Car Radio USB. Casablanca Operating instructions

Transcription

1 Car Radio USB Casablanca Operating instructions

2 Controls Left loudspeaker 2 SRC button Select waveband or audio source 3 Display 4 / button In the menu: Change menu level Radio mode: Adjust stations, store stations/ select a stored station (memory location level) USB mode: Select track and folder 5 button Short press: Call up/close menu Long press: Call up memory location level in radio mode, call up folder mode in USB mode 6 Right loudspeaker 7 AUX-IN socket 8 On/Off button Short press: Switch on car sound system In operation: Mute car sound system (Mute) Long press: Switch off car sound system 9 Volume control In the menu: Select menu item, change settings : USB port 2

3 Contents Safety notes... 4 Symbols used... 4 Road safety... 4 Use as directed... 4 Declaration of conformity... 4 Cleaning notes... 4 Disposal notes... 4 Scope of delivery... 4 General operation... 5 Switching on/off... 5 Volume... 5 Overview of the menu operation... 5 Changing the presetting of the power-on volume... 5 Selecting equalizer presettings... 6 Switching the confirmation beep on/off... 6 Radio mode... 6 Setting the reception area... 6 RDS... 6 Traffic information... 7 Changing to radio mode or selecting a waveband... 7 Tuning into a station... 8 Storing stations... 8 Calling up a stored station... 8 USB mode... 8 Basic information... 8 Connecting/removing a USB data carrier... 9 Changing to USB mode... 9 Selecting tracks... 9 Selecting folders... 9 Fast searching... 9 Playback options... 9 External audio sources AUX-IN socket...10 Factory settings Useful information Warranty...10 Service...10 Technical data Connection assignment

4 Safety notes Cleaning notes Disposal notes Scope of delivery Safety notes The car sound system was manufactured according to the state of the art and established safety guidelines. Even so, dangers may occur if you do not observe the safety notes in these instructions. Read these instructions carefully and completely before using the car sound system. Keep the instructions at a location so that they are always accessible to all users. Always pass on the car sound system to third parties together with these instructions. In addition, observe the instructions of the devices used in conjunction with this car sound system. Symbols used These instructions employ the following symbols: DANGER! Warns about injuries The CE mark confirms the compliance with EU directives. Identifies a sequencing step Identifies a listing Road safety Use your device in such a way that you can always safely control your vehicle. In case of doubt, stop at a suitable location and operate your device while the vehicle is standing. for installation in a vehicle without installed loudspeakers. Observe the output limits of the device. Repairs and installation, if necessary, should be performed by a specialist. Declaration of conformity The Blaupunkt Europe GmbH declares that the car sound system Casablanca 2012 complies with the basic requirements and the other relevant regulations of the directive 2004/108/EC. The declaration of conformity can be found on the Internet under Cleaning notes Solvents, cleaning and scouring agents as well as dashboard spray and plastics care product may contain ingredients that will damage the surface of the car sound system. Use only a dry or slightly moistened cloth for cleaning the car sound system. Disposal notes Do not dispose of your old unit in the household trash! Use the return and collection systems available to dispose of the old device. Scope of delivery The scope of delivery includes: 1 Car sound system 1 operating instructions Use as directed This car sound system is intended for the installation and operation in a vehicle with 12-V vehicle supply voltage. The car sound system is equipped with two integrated loudspeakers and designed 4

5 General operation General operation Switching on/off Switching on/off with the On/Off button For switch-on, press the On/Off button 8. The car sound system switches on. To switch off the device, press and hold down the On/Off button 8 for longer than 2 seconds. The car sound system switches off. Notes: When you switch on the car sound system for the first time after connecting it to the power supply, the CPU loads all the data. Afterwards, the car sound system switches off. The loading process is not shown on the display. If you switch on the car sound system while the vehicle ignition is switched off, it automatically switches off after 1 hour to preserve the vehicle battery. Switching on/off via vehicle ignition If the car sound system is connected to the vehicle s ignition and you did not switch the device off by pressing the On/Off button 8, it is switched on or off with the ignition. Volume Adjusting the volume You can adjust the volume in steps from 0 (off) to 50 (maximum). Turn the volume control 9 to change the volume. Muting the car sound system (Mute) Briefly press the On/Off button 8 to mute the car sound system or to reactivate the previous volume. While it is muted, the display shows "MUTE". Overview of the menu operation The following buttons are required to operate the menu: To call up or close the menu, briefly press the button 5. To select a menu item, turn the volume control 9. Press the button 4 to open the selected menu item. To change the flashing setting of a menu item, turn the volume control 9. The setting is immediately effective and automatically stored. Notes: The menu is automatically exited approx. 10 seconds after the last button activation and you are returned to the display of the current audio source. The last setting is automatically stored. You can press the button 4 in each case to return to the higher menu level. Changing the presetting of the power-on volume The car sound system is factory-set so that it plays back the volume with a value of 20 upon switchon. You can set the power-on volume in the menu so that the playback after switch-on always starts with the previously selected volume. Briefly press the button 5 to open Turn the rotary control 9 until the "VOL" Press the button 4 to open the submenu. Turn the rotary control 9 until the "LASTV" Press the button 4 to change the selected setting. Turn the volume control 9 to change between the settings "ON" and "OFF". 5

