Inductive sensors IME
|
|
- Joleen Goodman
- 7 years ago
- Views:
Transcription
1 DATA SHEET Inductive sensors IE Dependable for industrial applications
2 Inductive proximity sensors Installation Flush installation in metal notes The sensor can be embedded in the metal up to the sensing face. Proximity sensors for flush installation have a smaller sensing range compared to proximity sensors for non-flush installation with the same shape and design. General installation notes for cylindrical design for flush installation in metal: d B d Sn (C) Standard series etal-free zone [mm] IE08-B5... B = 8, C =,5 IE-0B... B =, C = 6 IE8-05B... B = 8, C = 5 IE0-0B... B = 0, C = 0 Flush installation Advanced-Reihe etal-free zone [mm] IE08-0B... B = 6, C = 6 IE-0B... B =, C = IE8-08B... B = 6, C = IE0-5B... B = 60, C = 5 d = Outer diameter of the sensor SICK
3 Inductive proximity sensors Installation notes Non-flush installation in metal With proximity sensors for non-flush installation, a metal-free zone must be maintained owing to the scattered field distribution. General installation notes for cylindrical design for non-flush installation in metal: Standard series A B IE08-N5... etal-free zone [mm] A = 8, B = 6, C = 7,5, D = 6 A IE-0N... A =, B =, C =, D = 8 d Sn (C) IE8-08N... A = 8, B = 6, C =, D = 6 IE0-5N... A = 0, B = 60, C = 5, D = 0 D Non-flush installation d = Outer diameter of the sensor Advanced series IE08-0N... IE-08N... IE8-N... IE0-0N... etal-free zone [mm] A = 8, B = 8, C =, D = 8 A =, B =, C =, D = 6 A = 8, B = 6, C = 6, D = A = 0, B = 60, C = 60, D = 0 Opposite installation in metal 8 S n 8 S n SICK
4 Inductive sensor, IE series, IE08, DC-wire, Standard series, Flush Inductive sensor Sensing range.5 mm Short-circuit protection (pulsed) Dimensional drawing 8x Robust brass housing, nickelplated with fine thread 8 x mm 50 Enclosure rating IP 67 Installation flush Ø.9 8x 5 Connection Display LED Fastening nuts ( x); width across, metal C LISTED US IE08-B5NOZT0S IE08-B5NSZT0S IE08-B5POZT0S IE08-B5PSZT0S IE08-B5NOZWS IE08-B5NSZWS IE08-B5POZWS IE08-B5PSZWS Accessories Connector, 8, -pin 8, -pin x 0. mm² SICK
5 IE08 Technical specifications IE08- B5NO ZT0S B5NO ZWS B5NS ZT0S B5NS ZWS B5PO ZT0S B5PO ZWS B5PS ZT0S B5PS ZWS Sensing range S n.5 mm Electrical configuration DC-wire Supply voltage V s DC V Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R Typ. % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Flush Connector, 8, -pin Cable, PVC, m Enclosure rating IP 67 ) ax. switching frequency 000 Hz Dimensions 8 x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a 5 C C Housing material Brass nickel-plated, plastic (PA Tightening torque Typ. 5 Nm Approvals Protection class UL approval culus Listed ) At I a max ) Without load ) Of s r ) According to EN ) Thread diameter x pitch (mm) (Pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steel (VA) Approx. 0.8 Aluminum (solid) Approx. 0.5 Copper (Cu) Approx. 0. Ordering information Part Number IE08-B5NOZT0S IE08-B5NOZWS 0085 IE08-B5NSZT0S 0086 IE08-B5NSZWS 0088 IE08-B5POZT0S 008 IE08-B5POZWS 008 IE08-B5PSZT0S 0088 IE08-B5PSZWS SICK 5
6 Inductive sensor, IE series, IE08, DC-wire, Standard series, Non-flush Inductive sensor Sensing range.5 mm Short-circuit protection (pulsed) Dimensional drawing 8x Robust brass housing, nickel- 0 plated with fine thread 8 x mm Enclosure rating IP Installation non-flush Ø.9 0 8x 5 Connection Display LED Fastening nuts ( x); width across, metal C LISTED US IE08-N5NOZT0S IE08-N5NSZT0S IE08-N5POZT0S IE08-N5PSZT0S IE08-N5NOZWS IE08-N5NSZWS IE08-N5POZWS IE08-N5PSZWS Accessories Connector, 8, -pin 8, -pin x 0. mm² 6 SICK
7 IE08 Technical specifications IE08- N5N OZT0S N5NO ZWS N5NS ZT0S N5NS ZWS N5PO ZT0S N5PO ZWS N5PS ZT0S N5PS ZWS Sensing range S n.5 mm Electrical configuration DC-wire Supply voltage V s DC V Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R Typ. % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Non-flush Connector, 8, -pin Cable, PVC, m Enclosure rating IP 67 ) ax. switching frequency 000 Hz Dimensions 8 x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a 5 C C Housing material Brass nickel-plated, plastic (PA Tightening torque Typ. 5 Nm Approvals Protection class UL approval culus Listed ) At I a max ) Without load ) Of s r ) According to EN ) Thread diameter x pitch (mm) (Pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steel (VA) Approx. 0.8 Aluminum (solid) Approx. 0.5 Copper (Cu) Approx. 0. Ordering information Part Number IE08-N5NOZT0S IE08-N5NOZWS IE08-N5NSZT0S 0086 IE08-N5NSZWS 0086 IE08-N5POZT0S IE08-N5POZWS IE08-N5PSZT0S 0085 IE08-N5PSZWS SICK 7
8 Inductive sensor, IE series, IE08, DC-wire, Short version, Flush Inductive sensor Sensing range.5 mm Short-circuit protection (pulsed) Dimensional drawing 8x Robust brass housing, nickelplated with fine thread 8 x mm 5 Enclosure rating IP 67 Installation flush Ø.9 5 8x Connection Display LED Fastening nuts ( x); width across, metal C LISTED US IE08-B5NOZT0K IE08-B5NSZT0K IE08-B5POZT0K IE08-B5PSZT0K IE08-B5NOZWK IE08-B5NSZWK IE08-B5POZWK IE08-B5PSZWK Accessories Connector, 8, -pin 8, -pin x 0. mm² 8 SICK
9 IE08 Technical specifications IE08- B5NO ZT0K B5NO ZWK B5NS ZT0K B5NS ZWK B5PO ZT0K B5PO ZWK B5PS ZT0K B5PS ZWK Sensing range S n.5 mm Electrical configuration DC-wire Supply voltage V s DC V Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R Typ. % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Flush Connector, 8, -pin Cable, PVC, m Enclosure rating IP 67 ) ax. switching frequency 000 Hz Dimensions 8 x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a 5 C C Housing material Brass nickel-plated, plastic (PA Tightening torque Typ. 5 Nm Approvals Protection class UL approval culus Listed ) At I a max ) Without load ) Of s r ) According to EN ) Thread diameter x pitch (mm) (Pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steel (VA) Approx. 0.8 Aluminum (solid) Approx. 0.5 Copper (Cu) Approx. 0. Ordering information Part Number IE08-B5NOZT0K 0089 IE08-B5NOZWK 0085 IE08-B5NSZT0K 0085 IE08-B5NSZWK 0087 IE08-B5POZT0K 008 IE08-B5POZWK 008 IE08-B5PSZT0K 0087 IE08-B5PSZWK SICK 9
10 Inductive sensor, IE series, IE08, DC-wire, Short version, Non-flush Inductive sensor Sensing range.5 mm Short-circuit protection (pulsed) Dimensional drawing 8x Robust brass housing, nickel- plated with fine thread 8 x mm Enclosure rating IP 67 5 Installation non-flush Ø.9 8x 5 Connection Display LED Fastening nuts ( x); width across, metal C LISTED US IE08-N5NOZT0K IE08-N5NSZT0K IE08-N5POZT0K IE08-N5PSZT0K IE08-N5NOZWK IE08-N5NSZWK IE08-N5POZWK IE08-N5PSZWK Accessories Connector, 8, -pin 8, -pin x 0. mm² 0 SICK
11 IE08 Technical specifications IE08- N5NO ZT0K N5NO ZWK N5NS ZT0K N5NS ZWK N5PO ZT0K N5PO ZWK N5PS ZT0K N5PS ZWK Sensing range S n Electrical configuration.5 mm DC-wire Supply voltage V s DC V Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R Typ. % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output Output function Installation NPN PNP Normally closed Normally open Non-flush Enclosure rating IP 67 ) ax. switching frequency Connector, 8, -pin Cable, PVC, m 000 Hz Dimensions 8 x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a 5 C C Housing material Tightening torque Approvals Protection class UL approval ) At I a max ) Without load Brass nickel-plated, plastic (PA Typ. 5 Nm culus Listed ) Of s r ) According to EN ) Thread diameter x pitch (mm) (Pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steel (VA) Approx. 0.8 Aluminum (solid) Approx. 0.5 Copper (Cu) Approx. 0. Ordering information Part Number IE08-N5NOZT0K IE08-N5NOZWK IE08-N5NSZT0K 0086 IE08-N5NSZWK 0086 IE08-N5POZT0K IE08-N5POZWK IE08-N5PSZT0K 0085 IE08-N5PSZWK SICK
