PWGSC Ontario STEAM AND CONDENSATE Section Region Project HEATING PIPING Page 1 Number R

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "PWGSC Ontario STEAM AND CONDENSATE Section Region Project HEATING PIPING Page 1 Number R"

Transcription

1 Region Project HEATING PIPING Page 1 PART 1 - GENERAL 1.1 SECTION.1 Materials and installation of steel piping INCLUDES valves, fittings for steam and condensate building services piping. 1.2 RELATED.1 Section Common Work Results - SECTIONS Mechanical..2 Section Installation of Pipework..3 Section Thermal Insulation for Piping..4 Section Performance Verification of Mechanical Piping..5 Section Cleaning and Start-up of Mechanical Piping Systems..6 Section Installation of Pipework. 1.3 REFERENCES.1 American National Standards Institute (ANSI) / American Society of Mechanical Engineers (ASME).1 ASME B , Cast Iron Pipe Flanges and Flanged Fittings..2 ASME B , Buttwelding Ends..3 ASME B , Malleable Iron Threaded Fittings..4 ANSI/ASME B , Pipe Flanges and Flanged Fittings..5 ANSI/ASME B , Factory-Made Wrought Steel Buttwelding Fittings..6 ANSI B (R2005), Square and Hex Bolts and Screws (Inch Series)..7 ANSI/ASME B (R2005), Square and Hex Nuts (Inch Series)..2 American National Standards Institute (ANSI) / American Water Works Association (AWWA).1 ANSI/AWWA C111/A , Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings..3 ASTM International Inc..1 ASTM A47/A47M-99(2009), Standard Specification for Ferritic Malleable Iron Castings.

2 Region Project HEATING PIPING Page REFERENCES.3 (Cont'd) (Cont'd).2 ASTM A53/A53M-10, Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc Coated, Welded and Seamless..3 ASTM A126-04(2009), Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings..4 Canadian Standards Association (CSA International).1 CSA W48-06, Filler Metals and Allied Materials for Metal Arc Welding.(Developed in cooperation with the Canadian Welding Bureau)..5 Manufacturers Standardization Society of the Valve and Fittings Industry, Inc..1 MSS-SP , Cast Iron Gate Valves, Flanged and Threaded Ends..2 MSS-SP , Gray Iron Swing Check Valves, Flanged and Threaded Ends..3 MSS-SP , Bronze Gate, Globe, Angle and Check Valves..4 MSS-SP , Cast Iron Globe and Angle Valves, Flanged and Threaded Ends. 1.4 ACTION AND.1 Provide submittals in accordance with Section INFORMATIONAL SUBMITTALS.2 Product Data:.1 Provide manufacturer's printed product literature and datasheets for: valves. 1.5 CLOSEOUT.1 Provide operation and maintenance data for SUBMITTALS incorporation into manual specified in Section HEALTH AND.1 Do construction occupational health and safety SAFETY in accordance with Section Health and Safety Requirements. 1.7 WASTE.1 Separate waste materials for reuse and MANAGEMENT AND recycling in accordance with Section DISPOSAL.2 Remove from site and dispose of packaging materials at appropriate recycling facilities.

3 Region Project HEATING PIPING Page WASTE.3 Collect and separate for disposal packaging MANAGEMENT AND material for recycling in accordance with Waste DISPOSAL Management Plan. (Cont'd).4 Fold up metal banding, flatten and place in designated area for recycling. PART 2 - PRODUCTS 2.1 PIPE.1 Steel pipe: to ASTM A53/A53M, Grade B, as follows:.1 All sizes: Schedule Steam condensate..1 All sizes: Schedule PIPE JOINTS.1 Pipe threads: to ANSI/ASME B with PTFE tape or lead-free dope..2 Welded pipe: to ANSI/AWS D1.1, ANSI/ASME Sec. 9 and CSA W48..3 Flanges: plain or raised face. Flange gaskets to ANSI/AWWA C111/A Pipe thread: taper..5 Bolts and nuts: carbon steel, to ANSI/ASME B and ANSI/ASME B FITTINGS.1 Medium and high pressure steam ( PSI):.1 All sizes: welded fittings, 250 lb, to ANSI/ASME B Medium and high pressure steam condensate ( PSI):.1 All sizes: welded fittings, 250 lb, to ANSI/ASME B Pipe flanges: cast-iron to ANSI/ASME B Steel pipe gaskets, flanges and flanged fittings: to ANSI/ASME B Unions: malleable iron, to ASTM A47/A47M and ASME B Nipples: extra heavy black iron.

