Female BSP Parallel Pipe Swivel Straight (60 Cone) BS5200-A DKR Thread A B W BSP DN Inch Size mm mm mm mm / /8x / /4x / /8x / /2x / /4x / /8x / /4x / /8x / /2x / /8x / /2x / /8x / /4x / /2x / /8x / /4x / /2x / /8x / /4x / x x /4x / /4x / /4x / /2x x SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-14

18 BSP B1 Female BSP Parallel Pipe Swivel 45 Elbow (60 Cone) BS 5200-D DKR 45 Thread A B E W BSP 1B B / /4x B B / /8x B B / /8x B B / /8x B B / /2x B B / /8x B B / /2x B B / /8x B B / /8x B B / /4x B B / /4x B B / x B B x B / /4x B / /4x B / /2x B x SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-15

19 BSP B2 Female BSP Parallel Pipe Swivel 90 Elbow (60 Cone) BS 5200-B DKR 90 Thread A B E W BSP 1B B / /8x B B / /4x B B / /8x B B / /2x B B / /8x B B / /8x B B / /2x B B / /8x B B / /2x B B / /8x B B / /8x B B / /4x B B / /4x B B / x B B x B / /4x B / /4x B / /2x B x SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-16

20 BSP B4 Female BSP Parallel Pipe Swivel 90 Elbow Block Type (60 Cone) BS 5200-E DKR 90 Part Number Thread A B E H W BSP mm 1B B / /4x B B / /8x B B / /8x B B / /2x B B / /2x B B / /8x B B / /4x B B x Short version available upon request (swaging on universal crimpers only) EA BSP Swivel Female with O Ring (60 Cone) BS 5200 ISO DKOR Thread A B W BSP DN Inch Size mm mm mm mm 1EA EA / /4x EA EA / /8x EA EA / /8x EA EA / /2x EA EA / /2x EA EA / /8x EA EA / /4x EA EA / /4x EA EA / x EA EA x EA / /4x Hose fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -30 C up to +105 C. Hose fittings with special O-rings (Viton or EPDM) available on request. For O-ring dimensions and part-numbers see Section Eb SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-17

21 BSP EB BSP Swivel Female with O Ring 45 Elbow (60 Cone) BS 5200 ISO DKOR 45 Thread A B E W BSP 1EB EB / /4x EB EB / /8x EB EB / /2x EB EB / /4x EB EB / /4x EB EB x Hose fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -30 C up to +105 C. Hose fittings with special O-rings (Viton or EPDM) available on request. For O-ring dimensions and part-numbers see Section Eb. EC BSP Swivel Female with O Ring 90 Elbow (60 Cone) BS 5200 ISO DKOR 90 Thread A B E W BSP 1EC EC / /4x EC EC / /8x EC EC / /2x EC EC / /2x EC EC / /8x EC EC / /8x EC EC / /8x EC EC / /4x EC EC / x EC EC x EC / /4x Hose fittings are delivered with ozone resistant Nitrile (NBR) O-ring as a standard version. Working temperature from -30 C up to +105 C. Hose fittings with special O-rings (Viton or EPDM) available on request. For O-ring dimensions and part-numbers see Section Eb SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-18

22 BSP D9 Male BSP Parallel Pipe Rigid Straight (60 Cone) BS5200 AGR Thread A B H BSP DN Inch Size mm mm mm mm 1D D / /8x D D / /4x D D / /8x D D / /2x D D / /4x D D / /8x D D / /4x D D / /8x D D / /2x D D / /8x D D / /2x D D / /8x D D / /4x D D / /2x D D / /8x D D / /4x D D / /4x D D / x D D x D D /4x D / /4x D / /4x D / /2x D SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-19

23 BSP 91 Male BSP Taper Pipe Rigid Straight BS5200 AGR-K Thread A B H BSP DN Inch Size mm mm mm mm / /4x / /8x / /4x / /8x / /4x / /8x / /2x / /8x / /2x / /4x / /4x x B5 Female BSP Parallel Pipe Swivel Straight (Flat Seat) Thread A B W BSP DN Inch Size mm mm mm mm 1B B / /4x B B / /4x B B / /8x B B / /2x B B / /8x B B / /2x B B / /2x B B / /4x B B / /4x B B / /4x B B x SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-20

24 SAE 01 Male NPTF Pipe Rigid Straight SAE J476A / J516 AGN Thread A B H NPTF DN Inch Size mm mm mm mm / /8x / /4x / /8x / /4x / /8x / /4x / /8x / /2x / /8x / /2x / /2x / /4x / /4x x11-1/ / /4x11-1/ / /4x11-1/ / /2x11-1/ x11-1/ SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-21

25 SAE 03 Male JIC 37 Rigid Straight ISO S AGJ Thread A B H UNF DN Inch Size mm mm mm mm / /16x / /2x / /16x / /2x / /16x / /4x / /16x / /2x / /16x / /4x / /8x / /4x / /8x / /16x / /8x / /16x / /16x / /16x / /16x /16x /8x / /8x / /8x / /8x /2x SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-22

26 SAE 04 Male SAE 45 Rigid Straight SAE J516 Thread A B H DN Inch Size mm UNF mm mm mm / /8x Male SAE Straight Thread with O Ring Rigid Straight ISO SAE J / /4x / /4x / /8x To select corresponding O-ring see Section Eb. Thread A B H UNF DN Inch Size mm mm mm mm SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-23

