No Description Specification Remarks Machines used in South Africa. For cutting various sheet metal components

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "No Description Specification Remarks Machines used in South Africa. For cutting various sheet metal components"

Transcription

1 No Description Specification Remarks Machines used in South Africa 1. Laser Cutting Be able to cut Aluminium sheet up to 4mm thick For cutting various sheet metal components AMADA 4 kw 10m x 3m bed 2. Steel fabrication and welding AWS D 1.1 Certified welders Manufacturing of welded steel and aluminium structures and small components that might need machining 3. Plate metal fabrications aluminium Be able to process Aluminium sheet up to 4mm thick Certified welders 4. CNC Bending machine Be able to bend Aluminium sheet up to 4mm thick accurately For bending various sheet metal components AMADA RG CNC Sheet metal punching machine Be able to process Aluminium sheet up to 2mm thick AMADA Pega CNC and Conventional Milling Machine Number of Axis = 3, Linear Accuracy 0,02 mm, Travel mm To machine various components MAZAK CNC travel: x-1000mm y-500mm z- 550mm 7. CNC and Linear and diametrical accuracy 0,02 mm, To machine various components MAZAK CNC Lathe y-350mm z-600mm Conventional Lathe Travel 1000mm and diameter up to 200mm 8. CNC wire cutting (wire erosion) Linear accuracy 0,02 mm For precision antenna parts CNC travel: x-450mm y-350mm z-300mm 9. Surface treatment Chemical Conversion Coating and Anodising (Aluminium Components); Zinc Corrosion protection on various components

2 Plate and Passivation for steel components Axis CNC Router Linear Accuracy 0,5 mm, For routing insulation and composite parts Multicam travel 4m x 1.5m 11. Paint Facility Normal Automotive spray booth For painting the system, sub systems and components 12. Composite Material Tooling and mould design. Part Radar antenna housings manufacture. Autoclave and ovens for curing. Pre-preg and wet lay-up Assembly 13. Plastic Injection Moulding Tooling and mould design. Part manufacture. Radar parts 14. PCB manufacturing facility Ability to manufacture multi-layer PCB's up to 16 layers for digital boards and 4 layers for RF boards. PCB manufacturing 15. ESS (Environmental Stress Screening)facility See RRS spec 16. PCB population and rework facility IPC 610 and J-STD 0001 standardised company with ability to work Ball Grid Array type components Multi-layer PCB assembly and rework Population and rework of PCB's

3 certified 17. Test equipment rental facility Agilent Instruments (Previous HP) Rental of specialised test equipment (Network analyser) 18. Test Equipment calibration supplier Typical the SABS or Protea Instruments type in SA Rhode and Swartz or Agilent, Fluke agency calibration certified company To calibrate test equipment in use during manufacturing 19. Cable manufacturing facility Cabling manufacturing using spec 44 wire or Filotech wire. Able to work heat shrink protection and braiding with back shells fitted onto MIL-C series 3 connectors IPC 620 standardised company Able to perform repair and modification activities Able to source and procure/supply above type cabling requirements Able to perform testing on RF cable assemblies Manufacturing of cables (Electrical and RF types)

4 20. High quality tool supplier Typical "SNAP ON" or "BETA" tools Light industrial tool supplier to aircraft or motor industry able to supply special tools form SNAP ON and DANIELS Crimping tools. For maintenance and supply of small tools 21. Aerial operator Light aircraft operator to light twin aircraft type Used during flight trials for final client acceptance RSAF to perform the flight trials. If NO then light twin turbo charged engine non pressurised type i.e. PA 34 Seneca or B55 Baron 22. Freight Forwarding and Clearing facility International well established clearing company with good customs relations Freight Forwarder able to handle and clear controlled items Freight Forwarder able to transport equipment to and from airport To clear inbound and outbound goods during manufacturing 23. Mobile Crane hire facility Crane and forklift hire company Mobile 3 ton crane mounted on truck or 3 ton Forklift with extended forks To load and move goods during shipping and trials

5 24. Electrical engineering consultants typical electricians in SA To verify electrical safety tests Determine if this is reqéd in KSA? If Yes who can sign off in KSA? 25. Environmental controlled facility for assemblies using epoxy adhesives. Manufacture of aluminium subassemblies

