ACRYLAC -MGA THE PREMIER LEAGUE OF FOOD PACKAGING COATINGS. Safety First

Transcription

1 THE PREMIER LEAGUE OF FOOD PACKAGING COATINGS Safety First

2 QUALITY GUARANTEED TEN GOOD REASONS TO GO FOR : THE UNIQUE MGA QUALITY GUARANTEE! 01 We use only evaluated and approved components 02 Our SAP enterprise software rules out raw material mix-ups 03 Purity of the raw materials is guaranteed by suppliers certificates and own in-house measurements 04 Contamination-free production thanks to a completely separate production site 05 Quality control: analysis of the low-migration characteristic in every production run 06 Batch tracing along the entire production chain, right back to the raw materials 07 MGA pioneer since 2004 the world s first manufacturer of a low-migration system with GMP-compliant production 08 Continuous basic and advanced training of our employees in the subject of food packaging 09 Own in-house analysis and continuous, ongoing testing by recognised laboratories 10 Statement of guarantee for MGA for the manufacture of food-friendly packaging that conforms with the relevant legislation

3 ACRYLAC ACRYLAC -MGA SAFE TO SAY - THE FAVOURITE ALWAYS BE ON THE SAFE SIDE WHEN IT COMES TO FOOD PACKAGING! To protect food packaging against the knocks of everyday use, we have developed special water-based coatings our series all of which are world-class players that master every packaging discipline with flying colours. After all, we re talking about consumers health! Prints coated with stay well below statutory limits. The entire production process of our overprint coatings applied inline to paper and board substrates complies with GMP guidelines, often allowing you to refrain from performing expensive and complex quality control. We guarantee that these low-migration and low-odour coatings are free from undesirable substances and therefore ideal for using on the packaging of organoleptically sensitive foodstuffs. Food packages printed with our are guaranteed to protect consumers safety and are without any doubt healthier for them. To make it easier for you to find the right product for your needs, we have simplified and standardised our highly diversified product range. By doing so, we have put together a strong team that is perfectly set up to cover all areas of the field. With on your side, you ll always be in the premier league of food packaging printers.

4 GLOSS Our GLOSS series is a team of diverse talents that glows both when producing single- and double-sided prints. From the perfect all-rounder providing gloss and protection on paper and board to an absolute specialist for that ultra-gloss effect, this finely co-ordinated team offers you the right coating for practically every application. GLOSS Universal protective and glossy coating HIGH GLOSS ETRA Extra-high gloss GLOSS S Gloss and protection HIGH GLOSS S High gloss and quick drying HIGH GLOSS ETRA S Extra-high-gloss coating with a wide range of applications FOR MORE DETAILS, PLEASE REFER TO OUR MATT AND GLOSS USER GUIDE.

5 MATT Our MATT series lets you shine even when the finish is matt. From a neutral gloss to a high matt effect, you can obtain practically all levels of mattness while guaranteeing outstanding protection to match the degree of matt finish. SILK MATT Reduced gloss for an inconspicuous yet effective protective coating SEMI MATT Semi-matt effect offering a fine appearance and very good protection MATT Uniform matt effect with good surface quality MATT ETRA Universal matt coating with a very good matt effect FOR MORE DETAILS, PLEASE REFER TO OUR MATT AND GLOSS USER GUIDE.

6 SPECIAL Our SPECIAL team is a select outfit of highly efficient specialists that enable you to master even special print jobs without any problem. They are the leading players when it comes to maximum stackability, reduced curling, non-absorbent substrates and excellent rub resistance. ANTIBLOCK Excellent drying and stackability for critical applications, too (matt version available on request) BLOCKING RESISTANCE FOIL Optimum, crazing-free drying on foils and non-absorbent substrates (matt version available on request) FILM ANTICURL Greatly reduced curling tendency with light-weight papers (matt and highgloss versions for single-sided printing available on request) ANTI-CURLING PROPERTY RUB ETRA For maximum rub resistance (matt version available on request) MATT Gloss* = Does not apply to matt version FOR MORE DETAILS, PLEASE REFER TO OUR SPECIAL USER GUIDE.

7 SPECIAL SPECIAL coatings are ideally suitable for film lamination, UV lacquering, particularly low-friction or particularly antislip surfaces. What s more, they provide exceptional heat resistance properties. PRIMER Optimum adhesion for post-finishing with UV lacquer or film lamination also suitable for spot coating with UV lacquer (matt version available on request) SUITABILITY FOR FINISHING ANTISLIP Reduced surface smoothness with distinct antislip effect GLOSS SURFACE SMOOTHNESS HIGH SLIP High surface quality for intensive mechanical processes, such as edging and thermoforming SURFACE SMOOTHNESS HEATRESIST Excellent heat resistance, far beyond that offered by standard water-based coatings (matt version available on request) HEAT RESISTANCE FOR MORE DETAILS, PLEASE REFER TO OUR SPECIAL USER GUIDE.

8 YOUR PARTNER FOR FOOD PACKAGING We have trained long and hard to achieve our top podium position in the offset and packaging inks segments, and have broken our own records over and over again. The company has been in the race for over 240 years and is renowned the whole world over for its innovative solutions and services. OUR SUPPORT SERVICES Application consulting specific to field and requirements Optimising your press parameters for consistently good print results Non-proprietary consulting on pressure configurations Packaging consulting, e.g. with respect to conformity or finishing Team-oriented collaboration to find solutions fast Modular mixing system for maximum flexibility Basic and advanced training by the INK ACADEMY Good manufacturing practice (GMP) consulting Product safety / REACH consulting Analysis You can f ind more information at: MA 267 E printed with!nkredible REFLECTA and ACRYLAC HIGH GLOSS ULTRA S 57 G 1600 and ACRYLAC MATT ETRA 57 M 2300