Table of Contents. Specialty Hardware

Transcription

1 Copyright , Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited. Patent pending and/or patent

2 Table of Contents HP Series Bored Lock with Push/Pull ALP Trim /115 Series Push/Pull Trim /7800 Features Series with BHW Trim Series with BHL Trim Series with Push/Pull Trim (ALP) Series with Push/Pull Trim (PT) Series with Behavioral Health Knob Trim (BHD) Series with Behavioral Health Knob Trim for High Security (BHD) Functions & Descriptions Electrical Functions and Requirements...16 Power Supplies and Requirements...17 Turns, Emergency Releases and Indicators...18 Cylinders and Rosettes Strikes and Fronts & Screw Packs...21 Cylinder & Mechanical Options How To Order & Finishes...24 Handing Information /7800 and HP Certifications...26 Multi-Functional Lockbody & Architectural Specifications As part of their promise to provide innovative solutions to their customers, certain ASSA ABLOY Group brands offer the LiteGuide system, a luminescent egress marking system. LiteGuide installation is facilitated by ASSA ABLOY s ElectroLynx, a universal quick-connect system that simplifies the electrification of the door. ElectroLynx is a registered trademark of ASSA ABLOY Inc. MicroShield As part of their promise to provide innovative solutions to their customers, certain ASSA ABLOY Group brands offer the MicroShield technology, a silver-based antimicrobial coating designed to inhibit the growth of bacteria. MicroShield is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company. Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings. MicroShield Coating Revolutionary finish coating available on all SARGENT product lines, utilizes a silver-based antimicrobial compound from Agion Technologies As an integral part of the finish coating, MicroShield lasts for the life of the hardware MicroShield coating permanently suppresses the growth of bacteria, algae, fungus, mold and mildew. It is effective against a broad spectrum of bacteria. Non-toxic and completely safe. The Agion antimicrobial compound is EPA and NSF approved and FDA listed for use in medical and food preparation equipment. Applications: Anywhere there is need for a clean environment (hospitals, laboratories, schools, medical centers, daycare, food processing etc.)

3 HP Series Bored Lock with Push/Pull ALP Trim HP Bored Lock with Push/Pull Trim The HP Series Bored Lock with ALP push/pull trim provides an aestheticallypleasing alternative to standard push/pull products. Ease of operation allows its use in many environments, including healthcare and education. The paddle shape and location create a comfortable target for door activation without using hands. 5.27in [134mm] 6.00in [152mm] 2.75in [70mm] How To Order SG- HP U65 ALP 32D RHR Option Series Function Trim Finish Hand Mechanical Options this page HP Series Bored Locks U15 - Passage U65 - Privacy Push/Pull Trim Always specify hand of lock - 15 function is Non-Handed - 5" Backset standard with square corner front, 2-1/4" x 1-1/8" 03, 04, 09, 10, 10B, 10BE, 10BL, 14,15, 20D, 32 & 32D RHR LHR RH LH 2.80in [71mm] Features Paddle trim can be mounted in horizontal (up or down) or vertical (sideways) orientations in the field Easy installation 15 function trim is non-handed; lockbody is easily field reversible Through-bolted trim for stability Available in 2-3/4", 5" or 7" backsets UL Fire Rating standard Torx and spanner screws optional with ALP Lead lining is optional: specify 74- option Covers and paddles are cast stainless steel or brass Finishes: 03, 04, 09, 10, 10B, 10BE, 10BL, 14, 15, 20D, 32 and 32D Patent pending and/or patent Series and Function HPU15 Passage Set HPU65 Privacy Set Descriptions - Both paddles retract latch - Ideal for patient rooms and closets - I/S paddle always retracts latch - O/S paddle retracts latch, except when locked by inside push button - Closing door unlocks outside paddle - Includes emergency release - Ideal for bathrooms - Vertical orientation required Specifications Door Thickness 1-3/4" (44mm) to 1-7/8" (47mm) standard; for doors greater than 1-7/8" (47mm) to 2-1/4" (57mm), specify 31- and door thickness (For thicker doors, consult factory) Backset 5" (127mm) standard. For 2-3/4" (70mm) backset (specify as 24-HP) and 7" (177mm) backset (specify as 26-HP) available on order Strike 2-3/4" (70mm) ANSI A115.2 curved lip strike # 800 Bolt Brass, 1/2" (13mm) throw Hand Escutcheons UL Listed Options Specify hand (RHR, RH, LHR or LH) Cast stainless steel or brass UL Listed for use on fire doors (4x10 opening) Backsets /4" (70mm) backset 26-7" (177mm) backset Full Lip Strike Strikes /8" (124mm) ANSI curved lip strike # 808 WBS- Wrought Box Strike Security Screws 36-6-Lobe Security Head Screws 37- Spanner Security Head Screws Lead Lining 74- Lead lined. Specify Push or Pull side Antimicrobial Coating SG- MicroShield Antimicrobial clear powder coat (only available with 15 and 32D finishes) Markers P- Push/Pull Paddle Identification (non-handed) Finishes 03, 04, 09, 10, 10B, 10BE, 10BL, 14, 15, 20D, 32 & 32D For other finishes consult factory Finish Protection CPC- Clear Powder Coat Door Prep ANSI A115.1 modified per SARGENT standard bored template

