SINGLE-GANG BOXES to , CUBIC IN.

Transcription

1 SINGLE-GANG BOXES H1 S For use in branch circuit wiring in wet, damp, or dry locations. May be used as a weatherproof junction box, or as a housing for receptacles, switches, and GFCI s. Reinforced connector outlets State-of-the-art powder coat finish Eight box mounting options with detachable lugs provided Two closure plugs included Ground screw installed Multi-lingual instructions in each package Internal threads on hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit die cast aluminum construction to , to , , , to OUTLETS 2" Deep, With Lugs Three Threaded Outlets 4-1/2" x 2-3/4" Gray 3-1/2" Shrink White 3-1/2" Shrink Bronze 3-1/2" Shrink Gray 3-3/4" Shrink 20 Standard 514A C22.2 No. 18 NEMA 3R Rated SINGLE-GANG BOXES: GENERAL DIMENSIONS OUTLETS 2" Deep, With Lugs Four Threaded Outlets 4-1/2" x 2-3/4" Gray 4-1/2" Shrink White 4-1/2" Shrink Bronze 4-1/2" Shrink Gray 4-3/4" Shrink 20 OUTLETS 2" Deep, With Lugs Five Threaded Outlets 4-1/2" x 2-3/4" Gray 5-1/2" Shrink Gray 5-3/4" Shrink Gray 5-1/2" Shrink Gray 5-3/4" Shrink 20 END VIEW ONE OUTLET END VIEW TWO OUTLET OUTLETS 2-5/8" Deep, With Lugs Three Threaded Outlets 4-1/2" x 2-3/4" Gray 3-1/2" Shrink Gray 3-3/4" Shrink Gray 3-1" Shrink 15

2 H2 SINGLE-GANG EXTENSIONS AND ADAPTERS S Used to provide additional capacity needed for NEC box ll requirements. Adapters allow installer to add take-offs" to new boxes/devices. Installation hardware, gasket, and ground screw provided Closure plugs provided for two and six outlet styles Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit die cast aluminum construction , to Single-Gang Extension 4-1/2" x 2-3/4" x 1" Deep OUTLETS Gray Shrink 25 o g o d c o id d Standard 514A C22.2 No. 18 NEMA 3R Rated EXTENSIONS CAT. NO OUTLETS Single-Gang Extension Adapters 5-1/4" x 3-1/2" x 1-1/2" Deep Two Threaded Outlets Gray 2-1/2" Shrink Gray 2-3/4" Shrink 20 c d o co g OUTLETS Single-Gang Extension Adapters 5-1/4" x 3-1/2" x 1-1/2" Deep Six Threaded Outlets Gray 6-1/2" Shrink Gray 6-1/2" Carded Gray 6-3/4" Shrink 20 c d t co g CAT. NO s , SERIES

3 SINGLE-GANG EXTENSION ADAPTERS H3 S Used to provide additional capacity needed for NEC box ll requirements. Allows installer to add take-offs" to new boxes/devices. Unique swing-arm design speeds installation by allowing the installer better visibility when lining up and threading fasteners Rugged die cast construction Reinforced connector outlets State-of-the-art powder coat finish Installation hardware, ground screw and gasket provided Multi-lingual instructions in each package Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit die cast aluminum construction Standard 514A C22.2 No. 18 NEMA 3R Rated c d o co g , OUTLETS OUTLETS Swing-Arm Extension Adapters 5-1/4" x 3-1/2" x 1-1/2" Deep Six Threaded Outlets , Swing-Arm Extension Adapters 5-1/4" x 3-1/2" x 1-1/2" Deep Two Threaded Outlets Gray 2-1/2" Shrink Gray 2-3/4" Shrink Gray 6-1/2" Shrink Gray 6-3/4" Shrink 10 c d t co g SWING ARM EXTENSION ADAPTERS CAT. NOs TO