4 Region Project HEATING PIPING Page VALVES.1 Connections:.1 NPS 2 and smaller: screwed ends..2 NPS 2 1/2 and larger:.1 Equipment: Flanged..2 Elsewhere: Flanged..2 Gate valves:.1 NPS 2 and under:.1 NPS 2 and under: Class 250 to MSS-SP80. Rising stem, threaded, union bonnet and solid wedge. Body, bonnet and wedge shall be of bronze ASTM B-62. Stem shall be of dezincification-resistant silicon bronze ASTM B-371 or low-zinc alloy B NPS 2-1/2 and over:.1 Class 250 to MSS-SP70. OS&Y, flanged, bolted bonnet, solid wedge, iron body, bronze trimmed, with body and bonnet conforming to ASTM A126 Class B cast iron..3 Drain valves: See Gate Valves..4 Lift check valves:.1 NPS 2 and under: Class 150 to MSS-SP-80. Swing type, Y-pattern, threaded, bronze body to ASTM B-62, renewable TFE seat and disc, regrinding type, dezincification-resistant..2 NPS 2 1/2 and over: Class 125 to MSS-SP-71. Swing type, flanged, cast iron to ASTM A126 Class B, renewable bronze seat disc. 2.5 VALVE OPERATOR.1 Handwheel: on valves except as specified. 2.6 STRAINER.1 Description: Y-type with strainer baskets of material and perforations suitable for steam or water service, as required. Figure numbers of manufacturers are listed to indicate the types selected for design, performance and standard of quality..2 NPS 2 and under: Full pipeline size, 250 lb. SWP bronze, with screwed ends and a removable plug type screen retainer..3 NPS 2-1/2 and over: Full pipeline size, 250 lb. SWP semi-steel, with flanged ends and a bolted screen retainer..4 Screens: Stainless steel or monel screen with 20 mesh screen opening.

5 Region Project HEATING PIPING Page STRAINER.5 Provide a blowdown valve with a drain line to (Cont'd) discharge above an approved receptor on the blowdown connection of the strainer. Where strainers occur above ceilings, provide a blowdown valve with NPS 3/4 capped hose adapter fitting. 2.7 DIELECTRIC.1 NPS 2 and under: Screwed, ANSI B16.4 extra COUPLING heavy black cast iron coupling. PART 3 - EXECUTION 3.1 PIPING.1 Install pipework in accordance with Section , supplemented as specified herein..2 Connect branch lines into top of mains..3 Install piping in direction of flow with slopes as follows, unless otherwise indicated:.1 Steam: 1:480(1" per 40 ft)..2 Steam Condensate: 1:240(1" per 20 ft)..4 Make provision for thermal expansion..5 Drip pocket: line size. 3.2 TESTING.1 Test system in accordance with Section Performance Verification - Mechanical Piping Systems..2 Test pressure: 1-1/2 times maximum system operating pressure. 3.3 CLEANING.1 In accordance with Section Cleaning and Start-up of Mechanical Piping Systems. END

5.23.22 STEAM AND CONDENSATE PIPING AND PUMPS DESIGN AND CONSTRUCTION STANDARD PART 1: GENERAL. 1.01 Purpose:

5.23.22 STEAM AND CONDENSATE PIPING AND PUMPS DESIGN AND CONSTRUCTION STANDARD PART 1: GENERAL. 1.01 Purpose: PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is

More information

Series # Flanged Cast Steel Gate Valve Features

Series # Flanged Cast Steel Gate Valve Features Series 35114 150# Flanged Cast Steel Gate Valve Features SHARPE - SERIES 35114 150# Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided integrated

More information

DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES

DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES SECTION 15062 STEAM AND CONDENSATE PIPING PART 1 DESIGN DIRECTIVES 1.1 QUALITY ASSURANCE A. Comply with the provisions of the following: 1.2 DESIGN CRITERIA 1. ASME B 31.9 Building Services Piping : for

More information

NFPA 13 Standard for the Installation of Sprinkler Systems

NFPA 13 Standard for the Installation of Sprinkler Systems Tentative Interim Amendment NFPA 13 Standard for the Installation of Sprinkler Systems 2013 Edition Reference: Chapter 6 TIA 13-2 (SC 12-8-24/TIA Log #1054) Note: Text of the TIA issued and incorporated

More information

Series # Flanged Cast Steel Gate Valve Features

Series # Flanged Cast Steel Gate Valve Features Series 31 10# Flanged Cast Steel Gate Valve Features SHARPE - SERIES 31 10# Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided Integrated seats Rising

More information

ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.

ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16. ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.4-1998 - Cast Iron Threaded Fittings ASME/ANSI B16.5-1996 - Pipe

More information

RMF Engineering 23 05 23

RMF Engineering 23 05 23 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.

