Precision 8-Channel / Dual 4-Channel CMOS Analog Multiplexers
|
|
- Alfred Walsh
- 7 years ago
- Views:
Transcription
1 Precision 8-Channel / ual 4-Channel CMOS Analog Multiplexers ESCRIPTION The G508B is an 8-channel single-ended analog multiplexer designed to connect one of eight inputs to a common output as determined by a 3-bit binary address (,, A 2 ). The G509B is a dual 4-channel differential analog multiplexer designed to connect one of four differential inputs to a common dual output as determined by its 2-bit binary address (, ). Break-before-make switching action protects against momentary crosstalk between adjacent channels. An on channel conducts current equally well in both directions. In the off state each channel blocks voltages up to the power supply rails. An enable (EN) function allows the user to reset the multiplexer / demultiplexer to all switches off for stacking several devices. All control inputs, addresses (A X ) and enable (EN) are TTL compatible over the full specified operating temperature range. The G508B and G509B are fabricated on an enhanced SG-II CMOS process that achieves improved performance on: reduced charge injection, lower device leakage, and minimized parasitic capacitance. As the G508, G509 has a long history in the industry with many suppliers offering copies - and in some cases improved variations - with the best in class improvements, the new version of the are the superior alternatives to what is currently available. Applications for the include high speed and high precision data acquisition, audio signal switching and routing, ATE systems, and avionics. High performance and low power dissipation make them ideal for battery operated and remote instrumentation applications. The G508B and G509B have the absolute maximum voltage rating extended to 44 V. Additionally, single supply operation is also allowed. An epitaxial layer prevents latch-up. The G508B and G509B are both available in 16-lead SOIC, TSSOP, PIP, and miniqfn (1.8 mm x 2.6 mm) package options with extended temperature range of -40 C to +125 C. For more information, refer to G508B, G509B evaluation board note. FEATURES Operate with single or dual power supply to V- analog signal swing range 44 V power supply maximum rating Extended operate temperature range: -40 C to +125 C Low leakage typically < 3 pa Low charge injection - Q INJ = 2 pc Low power - I SUPPLY : 10 μa TTL compatible logic > ma latch-up current per JES78 Available in SOIC16, TSSOP16, PIP, and miniqfn16 packages Superior alternative to: - AG508A, G508A, HI AG509A, G509A, HI-509 Material categorization: for definitions of compliance please see BENEFITS Reduced switching errors Reduced glitching Improved data throughput Reduced power consumption Increased ruggedness Wide supply ranges (± 5 V to ± 20 V) APPLICATIONS ata acquisition systems Audio and video signal routing ATE systems Medical instrumentation S Rev. E, 15-ec-14 1 ocument Number: 64821
2 FUNCTIONAL BLOCK IAGRAM AN PIN CONFIGURATION G508B ual-in-line SOIC and TSSOP G509B ual-in-line SOIC and TSSOP EN 2 ecoders/rivers 15 A 2 EN 2 ecoders/rivers 15 GN V GN V S S 1a 4 13 S 1b S S 5 S 2a 5 12 S 2b S S 6 S 3a 6 11 S 3b S S 7 S 4a 7 10 S 4b 8 9 S 8 a 8 9 b Top view Top view G508B miniqfn-16l G509B miniqfn-16l GN S 5 S S 1B S 2B S 3B A S 7 GN 13 8 S 4B A1 14 A0 15 ecoders/ rivers 6XX 7 6 S 8 A1 14 A0 15 ecoders/ rivers 7XX 7 6 B A EN S 4 EN S 4A V- S 1 S 2 S 3 Pin 1: LONG LEA Top View evice Marking: 6XX Traceability Code: 6 is G508BEN XX = ate/lot V- S 1A S 2A S 3A Pin 1: LONG LEA Top View evice Marking: 7XX Traceability Code: 7 is G509BEN XX = ate/lot TRUTH TABLES AN ORERING INFORMATION TRUTH TABLE (G508B) A 2 EN ON SWITCH X X X 0 None TRUTH TABLE (G509B) EN ON SWITCH X X 0 None Logic 0 = V IL 0.8 V Logic 1 = V IH 2 V X = o not care S Rev. E, 15-ec-14 2 ocument Number: 64821
3 ORERING INFORMATION (G508B) TEMP. RANGE PACKAGE PART NUMBER 16-Pin SOIC G508BEY-T1-E3 16-Pin TSSOP G508BEQ-T1-E3-40 C to +125 C a 16-Pin PIP G508BEJ-E3 16-Pin MiniQFN G508BEN-T1-GE4 ORERING INFORMATION (G509B) TEMP. RANGE PACKAGE PART NUMBER 16-Pin SOIC G509BEY-T1-E3 16-Pin TSSOP G509BEQ-T1-E3-40 C to +125 C a 16-Pin PIP G509BEJ-E3 16-Pin MiniQFN G509BEN-T1-GE4 Note a. -40 C to +85 C datasheet limits apply. ABSOLUTE MAXIMUM RATINGS PARAMETER LIMIT UNIT 44 Voltages Referenced to V- GN 25 V igital Inputs a (V-) - 2 to () + 2, V S, V or 20 ma, whichever occurs first Current (Any terminal) 30 ma Peak Current, S or (Pulsed at 1 ms, 10 % duty cycle max.) Storage Temperature (EY, EQ, EJ, EN suffix) -65 to + C Power issipation (Packages) b Thermal Resistance (θja) b 16-Pin Narrow SOIC c Pin TSSOP d Pin PIP e Pin miniqfn f Pin Narrow SOIC c Pin TSSOP d Pin PIP e Pin miniqfn f 152 Notes a. Signals on SX, X or INX exceeding or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads soldered or welded to PC board. c. erate 8 mw/ C above 70 C. d. erate 5.6 mw/ C above 70 C. e. erate 6.3 mw/ C above 70 C. f. erate 6.6 mw/ C above 70 C. mw C/W S Rev. E, 15-ec-14 3 ocument Number: 64821
