Metal (Oxide) Film Fusing Resistors

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Metal (Oxide) Film Fusing Resistors"

Transcription

1 Metal (Oxide) Film Fusing Resistors Type: ERQH (Flame retardative hermetic type) Type: ERQC (Flameproof bath-tub type, Axial leads) n Features l Accurate Fusing Characteristic Accurate fusing characteristic can be applied to safety circuit in wide range of electronic equipment l Flameproof Safety flameproof construction in a ceramic tube or case l Hot Spot Temperature The temperature of resistor surface shall not exceed 6 ûc ( ûf) l Uniform Quality Reliable An exclusive automated process-developed, built, and used only by Matsushita and severe quality control system results in uniform quality and consistent performance in reliability l High Dielectric Withstanding Voltage Resistor may withstand a high potential up to V n Construction Flame-retardant, hermetically sealed Metal (oxide) film ERQ-H type Lead wire Spiraling turns Marking Ceramic core Ceramic tube Fusing glass Flame-proof epoxy resin End cap Sealing washer ER

2 n Explanation of Part Numbers E R Q C J Product Code Metal (Oxide) Film Fusing Resistors Power Rating at C amb..5 W W W 3 3W Special Feature H C Hermetic (.5 W) Bath-tub Axial leads Resistance Tolerance J ± 5% K ± % Resistance Value The first two digits are significant figures of resistance and the third one denotes number of zeros following. Decimal point is expressed by R as.5= R5. Suffix for Packaging and/or Cut & Formed Leads Nil Std.bulk packing V Axial taped & box P P type cut & formed PáááS type cut & PáááS formed The above example shows a standard bath-tub type Metal (Oxide) Film Fusing Resistors, W power rating, resistance value of W, tolerance of 5 %, and package of standard bulk packing. n Ratings Type Power Dielectric Maximum Resistance Resistance Standard Rating Withstanding Overload Tolerance Range (W) Resistance at C Voltage (%) Values (W) Voltage(V) min. max. ERQH.5 3 times of RCWV () AC K (±)..8 E J (± 5) 3.9 k E4 ERQC AC K (±).33.8 E J (± 5) k E4 ERQC.5 times of K (±).33.8 E AC RCWV J (± 5) k E4 ERQ3C 3 AC K (±).33.8 E J (± 5) 3.3 k E4 () Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=Ã Power Rating Resistance Value Marking Method on Body Stamp ±5 T.C.R. Mass [ -6 /ûc (Weight) (ppm/ûc)] [g/pc.] Maximum Open Circuit Voltage Refering to the maximum value of the voltage applied between terminals of the resistor when the resistor is opened in an electric circuit, it is defined by type and resistance. Please stay within the specified voltage. (Please refer to ER5 page) Power Derating Curve For resistors operated in ambient temperatures above ûc, power rating shall be derated in accordance with the right figure. Rated Load (%) Ð3 C C 8 6 C type 4 H type 5 C Ð6 Ð4 Ð Ambient Temperature ( C) ER

3 n Explanation of marking Type H Black stamp Type C Red stamp Symbol Rated power /W 6WJ 8 Manufacturing number Tolerance Rated power, resistance value and Tolerance Symbol 3.3WJ Q Resistance value Date code (Year,Month,Week) Code for fuse resistors Date code (Year,Month,Week) n Dimensions in mm (not to scale) Dimensions (mm) Type L fd k fd A Type ERQH 3 +3 Ð (mm) fd ERQH. ± ±. 8.5 ±3..65 ±.5 Ñ fd ERQC 3. ±. Ñ 5. ±4..65 ± ±. l L l ERQC 8. ±. Ñ 5. ±4..8 ± ±. Type ERQC fd ERQ3C. ±. Ñ 3. ±4..8 ± ±. l L l A A n Cut & Formed Type Type ÒPÓ S L h fd 3 max. f.65±.5 h.8.±. Part No. L fd S h h ERQHP. ±.5 f5.3 ±..5 ± ±.5 4. ±. Unit: mm Type ÒPáááSÓ S A L h h A 3 max. fd W W Unit: mm Part No. L S fd A h h W W ERQCPS ( W) 3. ±.. ±..65 ±. 5.5 ±. 6. ±.5 4. ±.. ±..8 ERQCPS ( W) 8. ±. 5. ±..8 ±. 6.4 ±. 5.8 ±.5 4. ±..4 ±. ER