4 114/115 Series Push/Pull Trim Designed for convenience and utility, the 114/115 hospital latches open with a gentle pull or slight push, making them ideal for hands free operation. Both the 114 push-pull and 115 push-pull latch with its low profile helps eliminate any obstruction while passing through an opening. Slim tapered paddles and smartly styled escutcheons possess all the elements of tasteful, yet functional design. The chassis design makes this hospital latch constructed for both durability and ease of install. Specifications For Doors 1-3/4" (44mm) to 2-1/4" (57mm) Backset 5" (127mm) standard. For 2-3/4" (70mm) backset (specify as ) and 7" (177mm) backset (specify as ) available on order Strike 2-3/4" (70mm) ANSI A115.2 curved lip strike # 800 Bolt Hand Brass, 1/2" (13mm) throw Specify hand (RHR, RH, LHR or LH) 114 Push/Pull Paddles - both mounted down position only. Cast; Projection from door 3-1/4" (83mm) 115 Push Paddle - mounted up position only. Cast; 1-5/8" (41mm) x 4-1/2" (114mm); Projection from door 2-1/2" (64mm) 115 Pull Paddle - mounted down position only. Cast; 1-5/8" x 4-3/4"; Projection from door 2-15/16" Escutcheons UL Listed Cold drawn; 2-1/2" (64mm) x 6-7/8" (175mm) UL Listed for use on fire doors. See Underwriters Laboratories Building Materials List Options Backsets Strike Security Screws /4" (70mm) backset 26-7" (177mm) backset /8" (124mm) ANSI curved lip strike # 808 WBS- Wrought Box Strike 36-6-Lobe Security Head Screws 37- Spanner Security Head Screws Lead Lining 74- Lead lined. Specify Push or Pull side Finishes 114 Push-Pull 115 Push-Pull 114 latches are mounted in the down position as shown and are available with PUSH and PULL stamped into the top of the escutcheon. 2 Antimicrobial Coating SG- MicroShield Antimicrobial clear powder coat (only available with 15 and 26D finishes) Push/Pull Marking P- P- Push/Pull to be stamped on each escutcheon Through Bolts TB- Through-bolt pack, specify door thickness: 1-3/4", 2" & 2-1/4" 03, 04, 09, 10, 10B, 10BE, 15, 26, 26D For other finishes consult factory Designed for convenience and utility, the 114/115 hospital latches open with a gentle pull or slight push, making them ideal for hands free operation. Both the 114 push-pull and 115 push-pull latch with its low profile helps eliminate any obstruction while passing through an opening. Slim tapered paddles and smartly styled escutcheons possess all the elements of tasteful, yet functional design. The chassis design makes this hospital latch constructed for both durability and ease of install.

5 8200/7800 Mortise Lock Features The patented SARGENT Mortise Locks are designed and constructed with high quality components to provide maximum security, performance and durability. These locks represent over a century of innovation and experience in manufacturing hardware and are the industry s benchmark for mortise locks: Strong - Durable - Flexible Innovative and Secure with ALP trim shown Outside front plate: 1/16" (1.6mm) brass, bronze or stainless steel. Adjustable for door bevels from flat to 1/8" (3mm) in 2" (51mm) 3/4" (19mm) projection stainless steel one-piece latchbolt, reversible without opening case. Anti-friction piece is securely staked in place for quiet operation and prevents scratching of strike plate Non-handed stainless steel auxiliary deadlatch Cylinder retainer-two prong grip meets Security Grade 1 Extra strong 7/64" (3mm) steel case for improved impact resistance 6-pin solid brass cylinder standard; multiple keying systems available Heavy gauge corrosion resistant parts through out provide security, reliability, durability and longevity Inside front: 1/8" (3mm) cold rolled steel holds lock securely in door Patent pending and/or patent Heavy duty hubs and spring cartridge with in the lockbody for superior strength and cycle life 8200 & 7800 Lockbody Dimensions OUTSIDE FRONT ATTACHING SCREW 8" C L OF DEADBOLT 1-1/32" 4" 1-3/16" 5/8" 11/32" 7/16" 1-1/4" 5/8" C L OF LATCHBOLT C L OF DEADLATCH 3-5/8" 7-1/4" FLAT TO 1/8" IN 2" FRONT BEVEL 5-31/32" 1 1/32" 1-1/4" 1" 1/2" 3/4" 1" 7/32" 27/64" 4 3/32" 2-3/4" BACKSET C L OF LOCK FRONT 5/8" 2-15/32" 27/32" 1-51/64" 2-3/16" 3-7/8" 3

6 8200 Series with BHW* Trim 8200 Series with BHW Trim Part of the Behavioral Health Series of products, the 8200 mortise lock with BHW trim provides an innovative solution for behavioral health environments. The unique integrated lever and escutcheon combines aesthetics with safety. Ease of operation, along with the strength and versatility of the 8200 mortise lock allows its use in many applications. 2-1/4" (56mm) 7-1/4" (183mm) How To Order SG BHW 32D RHR Option Series Function Trim Finish Hand Mechanical Options this page Cylinder Options page Series Mortise Locks See pages Lever & Escutcheon 32 or 32D RHR LHR RH LH 7-1/2" (190mm) Features ANSI/BHMA Grade 1 Available in 37 functions Uses standard mortise prep Easy installation Tapered surfaces on all components ADA Compliant Specifications Door Thickness Backset Packaging 8205 x BHW approx. 6.1 lbs. (2.7kg)/box 4 Available with MicroShield, an antimicrobial coating 6 Lobe head security screws (Torx type) are standard with BHW Trim Matching thumbturn available Finishes: 32 and 32D Trim only option available with existing sectional and escutcheon trim only Handed 1-3/4" (44mm) to 1-7/8" (47mm) standard; for doors greater than 1-7/8" (47mm) to 2-1/4" (57mm), specify 31- and door thickness (For thicker doors, consult factory) 2-3 4" (70mm) only Case 12 gauge heavy duty wrought steel, zinc dichromate plated. Thickness 7/64" (3mm) (.109") Outside Front Plate Trim only kits: Trim only, non-keyed functions (BHW Trim only) Trim only, single cylinder functions (BHW Trim only) Trim only, double cylinder (BHW Trim only) Patent pending and/or patent Brass, bronze or stainless steel. 8" (203mm) x 1-1 4" (31mm), ANSI Standard A Adjustable at any angle from flat to beveled 1 8" (3mm) in 2" (51mm) Springs High carbon steel Latchbolt Stainless steel 3 4" (19mm) projection one-piece, anti-friction reversible latch Auxiliary Deadlatch Stainless steel, non-handed Deadbolt One-piece hardened stainless steel, with 1" (25mm) projection Hand Handed - Must specify hand on order Mechanical Options Cylinders Cylinder Options see page /8" (124mm) ANSI Strike with 1-1/8" (29mm) Flat Lip Strikes OBS- Open Back Strike WBS- Wrought Box Strike Thick Doors 31- For doors thicker than 1-7/8" to 2-1/4"; specify 31- and door thickness DX- Deadbolt monitoring - Monitor deadbolt position (not available with LX-) Electrical Options LX- Latchbolt monitor - Monitors latchbolt position (not available with deadbolt functions) RX- Request to Exit - Monitors each lever independently Lead Lining 74- Lock case wrapped in lead (specify hand) Strike Keys Masterkeying Stile Door Prep Antimicrobial Coating SG- MicroShield - antimicrobial clear powder coat (available with 32D finish only) Brass, bronze or stainless steel; ANSI Standard A115.1; curved lip, non-handed (strike box optional) Two, nickel silver (control key or emergency key must be ordered when required) #41 (1-1/8") cylinder supplied standard Can be masterkeyed or grand masterkeyed. Construction keying available 4-1/2" (114mm) minimum stile ANSI A115.1 modified per SARGENT standard mortise template A4711 * Although these products are better designed for behavioral health applications than traditional trim, they do not eliminate the risk that an object can be affixed to, or around them.