27 SAE 06/68 Female JIC 37 SAE 45 Dual Flare Swivel Straight ISO SWS DKJ Part Number Thread A B H W UNF / /16x / /16x / /2x / /2x / /16x / /2x / /2x / /4x / /4x / /16x / /16x / /2x / /2x / /4x / /4x / /8x / /16x / /16x / /4x / /8x / /16x / /4x / /8x / /16x / /16x / /16x / /4x / /8x /16x /16x /8x / /16x / /16x / /8x / /8x / /8x SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-24

28 SAE 08 Female SAE 45 Swivel Straight SAE J516 Part Number Thread A B H W DN Inch Size mm UNF mm mm mm mm / /8x Male JIC 37 Rigid 45 Elbow ISO AGJ 45 Thread A B E H DN Inch Size mm NPTF mm mm mm mm / /4x SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-25

29 SAE 37/3V Female JIC 37 SAE 45 Dual Flare Swivel Female 45 Elbow ISO SWE 45 DKJ 45 Thread A B E W UNF / /16x V V / /16x V V / /2x / /16x V V / /2x / /16x V V / /4x V V / / V V / /4x V V / /8x / /16x V V / /8x / /16x / /16x / /16x /16x /16x /8x / /8x / /8x / /8x SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-26

30 SAE 39/3W Female JIC 37 SAE 45 Dual Flare Swivel Female 90 Elbow ISO SWES DKJ / /16x W W / /16x W W / /2x / /16x W W / /2x / /16x W W / /16x W W / /4x W W / /8x / /16x W W / /4x W W / /8x / /16x W W / /8x / /16x / /16x / /16x /16x /16x /8x / /8x / /8x / /8x / /8x /2x Assembly only with Parkrimp 2 machine Thread A B E W UNF SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-27

31 SAE 41/3Y Female JIC 37 / 45 Swivel Female 90 Elbow (Long) ISO SWEL DKJ 90 L Thread A B E W UNF 13Y Y / /16x / /16x / /16x Y Y / /4x Y Y / /4x / /8x / /8x Y Y / /8x / /16x Y / /16x /16x L9 Female JIC 37 Swivel 90 Elbow Medium Drop ISO SWEM DKJ 90 M Thread A B E W UNF 1L L / /4x L L / /16x L L /16x SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-28

32 Flange 15 SAE Code 61 Flange Head Straight ISO S-L SFL 3000 psi Part Number A B F Flange DN Inch Size mm mm mm mm / / / / / / / / / / / / / / / / / / / / / / / / To select corresponding half-flange and O-ring see Section Eb SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-29

33 Flange 17 SAE Code 61 Flange Head 45 Elbow ISO E45 L SFL psi Part Number A B E F Flange / / / / / / / / / / / / / / / / / / / / / / / To select corresponding half-flange and O-ring see Section Eb SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-30

34 Flange 19 SAE Code 61 Flange Head 90 Elbow ISO E L SFL psi Part Number A B E F Flange / / / / / / / / / / / / / / / / / / / / / / / / / / / Assembly only with Parkrimp 2 machine To select corresponding half-flange and O-ring see Section Eb SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-31

35 Flange 6A SAE Code 62 Flange Straight ISO S-S SFS 6000 psi Part Number A B F Flange DN Inch Size mm mm mm mm 16A / / A A / / A / A A / A A A / / A / / A / / A To select corresponding half-flange and O-ring see Section Eb. 6F SAE Code 62 Flange 45 Elbow Heavy Series ISO E45-S SFS psi Part Number A B E F Flange 16F F / / F F F / / F / / To select corresponding half-flange and O-ring see Section Eb SN 301TC TC 421RH 421SN 421WC TC 471TC 472TC ST Cb-32

Working Pressure - Hose Ends

Working Pressure - Hose Ends Working Pressure - Hose Ends The maximum dynamic working pressure of a hose assembly is the lesser of the rated working pressure of the hose and the end connection used. HIGH SPECIALTY HOSE ACCESSORRIES

More information

PRODUCT CATALOGUE. burnettandhillman.co.uk &HYDRAULIC ADAPTORS. Burnett & Hillman Havyat Road, Wrington, Bristol BS40 5AE United Kingdom

PRODUCT CATALOGUE. burnettandhillman.co.uk &HYDRAULIC ADAPTORS. Burnett & Hillman Havyat Road, Wrington, Bristol BS40 5AE United Kingdom burnettandhillman.co.uk 2014 HYDRAULIC ADAPTORS Burnett Hillman Havyat Road, Wrington, Bristol BS40 5AE United Kingdom PRODUCT CATALOGUE T: +44 (0)1934 862596 F: +44 (0)1934 862616 E: sales@burnettandhillman.co.uk

More information

TECALEMIT FLEXIBLES SWAGE FITTINGS CATALOGUE CATALOGUE N Swage Fittings Catalogue

TECALEMIT FLEXIBLES SWAGE FITTINGS CATALOGUE CATALOGUE N Swage Fittings Catalogue TECALEMIT FLEXIBLES SWAGE FITTINGS CATALOGUE CATALOGUE N 777-89 Swage Fittings Catalogue Swage Fittings Catalogue - 1 Tenir au Temps Y.Tromelin & S.Bergsen Hannover 2005 TECALEMIT FLEXIBLES, renowned by

More information

How to Use This Booklet

How to Use This Booklet Accurate identification of ports and connectors in fluid piping systems is necessary before the correct hose or tube assembly can be selected and installed. With this booklet and a few simple tools, measurement

More information

Fittings for PTFE hose

Fittings for PTFE hose Raccordi per tubo PTFE / Fittings for PTFE hose Pagina / Page 2 2 3 3 5 Ghiere Ferrule GAS BSP 0TP1 00TC T051 T151 T350 Per Tubo 'T' Per Tubo 'TC' BSP straight BSP 90 BSP Male For 'T' hose For 'TC' hose