6 General operation Radio mode Selecting equalizer presettings This car sound system features an equalizer in which the settings for the music genres "CLASS" (classic), "ROCK" and "POP" are already programmed. Briefly press the button 5 to open Turn the volume control 9 until the "AUDIO" Press the button 4 to open the submenu. Press the button 4 again to change the selected setting. Turn the volume control 9 to select one of the presettings or select "EQOFF" to switch off the equaliser. Switching the confirmation beep on/ off If you press a button for an extended period of time for some functions, a confirmation beep sounds. You can switch off the confirmation beep. Briefly press the button 5 to open Turn the rotary control 9 until the "VOL" Press the button 4 to open the submenu. Turn the volume control 9 until the "BEEP" Press the button 4 to change the selected setting. Turn the volume control 9 to change between the settings "ON" and "OFF". Radio mode Setting the reception area This car sound system is designed for operation in different regions with different frequency ranges and station technologies. The factory default of the reception area is "EU" (Europe). Other available reception areas are "US" (USA), "SA" (South America) and "TL" (Thailand). If you operate the car sound system outside of Europe, you may first have to set a suitable reception area in the menu: Briefly press the button 5 to open Turn the volume control 9 until the "TUNER" Press the button 4 to open the submenu. Turn the volume control 9 until the "AREA" Press the button 4 to change the selected setting. Turn the volume control 9 to select a reception area. RDS Many FM stations broadcast an RDS (Radio Data System) signal in addition to their programme in the reception area "EU" (Europe) that allows the following additional functions: The station name is shown on the display. The car sound system recognises traffic announcements and can automatically switch them through in other operating modes (e.g. in USB mode). Alternate frequency: If RDS is activated, the car sound system automatically selects the best receivable frequency for the station that is currently set. Regional: At certain times, some radio stations divide their programme into regional programmes providing different content. If the REGIONAL function is activated, the car 6

7 Radio mode sound system changes only to those alternate frequencies on which the same regional programme is being broadcast. The functions RDS and REGIONAL are switched on and off in Briefly press the button 5 to open Turn the volume control 9 until the "TUNER" Press the button 4 to open the submenu. Turn the volume control 9 until the "RDS" or "REG" Press the button 4 to change the selected setting. Turn the volume control 9 to change between the settings "ON" and "OFF". If you adjust a different reception area than "EU" (Europe), RDS is automatically switched off. Traffic information In the reception area "EU" (Europe), an FM station can identify traffic reports by means of an RDS signal. If priority for traffic reports is switched on, a traffic report is automatically switched through, even if the car sound system is currently not in radio mode. "TRAFFIC" is displayed during a switched-through traffic announcement. To cancel a switched-through traffic announcement, press the SRC button 2. Switching priority for traffic announcements on/off Briefly press the button 5 to open Turn the volume control 9 until the "TUNER" Press the button 4 to open the submenu. Turn the volume control 9 until the "TRAF" Press the button 4 to change the selected setting. Turn the volume control 9 to change between the settings "ON" and "OFF". Setting the minimum volume for traffic announcements The volume is increased for the duration of the switched-through traffic announcement. You can adjust the minimum volume for traffic announcements. Briefly press the button 5 to open Turn the volume control 9 until the "VOL" Press the button 4 to open the submenu. Turn the volume control 9 until the "TAVOL" Press the button 4 to change the selected setting. Turn the volume control 9 the adjust the minimum volume between 1 and 50. Changing to radio mode or selecting a waveband The following wavebands are available in the different reception areas: Region EU (Europe) US (USA) SA (South America) TL (Thailand) Wavebands FM, MW FM, AM FM, AM FM, AM Press the SRC button 2 repeatedly until the desired waveband is displayed: 7

8 Radio mode USB mode Tuning into a station There are various ways of tuning into a station: Starting station seek tuning Briefly press the / button 4 to start the station seek tuning. The radio tunes into the next receivable station. For the reception area "EU" (Europe): In the FM waveband, only traffic information stations are tuned into if the priority for traffic information is switched on. Tuning into stations manually Press the / button 4 for approx. 2 seconds to switch on the manual station seek tuning. To change the frequency in decrements/increments, briefly press the / button 4 once or several times. To change the frequency quickly, press and hold down the / button 4. After approx. 5 seconds without any activity, the manual station seek tuning is automatically switched off. If you briefly press the / button 4 in this case, the car sound system starts the station seek tuning. Storing stations Up to 5 stations can be stored on each waveband. Select the desired waveband and adjust the station. Press the button 5 for approx. 2 seconds to change to the memory location level. Use the button 4 to select the memory location (memory locations 1 to 5) to which the set station should be stored. The memory location number appears on the left side on the display. Press the button 4 for approx. 2 seconds to store the station. The system exits the memory location level and the station is stored at the selected memory location. If the memory location is already occupied, it is overwritten with a new store process. Calling up a stored station Select the desired waveband. Press the button 5 for approx. 2 seconds to change to the memory location level. Use the button 4 to select the memory location (memory locations 1 to 5) where the desired station is stored. You hear the stored station with every change of the memory location. USB mode Basic information This car sound system can be used to play MP3 files on USB data carriers. Blaupunkt cannot guarantee the proper functioning of all USB data carriers available on the market. Note the following information when preparing an MP3 data carrier: Naming of tracks and directories: Max. 24 characters without the file extension ".mp3" (the use of more characters reduces the number of tracks and folders that the car sound system can recognise) No umlauts or special characters USB format/file system: Mass storage device/ FAT16/32 8