4 SPECIFICATIONS TEST CONITIONS UNLESS OTHERWISE -40 C to +125 C -40 C to +85 C PARAMETER SYMBOL SPECIFIE TEMP. b TYP. c UNIT = 15 V, V- = -15 V (± 10 %) MIN. d MAX. d MIN. d MAX. d V AX, V EN = 2 V, 0.8 V a Analog Switch Analog Signal Range e V ANALOG Full V rain-source Room R On-Resistance S(on) V = ± 10 V, I S = -1 ma Full Ω R S(on) Matching ΔR S(on) V = ± 10 V Room Source Off Leakage Room I Current S(off) Full rain Off Leakage Current I (off) V = ± 10 V Room V S = + 10 V G508B V EN = 0 V Full Room G509B na Full rain On Leakage Current I (on) Room V S = V = 10 V G508B + Full sequence each switch on Room G509B Full igital Control Logic High Input Voltage V INH Full Logic Low Input Voltage V INL Full V Logic High Input Current I IH V AX, V EN = 2 V Full Logic Low Input Current I IL V AX, V EN = 0.8 V Full μa Logic Input Capacitance e C IN f = 1 MHz Room pf ynamic Characteristics Transition Time t TRANS VS 1 = +10 V/-10 V, VS 8 = -10 V/+10 V, R L = 1 MΩ, C L = 35 pf Room Full Break-Before-Make VS t 1 = VS 8 = 5 V, C L = 35 pf, Room Interval OPEN R L = 1 kω Full ns Enable Turn-On Time t ON(EN) VS 1 = 5 V, VS 2 to VS 8 = 0 V, Room Full Enable Turn-Off Time t OFF(EN) R L = 1 kω, C L = 35 pf Room Full Charge Injection e Q INJ C L = 1 nf, R GEN = 0 W, V GEN = 0 V Full pc Off Isolation e OIRR Room C L = 5 pf, R L = 50 Ω, f = 1 MHz Crosstalk e X TALK Room db -3 db Bandwidth e BW R L = 50 Ω Room MHz Total Harmonic istortion e Source Off Capacitance e TH R L = 10 kω, 5 V rms f = 20 Hz to 20 khz Room % C S(off) Room rain Off Capacitance e G508B Room C (off) f = 1 MHz G509B Room rain On Capacitance e G508B Room C (on) G509B Room Power Supply Room Positive Supply Current I+ ma V AX, V EN = 0.8 V or 2.4 V Full Negative Supply Current I- Full μa pf S Rev. E, 15-ec-14 4 ocument Number: 64821
5 SPECIFICATIONS (Single Supply 12 V) TEST CONITIONS UNLESS OTHERWISE -40 C to +125 C -40 C to +85 C PARAMETER SYMBOL SPECIFIE TEMP. b TYP. c UNIT = 12 V, V- = 0 V (± 10 %) MIN. d MAX. d MIN. d MAX. d V AX, V EN = 2 V, 0.8 V a Analog Switch Analog Signal Range e V ANALOG Full V On-Resistance R S(on) Room V = 10 V/0 V, Full Ω R S(on) Matching ΔR S(on) Room I S(off) Room Full = 12 V, V- = 0 V Switch Off Leakage Room I V Current (off) = 0 V/10 V, G508B V S = 10 V/0 V Full na I (off) G509B Room Full Room G508B Channel On Leakage = 12 V, V- = 0 V Full I Current (on) V S = V = 0 V/10 V Room G509B Full na igital Control Logic High Input Voltage V INH Full Logic Low Input Voltage V INL Full V Logic High Input Current I IH V AX, V EN = 2 V Full Logic Low Input Current I IL V AX, V EN = 0.8 V Full μa Logic Input Capacitance e C IN f = 1 MHz Room pf ynamic Characteristics VS Transition Time t 1 = 10 V/0 V, VS 8 = 0 V/10 V, Room TRANS R L = 1 MΩ, C L = 35 pf Full Break-Before-Make VS t 1 = VS 8 = 5 V, C L = 35 pf, Room Interval OPEN R L = 1 kω Full Room Enable Turn-On Time t ON(EN) VS 1 = 5 V, VS 2 to VS 8 = 0 V, Full ns Enable Turn-Off Time t OFF(EN) R L = 1 kω, C L = 35 pf Room Full Charge Injection e Q INJ C L = 1 nf, R GEN = 0 Ω, V GEN = 0 V Full pc Off Isolation e OIRR C L = 5 pf, R L = 50 Ω Room Crosstalk e X TALK f = 1 MHz Room db -3 db Bandwidth e BW R L = 50 Ω Room MHz Total Harmonic istortion e R TH L = 10 kω, 5 V RMS, f = 20 Hz to 20 khz Room % Source Off Capacitance e C S(off) G508B rain Off Capacitance e C (off) f = 1 MHz G509B Room pf G508B Channel On Capacitance e C (on) G509B S Rev. E, 15-ec-14 5 ocument Number: 64821
6 SPECIFICATIONS (Single Supply 12 V) PARAMETER Power Supply SYMBOL TEST CONITIONS UNLESS OTHERWISE SPECIFIE = 12 V, V- = 0 V (± 10 %) V AX, V EN = 2 V, 0.8 V a Positive Supply Current I+ V AX, V EN = 0.8 V or 2.4 V TEMP. b Room Full Notes a. V AX, V EN = input voltage perform proper function. b. Room = 25 C, Full = as determined by the operating temperature suffix. c. Typical values are for ESIGN AI ONLY, not guaranteed nor subject to production testing. d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this datasheet. e. Guaranteed by design, not subject to production test. f. ΔR S(on) = R S(on) max. - R S(on) min. TYP. c -40 C to +125 C -40 C to +85 C MIN. d MAX. d MIN. d MAX. d UNIT ma Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. SCHEMATIC IAGRAM (Typical Channel) GN V RE F A X Level Shift ecode/ rive V- S 1 EN S n V- Fig. 1 S Rev. E, 15-ec-14 6 ocument Number: 64821