More information

800-348-8467 www.fittingsunlimited.com

800-348-8467 www.fittingsunlimited.com Thread and Port Identification Guide 800-348-8467 www.fittingsunlimited.com INDEX Index... 1 Explanation of Symbols... 2 How to Measure Threads... 3-4 Metric vs English Threads... 5 North American Connections

More information

Hose and Tube Fittings Series 1-3

Hose and Tube Fittings Series 1-3 Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose

More information

Test Fittings. Fluid Power Inc. ON THE LEADING EDGE OF TECHNOLOGY

Test Fittings. Fluid Power Inc. ON THE LEADING EDGE OF TECHNOLOGY Fluid Power Inc. ON THE LEADING EDGE OF TECHNOLOGY P.O. Box 97-63 Dixie Highway - Rossford, OH 43460 U.S.A. TOLL FREE: (877)-ICFLUID Tel: (419) 661-8811 Fax: (419) 661-8844 E-mail: us@icfluid.com Internet

More information

Overview EO 24 cone connections

Overview EO 24 cone connections Index Overview EO 24 cone connections... D3 Not recommended...d4 EO 24 cone end (DIN 3861/ISO 8434-1)/dimension... D4 EO 24 -DKO swivel connector (DIN 3865/DIN EN ISO 8434-1/-4)/dimensions... D5 Overview

More information

Working Pressure up to 630 bar / 9135 PSI

Working Pressure up to 630 bar / 9135 PSI Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30 / 931 630 / 9135

More information

Thread and End Connection

Thread and End Connection www.swagelok.com and End Connection Identification Guide 2 Contents Introduction and End Connection Terminology.. 4 General Terminology... 5 Step-by-Step Identification Procedure for s and End Connections...

More information

Visual Index O-Rings and Seals

Visual Index O-Rings and Seals O-Rings and Seals N O-Ring Face Seal ORFS O-Ring N4 XO O-Ring N4 Port Ends SAE, Metric,, JIS, K4 SAE O-Ring N4 ISO 6149 O-Ring N5 Metric O-Ring Metric Retaining Ring O-Ring Retaining Ring EOlastic Seal

More information

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant). Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)

More information

Couplings and Hose. Kurt Hydraulics 302 Jeffers Avenue, Lyman, NE Toll Free: Phone: Fax:

Couplings and Hose. Kurt Hydraulics 302 Jeffers Avenue, Lyman, NE Toll Free: Phone: Fax: Couplings and Hose Kurt Hydraulics 302 Jeffers Avenue, Lyman, NE 69352 Toll Free: 866.257.7995 Phone: 308.787.0127 Fax: 308.787.1281 KURT HYDRAULICS Kurt Manufacturing is a large multi-divisional manufacturing

More information

Technical information

Technical information Technical information 5 1.1 Hose assemblies as elements in hydraulic systems Hose assemblies Hose assemblies have to perform crucial functions. Apart from transmitting power by means of liquid (hydraulic

More information

CAT. 0113-GB MODELS. Series. Flat-face quick-release couplings. UNI EN ISO 9001 Cert. n 2905 ISO/TS 16949

CAT. 0113-GB MODELS. Series. Flat-face quick-release couplings. UNI EN ISO 9001 Cert. n 2905 ISO/TS 16949 CAT. 0113-GB NEW MODELS Flat-face quick-release couplings UNI EN ISO 9001 Cert. n 2905 ISO/TS 16949 FLAT-FACE QUICK-RELEASE COUPLINGS Features Benefits Applications Flat-face shut-off valves: easy to clean.

More information

PE100 pressure fittings

PE100 pressure fittings Table of contents Table of contents...1 pressure fittings Short fittings for butt-welding Stub flanges...2 Tees...8 Bends...15 Reducers...17 End caps...26 Unions...28 Adaptors...34 Long fittings Stub flanges...36

More information

CATALOGUE FOR HYDRAULIC FITTINGS

CATALOGUE FOR HYDRAULIC FITTINGS CATALOGUE FOR HYDRAULIC FITTINGS Contents HYDRAULIC ADAPTER CORSS REFERENCE...1 Accessories. 5 Female pipe swivel....8 SAE J518 Code 61 & 62 Flanges 13 37 JIC Fittings..... 19 37 Fittings.. 40 Hose Barbs..

More information

O-Ring Boss Fittings. Fitting and Port. Assembled

O-Ring Boss Fittings. Fitting and Port. Assembled Fittings Fitting and Port Assembled Adjustable ORB 360º Positioning Pressure Connections uses a 90 durometer, Buna-N (Nitrile) O-ring, with other compounds available upon request. The threads of the SAE

More information

The GS-Piping System consists of three flange systems which allow piping

The GS-Piping System consists of three flange systems which allow piping GS-FLANGE SYSTEM GS- connections...170 approvals, Pressure classes...171 GS-code key...172 Material possibilities...173 Assembly and installation General information...174 GS-37 flare system...175 GS-37,

More information

HYDRAULIC PIPING STANDARD HANDBOOK. Revision 1

HYDRAULIC PIPING STANDARD HANDBOOK. Revision 1 HYDRAULIC PIPING STANDARD HANDBOOK Revision 1 Preface We aim to fill a gap in technical literature. At this moment there are no hydraulic piping standards available which cover different pressure classes

More information

GS-FLANGE SYSTEM. Adaptors

GS-FLANGE SYSTEM. Adaptors daptors GS-FLNGE SYSTEM Index...424 R-...425 723-, 724-...426 725-, MF-...427 KM-, 727-...428 703-, 704-...429 707-, 708-...430 731-, 743-...431 744-, 746-...432 747-, 748-...433 741-, 745-...434 716-,

More information

ASSEMBLY INSTRUCTIONS ACCORDING TO SAE J1453 FOR FLARED TUBES. 5. Clean properly with appropriate products the part of the tube to be flared.

