DW8505 Low Power LED Driver

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "DW8505 Low Power LED Driver"

Transcription

1 Descriptions The is an instant On/Off LED driver for high power LED applications. At output stage, one regulated current port is designed to provide a uniform and constant current sink for driving LEDs within a large range of V F variations. easily provides users a consistent current source. User may adjust the output current from up to 100mA through an external resistor,r S, which gives users flexibility in controlling the light intensity of LEDs. In addition, users can precisely adjust LED brightness from 0% to 100% via output enable (EN) with Pulse Width Modulation. also guarantees that LEDs can be cascaded to maximum Ordering Information Device Marking Package Operating Temp E05 TSV -35 O C ~ +85 O C Features Package Information Constant output current invariant to supply and load voltage change 5V to 40V supply voltage Up to 100mA adjustable regulated output current Built-in thermal derating circuit Available PWM dimming control Output current adjusted through an external resistor TSV Package Package TSV-5L Size 2.9 x 2.8 x 1(mm) Applications LED light bulbs Signage and decorative LED lighting General lighting of flat panel displays RGB backlighting LED driver Current stabilizer with DC/DC or AC/DC Automotive lighting General purpose constant current source Typical Application Circuit - 1 -

2 Pin Connection OUT VDD EN GND Rs Pin Description Pin Name 1 EN Description Output stage enable control pin. High enable the OUT pin. Dimming control is possible by PWM (Pulse width modulation). Typically, It operates under 30kHz. 2 GND Ground 3 RS Output current set input. Connect a resistor from RS to GND to set the LED bias current 4 VDD Supply voltage input 5 OUT Output pin. Sink current is decided by the current on R SET connected to RS - 2 -

3 Absolute Maximum Ratings Characteristics Symbol Value Unit Supply voltage V DD 41 V Output voltage V OUT 23 V Enable voltage V EN 41 V Reference voltage VRS 5 V Package thermal resistance θ JA 220 /W Operating temperature T OPR -35~+85 Storage Temperature T STG -55~+150 Note 1. θja is measured in the convection at Ta=25 on a high effective thermal conductivity test board(4 Layers, 2S2P) of JEDEC 51-7 thermal measurement standard. Recommended Operation Conditions Characteristics Symbol Min. Typ. Max. Unit Supply voltage V DD 5-40 V Enable voltage V EN V Output sink current I OUT ma - 3 -

4 Electrical Characteristics V DD = 24V, EN= 0~24V, Ta = -35 ~+85, unless otherwise specified. Typical values are at T A =+25 Characteristics Symbol Conditions Min. Typ. Max. Unit Input supply voltage V DD 5-40 V Output linearity voltage V OUT_LINE V DD =24V, I SET = 60mA, V Output current I OUT ma Quiescent Current I Q_ON EN = 24V ma I Q_OFF EN = 0V ua EN input leakage current I EN_LIK ua Input high voltage V IH V Input low voltage V IL V LED output drop-out voltage V DROP V DD =24V, I SET =60mA mv Thermal derating T D Thermal derating hysteresis T DHYS Rset Voltage V SET V 30.5KΩ ma Output current by Rset R SET 10.1KΩ ma 6.1KΩ ma Note2 : Output dropout voltage : 90% x I OUT - 4 -

5 Block Diagram Application notice Setting Output Current Iout [ma] = (610[mV]/Rset[ohm])X 1000 an external resistor, R S. The output current can be calculated Rset(kΩ) Iout(mA) Power sequence There is an electrostatic diode between VDD and EN. When dimming control, It must input EN signal after inputs VDD. (t -1ms) EXT If not use Dimming control, EN connect to VDD. EXT )X1000 within ±5% chip skew where R EXT is the - 5 -

6 Electrical Characteristics Curves V DD = 12V, V OUT =2V, Ta = -35 ~+85, unless otherwise specified. Typical values are at T A =+25 Quiescent vs. VDD Ishutdown vs. VDD Vrs[mV] Iout[mA] Temperature[ ] Rset[ kω ] Vreference vs. Temp. IOUT vs. Rset - 6 -

7 Electrical Characteristics Curves V DD = 12V, V OUT =2V, Ta = -35 ~+85, unless otherwise specified. Typical values are at T A =+25 Iout[mA] Temperature[ ] Iout[mA] Temperature[ ] IOUT vs. Temp IOUT vs. Temp PWM PWM VOUT VOUT 1us IOUT IOUT 175ns PWM Rising Time PWM Falling Time - 7 -

8 Typical Applications LED VF = 3.3V, IF = 20mA Figure 1. VDD=5V Figure 2. VDD=12V Figure 3. VDD=24V Figure 4. VDD=12V, 9 LED Figure 5. PWM Typical Application Figure 6. R VALLAST Application - 8 -

9 Package Dimension (TSV-5L 2.95 x 2.8 x 1) Foot Print - 9 -

DW8501 High Power LED Driver

DW8501 High Power LED Driver Descriptions The is an instant On/Off LED driver for high power LED applications. At output stage, one regulated current port is designed to provide a uniform and constant current sink for driving LEDs

More information

TYPICAL APPLICATION CIRCUIT. ORDER INFORMATION SOP-EP 8 pin A703EFT (Lead Free) A703EGT (Green)

TYPICAL APPLICATION CIRCUIT. ORDER INFORMATION SOP-EP 8 pin A703EFT (Lead Free) A703EGT (Green) www.addmtek.com 2 CHANNELS 150mA HIGH VOLTAGE ADJUSTABLE CURRENT REGULATOR DESCRIPTION A703 is a high voltage, adjustable constant current driver for LED applications. Two regulated current ports are designed

More information

Four Channel Constant Current LED Driver

Four Channel Constant Current LED Driver Four Channel Constant Current LED Driver SP7615 FEATURES Cost Effective LED driver Constant current output ideal for Driving LED strings Four Channel LED Driver provides matched LED current Current adjusted

More information

Preliminary Datasheet

Preliminary Datasheet Features Macroblock Preliminary Datasheet 1.2A Constant Output Current 93% Efficiency @ input voltage 13V, 350mA, 9~36V Input Voltage Range Hysteretic PFM Improves Efficiency at Light Loads Settable Output