7 8200 Series with BHL* Trim 8200 with BHL Trim The SARGENT BHL trim is part of the Behavioral Health Series of products. With an array of functions, this trim can be used on virtually any opening in healthcare applications. Sloping surfaces and overlapping rose and lever address safety concerns common in behavioral health. Optimal for tough environments, the SARGENT 8200 mortise lock provides impressive strength and reliability. 6" (152mm) 3" (76mm) How To Order SG BHL 32D LH Option Series Function Trim Finish Hand Mechanical Options this page Cylinder Options page Series Mortise Locks See pages BHL 32 or 32D RHR LHR RH LH 2-1/4" (56mm) Features Available in 22 functions UL Fire Rated ANSI/BHMA Grade 1 Bi-directional lever (outside only) Sloped surfaces Concealed hardware Specifications Door Thickness Backset Packaging 8205 x BHL approx. 6.1 lbs. (2.7kg)/box 6 boxes/case Overlapping lever and rose construction ADA compliant 6 Lobe head security screws (Torx type) are standard with BHL Trim 1-3/4" (44mm) to 1-7/8" (47mm) standard; for doors greater than 1-7/8" (47mm) to 2-1/4" (57mm), specify 31- and door thickness (For thicker doors, consult factory) 2-3/4" (70mm) only Case 12 gauge heavy duty wrought steel, zinc dichromate plated. Thickness 7/64" (3mm) (.109") Outside Front Plate Springs Latchbolt Auxiliary Deadlatch Deadbolt Hand Non-handed Finishes: 32 and 32D Available with MicroShield, an antimicrobial coating Brass, bronze or stainless steel. 8" (203mm) x 1-1/4" (31mm), ANSI Standard A Adjustable at any angle from flat to beveled 1/8" (3mm) in 2" (51mm) High carbon steel Stainless steel 3/4" (19mm) projection one-piece, anti-friction reversible latch Stainless steel, non-handed One-piece hardened stainless steel, with 1" (25mm) projection Non-handed Mechanical Options Cylinders Cylinder Options see page 18 Strike Keys Masterkeying Stile Door Prep Strikes /8" (124mm) ANSI Strike with 1-1/8" (29mm) Flat Lip OBS- WBS- Open Back Strike Wrought Box Strike Thick Doors 31- For doors thicker than 1-7/8" to 2-1/4"; specify 31- and door thickness Security Screws 37- Spanner head security screws (available with front plate and strike only) Lead Lining 74- Lock case wrapped in lead (specify hand) Antimicrobial Coating SG- MicroShield - antimicrobial clear powder coat (available with 32D only) Electrical Options DX- LX- Deadbolt monitoring - Monitor deadbolt position (not available with LX-) Latchbolt monitor - Monitors latchbolt position (not available with deadbolt functions) Brass, bronze or stainless steel; ANSI Standard A115.1; curved lip, non-handed (strike box optional) Two, nickel silver (control key or emergency key must be ordered when required) #41 (1-1/8") cylinder supplied standard Can be masterkeyed or grand masterkeyed. Construction keying available 4-1/2" (114mm) minimum stile ANSI A115.1 modified per SARGENT standard mortise template A7057 * Although these products are a better design for behavioral health applications than traditional trim, they do not eliminate the risk that an object can be affixed to, or around them. 5

8 8200 Series with Push/Pull Trim (ALP) 8200 Series with Push/Pull Trim (ALP) The 8200 mortise lock with push/pull trim provides an aestheticallypleasing alternative to standard push/pull products. Ease of operation, along with the strength, versatility and integrity of the 8200 mortise lock, allows its use in many types of environments. Perfect for health care facilities, including behavioral health units, patient room doors and operating rooms. 2.80in [71mm] Features 5.27in [134mm] Paddle trim can be mounted in horizontal (up or down) and vertical (sideways) orientations in the field Easy installation Trim is non-handed; lockbody is easily field reversible Through-bolted trim for stability Specifications Door Thickness Packaging 6.00in [152mm] 2.75in [70mm] 8205 x ALP approx. 6.1 lbs. (2.7kg)/box 6 boxes/case How To Order 1-3/4" (44mm) to 1-7/8" (47mm) standard; for doors greater than 1-7/8" (47mm) to 2-1/4" (57mm), specify 31- and door thickness (for thicker doors, consult factory) Backset 2-3/4" (70mm) only Case 12 gauge heavy duty wrought steel, zinc dichromate plated. Thickness 7/64" (3mm) (.109") SG ALP 32D LHR Option Series Function Trim Finish Hand Mechanical Options this page 8200 Series Mortise Locks NOTE: ALP trim requires a special 8200 mortise lock body, which is shipped automatically when ALP is specified. When ordering a lock body only for use with ALP trim, please refer to your SARGENT Price Book for the correct ordering number. Torx and spanner screws optional with ALP Lead lining is optional (Lockbody only), specify 74- option Covers are cast stainless steel or brass Paddles are cast stainless steel or brass Finishes: 03, 04, 09, 10, 10B, 10BE, 10BL, 14, 15, 20D, 32 and 32D Patent pending and/or patent Outside Front Plate Brass, bronze or stainless steel. 8" (203mm) x 1-1/4" (31mm), ANSI Standard A Adjustable at any angle from flat to beveled 1/8" (3mm) in 2" (51mm) Springs High carbon steel Latchbolt Stainless steel 3/4" (19mm) projection one-piece, anti-friction reversible latch Auxiliary Deadlatch Stainless steel, non-handed Deadbolt One-piece hardened stainless steel, with 1" (25mm) projection Hand Specify hand on order; easily field reversible Mechanical Options Cylinders Cylinder Options see page /8" (124mm) ANSI Strike with 1-1/8" (29mm) Flat Lip Strikes OBS- Open Back Strike WBS- Wrought Box Strike Thick Doors 31- For Doors Thicker than 1-7/8" to 2-1/4"; specify 31- and door thickness Security Screws 36-6 Lobe head security screws (Torx type) 37- Spanner head security screws Indicators 49- Visual Status Indicator or Occupancy Indicator w/emergency Release 50- Secured Indicator Lead Lining 74- Lock case wrapped in lead (specify hand) Antimicrobial Coating SG- MicroShield - antimicrobial clear powder coat (only available with 15 and 32D finishes) Markers P- Push/Pull Paddle Identification (Non-handed) Strike Brass, bronze or stainless steel; ANSI Standard A115.1; curved lip, non-handed (strike box optional) Keys Two, nickel silver (control key or emergency key must be ordered when required) #41 (1-1/8") cylinder supplied standard Masterkeying Can be masterkeyed or grand masterkeyed. Construction keying available Stile 4-1/2" (114mm) minimum stile Door Prep ANSI A115.1 modified per SARGENT standard mortise template A Cylinder Options page 21 See pages Lever 03, 04, 09, 10, 10B, 10BE, 10BL, 14, 15, 20D, 32 or 32D RHR LHR RH LH