ASSEMBLY INSTRUCTIONS ACCORDING TO SAE J1453 FOR FLARED TUBES. 5. Clean properly with appropriate products the part of the tube to be flared. ASSEMBLY INSTRUCTIONS ACCORDING TO SAE J1453 FOR FLARED TUBES 1. Before to start to flare the tube check for the correct parameters of all the tools to be used and substitute 2. Cut the tube at a 90 angle

More information

FITTINGS 5-01. 82A series Aluminium (light weight) compression fittings Ø 6... 42 mm tube size, BSPP and BSPT thread

FITTINGS 5-01. 82A series Aluminium (light weight) compression fittings Ø 6... 42 mm tube size, BSPP and BSPT thread FITTINS 82 series luminium (light weight) compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 82 series rass compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 83 series luminium

More information

Hose Clamps & Fittings

Hose Clamps & Fittings All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw

More information

Hundreds of types of fittings

Hundreds of types of fittings Push-to-Connect Hundreds of types of fittings can be used with plastic and rubber tubing and hose. Our goal at NewAge Industries is to offer a good cross-section of fittings to efficiently connect our

More information

Geberit Mapress Catalogue 2008 / 2009. Valid from 1 April 2008

Geberit Mapress Catalogue 2008 / 2009. Valid from 1 April 2008 Geberit Mapress Catalogue 2008 / 2009 Vali from 1 April 2008 Mapress Stainless Steel Page 3 Mapress CrNi Steel Page 23 Mapress Stainless Steel silicone-free Page 25 Mapress Stainless Steel Gas Page 39

More information

kymanual or Automatic - it s your Choice

kymanual or Automatic - it s your Choice . kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.

More information

Transport & Automotive CATALOGUE. March 2011. Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au. www.tubefit.com.

Transport & Automotive CATALOGUE. March 2011. Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au. www.tubefit.com. Transport & Automotive CATALOGUE Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au March 2011 www.tubefit.com.au Page 1 4 6 9 12 14 16 17 19 20 22 23 24 26 28 29 31 33 Index

More information

PRESSURE AND FLOW FITTINGS TUTORIAL

PRESSURE AND FLOW FITTINGS TUTORIAL PRESSURE AND FLOW FITTINGS TUTORIAL The purpose of this document is to serve as a tutorial on pressure and vacuum fittings commonly used with FLUKE CALIBRATION products. The scope of this tutorial is limited

More information

Fittings and Accessories for Centralized Lubrication Systems and General Use

Fittings and Accessories for Centralized Lubrication Systems and General Use Fittings an Accessories for Centralize Lubrication Systems an General Use This brochure provies an overview of metalic pipe unions for flui engineering. This brochure is ivie into the sections Solerless

More information

Flare Fittings. The World Standard. SAE 45 Flared Fittings... D4. Inverted Flared Fittings... D14. Access Valves... D18

Flare Fittings. The World Standard. SAE 45 Flared Fittings... D4. Inverted Flared Fittings... D14. Access Valves... D18 Flare Fittings SAE 45 Flared Fittings... 4 Inverted Flared Fittings... 14 Access Valves... 18 The World Standard Flare Fittings Flare to ale PT 48F ale Connector 481FH ale Connector AVU1 ale Connector

More information

HYDRAULICS. Hydraulic Range. for applications up to 10,000 PSI (720 bar)

HYDRAULICS. Hydraulic Range. for applications up to 10,000 PSI (720 bar) HYDRAULICS Hydraulic Range for applications up to 10,000 PSI (720 bar) www.cejn.us CEJN Your Global Partner in Hydraulics reliable products with smart solutions for all applications CEJN is the global

More information

Pipe Fittings 5404N. Pg. 99 Increase & Extension Connector 1-MP 2-FP Pg. 97 Seamless Pipe Nipple 1-MP (Both) 2-LENGTH

Pipe Fittings 5404N. Pg. 99 Increase & Extension Connector 1-MP 2-FP Pg. 97 Seamless Pipe Nipple 1-MP (Both) 2-LENGTH 5000 (4038) 5050 5404 (4037) 5404N 5405 (4039) 5406 (4040) 5406C 5406P (3009E) Pg. 94 Pipe Coupling -FP -FP 5407 (3009A) Pg. 95 Union Pipe Coupling -FP -FP 5408 (3009G) Pg. 96 Hex Pipe Nipple -MP -MP 5409

More information

GENERAL & HIGH PRESSURE CHECK VALVES. VC Series. Kor-Lok USA

GENERAL & HIGH PRESSURE CHECK VALVES. VC Series.  Kor-Lok USA GENERAL & HIGH PRESSURE CHECK VALVES VC Series www.korlokusa.com Kor-Lok USA Features Valve Series Cracking Maximum Working VC3 General Purpose Fixed 3000 psig 207 bar VC6 High Fixed 6000 psig 413 bar

More information

Stainless Steel Single and Dual Circulation Kits

Stainless Steel Single and Dual Circulation Kits Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating

More information

BROEN UNiFlEx FiTTiNgs FOR BURNiNg gases OEN OEN ifl ifl FOR FOR BURN BURN gas gas