More information

LED Drivers For Lighting

LED Drivers For Lighting LED Drivers For Lighting Dongwoon Anatech First Technology & Best Quality Product Line Up 구분 P/N Function PKG 비고 Linear DC/DC Buck DW8501 DW8502 DW8505A DW8506 DW8520 DW8522 DW8525 DW8527 TO-252 SOT-223

More information

1.5MHz, 900mA Synchronous Step-Down Converter

1.5MHz, 900mA Synchronous Step-Down Converter 1.5MHz, 900mA Synchronous Step-Down Converter FEATURES High Efficiency - Up to 95% Guaranteed 900mA Output Current 2.5V to 5.5V Input Voltage Range 1.5MHz Constant Frequency Operation No external Schottky

More information

Series AMLDL-Z Up to 1000mA LED Driver

Series AMLDL-Z Up to 1000mA LED Driver FEATURES: Click on Series name for product info on aimtec.com Series Up to ma LED Driver Models Single output Model Input Voltage (V) Step Down DC/DC LED driver Operating Temperature range 4ºC to 85ºC

More information

High Power LED Driver Series User s Guide

High Power LED Driver Series User s Guide High Power LED Driver Series User s Guide 2004-2010 Sure Electronics Inc. LE-LL15113-LE-LL14113_Ver1.0 Table of Contents Chapter 1. Overview...1 1.1 Overview... 1 1.2 Features... 2 1.3 Applications...

More information

CAT4109, CAV4109. 3-Channel Constant-Current RGB LED Driver with Individual PWM Dimming

CAT4109, CAV4109. 3-Channel Constant-Current RGB LED Driver with Individual PWM Dimming 3-Channel Constant-Current RGB LED Driver with Individual PWM Dimming Description The CAT419/CAV419 is a 3 channel constant current LED driver, requiring no inductor. LED channel currents up to 175 ma

More information

FAN5346 Series Boost LED Driver with PWM Dimming Interface

FAN5346 Series Boost LED Driver with PWM Dimming Interface FAN5346 Series Boost LED Driver with PWM Dimming Interface Features Asynchronous Boost Converter Drives LEDs in Series: FAN5346S20X: 20V Output FAN5346S30X: 30V Output 2.5V to 5.5V Input Voltage Range

More information

1.5A Very L.D.O Voltage Regulator LM29150/29151/29152

1.5A Very L.D.O Voltage Regulator LM29150/29151/29152 FEATURES High Current Capability 1.5A Low Dropout Voltage 350mV Low Ground Current Accurate 1% Guaranteed Initial Tolerance Extremely Fast Transient Response Reverse-Battery and "Load Dump" Protection

More information

28V, 2A Buck Constant Current Switching Regulator for White LED

28V, 2A Buck Constant Current Switching Regulator for White LED 28V, 2A Buck Constant Current Switching Regulator for White LED FP7102 General Description The FP7102 is a PWM control buck converter designed to provide a simple, high efficiency solution for driving

More information

LED level meter driver, 12-point, power scale, dot or bar display

LED level meter driver, 12-point, power scale, dot or bar display LED level meter driver, 12-point, power scale, dot or bar display The is a monolithic IC for LED power meter applications. The display level range is 9mVrms to 380mVrms (Typ.) divided into 12 points with

More information

NJW4841-T1. 1-channel Switching Gate Driver

NJW4841-T1. 1-channel Switching Gate Driver NJW8-T -channel Switching Gate Driver GENERAL DESCRIPTION The NJW8 is a High Speed Switching Gate Driver that is applicable A peak current. The NJW8 features are Withstand voltage of, recommended operating

More information

Preliminary WS Channel Constant Current LED Driver With Programmable PWM Outputs

Preliminary WS Channel Constant Current LED Driver With Programmable PWM Outputs Features Applications Supports both constant voltage and constant current drive mode LED decorative lighting Programmable constant LED drive current Indoor/Outdoor LED video or massage display Wide constant

More information

7 OUT1 8 OUT2 9 OUT3 10 OUT4 11 OUT5 12 OUT6 13 OUT7 14 OUT8 15 OUT9 16 OUT10 17 OUT11 18 OUT12 19 OUT13 20 OUT14 21 OUT15 22 OUT16 OUT17 23 OUT18

7 OUT1 8 OUT2 9 OUT3 10 OUT4 11 OUT5 12 OUT6 13 OUT7 14 OUT8 15 OUT9 16 OUT10 17 OUT11 18 OUT12 19 OUT13 20 OUT14 21 OUT15 22 OUT16 OUT17 23 OUT18 18 CHANNELS LED DRIVER GENERAL DESCRIPTION IS31FL3218 is comprised of 18 constant current channels each with independent PWM control, designed for driving LEDs. The output current of each channel can be

More information

MM74HC4046 CMOS Phase Lock Loop

MM74HC4046 CMOS Phase Lock Loop CMOS Phase Lock Loop General Description The MM74HC4046 is a low power phase lock loop utilizing advanced silicon-gate CMOS technology to obtain high frequency operation both in the phase comparator and

More information

GDM1602A SPECIFICATIONS OF LCD MODULE. Features. Outline dimension

GDM1602A SPECIFICATIONS OF LCD MODULE. Features. Outline dimension SPECIFICATIONS OF LCD MODULE Features 1. 5x8 dots 2. Built-in controller (S6A0069 or Equivalent) 3. Power supply: Type 5V 4. 1/16 duty cycle 5. LED backlight 6. N.V. option Outline dimension Absolute maximum

More information

JE-AN Electronics Co., Ltd.