7 TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) R ON - On-Resistance (Ω) V = V V = V V = V T = 25 C V = V R ON - On-Resistance (Ω) T = 25 C V = ± 13.5 V V = ± 15 V V = ± 20 V V = ± 5.0 V V = ± 10.8 V V - Analog Voltage (V) V - Analog Voltage (V) On-Resistance vs. V and Single Supply Voltage On-Resistance vs. V and ual Supply Voltage R ON - On-Resistance (Ω) V = V C + 85 C + 25 C - 40 C R ON - On-Resistance (Ω) V = + 12 V + 85 C + 25 C - 40 C C V - Analog Voltage (V) V - Analog Voltage (V) On-Resistance vs. Analog Voltage and Temperature On-Resistance vs. Analog Voltage and Temperature V = + 20 V V = + 36 V R ON - On-Resistance (Ω) C + 85 C + 25 C - 40 C R ON - On-Resistance (Ω) C + 85 C + 25 C - 40 C V - Analog Voltage (V) On-Resistance vs. Analog Voltage and Temperature V - Analog Voltage (V) On-Resistance vs. Analog Voltage and Temperature S Rev. E, 15-ec-14 7 ocument Number: 64821
8 TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) V = ± 5 V V = ± 10.8 V R ON - On-Resistance (Ω) C + 85 C + 25 C - 40 C R ON - On-Resistance (Ω) C + 85 C + 25 C - 40 C V - Analog Voltage (V) V - Analog Voltage (V) On-Resistance vs. Analog Voltage and Temperature On-Resistance vs. Analog Voltage and Temperature 350 V = ± 13.5 V 350 V± = ± 15.0 V R ON - On-Resistance (Ω) C + 85 C + 25 C - 40 C R ON - On-Resistance (Ω) C + 85 C + 25 C - 40 C V - Analog Voltage (V) On-Resistance vs. Analog Voltage and Temperature V - Analog Voltage (V) On-Resistance vs. Analog Voltage and Temperature 350 V = ± 20 V C + 85 C + 25 C - 40 C R ON - On-Resistance ( ) V T - Switching Threshold (V) V IH V IL V - Analog Voltage (V) On-Resistance vs. Analog Voltage and Temperature Supply Voltage (V) Switching Threshold vs. Supply Voltage S Rev. E, 15-ec-14 8 ocument Number: 64821
9 TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) 10 R L = 10 k V Signal = 5 V RMS ma TH (%) V = + 12 V V = ± 15 V I+ - Supply Current (A) 10 ma 1 ma µa 10 µa V = ± 15.0 V V = V Frequency (Hz) TH vs. Frequency 1 µa 10 1K 10K K 1M 10M Input Switching Frequency (Hz) Supply Current vs. Input Switching Frequency V = +36 /- = +/-15V 0 I+ - Supply Current (μa) -40 C 25 C 125 C 85 C I+ - Supply Current (μa) C 85 C 25 C -40 C V AX, V EN -(V) V AX, V EN -(V) Supply Current vs. V AX, V EN Supply Current vs. V AX, V EN Loss, OIRR, XTALK (db) K = 12 V R L = 50 Frequency (Hz) Loss OIRR X Talk 1M 10M M M Insertion Loss, Off-Isolation, Crosstalk vs. Frequency Loss, OIRR, XTALK (db) V = ± 15 V R L = 50 Loss - K 1M 10M M M Frequency (Hz) OIRR X Talk Insertion Loss, Off-Isolation, Crosstalk vs. Frequency S Rev. E, 15-ec-14 9 ocument Number: 64821
10 TYPICAL CHARACTERISTICS (25 C, unless otherwise noted) I- - Supply Current (A) ma 10 ma 1 ma V = ± 15.0 V µa 10 µa V = V 1 µa na 10 na 1 na 10 1K 10K K 1M 10M Input Switching Frequency (Hz) Supply Current vs. Input Switching Frequency Q INJ - Charge Injection (pf) V = + 12 V C L = 1 nf V = ± 15 V C L = 1 nf V S - Analog Voltage (V) Charge Injection vs. Analog Voltage Leakage Current (pa) V = ± 15.0 V I (OFF) I (ON) Leakage Current (pa) I (OFF) V = ± 15 V T = 25 C I (ON) I S(OFF) I S(OFF) Temperature (ºC) Leakage Current vs. Temperature Analog Voltage (V) Leakage Current vs. Analog Voltage S Rev. E, 15-ec ocument Number: 64821
11 TEST CIRCUITS + 15 V A 2 S 1 ± 10 V V EN GN G508B S 2 - S 7 S 8 V- 1 M - 15 V ± 10 V 35 pf Logic Input 3 V 0 V 50 % t r < 20 ns t f < 20 ns V + 15 V S 1b S 1a - S 4a, a S G509B 4b EN b GN V- 1 M - 15 V ± 10 V ± 10 V 35 pf Switch Output V S1 0 V V S8 t TR A N S S 1 ON 90 % S 8 ON 90 % t TR A N S Fig. 2 - Transition Time + 15 V EN S 1 5 V 50 A0 A 2 S 2 - S 8 G508B GN V V - 15 V 1 k 35 pf Logic Input Switch Output 3 V 0 V t ON(EN) 0 V 50 % t r < 20 ns t f < 20 ns t OFF(EN) 10 % EN S 1b 5 V 90 % S 1a - S 4a, a S 2b - S 4b 50 G509B GN V- b 1 k - 15 V 35 pf Fig. 3 - Enable Switching Time S Rev. E, 15-ec ocument Number: 64821
12 TEST CIRCUITS + 15 V V 50 EN A 2 G508B G509B All S and a GN V- b, - 15 V 1 k + 5 V 35 pf Logic Input Switch Output 3 V 0 V 0 V 50 % 80 % t OPEN t r < 20 ns t f < 20 ns Fig. 4 - Break-Before-Make Interval + 15 V R g S X EN Logic Input 3 V 0 V OFF ON OFF Channel Select A 2 GN V V C L 1 nf Switch Output is the measured voltage due to charge transfer error Q, when the channel turns off. Q INJ = C L x Fig. 5 - Charge Injection + 15 V + 15 V V S V IN S X V S S 1 R g = 50 Ω S 8 R g = 50 Ω A 2 GN EN V- R L 50 Ω A 2 GN EN V- R L 50 Ω - 15 V Of f Isolation = 20 log U T V IN - 15 V Insertion Loss = 20 log U T V IN Fig. 6 - Off Isolation Fig. 7 - Insertion Loss S Rev. E, 15-ec ocument Number: 64821
13 TEST CIRCUITS V IN S V + 15 V R g = 50 Ω V S S X S 8 A 2 GN EN V- R L 50 Ω Channel Select A 2 A1 GN EN S 1 S 8 V- Meter HP4192A Impedance Analyzer or Equivalent f = 1 MHz - 15 V Crosstalk = 20 log UT V IN - 15 V Fig. 8 - Crosstalk Fig. 9 - Source rain Capacitance maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see S Rev. E, 15-ec ocument Number: 64821