BROEN UNiFlEx FiTTiNgs FOR BURNiNg gases OEN OEN ifl ifl FOR FOR BURN BURN gas gas BROEN UNIFLEX Fittings FOR BURNIN ASES BROEN UniFlex TM Fittings for burning gases BROEN UniFlex TM Fittings for burning gases LAB Table of Contents Content Page Table of Content 2 Product Overview 3 BROEN

More information

Metric Hydraulic Compression Tube Fittings

Metric Hydraulic Compression Tube Fittings Metric Hydraulic Compression Fittings T A B L E O F C O N T E N T S Introduction Index Pages A to F Pages G to L FITTINGS to Unions Straight Male Connectors Elbow Male Connectors Run Tee Male Connectors

More information

UNLOCK THE SOLUTION 1

UNLOCK THE SOLUTION 1 UNLOCK THE SOLUTION 1 construction agriculture automation chemical plastics off-shore/land based oil & gas pulp & paper public utilities pharmaceutical marine food processing military mining forestry mobile

More information

Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:

Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below: Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees

More information

SAFETY BLOCK type BS 9.3 E 01-12

SAFETY BLOCK type BS 9.3 E 01-12 SAFETY BLOCK type BS 9.3 E 01-12 9.3.1 TECHNICAL DATA MAX OPERATING PRESSURE (PS): 420 bar PRESSURE TEST (PT): 1.43 x PS NOMINAL PASSAGE DIAMETER: 10mm, 20mm, 25mm, 32mm WORKING TEMPERATURE: -40 +150 FLUID

More information

KEYSTONE. Stainless steel hygienic butterfly valves F250 for imperial tubing F251 for metric tubing

KEYSTONE. Stainless steel hygienic butterfly valves F250 for imperial tubing F251 for metric tubing KEYSTONE Stainless steel hygienic butterfly valves F0 for imperial tubing F for metric tubing Features Keystone technology. Quarter turn operation. Isolation or regulation control. Equal percentage characteristics.

More information

A New Improved Range of Push-fit Fittings for Cold Water Services

A New Improved Range of Push-fit Fittings for Cold Water Services A New Improved Range of Push-fit Fittings for Cold Water Services A new improved range of Push-fit Fittings for Cold Water Services, with Stainless Steel Teeth to grip the pipe Push-fit Fittings for Cold

More information

Quick disconnect couplings

Quick disconnect couplings Quick disconnect couplings GS-FLNGE SYSTEM Cejn ISO 7241-...406 Cejn ISO 7241-...407 Cejn ISO 7241- Stainless steel...408 Intertraco screw-to-connect Series S...409 Intertraco screw-to-connect Flat-Face...410

More information

Spectifications. ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers)

Spectifications. ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers) Spectifications ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers) ANSI / ASME B1.20.1 ASME B16.10 ASME B16.11 ASME B16.25 ANSI / ASME B16.28 ANSI / ASME B16.34

More information

Pipe Thread Types and Designations

Pipe Thread Types and Designations Pipe Thread Types and Designations Overview: Different types of screw threads have evolved for fastening, and hydraulic systems. Of special concern are plastic-to-metal, taper/parallel threaded joints

More information

MFP14, MFP14S and MFP14SS Automatic Pumps

MFP14, MFP14S and MFP14SS Automatic Pumps Page 1 of 6 TI-P136-02 ST Issue 12 Cert. No. LRQ 0963008 ISO 9001, S and SS utomatic Pumps Description The Spirax Sarco automatic pump is a displacement receiver operated by steam or compressed air. It

More information

Piston Accumulators. SK Series. Accumulator Catalog. Piston Types. Description. Sealing Systems. End Cap. O-ring. Sealing System. Piston.

Piston Accumulators. SK Series. Accumulator Catalog. Piston Types. Description. Sealing Systems. End Cap. O-ring. Sealing System. Piston. SK Series Piston Types TYPE 2 pplication: Low-friction design for higher piston speeds, slow movements without stick-slip effect and high number of actuations (millions). ctual cycles achieved will vary

More information

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI 53072 U.S.A. Tel: 262-691-2222 FAX: 262-691-0312 E-mail: sales@dynexhydraulics.

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI 53072 U.S.A. Tel: 262-691-2222 FAX: 262-691-0312 E-mail: sales@dynexhydraulics. SPECIFICATIONS PF1000 Series Fixed Displacement Pumps Also refer to "Checkball Pump Installation and Operating Recommendations" Bulletin PSI.CB (dynexpumpinstallation.pdf) CONTACT INFORMATION USA Headquarters

More information

SV60 Safety Valve. Inlet sizes: DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125 and DN150. Valve type Inlet connection Outlet connection

SV60 Safety Valve. Inlet sizes: DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125 and DN150. Valve type Inlet connection Outlet connection Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

Parts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!

Parts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge! Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm

More information

Original NiTO Couplings. NiTO Industrial Spray Guns. NiTO Leading supplier of high quality couplings for the professional market www.nito.

Original NiTO Couplings. NiTO Industrial Spray Guns. NiTO Leading supplier of high quality couplings for the professional market www.nito. Original NiTO Couplings NiTO Industrial Spray Guns NiTO Leading supplier of high quality couplings for the professional market www.nito.com The complete Quick coupling programme from the leading manufacturer

More information

Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP. Feed Water Connector 1. 1/2" FIP x 1/2" MIP x 1/4" OD 2. 3.