JE-AN Electronics Co., Ltd. SPECIFICATION Passive Matrix LCD Module ( 6 Charaters x 2 Lines ) APPROVED BY Model No. JASCB624SYW6MLY AUG.. 2 JEAN Electronics Co., Ltd. CONTENTS. Featues 2. Mechanical Specification 3. Electrical Specification

More information

NCT3941S/S-A Nuvoton 4 Times Linear Fan Driver NCT3941S/S-A

NCT3941S/S-A Nuvoton 4 Times Linear Fan Driver NCT3941S/S-A Nuvoton 4 Times Linear Fan Driver NCT3941S/S-A -I- Revision A4 Table of Content- 1. GENERAL DESCRIPTION...1 2. FEATURES...1 3. APPLICATION...1 4. BLOCK DIAGRAM...2 5. PIN CONFIGURATION AND TYPICAL APPLICATION

More information

STLD40D. White LED power supply for large display backlight. Features. Applications. Description

STLD40D. White LED power supply for large display backlight. Features. Applications. Description White LED power supply for large display backlight Features Inductor switches boost controller PFM mode control High efficiency over wide range of input voltage from 3.0 V to 5.5 V Over voltage protection

More information

EMERGING DISPLAY CUSTOMER ACCEPTANCE SPECIFICATIONS 16290(LED TYPES) EXAMINED BY : FILE NO. CAS-10251 ISSUE : JUL.03,2001 TOTAL PAGE : 7

EMERGING DISPLAY CUSTOMER ACCEPTANCE SPECIFICATIONS 16290(LED TYPES) EXAMINED BY : FILE NO. CAS-10251 ISSUE : JUL.03,2001 TOTAL PAGE : 7 EXAMINED BY : FILE NO. CAS-10251 EMERGING DISPLAY ISSUE : JUL.03,2001 APPROVED BY: TECHNOLOGIES CORPORATION TOTAL PAGE : 7 VERSION : 1 CUSTOMER ACCEPTANCE SPECIFICATIONS MODEL NO. : 16290(LED TYPES) FOR

More information

NJM2611 SERVO MOTOR CONTROLLER

NJM2611 SERVO MOTOR CONTROLLER SERVO MOTOR CONTROLLER GENERAL The NJM2611 is an integrated circuit to be applied on servo motor of radio controlled operation. Wide range of operating voltage, and the NJM2611 has the feature of internal

More information

TA7291P,TA7291S,TA7291F

TA7291P,TA7291S,TA7291F BRIDGE DRIVER TOSHIBA BIPOLAR LINEAR INTEGRATED CIRCUIT SILICON MONOLITHIC TA7291P,TA7291S,TA7291F TA7291P/S/F The TA7291P / S / F are Bridge Driver with output voltage control. FEATURES 4 modes available

More information

Programmable Single-/Dual-/Triple- Tone Gong SAE 800

Programmable Single-/Dual-/Triple- Tone Gong SAE 800 Programmable Single-/Dual-/Triple- Tone Gong Preliminary Data SAE 800 Bipolar IC Features Supply voltage range 2.8 V to 18 V Few external components (no electrolytic capacitor) 1 tone, 2 tones, 3 tones

More information

EMERGING DISPLAY CUSTOMER ACCEPTANCE SPECIFICATIONS 16400(LED TYPES) EXAMINED BY : FILE NO. CAS-10068 ISSUE : JAN.19,2000 TOTAL PAGE : 7 APPROVED BY:

EMERGING DISPLAY CUSTOMER ACCEPTANCE SPECIFICATIONS 16400(LED TYPES) EXAMINED BY : FILE NO. CAS-10068 ISSUE : JAN.19,2000 TOTAL PAGE : 7 APPROVED BY: EXAMINED BY : FILE NO. CAS-10068 APPROVED BY: EMERGING DISPLAY TECHNOLOGIES CORPORATION ISSUE : JAN.19,2000 TOTAL PAGE : 7 VERSION : 3 CUSTOMER ACCEPTANCE SPECIFICATIONS MODEL NO. : 16400(LED TYPES) FOR

More information

CE8301 Series. Introduction. Features. Ordering Information. Applications SMALL PACKAGE PFM CONTROL STEP-UP DC/DC CONVERTER

CE8301 Series. Introduction. Features. Ordering Information. Applications SMALL PACKAGE PFM CONTROL STEP-UP DC/DC CONVERTER SMALL PACKAGE PFM CONTROL STEP-UP DC/DC CONVERTER Introduction The is a CMOS PFM-control step-up switching DC/DC converter that mainly consists of a reference voltage source, an oscillator, and a comparator.

More information

10 ma LED driver in SOT457

10 ma LED driver in SOT457 SOT457 in SOT457 Rev. 1 20 February 2014 Product data sheet 1. Product profile 1.1 General description LED driver consisting of resistor-equipped PNP transistor with two diodes on one chip in an SOT457

More information

EMERGING DISPLAY CUSTOMER ACCEPTANCE SPECIFICATIONS 20400 (LED TYPES) EXAMINED BY : FILE NO. CAS-10184 ISSUE : DEC.01,1999 TOTAL PAGE : 7 APPROVED BY:

EMERGING DISPLAY CUSTOMER ACCEPTANCE SPECIFICATIONS 20400 (LED TYPES) EXAMINED BY : FILE NO. CAS-10184 ISSUE : DEC.01,1999 TOTAL PAGE : 7 APPROVED BY: EXAMINED BY : FILE NO. CAS-10184 APPROVED BY: EMERGING DISPLAY TECHNOLOGIES CORPORATION ISSUE : DEC.01,1999 TOTAL PAGE : 7 VERSION : 2 CUSTOMER ACCEPTANCE SPECIFICATIONS MODEL NO. : 20400 (LED TYPES) FOR

More information

Supertex inc. HV264. Quad, High Voltage, Amplifier Array. Features. General Description. Applications. Block Diagram. Supertex inc.

Supertex inc. HV264. Quad, High Voltage, Amplifier Array. Features. General Description. Applications. Block Diagram. Supertex inc. Quad, High Voltage, Amplifier Array Features Four independent high voltage amplifiers 190V output swing 9.0V/µs typical output slew rate Fixed gain of 66.7V/V High value internal feedback resistors Very

More information

1A L.D.O VOLTAGE REGULATOR

1A L.D.O VOLTAGE REGULATOR FEATURES Output Current up to 1 A Low Dropout Voltage (1.2V at 1A Output current) Three Terminal Adjustable(ADJ) or Fixed 1.2V, 1.5V, 1.8V, 2.5V, 2.85V, 5.0V Line Regulation typically at 0.1% max. Load

More information

Specification. For. LCD Module CCM1620CSL

Specification. For. LCD Module CCM1620CSL Specification For LCD Module CCM1620CSL 1 FEATURES CASIL SEMICONDUCTOR CO., LTD. CCM1620CSL LCD MODULE Display Type: STN Display Format: 16 Characters x 2 Lines Input Data: 4-Bits or 8-Bits interface available