14 Thin miniqfn16 Case Outline Package Information A B Terminal tip (4) 16 x b M M C AB C C E L C Pin #1 identifier (5) 15 x L e Top view Bottom view C Seating plane Side view A3 A 0.10 C 0.10 C IMENSIONS MILLIMETERS (1) INCHES MIN. NOM. MAX. MIN. NOM. MAX A A ref ref. b e 0.40 BSC BSC E L L N (3) Nd (3) 4 4 Ne (3) 4 4 Notes (1) Use millimeters as the primary measurement. (2) imensioning and tolerances conform to ASME Y14.5M (3) N is the number of terminals. Nd and Ne is the number of terminals in each and E site respectively. (4) imensions b applies to plated terminal and is measured between 0.15 mm and 0.30 mm from terminal tip. (5) The pin 1 identifier must be existed on the top surface of the package by using identification mark or other feature of package body. (6) Package warpage max mm. ECN: T Rev. B, 09-May-16 WG: 6023 Revision: 09-May-16 1 ocument Number: 64694
15 Package Information JEEC Part Number: MS E im Min Max Min Max B C E e 1.27 BSC BSC H L ECN: S Rev. F, 09-Jul-01 WG: 5 H C All Leads e B A1 L mm IN ocument Number: Jul
16 Package Information E 1 E S Q 1 A L B 1 e 1 B C e A 15 MAX im Min Max Min Max A B B C E E e e A L Q S ECN: S Rev., 09-Jul-01 WG: 5482 ocument Number: Jul
17 Package Information TSSOP: 16-LEA IMENSIONS IN MILLIMETERS Symbols Min Nom Max A A A B C E E e L L y θ ECN: S Rev., 23-Oct-06 WG: 5624 ocument Number: Oct
18 PA Pattern RECOMMENE MINIMUM PA FOR TSSOP (4.90) (1.40) (7.15) (4.35) (0.35) (0.65) (0.30) Recommended Minimum Pads imensions in inches (mm) Revision: 02-Sep-11 1 ocument Number: 63550
19 PA Pattern RECOMMENE MINIMUM PAS FOR MINI QFN 16L (0.0221) (0.0157) (0.0089) (0.1142) (0.0182) 1. (0.0472) 2. (0.0827) Mounting Footprint imensions in mm (inch) ocument Number: Revision: 05-Mar-10 1
20 Application Note 826 RECOMMENE MINIMUM PAS FOR SO-16 RECOMMENE MINIMUM PAS FOR SO (9.449) (1.194) APPLICATION NOTE (6.248) (3.861) (0.559) (1.270) (0.711) Recommended Minimum Pads imensions in Inches/(mm) Return to Index Return to Index ocument Number: Revision: 21-Jan-08
21 Legal isclaimer Notice Vishay isclaimer ALL PROUCT, PROUCT SPECIFICATIONS AN ATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR ESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13-Jun-16 1 ocument Number: 90
700 MHz, -3 db Bandwidth; Dual SPDT Analog Switch
7 MHz, -3 db Bandwidth; Dual SPDT Analog Switch DESCRIPTION is a low R ON, high bandwidth analog switch configured in dual SPDT. It achieves 5.5 Ω switch on resistance, greater than 7 MHz -3 db bandwidth
More informationHigh-Bandwidth, Low Voltage, Dual SPDT Analog Switches
DG, DG High-Bandwidth, Low Voltage, Dual SPDT Analog Switches DESCRIPTION The DG/DG are monolithic CMOS dual single-pole/double-throw (SPDT) analog switchs. They are specifically designed for low-voltage,
More informationDG2706. High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch. Vishay Siliconix DESCRIPTION FEATURES APPLICATIONS
High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch DESCRIPTION The DG2706 is a high speed, low voltage, low On-resistance, quad SPDT (single pole double throw) analog switch. It operates from a.6
More informationHigh-Speed, Low-Glitch D/CMOS Analog Switches
G6, G62, G63 High-Speed, Low-Glitch /CMOS Analog Switches ESCRIPTION The G6, G62, G63 feature high-speed lowcapacitance lateral MOS switches. Charge injection has been minimized to optimize performance
More information1 pc Charge Injection, 100 pa Leakage CMOS 5 V/5 V/3 V 4-Channel Multiplexer ADG604
a FEATURES 1 pc Charge Injection (Over the Full Signal Range) 2.7 V to 5.5 V ual Supply 2.7 V to 5.5 ingle Supply Automotive Temperature Range: 4 C to +125 C 1 pa Max @ 25 C Leakage Currents 85 Typ On
More informationPrecision Monolithic Quad SPST CMOS Analog Switches
G4HS, G42HS, G43HS Precision Monolithic Quad SPST MOS Analog Switches ESRIPTION The G4HS series of monolithic quad analog switches was designed to provide high speed, low error switching of precision analog
More informationDG2731/2732/2733. Low Voltage, 0.4 Ω, Dual SPDT Analog Switch. Vishay Siliconix. RoHS COMPLIANT FEATURES
Low Voltage, 0.4 Ω, Dual SPDT Analog Switch DG273/2732/2733 DESCRIPTION The DG273/2732/2733 are low voltage, low on-resistance, dual single-pole/double-throw (SPDT) monolithic CMOS analog switches designed
More informationDG2515, DG2516. 3-Ω, 235-MHz Bandwidth, Dual SPDT Analog Switch. Vishay Siliconix. Not for New Design. RoHS COMPLIANT DESCRIPTION FEATURES BENEFITS
Not for New Design DG, DG -Ω, -MHz Bandwidth, Dual SPDT Analog Switch DESCRIPTION The DG, DG are low-voltage dual single-pole/ double-throw monolithic CMOS analog switches. Designed to operate from.8 V
More informationDG4157. Low Voltage, 1 Ω Single SPDT Analog Switch (1:2 Multiplexer) with Power Down Protection. Vishay Siliconix. www.vishay.com DESCRIPTION FEATURES
Low Voltage, Ω ingle PDT nalog witch (:2 Multiplexer) with Power Down Protection DECRIPTION The is a high performance single pole double throw analog switch designed for.65 V to 5.5 V operation with single
More information2 Port, USB 2.0 High Speed (480 Mbps) Switch, DPDT Analog Switch
2 Port, UB 2. High peed (48 Mbps) witch, DPDT Analog witch DG2722 DECRIPTION The DG2722 is 2 port high speed analog switch optimized for UB 2. signal switching. The DG2722 switch is configured in DPDT.