12 Inductive sensor, IE series, IE08, DC-wire, Advanced series, Flush Inductive sensor Sensing range mm Short-circuit protection (pulsed) Dimensional drawing 8x Robust brass housing, nickelplated with fine thread 8 x mm 50 Enclosure rating IP 67 Installation flush Ø.9 8x 5 Connection Display LED Fastening nuts ( x); width across, metal C LISTED US IE08-0BNOZT0S IE08-0BNSZT0S IE08-0BPOZT0S IE08-0BPSZT0S IE08-0BNOZWS IE08-0BNSZWS IE08-0BPOZWS IE08-0BPSZWS Accessories Connector, 8, -pin 8, -pin x 0. mm² SICK
13 IE08 Technical specifications IE08-0BNO ZT0S 0BNO ZWS 0BNS ZT0S 0BNS ZWS 0BPO ZT0S 0BPO ZWS 0BPS ZT0S 0BPS ZWS Sensing range S n mm Electrical configuration DC-wire Supply voltage V s DC V Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R Typ. % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Flush Connector, 8, -pin Cable, PVC, m Enclosure rating IP 67 ) ax. switching frequency 000 Hz Dimensions 8 x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a 5 C C Housing material Brass nickel-plated, plastic (PA Tightening torque Typ. 5 Nm Approvals Protection class UL approval culus Listed ) At I a max ) Without load ) Of s r ) According to EN ) Thread diameter x pitch (mm) (Pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steel (VA) Approx. 0.8 Aluminum (solid) Approx. 0.5 Copper (Cu) Approx. 0. Ordering information Part Number IE08-0BNOZT0S 0088 IE08-0BNOZWS 0088 IE08-0BNSZT0S IE08-0BNSZWS IE08-0BPOZT0S 0087 IE08-0BPOZWS IE08-0BPSZT0S IE08-0BPSZWS SICK
14 Inductive sensor, IE series, IE08, DC-wire, Advanced series, Flush Inductive sensor Sensing range mm Short-circuit protection (pulsed) Robust brass housing, nickelplated with fine thread 8 x mm Enclosure rating IP 67 Installation flush Dimensional drawing Connection Display LED Fastening nuts ( x); width across, metal x 5 8 8x C LISTED US IE08-0BNS IE08-0BPS IE08-B5PSVC0S IE08-0BPO Accessories Connector,, -pin, -pin, -pin NO wht NC SICK
15 IE08 Technical specifications IE08-0BNS 0BPS 0BPO B5PS VC0S Sensing range S n Electrical configuration mm DC-wire Supply voltage V s DC V Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R Typ. % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output Output function Installation NPN PNP Normally closed Normally open Flush Enclosure rating IP 67 ) ax. switching frequency Connector,, -pin 000 Hz Dimensions 8 x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a 5 C C Housing material Tightening torque Approvals Protection class UL approval ) At I a max ) Without load Brass nickel-plated, plastic (PA Stainless steel, plastic (PA Typ. 5 Nm culus Listed ) Of s r ) According to EN ) Thread diameter x pitch (mm) (Pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steel (VA) Approx. 0.8 Aluminum (solid) Approx. 0.5 Copper (Cu) Approx. 0. Ordering information Part Number IE08-0BNS 057 IE08-0BPS 0505 IE08-0BPO 0507 IE08-B5PSVC0S SICK 5
16 Inductive sensor, IE series, IE08, DC-wire, Advanced series, Non-flush Inductive sensor Sensing range mm Short-circuit protection (pulsed) Dimensional drawing 8x Robust brass housing, nickel- 0 plated with fine thread 8 x mm Enclosure rating IP Installation non-flush Ø.9 0 8x 5 Connection Display LED Fastening nuts ( x); width across, metal C LISTED US IE08-0NNOZT0S IE08-0NNSZT0S IE08-0NPOZT0S IE08-0NPSZT0S IE08-0NNOZWS IE08-0NNSZWS IE08-0NPOZWS IE08-0NPSZWS Accessories Connector, 8, -pin 8, -pin x 0. mm² 6 SICK
17 IE08 Technical specifications IE08-0NNO ZT0S 0NNO ZWS 0NNS ZT0S 0NNS ZWS 0NPO ZT0S 0NPO ZWS 0NPS ZT0S 0NPS ZWS Sensing range S n mm Electrical configuration DC-wire Supply voltage V s DC V Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R Typ. % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Non-flush Connector, 8, -pin Cable, PVC, m Enclosure rating IP 67 ) ax. switching frequency 000 Hz Dimensions 8 x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a 5 C C Housing material Brass nickel-plated, plastic (PA Tightening torque Typ. 5 Nm Approvals Protection class UL approval culus Listed ) At I a max ) Without load ) Of s r ) According to EN ) Thread diameter x pitch (mm) (Pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steel (VA) Approx. 0.8 Aluminum (solid) Approx. 0.5 Copper (Cu) Approx. 0. Ordering information Part Number IE08-0NNOZT0S IE08-0NNOZWS IE08-0NNSZT0S 0089 IE08-0NNSZWS IE08-0NPOZT0S IE08-0NPOZWS 0089 IE08-0NPSZT0S IE08-0NPSZWS SICK 7
18 Inductive sensor, IE series, IE08, DC-wire, Advanced series, Non-flush Inductive sensor Sensing range mm Short-circuit protection (pulsed) Robust brass housing, nickelplated with fine thread 8 x mm Enclosure rating IP 67 Installation non-flush Dimensional drawing x 5 Connection Display LED Fastening nuts ( x); width across, metal 8x C LISTED US IE08-0NP0 IE08-0NPO Accessories Connector,, -pin, -pin, -pin NO wht NC 8 SICK
19 IE08 Technical specifications IE08-0NPO 0NPS Sensing range S n Electrical configuration mm DC-wire Supply voltage V s DC V Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R Typ. % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output Output function Installation PNP Normally closed Normally open Non-flush Enclosure rating IP 67 ) ax. switching frequency Connector,, -pin 000 Hz Dimensions 8 x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a 5 C C Housing material Tightening torque Approvals Protection class UL approval ) At I a max ) Without load Brass nickel-plated, plastic (PA Typ. 5 Nm culus Listed ) Of s r ) According to EN ) Thread diameter x pitch (mm) (Pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steel (VA) Approx. 0.8 Aluminum (solid) Approx. 0.5 Copper (Cu) Approx. 0. Ordering information Part Number IE08-0NPO 0508 IE08-0NPS SICK 9
20 Inductive sensor, IE series, IE08, DC-wire, Advanced short series, Flush Inductive sensor Sensing range mm Short-circuit protection (pulsed) Dimensional drawing 8x Robust brass housing, nickelplated with fine thread 8 x mm 5 Enclosure rating IP 67 Installation flush Ø.9 5 8x Connection Display LED Fastening nuts ( x); width across, metal C LISTED US IE08-0BNOZT0K IE08-0BNSZT0K IE08-0BPOZT0K IE08-0BPSZT0K IE08-0BNOZWK IE08-0BNSZWK IE08-0BPOZWK IE08-0BPSZWK Accessories Connector, 8, -pin 8, -pin x 0. mm² 0 SICK
21 IE08 Technical specifications IE08-0BNO ZT0K 0BNO ZWK 0BNS ZT0K 0BNS ZWK 0BPO ZT0K 0BPO ZWK 0BPS ZT0K 0BPS ZWK Sensing range S n mm Electrical configuration DC-wire Supply voltage V s DC V Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R Typ. % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Flush Connector, 8, -pin Cable, PVC, m Enclosure rating IP 67 ) ax. switching frequency 000 Hz Dimensions 8 x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a 5 C C Housing material Brass nickel-plated, plastic (PA Tightening torque Typ. 5 Nm Approvals Protection class UL approval culus Listed ) At I a max ) Without load ) Of s r ) According to EN ) Thread diameter x pitch (mm) (Pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steel (VA) Approx. 0.8 Aluminum (solid) Approx. 0.5 Copper (Cu) Approx. 0. Ordering information Part Number IE08-0BNOZT0K 0088 IE08-0BNOZWK 0088 IE08-0BNSZT0K IE08-0BNSZWK IE08-0BPOZT0K 0087 IE08-0BPOZWK IE08-0BPSZT0K IE08-0BPSZWK SICK
22 Inductive sensor, IE series, IE08, DC-wire, Advanced short series, Non-flush Inductive sensor Sensing range mm Short-circuit protection (pulsed) Dimensional drawing 8x Robust brass housing, nickel- plated with fine thread 8 x mm Enclosure rating IP 67 5 Installation non-flush Ø.9 8x 5 Connection Display LED Fastening nuts ( x); width across, metal C LISTED US IE08-0NNOZT0K IE08-0NNSZT0K IE08-0NPOZT0K IE08-0NPSZT0K IE08-0NNOZWK IE08-0NNSZWK IE08-0NPOZWK IE08-0NPSZWK Accessories Connector, 8, -pin 8, -pin x 0. mm² SICK