More information

Gas Distribution and Transportation

Gas Distribution and Transportation Piping System Includes: Pipe Fittings (e.g. elbows, reducers, branch connections, etc.) Flanges, gaskets, bolting Valves Associations involved in generating Codes for piping Design Engineering: ASME ANSI

More information

SEAMLESS WELDED FITTINGS

SEAMLESS WELDED FITTINGS SEAMLESS WELDED FITTINGS WALL THICKNESS NPS Pipe 2 A B K D V E F G O.D. Light SCH SCH STD SCH SCH X-SIG SCH SCH SCH SCH SCH XX NPS Wall 20 0 40 60 80 00 20 40 60 Stg ASA MSS /2.840.08 --- ---.09.09 ---.4.4

More information

Series # Flanged Cast Steel Globe Valve Features

Series # Flanged Cast Steel Globe Valve Features Series 45114 150# Flanged ast Steel Globe Valve Features SARP - SRIS 45114 150# Flanged ast Steel Globe Valve Outside screw and yoke Bolted bonnet Stem / Wedge onnection meets API 600 Pull Test Welded

More information

Spectifications. ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers)

Spectifications. ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers) Spectifications ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers) ANSI / ASME B1.20.1 ASME B16.10 ASME B16.11 ASME B16.25 ANSI / ASME B16.28 ANSI / ASME B16.34

More information

American Society of Mechanical Engineers

American Society of Mechanical Engineers American Society of Mechanical Engineers ASTM A53 /ASME SA53 Pipe Steel Black and Hot Dipped Zinc Coated Welded and Seamless ASTM A105/ASME SA105 Forgings, Carbon Steel, for Piping Components ASTM A106/ASME

More information

Section 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1

Section 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1 Section 7 Socket Weld and Threaded Fittings This Section contains dimension and tolerance information extracted from American and British specifications applicable to socket weld and threaded fittings.

More information

Victaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500)

Victaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500) Victaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500) 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings

More information

SECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS

SECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS SECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS PART 1: GENERAL 1.01 COORDINATION OF WORK Connection to existing pipelines may require shutdown of AW facilities. Closely coordinate construction work

More information

universal BALL VALVES FLOATING MONOBLOC - WAFER SPLIT BODY - 2 PIECES TRUNNION 3 PIECES BODY SIDE & TOP ENTRY

universal BALL VALVES FLOATING MONOBLOC - WAFER SPLIT BODY - 2 PIECES TRUNNION 3 PIECES BODY SIDE & TOP ENTRY BALL VALVES FLOATING MONOBLOC - WAFER SPLIT BODY - 2 PIECES TRUNNION 3 PIECES BODY SIDE & TOP ENTRY CONSTRUCTION B 16.34 API 6A - API 6D BS 5351 EN 17292 SIZE FROM 1/2 TO 60 REDUCED AND FULL BORE CLASS

More information

PLUMBING RE-SUBMITTAL 22 11 17

PLUMBING RE-SUBMITTAL 22 11 17 PLUMBING RE-SUBMITTAL 22 11 17 ACADEMIC BUILDING & PATRIOT S CASA TEXAS A&M UNIVERSITY - SAN ANTONIO, TX NO. 25-3122, VAC NO. 39019 OWNER: ARCHITECT: MEP ENGINEER: GENERAL CONTRACTOR: PLUMBING CONTRACTOR:

More information

SECTION 15010 GENERAL REQUIREMENTS, MECHANICAL. 1. All piping entering the Shipyard must be controlled per Shipyard Standard Procedure # 21.1-1.

SECTION 15010 GENERAL REQUIREMENTS, MECHANICAL. 1. All piping entering the Shipyard must be controlled per Shipyard Standard Procedure # 21.1-1. SECTION 15010 June 16, 2005 GENERAL REQUIREMENTS, MECHANICAL A. GENERAL 1. All piping entering the Shipyard must be controlled per Shipyard Standard Procedure # 21.1-1. 2. All piping shall be in accordance

More information

SECTION 15105 DUCTILE IRON PIPE AND FITTINGS

SECTION 15105 DUCTILE IRON PIPE AND FITTINGS SECTION 15105 DUCTILE IRON PIPE AND FITTINGS PART 1 GENERAL.01 COORDINATION OF WORK Connection to existing pipelines may require shutdown of Owner facilities. Closely coordinate construction work and connections

More information

Series 25114 150# Flanged Cast Steel Check Valve

Series 25114 150# Flanged Cast Steel Check Valve Series 25114 150# langed Cast Steel Check Valve eatures SHARPE - SERIES 25114 150# langed Cast Steel Check Valve Bolted Cover Swing Type or Horizontal or Vertical lines Integral Seat langed Ends Butt Weld

More information

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant). Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)