More informationSmall Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial
More informationP-Channel 20 V (D-S) MOSFET
Si30CDS P-Channel 0 V (D-S) MOSFET MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a Q g (Typ.) - 0 0. at V GS = - 4.5 V - 3. 0.4 at V GS = -.5 V -.7 3.3 nc TO-36 (SOT-3) FEATURES Halogen-free According
More informationN-Channel 30-V (D-S) MOSFET
Si3456V N-Channel 3-V (-S) MOSFET PROUCT SUMMARY V S (V) R S(on) (Ω) I (A) d Q g (Typ.) 3.4 at V GS = V 6.3.5 at V GS = 4.5 V 5.7 TSOP-6 Top View.8 nc FEATURES Halogen-free According to IEC 649-- efinition
More information5 V, 1 A H-Bridge Motor Driver
, A H-Bridge Motor Driver DESCRIPTION The SIP200 is an integrated, buffered H-bridge with TTL and CMOS compatible inputs with the capability of delivering up to A continuous current at DD supply. The SIP200
More informationP-Channel 20-V (D-S) MOSFET
Si33DS P-Channel -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).39 at V GS = -.5 V -.7 -.5 at V GS = -.5 V -..68 at V GS = -.8 V - 3.5 FEATURES Halogen-free According to IEC 69-- Available
More informationDG2302. High-Speed, Low r ON, SPST Analog Switch. Vishay Siliconix. (1-Bit Bus Switch with Level-Shifter) RoHS* COMPLIANT DESCRIPTION FEATURES
High-Speed, Low r ON, SPST Analog Switch (1-Bit Bus Switch with Level-Shifter) DG2302 DESCRIPTION The DG2302 is a high-speed, 1-bit, low power, TTLcompatible bus switch. Using sub-micron CMOS technology,
More informationP-Channel 12 V (D-S) MOSFET
New Product SiEH P-Channel V (-S) MOSFET PROUCT SUMMARY V S (V) R S(on) ( ) I (A) a Q g (Typ.) G -. at V GS = -.5 V -.6 at V GS = -.5 V -.7 at V GS = -.8 V -. at V GS = -.5 V - SOT-6 SC-7 (6-LEAS) Top
More informationHigh-Speed, Low r ON, SPST Analog Switch (1-Bit Bus Switch)
High-Speed, Low r ON, SPST Analog Switch (1-Bit Bus Switch) DG2301 ishay Siliconix DESCRIPTION The DG2301 is a high-speed, 1-bit, low power, TTLcompatible bus switch. Using sub-micron CMOS technology,
More informationPS323. Precision, Single-Supply SPST Analog Switch. Features. Description. Block Diagram, Pin Configuration, and Truth Table. Applications PS323 PS323
Features ÎÎLow On-Resistance (33-ohm typ.) Minimizes Distortion and Error Voltages ÎÎLow Glitching Reduces Step Errors in Sample-and-Holds. Charge Injection, 2pC typ. ÎÎSingle-Supply Operation (+2.5V to
More informationCMOS 5 V/5 V 4 Dual SPST Switches ADG621/ADG622/ADG623
a FEATURE 5.5 (Max) On Resistance.9 (Max) On-Resistance Flatness 2.7 V to 5.5 ingle upply 2.7 V to 5.5 V ual upply Rail-to-Rail Operation 1-Lead OIC Package Typical Power Consumption (
More informationP-Channel 60 V (D-S) MOSFET
TP6K P-Channel 6 V (D-S) MOSFET G S PRODUCT SUMMARY V DS (V) R DS(on) ( ) V GS(th) (V) I D (ma) - 6 6 at V GS = - V - to - - 85 TO-6 (SOT-) Top View D Marking Code: 6Kwll 6K = Part Number Code for TP6K
More informationSmall Signal Fast Switching Diode FEATURES PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS
Small Signal Fast Switching Diode MARKING (example only) Bar = cathode marking XY = type code X Y 6 MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box
More informationOptocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package
ILD25T, ILD26T, ILD27T, ILD211T, ILD213T Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package i17925 A1 C2 A3 C4 i17918-2 8C 7E 6C 5E DESCRIPTION The ILD25T, ILD26T, ILD27T, ILD211T, and ILD213T
More informationLC 2 MOS 8-/16-Channel High Performance Analog Multiplexers ADG406/ADG407/ADG426
LC 2 MOS 8-/16-Channel High Performance Analog Multiplexers AG406/AG407/AG426 FEATURES 44 V supply maximum ratings VSS to V analog signal range Low on resistance (80 Ω maximum) Low power Fast switching
More informationPower MOSFET FEATURES. IRFZ44PbF SiHFZ44-E3 IRFZ44 SiHFZ44 T C = 25 C
Power MOSFET PRODUCT SUMMARY (V) 60 R DS(on) (Ω) V GS = 10 V 0.028 Q g (Max.) (nc) 67 Q gs (nc) 18 Q gd (nc) 25 Configuration Single FEATURES Dynamic dv/dt Rating 175 C Operating Temperature Fast Switching
More informationOptocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package
Optocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package FEATURES A 4 C Low profile package High collector emitter voltage, V CEO = 8 V 7295-6 DESCRIPTION The has a GaAs infrared
More information1 Form A Solid State Relay
1 Form A Solid State Relay Vishay Semiconductors DIP i1791- SMD DESCRIPTION Vishay solid state relays (SSRs) are miniature, optically coupled relays with high-voltage MOSFET outputs. The LH1518 relays
More information28 V, 56 m, Load Switch with Programmable Current Limit and Slew Rate Control
28 V, 56 m, Load Switch with Programmable Current Limit and Slew Rate Control OPERATION DESCRIPTION SiP32419 and SiP32429 are load switches that integrate multiple control features that simplify the design
More informationPhotovoltaic MOSFET Driver with Integrated Fast Turn-Off, Solid-State Relay
Photovoltaic MOSFET Driver with Integrated Fast Turn-Off, Solid-State Relay i7966_6 Turn Off FEATURES Open circuit voltage at I F = ma, 8. V typical Short circuit current at I F = ma, 5 μa typical Isolation
More informationAudio Jack Detector with Send / End Detect
Audio Jack Detector with Send / End Detect DESCRIPTION The is an audio jack detector and pop noise control switch IC. It integrates the circuits necessary to detect the presence of a stereo headset with
More informationPower MOSFET FEATURES. IRL540PbF SiHL540-E3 IRL540 SiHL540
Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) (Ω) = 5.0 V 0.077 Q g (Max.) (nc) 64 Q gs (nc) 9.4 Q gd (nc) 27 Configuration Single TO220AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G D S NChannel
More informationLow-Power, High-Speed CMOS Analog Switches
Low-Power, High-peed MO Analog es G1/3/ -V upply Max Rating 1-V Analog ignal Range On-Resistance r (on) : Low Leakage I (on) : pa Fast ing t ON : ns Ultra Low Power Requirements P :.3 W TTL, MO ompatible
More informationCMOS 5 V/+5 V 4 Single SPDT Switches ADG619/ADG620
a FEATURE (Max) On Resistance. (Max) On Resistance Flatness.7 V to 5.5 ingle upply.7 V to 5.5 V ual upply Rail-to-Rail Operation -Lead OT-3 Package, -Lead MOP Package Typical Power Consumption (
More information1 Form A Solid State Relay
Form A Solid State Relay VOAT, VOAABTR FEATURES 9 S S DC S' 3 S' High speed SSR - t on /t off < 8 μs Maximum R ON. Isolation test voltage 3 V RMS Load voltage V Load current A DC configuration DIP- package
More informationCMOS 1.8 V to 5.5 V, 2.5 Ω SPDT Switch/2:1 Mux in Tiny SC70 Package ADG779
CMO 1.8 V to 5.5 V, 2.5 Ω PT witch/2:1 Mux in Tiny C70 Package AG779 FEATURE 1.8 V to 5.5 V single supply 2.5 Ω on resistance 0.75 Ω on-resistance flatness 3 db bandwidth >200 MHz Rail-to-rail operation
More informationPower MOSFET. IRF510PbF SiHF510-E3 IRF510 SiHF510. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20
Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) () = 0.54 Q g max. (nc) 8.3 Q gs (nc) 2.3 Q gd (nc) 3.8 Configuration Single D TO220AB G FEATURES Dynamic dv/dt rating Available Repetitive avalanche rated
More informationOptocoupler, Phototransistor Output, with Base Connection, 300 V BV CEO
SFH64 Optocoupler, Phototransistor Output, with Base Connection, 3 V BV CEO i1794-3 DESCRIPTION The SFH64 is an optocoupler with very high BV CER, a minimum of 3 V. It is intended for telecommunications
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION 94 8632 is a PIN photodiode with high speed and high radiant sensitivity in a clear, side view plastic package. It is sensitive to visible and near infrared radiation.