6 Milling: MAZAK CNC travel: x-1000mm y-500mm z-550mm Turning: MAZAK CNC Lathe y-350mm z-600mm Wire Cutting: FANUC CNC travel: x-450mm y-350mm z-300mm 5840-ST-1278V ST-9125V ST-9131V ST-9132V ST-9133V ST-9134V ST-9135V ST-9137V ST-9139V ST-9141V ST-9143V ST-9145V ST-9146V ST-9147V ST-9148V ST-9149V ST-9156V ST-9170V ST-9171V ST-9172V ST-9174V ST-9195V ST-9258V ST-9262V ST-9301V ST-9302V ST-9303V ST-9304V ST-9305V ST-9306V ST-9307V ST-9309V ST-9312V ST-9313V ST-9314V ST-9317V01.00 Cover, Load, (HP) Flange, Wave Guide, Bulkhead Nut, Tilt Adjuster Bush, Nut Rod End, RHT, Tilt Adjuster Rod End, LHT, Tilt Adjuster Spacer, Tilt Adjuster Flange, One Gland Flange, Two Glands Flange, Three Glands Flange, Feed Through Plate, NFM Mounting Interface Flange, Boot, Bottom Ring, Clamp, Screen, Bottom Interface Flange, Boot, Top Ring, Clamp, Screen, Top Insert, Mounting, Services Clevis, Tilt Adjuster Shaft, Tilt Adjuster Bracket, Securing, Clevis Pin, Hinge Cover, Boresight Mount Bracket, Wave Guide Support Insert, Mounting, Antenna Flange, Interface Housing, Rotating Housing, Static Flange, Mounting Wear Ring, Seal Drive Mount, RJ Drive Tube, RJ Mounting Bracket, SPU Mounting Plate, Internal, SPU Enclosure, Modified, SPU, AC DIN Rail, SPU, AC Mounting Plate, Internal, SPU

7 5840-ST-9318V ST-9319V ST-9320V ST-9455V ST-9502V ST-9507V ST-9558V ST-1239V ST-9562V01.00 Enclosure, Modified, SPU, ETH DIN Rail, SPU, ETH Bracket, FC D-Shape Adapter Base, PA Base Plate, PSU DIN Rail PSU Plate, Drive Base FEED 12 WAY FABRICATED DIN Rail, DEU Laser cutting: AMADA 4 kw 10m x 3m bed Bending: NC bending brake AMADA RG-80 Punching: CNC AMADA Pega ST-9164V ST-9181V ST-9182V ST-9184V ST-9503V ST-9508V ST-9513V ST-9559V01.00 Louvre Mount, Fan Box, Filter Plate, Baffle Shield, EMI, PSU Mounting Bracket Fan Mounting Tray Plate, Fan Bracket Milling: LEADWELL V42 CNC travel x-1000mm y-520 z-500 Milling: LEADWELL V60I CNC travel x-1520mm y-760mm z- 610mm Milling: FANUC CNC travel x-300mm y-300mm z-330mm 5840-ST-1128V HC-1032V ST-1277V ST-1234V ST-1235V ST-1261V ST-1260V ST-9451V ST-9557V ST-9194V ST-9165V01.00 BANDPASS FILTER TX/RX PLUG, ANTENNA HOUSING, LOAD (HP) BASE S-BEND, MACHINED COVER, S-BEND, MACHINED COUPLER, DIRECTIONAL, BOTTOM COUPLER, DIRECTIONAL, TOP HEATSINK, PA HEAT SINK, RDR MOUNT, BORESIGHT MOUNTING PLATE, ROTATOR

8 5840-ST-9162V ST-9163V ST-9522V ST-9523V01.00 HATCH, ENCLOSURE HATCH, COMMS FIN SPACER

RJF TV ROHS COMPLIANT N & BZ. Amphenol. Ethernet connection system for harsh environment. Part number code

RJF TV ROHS COMPLIANT N & BZ. Amphenol. Ethernet connection system for harsh environment. Part number code Ethernet connection system for harsh environment ROHS COMPLIANT N & BZ RJFTV allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT, 100 BaseTx or 1000 BaseT networks in harsh environments.

More information

SMA Connectors. RF Coax Connectors. Product Facts

SMA Connectors. RF Coax Connectors. Product Facts SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes

More information

Directory chapter 04

Directory chapter 04 M Directory chapter 04 D-Sub Mixed subminiature D connectors New Page D-Sub mixed connector system general information................... 04.02 Contact arrangements............................................

More information

RJF TV Ethernet connection system for harsh environment

RJF TV Ethernet connection system for harsh environment RJF TV Ethernet connection system for harsh environment ROHS compliant N & BZ RJFTV allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT, 100 BaseTx or 1000 BaseT networks in harsh environments.

More information

LARGE CNC LATHE: DAEWOO TRAVEL: X-AXIS BED SWING IS 28 TRAVEL: Y-AXIS CARRIAGE IS 16 TRAVEL: Z-AXIS IS 156

LARGE CNC LATHE: DAEWOO TRAVEL: X-AXIS BED SWING IS 28 TRAVEL: Y-AXIS CARRIAGE IS 16 TRAVEL: Z-AXIS IS 156 LARGE CNC LATHE: DAEWOO TRAVEL: X-AXIS BED SWING IS 28 TRAVEL: Y-AXIS CARRIAGE IS 16 TRAVEL: Z-AXIS IS 156 LARGE HORIZONTAL BORING MILL: SCHARMANN CAPABLE OF BORING AND MILLING A VARIETY OF PARTS TO YOUR

More information

Mig C280 PRO, Mig C340 PRO. Spare parts list. Edition Valid for serial no. 627-xxx-xxxx, 119-xxx-xxxx,