4 H4 TWO-GANG BOXES S For use in branch circuit wiring in wet, damp, or dry locations. Can be used as a weatherproof junction box, or as a housing for receptacles, switches, and GFCI s. Seamless die cast aluminum construction Reinforced connector outlets State-of-the-art powder coat finish Eight box mounting options with detachable lugs provided Two closure plugs included Ground screws installed Multi-lingual instructions in each package Internal threads on hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit Standard 514A C22.2 No. 18 NEMA 3R Rated TWO-GANG BOXES GENERAL DIMENSIONS , , TO , OUTLETS 2" Deep, With Lugs Three Threaded Outlets 4-1/2" x 4-1/2" /" i /4" i OUTLETS 2" Deep, With Lugs Four Threaded Outlets 4-1/2" x 4-1/2" / " i /4" i OUTLETS 2" Deep, With Lugs - Five Threaded Outlets - 4-1/2" x 4-1/2" , Gray 5-1/2" Shrink White 5-1/2" Shrink Gray 5-3/4" Shrink Gray 5-1/2" Shrink Gray 5-3/4" Shrink 12 END VIEW FOR STYLES WITH TWO OUTLETS ON ONE END

5 TWO-GANG BOXES H5 S For use in branch circuit wiring in wet, damp, or dry locations. Can be used as a weatherproof junction box, or as a housing for receptacles, switches, and GFCI s. Seamless die cast aluminum construction Reinforced connector outlets State-of-the-art powder coat finish Eight box mounting options with de-tachable plugs provided Two closure plugs included Ground screws installed Multi-lingual instructions in each package , , , OUTLETS 2" Deep, With Lugs Seven Threaded Outlets 4-1/2" x 4-1/2" /" i /4" i /" i Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit /4" i c d t o co g Standard 514A C22.2 No. 18 NEMA 3R Rated OUTLETS 2-5/8" Deep, With Lugs Five Threaded Outlets 4-1/2" x 4-1/2" /4" i " i c d t o co g TWO-GANG BOXES WITH 7 OUTLETS CAT. NOs , CAT. NOs , TWO-GANG BOXES WITH 5 OUTLETS CAT. NOs ,

6 H6 MULTI-GANG BOXES AND EXTENSIONS TWO-GANG EXTENSION Used to provide additional capacity needed for NEC box ll requirements. TWO-GANG EXTENSION Seamless die cast aluminum construction State-of-the-art powder coat finish Installation hardware and gasket provided Multi-lingual instructions in each package TWO-GANG EXTENSION Standard 514A C22.2 No. 18 NEMA 3R Rated THREE-GANG BOX S For use in branch circuit wiring in wet, damp, or dry locations. Can be used as a weatherproof junction box, or as a housing for receptacles, switches, and GFCI s Gray 7-3/4" Boxed 1 THREE-GANG BOX PRODUCT c d o co g FEATURES Seamless die cast aluminum construction Reinforced connector outlets State-of-the-art powder coat finish TWO-GANG EXTENSION Eight box mounting options with detachable lugs provided Four closure plugs included Ground screws installed Multi-lingual instructions in each package Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit OUTLETS Two-Gang Extension 4-21/32" x 4-21/32" x 1-1/32" Deep Gray Shrink 10 OUTLETS Three-Gang Box 2-5/8" Deep, With Lugs Seven Threaded Outlets 4-1/2" X 6-3/8" THREE-GANG BOX Standard 514A C22.2 No. 18 NEMA 3R Rated THREE-GANG BOX

7 ROUND SPLICE BOXES, EXTENSION ADAPTERS AND COVERS H7 4" ROUND SPLICE BOXES S For use in branch circuit wiring in wet, damp, or dry locations. Designed for use as a weatherproof junction box, and may be used with Bell round cluster covers and round lampholder combinations. 4" ROUND SPLICE BOXES Rugged die cast construction Reinforced connector outlets State-of-the-art powder coat finish Cast-in mounting lugs provide fast, secure installation Includes four closure plugs, installed ground screw, and multi-lingual instructions 4" ROUND SPLICE BOXES Standard 514A C22.2 No. 18 NEMA 3R Rated 4" ROUND EXTENSION ADAPTERS S For use with 4" round splice boxes. Extension adapters are used to in-crease box capacity and allow the installer to add takeoffs" to new boxes/devices. 4" ROUND EXTENSION ADAPTERS Rugged die cast construction Reinforced connector outlets State-of-the-art powder coat finish Includes installation hardware, closure plugs, gasket, and multi-lingual instructions 4" ROUND EXTENSION ADAPTERS Standard 514A C22.2 No. 18 NEMA 3R Rated to , " ROUND SPLICE BOXES 4" ROUND EXTENSION ADAPTERs OUTLETS 4" Round Splice Box Five Threaded Outlets 1-1/2" Deep Gray 5-1/2" Shrink White 5-1/2" Shrink Bronze 5-1/2" Shrink Gray 5-3/4" Shrink OUTLETS 4" Round Extension Adapter Four Threaded Outlets 1-1/2" Deep Gray 4-1/2" Shrink OUTLETS 4" Round Splice Box & Cover Five Threaded Outlets 1-1/2" Deep Gray 5-1/2" Shrink Gray 5-3/4" Shrink 16 OUTLETS 4" Round Cover Gray Blank Shrink 30 4" ROUND COVER