9 7800 Series with Push/Pull Trim (PT) 7800 Push/Pull Trim (PT) The Push/Pull design known for its ease of operation is coupled with the strength and integrity of a mortise lock to provide greater versatility. The trim, commonly used in hospitals and health care facilities, can now service conference rooms, handicapped restrooms, laboratories and pharmaceutical facilities that require more durability and security features than a cylindrical lock can provide. 2-3/4" (70mm) 4-5/8" (117mm) 1-1/2" (38mm) How To Order SG PT 32D LH Option Series Function Trim Finish Hand Mechanical Options this page Cylinder Options page Series Mortise Locks See pages Push/Pull Trim 03, 04, 09, 10, 10B, 10BE, 10BL, 20D, 32 or 32D RHR LHR RH LH Features 1-7/8" (48mm) 2-3/4" (70mm) 4-1/2" (114mm) Spindle centered in escutcheon 7837 PT Horizontal Mount Shown NOTE: The PT trim is always supplied with an 7800PT mortise lockbody, all mortise lockbodies are labeled for ease of identification. When ordering lockbody only for PT trim, always specify 7800PT lockbody. Paddle trim orientation can be mounted in vertical (up or down) and horizontal positions as a standard product, no need for specifying mount positions on order Down or horizontal paddle orientation is required for cylinder side of door Horizontal paddle orientation is required if thumb turn or a emergency release is used Patent pending and/or patent Easy installation Handing is easily field reversible Through-bolted trim for stability 6 Lobe security type screws (Torx ) standard for PT trim Engraving on paddle consult factory Lead lining is optional (Lockbody only), specify 74- option Covers are heavy wrought stainless steel, brass or bronze Paddles are cast stainless steel, brass or bronze Finishes: 3, 4, 9, 10, 10B, 10BE, 10BL, 20D, 32, 32D Specifications For Doors Backset Door thickness 1-3/4" (44mm) to 2" (51mm) standard with adaptable spindle. For thicker doors, consult factory " (70mm) only Case 12 gauge heavy duty wrought steel, zinc dichromate plated. Thickness 7/64" (3mm) (.109") Outside Front Plate Springs Latchbolt Auxiliary Deadlatch Deadbolt Hand Mechanical Options Strike Keys Masterkeying Stile Door Prep Brass, bronze or stainless steel. 8" (203mm) x 1-1/4" (31mm), ANSI Standard A Adjustable at any angle from flat to beveled 1/8" (3mm) in 2" (51mm) 1/8" (3mm) in 2" (51mm) High carbon steel Stainless steel 3/4" (19mm) projection one-piece, anti-friction reversible latch Stainless steel, non-handed One-piece hardened stainless steel, with 1" (25mm) projection Specify hand on order; easily field reversible Cylinders Cylinder Options see page /8" (124mm) ANSI Strike with 1-1/8" (29mm) Flat Lip Strikes OBS- Open Back Strike WBS- Wrought Box Strike Security Screws 37- Spanner head security screws DX- Deadbolt monitoring - Monitor deadbolt position (not available with LX-) Electrical Options LX- Latchbolt monitor - Monitors latchbolt position (not available with deadbolt functions) RX- Request to Exit - Monitors each lever independently Lead Lining 74- Lock case wrapped in lead (specify hand) Antimicrobial Coating SG- MicroShield - antimicrobial clear powder coat (available with 32D finish only) Brass, bronze or stainless steel; ANSI Standard A115.1; curved lip, non-handed (strike box optional) Two, nickel silver (control key or emergency key must be ordered when required) Can be masterkeyed or grand masterkeyed. Construction keying available 5" (127mm) minimum stile for 7800 Push/Pull Trim ANSI A115.1 modified per template (see template 4512 only) 7

10 7800 Series with BHD* Trim 7800 Series with BHD Trim How To Order 3" (76mm) 3" (76mm) SG BHD 32D Option Series Function Trim Finish Mechanical Options this page Cylinder Options page Series Mortise Locks See pages Knob 32 or 32D Features Available in 36 functions UL Fire Rated ANSI/BHMA Grade 1 Sloped surfaces on all components Overlapping knob and rose construction Finishes: 32 and 32D Available with MicroShield option, antimicrobial coating Specifications Door Thickness 1-3/4" (44mm) to 1-7/8" (47mm) standard; for doors greater than 1-7/8" (47mm) to 2-1/4" (57mm), specify 31- and door thickness (for thicker doors, consult factory) Backset * Although these products are a better design for behavioral health applications than traditional trim, they do not eliminate the risk that an object can be affixed to, or around them. Packaging 7837 x BHD approx. 6.1 lbs. (2.7kg)/box 6 boxes/case 8 2-3/4" (70mm) only Case 12 gauge heavy duty wrought steel, zinc dichromate plated. Thickness 7/64" (3mm) (.109") Outside Front Plate Springs Latchbolt Auxiliary Deadlatch Deadbolt Hand Brass, bronze or stainless steel. 8" (203mm) x 1-1/4" (31mm), ANSI Standard A Adjustable at any angle from flat to beveled 1/8" (3mm) in 2" (51mm) High carbon steel Stainless steel 3/4" (19mm) projection one-piece, anti-friction reversible latch Stainless steel, non-handed One-piece hardened stainless steel, with 1" (25mm) projection Non-handed Mechanical Options Cylinders Cylinder Options see page 18 Strike Keys Masterkeying Stile Door Prep Strikes Lever/Knob Combination /8" (124mm) ANSI Strike with 1-1/8" (29mm) Flat Lip OBS- WBS- Open Back Strike Wrought Box Strike 67- Lock furnished w/ knob both sides (Not available with AV-Option) 68- Lock furnished w/ lever handle outside x knob inside (Not available with AV- Option) 69- Lock furnished w/ lever handle inside x knob outside (Not available with AV-Option) Thick Doors 31- For Doors Thicker than 1-7/8" to 2-1/4"; specify 31- and door thickness Security Screws Electrical Options 36-6 Lobe head security screws (Torx type) 37- Spanner head security screws DX- LX- Deadbolt monitoring - Monitor deadbolt position (not available with LX-) Latchbolt monitor - Monitors latchbolt position (not available with deadbolt functions) Lead Lining 74- Lock case wrapped in lead (specify hand) Antimicrobial Coating SG- MicroShield - antimicrobial clear powder coat (available in 32D only) Brass, bronze or stainless steel; ANSI Standard A115.1; curved lip, non-handed (strike box optional) Two, nickel silver (control key or emergency key must be ordered when required) #41 (1-1/8") cylinder supplied standard Can be masterkeyed or grand masterkeyed. Construction keying available 4-1/2" (114mm) minimum stile ANSI A115.1 modified per SARGENT standard mortise template A7057