Mig C280 PRO, Mig C340 PRO. Spare parts list. Edition Valid for serial no. 627-xxx-xxxx, 119-xxx-xxxx, Spare parts list Edition 20120710 Valid for serial no. 627-xxx-xxxx, 119-xxx-xxxx, Ordering no. Product 0349 302 889 Origo Mig C280 PRO 400-415 V, 3~50 Hz 0349 302 844 Origo Mig C280 PRO 230/400-415/415/500V,

More information

Real Time Cost Impact Assessment of Composite and Metallic Design Alternatives. Dr. Christopher Rush Joe Falque Karen McRitchie

Real Time Cost Impact Assessment of Composite and Metallic Design Alternatives. Dr. Christopher Rush Joe Falque Karen McRitchie Real Time Cost Impact Assessment of Composite and Metallic Design Alternatives Dr. Christopher Rush Joe Falque Karen McRitchie Overview Introduction Composite Structures New Challenges Background and Related

More information

MACHINING SPECIALISTS

MACHINING SPECIALISTS MACHINING SPECIALISTS ABOUT US Berendsen Machining Services, a division of Berendsen Fluid Power, has the expertise, equipment and experience to machine a range of components such as flanges, adaptors,

More information

2003 ACCORD - Automatic Transmission Removal

2003 ACCORD - Automatic Transmission Removal 2003 ACCORD - Automatic Transmission Removal Special Tools Required Engine support hanger, A and Reds AAR-T-12566 Engine hanger balancer bar VSB02C000019 Front subframe adapter VSB02C000016 These special

More information

1. Lay out 2 pieces of 7/8" tubing and mark for bending as shown. Remember that the bend is in the shaded area as shown below in Figure 1.

1. Lay out 2 pieces of 7/8 tubing and mark for bending as shown. Remember that the bend is in the shaded area as shown below in Figure 1. MINI BIKE PLANS Page 1 INTRODUCTION Before starting to build your Mini-Bike, be sure that you have all the parts shown on the material list. You will note that tubing has been used in the construction.

More information

Navico-Northstar 2kW JRC Radar Package, Scanner Cable Removal and Replacement

Navico-Northstar 2kW JRC Radar Package, Scanner Cable Removal and Replacement Navico-Northstar 2kW JRC Radar Package, Scanner Cable Removal and Replacement This work instruction describes the methods and means for which to remove and reinstall optional scanner cable configurations

More information

Welding of Plastics. Amit Mukund Joshi. (B.E Mechanical, A.M.I.Prod.E)

Welding of Plastics. Amit Mukund Joshi. (B.E Mechanical, A.M.I.Prod.E) Welding of Plastics Amit Mukund Joshi (B.E Mechanical, A.M.I.Prod.E) Introduction Mechanical fasteners, adhesives, and welding processes can all be employed to form joints between engineering plastics.

More information

metal Fabrication 1966 moyer Ave Box 579 elkhart, in Fax

metal Fabrication 1966 moyer Ave Box 579 elkhart, in Fax Metal Fabrication MOR/ryde Metal Fabrication Overview Since its inception in 1966, MOR/ryde has built a reputation for outstanding customer service in every area of its business. MOR/ryde s Metal Fabrication

More information

3Pallet. Handling Conveyor. No.3of 7. Designed for flexibility and heavy duty usage - up to 1500kg per pallet

3Pallet. Handling Conveyor. No.3of 7. Designed for flexibility and heavy duty usage - up to 1500kg per pallet 3Pallet No.3of 7 Handling Conveyor Designed for flexibility and heavy duty usage - up to 1500kg per pallet 2 3 4 Belt Conveyor For careful and extremely low noise conveying. 1 Lineshaft Powered Roller

More information

1960 - establishment of TESLA STROPKOV, as an electrotechnical plant of a concern TESLA Investment Electronics 1980 - the plant became independent as

1960 - establishment of TESLA STROPKOV, as an electrotechnical plant of a concern TESLA Investment Electronics 1980 - the plant became independent as History 1960 - establishment of TESLA STROPKOV, as an electrotechnical plant of a concern TESLA Investment Electronics 1980 - the plant became independent as concern company 1991 - change to joint-stock

More information

Connection Technology For Harsh Environments Industrial Ethernet IP 65 / IP 67 Rated

Connection Technology For Harsh Environments Industrial Ethernet IP 65 / IP 67 Rated Connection Technology For Harsh Environments Industrial Ethernet IP 65 / IP 67 Rated CONEC Industrial Ethernet Connectors IP 65 / IP 67 Rated Industrial Ethernet Networks Target: any RJ45 application that

More information

Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability

Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers

More information

LED LEONARDO 120 W. LED Fresnel SPOTLIGHT White light, either Tungsten or Daylight balanced Correlated Color Temperature

LED LEONARDO 120 W. LED Fresnel SPOTLIGHT White light, either Tungsten or Daylight balanced Correlated Color Temperature LED LEONARDO 120 W LED Fresnel SPOTLIGHT White light, either Tungsten or Daylight balanced Correlated Color Temperature OVERVIEW The LED LEONARDO 120W is a highly efficient Fresnel lens spotlight using