8 H8 SPECIALTY COVERS MINI SNAP COVER AND RECEPTACLE For use when a convenience outlet is required in a small space. MINI SNAP COVER AND RECEPTACLE PRODUCT FEATURES State-of-the-art powder coat finish provides for maximum weather-ability and scratch resistance Self-closing lid assures weatherproof protection when the receptacle is not in use OUTLETS PKG Mini Snap Cover And Receptacle 3" x 2" x 1-1/8" Deep Gray Cover & 125V 15A receptacle Polybag 10 cover cat. no

9 RAYNTITE SINGLE-GANG WEATHERPROOF-WHILE-IN-USE COVERS H9 Rayntite covers are designed for use whenever weatherproof protection is required while an outlet is in use. Modularity: 6 SKU s cover almost every application no need to tie-up money and shelf space stocking multiple SKU s Unique snap fit design speeds installation. No more fumbling with open covers High-impact polycarbonate construction: Virtually indestructible No need to worry about rust and corrosion Tinted lid: Hides dust, dirt, and scratches Padlockable design: Prevents tampering and accidental disconnects Tri-lingual instructions: One product for all North American markets Covers can be either device or box mounted allows for installation flexibility Single-Gang Standard Depth RECEPTACLE Single gang vertical cover with 4 plates included -for duplex, GFCI, toggle and single round receptacles 1.344, 1.406, 1.468, 1.593, 1.655, 1.719, and Dia Single gang horizontal cover with 4 plates included - for duplex, GFCI, toggle and single round receptacles 1.344, 1.406, 1.468, 1.593, 1.655, 1.719, and Dia. Shrink 10 Shrink 10 Meets NEC (B) requirements no need to worry about code compliances CAT. NOs , NEMA 3R Rated Meets NEC (B) Requirements REFERENCE DATA Canadian Patent 2,092, 516 United States Patents 5,981, 875 5,533, 637 5,456, 377 5,228, 584

10 H10 RAYNTITE SINGLE-GANG WEATHERPROOF-WHILE-IN-USE COVERS Rayntite covers are designed for use whenever weatherproof protection is required while an outlet is in use. Modularity: 6 SKU s cover almost every application no need to tie- up money and shelf space stocking multiple SKU s Unique snap fit design speeds installation. No more fumbling with open covers High-impact polycarbonate construction: Virtually indestructible No need to worry about rust and corrosion Single-Gang Deep Tinted lid: Hides dust, dirt, and scratches Padlockable design: Prevents tampering and accidental disconnects Tri-lingual instructions: One product for all North American markets Covers can be either device or box mounted allows for installation flexibility Meets NEC (B) requirements no need to worry about code compliances CAT. NO RECEPTACLE Single gang vertical cover- Deep with 4 plates included - for duplex, GFCI, toggle and single round receptacles 1.344, 1.406, 1.468, 1.593, 1.655, 1.719, and Dia. Shrink 6 NEMA 3R Rated Meets NEC (B) Requirements REFERENCE DATA Canadian Patent 2,092, 516 United States Patents 5,981, 875 5,533, 637 5,456, 377 5,228, 584