11 9200 Series with BHD* Trim for High Security 9200 Series with BHD Trim for High Security How To Order The 9200 Series with BHD Trim is designed to provide additional safety on SG BHD 32D openings that withstand extreme abuse, vandalism and malicious impact. It is well-suited for Psychiatric and minimum security detention facilities, as Option Series Function Trim Finish well as exposed perimeter doors in commercial facilities. 3" (76mm) Mechanical Options this page 9200 Series Mortise Locks See pages Knob 32 or 32D 3" (76mm) Features Available in 26 functions UL Fire Rated ANSI/BHMA Grade 1 Sloped surfaces on all components Overlapping knob and rose construction Finishes: 32 and 32D Available with MicroShield option, antimicrobial coating option Specifications Door Thickness Backset 1-3/4" (44mm) to 1-7/8" (47mm) standard; for doors greater than 1-7/8" (47mm) to 2-1/4" (57mm), specify 31- and door thickness (For thicker doors, consult factory) 2-3/4" (70mm) only Case 12 gauge heavy duty wrought steel, zinc dichromate plated. Thickness 7/64" (3mm) (.109") Outside Front Plate Brass, bronze or stainless steel. 8" (203mm) x 1-1/4" (31mm), ANSI Standard A Adjustable at any angle from flat to beveled 1/8" (3mm) in 2" (51mm) Springs High carbon steel Latchbolt Stainless steel 3/4" (19mm) projection one-piece, anti-friction reversible latch Auxiliary Deadlatch Stainless steel, non-handed Deadbolt One-piece hardened stainless steel, with 1" (25mm) projection Hand Non-handed Mechanical Options Cylinders Cylinder Options see page /8" (124mm) ANSI Strike with 1-1/8" (29mm) Flat Lip Strikes OBS- Open Back Strike WBS- Wrought Box Strike 67- Lock furnished w/ knob both sides (Not available with AV-Option) Lever/Knob Combination 68- Lock furnished w/ lever handle outside x knob inside (Not available with AV- Option) 69- Lock furnished w/ lever handle inside x knob outside (Not available with AV-Option) Thick Doors 31- For Doors Thicker than 1-7/8" to 2-1/4"; specify 31- and door thickness Security Screws 36-6 Lobe head security screws (Torx type) 37- Spanner head security screws Lead Lining 74- Lock case wrapped in lead (specify hand) Strike Keys Masterkeying Stile Door Prep Packaging Antimicrobial Coating SG- MicroShield - antimicrobial clear powder coat (available in 32D only) Brass, bronze or stainless steel; ANSI Standard A115.1; curved lip, non-handed (strike box optional) Two, nickel silver (control key or emergency key must be ordered when required) #41 (1-1/8") cylinder supplied standard Can be masterkeyed or grand masterkeyed. Construction keying available 4-1/2" (114mm) minimum stile ANSI A115.1 modified per SARGENT standard mortise template A x BHD approx. 6.1 lbs. (2.7kg)/box 6 boxes/case * Although these products are a better design for behavioral health applications than traditional trim, they do not eliminate the risk that an object can be affixed to, or around them. 9

12 9200 Series with BHW Trim for High Security 9200 Series with BHW Trim for High Security How To Order The 9200 Series with BHW Trim is designed to provide additional safety on SG BHW 32D openings that withstand extreme abuse, vandalism and malicious impact. It is well-suited for Psychiatric and minimum security detention facilities, as Option Series Function Trim Finish well as exposed perimeter doors in commercial facilities. 2-1/4" (56mm) 7-1/4" (183mm) Mechanical Options this page 9200 Series Mortise Locks See pages Knob 32 or 32D 7-1/2" (190mm) Features ANSI/BHMA Grade 1 Available in 26 functions Uses standard mortise prep Trim Only option available with existing sectional and escutcheon trim only Tapered surfaces on all components Specifications Door Thickness Backset Packaging 9237 x BHD approx. 6.1 lbs. (2.7kg)/box 10 Available with MicroShield, an antimicrobial coating ADA Compliant 6 Lobe head security screws (Torx type) are standard with BHW Trim Matching thumbturn available Finishes: 32 and 32D Handed 1-3/4" (44mm) to 1-7/8" (47mm) standard; for doors greater than 1-7/8" (47mm) to 2-1/4" (57mm), specify 31- and door thickness (For thicker doors, consult factory) 2-3 4" (70mm) only Case 12 gauge heavy duty wrought steel, zinc dichromate plated. Thickness 7/64" (3mm) (.109") Outside Front Plate Trim only kits: Trim only, non-keyed functions (BHW Trim only) Trim only, single cylinder functions (BHW Trim only) Trim only, double cylinder (BHW Trim only) Patent pending and/or patent Brass, bronze or stainless steel. 8" (203mm) x 1-1 4" (31mm), ANSI Standard A Adjustable at any angle from flat to beveled 1 8" (3mm) in 2" (51mm) Springs High carbon steel Latchbolt Stainless steel 3 4" (19mm) projection one-piece, anti-friction reversible latch Auxiliary Deadlatch Stainless steel, non-handed Deadbolt One-piece hardened stainless steel, with 1" (25mm) projection Hand Handed - Must specify hand on order Mechanical Options Cylinders Cylinder Options see page /8" (124mm) ANSI Strike with 1-1/8" (29mm) Flat Lip Strikes OBS- Open Back Strike WBS- Wrought Box Strike Thick Doors 31- For doors thicker than 1-7/8" to 2-1/4"; specify 31- and door thickness DX- Deadbolt monitoring - Monitor deadbolt position (not available with LX-) Electrical Options LX- Latchbolt monitor - Monitors latchbolt position (not available with deadbolt functions) RX- Request to Exit - Monitors each lever independently Lead Lining 74- Lock case wrapped in lead (specify hand) Strike Keys Masterkeying Stile Door Prep Antimicrobial Coating SG- MicroShield - antimicrobial clear powder coat (available with 32D finish only) Brass, bronze or stainless steel; ANSI Standard A115.1; curved lip, non-handed (strike box optional) Two, nickel silver (control key or emergency key must be ordered when required) #41 (1-1/8") cylinder supplied standard Can be masterkeyed or grand masterkeyed. Construction keying available 4-1/2" (114mm) minimum stile ANSI A115.1 modified per SARGENT standard mortise template A4711 * Although these products are a better design for behavioral health applications than traditional trim, they do not eliminate the risk that an object can be affixed to, or around them.

