User Manual (JUNIOR CARSEAT) Product name

Size: px

Start display at page:

Download "User Manual (JUNIOR CARSEAT) Product name"

Jasmine Charleen Ross
7 years ago
Views:

1 User Manual Warranty is attached We really would like to thank you for purchasing our infant safety seat. For your safety, the user manual should be read before using the product, and the product should be applied accordingly. The user manual needs to be kept well, allowing you to read it when necessary. Product name Infant protection device for a car (JUNIOR CARSEAT)

2 This product is the child safety device to decrease the impact of the child caused by traffic accidents, etc. You must take care of it when you drive so as not to cause any car accident. 1. Child application for use This device is prohibited, if the childs are not in proper conditions as belows. If using the seat back (For infant and child, 3~10 years) Weight: 15~36 kg Height: 96~145 cm If not using the seat back (For infant and child, 4~10 years) Weight: 15~36 kg Height: 101~145 cm 2. Installing the junior car seat This device can be installed on the front or the rear automotive seat. Daiichi recommends that this child safety device will be installed on the rear automotive seat which has high safety. Warning Do not use it on the vehicle seat with air bag. Death or serious injury can occur by the operating of the airbag. Picture1 This device must be installed by the front-facing.

3 Picture1 You must install this child safety device only inside the car fixed with 3 points safety belt. 3. Product composition (If it is manufactured with body only, the product is composed of body and body seat.) Hook Body Main frame Head restraint Seat back

4 4. Adjusting the inclination The inclination of the seat back can be easily adjusted, as it moves freely. setting the seat back completely vertically Notice Avoid or horizontally. 5. Adjusting the head restraint You must install this child safety device only inside the car fixed with 3 points safety belt. 5 levels. The head restraint can be adjusted up to all 5 levels. Notice Be sure to confirm that it is locked by listening for the clicking sound after adjusting. Reference The correct position of the head restraint

5 6. Equipment (If using the seat back) Have a child in the car seat so that the back of the child is resting on the seat well. Notice Be sure to check the height of the head restraint at this time.(please refer to the head restraint section.) Pull the car seat-belt, and then adjust so that the belt in horizontal direction passes under the lower part of the car seat armrest. Pull the belt of the shoulder part diagonally so that it passes through the hook part of the head restraint. Then insert it into the buckle. Notice Be sure to check that the car seat-belt is not twisted The belt for the shoulder part must pass over the upper side of the child s shoulder, and the belt in the horizontal direction must pass over the lower part of the child s belly. Check point Confirm the proper height of the head restraint. The car fixing plate and the seatbelt buckle must be fixed. Ensure that the car seatbelt is not twisted. After checking, if the main frame of the car seat can be moved more than 3 cm in any direction, please install it again according to No. 1~3.

6 7. Equipment (If not using the seat back) Have a child sit in the junior seat after putting the safety seat on the car seat. Confirm that the lower part of the child s belly is resting on the seat well. Pull the car seat-belt, and then adjust so that the seat-belt in the horizontal direction passes under the lower part of the car seat armrest. Pull the belt of the shoulder part diagonally so that it can pass through the hook part of the head restraint. Then insert it into the buckle. Notice Ensure that the car seat-belt is not twisted The belt of the shoulder part must pass over the upper side of the child s shoulder, and the belt in the horizontal direction must pass over the lower part of the child s belly. Check point The car fixing plate and the car seat-beat must be fixed. The car seat-belt is not twisted. After checking, if the main frame of the car seat can be moved by more than 3 cm in any direction, please install it again according to No. 1~3.

7 8. Laundry and Management 1) Laundry methods As seat covers on head restraint and seat back are made of Velcro, they can be easily detached or put together. Wash the head restraint, the seat back, and the seat cover of the body in tepid water. (Please be sure to wash it by hand.) Avoid dehydration, and after removing the moisture by drying with a towel, etc., dry it in the airy shade. Polish the plastic parts by using water or dry cloth, etc. Please vacuum up dust, etc. Notice Do not use chlorine bleach. Notice Do not iron. 2) Management Clean all stains caused by food, etc. every time. Do not use gasoline or thinner, as these might cause a mark on the surface of the seat and the plastic. Hand washing Chlorine Dry cleaning Lay down

8 9. Caution Fix the junior safety device according to the instruction manual. If the seat is not fixed securely, the child will be exposed to the risk of death or injury in the event of crash or sudden braking. A guardian must always be present when the child is in the car. Do not allow the child to be in the car alone. A child is particularly at risk during high temperatures in the summer. The device must be equipped with the other car seat if the kinds and forms of the car seat-belt do not follow the instruction manual. If the instruction manual is not followed, the child will be exposed to the risk of death or injury in the event of a crash or sudden braking. Metal and plastic parts of the safety seat might become hot if exposed to direct sunlight. Only place the child in the seat after confirming the child will not be burned, and be sure to park the car in the shade and cover the seat with a towel on days of strong sun rays in the summer. Do not reuse the safety seat if you experience a traffic accident or strong impact, even if there are no apparent external damages, as this may cause the risk of death or injury. Do not use this device in an automotive seat equipped with airbag. The child can be injured by the operation of the airbag. Do not remodel or manipulate the safety chair beyond the items mentioned. If the safety seat is installed in the passenger seat, it may interfere with the gear or the side brake. If interference occurs, install the seat on the rear automotive seat. Do not manipulate the safety belt when driving. Park the car in a safe place so it can be handled properly. If you manipulate it while driving, it may interfere with car driving and cause an accident. When the safety seat is not being used, put it in the trunk or be sure to fix it to the automotive seat belt. If not, it may be moved or bumped into, causing interference when driving. An emergency exit is needed. Do not install the child safety seat on the passenger seat in the car of 2 or 3 door usually sitted by a person in the back of the car, or in the second seat of 1 box car. Ensure that the child does not stand on the safety seat, or use it as a toy. Be sure to confirm that it is intalled safely if you are going to be driving on bumpy road, and check for trouble during or after driving. (When you check it, the automobile must be stopped and secured.) If you install the safety seat in the front position, please make sure that it does nto obscure the door mirror and the rear field of vision. Do not install or remove the safety chair if the child sits on it. The safety device must be securely fixed before the child is seated. If it is not properly fixed, it might pop out in a crash causing injury to the passenger. Adjust the junior seat-belt to fix the child properly with it, if it is provided. Avoid damaging the belts with sharp objects, as this will compromise safety. If belts become damaged, please contact the store where you purchased this product. Daiichi recommends that you install the safety device in the rear seat rather than the front seat.

9 74-5, Yadang-ri, Gyoha-eup, Paju-si, Gyeonggi-do Customer service office: Service hours: Monday-Friday AM 9:00-18:00 Saturday PM09:00-13:00 Homepage: * This product is manufactured elaborately. If you find a problem with it, please contact the customer service office. * The product s specification can be altered for improvement of performance without a notification in advance.

Just-Like-Mine! Doll or Stuffed Toy. Car Seat. Instruction Manual. These instructions are for the following Joovy Style # s: 002, 003

Just-Like-Mine! Doll or Stuffed Toy Car Seat Instruction Manual These instructions are for the following Joovy Style # s: 002, 003 Please read this instruction manual completely before using your doll