11 RAYNTITE TWO-GANG WEATHERPROOF-WHILE-IN-USE COVERS H11 Rayntite covers are designed for use whenever weatherproof protection is required while an outlet is in use. Modularity: 6 SKU s cover almost every application no need to tie- up money and shelf space stocking multiple SKU s Unique snap fit design speeds installation. No more fumbling with open covers Two-gang plates can be mounted vertically or horizontally High-impact polycarbonate construction: Virtually indestructible No need to worry about rust and corrosion Tinted lid: Hides dust, dirt, and scratches Padlockable design: Prevents tampering and accidental disconnects Tri-lingual instructions: One product for all North American markets Covers can be either device or box mounted allows for installation flexibility Meets NEC (B) requirements no need to worry about code compliances NEMA 3R Rated Meets NEC (B) Requirements REFERENCE DATA Canadian Patent 2,092, 516 United States Patents 5,981, 875 5,533, 637 5,456, 377 5,228, Two-Gang Standard Depth CAT. NOs , RECEPTACLE Two-gang vertical cover- with 4 plates included - for duplex, and single round receptacles 1.344, 1.406, 1.468, 1.593, 1.655, 1.719, and Dia. Two-Gang Deep RECEPTACLE Two-gang vertical cover- Deep with 4 plates included - for duplex, and single round receptacles 1.344, 1.406, 1.468, 1.593, 1.655, 1.719, and Dia Shrink 5 Shrink 3

12 H12 RAYNTITE TWO-GANG WEATHERPROOF-WHILE-IN-USE COVERS Rayntite covers are designed for use whenever weatherproof protection is required while an outlet is in use. Modularity: 6 SKU s cover almost every application no need to tieup money and shelf space stocking multiple SKU s Unique snap fit design speeds installation. No more fumbling with open covers Two-gang plates can be mounted vertically or horizontally High-impact polycarbonate construction: Virtually indestructible No need to worry about rust and corrosion Tinted lid: Hides dust, dirt, and scratches Two-Gang Deep RECEPTACLE Two-gang vertical cover- Deep with 2 plates included - for single round receptacles 1.344, 1.406, 1.468, 1.593, 1.655, 1.719, and Dia. Shrink 3 Padlockable design: Prevents tampering and accidental disconnects Tri-lingual instructions: One product for all North American markets CAT. NOs Covers can be either device or box mounted allows for installation flexibility Meets NEC (B) requirements no need to worry about code compliances NEMA 3R Rated Meets NEC (B) Requirements REFERENCE DATA Canadian Patent 2,092, 516 United States Patents 5,981, 875 5,533, 637 5,456, 377 5,228, 584

13 RAYNTITE SINGLE-GANG DEVICE COVERS H13 For use whenever weatherproof protection is required for an outdoor receptacle. Rugged die cast aluminum construction State-of-the-art powder coat finish provides maximum weatherability and scratch resistance Self-closing lids assure weatherproof protection when the receptacle is not in use Vertical mount covers are padlockable May be mounted to box or device Includes installation hardware, gasket, and multi-lingual instructions Standard 514A C22.2 No. 18 NEMA 3R Rated to , Horizontal Mount RECEPTACLE Gray Duplex Shrink Gray GFCI Shrink 24 HORIZONTAL MOUNT COVERS VERTICAL MOUNT COVERS Vertical Mount Padlockable RECEPTACLE Gray Single, 1.593" Shrink 24 diameter Gray Duplex Shrink Gray GFCI Shrink White GFCI Carded Gray 20A, 1.710" Shrink 12 diameter Gray 30-50A, 2.150" Shrink 12 diameter Gray Single, 1.406" diameter Shrink 12

14 H14 RAYNTITE TWO-GANG DEVICE COVERS For use whenever weatherproof protection is required for an outdoor receptacle. Rugged die cast aluminum construction State-of-the-art powder coat finish provides maximum weatherability and scratch resistance Self-closing lids assure weatherproof protection when the receptacle is not in use Covers are padlockable, 1/4" dia. hole May be mounted to box or device Includes installation hardware, gasket, and multi-lingual instructions Standard 514A C22.2 No. 18 NEMA 3R Rated TWO-GANG DEVICE COVERS Vertical Mount Padlockable Gray (2) Duplex Shrink Gray (1) Duplex & (1) GFCI Shrink Gray (1) 30-50A Receptacle Shrink " diameter Gray (1) 30-50A Receptacle Shrink " diameter Gray (2) Receptacles, Shrink " diameter Gray (1) Single Receptacle, 1.406" Shrink 6 diameter & (1) GFCI Gray (2) Toggle Shrink Gray (1) Toggle & (1) Duplex Shrink Gray (1) Toggle & (1) GFCI Shrink Gray (2) GFCI Shrink 6