13 Functions & Descriptions Available Functions for BHD x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 7800 PT x x x x x x x x x x x x x 8200 ALP x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 8200 BHL x x x x x x x x x x x x x x x x x x x x x 8200 BHW x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 9200 BHD x x x x* x x x x x x x x x x x* x x x* x x x* x* x x* x* x* x* 9200 BHW x x x x x x x x x x x x x x x x x x x x x x x x x M9200BHW x x x x x x x x x x x x x x x x x HP ALP x x * Not available with Mogul Cylinder (M-option) Single Cylinder without Deadbolt 04 Storeroom or Closet Key outside retracts latchbolt Trim outside locked at all times Trim inside always retracts latchbolt A Multi-Function Lock Body ANSI F07 F36 Closet Key locks and unlocks trim No inside trim or cylinder A Multi-Function Lock Body Auxiliary dead latch *05 Office or Entry 37 Classroom Key outside retracts latchbolt, also locks and Key outside retracts latchbolt, also locks unlocks outside trim and unlocks outside trim Trim inside always retracts latchbolt, trim Trim inside always retracts latchbolt outside remains locked Thumbturn inside locks and unlocks outside trim A Multi-Function Lock Body ANSI F05 A Multi-Function 8200 ALP/7800 PT Lock Body ANSI F04 The Multi-Function Advantage: function can be used as an 04, 15 and 37 functions without additional parts. 2. By adding an additional cylinder, an 05 function can be used as a 38 function lock. 3. By adding a Trim One Side Kit, an 05 function can be used as an 06, 13, 31 and 36 functions (Not available with 7800PT). 06 Storeroom or Service No trim outside, cylinder only Key outside retracts latchbolt Trim inside always retracts latchbolt Same as 04 Function without trim outside FCAUTION: Not recommended for use on any door used for Life Safety egress If shaded, trim rigid at all times NOTE: Paddle orientation on this page is only a representation; all functions can be used with levers or paddles. 55 Office or Entry Key outside retracts latchbolt Trim inside always retracts latchbolt, outside trim remains locked Trim outside is locked and unlocked by the toggle only 56 Office & Inner Entry Lock Key outside retracts latchbolt Trim inside always retracts latchbolt and unlocks outside trim Trim outside is locked by thumbturn or key 11

14 Functions & Descriptions Single Cylinder with Deadbolt F31 Utility F24 Room Door Key outside retracts latchbolt Trim outside is always locked No inside trim or cylinder A Multi-Function Lock Body Key outside or thumbturn inside retracts and projects deadbolt Trim either side retracts latchbolt Latchbolt and deadbolt operate independently of each other ANSI F21 67 Institutional Privacy Key outside retracts latchbolt, overriding thumbturn when held in locked position Thumbturn inside locks and unlocks outside trim Trim outside unlocks when the door closes or by operating trim inside Trim inside always retracts latchbolt ANSI F26 NOTE: Key does not lock trim outside, only unlocks it 30 Dummy Trim Deadlock Deadbolt operation only Key outside retracts and projects deadbolt Trim inside always retracts deadbolt Trim outside is always locked Same as 28 Function without a thumbturn 25 Dormitory or Exit Key outside or thumbturn inside retracts and projects deadbolt Trim from either side retracts latchbolt, when the deadbolt is in the retracted position Trim outside is locked, when the deadbolt is projected When deadbolt is projected, Trim inside retracts latchbolt and deadbolt simultaneously, unlocking outside trim ANSI F13 F27 Closet or Storeroom Key outside retracts and projects deadbolt Trim from either side retracts latchbolt Same as 24 function without thumbturn Latchbolt and deadbolt operate independently of each other 28 Dummy Trim Deadlock Deadbolt operation only Key outside retracts and projects deadbolt Trim inside always retracts deadbolt Trim outside is always locked Thumbturn inside retracts and projects deadbolt FCAUTION: Not recommended for use on any door used for Life Safety egress If shaded, trim rigid at all times 12 F35 Storeroom Key outside retracts and projects deadbolt Trim outside retracts latchbolt, except when deadbolt is projected No inside trim or cylinder 43 Apartment Corridor Door Key and thumbturn both retract and project the deadbolt Trim outside is locked by toggle or projecting deadbolt Trim outside is unlocked by toggle only Key retracts both latchbolt and deadbolt, trim outside remains locked Trim inside always retracts latchbolt (and deadbolt simultaneously), trim outside remains locked ANSI F20