23 IE08 Technical specifications IE08-0NNO ZT0K 0NNO ZWK 0NNS ZT0K 0NNS ZWK 0NPO ZT0K 0NPO ZWK 0NPS ZT0K 0NPS ZWK Sensing range S n mm Electrical configuration DC-wire Supply voltage V s DC V Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R Typ. % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Non-flush Connector, 8, -pin Cable, PVC, m Enclosure rating IP 67 ) ax. switching frequency 000 Hz Dimensions 8 x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a 5 C C Housing material Brass nickel-plated, plastic (PA Tightening torque Typ. 5 Nm Approvals Protection class UL approval culus Listed ) At I a max ) Without load ) Of s r ) According to EN ) Thread diameter x pitch (mm) (Pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steel (VA) Approx. 0.8 Aluminum (solid) Approx. 0.5 Copper (Cu) Approx. 0. Ordering information Part Number IE08-0NNOZT0K IE08-0NNOZWK IE08-0NNSZT0K 0089 IE08-0NNSZWK IE08-0NPOZT0K IE08-0NPOZWK 0089 IE08-0NPSZT0K IE08-0NPSZWK SICK
24 Inductive sensor, IE series, IE, DC-wire, Standard series, Flush Inductive sensor Sensing range mm Short-circuit protection (pulsed) Dimensional drawing x Robust brass housing, 8 nickel-plated with fine thread 65 x mm Enclosure rating IP 67 Installation flush Ø.9 x 8 6 Connection Display LED Fastening nuts ( x); width across 7, metal C LISTED US IE-0BNS IE-0BPS IE-0BNOZWS IE-0BNSZWS IE-0BPOZWS IE-0BNO IE-0BPO IE-0BPSZWS Accessories Connector,, -pin ounting systems, -pin x 0.5 mm², -pin NO wht NC SICK
25 IE Technical specifications IE- 0BNO 0BNO ZWS 0BNS 0BNS ZWS 0BPO 0BPO ZWS 0BPS 0BPS ZWS Sensing range S n mm Electrical configuration DC-wire Supply voltage V s DC V Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Flush Connector,, -pin Cable, PVC, m Enclosure rating IP 67 ) ax. switching frequency 000 Hz Dimensions x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a 5 C C Housing material Brass nickel-plated, plastic (PA Tightening torque Typ. Nm Approvals Protection class UL approval culus Listed ) At I a max ) Without load ) Of s r ) According to EN ) Thread diameter x pitch (mm) (Pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steel (VA) Approx. 0.8 Aluminum (solid) Approx. 0.5 Copper (Cu) Approx. 0. Ordering information Part Number IE-0BNO 007 IE-0BNOZWS 0076 IE-0BNS 0070 IE-0BNSZWS 007 IE-0BPO 0076 IE-0BPOZWS 0078 IE-0BPS 007 IE-0BPSZWS SICK 5
26 Inductive sensor, IE series, IE, DC-wire, Standard series, Non-flush Inductive sensor Sensing range mm Short-circuit protection (pulsed) Dimensional drawing x Robust brass housing, nickel-plated with fine thread x mm 65 8 Enclosure rating IP 67 Installation non-flush Ø.9 x 8 6 Connection Display LED Fastening nuts ( x); width across 7, metal C LISTED US IE-0NNS IE-0NPS IE-0NNOZWS IE-0NNSZWS IE-0NPOZWS IE-0NNO IE-0NPO IE-0NPSZWS Accessories Connector,, -pin ounting systems, -pin x 0.5 mm², -pin NO wht NC 6 SICK
27 IE Technical specifications IE- 0NNO 0NNO ZWS 0NNS 0NNS ZWS 0NPO 0NPO ZWS 0NPS 0NPS ZWS Sensing range S n mm Electrical configuration DC-wire Supply voltage V s DC V Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Non-flush Connector,, -pin Cable, PVC, m Enclosure rating IP 67 ) ax. switching frequency 000 Hz Dimensions x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a 5 C C Housing material Brass nickel-plated, plastic (PA Tightening torque Typ. Nm Approvals Protection class UL approval culus Listed ) At I a max ) Without load ) Of s r ) According to EN ) Thread diameter x pitch (mm) (Pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steel (VA) Approx. 0.8 Aluminum (solid) Approx. 0.5 Copper (Cu) Approx. 0. Ordering information Part Number IE-0NNO IE-0NNOZWS 0076 IE-0NNS IE-0NNSZWS IE-0NPO 0075 IE-0NPOZWS 0075 IE-0NPS 0078 IE-0NPSZWS SICK 7
28 Inductive sensor, IE series, IE, DC-wire, Short version, Flush Inductive sensor Sensing range mm Short circuit protection (pulsed) Dimensional drawing x Robust brass housing, 9 nickel-plated with fine thread 6 x mm Enclosure rating IP 67 Installation flush Ø.9 x 9 Connection Display LED Fastening nuts ( x); width across 7, metal C LISTED US IE-0BNS IE-0BPS IE-0BNOZWK IE-0BNSZWK IE-0BPOZWK IE-0BNO IE-0BPO IE-0BPSZWK Accessories Connector,, -pin ounting systems, -pin x 0.5 mm², -pin NO wht NC 8 SICK
29 IE Technical specifications IE- 0BNO 0BNO ZWK 0BNS 0BNS ZWK 0BPO 0BPO ZWK 0BPS 0BPS ZWK Sensing range S n mm Electrical configuration DC-wire Supply voltage V s DC V Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Flush Connector,, -pin Cable, PVC, m Enclosure rating IP 67 ) ax. switching frequency 000 Hz Dimensions x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a 5 C C Housing material Brass nickel-plated, plastic (PA Tightening torque Typ. Nm Approvals Protection class UL approval culus Listed ) At I a max ) Without load ) Of s r ) According to EN ) Thread diameter x pitch (mm) (Pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steel (VA) Approx. 0.8 Aluminum (solid) Approx. 0.5 Copper (Cu) Approx. 0. Ordering information Part Number IE-0BNO 007 IE-0BNOZWK 0075 IE-0BNS 0079 IE-0BNSZWK 007 IE-0BPO 0075 IE-0BPOZWK 0077 IE-0BPS 007 IE-0BPSZWK SICK 9
30 Inductive sensor, IE series, IE, DC-wire, Short version, Non-flush Inductive sensor Sensing range mm Short-circuit protection (pulsed) Dimensional drawing x Robust brass housing, nickel-plated with fine thread x mm 6 9 Enclosure rating IP 67 Installation non-flush Ø.9 x 9 Connection Display LED Fastening nuts ( x); width across 7, metal C LISTED US IE-0NNS IE-0NPS IE-0NNOZWK IE-0NNSZWK IE-0NPOZWK IE-0NNO IE-0NPO IE-0NPSZWK Accessories Connector,, -pin ounting systems, -pin x 0.5 mm², -pin NO wht NC 0 SICK
31 IE Technical specifications IE- 0NNO 0NNO ZWK 0NNS 0NNS ZWK 0NPO 0NPO ZWK 0NPS 0NPS ZWK Sensing range S n mm Electrical configuration DC-wire Supply voltage V s DC V Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Non-flush Connector,, -pin Cable, PVC, m Enclosure rating IP 67 ) ax. switching frequency 000 Hz Dimensions x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a 5 C C Housing material Brass nickel-plated, plastic (PA Tightening torque Typ. Nm Approvals Protection class UL approval culus Listed ) At I a max ) Without load ) Of s r ) According to EN ) Thread diameter x pitch (mm) (Pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steel (VA) Approx. 0.8 Aluminum (solid) Approx. 0.5 Copper (Cu) Approx. 0. Ordering information Part Number IE-0NNO IE-0NNOZWK 0076 IE-0NNS IE-0NNSZWK IE-0NPO 0075 IE-0NPOZWK 0075 IE-0NPS 0077 IE-0NPSZWK SICK
32 Inductive sensor, IE series, IE, DC-wire, Advanced series, Flush Inductive sensor Sensing range mm Enhanced sensing range Dimensional drawing x Short-circuit protection (pulsed) 8 Robust brass housing, 65 nickel-plated with fine thread x mm Enclosure rating Ø.9 x Installation flush 8 6 Connection Display LED Fastening nuts ( x); width across 7, metal C LISTED US IE-0BNS IE-0BPS IE-0BNOZWS IE-0BNSZWS IE-0BPOZWS IE-0BNO IE-0BPO IE-0BPSZWS Accessories Connector,, -pin ounting systems, -pin x 0.5 mm², -pin NO wht NC SICK
33 IE Technical specifications IE- 0BNO 0BNO ZWS 0BNS 0BNS ZWS 0BPO 0BPO ZWS 0BPS 0BPS ZWS Sensing range S n mm Electrical configuration DC-wire Supply voltage V s DC V Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Flush Connector,, -pin Cable, PVC, m Enclosure rating IP 67 ) ax. switching frequency 000 Hz Dimensions x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a 5 C C Housing material Brass nickel-plated, plastic (PA Tightening torque Typ. Nm Approvals Protection class UL approval culus Listed ) At I a max ) Without load ) Of s r ) According to EN ) Thread diameter x pitch (mm) (Pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steel (VA) Approx. 0.8 Aluminum (solid) Approx. 0.5 Copper (Cu) Approx. 0. Ordering information Part Number IE-0BNO IE-0BNOZWS IE-0BNS 0077 IE-0BNSZWS 0077 IE-0BPO IE-0BPOZWS IE-0BPS 0076 IE-0BPSZWS SICK