4 n Axial Taping Specifications Type ERQH l 5.± Ð l.±.5 l 3 +3 Ð D/ 95± Standard quantity (per box) pcs. 6.±. D 5 + Ð 35±3 l-l <. All dimensions are in millimeters n Pakaging Methods Contact factory pakaging methods. (Type ERQC) n Performance Specifications Characteristics Specifications Test Methods Flame-Retardancy Not have any specimens which burn with flaming combustion time for more than seconds after each application of the test flame. The test flame is placed to remain for 5 seconds and removed for 5 seconds. The test shall be repeated until resistor has been subjected to 5 applications of the test flame. Fusing Characteristics When resistors are tested using the specified circuit, the resistors shall meet the requirements specified respectively. (Refer to ER4 page) Tested on individual specified circuit, using stable power supply. Maximum open circuit voltage When resistors are tested using the specified circuit, the resistors shall meet the requirements specified respectively. (Refer to ER5 page) Tested on individual specified circuit. ER3

5 n Fusing characteristics for ERQH, C type Resistance value ERQH type Multiple of the power rating (times) Metal (Oxide) Film to.8 (W) < 3 < 5 <. to 4.3 (W) < 45 < 5 < < 4. to 6 (W) < 8 < 9 < 45 < 5 < < 8 to 4 (W) < 5 < < 6 < 45 < 5 < < 5 to (W) < 45 < 5 < to 6 (W) < 45 < 3 < < 68 to 3.9 k (W) < 8 < 9 < 45 < 5 (unit : sec) (unit : sec) ERQC type Multiple of the power rating (times) to.9 (W) < 3 < 8 < 4 < <. to 3.9 (W) < 9 < 45 < 5 < < 4.3 to 6 (W) < 9 < 6 < 3 < < < Resistance value 8 to 4 (W) < 6 < 3 < 5 < < < 5 to 8 (W) < 9 < < 5 < to 6 (W) < 6 < < < 68 to k (W) < 9 < 6 < < < (unit : sec) ERQC type Multiple of the power rating (times) to.9 (W) < 9 < 3 < 5 <. to 3.9 (W) < 9 < 45 < < 5 < 4.3 to 3 (W) < 45 < 3 < < < Resistance value 33 to 4 (W) < 45 < 3 < < < < 5 to 8 (W) < < 6 < < < to 6 (W) < 9 < 3 < < < 68 to k (W) < 6 < 3 < < < < (unit : sec) Multiple of the power rating (times) ERQ3C type to.9 (W) < 4 < 9 < 45 <. to 3.9 (W) < 4 < 9 < < to (W) < 3 < < 6 < < 5 < 5 Resistance value to 9 (W) < < 6 < 3 < 5 < 5 < 5 to (W) < 8 < 9 < 3 < < 5 to 3.3 k (W) < 9 < 6 < < 5 < 5 ER4

6 n Maximum open circuit voltage for ERQH, C type Maximum open circuit voltage Referting to the maximum value of the voltage applied between terminals of the resistor when the resistor is opened in an electric circuit, it is defined by type and resistance. Please stay within the specified voltage. Shall be confirmed carefully in actual circuit before use. ERQH, C type Testing circuit ERQC type ERQH type Maximum open circuit voltage (V) Maximum open circuit voltage (V).. Resistance value (Ω) Resistance value (Ω) ERQC type ERQ3C type Maximum open circuit voltage (V) Maximum open circuit voltage (V).. Resistance value (Ω) Resistance value (Ω) ER5

7 Cautions for Safety The following are precautions for individual products. Please also refer to the precautions common to Fixed Resistors shown on page ER3 of this catalog.. Checking the fusing conditions ) Fusing characteristics differ depending on the type, shape, and resistance. Check the fusing conditions before selecting the type of Metal (Oxide) Film Fusing Resistors (hereafter called the Fusing Resistors) to be used. ) Use the Fusing Resistors under the maximum open circuit voltage. Otherwise, arcing may occur when a voltage much higher than the rated one is applied in the event of an abnormality in the circuit, or when a high voltage is applied after fusing.. Checking for pulse voltage, impact voltage, and transient voltage Make sure to evaluate and check the Fusing Resistors mounted on your product if they are to be mounted on a circuit that generates an impact voltage, or if there is a possibility that the transient phenomenon (significantly high voltage applied in a short time) may occur or that a pulse voltage with a high peak voltage may be applied. Make sure to consult our sales staff before using the Fusing Resistors under special conditions. 3. Conditions of use in a steady state Make sure that the load conditions have a sufficient allowance for the power derating curve. The characteristics of the Fusing Resistors are set by using a constant voltage circuit. (Data for Reference) n Pulse Characteristics (Usual) Pp (Vp) t T P P : Pulse limit power (W) V P : Pulse limit voltage (V) t : Pulse continuous time (s) T : Period (s) V R : Rated voltage (V) P : Rated power (W) R : Resistance value (W) V p max. : Max. pulse limit voltage (V) Withstand pulse limit power is calculated by the next method. P P =KáPáT/t V P = Ã KáPáRáT/t Reference to the right about a fixed number of V P max. Type K V p max. (V) ERQH.6 ERQC.3 ERQC.5 3 ERQ3C. 3 l T>(s) T=(s) l T/t> T/t= l P P <P P stands for P P (V P <V R V R stands for V P ) l Added voltage<v p max. l P P or V P is reference value Conditions : Pulse added time= h Resistance change=±5 % Room temperature ER6