9 USB mode File extension of audio files:.mp3 for MP3 files Bit rate for creating audio files: MP3: 32 to 320 kbps Depending on the data structure on the USB medium, up to 20,000 entries can be managed. Connecting/removing a USB data carrier Connecting a USB data carrier Insert the USB data carrier in the USB socket :. The car sound system automatically switches to USB mode. The data are read in, playback begins with the first track that the device detects. Notes: If the USB data carrier is defective or the transferred data cannot be played back, the display briefly shows "ERROR" and the car sound system changes to the previous audio source. This car sound system cannot be used for charging USB device or mobile phone. Removing a USB data carrier Disconnect the USB data carrier. Changing to USB mode Press the SRC button 2 repeatedly until "USB" is displayed: The USB mode can be selected only if a valid USB data carrier is connected. Selecting tracks Briefly press the / button 4 to change to the previous/next track. Selecting folders Press the button 5 for approx. 2 seconds to call up the folder mode. The display shows the symbol. Briefly press the / button 4 to change to the previous/next folder. After approx. 5 seconds without any activity, the folder mode exits automatically. In this case, use the / button 4 to select a different track. Fast searching Press and hold down the / button 4 until the desired position has been reached. Playback options The MIX function plays all the tracks of the data carrier in random order. The RPT function plays the current folder repeatedly. The playback options are switched on and off in The MIX function is automatically switched off by switching on the RPT function or vice versa. Briefly press the button 5 to open Turn the volume control 9 until the "MEDIA" Press the button 4 to open the submenu. Turn the volume control 9 until the "MIX" or "RPT" Press the button 4 to change the selected setting. Turn the volume control 9 to change between the settings "ON" and "OFF". 9

10 External audio sources Factory settings Useful information External audio sources AUX-IN socket DANGER! Increased risk of injury from connector. In case of an accident, the protruding connector in the AUX-IN socket may cause injuries. The use of straight plugs or adapters leads to an increased risk of injury. For this reason, it is recommended to use angled jack plugs. As soon as an external audio source, such as a portable MP3 player, is connected to the AUX-IN socket 7, it can be selected with the SRC button 2. "AUX" then appears on the display. Factory settings You can reset the car sound system to the factory settings. Briefly press the button 5 to open Turn the volume control 9 until the "RESET" Press the button 4 to open the submenu. Press the button 4. The display shows "PRESS > TO CONTINUE". Press the button 4 again to confirm the reset. The car sound system switches off and is reset to the factory settings. Factory settings in the menu: Menu item Factory setting AREA EU (Europe) RDS ON REG* OFF TRAF* OFF TA VOL* 20 LAST VOL OFF BEEP ON EQ OFF MIX OFF RPT OFF * Only in reception area "EU" (Europe) Useful information Warranty We provide a manufacturer's warranty for products bought within the European Union. For devices purchased outside the European Union, the warranty terms issued by our respective responsible domestic agency are valid. The warranty terms can be called up from Service In some countries, Blaupunkt offers a repair and pick-up service. Information about the availability of this service in your country can be found at com. If you want to take advantage of this service, you may request a pick-up service for your car sound system via the Internet. 10

11 Technical data Connection assignment Technical data Voltage supply Operating voltage: V Current consumption In operation: < 250 ma 10 sec. after Switch-off: < 1 ma Amplifier Output power: 2 x 16 watts sine at 14.4 V at 4 ohms with 10 % THD 2 x 40 watts max. power Tuner Wavebands in Europe/Thailand: FM: MHz AM (MW): 531 1,602 khz Wavebands in the US: FM: AM (MW): MHz 530 1,710 khz Wavebands in South America: FM: MHz AM (MW): 530 1,710 khz FM frequency response: 30 15,000 Hz Input sensitivity AUX-IN: 300 mv / 10 kω Dimensions and weight W x H x D: 178 x 51 x 165 mm Weight: approx kg Connection assignment 10A FUSE Pin Assignment 1 10 ampere fuse 2 3 Battery +12 V 4 Ground 5 Ignition 6 Ext. Antenna Supply +12 V (max. 150 ma) 7 Headphone Left* 8 Headphone Ground* 9 Headphone Right* 10 NC 11 NC 12 NC 13 NC 14 NC 15 NC 16 NC 17 NC 18 NC * Available as option Subject to changes 11

13 Please keep the filled-in radio pass in a safe place! 13

14 Passport Casablanca 2012 Name: Type:... Serial no.: BP... Blaupunkt Europe GmbH Robert-Bosch-Straße 200 D Hildesheim /13