34 Inductive sensor, IE series, IE, DC-wire, Advanced series, Non-flush Inductive sensor Sensing range 8 mm Enhanced sensing range Dimensional drawing x Short-circuit protection (pulsed) Robust brass housing, nickel-plated with fine thread 65 8 x mm Enclosure rating Installation non-flush Ø.9 x 8 6 Connection Display LED Fastening nuts ( x); width across 7, metal C LISTED US IE-08NNS IE-08NPS IE-08NNOZWS IE-08NNSZWS IE-08NPOZWS IE-08NNO IE-08NPO IE-08NPSZWS Accessories Connector,, -pin ounting systems, -pin x 0.5 mm², -pin NO wht NC SICK
35 IE Technical specifications IE- 08NNO 08NNO ZWS 08NNS 08NNS ZWS 08NPO 08NPO ZWS 08NPS 08NPS ZWS Sensing range S n 8 mm Electrical configuration DC-wire Supply voltage V s DC V Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output PNP NPN Output function Normally closed Normally open Installation Non-flush Connector,, -pin Cable, PVC, m Enclosure rating IP 67 ) ax. switching frequency 000 Hz Dimensions x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a 5 C C Housing material Brass nickel-plated, plastic (PA Tightening torque Typ. Nm Approvals Protection class UL approval culus Listed ) At I a max ) Without load ) Of s r ) According to EN ) Thread diameter x pitch (mm) (Pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steel (VA) Approx. 0.8 Aluminum (solid) Approx. 0.5 Copper (Cu) Approx. 0. Ordering information Part Number IE-08NNO 0086 IE-08NNOZWS 0079 IE-08NNS IE-08NNSZWS IE-08NPO 0078 IE-08NPOZWS IE-08NPS IE-08NPSZWS SICK 5
36 Inductive sensor, IE series, IE, DC-wire, Advanced short series, Flush Inductive sensor Sensing range mm Enhanced sensing range Dimensional drawing x Short-circuit protection (pulsed) 9 Robust brass housing, 6 nickel-plated with fine thread x mm Enclosure rating Ø.9 x Installation flush 9 Connection Display LED Fastening nuts ( x); width across 7, metal C LISTED US IE-0BNS IE-0BPS IE-0BNOZWK IE-0BNSZWK IE-0BPOZWK IE-0BNO IE-0BPO IE-0BPSZWK Accessories Connector,, -pin ounting systems, -pin x 0.5 mm², -pin NO wht NC 6 SICK
37 IE Technical specifications IE- 0BNO 0BNO ZWK 0BNS 0BNS ZWK 0BPO 0BPO ZWK 0BPS 0BPS ZWK Sensing range S n mm Electrical configuration DC-wire Supply voltage V s DC V Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Flush Connector,, -pin Cable, PVC, m Enclosure rating IP 67 ) ax. switching frequency 000 Hz Dimensions x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a 5 C C Housing material Brass nickel-plated, plastic (PA Tightening torque Typ. Nm Approvals Protection class UL approval culus Listed ) At I a max ) Without load ) Of s r ) According to EN ) Thread diameter x pitch (mm) (Pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steel (VA) Approx. 0.8 Aluminum (solid) Approx. 0.5 Copper (Cu) Approx. 0. Ordering information Part Number IE-0BNO IE-0BNOZWK IE-0BNS 0077 IE-0BNSZWK 0077 IE-0BPO IE-0BPOZWK IE-0BPS 0076 IE-0BPSZWK SICK 7
38 Inductive sensor, IE series, IE, DC-wire, Advanced short series, Non-flush Inductive sensor Sensing range 8 mm Enhanced sensing range Dimensional drawing x Short-circuit protection (pulsed) Robust brass housing, nickel-plated with fine thread 6 9 x mm Enclosure rating IP 67 Installation non-flush Ø.9 x 9 Connection Display LED Fastening nuts ( x); width across 7, metal C LISTED US IE-08NNS IE-08NPS IE-08NNOZWK IE-08NNSZWK IE-08NPOZWK IE-08NNO IE-08NPO IE-08NPSZWK Accessories Connector,, -pin ounting systems, -pin x 0.5 mm², -pin NO wht NC 8 SICK
39 IE Technical specifications IE- 08NNO 08NNO ZWK 08NNS ZCOK 08NNS ZWK 08NPO 08NPO ZWK 08NPS 08NPS ZWK Sensing range S n 8 mm Electrical configuration DC-wire Supply voltage V s DC V Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Non-flush Connector,, -pin Cable, PVC, m Enclosure rating IP 67 ) ax. switching frequency 000 Hz Dimensions x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a 5 C C Housing material Brass nickel-plated, plastic (PA Tightening torque Typ. Nm Approvals Protection class UL approval culus Listed ) At I a max ) Without load ) Of s rr ) According to EN ) Thread diameter x pitch (mm) (Pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steel (VA) Approx. 0.8 Aluminum (solid) Approx. 0.5 Copper (Cu) Approx. 0. Ordering information Part Number IE-08NNO 0079 IE-08NNOZWK 0079 IE-08NNSZCOK IE-08NNSZWK IE-08NPO 0078 IE-08NPOZWK IE-08NPS IE-08NPSZWK SICK 9
40 Inductive sensor, IE series, IE8, DC-wire, Standard series, Flush Sensing range 5 mm Dimensional drawing Inductive sensor Short-circuit protection (pulsed) Robust brass housing, nickel-plated with fine thread 8 x mm x Enclosure rating IP 67 Installation flush Ø.9 8x 5 67 Connection Display LED Fastening nuts ( x); width across, metal C LISTED US IE8-05BNO IE8-05BPO IE8-05BNOZWS IE8-05BNSZWS IE8-05BPOZWS IE8-05BNS IE8-05BPSZ0S IE8-05BPSZWS Accessories Connector,, -pin ounting systems, -pin x 0.5 mm², -pin wht NC NO 0 SICK
41 IE8 Technical specifications IE8-05BNO 05BNO ZWS 05BNS 05BNS ZWS 05BPO 05BPO ZWS 05BPS 05BPS ZWS Sensing range S n 5 mm Electrical configuration DC-wire Supply voltage V s DC V Nominal voltage V n DC Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Flush Connector,, -pin Cable, PVC, m Enclosure rating IP 67 ) ax. switching frequency 000 Hz Dimensions 8 x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a 5 C C Housing material Brass nickel-plated, plastic (PA Tightening torque 0 Nm Approvals Protection class UL approval culus Listed ) At I a max ) Without load ) Of s r ) According to EN ) Thread diameter x pitch (mm) (Pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steel (VA) Approx. 0.8 Aluminum (solid) Approx. 0.5 Copper (Cu) Approx. 0. Ordering information Part Number IE8-05BNO 0096 IE8-05BNOZWS 0098 IE8-05BNS 009 IE8-05BNSZWS 009 IE8-05BPO 0098 IE8-05BPOZWS 0090 IE8-05BPS 009 IE8-05BPSZWS SICK
42 Inductive sensor, IE series, IE8, DC-wire, Standard series, Non-flush Sensing range 8 mm Dimensional drawing Inductive sensor Short-circuit protection (pulsed) Robust brass housing, nickel-plated with fine thread 8 x mm Enclosure rating IP 67 Installation non-flush Ø x 8x 5 67 Connection Display LED Fastening nuts ( x); width across, metal C LISTED US IE8-08NNO IE8-08NPO IE8-08NNOZWS IE8-08NNSZWS IE8-08NPOZWS IE8-08NNS IE8-08NPS IE8-08NPSZWS Accessories Connector,, -pin ounting systems, -pin x 0.5 mm², -pin wht NC NO SICK
43 IE8 Technical specifications IE8-08NNO 08NNO ZWS 08NNS 08NNS ZWS 08NPO 08NPO ZWS 08NPS 08NPS ZWS Sensing range S n 8 mm Electrical configuration DC-wire Supply voltage V s DC V Nominal voltage V n DC Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Non-flush Connector,, -pin Cable, PVC, m Enclosure rating IP 67 ) ax. switching frequency 000 Hz Dimensions 8 x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a 5 C C Housing material Brass nickel-plated, plastic (PA Tightening torque 0 Nm Approvals Protection class UL approval culus Listed ) At I a max ) Without load ) Of s r ) According to EN ) Thread diameter x pitch (mm) (Pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steel (VA) Approx. 0.8 Aluminum (solid) Approx. 0.5 Copper (Cu) Approx. 0. Ordering information Part Number IE8-08NNO 0096 IE8-08NNOZWS 0096 IE8-08NNS IE8-08NNSZWS IE8-08NPO 0095 IE8-08NPOZWS IE8-08NPS IE8-08NPSZWS SICK