Double-Headed Screw 1. 3/4 FIP x 3/4 MIP x 1/4 hole 2. 3/4 Fip x 3/4 MIP. Feed Water Connector 1. 1/2 FIP x 1/2 MIP x 1/4 OD 2. 3. Picture Item No. Description RO- 0010 Brass Water Feed 1. 3/4" FIP with 1/4" hole 2. Using on R.O. tank RO- O020 Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP RO- 0030 Brass

More information

universal BALL VALVES FLOATING MONOBLOC - WAFER SPLIT BODY - 2 PIECES TRUNNION 3 PIECES BODY SIDE & TOP ENTRY

universal BALL VALVES FLOATING MONOBLOC - WAFER SPLIT BODY - 2 PIECES TRUNNION 3 PIECES BODY SIDE & TOP ENTRY BALL VALVES FLOATING MONOBLOC - WAFER SPLIT BODY - 2 PIECES TRUNNION 3 PIECES BODY SIDE & TOP ENTRY CONSTRUCTION B 16.34 API 6A - API 6D BS 5351 EN 17292 SIZE FROM 1/2 TO 60 REDUCED AND FULL BORE CLASS

More information

The new VKD Ball Valve with Dual Block Technology. Dares to be different

The new VKD Ball Valve with Dual Block Technology. Dares to be different The new VKD Ball Valve with Dual Block Technology Dares to be different VKDUALBLOCK Durapipe are pleased to introduce the new VK Dual Block ball valve developed by FIP providing an advanced standard in

More information

MAXI PUMPS 63

MAXI PUMPS 63 MAXI PUMPS Cool running clean compact size easy to install environment-friendly PIAB Vacuum Pumps. 62 MAXI PUMPS 63 MAXI PUMPS MLL - Maxi Pump Aluminum body Noise level 72-76 db(a) Largest compressed air

More information

F250/F251 HYGIENIC BUTTERFLY VALVES PENTAIR HYGIENIC PROCESS VALVES (FORMERLY KEYSTONE) WELD/CLAMP/THREAD END CONNECTIONS

F250/F251 HYGIENIC BUTTERFLY VALVES PENTAIR HYGIENIC PROCESS VALVES (FORMERLY KEYSTONE) WELD/CLAMP/THREAD END CONNECTIONS PENTAIR HYGIENIC PROCESS VALVES (FORMERLY KEYSTONE) F0/F HYGIENIC BUTTERFLY VALVES WELD/CLAMP/THREAD END CONNECTIONS FOOD & BEVERAGE PROCESS SOLUTIONS PROCESS VALVE TECHNOLOGY PENTAIR HYGIENIC PROCESS

More information

2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES

2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES 2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:

More information

Ball Valves 2-Way Series

Ball Valves 2-Way Series Ball Valves 2-Way Series Pressures to 20,000 psi (1379 bar) Parker Autoclave Engineers high-pressure ball valves have been designed to provide superior quality for maximum performance within a variety

More information

Complete Systems & Parts Automatic Oiler & Grease Bank

Complete Systems & Parts Automatic Oiler & Grease Bank MADE IN THE USA Complete Systems & Parts Automatic Oiler & Grease Bank www.gosuburban.com 2 Lubrication Systems Lubrication Systems, a division of Suburban Manufacturing, manufactures a complete line of

More information

Push in Air Brake WIRA. Push In Compression

Push in Air Brake WIRA. Push In Compression 1 Push in Air Brake Push In Compression The push-in fitting is designed to be quick and easy to use, extremely versatile and totally secure. After undergoing strenuous tests, it is one of only a few push-in

More information

Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel)

Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel) OPTIONS: USE: AVAILABLE MODELS: Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel) DESCRIPTION The ADCA PRV47 pilot operated pressure reducing valves are designed for use on steam,

More information

Metric Composite Push-In Fittings

Metric Composite Push-In Fittings Metric Composite Push-In Fittings Version 2013 1.0 3058 Ranchview Lane North. Plymouth, MN 55447 Polyconn now offers a Metric fitting composite line to complement our inch composite fittings. They can

More information

BRASS FITTINGS FOR THREADED PIPES

BRASS FITTINGS FOR THREADED PIPES 03/14 BRASS FITTINGS GENERAL FEATURES The brass fittings for threaded pipes are used as junctions for pipelines with threaded connection UNI ISO 228/1. The thread dimensions are subdivided in various types

More information

Catalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI

Catalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI KSWA3... SW-3... Ball sert Type...9./2.... 42/6... 3 K2A... 3Z... Poppet sert Type...38/1... 3/... 4 CS41B... C4-3...

More information

Newloc Acetal. Plastic Push-to-Connect Fittings. Fluid Transfer Specialists

Newloc Acetal. Plastic Push-to-Connect Fittings. Fluid Transfer Specialists Newloc Acetal Plastic Push-to-Connect Fittings Fluid Transfer Specialists Newloc Acetal Extremely easy to install no tools necessary Certified by the National Sanitation Foundation (NSF-1 and NSF-1) Instant

More information

EUROPEAN OEM SERVICE STAUFF. STAUFF - Line - Local solutions for individual customers worldwide

EUROPEAN OEM SERVICE STAUFF. STAUFF - Line - Local solutions for individual customers worldwide EUROPEAN OEM SERVICE STAUFF STAUFF - Line - Local solutions for individual customers worldwide STAUFF - Line - Experienced staff and precision machinery enable the manufacture of high-quality hydraulic

More information

PLASTIC, VINYL, RUBBER, SPECIAL MATERIALS

PLASTIC, VINYL, RUBBER, SPECIAL MATERIALS PLASTIC, VINYL, RUBBER, SPECIAL MATERIALS END CAPS, PLUGS, FLANGE PROTECTORS, MOLDED PRODUCTS & EXTRUSIONS. REVATA ENGINEERING W-20, 'S' Block, M.I.D.C., Bhosari, Pune - 411026, India Phone: +91-20-32533825