More information

Hose Clamps & Fittings

Hose Clamps & Fittings All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw

More information

Copper and Copper Alloy Tube, Pipe and Fittings

Copper and Copper Alloy Tube, Pipe and Fittings Copper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification

More information

Style 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description

Style 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard

More information

CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size

CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance

More information

HYDRONIC PIPING SPECIALTIES AND PIPING GUIDELINES

HYDRONIC PIPING SPECIALTIES AND PIPING GUIDELINES HYDRONIC PIPING SPECIALTIES AND PIPING GUIDELINES GENERAL INFORMATION 1.1 This section applies to piping systems specialties for hot water heating, chilled water cooling, condenser water, make-up water

More information

www.klmtechgroup.com TABLE OF CONTENTS

www.klmtechgroup.com TABLE OF CONTENTS Page : 1 of 216 TABLE OF CONTENTS 1 GENERAL 2 1.1 Scope 2 1.2 Code and s 2 1.3 Pressure-Temperature Design 6 1.4 Pipe Wall Thickness Allowance 7 1.5 Ends 8 1.6 Units 8 1.7 Language 9 2 MATERIAL 9 2.1 General

More information

CODES AND STANDARDS. Codes and Standards, apart from being regulations, might be considered as design aids since they provide guidance from experts.

CODES AND STANDARDS. Codes and Standards, apart from being regulations, might be considered as design aids since they provide guidance from experts. CODES AND STANDARDS T. N. GOPINATH For scientific design of Piping Systems, selection of proper material of construction and to detail out the material specifications, knowledge of Codes and Standards

More information

SECTION 32 31 13 CHAIN LINK FENCES AND GATES

SECTION 32 31 13 CHAIN LINK FENCES AND GATES SECTION 32 31 13 CHAIN LINK FENCES AND GATES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Fence framework, fabric, and accessories. 2. Excavation for post bases. 3. Concrete foundation for posts

More information

Vogt Valves The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22

Vogt Valves The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22 The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22 Extended Body Forged Steel Valves An extended body gate valve specifically designed

More information

VAD. Variable Area Desuperheaters

VAD. Variable Area Desuperheaters Desuperheater overview Steam used in process plants can be superheated, that is, heated to a temperature above saturation. The excess of temperature above its saturation is called 'superheat'. Desuperheated

More information

Standards and Related Materials Contained in this Volume:

Standards and Related Materials Contained in this Volume: Volume 01.01, January 2007 Steel - Piping, Tubing, Fittings Standards and Related Materials Contained in this Volume: (Click here for a list of withdrawn standards) A53/A53M-06a Standard Specification

More information

AMERICAN SOCIETY OF TESTING MATERIALS (ASTM)

AMERICAN SOCIETY OF TESTING MATERIALS (ASTM) AMERICAN SOCIETY OF TESTING MATERIALS (ASTM) The Volume#1 details the standars for: 1. standards for various types of steel pipes specifying requirements for high-temperature services, ordinary use, and

More information

SECTION 8 AMERICAN. Flanged Pipe

SECTION 8 AMERICAN. Flanged Pipe SECTION 8 AMERICAN Flanged Pipe The principal standards covering Flanged Pipe are ANSI/AWWA C115/A21.15 and ANSI/AWWA C110/A21.10. These and other standards are referenced throughout this Section either

More information

IBV Series C, Z, C-LF2 Inverted Bucket Vertical Steam Trap

IBV Series C, Z, C-LF2 Inverted Bucket Vertical Steam Trap IBV Series C, Z, C-LF2 Inverted Bucket Vertical Steam Trap Description The IBV series inverted bucket steam trap is manufactured in three different body and cover materials. C Series (carbon steel), Z

More information

GATE VALVES. Overview... 10

GATE VALVES. Overview... 10 Overview... 0 olted onnet ate- 800 lb. & 0 lb. valves... olted onnet ate- 0 lb. & 0 lb. valves... Welded onnet ate- 800 lb. & 0 lb. valves... 3 Welded onnet ate- 0 lb. & 40 lb. valves... 4 TE VLVES 9 OVERVIEW

More information

SV60 Safety Valve. Inlet sizes: DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125 and DN150. Valve type Inlet connection Outlet connection

SV60 Safety Valve. Inlet sizes: DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125 and DN150. Valve type Inlet connection Outlet connection Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

SECTION 33 12 19 FIRE HYDRANTS

SECTION 33 12 19 FIRE HYDRANTS SECTION 33 12 19 FIRE HYDRANTS PART 1: GENERAL 1.01 SCOPE A. Fire hydrants. B. Adjustment of fire hydrants and gate valves. 1.02 SUBMITTALS A. Conform to requirements of Section 01 33 00 - Submittals.

