Cavity Fixings. Cavity fixings. HM metal cavity fixing 3 K/KD/KDH/KM cavity and spring toggles 5 PD board fixings 8 PDM/PDN board fixings 10

Transcription

1

2 Cavity fixings metal cavity fixing 3 K/KD/KDH/KM cavity and spring toggles PD board fixings 8 PDM/PDN board fixings 10 2

3 Metal cavity fixing The versatile metal cavity fixing with metric screws Curtain rails Shelves BUILDING MATERIALS Gypsum plasterboard and gypsum fibreboards Cavity floor slabs Light building boards made of wood wool Chipboard Plywood ADVANTAGES APPLICATIONS FUNCTIONING Due to the extensive product range, the is suitable for board building materials with a thickness of 3-0mm making it suitable for a number of different applications. The metric internal thread allows the attachment to be removed and refitted several times. The s expanding arms open to create a large surface area which can support a high load-bearing capacity. The claws around the neck of the fixing penetrate the board building material and prevent it from rotating whilst being installed. Pictures Lighting Shelves Towel rails Mirror cabinets Curtain rails TV consoles Sub-structures The metal cavity fixing is suitable for pre-positioned installation. To achieve the very best expansion in the cavity the fixing should be selected based on the thickness of the board building material. During installation, the arms expand open and press onto the reverse side of the board. It is recommended that the installation tool be used to install the fixings If using a battery operated screwdriver or screwdriver for installation, the pre-assembled screws must be removed first. The item for attachment should then be placed over the pre-installed shell of the fixing, install the screws and expand the fixing. This reduces the chance of the fixing 2 INSTALLATION 3

4 Metal cavity fixing -S with metric screw -SS with hexagon headed screw -H with angle hook Drill hole diameter Min. drill hole Anchor length Screw Max. panel Max. fixture Sales unit Items to order only depth thickness thickness d o h 1 l d s x l s d p t fix Item Art.-No. [mm] [mm] [mm] [mm] [mm] [mm] [pcs] 4 x 32 S M 4 x x 46 S M 4 x x 9 S M 4 x x 37 S M x x 2 S M x x 6 S M x x 37 S M 6 x x 2 S M 6 x x 6 S M 6 x x 80 S M 6 x x SS ) 12 6 M 8 x x 32 H x 6 H ) with hexagon headed screw, assembly only by using the professional installation tool Z 1 ACCESSORIES Z 1 - the professional installation tool Z 3 - the DIY installation tool Sales unit Item Art.-No. [pcs] Z Z LOADS Metal cavity fixing Highest recommended loads 1) for a single anchor. The given loads are valid for machine screws with the specified thread size. Type 4 x 32 S 4 x 46 S x 37 S x 2 S x 6 S 6 x 37 S 6 x 2 S 6 x 6 S Thread size [M] M4 M4 M M M M6 M6 M6 M8 Recommended loads in the respective base material F rec 8 x SS Gypsum plasterboard 9, mm [kn] 0,1 0,1 0,1 0,1-0, Gypsum plasterboard 12, mm [kn] 0,20 0,20 0,20 0,20-0,20 0,20-0,20 Gypsum plasterboard 19 mm (2 x 9, mm) [kn] , ,2-0,2 Gypsum plasterboard 2 mm (2 x 12, mm) [kn] , ,30 - Chipboard 10 mm [kn] 0,2 0,2 0,2 0,2-0,2 0,2-0,2 Chipboard 13 mm [kn] 0,2 0,2 0,2 0,2-0,2 0,2-0,2 Chipboard 28 mm [kn] , ,0 - Plywood 4 mm [kn] 0, Hardboard 3 mm [kn] 0, Wood wool slab 16 mm [kn] - 0,0-0, ,0-0,0 Wood wool slab 2 mm [kn] , ,0 - Fibre cement board 8 mm [kn] 0,2 0,2 0,2 0,2-0, Gypsum fibreboard 10 mm [kn] 0,2 0,2 0,2 0,2-0,2 0,2-0,2 Gypsum fibreboard 1 mm [kn] - 0,2 0,2 0,2-0,2 0,2-0,2 1) Includes the safety factor 3. Valid for tensile load, shear load and oblique load under any angle. 4