More information

9,000lb capacity 4 Post Lift Installation Manual

9,000lb capacity 4 Post Lift Installation Manual 9,000lb capacity 4 Post Lift Installation Manual Parts Checklist 1 Main side track with 9/16 hole on cylinder end complete with cylinder, hose and connector 1 Offside track 2 Cross Rails pre-assembled

More information

DVD-8C Print Reading For Electronics Assembly

DVD-8C Print Reading For Electronics Assembly DVD-8C Print Reading For Electronics Assembly Below is a copy of the narration for DVD-8C. The contents for this script were developed by a review group of industry experts and were based on the best available

More information

ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE

ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE Contains penetrants, lubricants and greases All weather Water-resistant Penetrates like an oil, then cures to a thick, water-resistant grease Recommended

More information

www.cofan-pcb.com with Concurrent Engineering

www.cofan-pcb.com with Concurrent Engineering with Concurrent Engineering Metal Core PCB Fabrication Heat Sinks & Heat Pipes Enclosures (Plastic and Metal Alloys) SMT & Through Hole PCB Assembly Final Integration & Test Services www.cofan-pcb.com

More information

5800 Temperature Sensor Cable Assembly

5800 Temperature Sensor Cable Assembly 5800 Temperature Sensor Cable Assembly Removal and Replacement Instruction Sheet #60-4702-070 Revision D, January 14, 2013 Overview The 5800 has two refrigeration temperature sensors, one attached to the

More information

Rotary Limit Switch RLS2C

Rotary Limit Switch RLS2C Rotary Limit Switch RLS2C The rotary limit switch is used to control the movement of industrial machinery. It operates as an auxiliary controller of electrical motors through a power interface, such as

More information

ALLDATA Online - 2006 Dodge Truck RAM 2500 Truck 2WD L6-5.9L DSL Turbo VI... Service and Repair

ALLDATA Online - 2006 Dodge Truck RAM 2500 Truck 2WD L6-5.9L DSL Turbo VI... Service and Repair Page 1 of 15 Home Account Contact ALLDATA Log Out Help PAUL REDEHOFT Select Vehicle New TSBs Technician's Reference Component Search: OK 2006 Dodge Truck RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN C Conversion

More information

SMT Assembly. Machining

SMT Assembly. Machining SMT Assembly Machining Production of Plastics Parts LUMEL s Offer in the Scope of SMT Assembly and Precision Engineering LUMEL S.A. experience and competence For over 53 years, LUMEL S.A. is well-known

More information

SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB

SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB

More information

Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System

Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Revised Sept--22-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Description The sealed circular RJ45 connector system is designed for use in harsh environments. The connector

More information

COPPER FLEX PRODUCTS

COPPER FLEX PRODUCTS COPPER FLEX PRODUCTS WHY FLEX? Molex ible Printed Circuit Technology is the answer to your most challenging interconnect applications. We are your total solution for ible Printed Circuitry because we design

More information

Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors

Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical

More information

1.. Warm Welcome.. To

1.. Warm Welcome.. To 1.. Warm Welcome.. To WHO WE ARE 2 The International Leader in Production of Industrial Components & Parts (Metal and Plastic) The Global OEM (Original Equipment Manufacturer) for Air Conditioners, Freezers,

More information

Drive shaft, servicing

Drive shaft, servicing Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,

More information

OVEN PARTS For Models:GSC308PJB05, GSC308PJQ05, GSC308PJT05, GSC308PJS05 (Black) (White) (Biscuit) (Black Stainless)

OVEN PARTS For Models:GSC308PJB05, GSC308PJQ05, GSC308PJT05, GSC308PJS05 (Black) (White) (Biscuit) (Black Stainless) OVEN PARTS 30" BUILT IN ELECTRIC COMBO SENSOR/SC (GOLD LINE) 3 05 Litho In U.S.A. (cre) 1 Part No. Rev.A OVEN PARTS 1 Literature Parts 4455994 Installation Instructions Use & Care Guide 8300346 Microwave

More information

POWER WAVE 455M/STT & (CE)

POWER WAVE 455M/STT & (CE) Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-450 P-450 PARTS LIST FOR POWER WAVE 455M/STT & (CE) P-450-A P-450-A ILLUSTRATION

More information

MDU SC Connector Termination Procedure

MDU SC Connector Termination Procedure MDU SC Connector Termination Procedure Series: 718-NANN-NNNNN B Update the stripping length 11/24/09 A Initial Release 4/30/09 Version Revision History Summary Issue Date I INTRODUCTION This document describes

More information

TOP AND CABINET PARTS For Models: WTW6800WW1, WTW6800WB1, WTW6800WL1 (White) (Black) (Lunar Silver)

TOP AND CABINET PARTS For Models: WTW6800WW1, WTW6800WB1, WTW6800WL1 (White) (Black) (Lunar Silver) TOP AND CABINET PARTS AUTOMATIC WASHER 5 09 Printed In U.S.A. (drd)(bay)(bay) 1 Part No. Rev. B TOP AND CABINET PARTS 1 Literature Parts Use & Care Guide W10240440 English/French W10240441 Spanish Installation

More information

Instrument and Control Systems Laboratory 1 (0-3) Laboratory experiments on topics covered in instrument and control systems.