More information

AP1509. 150KHz, 2A PWM BUCK DC/DC CONVERTER. Description. Pin Assignments V IN. Applications. Features. (Top View) GND GND. Output AP1509 GND GND

AP1509. 150KHz, 2A PWM BUCK DC/DC CONVERTER. Description. Pin Assignments V IN. Applications. Features. (Top View) GND GND. Output AP1509 GND GND Description Pin Assignments The series are monolithic IC designed for a stepdown DC/DC converter, and own the ability of driving a 2A load without additional transistor. It saves board space. The external

More information

SP724. TVS Diode Arrays

SP724. TVS Diode Arrays The is a quad array of transient voltage clamping circuits designed to suppress ESD and other transient over-voltage events. The is used to help protect sensitive digital or analog input circuits on data,

More information

L4959 MULTIFUNCTION VOLTAGE REGULATOR FOR HOME AUDIO

L4959 MULTIFUNCTION VOLTAGE REGULATOR FOR HOME AUDIO L4959 MULTIFUNCTION VOLTAGE FOR HOME AUDIO 4 OUTPUTS: 12V (1.3A); 12V (0.8A); 8.6V (0.6A); 5.6V (0.25A) STANDBY OUT1 12V(a), OUT2 12V(b) AND OUT3 8.6V WITH INDEPENDENT ENABLE CONTROL FOR STAND-BY MODE

More information

TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TAR5SB15~TAR5SB50

TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TAR5SB15~TAR5SB50 TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TARSB~TARSB Point Regulators (Low-Dropout Regulator) TARSB~TARSB The TARSBxx Series is comprised of general-purpose bipolar single-power-supply

More information

5 V, 1 A H-Bridge Motor Driver

5 V, 1 A H-Bridge Motor Driver , A H-Bridge Motor Driver DESCRIPTION The SIP200 is an integrated, buffered H-bridge with TTL and CMOS compatible inputs with the capability of delivering up to A continuous current at DD supply. The SIP200

More information

CAT4101TV. 1 A Constant-Current LED Driver with PWM Dimming

CAT4101TV. 1 A Constant-Current LED Driver with PWM Dimming A Constant-Current LED Driver with PWM Dimming Description The CAT4 is a constant current sink driving a string of high brightness LEDs up to A with very low dropout of.5 V at full load. It requires no

More information

SLG7NT4129 PCIE RTD3. Pin Configuration. Features Low Power Consumption Dynamic Supply Voltage RoHS Compliant / Halogen-Free Pb-Free TDFN-12 Package

SLG7NT4129 PCIE RTD3. Pin Configuration. Features Low Power Consumption Dynamic Supply Voltage RoHS Compliant / Halogen-Free Pb-Free TDFN-12 Package General Description Silego SLG7NT4129 is a low power and small form device. The SoC is housed in a 2.5mm x 2.5mm TDFN package which is optimal for using with small devices. Features Low Power Consumption

More information

BATRON DOCUMENT NUMBER AND REVISION VL-FS-BTHQ 21605VSS-02 REV.A (BTHQ 21605VSS-FSTF-LED05W(1 DIE)) Feb/2002 BTHQ 21605-FSTF-LED WHITE 1/15

BATRON DOCUMENT NUMBER AND REVISION VL-FS-BTHQ 21605VSS-02 REV.A (BTHQ 21605VSS-FSTF-LED05W(1 DIE)) Feb/2002 BTHQ 21605-FSTF-LED WHITE 1/15 Feb/2002 1/15 DOCUMENT NUMBER AND REVISION VL-FS-BTHQ 21605VSS-02 REV.A (BTHQ 21605VSS-FSTF-LED05W(1 DIE)) 2/15 DOCUMENT REVISION HISTORY 1: DOCUMENT REVISION DATE DESCRIPTION CHANGED BY FROM TO A 2002.01.09

More information

EMERGING DISPLAY CUSTOMER ACCEPTANCE SPECIFICATIONS 32F50(LED TYPES) EXAMINED BY : FILE NO. CAS ISSUE : OCT.

EMERGING DISPLAY CUSTOMER ACCEPTANCE SPECIFICATIONS 32F50(LED TYPES) EXAMINED BY : FILE NO. CAS ISSUE : OCT. EXAMINED BY : FILE NO. CAS-10210 EMERGING DISPLAY ISSUE : OCT.23,2003 APPROVED BY : TECHNOLOGIES CORPORATION TOTAL PAGE : 10 VERSION : 2 CUSTOMER ACCEPTANCE SPECIFICATIONS MODEL NO. : 32F50(LED TYPES)

More information

LF00AB/C SERIES VERY LOW DROP VOLTAGE REGULATORS WITH INHIBIT

LF00AB/C SERIES VERY LOW DROP VOLTAGE REGULATORS WITH INHIBIT LF00AB/C SERIES ERY LOW DROP OLTAGE REGULATORS WITH INHIBIT ERY LOW DROPOUT OLTAGE (5) ERY LOW QUIESCENT CURRENT (TYP. 50 µa IN OFF MODE, 500µA INON MODE) OUTPUT CURRENT UP TO 500 ma LOGIC-CONTROLLED ELECTRONIC

More information

CAT4139. 22 V High Current Boost White LED Driver

CAT4139. 22 V High Current Boost White LED Driver 22 V High Current Boost White LED Driver Description The CAT4139 is a DC/DC step up converter that delivers an accurate constant current ideal for driving LEDs. Operation at a fixed switching frequency

More information

.OPERATING SUPPLY VOLTAGE UP TO 46 V

.OPERATING SUPPLY VOLTAGE UP TO 46 V L298 DUAL FULL-BRIDGE DRIVER.OPERATING SUPPLY VOLTAGE UP TO 46 V TOTAL DC CURRENT UP TO 4 A. LOW SATURATION VOLTAGE OVERTEMPERATURE PROTECTION LOGICAL "0" INPUT VOLTAGE UP TO 1.5 V (HIGH NOISE IMMUNITY)

More information

STLQ015. 150 ma, ultra low quiescent current linear voltage regulator. Description. Features. Application

STLQ015. 150 ma, ultra low quiescent current linear voltage regulator. Description. Features. Application 150 ma, ultra low quiescent current linear voltage regulator Description Datasheet - production data Features SOT23-5L Input voltage from 1.5 to 5.5 V Very low quiescent current: 1.0 µa (typ.) at no load