8 n Fusing Characteristics (Constant Voltage Circuit) (Fusing specification is refer to ER4 page) ERQH ERQC W W kw W W kw Fusing time (s) Fusing time (s) ERQC ERQ3C W W kw W 3.3 k W Fusing time (s) Fusing time (s) n Hot Spot Temperature (for Reference) 5 Temperature rise ot (K) 4 3 CJ68 3CJR CJ68 Measuring point HJ ER8

9 Caution for Safety (Common precautions for Fixed Resistors) When using our products, no matter what sort of equipment they might be used for, be sure to make a written agreement on the specifications with us in advance. The design and specifications in this catalog are subject to change without prior notice. Do not use the products beyond the specifications described in this catalog. This catalog explains the quality and performance of the products as individual components. Before use, check and evaluate their operations when installed in your products. Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment where a defect in these products may cause the loss of human life or other significant damage, such as damage to vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment, electric heating appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment. ] Systems equipped with a protection circuit and a protection device ] Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault () Precautions for use These products are designed and manufactured for general purpose and standard use in general electronic equip ment (e.g. AV equipment, home electric appliances, office equipment, information and communication equipment) These products are not intended for use in the following special conditions. Before using the products, carefully check the effects on their quality and performance, and determine whether or not they can be used.. In liquid, such as water, oil, chemicals, or organic solvent. In direct sunlight, outdoors, or in dust 3. In salty air or air with a high concentration of corrosive gas, such as Cl, HS, NH3, SO, or NO 4. In an environment where strong static electricity or electromagnetic waves exist 5. In an environment where these products cause dew condensation 6. Sealing or coating of these products or a printed circuit board on which these products are mounted, with resin or other materials These products generate Joule heat when energized. Carefully position these products so that their heat will not affect the other components. Carefully position these products so that their temperatures will not exceed the category temperature range due to the effects of neighboring heat-generating components. Do not mount or place heat-generating components or inflammables, such as vinyl-coated wires, near these products. Note that non-cleaning solder, halogen-based highly active flux, or water-soluble flux may deteriorate the perfor mance or reliability of the products. Carefully select a flux cleaning agent for use after soldering. An unsuitable agent may deteriorate the performance or reliability. In particular, when using water or a water-soluble cleaning agent, be careful not to leave water residues. Otherwise, the insulation performance may be deteriorated. () Precautions for storage The performance of these products, including the solderability, is guaranteed for a year from the date of arrival at your company, provided that they remain packed as they were when delivered and stored at a temperature of 5 C to 35 C and a relative humidity of 45 % to 85 %. Even within the above guarantee periods, do not store these products in the following conditions. Otherwise, their electrical performance and/or solderability may be deteriorated, and the packaging materials (e.g. taping materials) may be deformed or deteriorated, resulting in mounting failures.. In salty air or in air with a high concentration of corrosive gas, such as Cl, HS, NH3, SO, or NO. In direct sunlight <Package markings> Package markings include the product number, quantity, and country of origin. In principle, the country of origin should be indicated in English. ER3

Coil type EMI Filters

Coil type EMI Filters oil type MI Filters (Digital Noise Filters) Type: K 8 case size, 6 A rated current (KA) and A rated current (K) High SD suppression with varistor and included coils asily discernible part number written

More information

Thick Film High Power Chip Resistors. Size W, W, /2W

Thick Film High Power Chip Resistors. Size W, W, /2W WF25P, WF20P, WF12P ±1%, ±5% 1Ω ~ 1MΩ Thick Film High Power Chip Resistors Size 2512 2W, 2010 1W, 1206 1/2W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF25-20-12P_V10

More information

Rectifying Diode RR264MM-400TF

Rectifying Diode RR264MM-400TF Rectifying Diode RR264MM-400TF Datasheet AEC-Q0 Qualified Series Dimensions (Unit : mm) Land size figure (Unit : mm) General Rectifying.6±0. 0. 0.± 0.05.2 0.85 Application 3.05 General rectification 2.6±0.