Instrument and Control Systems Laboratory 1 (0-3) Laboratory experiments on topics covered in instrument and control systems. 01211231 Conventional and Computer-Controlled Machines 3 (3-0) Prerequisite : 01208281 Conventional machine for tools: turning, drilling, tapping, milling, grinding, cutting, punching, boring and bending;

More information

HARTING Ethernet Cabling 8-poles Overview

HARTING Ethernet Cabling 8-poles Overview Overview Connectors [on page B 2 8] System cables [on page B 2 10] Distribution modules and Outlets [on page B 2 13] Connectors [on page B 2 16] System cables [on page B 2 20] Panel feed-throughs [on page

More information

OVEN PARTS For Models:GMC305PDB07, GMC305PDQ07, GMC305PDT07, GMC305PDS07 (Black) (White) (Biscuit) (S.Steel)

OVEN PARTS For Models:GMC305PDB07, GMC305PDQ07, GMC305PDT07, GMC305PDS07 (Black) (White) (Biscuit) (S.Steel) OVEN PARTS 30" BUILT IN ELECTRIC COMBO SENSOR/SC (GOLD LINE) 7 03 Litho In U.S.A. (cre) 1 Part No. OVEN PARTS NOTE: The screws and nuts required to attach a part are listed immediately following that part.

More information

5Gravity. Conveyor. No. 5of 7. The most cost-effective and simplest conveying solution available

5Gravity. Conveyor. No. 5of 7. The most cost-effective and simplest conveying solution available Gravity Conveyor The most cost-effective and simplest conveying solution available No. of 7 2 3 4 Belt Conveyor For careful and extremely low noise conveying. Lineshaft Powered Roller Conveyor The most

More information

2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure

2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure 2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure Derek Guenther 1/28/2015 Rev. Purpose The purpose of this document is to describe the procedure necessary to replace one of the ball nuts

More information

www.axon-cable.com Power distribution systems

www.axon-cable.com Power distribution systems www.axon-cable.com Power distribution systems Power distribution systems As vital components for electrical power distribution in telecommunication satellites and landbased weapon systems, the bus and

More information

COMMON WEAR PARTS & QUICK REFERENCE PARTS BREAKDOWN

COMMON WEAR PARTS & QUICK REFERENCE PARTS BREAKDOWN COMMON WEAR PARTS & QUICK REFERENCE PARTS BREAKDOWN SERIES MECHANICAL SWEEPERS pn GS328985 REV B MAY 2012 COPYRIGHT 2012 GLOBAL ENVIRONMENTAL PRODUCTS, INC. ALL RIGHTS RESERVED REV B MAY 2012 Page 2 Common

More information

7.1 Safety Precautions-Aircraft and Workshop 3 3 3. 7.2 Workshop Practices 3 3 3

7.1 Safety Precautions-Aircraft and Workshop 3 3 3. 7.2 Workshop Practices 3 3 3 Note: This module does not apply to category B3. Relevant subject matters for category B3 are defined in module 7B. 7.1 Safety Precautions-Aircraft and Workshop 3 3 3 Aspects of safe working practices

More information

Front axle components, overview

Front axle components, overview just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,

More information

Automatic welding machine A25 STB with TIG torch BTE 500M and slide for floating welding head

Automatic welding machine A25 STB with TIG torch BTE 500M and slide for floating welding head Spare parts list Edition 061219 Valid for serial 751 -xxx -xxx, 838 -xxx -xxx Ordering Product 0443 911 880 Automatic welding machine A25 STA with TIG torch BTE 250M and AVC slide 0443 911 881 Automatic

More information

Volkswagen B3 Passat Manual Transmission 02A 34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed. Gearshift cable/lever installing

Volkswagen B3 Passat Manual Transmission 02A 34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed. Gearshift cable/lever installing 34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed Gearshift cable/lever installing Gearshift housing repairing Gearshift lever repairing lever/relay lever, installing Gearshift mechanism

More information

Steel Tank Erection and Repair

Steel Tank Erection and Repair Steel Tank Erection and Repair The BYGGING-UDDEMANN method was introduced at the end of the 1950s to rationalize the erection of steel cisterns for various storage purposes. The method is used for cisterns

More information

Pump Skid Fabrication for Magnetic Coupling. Rick Soltis Chief Mechanic City of Bedford

Pump Skid Fabrication for Magnetic Coupling. Rick Soltis Chief Mechanic City of Bedford Pump Skid Fabrication for Magnetic Coupling Rick Soltis Chief Mechanic City of Bedford Contents Magnetic Couplings What They Are, How They Work, Where They re Used Fabrication and Manufacturing of Pump