More information

EMERGING DISPLAY CUSTOMER ACCEPTANCE SPECIFICATIONS E W 3 2 F 9 0 F L W EXAMINED BY : FILE NO. CAS ISSUE : AUG.03,2000 TOTAL PAGE : 10

EMERGING DISPLAY CUSTOMER ACCEPTANCE SPECIFICATIONS E W 3 2 F 9 0 F L W EXAMINED BY : FILE NO. CAS ISSUE : AUG.03,2000 TOTAL PAGE : 10 EXAMINED BY : FILE NO. CAS-50197 APPROVED BY: EMERGING DISPLAY TECHNOLOGIES CORPORATION ISSUE : AUG.03,2000 TOTAL PAGE : 10 VERSION : 4 CUSTOMER ACCEPTANCE SPECIFICATIONS MODEL NO. : E W 3 2 F 9 0 F L

More information

LDS8720. 184 WLED Matrix Driver with Boost Converter FEATURES APPLICATION DESCRIPTION TYPICAL APPLICATION CIRCUIT

LDS8720. 184 WLED Matrix Driver with Boost Converter FEATURES APPLICATION DESCRIPTION TYPICAL APPLICATION CIRCUIT 184 WLED Matrix Driver with Boost Converter FEATURES High efficiency boost converter with the input voltage range from 2.7 to 5.5 V No external Schottky Required (Internal synchronous rectifier) 250 mv

More information

Features DNC DNC GND GND GND GND GATE GATE. Product Marking Reel Size (inches) Tape Width (mm) Quantity per Reel ZXGD3108N8TC ZXGD ,500

Features DNC DNC GND GND GND GND GATE GATE. Product Marking Reel Size (inches) Tape Width (mm) Quantity per Reel ZXGD3108N8TC ZXGD ,500 V ACTIVE OR'ING MOSFET CONTROLLER IN SO8 Description is a V Active OR ing MOSFET Controller designed for driving a very low R DS(ON) Power MOSFET as an ideal diode. This replaces the standard rectifier

More information

NTE2053 Integrated Circuit 8 Bit MPU Compatible A/D Converter

NTE2053 Integrated Circuit 8 Bit MPU Compatible A/D Converter NTE2053 Integrated Circuit 8 Bit MPU Compatible A/D Converter Description: The NTE2053 is a CMOS 8 bit successive approximation Analog to Digital converter in a 20 Lead DIP type package which uses a differential

More information

1.5A Ultra Low Dropout Linear Regulator TJ3965

1.5A Ultra Low Dropout Linear Regulator TJ3965 FEATURES Ultra Low Dropout Voltage Low Ground Pin Current Excellent Line and Load Regulation Guaranteed Output Current of 1.5A Available in MSOP8, SOP8, SOP8PP, SOT223, TO252, TO263, TO220, and SOT89 Packages

More information

S-8130AA Series TEMPERATURE SWITCH IC WITH LATCH

S-8130AA Series TEMPERATURE SWITCH IC WITH LATCH www.sii-ic.com TEMPERATURE SWITCH IC WITH LATCH Seiko Instruments Inc., 2001-2010 Rev.3.0_00 The S-8130AA is a temperature switch with a latch function having a built-in semiconductor temperature sensor

More information

Preliminary Datasheet

Preliminary Datasheet Features Macroblock Preliminary Datasheet Backward compatible with MBI5026 in package 16 constant-current output channels 12-bit color depth PWM control Scrambled-PWM technology to improve refresh rate

More information

Description. Applications

Description. Applications 1.6X0.8mm SMD CHIP LED LAMP Part Number: APT1608SEC/J4-AMT Super Bright Orange Features High reliability LED package. 1.6mmx0.8mm SMD LED,0.75mm thickness Low power consumption. Wide viewing angle. Ideal

More information

CAT W Quad Channel DC/DC LED Driver with Diagnostics

CAT W Quad Channel DC/DC LED Driver with Diagnostics 6 W Quad Channel DC/DC LED Driver with Diagnostics Description The CAT46 is an integrated multi channel LED driver and high power DC/DC converter suitable for powering backlighting applications up to a

More information

MM74HC14 Hex Inverting Schmitt Trigger

MM74HC14 Hex Inverting Schmitt Trigger MM74HC14 Hex Inverting Schmitt Trigger General Description The MM74HC14 utilizes advanced silicon-gate CMOS technology to achieve the low power dissipation and high noise immunity of standard CMOS, as

More information

SG6520 FEATURES DESCRIPTION TYPICAL APPLICATION. Product Specification. PC Power Supply Supervisors

SG6520 FEATURES DESCRIPTION TYPICAL APPLICATION. Product Specification. PC Power Supply Supervisors FEATURES Two 12V sense input pins: VS12 and VS12B Over voltage protection (OVP) for 3.3V, 5V and two 12V Over current protection (OCP) for 3.3V, 5V and two 12V Under voltage protection (UVP) for 3.3V,

More information

NJU6061. Full Color LED Controller Driver with PWM Control GENERAL DESCRIPTION PACKAGE OUTLINE FEATURES

NJU6061. Full Color LED Controller Driver with PWM Control GENERAL DESCRIPTION PACKAGE OUTLINE FEATURES Full Color LED Controller Driver with PWM Control GENERAL DESCRIPTION The NJU6061 is a full color LED controller driver. It can control and drive a 3 in 1 packaged (Red, Green and Blue) LED. The NJU6061

More information

-SFYLYHTC06 FOR MESSRS. :

-SFYLYHTC06 FOR MESSRS. : T h e L C D ( M ) S p e c i a l i s t CONTACT ADDRESS : 6F, Block 105, Jing Di Industrial Park, Fu Qiang Rd. Fu Tian, Shenzhen City,China. Tel: 0086-755-83308729 Fax: 0086-755-83308659 E-mail: craig.jiang@wincomlcd.com

More information

400KHz 60V 4A Switching Current Boost / Buck-Boost / Inverting DC/DC Converter

400KHz 60V 4A Switching Current Boost / Buck-Boost / Inverting DC/DC Converter Features Wide 5V to 32V Input Voltage Range Positive or Negative Output Voltage Programming with a Single Feedback Pin Current Mode Control Provides Excellent Transient Response 1.25V reference adjustable