44 Inductive sensor, IE series, IE8, DC-wire, Short version, Flush Sensing range 5 mm Dimensional drawing Inductive sensor Short-circuit protection (pulsed) Robust brass housing, nickel-plated with fine thread 8 x mm 50 8x Enclosure rating IP 67 Installation flush Ø.9 8x 8 Connection Display LED Fastening nuts ( x); width across, metal C LISTED US IE8-05BNO IE8-05BPO IE8-05BNOZWK IE8-05BNSZWK IE8-05BPOZWK IE8-05BNS IE8-05BPS IE8-05BPSZWK Accessories Connector,, -pin ounting systems, -pin x 0.5 mm², -pin wht NC NO SICK
45 IE8 Technical specifications IE8-05BNO 05BNO ZWK 05BNS 05BNS ZWK 05BPO 05BPO ZWK 05BPS 05BPS ZWK Sensing range S n 5 mm Electrical configuration DC-wire Supply voltage V s DC V Nominal voltage V n DC Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Flush Connector,, -pin Cable, PVC, m Enclosure rating IP 67 ) ax. switching frequency 000 Hz Dimensions 8 x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a 5 C C Housing material Brass nickel-plated, plastic (PA Tightening torque 0 Nm Approvals Protection class UL approval culus Listed ) At I a max ) Without load ) Of s r ) According to EN ) Thread diameter x pitch (mm) (Pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steel (VA) Approx. 0.8 Aluminum (solid) Approx. 0.5 Copper (Cu) Approx. 0. Ordering information Part Number IE8-05BNO 0095 IE8-05BNOZWK 0097 IE8-05BNS 009 IE8-05BNSZWK 009 IE8-05BPO 0097 IE8-05BPOZWK 0099 IE8-05BPS 009 IE8-05BPSZWK SICK 5
46 Inductive sensor, IE series, IE8, DC-wire, Short version, Non-flush Sensing range 8 mm Dimensional drawing Inductive sensor Short-circuit protection (pulsed) Robust brass housing, nickel-plated with fine thread 8 x mm Enclosure rating IP 67 Installation non-flush Ø x 8x 8 Connection Display LED Fastening nuts ( x); width across, metal C LISTED US IE8-08NNO IE8-08NPO IE8-08NNOZWK IE8-08NNSZWK IE8-08NPOZWK IE8-08NNS IE8-08NPS IE8-08NPSZWK Accessories Connector,, -pin ounting systems, -pin x 0.5 mm², -pin wht NC NO 6 SICK
47 IE8 Technical specifications IE8-08NNO 08NNO ZWK 08NNS 08NNS ZWK 08NPO 08NPO ZWK 08NPS 08NPS ZWK Sensing range S n 8 mm Electrical configuration DC-wire Supply voltage V s DC V Nominal voltage V n DC Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Non-flush Connector,, -pin Cable, PVC, m Enclosure rating IP 67 ) ax. switching frequency 000 Hz Dimensions 8 x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a 5 C C Housing material Brass nickel-plated, plastic (PA Tightening torque 0 Nm Approvals Protection class UL approval culus Listed ) At I a max ) Without load ) Of s r ) According to EN ) Thread diameter x pitch (mm) (Pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steel (VA) Approx. 0.8 Aluminum (solid) Approx. 0.5 Copper (Cu) Approx. 0. Ordering information Part Number IE8-08NNO 0096 IE8-08NNOZWK 0096 IE8-08NNS IE8-08NNSZWK IE8-08NPO 0095 IE8-08NPOZWK IE8-08NPS 0099 IE8-08NPSZWK SICK 7
48 Inductive sensor, IE series, IE8, DC-wire, Advanced series, Flush Sensing range 8 mm Dimensional drawing Inductive sensor Enhanced sensing range Short-circuit protection (pulsed) Robust brass housing, nickel-plated with fine thread x 8 x mm Enclosure rating IP 67 Installation flush Ø.9 8x 5 67 Connection Display LED Fastening nuts ( x); width across, metal C LISTED US IE8-BNO IE8-08BPO IE8-08BNOZWS IE8-08BNSZWS IE8-08BPOZWS IE8-08BNS IE8-08BPS IE8-08BPSZWS Accessories Connector,, -pin ounting systems, -pin x 0.5 mm², -pin wht NC NO 8 SICK
49 IE8 Technical specifications IE8-08BNO 08BNO ZWS 08BNS 08BNS ZWS 08BPO 08BPO ZWS 08BPS 08BPS ZWS Sensing range S n 8 mm Electrical configuration DC-wire Supply voltage V s DC V Nominal voltage V n DC Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Flush Connector,, -pin Cable, PVC, m Enclosure rating IP 67 ) ax. switching frequency 000 Hz Dimensions 8 x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a 5 C C Housing material Brass nickel-plated, plastic (PA Tightening torque 0 Nm Approvals Protection class UL approval culus Listed ) At I a max ) Without load ) Of s r ) According to EN ) Thread diameter x pitch (mm) (Pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steel (VA) Approx. 0.8 Aluminum (solid) Approx. 0.5 Copper (Cu) Approx. 0. Ordering information Part Number IE8-08BNO IE8-08BNOZWS IE8-08BNS 0097 IE8-08BNSZWS IE8-08BPO IE8-08BPOZWS 0097 IE8-08BPS IE8-08BPSZWS SICK 9
50 Inductive sensor, IE series, IE8, DC-wire, Advanced series, Non-flush Sensing range mm Dimensional drawing Inductive sensor Enhanced sensing range Short-circuit protection (pulsed) Robust brass housing, nickel-plated with fine thread 8 x mm Enclosure rating IP 67 Installation non-flush Ø x 8x 5 67 Connection Display LED Fastening nuts ( x); width across, metal C LISTED US IE8-NNO IE8-NPO IE8-NNOZWS IE8-NNSZWS IE8-NPOZWS IE8-NNS IE8-NPS IE8-NPSZWS Accessories Connector,, -pin ounting systems, -pin x 0.5 mm², -pin wht NC NO 50 SICK
51 IE8 Technical specifications IE8- NNO NNO ZWS NNS NNS ZWS NPO NPO ZWS NPS NPS ZWS Sensing range S n mm Electrical configuration DC-wire Supply voltage V s DC V Nominal voltage V n DC Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Non-flush Connector,, -pin Cable, PVC, m Enclosure rating IP 67 ) ax. switching frequency 000 Hz Dimensions 8 x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a 5 C C Housing material Brass nickel-plated, plastic (PA Tightening torque 0 Nm Approvals Protection class UL approval culus Listed ) At I a max ) Without load ) Of s r ) According to EN ) Thread diameter x pitch (mm) (Pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steel (VA) Approx. 0.8 Aluminum (solid) Approx. 0.5 Copper (Cu) Approx. 0. Ordering information Part Number IE8-NNO 0099 IE8-NNOZWS IE8-NNS IE8-NNSZWS 0099 IE8-NPO IE8-NPOZWS IE8-NPS 0098 IE8-NPSZWS SICK 5
52 Inductive sensor, IE series, IE8, DC-wire, Advanced short series, Flush Sensing range 8 mm Dimensional drawing Inductive sensor Enhanced sensing range Short-circuit protection (pulsed) Robust brass housing, nickel-plated with fine thread 50 8x 8 x mm Enclosure rating IP 67 Installation flush Ø.9 8x 8 Connection Display LED Fastening nuts ( x); width across, metal C LISTED US IE8-08BNO IE8-08BPO IE8-08BNOZWK IE8-08BNSZWK IE8-08BPOZWK IE8-08BNS IE8-08BPS IE8-08BPSZWK Accessories Connector,, -pin ounting systems, -pin x 0.5 mm², -pin wht NC NO 5 SICK
53 IE8 Technical specifications IE8-08BNO 08BNO ZWK 08BNS 08BNS ZWK 08BPO 08BPO ZWK 08BPS 08BPS ZWK Sensing range S n 8 mm Electrical configuration DC-wire Supply voltage V s DC V Nominal voltage V n DC Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Flush Connector,, -pin Cable, PVC, m Enclosure rating IP 67 ) ax. switching frequency 000 Hz Dimensions 8 x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a 5 C C Housing material Brass nickel-plated, plastic (PA Tightening torque 0 Nm Approvals Protection class UL approval culus Listed ) At I a max ) Without load ) Of s r ) According to EN ) Thread diameter x pitch (mm) (Pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steel (VA) Approx. 0.8 Aluminum (solid) Approx. 0.5 Copper (Cu) Approx. 0. Ordering information Part Number IE8-08BNO IE8-08BNOZWK IE8-08BNS 0097 IE8-08BNSZWK IE8-08BPO IE8-08BPOZWK 0097 IE8-08BPS IE8-08BPSZWK SICK 5
54 Inductive sensor, IE series, IE8, DC-wire, Advanced short series, Non-flush Sensing range mm Dimensional drawing Inductive sensor Enhanced sensing range Short-circuit protection (pulsed) Robust brass housing, nickel-plated with fine thread 8 x mm Enclosure rating IP 67 Installation non-flush Ø x 8x 8 Connection Display LED Fastening nuts ( x); width across, metal C LISTED US IE8-NNO IE8-NPO IE8-NNOZWK IE8-NNSZWK IE8-NPOZWK IE8-NNS IE8-NPS IE8-NPSZWK Accessories Connector,, -pin ounting systems, -pin x 0.5 mm², -pin wht NC NO 5 SICK
Dimensional drawing. Connection type IME08-1B5NOZT0S IME08-1B5NSZT0S IME08-1B5POZT0S IME08-1B5PSZT0S. 3 x 0.14 mm². brn. L+ Schließer/ Öffner M.