More information

DESIGN STANDARDS SECTION 23 60 00

DESIGN STANDARDS SECTION 23 60 00 PART 1 - GENERAL 1.01 Work included: A. Piping, tubing and fittings. B. Piping specialties. C. Special duty valves. D. Refrigerants. E. Chillers. F. Refrigerant monitors. 1.02 General requirements: A.

More information

PRESSURE REDUCING CONTROL VALVE

PRESSURE REDUCING CONTROL VALVE Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line

More information

Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001

Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from

More information

January 29, 2015 L-1 STEEL PIPE

January 29, 2015 L-1 STEEL PIPE January 29, 2015 L-1 STEEL PIPE STANDARD GALVANIZED PIPE THREADED & COUPLED Lbs Pieces Average External Internal Per Per Feet Per SSC No. Size Lgth Diameter Diameter Foot Bundle Bundle Price Each Price

More information

ASTM A860/A860M-09 Standard Specification for Wrought High Strength. Ferritic Steel Butt Welding Fittings. 1. Scope :- 2. Reference Documents :-

ASTM A860/A860M-09 Standard Specification for Wrought High Strength. Ferritic Steel Butt Welding Fittings. 1. Scope :- 2. Reference Documents :- Standard Specification for Wrought High Strength Ferritic Steel Butt Welding Fittings 1. Scope :- 1.1 This specification covers wrought high strength ferritic steel butt-welding fitting of seamless and

More information

APCO COMBINATION AIR VALVES

APCO COMBINATION AIR VALVES BULLETIN 3 JULY 014 APCO COMBINATION AIR VALVES Series 1800 Custom Combination Duplex Body Series 140C Standard Combination Single Body www.dezurik.com APCO Combination Air Valves Single Body Double Orifice

More information

FLANGED END BALL VALVE

FLANGED END BALL VALVE Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material

More information

4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves

4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves 1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire

More information

Ammonia piping should conform to ASME Standard B31.5, Refrigerant Piping and IIAR Standard 2, which states the following:

Ammonia piping should conform to ASME Standard B31.5, Refrigerant Piping and IIAR Standard 2, which states the following: Refrigerant Piping The following recommendations are given for ammonia piping. Local codes or ordinances governing ammonia mains should also be followed, in addition to the recommendations here. Recommended

More information

WD600 STEAM TRAPS. Thermodynamic Steam Trap

WD600 STEAM TRAPS. Thermodynamic Steam Trap WD600 Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company WD600, WD600L Sizes 3/8, 1/2, 3/4, 1 NPT Material Stainless

More information

SAMPLE TEST QUESTIONS STEAMFITTER/PIPEFITTER - ITA WEBSITE

SAMPLE TEST QUESTIONS STEAMFITTER/PIPEFITTER - ITA WEBSITE 1 Which tool is used to correct internal hi-low when preparing a 4-in. steel pipe for welding? A. 4-in. grinder with cutting disc. B. Mini-grinder with flapper disc. C. Pencil grinder with cone stone.

More information

Worldwide Contacts.

Worldwide Contacts. Worldwide Contacts www.tyco-fire.com Resilient-Seated Gate Valves Outside Screw and Yoke General Description TYCO Resilient-Seated Gate Valves are used in Fire Protection Systems for on/off operation.

More information

SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS

SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS PART 1 GENERAL 1.01 SECTION INCLUDES A. The requirements for pipe material and installation in sewer and drainage collection systems. All materials

More information

SECTION 32 31 00 EXPANDED METAL FENCING Meets Buy American Procurement

SECTION 32 31 00 EXPANDED METAL FENCING Meets Buy American Procurement PART 1 GENERAL SECTION 32 31 00 EXPANDED METAL FENCING Meets Buy American Procurement 1.1 SUMMARY A. Section Includes 1. Supply and install all materials and accoutrements required for the installation

More information

PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta

PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved

More information

Anatomy of a Grooved Pipe Joint ANATOMY OF A GROOVED PIPE JOINT

Anatomy of a Grooved Pipe Joint ANATOMY OF A GROOVED PIPE JOINT The grooved piping system has been around for over 85 years, providing fast, easy, reliable piping assembly. While technology has changed application parameters cut grooving to roll grooving, standard

More information

DESCRIPTION. Stud Bolts for Pressure-Temperature Piping 2-1. General Purpose End-to-End Studs 2-2. Tap End Stud Bolts 2-3. Double End Stud Bolts 2-4