More information

BBWX1 Satellite Weather Receiver. Installation and Maintenance Guide

BBWX1 Satellite Weather Receiver. Installation and Maintenance Guide BBWX1 Satellite Weather Receiver Installation and Maintenance Guide Rev FUSA 15JUL2007 Table of Contents Safety Precautions 3 Disclaimer. 3 Contents of Package. 4 Tools Required..4 Installation General

More information

Cable Trays Technical Instructions & Specifications

Cable Trays Technical Instructions & Specifications Cable Trays Technical Instructions & Specifications Products Catalogue Objective and Structure The company s main objective is the supply of quality products, with respect to: practical design increased

More information

03/12/14 19:25:24 IAM 751 PAGE 1 Job Titles by Job Number

03/12/14 19:25:24 IAM 751 PAGE 1 Job Titles by Job Number 03/12/14 19:25:24 IAM 751 PAGE 1 A12A0 C APPRENTICE TEMPORARY JIG & FIXTURE BUILDER A A12A1 C APPRENTICE TEMPORARY JIG & FIXTURE BUILDER B A12A2 C APPRENTICE TEMPORARY JIG & FIXTURE BUILDER C A12A3 C APPRENTICE

More information

Flex Circuit Design and Manufacture.

Flex Circuit Design and Manufacture. Flex Circuit Design and Manufacture. Hawarden Industrial Park, Manor Lane, Deeside, Flintshire, CH5 3QZ Tel 01244 520510 Fax 01244 520721 Sales@merlincircuit.co.uk www.merlincircuit.co.uk Flex Circuit

More information

QM (1.78mm-.070") CONNECTORS-"MICRO 70"

QM (1.78mm-.070) CONNECTORS-MICRO 70 QM (1.78mm-.070") CONNECTORS-"MICRO 70" General Designed to fill the needs of high density and miniature interconnection, the QM series are Super-Small IDC Connection. This IDC plug uses I/O Cable

More information

Go-kart for little race-drivers

Go-kart for little race-drivers Go-kart for little race-drivers Drill and drive. Go-kart What it lacks in speed, it more than makes up for in fun: the go-kart will excite little race-drivers. 1 Introduction It s only a go-kart, but it

More information

Embedded Parts Introduction - Anchors

Embedded Parts Introduction - Anchors In the plant construction or process plants such as chemical, petrochemical, gas or power plants various disciplines are brought into contact and built on each other. Civil, mechanical, electro technical

More information

GK Packing System Welding Instructions

GK Packing System Welding Instructions GK Packing System Welding Instructions Roxtec GmbH Neuer Höltigbaum 1-3, 22143 Hamburg GERMANY Tel +49 (040) 657398-0, Fax +49 (040) 657398-50 EMAIL info@de.roxtec.com, www.roxtec.de Welding instructions

More information

Power Cube Open Source Ecology Page 1. Power Cube. Version 4

Power Cube Open Source Ecology Page 1. Power Cube. Version 4 Power Cube Open Source Ecology Page 1 Power Cube Version 4 Power Cube Open Source Ecology Page 2 Contents Table of Contents Power Cube... 1 Contents...2 Introduction... 3 Bill Of Materials...4 Discrete

More information

114-22008. 8-Position Cat5e (EMT) Modular Plug Connectors. Application Specification

114-22008. 8-Position Cat5e (EMT) Modular Plug Connectors. Application Specification Application Specification 114-22008 02/May/2008 Rev H 8-Position Cat5e (EMT) Modular Plug Connectors NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are

More information

3000, 4000, 4100, 7500, 7700

3000, 4000, 4100, 7500, 7700 3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the

More information

Your Plastics Technology Partner

Your Plastics Technology Partner Your Plastics Technology Partner talbottechnologies.co.nz .3 Talbot Technologies is the outcome of an amalgamation of world class technical injection moulder Talbot Plastics (Established 1972), with innovative

More information

Precision components from start to finish. Excellence. in performance-critical machining & fabrications

Precision components from start to finish. Excellence. in performance-critical machining & fabrications Precision components from start to finish Excellence in performance-critical machining & fabrications Leading precision machining technology... Fully integrated solutions Facilities and capabilities The

More information

Acceptability of Printed Circuit Board Assemblies

Acceptability of Printed Circuit Board Assemblies Section No.: 12I.2.3, Sheet 1 of 9 Rev Level: 16 Additional Distribution: PCB Assembly Subcontractors 1.0 Purpose 2.0 Scope Acceptability of Printed Circuit Board Assemblies 1.1 The purpose of this standard

More information

Parts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!