15 SINGLE-GANG DEVICE COVERS H15 For use whenever weatherproof protection is required for an outdoor receptacle. Rugged metallic construction State-of-the-art powder coat finish provides maximum weatherability and scratch resistance Self-closing lids assure weatherproof protection when the receptacle is not in use Includes installation hardware, gasket, and multi-lingual instructions Standard 514A C22.2 No. 18 NEMA 3R Rated CAT. NOs SERIES, , CAT. NO SERIES to Horizontal Device Mount to RECEPTACLE Gray Duplex Shrink White Duplex Shrink Bronze Duplex Shrink Gray Duplex Shrink Gray GFCI Shrink White GFCI Shrink Bronze GFCI Shrink Gray GFCI Shrink Gray Single, 1.406" diameter Shrink Gray Motor plug base, 1.600" diameter, Shrink V, 15A wiring device included Gray 125V, 15A Duplex receptacle included Carded 6 / i t d CAT. NO Horizontal Box Mount RECEPTACLE Gray Duplex Shrink 24 CAT. NO CAT. NO CAT. NO /4" 2-3/4" 4-1/2" 4-1/2"

16 H16 GENERATOR KITS S For temporary power back-ups following storms, on construction sites, with RV s or anywhere temporary power is needed. Extra-deep weatherproof box gives installers the room needed to wire the box efficiently. State-of-the-art powder-coated finish provides years of protection against the elements. Installation hardware, gasket, and ground screw is provided. No need to search for additional components. C22.2 NO. 18 NEMA 3R RATED Gray Generator Hook-up Box with 3-pole, 4 wire, 30A, 125/250V NEMA L14-30 male receptacle 58355KIT Gray Generator Hook-up Box with 3 pole, 4 wire, 20A, 125/250V NEMA L14-20 male receptacle Boxed 4 Boxed 4

17 SINGLE-GANG DEVICE COVERS H17 For use whenever weatherproof protection is required for an outdoor receptacle. Rugged metallic construction State-of-the-art powder coat finish provides maximum weatherability and scratch resistance Self-closing lids assure weatherproof protection when the receptacle is not in use to to Includes installation hardware, gasket, and multi-lingual instructions to NEMA 3R Rated GFCI STYLE COVERS Vertical Device Mount RECEPTACLE Gray Duplex Shrink White Duplex Shrink Gray GFCI Shrink White GFCI Shrink Bronze GFCI Shrink Gray GFCI Shrink Gray Single, 1.406" diameter Shrink 24 SINGLE RECEPTACLE STYLE COVERS NOTE: DIMENSIONS FOR DEVICE-MOUNT AND BOX-MOUNT COVERS ARE THE SAME White Single, 1.406" diameter Shrink Bronze Single, 1.406" diameter Shrink 24 Vertical Box Mount RECEPTACLE Gray Duplex Shrink Gray Single, 1.406" diameter Shrink Gray Duplex Shrink 24 DUPLEX STYLE COVER CAT. NO , /2" 2-3/4"

18 H18 SINGLE-GANG BLANK COVERS AND MINI-PLATE BLANK COVERS For use whenever weatherproof protection is required for a single-gang box. BLANK COVERS PRODUCT FEATURES Rugged metallic construction State-of-the-art powder coat finish provides maximum weatherability and scratch resistance BLANK COVERS NEMA 3R Rated MINI-PLATE S For use with light poles. Provides a safe and convenient means of accessing power for holiday lighting, power tools, and the like. MINI-PLATE PRODUCT FEATURES Rugged metallic construction State-of-the-art powder coat finish provides maximum weatherability and scratch resistance Self-closing lid assures weatherproof protection when receptacle is not in use Includes installation hardware and receptacle Blank Covers Device Mount Gray Blank Cover Shrink White Blank Cover Shrink Bronze Blank Cover Carded 12 Blank Covers Box Mount Gray Blank Cover Shrink 50 Mini-Plate to Black Curved back, 1-1/2" radius - for 3" dia. pole mounting c d i c t c Shrink 48 BLANK COVERS MINI-PLATE