DESCRIPTION. Stud Bolts for Pressure-Temperature Piping 2-1. General Purpose End-to-End Studs 2-2. Tap End Stud Bolts 2-3. Double End Stud Bolts 2-4 DESCRIPTION PAGE B7 Studs and Nuts Stud Bolts for Pressure-Temperature Piping 2-1 General Purpose End-to-End Studs 2-2 Tap End Stud Bolts 2-3 Double End Stud Bolts 2-4 Sigma Fasteners, Inc. Section 2 STUD

More information

FLANGED FITTINGS OUR KNOWLEDGE SETS US APART

FLANGED FITTINGS OUR KNOWLEDGE SETS US APART OUR KNOWLEDGE SETS US APART Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts & Bolts TABLE OF CONTENTS Flange Details - Class 125............................................2 Designation

More information

RING JOINT SYSTEMS 207

RING JOINT SYSTEMS 207 RING JOINT SYSTEMS 07 08 Table of Contents Model R-88 Pages 10-11 Model R-88 Large Diameter Page 1 Model RH-1000 1000 PSI Coupling Page 13 Model RX-3000 3000 PSI Coupling Page 1 Model RX-3770 3770 PSI

More information

Caps STANDARD WEIGHT Inches / Pounds

Caps STANDARD WEIGHT Inches / Pounds Standard Caps you are here: Home > Weldbend Catalog > Fittings > Caps Caps STANDARD WEIGHT Inches / Pounds For Metric Units >Click Here Nominal Pipe Size Outside Inside Wall Thickness (T) Length (E) Pipe

More information

REGULATORS D& HD Series

REGULATORS D& HD Series Watson McDaniel reserves the right to change the designs and/or materials of its products out notice. 2002 Watson McDaniel Company Ductile Iron body - HD Series Full port strainer & blowdown valve on pilot

More information

VAD Variable Area Desuperheaters

VAD Variable Area Desuperheaters Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

Econosto UK. www.econosto.uk.com. LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345

Econosto UK. www.econosto.uk.com. LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345 LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345 ABERDEEN Econosto UK Ltd Blackness Road Altens Industrial Estate Aberdeen AB12 3LH T:

More information

A. ASME Compliance: Fabricate and install hydronic piping in accordance with ASME B31.9 "Building Services Piping.

A. ASME Compliance: Fabricate and install hydronic piping in accordance with ASME B31.9 Building Services Piping. PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is

More information

www.klmtechgroup.com TABLE OF CONTENT

www.klmtechgroup.com TABLE OF CONTENT Page : 1 of 16 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia ORIFICE FLANGES TABLE OF CONTENT SCOPE

More information

Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components

Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE

More information

PIPES AND TUBES FOR HVAC PIPING AND EQUIPMENT

PIPES AND TUBES FOR HVAC PIPING AND EQUIPMENT PIPES AND TUBES FOR HVAC PIPING AND EQUIPMENT GENERAL INFORMATION 1.1 This section applies to piping systems for chilled water, hot water, condenser water, steam, condensate return, fuel oil, refrigerant

More information

Stainless Steel 150# Fittings Threaded & Socket Weld

Stainless Steel 150# Fittings Threaded & Socket Weld CORPORTE OFFICE TEL (800) 766-0076 LOCL (323) 890-4455 FX (323) 890-4456 WWW.SMITHCOOPER.COM Stainless Steel 150# Fittings Threaded & Socket Weld 150# Stainless Fittings Specifications Stainless Castings

More information

Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:

Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below: Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees

More information

The Manitoba Water Services Board SECTION 027110 Standard Construction Specifications September 2013 Page 1 of 12

The Manitoba Water Services Board SECTION 027110 Standard Construction Specifications September 2013 Page 1 of 12 September 2013 Page 1 of 12 Part 1 General 1.1 DESCRIPTION OF WORK.1 The work shall consist of the supply and construction of a chain link fence, barb wire fences or mesh fences as shown on the Plans or

More information

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½ to 12 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

API Flanged Safety Relief Valves Series 526 CATALOG

API Flanged Safety Relief Valves Series 526 CATALOG API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes

More information

Texas Flange. Product Catalog Fax

Texas Flange. Product Catalog Fax Texas Flange Product Catalog 800-826-3801 630-627-0642 Fax Information In this catalog was compiled from industry sources which Texas Flange & Fitting believes to be reliable. Texas Flange & Fitting Supply,

More information

ATEX 94/9/EC SIL3 IEC GOST-R TYPE APPROVAL

ATEX 94/9/EC SIL3 IEC GOST-R TYPE APPROVAL ATEX 94/9/EC SIL3 IEC 61508 GOST-R TYPE APPROVAL 95 90 75 Stroke 15 0 4. Universal and anti-blowout drive shaft It permits an easy conversion from parallel to diagonal square and vice versa. It is also

More information

1. Galvanized fence framework, fabric, and accessories. 2. Excavation for post bases, and concrete for post footings.

1. Galvanized fence framework, fabric, and accessories. 2. Excavation for post bases, and concrete for post footings. SECTION 32 31 13 CHAIN LINK FENCES PART 1 GENERAL 1.1 SUMMARY A. This Section includes: 1. Galvanized fence framework, fabric, and accessories. 2. Excavation for post bases, and concrete for post footings.