5 K/KD/KDH/KM Cavity & spring toggle The cavity fixing for different board thicknesses and large usage lengths Ceiling lamps Wash basins BUILDING MATERIALS CHARACTERISTICS Gypsum plasterboard and gypsum fibreboards Cavity floor slabs made from bricks and concrete Chipboard Plywood ADVANTAGES APPLICATIONS FUNCTIONING The long metric screw in the toggle fixings KD and KDH allows it to be used in different board thicknesses and attachment thicknesses offering maximum flexibility. The integrated spring of the KD 3+4 and KDH 3+4automatically expands the toggle for a simple installation. The wide transition beams ensure a good load distribution. This achieves a high load-bearing capacity. The nylon gravity toggle K4 allows for the use of standard wood and chipboard screws. Pictures Lighting Light shelves Towel rails Mirror cabinets Light cabinets Wash basins and urinals (KM 10) The KD/KDH /6/8 gravity toggles and KD/KDH 3/4 spring toggle are suitable for pre-positioned installation. When pushed through the drill hole the spring toggle expands by force behind the board. When the gravity toggle is pushed through the drill hole the cross-piece tilts back on its self behind the board. The KM 10 is specially suited to fixing wash basins and urinals in to cavity walls. No special installation tools required Please note that the KD -8, KDH to 8 and KM10 cannot be installed pointing downwards i.e. floor INSTALLATION

6 K/KD/KDH/KM Cavity & spring toggle Item to order only Nylon toggle K 4 Drill hole diameter Max. panel thickness Min. cavity depth Anchor length Thread Sales unit d o d p a l Ø x length Item Art.-No. [mm] [mm] [mm] [mm] [mm] [pcs] K woodscrew 4mm 2 Spring toggle KD Spring toggle KDH Items to order only Drill hole diameter Max. panel thickness Min. cavity depth Anchor length Thread Sales unit d o d p a l Ø x length Item Art.-No. [mm] [mm] [mm] [mm] [mm] [pcs] KD M 3 x 90 0 KDH M 3 x 80 2 KD 3 B M 3 x KD M 4 x KDH M 4 x 70 2 KD 4 B M 4 x Gravity toggle KD Gravity toggle KDH Items to order only Drill hole diameter Max. panel thickness Min. cavity depth Anchor length Thread Sales unit d o d p a l Ø x length Item Art.-No. [mm] [mm] [mm] [mm] [mm] [pcs] KD M x KDH M x KD M 6 x KDH M 6 x KD M 8 x KDH M 8 x

7 K/KD/KDH/KM Cavity & spring toggle Gravity toggle KM 10 Drill hole diameter Max. panel thickness Min. cavity depth Anchor length Screw Sales unit Item to order only d o d p a l d s x l s Item Art.-No. [mm] [mm] [mm] [mm] [mm] [pcs] KM M 10 x LOADS Toggle fixing KD Highest recommended loads 1) for a single anchor. Type KD3 KD4 KD KD6 KD8 KDH3 KDH4 KDH KDH6 KDH8 Thread size [M] M3 M4 M M6 M8 M3 M4 M M8 M10 Recommended loads in the respective base material F rec Max. possible recommended load 3) [kn] 0,3 0,0 1,0 1,90 3,20 0,0 0,10 0,17 0,32 1,00 Gypsum plasterboard 12, mm [kn] 0,0 0,10 0,1 0,20 0,2 0,0 0,10 0,1 0,20 0,2 Chipboard 1 mm [kn] 0,3 0,40 0,40 0,0 0, chipboard 22 mm [kn] ,80 1, ) Includes the safety factor 4. 3) If the failure of the base material is not possible. Valid for tensile load, shear load and oblique load under any angle. 7

8 PD Board fixing The expansion plug for fixings in gypsum plasterboard, gypsum fibreboard and wooden panels Towel rails Small shelves BUILDING MATERIALS CHARACTERISTICS Gypsum plasterboard and gypsum fibreboards Wooden boards MDF boards Multiplex boards OSB boards Plywood boards Chipboard Wood core plywood boards ADVANTAGES APPLICATIONS FUNCTIONING The operating principle of the fixing allows for use in various board thicknesses including in low cavity depths. This provides great flexibility. The special fixing geometry with a nylon cone ensures a high tightening torque that can be identified immediately. This offers a high level of installation safety. The longitudinal ribs prevent the fixing from rotating in the drill hole, thus allowing for a reliable installation. Pictures Lighting Shelves Towel rails Mirror cabinets Curtain rails The board fixing PD is suitable for pre-positioned installation. Use rotary drilling to create the drill hole. When the screw is tightened, the plastic cone is pulled into the sleeve and expands the fixing. Use full-thread screws, or alternatively, the part of the screw without thread may not be longer than the thickness of the item being attached. Must be used with chipboard screws. Do not use screws with double-start threads. INSTALLATION 8