More information

Style 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description

Style 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard

More information

SKU: BV4262. Industrial PVC-U Screwed BSP Ball Valve

SKU: BV4262. Industrial PVC-U Screwed BSP Ball Valve SKU: BV4262 PVC-U Screwed BSP Ball Valve PVC-U Geschraubt BSP Kugelventil Válvula de bola roscadas BSP PVC- U 1/2" 2" PVC-U Double Union Ball Valve 1/2 " - 2" PVC-U Doppel Union Kugelhahn 1/2" - 2 " Válvula

More information

P.E.D. 97/23/EC/0424 Butterfly Valves Series SL, SLK Group 1-2 Class I, II, III ATEX CE Ex II 2 GD

P.E.D. 97/23/EC/0424 Butterfly Valves Series SL, SLK Group 1-2 Class I, II, III ATEX CE Ex II 2 GD 1. GENERAL 1.1 CONSTRUCTION Small size and light construction gives advantage in installation, stocking and transporting. Sizes from DN 300 to 600 are equipped with ears, which helps the centering of the

More information

BSPP Adapters: Male-to-male adapters have one end machined with a British Standard Pipe Parallel thread and an 80 included angle cone seat.

BSPP Adapters: Male-to-male adapters have one end machined with a British Standard Pipe Parallel thread and an 80 included angle cone seat. dapters/couplings dapters/couplings utoclave Engineers offers a complete line of standard adapters and couplings as well as special designs and materials. dapters: Male/female adapters are designed to

More information

UNIT CONVERSIONS & FORMULAS

UNIT CONVERSIONS & FORMULAS 4, PSI UNIT CONVERSIONS & FORMULAS MEASUREMENT CONVERSION EXAMPLE 1 in. = 25.4 mm 12 in. x 25.4 = 34.8 mm 1 in. =.254 m 12 in. x.254 = 3.5 m LENGTH 1 ft. =.348 m 12 ft. x.348 = 3.68 m 1 mm =.394 in. 1

More information

CUTTER-CRUSHER RAMMER RC 22

CUTTER-CRUSHER RAMMER RC 22 11/99 PARTS MANUAL PMRC22EN.A99 CUTTER-CRUSHER RAMMER RC 22 SERIAL NO. RC22BC0015-UP RC22RC0021-UP TABLE OF CONTENTS 1. Cylinder RC 22.......................................................... 4 2. Hydraulics

More information

Site cleaning equipment

Site cleaning equipment Site cleaning equipment 15 24 DIN Compression pipe couplings stainless steel V4A 1.4571 / AISI 316 TI 352 24 DIN Compression pipe couplings zinc-nickel coating 353 Accessories for hose reels 359 Accessories

More information

INSTRUCTION MANUAL FOR THE MODIFICATION OF EXISTING SYSTEMS DIRECTIVE 95/16/EC

INSTRUCTION MANUAL FOR THE MODIFICATION OF EXISTING SYSTEMS DIRECTIVE 95/16/EC 1 Compiled by: H.L./ G. Galparoli Date: 29/03/99 No.: M.00.003 HYDRONIC LIFT Issue: Rev B 18.12.2006 Changed by: Product code: No of pages: 8 File:PM229GMV-en.doc Approved by: Drawing no: Language: EN

More information

See Figure 1. A = 1 / JIC Tapper B = 1 / JIC Tapper

See Figure 1. A = 1 / JIC Tapper B = 1 / JIC Tapper Instruction Sheet P/N Hose Fittings 1. Fittings for High-Pressure Hose This section has the following fittings: Hose-to-hose connectors Hose-to-hose swivel elbows Straight pipe-to-hose connectors Pipe-to-hose

More information

37 JIC Flare (Nuts) 304C (070112) 306 (070118) 318 (070110) Pg. 22-75-160 Bulkhead Locknut (Use with #2700) Pg. 23 Tube Nut (Use with #319)

37 JIC Flare (Nuts) 304C (070112) 306 (070118) 318 (070110) Pg. 22-75-160 Bulkhead Locknut (Use with #2700) Pg. 23 Tube Nut (Use with #319) 37 JIC Flare (Nuts) Components Assembled The 37 JIC (Joint Industrial Council) Flare is a reliable, straight thread, single-flare design that is used world-wide. It is popular in many applications and

More information

MALE PIPE PART NUMBER 1 PIECE FITTING

MALE PIPE PART NUMBER 1 PIECE FITTING SMOOTH BORE HOSE FITTINGS R5 / R HOSE AND R05 / R44 HOSE FITTINGS Brass 300 Series Stainless Steel FEATURES Swage or Crimp attachment For use with: R5/R (.030 wall hose) R05/R44 (.040 wall hose) Back-up

More information

Pipe Valves, Fittings and Nipples Pressures to 15,200 psi

Pipe Valves, Fittings and Nipples Pressures to 15,200 psi Pipe Valves, Fittings and Nipples MAXIMATOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by

More information

NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE

NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY

More information

VS-GCR Manual Reset Normally Closed Gas Valves

VS-GCR Manual Reset Normally Closed Gas Valves Page 1 of 6 VS-GCR Manual Reset Normally Closed Gas Valves Features: EN 161 Class A, Group European approval 230Vac or 24Vac solenoid coil options Flanged and screwed types Optional Closed Position Indicator

More information

Delta Fire manufacture and supply a comprehensive range of Marine Fire Fighting Equipment.