More informationPower MOSFET FEATURES. IRF610PbF SiHF610-E3 IRF610 SiHF610. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 200 V Gate-Source Voltage V GS ± 20
Power MOSFET PRODUCT SUMMARY (V) 00 R DS(on) ( ) = 1.5 Q g (Max.) (nc) 8. Q gs (nc) 1.8 Q gd (nc) 4.5 Configuration Single FEATURES Dynamic dv/dt Rating Repetitive Avalanche Rated Fast Switching Ease of
More informationOptocoupler, Phototransistor Output, with Base Connection
4N25, 4N26, 4N27, 4N28 Optocoupler, Phototransistor Output, FEATURES A 6 B Isolation test voltage 5000 V RMS Interfaces with common logic families C 2 5 C Input-output coupling capacitance < pf NC 3 4
More informationPower MOSFET FEATURES. IRF740PbF SiHF740-E3 IRF740 SiHF740. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 400 V Gate-Source Voltage V GS ± 20
Power MOSFET PRODUCT SUMMARY (V) 400 R DS(on) (Ω) = 0.55 Q g (Max.) (nc) 63 Q gs (nc) 9.0 Q gd (nc) 3 Configuration Single FEATURES Dynamic dv/dt Rating Repetitive Avalanche Rated Fast Switching Ease of
More informationP-Channel 1.25-W, 1.8-V (G-S) MOSFET
Si5DS P-Channel.5-W,.-V (G-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).5 at V GS = -.5 V ±.5 -.7 at V GS = -.5 V ±. at V GS = -. V ± FEATURES Halogen-free According to IEC 9-- Available TrenchFET
More informationHigh Performance Schottky Rectifier, 3.0 A
High Performance Schottky Rectifier, 3. A Cathode Anode SMC PRODUCT SUMMARY Package SMC I F(AV) 3. A V R 4 V V F at I F.46 V I RM 3 ma at 25 C T J max. 5 C Diode variation Single die E AS 6. mj FEATURES
More informationN-Channel 100 V (D-S) MOSFET
Si4DS N-Channel V (D-S) MOSFET MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a Q g (Typ.).4 at V GS = V..67 at V GS = 6 V..9 nc.78 at V GS = 4.5 V.7 FEATURES TrenchFET Power MOSFET % R g Tested
More informationSchottky Rectifier, 1.0 A
Schottky Rectifier, 1.0 A VS-BQ060PbF Vishay High Power Products FEATURES Small foot print, surface mountable Low forward voltage drop SMB Cathode Anode High frequency operation Guard ring for enhanced
More informationHigh Performance Schottky Rectifier, 1.0 A
High Performance Schottky Rectifier, 1. A VS-BQ3-M3 Cathode Anode SMB PRODUCT SUMMARY Package SMB I F(AV) 1. A V R 3 V V F at I F.42 V I RM max. 15 ma at 125 C T J max. 15 C Diode variation Single die
More informationAutomotive P-Channel 60 V (D-S) 175 C MOSFET
Automotive P-Channel 6 V (D-S) 75 C MOSFET SQ36AEES PRODUCT SUMMARY V DS (V) -6 R DS(on) () at V GS = - V 7 R DS(on) () at V GS = -4.5 V.3 I D (A) -.9 Configuration Single D 3 SOT-3 (TO-36) G Top View
More informationSilicon NPN Phototransistor
Silicon NPN Phototransistor DESCRIPTION 7 is a silicon NPN phototransistor with high radiant sensitivity in black, T-1¾ plastic package with base terminal and daylight blocking filter. Filter bandwidth
More informationHigh Performance Schottky Rectifier, 1 A
High Performance Schottky Rectifier, A VS-MQNPbF Cathode Anode DO-24AC (SMA) PRODUCT SUMMARY Package DO-24AC (SMA) I F(AV) A V R V V F at I F.78 V I RM ma at 25 C T J max. 5 C Diode variation Single die
More informationOptocoupler, Photodarlington Output, Dual Channel, SOIC-8 Package
Optocoupler, Photodarlington Output, i179042 DESCRIPTION A1 C 2 A3 C4 8 C 7E 6C 5E The ILD233T is a high current transfer ratio (CTR) optocoupler. It has a gallium arsenide infrared LED emitter and silicon
More informationPI5A100. Precision, Wide-Bandwidth Quad SPDT Analog Switch. Description. Features. Block Diagram, Pin Configuration. Applications.