More information

SPECIFICATION FOR APPROVAL. Approved by

SPECIFICATION FOR APPROVAL. Approved by C O N F I D E N T I A L D O C U M E N T SPECIFICATION FOR APPROVAL CONRAD Description : Royalohm Part no.: 0402WGxxxxxTCE (RMC 1/16W (0402) +/- 1%, 5% & Jumper) 0603SAxxxxxT5E (RMC 1/10W-S (0603) +/- 1%,

More information

Linear Regulator Application Information

Linear Regulator Application Information Linear Regulator Application Information IC Product Name Topology LDO Linear Regulator Type Voltage source Input Output 1 4.0V to 26.5V 3.0V, 1A *1 2 4.3V to 26.5V 3.3V, 1A *1 3 6.0V to 26.5V 5.0V, 1A

More information

WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402

WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402 WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 10 ASC_WR_V23 APR.- 2015

More information

Zener diode GDZ7.5 GDZ7.5. Diodes. Rev.C 1/4. Dimensions (Unit : mm) Applications Constant voltage control

Zener diode GDZ7.5 GDZ7.5. Diodes. Rev.C 1/4. Dimensions (Unit : mm) Applications Constant voltage control Zener diode Applications Constant voltage control Dimensions (Unit : mm) Features 1) 2-pin ultra mini-mold type for high-density mounting(gmd2) 2) High reliability. 3) Can be mounted automatically,using

More information

Choosing the right Passives Device FIXED RESISTORS SENSING SMD / LEADED METAL FILM METAL FILM METAL FILM NTC / PTC HUMIDITY

Choosing the right Passives Device FIXED RESISTORS SENSING SMD / LEADED METAL FILM METAL FILM METAL FILM NTC / PTC HUMIDITY Sensing Resistors Selection Guide Choosing the right Passives Device FIXED RESISTORS SENSING SMD / LEADED SMD LEADED ELEMENT ELEMENT METAL FILM METAL FILM METAL FILM NTC / PTC MOISTURE / HUMIDITY NTC PTC

More information

WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors

WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxX_V12 Nov.- 2011

More information

DRAFT SPECIFICATION. Description: CRGH Series High Power Thick Film Chip Resistors. Product Type: (Resistance range: 1.0Ω ~ 10MΩ)

DRAFT SPECIFICATION. Description: CRGH Series High Power Thick Film Chip Resistors. Product Type: (Resistance range: 1.0Ω ~ 10MΩ) DRAFT SPECIFICATION Description: CRGH Series Product Type: (Resistance range: 1.0Ω ~ 10MΩ) CRGH0603_XXX (CRGH0603 1/5W +/- 1% & 5% Taped) CRGH0805_XXX (CRGH0805 1/3W +/- 1% & 5% Taped) CRGH1206_XXX (CRGH1206

More information

Ultra low ohmic Metal plate / High power type Shunt Resistors

Ultra low ohmic Metal plate / High power type Shunt Resistors Ultra low ohmic Metal plate / High power type Shunt Resistors PSR Series Features 1) High power class up to 4 to 5W. 2) The lineup of ultra-low resistance value : correspondence from 0.2m 3) Excellent

More information

Thick film rectangular

Thick film rectangular Thick film rectangular (126 size: 1 / 4W) Features 1) Power rating of 1 / 4W 2) Highly reliable chip resistor Ruthenium oxide dielectric offers superior resistance to the elements. 3) Electrodes not corroded

More information

Power chip resistor size 2512 PRC221 5%; 2% FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability.