More information

CAT4026. 6-Channel LED Controller with Fault Diagnostics for Large Panel LED Backlighting

CAT4026. 6-Channel LED Controller with Fault Diagnostics for Large Panel LED Backlighting 6-Channel LED Controller with Fault Diagnostics for Large Panel LED Backlighting Description The CAT426 is a high performance, large panel LED controller designed to control six constant current high voltage

More information

3-Channel Supervisor IC for Power Supply

3-Channel Supervisor IC for Power Supply 3-Channel Supervisor IC for Power Supply Features Over-voltage protection and lockout Under-voltage protection and lockout Open drain power good output signal Built-in 300mS delay for power good 38mS de-bounce

More information

INTEGRATED CIRCUITS. 74LVC08A Quad 2-input AND gate. Product specification IC24 Data Handbook. 1997 Jun 30

INTEGRATED CIRCUITS. 74LVC08A Quad 2-input AND gate. Product specification IC24 Data Handbook. 1997 Jun 30 INTEGRATED CIRCUITS IC24 Data Handbook 1997 Jun 30 FEATURES Wide supply voltage range of 1.2 V to 3.6 V In accordance with JEDEC standard no. 8-1A Inputs accept voltages up to 5.5 V CMOS low power consumption

More information

23-26GHz Reflective SP4T Switch. GaAs Monolithic Microwave IC in SMD leadless package

23-26GHz Reflective SP4T Switch. GaAs Monolithic Microwave IC in SMD leadless package CHS2411-QDG Description GaAs Monolithic Microwave IC in SMD leadless package The CHS2411-QDG (CHS2412-QDG, see Note) is a monolithic reflective SP4T switch in K-Band. Positive supply voltage only is required.

More information

STCS1. 1.5 A max constant current LED driver. Features. Applications. Description

STCS1. 1.5 A max constant current LED driver. Features. Applications. Description 1.5 A max constant current LED driver Features Up to 40 V input voltage Less than 0.5 V voltage overhead Up to 1.5 A output current PWM dimming pin Shutdown pin LED disconnection diagnostic DFN8 (3x3 mm)

More information

HCF4081B QUAD 2 INPUT AND GATE

HCF4081B QUAD 2 INPUT AND GATE QUAD 2 INPUT AND GATE MEDIUM SPEED OPERATION : t PD = 60ns (Typ.) at 10 QUIESCENT CURRENT SPECIFIED UP TO 20 5, 10 AND 15 PARAMETRIC RATINGS INPUT LEAKAGE CURRENT I I = 100nA (MAX) AT DD = 18 T A = 25

More information

3½ DIGIT VOLTMETER MODULE LED- / LCD- SERIES

3½ DIGIT VOLTMETER MODULE LED- / LCD- SERIES 12.02 EA 4035-SERIES 3½ DIGIT VOLTMETER MODULE LED- / LCD- SERIES Splashproof 35,1x22,4 mm FEATURES * IP65 * 2 LED AND 2 LCD TYPES * EASY TO USE OR COMPATIBLE TO DATEL * ±200mV D.C. FULL SCALE READING

More information

BATRON. Specification for BTHQ 21605V-FSTF-I2C-COG

BATRON. Specification for BTHQ 21605V-FSTF-I2C-COG BATRON Specification for BTHQ 21605V-FSTF-I2C-COG Version October 2003 PAGE 2 OF 12 DOCUMENT REVISION HISTORY 1: DOCUMENT REVISION FROM TO DATE DESCRIPTION CHANGED BY CHECKED BY A 2003.10.16 First release.

More information

AH9485/86. Description. Pin Assignments NEW PRODUCT. Applications. Features SINGLE PHASE LOW NOISE SMART MOTOR DRIVER AH9485/86 V DD FG/RD GND PWM

AH9485/86. Description. Pin Assignments NEW PRODUCT. Applications. Features SINGLE PHASE LOW NOISE SMART MOTOR DRIVER AH9485/86 V DD FG/RD GND PWM SINGLE PHASE LOW NOISE SMART MOTOR DRIVER Description Pin Assignments The AH9485 and AH9486 are single chip solutions for driving a single phase (coil) brushless DC motors. It integrates the motor driver

More information

HCF4056B BCD TO 7 SEGMENT DECODER /DRIVER WITH STROBED LATCH FUNCTION

HCF4056B BCD TO 7 SEGMENT DECODER /DRIVER WITH STROBED LATCH FUNCTION BCD TO 7 SEGMENT DECODER /DRIVER WITH STROBED LATCH FUNCTION QUIESCENT CURRENT SPECIF. UP TO 20V OPERATION OF LIQUID CRYSTALS WITH CMOS CIRCUITS PROVIDES ULTRA LOW POWER DISPLAY. EQUIVALENT AC OUTPUT DRIVE

More information

PB137 POSITIVE VOLTAGE REGULATOR FOR BATTERY CHARGER

PB137 POSITIVE VOLTAGE REGULATOR FOR BATTERY CHARGER POSITIVE VOLTAGE REGULATOR FOR BATTERY CHARGER REVERSE LEAKAGE CURRENT LESS THAN 10 µa THREE TERMINAL FIXED VERSION (13.7V) OUTPUT CURRENT IN EXCESS OF 1.5A AVAILABLE IN ± 1% (AC) SELECTION AT 25 C TYPICAL

More information

AZ DISPLAYS, INC. LCD MODULE SPECIFICATION MODULE TYPE : AGM1616A

AZ DISPLAYS, INC. LCD MODULE SPECIFICATION MODULE TYPE : AGM1616A AZ DISPLAYS, INC. LCD MODULE SPECIFICATION MODULE TYPE : AGM1616A SPECIFICATION FOR LIQUID CRYSTAL DISPLAY MODULE View Direction 6 O clock 12 O clock LCD Type FSTN Positive STN Gray FSTN Negative STN Yellow

More information

STCS1A. 1.5 A max constant current LED driver. Features. Applications. Description

STCS1A. 1.5 A max constant current LED driver. Features. Applications. Description 1.5 A max constant current LED driver Features Up to 40 V input voltage Less than 0.5 V voltage overhead Up to 1.5 A output current PWM dimming pin Shutdown pin LED disconnection diagnostic DFN8 (3 x 3