Precision, Wide-Bandwidth Quad SPDT Analog Switch Features Single Supply Operation (+2V to +6V) Rail-to-Rail Analog Signal Dynamic Range Low On-Resistance (6Ω typ with 5V supply) Minimizes Distortion and
More informationCMOS Low Voltage 2.5 Ω Dual SPDT Switch ADG736L
CMO Low Voltage 2.5 Ω ual PT witch AG736L FEATURE 1.8 V to 5.5 V single supply 2.5 Ω (typical) on resistance Low on-resistance flatness Guaranteed leakage performance over 40 C to +85 C 3 db bandwidth
More informationOptocoupler, Phototransistor Output, AC Input
Optocoupler, Phototransistor Output, AC Input DESCRIPTION The SFH62A (DIP) and SFH626 (SMD) feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have
More informationHigh Power Infrared Emitting Diode, 940 nm, GaAlAs, MQW
High Power Infrared Emitting Diode, 94 nm, GaAlAs, MQW DESCRIPTION 94 8389 is an infrared, 94 nm emitting diode in GaAlAs multi quantum well (MQW) technology with high radiant power and high speed molded
More informationPower MOSFET FEATURES. IRF520PbF SiHF520-E3 IRF520 SiHF520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20
Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) ( ) = 0.7 Q g (Max.) (nc) 16 Q gs (nc) 4.4 Q gd (nc) 7.7 Configuration Single TO0AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G D S NChannel MOSFET
More informationSilicon PIN Photodiode
VEMD940F Silicon PIN Photodiode DESCRIPTION VEMD940F is a high speed and high sensitive PIN photodiode in a miniature side looking, surface mount package (SMD) with daylight blocking filter. Filter is
More informationOptocoupler, Phototransistor Output, with Base Connection
Optocoupler, Phototransistor Output, with Base Connection FEATURES i794-4 DESCRIPTION This datasheet presents five families of Vishay industry standard single channel phototransistor couplers. These families
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION 94 8583 BPW34 is a PIN photodiode with high speed and high radiant sensitivity in miniature, flat, top view, clear plastic package. It is sensitive to visible and near
More informationLoad Switch with Level-Shift
Load Switch with Level-Shift PRODUCT SUMMARY V IN (V DS2 ) (V) R DS(on) (Ω) I D (A).5 to 2 DESCRIPTION.54 at V IN = 4.5 V 3.9.77 at V IN = 2.5 V 3.2.6 at V IN =.8 V 2.8.65 at V IN =.5 V 2.2 The includes
More informationSchottky Rectifier, 100 A
Schottky Rectifier, A VS-BGQ Cathode Anode PowerTab PRODUCT SUMMARY Package PowerTab I F(AV) A V R V V F at I F 0.82 V I RM 180 ma at 125 C T J max. 175 C Diode variation Single die E AS 9 mj FEATURES
More informationAmbient Light Sensor
TEPT56 Ambient Light Sensor DESCRIPTION 94 839 TEPT56 ambient light sensor is a silicon NPN epitaxial planar phototransistor in a T-1¾ package. It is sensitive to visible light much like the human eye
More informationData Sheet June 13, 2006. Features TEMP.
G48, G49 ata Sheet FN3283.8 Single 8-Channel/ifferential 4-Channel, CMOS Analog Multiplexers The G48 Single 8-Channel, and G49 ifferential 4-Channel monolithic CMOS analog multiplexers are drop-in replacements
More informationDescription. For Fairchild s definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.
FSA2357 Low R ON 3:1 Analog Switch Features 10µA Maximum I CCT Current Over an Expanded Control Voltage Range: V IN=2.6V, V CC=4.5V On Capacitance (C ON): 70pF Typical 0.55Ω Typical On Resistance (R ON)
More informationAluminum Electrolytic Capacitors Power Eurodin Printed Wiring
Aluminum Electrolytic Capacitors Power Eurodin Printed Wiring 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 00 0 Nominal case size (Ø D x L in mm) x 0 to 0 x 00 Rated capacitance range 0 μf to
More informationSchottky Rectifier, 1.0 A
Schottky Rectifier, 1.0 A VS-BQ040-M3 Cathode Anode PRODUCT SUMMARY Package SMB I F(AV) 1.0 A V R 40 V V F at I F 0.38 V I RM 9 ma at 125 C T J max. 150 C Diode variation Single die E AS 3.0 mj FEATURES
More informationOptocoupler, Phototransistor Output, with Base Connection
CNY7 Optocoupler, Phototransistor FEATURES Isolation test voltage 5 V RMS A 6 B Long term stability i79 C NC 5 C E Industry standard dual-in-line package Lead (Pb-free component Component in accordance
More informationPower MOSFET FEATURES. IRF540PbF SiHF540-E3 IRF540 SiHF540. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20
Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) ( ) = 0.077 Q g (Max.) (nc) 72 Q gs (nc) 11 Q gd (nc) 32 Configuration Single TO220AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G D S NChannel MOSFET
More informationIR Receiver Module for Light Barrier Systems
Not for New Design - Alternative Available: New TSSP4038 (#82458) www.vishay.com IR Receiver Module for Light Barrier Systems TSOP4038 2 3 MECHANICAL DATA Pinning: = OUT, 2 = GND., 3 = V S 6672 FEATURES
More informationAluminum Electrolytic Capacitors Power Economic Printed Wiring
Aluminum Electrolytic Capacitors Power Economic Printed Wiring 0/0 PECPW 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION high ripple current 0/0 PECPW long life 0 C Nominal case size (Ø D x L in mm) Rated
More informationPower MOSFET FEATURES. IRF9640PbF SiHF9640-E3 IRF9640 SiHF9640
Power MOSFET PRODUCT SUMMARY V DS (V) 200 R DS(on) (Ω) = 10 V 0.50 Q g (Max.) (nc) 44 Q gs (nc) 7.1 Q gd (nc) 27 Configuration Single TO220AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G S D
More informationPower MOSFET. IRF9520PbF SiHF9520-E3 IRF9520 SiHF9520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS - 100 V Gate-Source Voltage V GS ± 20
Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) ( ) = 10 V 0.60 Q g (Max.) (nc) 18 Q gs (nc) 3.0 Q gd (nc) 9.0 Configuration Single TO220AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G S D PChannel
More informationCMOS 1.8 V to 5.5 V, 2.5 2:1 Mux/SPDT Switch in SOT-23 ADG719
a FEATURE 1.8 V to 5.5 ingle upply 4 (Max) On Resistance.75 (Typ) On Resistance Flatness Automotive Temperature Range: 4 C to +125 C 3 db Bandwidth > 2 MHz Rail-to-Rail Operation 6-Lead OT-23 Package and
More informationCMOS 1.8 V to 5.5 V, 2.5 Ω 2:1 Mux/SPDT Switch in SOT-23 ADG719
CMOS 1.8 V to 5.5 V, 2.5 Ω 2:1 Mux/SPT Switch in SOT-23 AG719 FEATURES 1.8 V to 5.5 V single supply 4 Ω (max) on resistance 0.75 Ω (typ) on resistance flatness 3 db bandwidth > 200 MHz Rail-to-rail operation
More informationHigh Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW
High Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW DESCRIPTION is an infrared, 940 nm side looking emitting diode in GaAlAs multi quantum well (MQW) technology with high radiant power and high speed,