19 TWO-GANG DEVICE COVERS H19 For use whenever weatherproof protection is required for an outdoor receptacle. Rugged metallic construction State-of-the-art powder coat finish provides maximum weatherability and scratch resistance Self-closing lids assure weatherproof protection when the receptacle is not in use Includes installation hardware, gasket, and multi-lingual instructions Standard 514A ( ) C22.2 ( ) NEMA 3R Rated , Device Mount RECEPTACLE Gray (2) Duplex Shrink Gray (2) Round, 1.406" Dia. Shrink Gray (2) Duplex Shrink Gray (2) Single, 1.406" dia. Shrink Gray (1) Duplex & (1) Single, 1.406" dia. Shrink 12 TWO-GANG DEVICE COVERS SERIES, , , Box Mount RECEPTACLE Gray (2) Duplex Shrink Gray (2) Single, 1.406" dia. Shrink Gray (1) Duplex & Shrink 12 (1) Single, 1.406" dia Gray (1) Duplex, (1) GFCI Shrink Gray (2) GFCI Shrink /16" 4-9/16" 4-9/16" 4-9/16" 4-1/2" 4-1/2" 4-1/2" 4-1/2" NOTE: DIMENSIONS ARE THE SAME FOR DEVICE MOUNT AND BOX MOUNT STYLES SHOWN SERIES,

20 H20 TWO AND THREE-GANG DEVICE COVERS S For use whenever weatherproof protection is required for an outdoor receptacle. Blank covers for use whenever weatherproof protection is required for a multi-gang box. Rugged metallic construction State-of-the-art powder coat finish provides maximum weatherability and scratch resistance Self-closing lids assure weatherproof protection when the receptacle is not in use Includes installation hardware, gasket, and multi-lingual instructions to Three-Gang Device Cover Box Mount Gray (3) Duplex Boxed Gray (3) Single, 1.406" dia. Boxed 1 NEMA 3R Rated Three-Gang Blank Cover Box Mount Gray Blank Cover Boxed 10 THREE-GANG DEVICE COVERS AND Two-Gang Blank Cover Device Mount Gray Blank Cover Shrink White Blank Cover Shrink Bronze Blank Cover Shrink 25 BLANK COVERS , 5175 SERIES NOTE: DIMENSIONS ARE THE SAME FOR DEVICE MOUNT AND BOX MOUNT STYLES SHOWN.

21 SINGLE-GANG LEVER SWITCH COVERS H21 For use whenever weatherproof protection is required for an on-off" type switch. Rugged metallic construction State-of-the-art powder coat finish provides maximum weatherability and scratch resistance Includes installation hardware and multi-lingual instructions Single-gang covers are supplied with a switch no need to purchase separate components Switch/cover units are supplied with the switch unassembled to the cover Standard 514A Certied NEMA 3R Rated to , , Single-Gang Switch Covers Vertical Device Mounted Gray SP 125V, 10A Shrink White SP 125V, 10A Shrink Bronze SP 125V, 10A Shrink Gray 3-Way 125V, 6A or 250V, 3A Shrink Gray SP VAC, 20A Shrink Gray DP VAC, 20A Shrink 20 SINGLE-GANG 5121 SERIES 5141 SERIES CAT. NOs ,

22 H22 TWO-GANG LEVER SWITCH COVERS For use whenever weatherproof protection is required for an on-off" type switch. Rugged metallic construction State-of-the-art powder coat finish provides maximum weatherability and scratch resistance Includes installation hardware and multi-lingual instructions Most units supplied with a switch no need to purchase separate components Switch/cover units are supplied with the switch unassembled to the cover Standard 514A Certied NEMA 3R Rated Two-Gang Switch Covers Device Mounted Gray (2) SP 125V, 10A Shrink Gray Cover only Shrink Gray (1) SP 125V, 10A & Shrink 8 (1) Duplex receptacle Gray 2 Gang, Switch/GFCI Cover box mount Shrink 8 TWO-GANG CAT. NO , 5125 SERIES TWO-GANG 5167 SERIES TWO-GANG 5166 SERIES