Parts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge! Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm

More information

Project Management Services. Mechanical Services. Support Services. Electrical Services. Clean Room Services. Blade Sharpening

Project Management Services. Mechanical Services. Support Services. Electrical Services. Clean Room Services. Blade Sharpening Project Management Mechanical Support Electrical Clean Room Blade Sharpening The total solution to all your engineering needs PROJECT MANAGEMENT Project management serves as the client s project management

More information

CutMaster 82. 6.04 Major External Replacement Parts

CutMaster 82. 6.04 Major External Replacement Parts CutMaster 8 6.0 Major External Replacement Parts Item # Qty Description Catalog # Cover with labels 9-08 Base Enclosure Assembly 9-08 Tube, roll handle 9-0 Front Panel 9-07 Rear Panel 9-00 Art # A-080

More information

installation instructions

installation instructions installation instructions ACCESSORY ELECTRIC HEAT 208/230 AND 460-V UNITS 558E,F Sizes 240-324 20 to 27 Tons Cancels: New IIK 558E-240-9 11/1/94 IMPORTANT READ BEFORE INSTALLING 1. Read and become familiar

More information

FRICTION MATERIALS & BONDING SERVICES

FRICTION MATERIALS & BONDING SERVICES FRICTION MATERIALS & BONDING SERVICES World Class Friction Materials & Bonding Services The Industry Leader Midwest Brake has been a leading supplier of non asbestos industrial friction material and bonding

More information

IT-SOLUTIONS.

IT-SOLUTIONS. IT-SOLUTIONS Well conceived Haewa Group has gained a strong profile as an innovative and competent supplier for the machinery, systems, electrical and electronic industries, well beyond European geographic

More information

TARIFF CODE and updates standard

TARIFF CODE and updates standard TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of

More information

6000 Series Buccaneer

6000 Series Buccaneer Robust, instant connections for harsh environments 6000 Series Buccaneer - circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available

More information

PCB Design Guidelines

PCB Design Guidelines 5. PCB legend PCB Design Guidelines 1. Introduction 2. Data format 2.1. General 2.2. Documentation 3. PCB machining 3.1. Drilling (CNC) 3.2. Scoring (CNC) 3.3. Milling (CNC) 3.4. PCB panels 4. Outer layers

More information

Mini USB and USB 2.0-IP67 Connector System

Mini USB and USB 2.0-IP67 Connector System Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet

More information

Universal Vehicle Power Supply 9007AX01. Installation Instructions

Universal Vehicle Power Supply 9007AX01. Installation Instructions Universal Vehicle Power Supply 9007AX01 Installation Instructions Disclaimer Honeywell International Inc. ( HII ) reserves the right to make changes in specifications and other information contained in

More information

REPAIR INSTRUCTIONS UNDER BODY CYLINDER (UM, UL)

REPAIR INSTRUCTIONS UNDER BODY CYLINDER (UM, UL) Table of contents 1. Introduction... 3 1.1. Scope of use... 3 1.2. General remarks... 3 1.3. Contact Hyva... 3 1.4. Precautions... 4 1.5. Spare parts... 4 1.5.1. Prior to use... 4 1.6. Recycling and Reuse

More information

CHAPTER 12 : OXFORD MERMAID & RANGER HOIST PRODUCTS

CHAPTER 12 : OXFORD MERMAID & RANGER HOIST PRODUCTS CHAPTER 12 : OXFORD MERMAID & RANGER HOIST PRODUCTS Sunrise Medical is ISO 9001 certified, which ensures quality at all stages of the development and production of this hoist. Contents MODEL SERIAL NO.

More information

Composite Materials & Manufacturing

Composite Materials & Manufacturing Training Objective After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of the nature of composite materials and the ways in which these materials

More information

CLASS III TRUCK PARTS Baker

CLASS III TRUCK PARTS Baker CLASS III TRUCK PARTS Baker Identify replacement parts for Baker PAL, PAL-AR, PAL-WR 7.2 Instant Access to 250,000 Parts and Growing Baker PAL, PAL-AR, PAL-WR 1 000 774-1033 Toggle 26 000 757-1050 Tie

More information

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12 DUAL BEVEL COMPOUND MITER SAW B27A PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510

More information

CZ-MX 125/250/ CHASSIS PARTS KATALOG II 7/2015

CZ-MX 125/250/ CHASSIS PARTS KATALOG II 7/2015 CZ-MX 125/250/360-380-400 CHASSIS PARTS KATALOG II 7/2015 PLEASE NOTE: All prices are quoted in New Zealand Dollars. For a quote in any other currency please contact me by email and provide the delivery

More information

Air Vantage 500 Kubota

Air Vantage 500 Kubota Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-625 P-625 RETURN TO MAIN INDEX PARTS LIST FOR Air Vantage 500 Kubota P-625-A

More information

Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH

Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH C 091 A Main Features Metal threaded coupling acc. to IEC. Number of contacts are 2 to 8, 12 and 14. Internal metal strain relief

More information

Universal Type Hold-Downs. Safety Grip Hold-Downs for 6- & 12-Volt Applications

Universal Type Hold-Downs. Safety Grip Hold-Downs for 6- & 12-Volt Applications Universal Type Hold-Downs 00251 00236 09645 09646 00246 00250 00678 Safety Grip Hold-Downs for 6- & 12-Volt Applications Method of Installation Battery Hold-Down Bolts, Washers, & Nuts Heavy tempered steel