15 Functions & Descriptions 45 Dormitory or Exit Key and thumbturn both retract and project deadbolt Trim outside is locked by toggle or projecting deadbolt Trim outside is unlocked by toggle only Key retracts both latchbolt and deadbolt, trim outside remains locked Trim inside always retracts latchbolt (and deadbolt simultaneously), trim outside remains locked Same as an 8243 without auxiliary deadlatch ANSI F12 F47 Front Door or Apartment Corridor Door Key and thumbturn both retract and project deadbolt Trim outside is locked by toggle or projecting deadbolt Trim outside is unlocked by toggle only Key retracts both latchbolt and deadbolt, trim outside remains locked Trim inside retracts latchbolt only, deadbolt is retracted manually and trim outside remains locked ANSI F08/F10 50 Hotel Guest Hotel Cylinder (50 Function) Required (Standard and Emergency Keys) Standard Key retracts latchbolt only, will not retract or project deadbolt Emergency Key will retract latchbolt and deadbolt and also project deadbolt Thumbturn retracts and projects deadbolt Trim inside retracts latchbolt and deadbolt simultaneously Trim outside is always locked Available with Conventional, LFIC (60- and 63-) and Keso (82- and F1-82-) key systems ANSI F15 51 Storeroom Deadbolt Key and thumbturn both retract and project the deadbolt Key will also retract latchbolt Trim inside retracts latchbolt and deadbolt simultaneously Trim outside is always locked Same as 50 function with a std cylinder Double Cylinder without Deadbolt 16 Apartment, Exit or Public Restroom Key outside retracts latchbolt Key inside is required to lock and unlock trim outside Trim inside always retracts latchbolt Special -105 cam, required for inside cylinder (supplied) ANSI F09 17 Asylum or Institutional Key from either side retracts latchbolt Trim on both sides are locked at all times ANSI F30 FCAUTION: Not recommended for use on any door used for Life Safety egress If shaded, trim rigid at all times 38 Classroom Security Intruder Latchbolt Key from either side locks and unlocks outside trim Key from either side retracts latchbolt Trim outside retracts latchbolt, except when locked Trim inside always retracts latchbolt ANSI F32 F 59 Double Locking Key from either side locks and unlocks both the inside and outside trims Key from either side retracts latchbolt Key from either side can retract latchbolt without unlocking trims NOTE: Paddle orientation on this page is only a representation of the product; all functions can be used with paddles in any orientation. 13

16 Functions & Descriptions Double Cylinder with Deadbolt F 26 Store Door 29 Dummy Trim Deadlock Deadbolt operation only Key on either side retracts and projects deadbolt Trim inside retracts deadbolt Trim outside is always locked 39 Classroom Security Intruder Deadbolt Key either side retracts or projects deadbolt which also unlocks or locks outside trim Trim outside retracts latchbolt, except when locked Trim outside is only locked by projecting the deadbolt Trim inside retracts both latchbolt and deadbolt simultaneously, and unlocks outside trim ANSI F33 F 48 Store Door 14 Key from either side retracts and projects deadbolt Trim from either side retracts latchbolt Latchbolt and deadbolt are independent of each other ANSI F14 Key from either side retracts and projects deadbolt Key from either side retracts latchbolt Trim outside is locked by toggle or projecting deadbolt and unlocked by toggle only Trim inside (when deadbolt is projected) retracts latchbolt only, and outside trim remains locked ANSI F25 FCAUTION: Not recommended for use on any door used for Life Safety egress If shaded, trim rigid at all times 40 Classroom Security Intruder Deadbolt Key either side retracts or projects deadbolt which also unlocks or locks outside trim Trim outside retracts latchbolt, except when locked Trim outside is only locked by projecting the deadbolt Trim inside retracts both latchbolt and deadbolt simultaneously, and unlocks outside trim Same as an 8239 with Auxiliary deadlatch ANSI F34 41 Classroom Security Intruder Deadbolt Key from either side retracts and projects deadbolt When deadbolt is projected, 1st key rotation retracts deadbolt, 2nd key rotation unlocks trim outside Key retraction of latchbolt from either side unlocks trim outside Trim outside retracts latchbolt, except when locked Trim inside (when deadbolt is projected) retracts both latchbolt and deadbolt simultaneously and the outside trim remains locked 46 Dormitory or Exit Key from either side retracts and projects deadbolt Key from either side retracts both latchbolt and deadbolt, trim outside remains locked Trim outside is locked by toggle or projecting deadbolt Trim outside is unlocked by toggle only Trim inside (when deadbolt is projected) retracts both latchbolt and deadbolt simultaneously and the outside trim remains locked F 49 Security Deadbolt Key from either side retracts and projects deadbolt Key from either side retracts latchbolt Trim inside and outside are locked only when deadbolt is projected F 52 Institutional Deadbolt Key from either side retracts and projects deadbolt Key from either side retract latchbolt Trim inside and out are always locked

17 Functions & Descriptions Non-Keyed 13 Exit Latch No outside trim or cylinder Trim inside retracts latchbolt A Multi-Function Lockbody ANSI F31 15 Passage or Closet Trim from either side retracts latchbolt at all times ANSI F01 65 Privacy Bath/Bedroom Trim outside retracts latchbolt except when locked by thumbturn Trim inside retracts latchbolt and unlocks outside trim Emergency Release locks/unlocks trim outside-by coin, screwdriver or Emergency key ( ) ordered separately. Thumbturn locks and unlocks trim outside Closing the door will unlock outside trim ANSI F22 66 Privacy Bath/Bedroom Trim outside retracts latchbolt except when deadbolt is projected Trim inside retracts both latchbolt and deadbolt simultaneously, unlocking the outside trim Emergency Release retracts and projects deadbolt-by coin, screw driver or Emergency key ( ) ordered separately Thumbturn retracts and projects deadbolt ANSI F19 FCAUTION: Not recommended for use on any door used for Life Safety egress If shaded, trim rigid at all times 68 Privacy Bath/Bedroom Trim from either side retracts latchbolt at all times Thumbturn retracts and projects deadbolt Emergency release retracts and projects deadbolt-by coin, screwdriver or Emergency key ( ) ordered separately Latchbolt and deadbolt are independent of each other ANSI F02 NOTE: Paddle orientation on this page is only a representation of the product; all functions can be used with paddles in any orientation. 15