Power chip resistor size 2512 PRC221 5%; 2% FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability. FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability. APPLICATIONS Power supplies Printers Computers Battery chargers Automotive Converters CD-ROM. QUICK

More information

Product code Style Construction Inductance Packaging. Core. Core Terminal. Case. D Omission. Terminal Core. Terminal board

Product code Style Construction Inductance Packaging. Core. Core Terminal. Case. D Omission. Terminal Core. Terminal board Choke Coils Series : Pin terminal Type : 09D, 11D, 12D, 16B, 18B, E, 12E, 15E, 18E Type 09D Type 11D Type 12D Pin terminal inductors featuring small size and high performance Features High - µ and High

More information

Metal Film MELF Resistors

Metal Film MELF Resistors FEATURES SURFACE MOUNT IN SIZES 0102 (0805), 0204 (1406) AND 0207 (2410) AVAILABLE IN PRECISION TOLERANCE AND TC (TO ±0.1% TOL. AND ±10PPM TC) ALL SIZES ARE AVAILABLE IN TAPE/REEL FOR AUTOMATIC MOUNTING

More information

Thin Film High Precision Chip Resistors

Thin Film High Precision Chip Resistors Thin Film High Precision Chip Resistors WF Series Size 252, 200, 20, 206, 0805, 0603, 0402, 020 Tolerance ±%, ±0.5%, ±0.25%, ±0.%, ±0.05% TCR ±50ppm, ±25ppm, ±5ppm, ±0ppm, ±5ppm RoHS Compliant *Contents

More information

High-ohmic/high-voltage resistors

High-ohmic/high-voltage resistors FEATURES High pulse loading capability Small size. APPLICATIONS Where high resistance, high stability and high reliability at high voltage are required High humidity environment White goods Power supplies.

More information

Rectifier Diode RR2L6SDD

Rectifier Diode RR2L6SDD Rectifier Diode RRL6SDD Datasheet AEC-Q0 Qualified Series Dimensions (Unit : mm) Land size figure (Unit : mm) Standard Rectifier.6±0..0.0 Application General rectification 8 4.5±0..±0.3 0.±0.0 0. 5.0±0.3

More information

TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 1206, 0805, 0603

TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 1206, 0805, 0603 WF2Q, WF08Q, WF06Q ±%, ±0.5%, ±0.25%, ±0.%, ±0.05% TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 206, 0805, 0603 *Contents in this sheet are subject to change without

More information

DATA SHEET THIN FILM CHIP RESISTORS High precision - high stability RT series 0.05% TO 1%, TC 10 TO 50 sizes 0402/0603/0805/1206/ 1210/2010/2512

DATA SHEET THIN FILM CHIP RESISTORS High precision - high stability RT series 0.05% TO 1%, TC 10 TO 50 sizes 0402/0603/0805/1206/ 1210/2010/2512 DATA SHEET THIN FILM CHIP RESISTORS High precision - high stability series 0.05% TO 1%, TC TO 50 sizes 0402/0603/0805/1206/ 12/20/2512 RoHS compliant Product specification Product specification 2 SCOPE

More information

High Power Thick Film Chip Resistor 2512

High Power Thick Film Chip Resistor 2512 Specifications: Type : MCHP12 Power Rating at 70 C : 2W Working Voltage : 250V Max. Overload Voltage : 500V Max. Dielectric Withstanding Voltage : 500V Temperature Range : -55 C to +155 C Ambient Temperature

More information

DATA SHEET HIGH POWER CHIP RESISTORS RC high power series 5%, 1% sizes 0603/0805/1206/2512. RoHS compliant & Halogen free

DATA SHEET HIGH POWER CHIP RESISTORS RC high power series 5%, 1% sizes 0603/0805/1206/2512. RoHS compliant & Halogen free DATA SHEET HIGH POWER CHIP RESISTORS RC high power series 5%, 1% sizes 0603/005/1206/2512 RoHS compliant & Halogen free Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE

More information

Metallized Polypropylene Film Capacitor AC Filtering Radial Type

Metallized Polypropylene Film Capacitor AC Filtering Radial Type Metallized Polypropylene Film Capacitor AC Filtering Radial Type FEATURES High peak current capabilities Long lifetime Material categorization: for definitions of compliance please see www.vishay.com/doc?9991

More information

SIL Resistor Network. Resistors. Electrical. Environmental. L Series. Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant

SIL Resistor Network. Resistors. Electrical. Environmental. L Series. Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant Resistors SIL Resistor Network Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2) Electrical Standard Resistance

More information

Metallized polyester film capacitors MKT 370/371/372/373

Metallized polyester film capacitors MKT 370/371/372/373 Metallized polyester film capacitors MKT 370/37/372/373 MKT RADIAL POTTED CAPACITORS PITCH /7.///22./27. mm 2222 370 2222 37 2222 372 2222 373 CBA Fig. Simplified outlines. FEATURES Low-inductive wound