More information

FUNCTIONAL SPECIFICATION FOR CHAIN PULLEY BLOCK

FUNCTIONAL SPECIFICATION FOR CHAIN PULLEY BLOCK SHEET 1 OF 9 SPECIFICATION FOR SHEET 2 OF 9 1.0 GENERAL 1.1 This specification along with data sheets, other specifications & attachments to inquiry / order describes and constitutes the minimum requirement

More information

ASSORTMENTS. Imperial Drawer Assortments Your Key to Efficient Maintenance and Repair. Ready To Get Organized? Imperial Drawer Assortments:

ASSORTMENTS. Imperial Drawer Assortments Your Key to Efficient Maintenance and Repair. Ready To Get Organized? Imperial Drawer Assortments: Imperial Drawer Assortments Your Key to Efficient Maintenance and Repair. Overall Drawer Size 18" W x 3" H x 12" D Imperial Drawer Assortments: 1. Contain the most popular sizes and styles. 2. Each part

More information

Technology Design Task

Technology Design Task Technology Design Task -Artefact Production- Design Task Artefact A number of factors can be considered in influencing the extent to which the completed artefact fully satisfies the chosen design brief

More information

Metal Stamping or Metal Fabrication: Choosing the best method for production

Metal Stamping or Metal Fabrication: Choosing the best method for production WHITE PAPER Metal Stamping or Metal Fabrication: Choosing the best method for production The process of deciding how to manufacture metal parts using either metal stamping or fabrication techniques is

More information

13CD609G HP Lawn Tractor (2002) Page 1 of Inch Deck

13CD609G HP Lawn Tractor (2002) Page 1 of Inch Deck 13CD609G063 17.5HP Lawn Tractor (2002) Page 1 of 20 42 Inch Deck 13CD609G063 17.5HP Lawn Tractor (2002) Page 2 of 20 42 Inch Deck 1 16606 1 S Bracket: Retainer Hook 2 618-0565 1 S Spindle Assembly: Pulley

More information

Robot Welding Torch System

Robot Welding Torch System T e C H N O L O G y f O R T H e W e L d e R s W O R L d. Robot Welding Torch System W W Robot welding torch system... The universal MIG/MAG-torch system for robot welding: A new interface and cable assembly

More information

PRECISION MACHINING & ASSEMBLY COMPANY

PRECISION MACHINING & ASSEMBLY COMPANY COMPANY PROFILE PRECISION MACHINING & ASSEMBLY COMPANY Medmakina as a company that specialized on the precision CNC Machining & Assembly of highreliabilty components for the Aerospace, Defense Industries,

More information

Section 21. Telecommunication Hardware. www.geindustrial.com BuyLog Catalog 21-1

Section 21. Telecommunication Hardware. www.geindustrial.com BuyLog Catalog 21-1 Introduction...21-1 Fiber Closure Hardware...21-2 Cable Location Surge Protectors...21-4 Introduction GE has been manufacturing Telecommunication Hardware products for over 20 years and has become a leader

More information

K&T Saw Shop or

K&T Saw Shop or 11-600012 SUPER 10-10E CHAIN SAW 08/69 to 10/70 IPL 69914 Page 1 of 17 Accessories www.ktoutdoor.com 11-600012 SUPER 10-10E CHAIN SAW 08/69 to 10/70 IPL 69914 Page 2 of 17 Accessories 83434 Manual - Owner's

More information

COMPANY PROFILE R&G. Sheetmetal. Expansion on the horizon

COMPANY PROFILE R&G. Sheetmetal. Expansion on the horizon COMPANY PROFILE 2014 R&G Sheetmetal Expansion on the horizon company profile Expansion on the horizon Editorial: Lauren Grey Production: Chris Bolderstone One of South Africa s biggest metal fabricators,

More information

Trident Connector Family Offers the Versatility and Reliability Required in Industrial & Transportation Applications

Trident Connector Family Offers the Versatility and Reliability Required in Industrial & Transportation Applications Trident Connector Family Offers the Versatility and Reliability Required in Industrial & Transportation Applications Industrial and transportation applications require robust connections with superior

More information

LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions

LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment

More information

MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK

MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK 1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD

More information

How to Build a Printed Circuit Board. Advanced Circuits Inc 2004

How to Build a Printed Circuit Board. Advanced Circuits Inc 2004 How to Build a Printed Circuit Board 1 This presentation is a work in progress. As methods and processes change it will be updated accordingly. It is intended only as an introduction to the production

More information

Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)

Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8

More information

HARTING Ethernet Cabling 4-poles Overview

HARTING Ethernet Cabling 4-poles Overview Ethernet Cabling 4-poles Overview RJ45 Connectors [on page 8] System cables [on page 10] Distribution modules and Outlets [on page 20] Connectors [on page 22] System cables [on page 24] Panel feed-throughs

More information

Use and Maintenance Manual

Use and Maintenance Manual Carbon steering wheels Use and Maintenance Manual 1 SUMMARY 1. INTRODUCTION...3 1.1 Product presentation...3 1.2 Patents...4 1.3 CE certification...4 1.4 Contents of the box...5 2. SAFETY NOTES...5 3.

More information