23 THREE-GANG LEVER SWITCH COVER & REPLACEMENT SWITCH H23 Three-Gang Lever Switch Cover Application For use whenever weatherproof protection is required for an on-off" type switch. Three-Gang Lever Switch Cover Product Features Rugged metallic construction State-of-the-art powder coat finish provides maximum weatherability and scratch resistance Includes installation hardware and multilingual instructions Weatherproof Boxes, Covers & Lighting Three-gang cover is supplied with switches no need to purchase separate components Switch/cover units are supplied with the switch unassembled to the cover Three-Gang Lever Switch Cover Compliances NEMA 3R Rated ( only) three-gang CAT. No toggle switch CAT. Nos

24 H24 CLUSTER COVERS S For use with Bell single-gang rectangular or round weather-proof boxes. Cluster covers provide an easy means of mounting Bell lampholders and other accessories. Rugged die cast construction State-of-the-art powder coat finish provides maximum weatherability and scratchresistance Includes installation hardware, gasket, and multi-lingual instructions Three-hole covers are supplied with two closure plugs Standard 514A Certied - C22.2 # to to to to Rectangular Cluster Covers Gray 1-1/2" Outlet Shrink White 1-1/2" Outlet Shrink Bronze 1-1/2" Outlet Shrink Gray 3-1/2" Outlets Shrink White 3-1/2" Outlets Shrink Bronze 3-1/2" Outlets Shrink 20 RECTANGULAR CLUSTER COVERS 5186 SERIES, 5189 SERIES ROUND CLUSTER COVERS 5193 SERIES, 5197 SERIES 4" Round Cluster Covers Gray 1-1/2" Outlet Shrink White 1-1/2" Outlet Shrink Bronze 1-1/2" Outlet Shrink Gray 3-1/2" Outlets Shrink White 3-1/2" Outlets Shrink Bronze 3-1/2" Outlets Shrink 20

25 LAMPHOLDERS H25 S. For outdoor or indoor lighting use. May be used with Bell cluster covers and boxes. Rugged metallic construction State-of-the-art powder coat finish provides maximum weatherability and scratch-resistance Locking swivel knuckle assures positive lamp positioning and provides pin-point directional aiming Extra long wire leads for easy hook-up Each lampholder supplied with a porcelain socket, inside gasket, 1/2" locknut and multi-lingual instructions to Standard 1598 Certified C22.2 No SERIES Lampholders And Accessories For Watt Par 38 Lamps Gray Lampholder Shrink White Lampholder Shrink Bronze Lampholder Shrink Gray Lampholder w/gasket Shrink Outer gasket only, replacement gasket for Polybag Wire guard only Shrink 5 LAMPHOLDERS 5606 SERIES, CAT. NO Architectural Lampholders For Watt Par 38 Lamps Gray Lampholder Shrink White Lampholder Shrink Bronze Lampholder Shrink 4 CAT. NO

26 H26 LAMPHOLDERS PORTABLE LAMPHOLDER For general outdoor lighting use. PORTABLE LAMPHOLDER Rugged die-cast construction State-of-the-art powder coat finish provides maximum weatherability and scratch-resistance Locking swivel knuckle assures positive lamp positioning and provides pin-point directional aiming PORTABLE LAMPHOLDER BULLET LAMPHOLDER For general outdoor lighting use. May be used with BELL cluster covers and boxes BULLET LAMPHOLDER Rugged die cast Locking swivel knuckle Assure positive lamp positioning and provides pinpoint directional aming Includes installation hardware and multilingual instructions Portable Lampholder Assembly Gray Spike, 6 ft. cord & plug Polybag 12 Bullet Lampholders - For Watt Par 38 And R-40 Lamps Green Lampholder Boxed 2 BULLET LAMPHOLDER PORTABLE LAMPHOLDER ASSEMBLY BULLET LAMPHOLDER ASSEMBLY