Delta Fire manufacture and supply a comprehensive range of Marine Fire Fighting Equipment. Marine FIRE FIGHTING Equipment Delta Fire manufacture and supply a comprehensive range of Marine Fire Fighting Equipment. The recent aquisition of the Foundrite range of international couplings, fittings

More information

600, 630. Diaphragm Valve, Plastic

600, 630. Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction The /630 pneumatically operated 2/2-way valves have a low maintenance piston actuator which can be controlled by inert gaseous media. They have an integral optical

More information

SPERRYN GAS CONTROLS DELTA FLUID PRODUCTS LIMITED

SPERRYN GAS CONTROLS DELTA FLUID PRODUCTS LIMITED SPERRYN GAS CONTROLS DELTA FLUID PRODUCTS LIMITED Domestic and Non-Domestic Meter Regulators G940/G941 - Domestic Meter Regulator Domestic regulator offering high performance in a compact unit. Sizes:

More information

Flow Control Valves. Note: Also see R04C3 on page DC1. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US

Flow Control Valves. Note: Also see R04C3 on page DC1. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US Catalog HY15-352/US Contents Control SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI NEED VALVES J2A2... C8-2... Needle Valve, Cartridge Type...45/12... 42/6... 5-6 NVH81... C8-2... Needle

More information

Hydraulic cylinders Tie rod design. Type CD70 / CG70. Contents. Features. RE 17016 Edition: 2014-03 Replaces: 08.08

Hydraulic cylinders Tie rod design. Type CD70 / CG70. Contents. Features. RE 17016 Edition: 2014-03 Replaces: 08.08 Hydraulic cylinders Tie rod design Type CD / CG RE 1 Edition: 2014-03 Replaces: 08.08 Series Component series 1X Nominal pressure bar [7 MPa] Features Contents types of mounting Piston Ø (ØAL)... mm Piston

More information

Vickers. Check Valves. Check Valves. Inline, right angle, manifold mounted, and pilot operated designs. Released 9/93

Vickers. Check Valves. Check Valves. Inline, right angle, manifold mounted, and pilot operated designs. Released 9/93 Vickers Check Valves Check Valves Inline, right angle, manifold mounted, and pilot operated designs Released 9/93 645 Introduction Vickers inline, right-angle, and manifold mounted check valves are direct

More information

Hydraulic Compressor Module

Hydraulic Compressor Module Down Force Circuit 3/8 PTC Ports Hydraulic Compressor Module (Top 2 Shown With Plugs) Lift Force Circuit Tank Drain (Pull Cord) 10 Gallon Air Tank Down Pressure Gauge Lift Pressure Gauge 3/8 Quick-Connect

More information

Groeneveld Parts Book. Groeneveld CPL Systems Canada

Groeneveld Parts Book. Groeneveld CPL Systems Canada 2012 Groeneveld Parts Book Groeneveld CPL Systems Canada 2 CST Item List EP-0 Systems F000222 Coupling Connector 3/16, (200/box) 307-5 F000223 Coupling Connector, 5/16 307-3 F000242 Injector #9 F100484

More information

Tartalom Jegyzék. Kép / Image Sz. / No. Termék Csoport / Product Groups Oldal / Page

Tartalom Jegyzék. Kép / Image Sz. / No. Termék Csoport / Product Groups Oldal / Page Tartalom Jegyzék Kép / Image Sz. / No. Termék Csoport / Product Groups Oldal / Page Teszt Pont Nyomásmérő Csatlakozó / Test Point Gauge Connectors MAS Nyomásmérő Csatlakozó / Test Point Gauge Connectors

More information

High Pressure Equipment High Pressure Valves, Fittings and Tubing

High Pressure Equipment High Pressure Valves, Fittings and Tubing igh quipment igh Valves, ittings and Tubing 0,000, 40,000 and psi service igh quipment Company has developed a line of igh products to assure safe and easy plumbing for 0,000, 40,000 and psi. These needle

More information

High Pressure Equipment Medium Pressure Valves, Fittings and Tubing

High Pressure Equipment Medium Pressure Valves, Fittings and Tubing igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle

More information

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½ to 12 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

Plastic tube flowmeters Series PT/PS

Plastic tube flowmeters Series PT/PS Plastic tube flowmeters Variable area flowmeter for liquids and gases Low cost, excellent readability and light weight Simple installation (flanged, threaded or socket ends for solvent or fusion welding

More information

Direct solenoid and solenoid pilot operated valves

Direct solenoid and solenoid pilot operated valves Direct solenoid and solenoid pilot operated valves Individual mounting Series inline Manifold mounting 5 stacking sub-base non plug-in 100 Manual operator 00 Sealed solenoid enclosure Armature 55 56 57

More information

Product catalogue, tank cleaning systems

Product catalogue, tank cleaning systems Product catalogue, tank cleaning systems Aquamat Tank cleaning units Aquarex Tank cleaning systems www.hammelmann.com Contents (Navigation via Bookmarks) Tank cleaning units L XL XXL High pressure lance

More information

Flanged Type Thermowell

Flanged Type Thermowell Flanged Type Thermowell General Description Flanged type thermowells are precision components manufactured to the highest standard from bar or forgings to serve as protective devices for primary sensing

More information

VALVES FOR REFRIGERATING SYSTEMS

VALVES FOR REFRIGERATING SYSTEMS VALVES FOR REFRIGERATING SYSTEMS FROM QUALITY OUR NATURAL DEVELOPMENT Achieved the goal of fi fty years working in the industry of Refrigeration and Air Conditioning, Castel Quality Range of Products is

More information

Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62

Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62 1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62 Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80,

More information