More information

ISA-PLAN // Precision resistors. SMT // Size Features

ISA-PLAN // Precision resistors. SMT // Size Features Features 5 W power rating at 05 C Constant current up to 35 A (4 mohm) excellent long-term stability High pulse power rating Mounting: Reflow-, and IR-soldering AEC-Q200 qualified rohs 20/65/EU compliant

More information

Rectifier Diode 1SR154-400

Rectifier Diode 1SR154-400 5.3±..5 9.5±. 5.5±.5 2±.2.75±. Rectifier Diode SR54-4 Application Dimensions (Unit : mm) Land size figure (Unit : mm) General Rectification 2. 2. Features ) Small power mold type (PMDS) PMDS 4.2 2) High

More information

Capacitance Cap. Tol. Suffix construction. Rated voltage

Capacitance Cap. Tol. Suffix construction. Rated voltage Metallized Polypropylene Film Capacitors Type:ECWFE Plastic Film Capacitors Non-inductive construction using metalized Polypropylene film with flame retardant plastic case. Features Small size Excellent

More information

DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0402 5%, 1% RoHS compliant & Halogen Free

DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0402 5%, 1% RoHS compliant & Halogen Free DATA SHEET GENERAL PURPOSE CHIP RESISTORS 5%, 1% RoHS compliant & Halogen Free Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification describes series chip

More information

Pulse Withstanding Thick Film Chip Resistor-SMDP Series. official distributor of

Pulse Withstanding Thick Film Chip Resistor-SMDP Series. official distributor of Product: Pulse Withstanding Thick Film Chip Resistor-SMDP Series Size: /// official distributor of Pulse Withstanding Thick Film Chip Resistor-SMDP Series 1. Scope -This specification applies to ~ sizes

More information

DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC_L series ±0.1%, ±0.5%, ±1%, ±5% Sizes 0075/0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512

DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC_L series ±0.1%, ±0.5%, ±1%, ±5% Sizes 0075/0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512 Product specification January 22, 2016 V.4 DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC_L series ±0.1%, ±0.5%, ±1%, ±5% Sizes 0075/00/0201/0402/0603/0805/ 1206/12/1218/20/2512 RoHS compliant & Halogen

More information

High-ohmic/high-voltage resistors

High-ohmic/high-voltage resistors FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS

More information

Type RP73 Series. SMD High Power Precision Resistors. Key Features. Applications. Characteristics - Electrical - RP73 Series - Standard

Type RP73 Series. SMD High Power Precision Resistors. Key Features. Applications. Characteristics - Electrical - RP73 Series - Standard Key Features n High precision - tolerances down to 0.05% n Low TCR - down to 5ppm/ C n Stable high frequency performance n Operating temperature -55 C to +155 C n Increased power rating - up to 1.0W n

More information

Schottky Barrier Diode

Schottky Barrier Diode Data Sheet Schottky Barrier Diode RB2SM-3 Applications Dimensions (Unit : mm) Land size figure (Unit : mm) Small current rectification.8±..2±..8 Features )Ultra small mold type. (EMD2) 2)Low V F 3)High

More information

The following document contains information on Cypress products.

The following document contains information on Cypress products. The following document contains information on Cypress products. HANDLING PRECAUTIONS 1. Handling Precautions Any semiconductor devices have inherently a certain rate of failure. The possibility of failure

More information

Zener Diode UDZV series

Zener Diode UDZV series Zener Diode UDZV series Datasheet Application Dimensions (Unit : mm) Land size figure (Unit : mm) Constant voltage control.25±..±..5.9min. Features ) Compact,2-pin mini-mold type for high-density mounting.

More information

AC and Pulse Film Foil Capacitors KP Radial Potted Type

AC and Pulse Film Foil Capacitors KP Radial Potted Type AC and Pulse Film Foil Capacitors KP Radial Potted Type 0.5 L max. W max. Marking H max. FEATURES 5 mm lead pitch, supplied loose in box taped in ammopack or reel Material categorization: for definitions

More information

Zener Diode. Data Sheet EDZ5.6B C C C. 1/4 2011.05 - Rev.F. Applications Dimensions (Unit : mm) Land size figure (Unit : mm) Constant voltage control

Zener Diode. Data Sheet EDZ5.6B C C C. 1/4 2011.05 - Rev.F. Applications Dimensions (Unit : mm) Land size figure (Unit : mm) Constant voltage control Data Sheet Zener Diode EDZ5.6B Applications Dimensions (Unit : mm) Land size figure (Unit : mm) Constant voltage control 0.8±0.05 2±0.05 0.8 Features 1)2-pin ultra mini-mold type for high-density mounting