More information

UTC UNISONIC TECHNOLOGIES CO. LTD 1 LINEAR INTEGRATED CIRCUIT 7CH DARLINGTON SINK DRIVER

UTC UNISONIC TECHNOLOGIES CO. LTD 1 LINEAR INTEGRATED CIRCUIT 7CH DARLINGTON SINK DRIVER kω UTC ULN 7CH DARLINGTON SINK DRIVER DESCRIPTION The UTC ULN is high-voltage, high-current darlington drivers comprised of seven NPN darlingto pairs. All units feature integral clamp diodes for switching

More information

LM4040 PRECISION MICROPOWER SHUNT VOLTAGE REFERENCES

LM4040 PRECISION MICROPOWER SHUNT VOLTAGE REFERENCES Description The is a family of bandgap circuits designed to achieve precision micro-power voltage references of.5v, 3.V and 5.V. The devices are available in.% B-grade,.5% C-grade and % D-grade initial

More information

FOR MESSRS. : WC1602A PAGE: 1/12 CONTENTS

FOR MESSRS. : WC1602A PAGE: 1/12 CONTENTS T h e L C D ( M ) S p e c i a l i s t CONTACT ADDRESS : 6F, Block 105, Jin Di Industrial Park, Fu Qiang Rd. Fu Tian, Shenzhen City,China. Tel: 0086-755-83308729 Fax: 0086-755-83308659 E-mail: craig.jiang@wincomlcd.com

More information

Supertex inc. MD1820. High Speed, Four Channel MOSFET Driver with Non-Inverting Outputs. Features

Supertex inc. MD1820. High Speed, Four Channel MOSFET Driver with Non-Inverting Outputs. Features inc. High Speed, Four Channel MOSFET Driver with Non-Inverting Outputs Features Non-inverting, four channel MOSFET driver.0ns rise and fall time 2.0A peak output source/sink current 1. to 5.0V input CMOS

More information

TS34119 Low Power Audio Amplifier

TS34119 Low Power Audio Amplifier SOP-8 DIP-8 Pin assignment: 1. CD 8. VO2 2. FC2 7. Gnd 3. FC1 6. Vcc 4. Vin 5. VO1 General Description The TS34119 is a low power audio amplifier, it integrated circuit intended (primarily) for telephone

More information

HCF4070B QUAD EXCLUSIVE OR GATE

HCF4070B QUAD EXCLUSIVE OR GATE QUAD EXCLUSIE OR GATE MEDIUM-SPEED OPERATION t PHL = t PLH = 70ns (Typ.) at CL = 50 pf and DD = 10 QUIESCENT CURRENT SPECIFIED UP TO 20 5, 10 AND 15 PARAMETRIC RATINGS INPUT LEAKAGE CURRENT I I = 100nA

More information

PI3USB102. USB 2.0 High-Speed (480 Mbps) Signal Switch Targeted for Battery Powered Applications. Features. Description. Application.

PI3USB102. USB 2.0 High-Speed (480 Mbps) Signal Switch Targeted for Battery Powered Applications. Features. Description. Application. Features USB 2.0 compliant (high speed and full speed) R ON is 4.0Ω typical @ V DD = 3.0V Low bit-to-bit skew Low Crosstalk: 33dB @ 480 Mbps Off Isolation: 40dB @ 480 Mbps Near-Zero propagation delay:

More information

TSM2N7002K 60V N-Channel MOSFET

TSM2N7002K 60V N-Channel MOSFET SOT-23 SOT-323 Pin Definition: 1. Gate 2. Source 3. Drain PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (ma) 5 @ V GS = 10V 100 60 5.5 @ V GS = 5V 100 Features Low On-Resistance ESD Protection High Speed Switching

More information

LC898300XA. Functions Automatic adjustment to the individual resonance frequency Automatic brake function Initial drive frequency adjustment function

LC898300XA. Functions Automatic adjustment to the individual resonance frequency Automatic brake function Initial drive frequency adjustment function Ordering number : A2053 CMOS LSI Linear Vibrator Driver IC http://onsemi.com Overview is a Linear Vibrator Driver IC for a haptics and a vibrator installed in mobile equipments. The best feature is it

More information

28 V, 56 m, Load Switch with Programmable Current Limit and Slew Rate Control

28 V, 56 m, Load Switch with Programmable Current Limit and Slew Rate Control 28 V, 56 m, Load Switch with Programmable Current Limit and Slew Rate Control OPERATION DESCRIPTION SiP32419 and SiP32429 are load switches that integrate multiple control features that simplify the design

More information

LD7550-B. Green-Mode PWM Controller. General Description. Features. Applications. Typical Application. REV: 01a 12/22/2006 LD7550-B

LD7550-B. Green-Mode PWM Controller. General Description. Features. Applications. Typical Application. REV: 01a 12/22/2006 LD7550-B 12/22/2006 REV: 01a Green-Mode PWM Controller General Description The LD7550-B is a low cost, low startup current, current mode PWM controller with green-mode power-saving operation. The integrated functions

More information

NHD 0220JZ FSB GBW. Character Liquid Crystal Display Module

NHD 0220JZ FSB GBW. Character Liquid Crystal Display Module NHD 0220JZ FSB GBW Character Liquid Crystal Display Module NHD Newhaven Display 0220 2 lines x 20 characters JZ Model F Transflective SB Side Blue LED Backlight G STN Gray B 6:00 view W Wide Temp. ( 20

More information

LCD MODULE DEM 16217 SYH-LY

LCD MODULE DEM 16217 SYH-LY Display Elektronik GmbH LCD MODULE DEM 16217 SYH-LY Product specification Version : 5 14.04.2003 GENERAL SPECIFICATION MODULE NO. : DEM 16217 SYH-LY CUSTOMER P/N VERSION NO. CHANGE DESCRIPTION DATE 0 ORIGINAL

More information

CD4027BMS. CMOS Dual J-K Master-Slave Flip-Flop. Pinout. Features. Functional Diagram. Applications. Description. December 1992

CD4027BMS. CMOS Dual J-K Master-Slave Flip-Flop. Pinout. Features. Functional Diagram. Applications. Description. December 1992 CD7BMS December 199 CMOS Dual J-K Master-Slave Flip-Flop Features Pinout High Voltage Type (V Rating) Set - Reset Capability CD7BMS TOP VIEW Static Flip-Flop Operation - Retains State Indefinitely with