More information

SECTION 15056 DUCTILE-IRON PIPE AND FITTINGS

SECTION 15056 DUCTILE-IRON PIPE AND FITTINGS SECTION 15056 PART 1 GENERAL 1.01 DESCRIPTION This section includes materials and installation of ductile-iron pipe and fittings for potable and recycled water systems. A written request to use Ductile

More information

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½ to 12 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

American- Darling 5¼" B-84-B-5.

American- Darling 5¼ B-84-B-5. -5 Sealed Lubrication Chamber Seals operating threads from water and debris which greatly reduces routine maintenance. Top Travel Stop Nut Helps prevent stem buckling and damage to bronze components which

More information

Fig B36 Stainless Steel 'T' Type or Basket Type Strainers

Fig B36 Stainless Steel 'T' Type or Basket Type Strainers Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

PBX Series Quick Fit Connector Bimetallic Steam Traps

PBX Series Quick Fit Connector Bimetallic Steam Traps 6262100/6 IM-P626-01 ST Issue 6 PBX Series Quick Fit Connector Bimetallic Steam Traps Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Commissioning

More information

Crane Cast Steel Valves

Crane Cast Steel Valves Crane Cast Valves Cast Valves General Index Ordering Information... 4 Materials... 5 General Data... 6 Identification... 7 General Features... 8 Gate Valve Features... 9 NACE Trim Valves...13 Globe Valve

More information

Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve

Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications

More information

Instructions for Installation, Operation, Care and Maintenance

Instructions for Installation, Operation, Care and Maintenance Model D Dry Pipe Valve Bulletin 350 Rev.R Bulletin 350 Rev.R Instructions for Installation, Operation, Care and Maintenance 4 (100mm) 6 (150mm) Valve With Model D Trimmings Listed by Underwriters Laboratories,

More information

Float and Thermostatic Traps Series H, C and X

Float and Thermostatic Traps Series H, C and X Hoffman Specialty Installation & Maintenance Instructions HS-(E) and Thermostatic Traps Series H, C and X Series C & NPT Series C NPT Series X NPT Series C NPT Series H Ratings Maximum Max. Operating NPT

More information

SECTION 02630 STORM DRAINAGE SYSTEM

SECTION 02630 STORM DRAINAGE SYSTEM SECTION 02630 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for storm drainage systems including modifications and connections to existing storm drainage systems. 1.02 REFERENCE

More information

Blowdown vessels Meeting the requirements of HSE PM60

Blowdown vessels Meeting the requirements of HSE PM60 Blowdown vessels Meeting the requirements of HSE PM60 BDV60 blowdown vessels complete range of equipment for the safe disposal of boiler blowdown Boiler blowdown Steam boilers must be blown down to remove

More information

2014 Edition 3"-64" NSF. industrial Applications, water & Wastewater. Certified to ANSI/NSF 61

2014 Edition 3-64 NSF. industrial Applications, water & Wastewater. Certified to ANSI/NSF 61 3"-64" Ductile Iron industrial Applications, water & Wastewater 866.DI.IE 2 Table of Contents Flanged ipe for Water and Other Liquids 3 Ductile Iron Flanged ipe With Threaded Flanges-Flanged Details 5

More information

V47 Series Temperature Actuated Modulating Water Valves

V47 Series Temperature Actuated Modulating Water Valves V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate

More information

www.klmtechgroup.com TABLE OF CONTENT

www.klmtechgroup.com TABLE OF CONTENT Page : 1 of 10 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT SCOPE 2 REFERENCES

More information

Stainless Steel Pipe & Tubing

Stainless Steel Pipe & Tubing CORPORATE OFFICE TEL (800) 766-0076 LOCAL (323) 890-4455 FAX (323) 890-4456 WWW.SMITHCOOPER.COM Stainless Steel Pipe & Tubing Stainless Pipe 304/304L & 316/316L Stainless Steel Pipe Wall Thickness and

More information

2-42 Flanged Vacuum Breaker. Operation, Maintenance and Installation Manual

2-42 Flanged Vacuum Breaker. Operation, Maintenance and Installation Manual Manual No. VB-OM1-1 2-42 Flanged Vacuum Breaker Operation, Maintenance and Installation Manual INTRODUCTION... 1 RECEIVING AND STORAGE... 1 DESCRIPTION OF OPERATION... 1 INSTALLATION... 2 DRAWING SS-1381...