18 Electrical Functions and Requirements SARGENT 8200 Electromechanical Mortise locks are designed to handle single opening, stand alone applications, or can be readily integrated into sophisticated access control systems. They meet ANSI/BHMA A Grade 1 requirements, are UL listed on fire doors, and satisfy industry standards for operating temperature, shock and fire hazard. Electromechanical Functions 70 Electrical (Fail Safe) 71 Electrical (Fail Secure) 70 function- Power ON, locks outside trim (by solenoid) 71 function- Power ON, unlocks outside trim (by solenoid) Always specify voltage: 12VDC or 24VDC Key outside retracts latchbolt Trim outside retracts latchbolt except when locked Trim outside can only be locked and unlocked with the solenoid Trim inside always retracts latchbolt F 72 Electrical (Fail Safe) F 73 Electrical (Fail Secure) 72 function- Power ON, locks both trims (by solenoid) 73 function- Power ON, unlocks both trims (by solenoid) Always specify voltage: 12VDC or 24VDC Key on either side retracts latchbolt Trim from either side retracts latchbolt, except when trims are locked Both trims can be locked and unlocked with the solenoid Trim can not be locked separately, only together FCAUTION: Not recommended for use on any door used for Life Safety egress NOTE: Paddle orientation on this page is only a representation of the product; all functions can be used with paddles in any orientation. Electrical Requirements for Solenoid Functions: Warning: Voltage: 12VDC or 24VDC Regulated. Full wave rectification installed inside the lockbody. Current:.25A at 24VDC or.5a at 12VDC Operating Temp.: Max. 151 F (66 C), Min 31 F (-35 C) UL and CUL listed for use on Fire Doors NOTE: Repeated operation at voltage exceeding +/- 10% is not recommended. 549 Kit for Retrofitting ALP Push/Pull Trim Contains 2 retrofit plates and 8 screws. Use to cover prep from 114/115 and PT push/pull trim, as well as other manufacturer's trim, when retrofitting ALP trim. Available in 32D finish standard. Order kit # Do not connect locks to a circuit sharing an additional electromagnetic device as the lock may be damaged Transient voltage must be suppressed at the source or before connecting with the lock Varistor rated at 35 volts (peak) may be used for transient voltage protection NOTE: Opening the lockbody or replacing of the solenoid by non-authorized personnel voids UL label and lock warranty. 684 Positive Pull Stop Kit This kit prevents the latch from retracting when pulling the door closed. Used on openings where weather stripping is installed or when door closers are not utilized. Order kit # 684

19 Power Supplies and Requirements Requirements for Electrical and Data Transfer 12VDC & 24VDC Power Supplies: To answer the demand for smart electronic access control and locking solutions that require fast, easy, and cost-effective installation, ASSA ABLOY Group brands use the ElectroLynx standardized plug-in connectors and color-coded wiring system. With ElectroLynx, doorway components come pre-wired for easy hookup to the power source. Key to the system is the transfer device hinge that carries power from the frame to the locking hardware. Features of ElectroLynx: Makes it easy to bring power to the locking hardware Wires have connectors that snap together, like plugging a telephone into a jack To connect an 8200 Electrified Mortise Lock to the electronic access control system, the following items are required: 8200 Electrified Mortise Lock ASSA ABLOY Door Group pre-wired door, or ElectroLynx retrofit cable (order from McKINNEY) Electronic transfer device (ElectroLynx electronic transfer hinge or Electrical Power Transfer with standard hinge, from McKINNEY) ElectroLynx cable from the hinge to above the ceiling (order from McKINNEY) Information regarding cable selection, hinge requirements and order strings can be found in the McKinney Transfer Device Solutions catalog. Consult WIRE (9473) with questions on application specifications and requirements. McKINNEY QC8 ElectroLynx Hinges for functions and the RX- option is recommended. McKINNEY QC12 ElectroLynx Hinges for LX- or DX- option is recommended. UL Class 2 Listed Four 12V models and four 24V models available Integral battery charging capability keeps sealed lead acid gel/cell at full charge in case of line voltage failure (737-battery sold separately) Fused line voltage input with one, four, or eight DC outputs (depending on model) Each circuit can be individually turned on and off via a slide switch; the power status of each is shown by an LED. In the event of a DC short the problem is confined to the zone of difficulty Fire alarm interface standard SARGENT MODEL No. DESCRIPTION V - 1 AMP POWER SUPPLY V - 3 AMP POWER SUPPLY V AMP POWER SUPPLY V - 6 AMP POWER SUPPLY V - 5 AMP HOUR BACKUP BATTERY SARGENT MODEL No. DESCRIPTION V - 1 AMP POWER SUPPLY V - 2 AMP POWER SUPPLY V - 4 AMP POWER SUPPLY V - 6 AMP POWER SUPPLY V - 5 AMP HOUR BACKUP BATTERY 17

20 Turns, Emergency Releases and Indicators 130KBHW Turn for use with 8200 BHW Trim 2-1/4" round Stainless steel Only available with BHW trim Meets ADA Requirements 184KALP Emergency Release for use with 8200 Mortise ALP Trim 2-3/4" x 1-13/16" rectangular shape Brass or stainless steel housing Only available with ALP trim For 65, 66 and 68 functions only 130KALP Turn for use with 8200 Mortise ALP Trim 2-3/4" x 1-13/16" rectangular shape Brass or stainless steel housing Only available with ALP trim Meets ADA Requirements 184W Emergency Release for use with PT Trim 1-1/2" (38mm) round brass, bronze or stainless steel plate For 65, 66 and 68 functions only 130W Turn for use with PT Trim 1-1/2" (38mm) round brass, bronze or stainless steel plate Meets ADA Requirements Emergency Key Carbon steel For 65, 66 and 68 functions only Must be ordered separately 130KBH Turn for use with BHL Trim Lock Status and Secured Indicators for use with 8200 Mortise ALP Trim 49- Option Visual Status Indicator for Non Secure Applications Designed to work Inside Only with Classroom Security functions Red/White indicator plate standard, field replaceable OCC/VAC plate included Mounts on inside 185CALP of door Functions available: 30 and 37 As retrofit, order 185CALP x finish /2" (38mm) round brass or stainless steel plate Only available with BHL trim 49- Option Occupancy Indicator with Emergency Release Ideal for restrooms or conference rooms where easy determination of use needs to be made OCC/VAC indicator plate standard, field replaceable Red/White plate included Mounts on outside of door Emergency coin operated release standard Functions available: 65, 66 and 68 As retrofit, order 185PALP x finish 185PALP NOTE: For 49- and 50- Options, key will not retract latchbolt when used with 37 and 38 functions lock, the key will lock and unlock outside trim 50- Option Secured Indicator Rose Non-handed mounting VAC/OCC indicator plate standard, field replaceable Red/White plate included Mounts on outside of door Available for the following functions: 24, 25, 26, 28, 29, 30, 36, 37, 186PALP 38, 39, 40, 41, 43, 45, 50, 51, 52, 67 Patent pending design For retrofit kits: Specify: 186PALP x finish