More informationSurface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
More informationThick Film Resistor Networks, Dual-In-Line, Molded DIP
Thick Film Resistor Networks, Dual-In-Line, Molded DIP FEATURES Isolated, bussed, and dual terminator schematics available 0.160" (4.06 mm) maximum seated height and rugged, molded case construction Thick
More informationP6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.com FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More informationImproved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers
9-4729; Rev 6; 3/ Improved, 6-Channel/ual 8-Channel, General escription Maxim s redesigned G46 and G47 CMOS analog multiplexers now feature guaranteed matching between channels (8Ω, max) and flatness over
More informationHigh Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs
TSAL51 High Power Infrared Emitting Diode, 94 nm, GaAlAs/GaAs DESCRIPTION 96 1155 TSAL51 is an infrared, 94 nm emitting diode in GaAlAs/GaAs technology with high radiant power, molded in a blue-gray plastic
More informationAluminum Electrolytic Capacitors Axial Miniature, Long-Life
Aluminum Electrolytic Capacitors Axial Miniature, Long-Life 38 AML 0 ASM smaller dimensions Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) 6.3 x.7 to 0 x 5 VALUE 0 x 30 to x 38
More informationDual P-Channel 2.5 V (G-S) MOSFET
Si593DC Dual P-Channel.5 V (G-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).55 at V GS = -.5 V ±.9 -.8 at V GS = - 3.6 V ±.7.6 at V GS = -.5 V ±. FEATURES Halogen-free According to IEC 69-- Definition
More informationHigh Speed Infrared Emitting Diode, 870 nm, GaAlAs Double Hetero
TSFF55 High Speed Infrared Emitting Diode, 87 nm, GaAlAs Double Hetero 26 DESCRIPTION TSFF55 is an infrared, 87 nm emitting diode in GaAlAs double hetero (DH) technology with high radiant power and high
More informationReflective Optical Sensor with Transistor Output
TCRT5000, TCRT5000L Reflective Optical Sensor with Transistor Output FEATURES Package type: leaded Detector type: phototransistor Dimensions (L x W x H in mm): 10.2 x 5.8 x 7 Peak operating distance: 2.5
More informationOptocoupler, Phototransistor Output, with Base Connection in SOIC-8 Package
Optocoupler, Phototransistor Output, FEATURES High BV CEO, 70 V Vishay Semiconductors i79002 A K NC NC 2 3 4 8 7 6 5 NC B C E Isolation test voltage, 4000 V RMS Industry standard SOIC-8A surface mountable
More informationQuad, Rail-to-Rail, Fault-Protected, SPST Analog Switches
19-2418; Rev ; 4/2 Quad, Rail-to-Rail, Fault-Protected, General Description The are quad, single-pole/single-throw (SPST), fault-protected analog switches. They are pin compatible with the industry-standard
More informationLTC1390 8-Channel Analog Multiplexer with Serial Interface U DESCRIPTIO
FEATRES -Wire Serial Digital Interface Data Retransmission Allows Series Connection with Serial A/D Converters Single V to ±V Supply Operation Analog Inputs May Extend to Supply Rails Low Charge Injection
More information2.5 A Output Current IGBT and MOSFET Driver
VO. A Output Current IGBT and MOSFET Driver 9 DESCRIPTION NC A C NC _ The VO consists of a LED optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for
More informationHigh Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs
TSAL64 High Power Infrared Emitting Diode, 94 nm, GaAlAs/GaAs DESCRIPTION 94 8389 TSAL64 is an infrared, 94 nm emitting diode in GaAlAs/GaAs technology with high radiant power molded in a blue-gray plastic
More informationPower MOSFET FEATURES. IRF740PbF SiHF740-E3 IRF740 SiHF740. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 400 V Gate-Source Voltage V GS ± 20
Power MOSFET PRODUCT SUMMARY (V) 400 R DS(on) (Ω) = 0.55 Q g (Max.) (nc) 63 Q gs (nc) 9.0 Q gd (nc) 3 Configuration Single FEATURES Dynamic dv/dt Rating Repetitive Avalanche Rated Fast Switching Ease of
More informationDG3157. High-Speed, Low R ON, SPDT Analog Switch. Vishay Siliconix. (2:1 Multiplexer/Demultiplexer Bus Switch) DESCRIPTION FEATURES
High-peed, Low R ON, PDT nalog witch (2:1 Multiplexer/Demultiplexer Bus witch) DG3157 DECRIPTION The DG3157 is a high-speed single-pole double-throw, low power, TTL-Compatible bus switch. Using sub-micro
More informationN-Channel 80-V (D-S) MOSFET
Si785P N-Channel 80-V (-S) MOSFET PROUCT SUMMARY V S (V) R S(on) (Ω) I (A) 80 8 7 6 0.065 at V GS = 0 V.5 0.0 at V GS = 6 V 0.9 PowerPAK SO-8 5 S 6.5 mm 5.5 mm Ordering Information: Bottom View S S 3 G
More informationAC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC / Class Y1, 500 V AC
4L Series AC Line Rated Ceramic Disc Capacitors Class X, 76 V AC / Class Y, 5 V AC FEATURES Complies with IEC 6384-4, 4 th edition High reliability Radial leads High capacitance up to nf Singlelayer AC
More informationPreamplifier Circuit for IR Remote Control
Preamplifier Circuit for IR Remote Control 22906 FEATURES Carrier-out-function: carrier frequency and burst length accurately correspond to the input signal AC coupled response from 20 khz to 60 khz; all
More information50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High power to size ratio Non inductive element Material
More informationElectrical Double Layer Energy Storage Capacitors Power and Energy Versions
Electrical Double Layer Energy Storage Capacitors Power and Energy Versions FEATURES Polarized energy storage capacitor with high capacity and energy density Energy version with high stability available
More informationSuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal
SuperTan Extended () Capacitors, Wet Tantalum Capacitors with Hermetic Seal FEATURES SuperTan Extended () represents a major breakthrough in wet tantalum capacitor Available technology. Its unique cathode
More informationSchottky Rectifier, 1 A
Schottky Rectifier, 1 A BQPbF FEATURES SMB Cathode Anode Small foot print, surface mountable Low forward voltage drop High frequency operation Available RoHS* COMPLIANT Guard ring for enhanced ruggedness
More informationMetal Film Resistors, Military, MIL-R-10509 Qualified, Precision, Type RN and MIL-PRF-22684 Qualified, Type RL
Metal Film Resistors, Military, Qualified, Precision, Type RN and Qualified, Type RL FEATURES Very low noise (- 40 db) Very low voltage coefficient (5 ppm/v) Controlled temperature coefficient Flame retardant
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES
More information