More information

CHAPTER 11 STORM DRAINAGE

CHAPTER 11 STORM DRAINAGE CHAPTER STORM DRAINAGE SECTION PC 0 GENERAL 0. Scope. The provisions of this chapter shall govern the materials, design, construction and installation of storm drainage. Storm water discharge shall be

More information

PLUMBING VALVES HOUSTON ORLANDO GREENVILLE 800/392-5066 800/327-3022 800/476-2212 TOTAL MAINTENANCE SOLUTIONS

PLUMBING VALVES HOUSTON ORLANDO GREENVILLE 800/392-5066 800/327-3022 800/476-2212 TOTAL MAINTENANCE SOLUTIONS 8-1 BRONZE GATE VALVES 125 psi. SWP 200 psi WOG Threaded ends Non-rising stem Solid wedge disc DOMESTIC IMPORT PART # 40300250 1/4 40300260 40300251 3/8 40300261 40300252 1/2 40300262 40300206 3/4 40300263

More information

Vogt Valves The Connection Bulletin for Forged Steel Flow Control Valves CB 15

Vogt Valves The Connection Bulletin for Forged Steel Flow Control Valves CB 15 The Connection Bulletin for Forged Steel Flow Control Valves CB 15 Flow Control Division Forged Steel Flow Control Valves GRADUATED DIAL AND INDICATOR FULLY GUIDED V-PORT THROTTLING DISC AND INTEGRAL HARD

More information

3", 4", 6" & 8" Model H Series Alarm Check Valve Installation and Maintenance Guide

3, 4, 6 & 8 Model H Series Alarm Check Valve Installation and Maintenance Guide ", ", " & " Model H Series Alarm Check Valve Installation and Maintenance Guide 077 AIRPARK DRIVE STANDISH, MICHIGAN PHONE 99-- 00-2-0 FAX 99--92 www.globesprinkler.com OCTOBER 2 C- BULLETIN A.C.V.I.M.,

More information

AURORA. 1030 AND 1040 Series SUCTION DIFFUSERS, COMBINATION AND TRIPLE DUTY VALVES WWW.AURORAPUMP.COM

AURORA. 1030 AND 1040 Series SUCTION DIFFUSERS, COMBINATION AND TRIPLE DUTY VALVES WWW.AURORAPUMP.COM UROR 1030 ND 1040 Series SUCTION DIFFUSERS, COMINTION ND TRIPLE DUTY VLVES WWW.URORPUMP.COM UROR 1030 ND 1040 Series Suction Diffusers, Combination and Triple Duty Valves Designed for Direct Mounting on

More information

SECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE

SECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE SECTION 15076 CEMENT-MORTAR LINED AND COATED (CML&C) STEEL PIPE PART 1 GENERAL 1.01 DESCRIPTION This section designates the requirements for steel pipe fabrication, test in shop, installation of steel

More information

General Data... 5 Materials... 6 Pressure/Temperature Ratings... 7 C V

General Data... 5 Materials... 6 Pressure/Temperature Ratings... 7 C V CRNE Iron Valves Iron Valves Index General Data... 5 Materials... 6 Pressure/Temperature Ratings... 7 C V Coefficients... 8 Gate Section... 9 Globe Section... 25 Check Section... 30 Technical Data...

More information

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,

More information

UNIFIED FACILITIES GUIDE SPECIFICATIONS

UNIFIED FACILITIES GUIDE SPECIFICATIONS USACE / NAVFAC / AFCEC / NASA UFGS-33 63 16 (July 2006) -------------------------- Preparing Activity: NAVFAC Superseding UFGS-33 63 16 (April 2006) UNIFIED FACILITIES GUIDE SPECIFICATIONS References are

More information

Pipe and Tubing PIPE. Black and Galvanized Steel Pipe. Standard and Extra Strong Welded Steel Pipe

Pipe and Tubing PIPE. Black and Galvanized Steel Pipe. Standard and Extra Strong Welded Steel Pipe Black and Galvanized Steel Pipe PIPE Wheatland Steel Pipe is made by specialists who understand that it s the small details that make the difference between average products and superior products. At the

More information

WALKWAYS LADDER RUNGS

WALKWAYS LADDER RUNGS BACK FORWARD STEEL PLATES/ LAMINAS/ PLANCHAS SAFETY PRODUCTS STEEL PLATES LAMINAS PLANCHAS ASTM A 36 A 36 ABS CERTIFIED AR 400 AR 500 ASTM 514 ASTM A 515 GR 50/60/70 ASTM A 516 GR 50/60/70 CORTEN OR ASTM

More information