More information

Metal Film Resistors, Industrial, Precision

Metal Film Resistors, Industrial, Precision CMF Industrial Metal Film Resistors, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Excellent high frequency characteristics

More information

DC Film Capacitors MKT Axial Type

DC Film Capacitors MKT Axial Type MKT181 DC Film Capacitors MKT Axial Type FEATURES Supplied loose in box, taped on ammopack or reel Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 APPLICATIONS

More information

SMD High Power Precision Resistors

SMD High Power Precision Resistors Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications

More information

High Voltage Surge Metal Glaze Leaded Resistor

High Voltage Surge Metal Glaze Leaded Resistor High Voltage Surge Metal Glaze A metal glazed film is deposited on a high grade ceramic body. After that caps are applied to the rods and tinned electrolytic copper wires are welded to these end caps.

More information

Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications

Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications FEATURES AEC-Q200 qualified with PPAP available Available in 0402 to 1812 body size Three dielectric materials AgPd termination

More information

High Surge Axial Cemented Wirewound Resistors

High Surge Axial Cemented Wirewound Resistors High Surge Axial Cemented Wirewound Resistors FEATURES High voltage surge (up to 12 kv) withstanding capability Non flammable silicon cement coating High grade ceramic core Material categorization: for

More information

Thick Film Resistor Networks, Dual-In-Line, Molded DIP

Thick Film Resistor Networks, Dual-In-Line, Molded DIP Thick Film Resistor Networks, Dual-In-Line, Molded DIP FEATURES Isolated, bussed, and dual terminator schematics available 0.160" (4.06 mm) maximum seated height and rugged, molded case construction Thick

More information

50 W Power Resistor, Thick Film Technology, TO-220

50 W Power Resistor, Thick Film Technology, TO-220 50 W Power Resistor, Thick Film Technology, TO-220 FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High power to size ratio Non inductive element Material

More information

High Voltage Surge Resistor

High Voltage Surge Resistor High Voltage Surge Resistor A metal glazed film is deposited on a high grade ceramic body. After that caps are applied to the rods and tinned electrolytic copper wires are welded to these end caps. The

More information

DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512

DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512 DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/005/ 1206/1210/121/2010/2512 Product specification August 22, 2014 V.0 Product specification 2 SCOPE This specification

More information

Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC and 200 V DC

Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC and 200 V DC Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 5 V DC, 1 V DC and 2 V DC DESIGNING For more than 2 years Vitramon has supported the automotive industry

More information

Electrical Specifications. Dielectric Withstanding Voltage. Mechanical Specifications

Electrical Specifications. Dielectric Withstanding Voltage. Mechanical Specifications Features: General purpose resistor ideal for coercial/industrial applications Flame retardant coatings standard Flameproof version available as CFF Panasert available on selected sizes; contact factory

More information

Metal Film Resistors, Industrial, Precision

Metal Film Resistors, Industrial, Precision Metal Film Resistors, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Available Excellent high frequency characteristics Exceptionally

More information

High Ohmic/High Voltage Metal Glaze Leaded Resistors

High Ohmic/High Voltage Metal Glaze Leaded Resistors High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to

More information

DATA SHEET PART NO. : L-314YD REV : A / 4

DATA SHEET PART NO. : L-314YD REV : A / 4 PARA LIGHT ELECTRONICS CO., LTD. 4F, No.1, Lane 93, Chien Yi Road, Chung Ho City, Taipei, Taiwan, R.O.C. Tel: 886-2-2225-3733 Fax: 886-2-2225-4800 E-mail: para@para.com.tw http://www.para.com.tw DATA SHEET

More information

Automotive and Anti-Sulfuration Chip Resistor 0402

Automotive and Anti-Sulfuration Chip Resistor 0402 The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the

More information

DATA SHEET CHIP RESISTORS RT Series 1%; 0.5%; 0.25%; 0.1%

DATA SHEET CHIP RESISTORS RT Series 1%; 0.5%; 0.25%; 0.1% DATA SHEET CHIP RESISTORS Series 1%; 0.5%; 0.25%; 0.1% Product specification Supersedes Date of Sep. 30, 2003 ynsc004 ynsc015 ynsc002 ynsc007 2 SCOPE This specification describes series chip resistors

More information

DC Film Capacitors MKT Radial Potted Type

DC Film Capacitors MKT Radial Potted Type DC Film Capacitors MKT Radial Potted Type FEATURES 15 mm to 27.5 mm lead pitch. Supplied loose in box and taped on reel Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