Inductive sensor, IE series, IE08, DC-wire, Standard series, Flush Inductive sensor Sensing range.5 mm Short-circuit protection (pulsed) Dimensional drawing 8x Robust brass housing, nickelplated with fine
More informationInductive sensor NI10-M18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M18 x 1 Chrome-plated brass DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR) M12
More informationInductive proximity sensors IM 12 series, sensing range 2 / 4 mm DC 3-wire, metal housing
Inductive proximity sensors IM series, sensing range / mm wire, metal housing Mx, 60 Dimensions in mm Mx 5 5 50 0, 60 Standard series Features Can be installed flush or nonflush in metal or output Normally
More informationLaser diffuse reflection light scanner with background suppression. Dimensioned drawing
Specifications and description HRTL 3B Laser diffuse reflection light scanner with background suppression Dimensioned drawing We reserve the right to make changes DS_HRTL3B_en.fm en 01-2010/12 50114049
More informationMagnetic proximity switches
Magnetic proximity switches Magnetic proximity switches Overview Page 38 Functional principle and installation Page 39 Cylindrical designs Page 41 Rectangular designs Page 42 37 Kurzübersicht Magnetoresistive
More informationProximity Sensors Inductive Thermoplastic Polyester Housing Types EI, DC, M 12, M 18, M 30
Proximity Sensors Inductive Thermoplastic Polyester Housing Types EI, DC, M 12, M 18, M 30 Euronorm thermoplastic polyester housing, cylindrical Diameter: M 12, M 18, M 30. Sensing distance: 2 to 15 mm
More informationTechnical Data. Dimensions
0102 Model Number Features Comfort series 5 mm flush Usable up to SIL 2 acc. to IEC 61508 Accessories BF 18 Mounting flange, 18 mm EXG-18 Quick mounting bracket with dead stop Technical Data specifications
More informationTable of Contents, Magnetic Field Sensors. Introduction to Magnetic Field Sensors... 380
Proximity Switches Table of Contents, Magnetic Field Sensors Proximity Sensors.3 Magnetic Field Sensors.2.3 Introduction to Magnetic Field Sensors... 380 Operating Distance and Responsiveness Mounting
More informationTechnical Data. General specifications Switching element function PNP NO/NC Rated operating distance s n 8 mm
Model Number Features Increased operating distance 8 mm flush ATEX-approval for zone and zone Accessories BF 8 Mounting flange, 8 mm EXG-8 Quick mounting bracket with dead stop Technical Data specifications
More informationInductive sensors. Compact, fast, reliable. Edition 2013
Inductive sensors. Compact, fast, reliable. Edition 2013 Indispensable in all machines Non-contacting, inductive proximity sensors play a major role in automation technology all over the world. For several
More informationW150: Miniature photoelectric switch series with completely integrated electronics
Product group W50 Photoelectric proximity switch BGS Photoelectric proximity switch energ. Photoelectric reflex switch W50: iniature photoelectric switch series with completely integrated electronics Through-beam
More informationTechnical Data. General specifications Switching element function Rated operating distance s n 5 mm
0102 Model Number Features 5 mm non-flush Usable up to SIL 2 acc. to IEC 61508 Technical Data specifications Switching element function NAMUR, NC Rated operating distance s n 5 mm Installation non-flush
More informationOPERATING PRINCIPLES FOR PHOTOELECTRIC SENSORS
OPERATING PRINCIPLES FOR PHOTOELECTRIC SENSORS Photoelectric These sensors use light sensitive elements to detect objects and are made up of an emitter (light source) and a receiver. Four types of photoelectric
More informationintelligent solutions
Lichtschranken W 8- Photoelectric Baureihe switches WL - Photoelectric proximity switches, BGS Photoelectric reflex switches Through-beam photoelectric switches W 8-: Integrated stateof-the-art technology
More informationW 36: Mastering complex tasks reliably
Lichtschranken W Photoelectric Baureihe switches WL - Photoelectric proximity switches, BGS Photoelectric reflex switches W : astering complex tasks reliably Through-beam photoelectric switches for temperatures
More informationTechnical Data. General specifications Switching element function Rated operating distance s n 5 mm
0102 Model Number Features 5 mm flush Usable up to SIL 2 acc. to IEC 61508 Accessories EXG-18 Quick mounting bracket with dead stop BF 18 Mounting flange, 18 mm Technical Data specifications Switching
More informationTechnical Data. General specifications Switching element function Rated operating distance s n 15 mm
0102 Model Number Features Comfort series 15 mm flush Accessories MHW 01 Modular mounting bracket MH 04-2057B Mounting aid for VariKont and +U1+ Technical Data General specifications Switching element
More informationPhotoelectric switches WLL 170(T), fibre-optic cables LL 3: flexible solutions with fibre-optic cable systems
WLL 0(T) Photoelectric switches Photoelectric switches with fibre-optic cable Proximity mode Photoelectric switches with fibre-optic cable Through-beam mode Photoelectric switches WLL 0(T), fibre-optic
More informationCapacitive sensors. Versatile, contactless, durable Edition 2012/2013
Capacitive sensors Versatile, contactless, durable Edition 2012/2013 With capacitive sensors from Baumer you can complete almost any task. Invative all-rounders. Capacitive sensors can detect metallic,
More informationPD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description
Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.
More informationDigital display DA 48
Loop powered plug-in LCD display No auxiliary energy source needed Scale freely adjustable on site Can be turned to any position Suitable for any 0 ma transmitter with EN 175301-803A connector Digital
More informationInductive Proximity Sensors
M12 Inductive Proximity Sensors Standard Length Mini's Extended Sensing 3 Wire DC 2 Wire DC 2 Wire AC (Wiring Schematic) 3 Wire DC PNP Normally Open (1) IMM32122C IMM35124C IMN32122C IMN35124C IMN32122M12
More informationOrdering Information. Cylindrical Proximity Sensor E2E/E2E2
Cylindrical Sensor E2E/E2E2 A New Series of Easy-to-use and Tough E2E/E2E2 Models Long-size E2E2 Sensor Conforms to CENELEC Ideal for a variety of applications. With a metal connector that can be tightened
More informationMagnetic field sensor for pneumatic cylinders BIM-INT-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Rectangular, height 6mm Plastic, PA12 Magnetic-inductive sensor DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6
More information96 Variants. The GlobalProx range increases in popularity. 12 PNP Normally-open 12 PNP Normally-closed 12 NPN Normally-open 12 NPN Normally-closed
BCS00K9 BCS00LK BCS00LL BCS00LM BCS00LN BCS00LP BCS00LR BCS00LT BCS00LU BCS00LW BCS00LY BCS00LZ BCS00M0 BCS00M1 BCS00M2 BCS00M3 BCS00M4 BCS00M5 BCS00M6 BCS00M7 BCS00M8 BCS00M9 BCS00MA BCS00MC BCS00ME BCS00MF
More informationOperating instructions Capacitive sensors
Operating instructions Capacitive sensors UK 700 / 00 0 / 009 Contents Safety instructions Functions and features Installation. Notes on flush and non-flush installation Electrical connection. Wiring.