9 PD Board fixing Board fixing PD Board fixing PD S - with chipboard screw Items to order only Drill hole diameter Min. drill hole depth Min. panel thickness Anchor length Chipboard screw Max. fixture thickness Sales unit d o h 1 d p l d s / d s x l s t fix Item Art.-No. [mm] [mm] [mm] [mm] [mm] [mm] [pcs] PD PD PD PD 8 S ) x PD 10 S ) x PD 12 S ) x ) PD-S with chipboard screw. LOADS Board fixing PD Highest recommended loads 1) for a single anchor. The given loads are valid for chipboard screws with the specified diameter. Type PD 8 PD 10 PD 12 Chipboard screw Ø [mm] 4 6 Recommended loads in the respective base material F rec Gypsum plasterboard 9, mm [kn] 0,10 0,10 0,10 Gypsum plasterboard 12, mm [kn] 0,10 0,10 0,1 Gypsum plasterboard 2 x 12, mm [kn] 0,1 0,1 0,1 Gypsum fibreboard 12, mm [kn] 0,20 0,2 0,30 Plywood [kn] 0,1 0,40 0,80 Chipboard 16 mm [kn] 0,2 0,2 0,2 1) Required safety factors are considered. Valid for tensile load, shear load and oblique load under any angle. 9

10 PDM /PDN Board fixing The self-tapping metal and nylon fixings for gypsum plasterboard and gypsum fibreboard Wall lamps Speaker cabinets ADVANTAGES The PDM / PDN can be used in gypsum plasterboard and gypsum fibreboard. The sharp, self-tapping thread gives a secure, positive fixing. This achieves a high load-bearing capacity. The cross-drive recess means that a standard screwdriver or bit can be used. No special setting tool is required. The short fixing length means that only a small amount of space is required behind the board. INSTALLATION BUILDING MATERIALS Gypsum fibreboard Gypsum plasterboard APPLICATIONS Pictures Lighting Electrical installations Fitting accessories FUNCTIONING The PDM and PDN are suitable for pre-positioned installation. The self-drilling fixings screw into the plasterboard with a positive fit. Flush installation in board materials. Overtightening the fixing should be avoided. Therefore the installation torque should be limited when using a battery operated screwdriver. Adapted for wood, selftapping and chipboard screws of4.0mm Pre-drill with a Ø 8mm drill bit when using gypsum fibreboard and double-planked gypsum plasterboard. Not suitable for tiled plasterboard. Plasterboard fixing metal PDM Plasterboard fixing nylon PDN Anchor length Min. thickness to first supporting layer Screw Sales unit l t d s x l s Item Art.-No. [mm] [mm] [mm] [pcs] PDM 100 1) ,2 x PDN 100 1) ,2 x ) Supplied with plasterboard screws with pan head. LOADS Plasterboard fixing metal PDM 100 Highest recommended loads 1) for a single anchor Nrec [kn]. Type PDM 100 Screw Ø [mm] 4,0 Recommended loads in the respective base material F rec Gypsum plasterboard 9, mm [kn] 0,07 Gypsum plasterboard 12, mm [kn] 0,08 Gypsum plasterboard 2 x 12, mm [kn] 0,11 1) Required safety factors are considered. Valid for tensile load, shear load and oblique load under any angle. 10

11 Decisive factors Technical disclaimer / Decisive factors Due to the complexity of building materials, tools, fixing elements and installation techniques a comprehensive recommendation depends on full and detailed understanding of specific site conditions. This document is a factual record of anchor performance obtained under specific conditions and does not constitute an endorsement of the suitability of the product for any specific application. This responsibility remains with the customer. The data given shall beused as a guide for assessment or anchor suitability. Even when our advice is given in good faith it cannot be binding for this reason and we cannot accept any liability for any anchor failure due to the wrong design, misuse or wrong installation. For safety critical applications only anchors with an ETA or Zulassung German Approval shall be used. For further product information please contact the fischer Technical Department: Phone: technical@fischer.co.uk fischer fixings (UK) Ltd. Whitely Road, Wallingford, Oxon, OX10 9AT. We cannot be responsible for any errors, and we reserve the right to make technical and range modifications without notice. No liability is accepted for printing errors and omissions. General Notice The information in this brochure is intended for general guidance only and is given without engagement. Additional information and advice on specific applications is available from our Technical Support Team. For this however, we require a precise description of your particular application. All the data in this brochure concerning work with our fixings must be adapted to suit local conditions and the type of materials in use. If no detailed performance specifications are given for certain articles and types, please contact our Technical Service Department for advice. Phone: technical@fischer.co.uk 11

12 01/2013 Contacts fischer fixings UK Ltd. Whitely Road Oxon OX10 9AT Wallingford Great Britain Phone (0044) Fax (0044) Your dealer: Technical Service If you need any assistance, simply contact your local fischer representative. For more specialised application problems please contact our Technical Services Team. fischer fixings UK Ltd. Wallingford, Oxon, OX10 9AT. Phone Technical Training We also offer training seminars suited to your individual needs and requirements. Please call the number above to find out more Cavity fixings / of 12 Product sections / 01/2013 (V1) Printed in the UK