27 LAMPHOLDER COMBINATIONS H27 For use with Bell single-gang rectangular or round weatherproof boxes. Rugged metallic construction State-of-the-art powder coat finish provides maximum weatherability and scratch-resistance Each combination kit is a complete weatherproof installation no need to purchase separate components Includes installation hardware, gasket, and multi-lingual instructions Standard 1598 Certied C22.2 No to to to Rectangular Cover Combinations For Watt Par 38 Lamps Gray (1) Lampholder Shrink Gray (2) Lampholders Shrink White (2) Lampholders Carded SERIES 4" Round Cover Combinations For Watt Par 38 Lamps Gray (1) Lampholder Shrink White (1) Lampholder Shrink Bronze (1) Lampholder Shrink Gray (2) Lampholders Shrink White (2) Lampholders Shrink Bronze (2) Lampholders Shrink SERIES 5624 SERIES 5625 SERIES

28 H28 LIGHT KITS For general use in wet, damp, or dry locations. Each kit is a complete weatherproof installation no need to purchase separate components Each kit includes easy-to-follow multi-lingual instructions All kit components are described in the preceding pages Standard 1598 Certied C22.2 No to to Rectangular Light Kits For Watt Par 38 Lamps Gray Box, cover, photocell & (2) lampholders White Box, cover, photocell & (2) lampholders Gray Box, cover & (2) lampholders White Box, cover & (2) lampholders STD Boxed 4 Boxed 4 Boxed 4 Boxed 4

29 LIGHT KITS H29 For general use in wet, damp, or dry locations. Each kit is a complete weatherproof installation no need to purchase separate components Each kit includes easy-to-follow multi-lingual instructions All kit components are described in the preceding pages Standard 1598 Certied C22.2 No to to " Round Light Kits For Watt Par 38 Lamps Gray Box, cover & (2) lampholders White Box, cover & (2) lampholders Gray Box, cover & (2) architectural lampholders Boxed 4 Boxed 4 Boxed White Box, cover & (2) architectural lampholders Boxed 4

30 H30 GARDEN LIGHTS For accent lighting along walkways, driveways, terraces, porches and garden areas. Rugged die cast construction State-of-the-art powder coat finish provides maximum weatherability and scratch-resistance Includes screw-in clear glass globe, wire connectors, gasket, and multilingual instructions Three-tier lights accept 40W maximum lamps Four-tier lights accept 60W maximum lamps CAT. NO Incandescent Type Threaded 1/2" Npt - 18" Leads Green 3-Tier Box Green 4-Tier Box 2 DIA. HEIGHT " 7" " 8-3/4" REPLACEMENT GLOBES REPLACEMENT GLOBES For use with Bell garden lights. REPLACEMENT GLOBE Replacement Globes For Garden Lights Clear For 3-tier Carton Clear For 4-tier Carton 4

31 ACCESSORIES Closure Plugs H31 CLOSURE PLUGS For use with Bell weatherproof boxes, extension adapters, cluster covers and round splice boxes to seal off unused outlets CLOSURE PLUGS PRODUCT FEATURES Gray closure plugs are zinc die cast White and bronze closure plugs are nonmetallic to to , Closure Plugs Gray 1/2" NPT 75 Polybags of 4 75 bags White 1/2" NPT 75 Polybags of 4 75 bags Bronze 1/2" NPT 75 Polybags of 4 75 bags Gray 1/2" NPT 12 Cards of 3 12 cards White 1/2" NPT 12 Cards of 3 12 cards Bronze 1/2" NPT 12 Cards of 3 12 cards Gray 1/2" NPT Bulk Gray 3/4" NPT 75 Polybags of 4 75 bags Gray 3/4" NPT 12 Cards of 3 12 cards Gray 3/4" NPT Bulk Gray 1" NPT 75 Polybags of 4 75 bags d i t d d c g g titi o ot i c d i t d d c g c d titi o ot i c

32 H32 ACCESSORIES Replacement Gaskets Replacement gaskets for Bell weatherproof covers and lampholders. Each gasket has cut outs for a toggle switch, duplex receptacle and 1.406" dia. round receptacle Remove the cut outs for the duplex and round receptacles for a GFCI receptacle opening CAT. NO Rectangular Box/Cover Gaskets Black 1-Gang 20 Cello bags of Black 2-Gang 20 Cello bags of Black 1 Gang cover gasket, 4 Lampholder g a s ke t s & 1 Round cover gasket 20 Cello bags 20 CAT. NO CAT. NO