More informationTechnical Data. Dimensions
0102 Model Number Features 15 mm quasi flush Usable up to SIL2 acc. to IEC 61508 Accessories BF 30 Mounting flange, 30 mm V1-G-N-2M-PUR Female cordset, M12, 2-pin, NAMUR, PUR cable V1-W-N-2M-PUR Female
More informationHow To Use A Flowmeter
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
More informationE2EL Ø 6,5 M8 / Plug M8 M8 / Plug M12 E2EL
High Frequency Inductive Proximity Sensor Increased response frequency for high speed applications Max 5 khz, switching frequency M8 or dia 6.5 mm housing Brass or stainless steel housing Ordering Information
More informationPart number NPN E2EM-X2C1 E2EM-X2C2 PNP E2EM-X2B1 E2EM-X2B2 NPN E2EM-X4C1 E2EM-X4C2 PNP E2EM-X4B1 E2EM-X4B2
R Extended Range Inductive Prox Greater Sensing Distance Offers Greater Design Flexibility H Sensing distances approximately 1.5 to 2 times larger than that of any conventional Sensor H Reduces problems
More informationCapacitive Prox E2K-X
Capacitive Prox Threaded, Cylindrical Sensor Detects Metallic and Non-metallic Objects Permits non-contact detection of metallic and non-metallic objects such as glass, wood, water, oil and plastic Allows
More informationW 260: Standard photoelectric switch series for a broad range of applications
W 0 Photoelectric switches Photoelectric proximity switches, BGS Photoelectric proximity switches, energetic Photoelectric reflex switches W 0: Standard photoelectric switch series for a broad range of
More informationW 27-2: The photoelectric switch series with expanded possibilities
W - Photoelectric switches Photoelectric proximity switches, BGS Photoelectric reflex switches Through-beam photoelectric switches W -: The photoelectric switch series with expanded possibilities metres
More informationLUT Luminescence scanners: Seeing what no-one else can
LUT Luminescence scanners Luminescence scanners LUT Luminescence scanners: Seeing what no-one else can Special features: A semi-conductor light source is used in the LUT series no lamp change required.
More informationHow To Make An Ultrasonic Sensor
crm+ ultrasonic sensors Microsonic : TR Electronic: Tel: +49 231 975151-0 USA: 248-244-2280 Fax: +49 231 975151-51 Canada: 519-452-1233 www.microsonic.de www.trelectronic.com info@microsonic.de Description
More informationcrm+25/d/tc/e Extract from our online catalogue: Current to: 2015-10-26
Extract from our online catalogue: crm+25/d/tc/e Current to: 2015-10-26 microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Germany / T +49 231 975151-0 / F +49 231 975151-51 / E info@microsonic.de
More informationCompact Sensors - S8 Series. Compact size and high performance for the most challenging detection applications
Compact size and high performance for the most challenging detection applications Compact dimensions (14x42x25 mm) Background suppression for transparent and shiny objects High speed contrast sensor up
More informationTechnical data. General specifications. Indicators/operating means. 30 Hz Multiplex operation 30 Hz / n, n = number of sensors, n 5
Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 000 programmable switch outputs Hysteresis
More informationW 2: Subminiature photoelectric switch series: extremely small and extremely strong
Photoelectric proximity switches BGS Photoelectric proximity switches energetic, (V optics) Photoelectric reflex switches Through-beam photoelectric switches W : Subminiature photoelectric switch series:
More informationCross-beam scanning system to detect slim objects. 100 mm 3.937 in
891 Object Area Sensor General terms and conditions... F-17 Related Information Glossary of terms... P.1359~ Sensor selection guide...p.831~ General precautions... P.1405 PHOTO PHOTO Conforming to EMC
More informationConductive Level Switch FK 2 Technical Data:
Level switch for conductive liquids Optional electrode length adjustment Hygienic installation in accordance with EHEDG Wetted parts compatible with FDA requirements Potted electronic Not influenced by
More informationOnline data sheet PET-1CB010N10SVMC PET PRESSURE SENSORS
Online data sheet PET-1CB010N10SVMC PET B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Features Pressure type Measuring range Ordering information Other models and
More informationsensors Miniature Sensors - S100 The universal miniature photoelectric sensor
Miniature Sensors - S1 The universal miniature photoelectric sensor Two threaded front mounting holes Two slotted rear mounting holes Anti-tampering sensor (no adjustment) Standard optic functions and
More informationOrdering Information. Short Barrel Inductive Prox E2E3-WIREDC. Short Barrel 3-Wire Prox Sensors Meet IP67
R Short Barrel Inductive Prox E2E3-WIREDC Short Barrel 3-Wire Prox Sensors Meet IP67 H Thick nickel-plated brass barrel has wrench flats for easy installation H Solid potted internal circuitry withstands
More informationTechnical Data. General specifications Switching element function Rated operating distance s n 4 mm
0102 Model Number Features 4 mm non-flush Usable up to SIL 3 acc. to IEC 61508 Application Danger! In safety-related applications the sensor must be operated with a qualified fail safe interface from Pepperl+Fuchs,
More informationColor Mark Sensor with Red or Green LED E3S-VS
Color Mark Sensor with Red or Green LED Rugged IP67 Color Mark Sensor 1 ms response time Detects a wide variety of color marks PNP or NPN output ls Light-on/ Dark-on operation, wire selectable Vertical
More informationElectronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm
Electronic pressure measurement Electronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm WIKA data sheet PE 81.67 Applications Machine tools Hydraulics
More informationOEM Pressure Transmitters for heavy-duty applications, Type MBS 1200 and MBS 1250
MAKING MODERN LIVING POSSIBLE Data sheet OEM Pressure Transmitters for heavy-duty applications, Type MBS 1200 and MBS 1250 The compact OEM pressure transmitter programme is designed for use in severe hydraulic
More informationFast, reliable, ultra-precise. My-Com precision switches.
Fast, reliable, ultra-precise.. Unrivaled 1 μm repeat accuracy Setting reference points, monitoring tolerances, controlling, adjusting. Fast, reliable, ultra-precise. Uncompromising accuracy tried and
More informationCapacitive sensors. Versatile, contactless, durable Edition 2012/2013
Capacitive sensors Versatile, contactless, durable Edition 2012/2013 With capacitive sensors from Baumer you can complete almost any task. Visibly better: Baumer sensors. The Baumer Group is an internationally
More informationNew XUY roller sensors
Do you want to simplify the sensor integration in your conveyor systems? New XUY roller sensors for packet, boxes, letters on roller conveyors. Telemecanique Sensor s OsiSense TM XUY photoelectric sensors
More informationHow To Control A Power Supply With A Mini Transmitter And Switch (Power Supply)
transmitter (2 wire) / switch for continuous or On/Off Control Indication, monitoring, transmitting and continuous or On/Off control in one device Output signal 4...20 ma, 2-wire for continuous control
More informationE2FM. Inductive Proximity Sensor in full metal housing. Application. Continuous Impact Test. Brush Test
Inductive Proximity Sensor in full metal housing Full body stainless steel housing for highest mechanical protection Low frequency modulation for metal chip immunity Flame retardant cable for high protection
More informationThroughbeam photoelectric sensors. Dimensioned drawing. Electrical connection
Specifications and description Leuze electronic LS 78 Throughbeam photoelectric sensors Dimensioned drawing 180m 10-30 V DC! Voltage range from 12 30VDC with NPN, PNP and/or relay outputs! Light/dark switching!
More informationtechnical data (according to IEC 60947-5-2)
Photoelectric sensors: Series 3#30 & 3#31 ü Complete miniature sensor series mm in rugged Crastin housings ü Shock & vibration resistant due to fully vacuum-potted electronics ü Diffuse sensors with precise
More informationHousing diameter Shaft diameter 1. Flange (Mounting of housing) Protection class shaft input (EN 60529) Protection class housing (EN 60529)
Direct mounting without coupling Flexible hollow shaft design up to diameter 4 mm Through hollow shaft or as end shaft (blind shaft) Easy installation by means of clamping shaft or blind shaft Short overall
More informationElectronic Pressure Switch EDS 300
Electronic Pressure Switch EDS 300 User manual Page 2 of 16 Content 1. Functions of the EDS 300...3 2. Mounting...3 3. Operating keys on the membrane keypad...4 4. Digital display...4 5. Output function...5
More informationDMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO from 0... 00 mbar up to 0... 40 bar Output signals
More informationRoHS. Shock / vibration resistant. Magnetic field proof. Many variants
Sendix 5000 / 500 (Shaft / Hollow shaft) Push-Pull / RS4 ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors.
More informationW 18-3: Incorporated application Know-how, expanded functionality, high level of equipment availability
Photoelectric proximity switches, FGS Photoelectric reflex switches Through-beam photoelectric switches W -: Incorporated application Know-how, expanded functionality, high level of equipment availability
More informationcrm+130/iu/tc/e Extract from our online catalogue: Current to: 2016-04-21
Extract from our online catalogue: crm+130/iu/tc/e Current to: 2016-04-21 microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Germany / T +49 231 975151-0 / F +49 231 975151-51 / E info@microsonic.de
More informationSeries 8146/5-V37 and Series 8150/5-V37
www.stahl.de > Clear assignment safe technology easy installation > Intelligent structure only one rotary actuator for frequency-controlled drives ) 20 ms leading auxiliary contact for safe motor disconnection
More informationTechnical data. General specifications. Indicators/operating means. Electrical specifications Operating voltage U B Power consumption P 0 Interface
Release date: 06-0- 09: Date of issue: 06-0- 009_eng.xml Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service
More informationBOS 73K... BOS 74K...