More information

LCM Design Engineering SPECIFICATION FOR LCD MODULE TYPE ITEM NO.: MDLS16265-04 MDLS16265-LV-G-LED04G (BB) (DOC. REVISION 1.0)

LCM Design Engineering SPECIFICATION FOR LCD MODULE TYPE ITEM NO.: MDLS16265-04 MDLS16265-LV-G-LED04G (BB) (DOC. REVISION 1.0) VARITRONIX LIMITED LCM Design Engineering SPECIFICATION FOR LCD MODULE TYPE ITEM NO.: MDLS16265-04 MDLS16265-LV-G-LED04G (BB) (DOC. REVISION 1.0) DEPARTMENT NAME SIGNATURE EFFECTIVE DATE PREPARED BY PHILIP

More information

SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY

SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY PART NUMBER: MGD1602B DATE: MAR. 17,2004 1.0 MECHANICAL SPECS 1. Overall Module Size 84.0mm(W) x 44.0mm(H) x max 13.5mm(D) for LED backlight version 84.0mm(W)

More information

STCS2A. 2 A max constant current LED driver. Features. Applications. Description

STCS2A. 2 A max constant current LED driver. Features. Applications. Description 2 A max constant current LED driver Features Up to 40 V input voltage Less than 0.5 V voltage overhead Up to 2 A output current PWM dimming pin Shutdown pin LED disconnection diagnostic Slope control with

More information

DATA SHEET. TDA1510AQ 24 W BTL or 2 x 12 W stereo car radio power amplifier INTEGRATED CIRCUITS

DATA SHEET. TDA1510AQ 24 W BTL or 2 x 12 W stereo car radio power amplifier INTEGRATED CIRCUITS INTEGRATED CIRCUITS DATA SHEET 24 W BTL or 2 x 12 W stereo car radio File under Integrated Circuits, IC01 January 1992 GENERAL DESCRIPTION The is a class-b integrated output amplifier encapsulated in a

More information

VN05N. High side smart power solid state relay PENTAWATT. Features. Description

VN05N. High side smart power solid state relay PENTAWATT. Features. Description High side smart power solid state relay Features Type V DSS R DS(on) I OUT V CC VN05N 60 V 0.18 Ω 13 A 26 V Output current (continuous): 13A @ Tc=25 C 5V logic level compatible input Thermal shutdown Under

More information

NHD 0116GZ FSB GBW. Character Liquid Crystal Display Module

NHD 0116GZ FSB GBW. Character Liquid Crystal Display Module NHD 0116GZ FSB GBW Character Liquid Crystal Display Module NHD Newhaven Display 0116 1 line x 16 characters GZ Model F Transflective SB Side Blue LED Backlight G STN Gray B 6:00 view W Wide Temperature

More information

Cold-Junction-Compensated K-Thermocoupleto-Digital Converter (0 C to +1024 C)

Cold-Junction-Compensated K-Thermocoupleto-Digital Converter (0 C to +1024 C) 19-2235; Rev 1; 3/02 Cold-Junction-Compensated K-Thermocoupleto-Digital General Description The performs cold-junction compensation and digitizes the signal from a type-k thermocouple. The data is output

More information

Description. Table 1. Device summary SOT-223 DPAK TO-220

Description. Table 1. Device summary SOT-223 DPAK TO-220 Low drop fixed and adjustable positive voltage regulators Datasheet - production data SOT-223 Available in ± 2% (at 25 C) and 4% in full temperature range High supply voltage rejection: 80 db typ. (at

More information

LM1084 5A Low Dropout Positive Regulators

LM1084 5A Low Dropout Positive Regulators 5A Low Dropout Positive Regulators General Description The LM1084 is a series of low dropout voltage positive regulators with a maximum dropout of 1.5 at 5A of load current. It has the same pin-out as

More information

MC34063A MC34063E DC-DC CONVERTER CONTROL CIRCUITS

MC34063A MC34063E DC-DC CONVERTER CONTROL CIRCUITS MC34063A MC34063E DC-DC CONVERTER CONTROL CIRCUITS OUTPUT SWITCH CURRENT IN EXCESS OF 1.5A 2% REFERENCE ACCURACY LOW QUIESCENT CURRENT: 2.5mA (TYP.) OPERATING FROM 3V TO 40V FREQUENCY OPERATION TO 100KHz

More information

Pulse Width Modulation Amplifiers -PWM/RAMP ILIM/SHDN CURRENT LIMIT PWM. 100pF 28K OUTPUT DRIVERS OSC SHUTDOWN CONTROL

Pulse Width Modulation Amplifiers -PWM/RAMP ILIM/SHDN CURRENT LIMIT PWM. 100pF 28K OUTPUT DRIVERS OSC SHUTDOWN CONTROL Pulse Width Modulation Amplifiers SA SA FEATURE HIGH FREQUENCY SWITCHING khz WIDE SUPPLY RANGE -V A CONTINUOUS TO C CASE PROTECTION CIRCUITS ANALOG OR DIGITAL INPUTS SYNCHRONIZED OR EXTERNAL OSCILLATOR

More information

SK Product Overview. Main Application Field: Technical Data Sheet

SK Product Overview. Main Application Field: Technical Data Sheet Product Overview is a set of smart control circuit and a light emitting circuit in one of the controlled LED source. The outer type is the same with a 5050LED chip, each element is a pixel. Pixels contained

More information

480mA White LED 1x/1.5x/2x Charge Pump for Backlighting and Camera Flash

480mA White LED 1x/1.5x/2x Charge Pump for Backlighting and Camera Flash 19-3326; Rev 1; 8/05 EVALUATION KIT AVAILABLE 480mA White LED 1x/1.5x/2x Charge Pump for General Description The charge pump drives up to 8 white LEDs with regulated constant current for uniform intensity.

More information

650W Single Output Power Supply

650W Single Output Power Supply AK-650 series Features : Universal AC input with active PFC Programmable output Voltage ( 0% ~ 05% ) Programmable output Current ( % ~ 05% ) High efficiency up to 9% + / 0.5A auxiliary output Intelligent

More information