BFB/BOS When there s no space for a photoelectric sensor, there is only one solution: user fiber optics! If there are no particular demands for toughness an ambient temperature or chemical resistance,
More information4 Posiflow Proportional Solenoid Valves
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
More informationSENSORS. Miniature Sensors - S3Z. Advanced line of miniature Asian style of photoelectric sensors. 40-300 mm background suppression
Advanced line of miniature Asian style of photoelectric sensors 4-3 background suppression.7 m proximity, 15 with narrow beam 4 m polarized retroreflective 3 m LASER through beam Standard 3-wire output
More informationTECHNICAL DATASHEET Incremental Encoder RI 58-D / RI 58TD
Direct mounting without coupling Flexible hollow shaft design up to diameter 4 mm Through hollow shaft or as end shaft (blind shaft) Easy installation by means of clamping shaft or blind shaft Short overall
More informationTubular Analog model resolution: 0,5 mm (SLOW mode), 1 mm (FAST mode) Right angle Repeatibility: 0,7 mm Vdc
Ultrasonic sensors for high precision detection of clear and transparent objects Clear object detection, inspection on transparent or highly reflective film and liquid level measurement Standard M18 tubular
More informationPositive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of
More informationIntroduction to Fiber Optic Cables. Photoelectric Sensors. 2Photoelectric Sensors, Standard Sensors, Fiber optic cables. Please Note!
Photoelectric, Standard, optic cables Photoelectric Introduction to Optic s Optic Diffuse and Thru-Beam Mode In applications involving small targets or unfavorable conditions, fiber optic cables may be
More informationSystem 8. ü www.nassmagnet.com ( +49 511 6746-0. System 8
System 8 ü www.nassmagnet.com ( +9 11 7-0 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures
More informationDigital input modules
8 172 TX-I/O Digital input modules TXM1.8D TXM1.16D Two fully compatible versions: TXM1.8D: 8 inputs, each with a three-color LED (green, yellow or red) TXM1.16D: As TXM1.8X, but 16 inputs, each with a
More informationV180-2 M18 Cylindrical Photoelectric Sensor Series
D ata S h e e t V80-8 Cylindrical Photoelectric Sensor Series A rounded concept, not only economically. Cylindrical photoelectric switches offer the benefits of very fast commissioning and compact design.
More informationSafety technique. Emergency stop module BO 5988 safemaster
Safety technique Emergency stop module BO 5988 safemaster 0221562 Function diagram Pushbutton on Mains or emergencystop () K1 According to EC Directive for machines 98/37/EG According to IEC/E 60204-1
More informationAssisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way
More informationTECHNICAL DATASHEET Incremental Encoder RI 58-O / RI 58-T
Universal industry standard encoder Up to 40 000 steps with 0 000 pulses High signal accuracy Protection class up to IP67 Flexible due to many flange and configuration variants Suitable for high shock
More informationPM SERIES. Extremely small size enables space saving and quick installation! U-shaped Micro Photoelectric Sensor. Extremely small
EQ-00 VF NX MS-AJ RT-0 PX- CY PHOTOELECTRIC SENSORS Mounting Stand SERIES U-shaped Micro Photoelectric PNP output type available Extremely small Ultra-small type -4(-R) contributes to the miniaturization
More informationFerrostat Speed Sensor Series DSF Explosion Proof Versions EEx
Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx DSF..10.**.HV Ex ATEX Operating Instructions 374E-64368 Valid from lot nr. 0103 General Function Use in potentially explosive environment
More informationTurbine Flow Sensor Series VTR
Turbine Flow Sensor Series VTR SIKA Turbine Flow Sensor Series VTR Extra robust, impressively precise SIKA s VTR turbine flow sensor allows you to determine precisely, dependably and easily the flow rates
More information48 SERIES Relay interface modules 10 A
48 Relay interface modules 10 A 1 CO relay interface modules, mm wide Ideal interface for PLC and electronic systems Type 48.P3 1 CO 10 A s Type 48.31 1 CO 10 A s AC coils or DC sensitive coils Supply
More information0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N
55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
More information48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0.
48 Series - Relay interface modules 8 A Features 48.12 2 Pole Safety relay interface modules, 15.8 mm wide 48.12-2 Pole 8 A (screw terminal) DC sensitive coils Relay with forcibly guided contacts according
More informationContactless Encoder RI360P0-QR24M0-INCRX2-H1181
Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512, 1000, 1024, 2048, 2500, 3600, 4096, parametr.
More informationDescription. Dimensions. Features. www.pwb-encoders.com. precision works better
Description The MEC22 is a high resolution optical hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder provides two square wave outputs in quadrature
More informationHow To Power A Schen
Automation / Mini Type SCH32F Hollow Shaft Encoder - Ø 32 mm Hollow Bore: Ø 6 mm to Ø 3/8 inch Resolution up to 5000 ppr IP 65 (IP 50 for IDC connector option) Electrical Specifications Code: Resolution:
More informationMaterial: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:
Automation / Mini Type SCH32F Hollow Shaft Encoder - Ø 32 mm Hollow Bore: Ø 6 mm to Ø 3/8 inch Resolution up to 5000 ppr IP 65 (IP 50 for IDC connector option) Electrical Specifications Code: Resolution:
More informationU-shaped Micro Photoelectric Sensor
SERIES U-shaped Micro Photoelectric Extremely small size enables space saving and quick installation! Extremely small Ultra-small type PM- 24(-R) contributes to the miniaturization of your equipment. Even
More informationSENSORS. Fiber Optic Sensors - S70. Advanced fiber optic amplifiers for high speed and low contrast applications
Fiber Optic Sensors - S7 Advanced fiber optic amplifiers for high speed and low contrast applications DIN rail mountable models with dual digital displays speed models: 2 μs...5 ms Super high speed models:
More informationSensing method Appearance a Connection o method Sensing distance Model NPN output PNP output Through-beam Pre-wired (see note 3) Connector.
Photoelectric Sensor with Built-in Amplifier Photoelectric Sensor with built-in amplifier is applicable to a wide variety of lines and ensures a longer sensing distance than any other model. User-friendly
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
More informationCylindrical Proximity Sensor
Cylindrical Proximity Sensor A New Series of Easy-to-use and Tough Models with a Yellow Indicator New series of TL-X2C1-GE models with improved performance over the previous TL-X-E models. Also, in addition
More informationTechnical data. General specifications. Signal voltage 15... 30 V DC Signal duration. 1 s Input 2. Signal voltage. 1 s Analog output.
Model Number Features Very small housing High climatic resistance 4 Bit multiturn Analog output Surge and reverse polarity protection Description This absolute rotary encoder with internal magnetic sampling
More informationYour Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592. * see variants. Applications.
Safety Technique SAFEMASTER Emergency Stop Module BG 5924, IP 5924 Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592 BG 5924 IP 5924 Product Description
More informationInductive slot sensor
0102 Model Number Features 3.5 mm slot width Usable up to SIL 3 acc. to IEC 61508 Extended temperature range Application Danger! In safety-related applications the sensor must be operated with a qualified
More informationSmall U-shaped Micro Photoelectric Sensor. Enables space saving and quick installation!
4 Small Micro Photoelectric Amplifier Built-in PM-44 SERIES PM-4 SERIES General terms and conditions... F- selection guide... P.44~ Related Information Glossary of terms / General precautions... P.39~
More informationphotoelectric highlights www.automation.datalogic.com
photoelectric miniature sensors S8 series The new S8 series of compact sensors offers excellent detection performances, usually associated with sensors that have larger dimensions and a higher price. The
More informationProduct data sheet. JUMO MIDAS Pressure Transmitter. Sales No. Order code JUMO AS 40.1001 401001/000-459-405-502-20-601-61
Produktdatenblatt - JUMO MIDAS Pressure Transmitter JUMO AS Street address: Solheimveien 50, 1470 Lørenskog, Norway Phone: +47 67 97 37 10 Delivery address: Solheimveien 50, 1470 Lørenskog, Norway Fax:
More informationElectronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact The CT-AHD.12 is an electronic time relay with OFF-delay. It is from the CT-D range. With their MDRC profile and a width of only
More informationABB i-bus KNX Fan Coil Actuator, MDRC FCA/S 1.1M, 2CDG 110 084 R0011
, 2CDG 110 084 R0011 2CDC 071 112 F0008 The Fan Coil Actuator is a modular installation device (MDRC) in pro M design. It is intended for installation in the distribution board on 35 mm mounting rails.
More informationProximity sensors SIES-8M, inductive for T-slot
Peripherals overview and type codes Peripherals overview Mounting attachments and accessories 1 Connecting cable NEBU-M8 3 2 Gripper with T-slot e.g. parallel gripper DHPS 3 Electric axis EGC Page/Internet
More information