More information

LAMP /T2C4-1NRB

LAMP /T2C4-1NRB Features Popular T-1 round package High luminous power Typical chromaticity coordinates x=0.29,y=0.28 according to CIE1931 Bulk, available taped on reel. ESD-withstand voltage: up to 4KV The product itself

More information

Surface Mount Fuses. 6125Size> High Inrush > S6125-H2-5.0A. Unit: mm

Surface Mount Fuses. 6125Size> High Inrush > S6125-H2-5.0A. Unit: mm Page: 1 of 6 General High Inrush withstand capability Wire-In-Air performance Wide range of current rating available 6.1mm 2.5mm square shape surface mount Higher temperature profiles -55 ~125 operating

More information

3. Terminal Shape P : PCB terminals FS: Surface-mounting terminals, short FL : Surface-mounting terminals, long

3. Terminal Shape P : PCB terminals FS: Surface-mounting terminals, short FL : Surface-mounting terminals, long Surfacemounting Relay Ultracompact and Slim DPDT Relay Suitable for highdensity mounting.(.7 mm (W). mm (L) 9 mm (H)). Dielectric strength of, VAC and an impulse withstand voltage of 2, V for 2 μs (conforms

More information

TLRK1100C(T11), TLRMK1100C(T11), TLSK1100C(T11), TLOK1100C(T11), TLYK1100C(T11)

TLRK1100C(T11), TLRMK1100C(T11), TLSK1100C(T11), TLOK1100C(T11), TLYK1100C(T11) TOSHIBA LED Lamps TL(RK,RMK,SK,OK,YK)C(T) TLRKC(T), TLRMKC(T), TLSKC(T), TLOKC(T), TLYKC(T) Panel Circuit Indicators Unit: mm Surface-mount devices.2 (L) mm 2.8 (W) mm.9 (H) mm Flat-top type InGaAlP LEDs

More information

EE-SX91. Meeting Customer Needs with Compact Sensors that Mount with M3 Screws

EE-SX91. Meeting Customer Needs with Compact Sensors that Mount with M3 Screws Compact Pre-wired Photomicrosensor with Built-in Amplifier (Non-modulated) CSM DS_E_7_2 Meeting Customer Needs with Compact Sensors that Mount with M Screws Both light-on and dark-on outputs provided.

More information

TQ SMD RELAYS TQ SMD LOW-PROFILE SURFACE-MOUNT RELAY FEATURES SPECIFICATIONS

TQ SMD RELAYS TQ SMD LOW-PROFILE SURFACE-MOUNT RELAY FEATURES SPECIFICATIONS LOW-PROFILE SURFACE-MOUNT RELAY RELAYS.55 5.6. FEATURES Low-profile: 6 mm.36 inch (Tape height: max. 6.5 mm.56 inch) Tape and reel package is available as standard packing style Surge withstand between

More information

High Stability Resistor Chips (< 0.25 % at Pn at 70 C during 1000 h) Thick Film Technology

High Stability Resistor Chips (< 0.25 % at Pn at 70 C during 1000 h) Thick Film Technology High Stability Resistor Chips (< 0.25 % at Pn at 70 C during 0 h) Thick Film Technology thick film resistor chips are specially designed to meet very stringent specifications in terms of reliability, stability

More information

Medium Voltage HRC FUSES. Catalogue sheet B30/06.03e

Medium Voltage HRC FUSES. Catalogue sheet B30/06.03e Medium Voltage HRC FUSES Catalogue sheet B30/06.03e 1. FEATURES High rupturing capacity Short circuit current limiting Low rated minimum breaking current (I min ) Low switching overvoltages (U m ) Can

More information

F50360 F Features. Applications

F50360 F Features. Applications Technical ZPower LED Data X10490 Sheet F50360 ZPower series is designed for high current operation and high flux output applications. ZPower LED's thermal management perform exceeds other power LED solutions.

More information

Metal Film Resistors, Non-Magnetic, Industrial, Precision

Metal Film Resistors, Non-Magnetic, Industrial, Precision Metal Film Resistors, Non-Magnetic, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Excellent high frequency characteristics

More information

Part Marking Instructions Chip Resistors

Part Marking Instructions Chip Resistors Chip Resistors Part Marking Instructions Part Marking Instructions Chip Resistors 1% Marking The nominal resistance is marked on the surface of the overcoating with the use of 4 digit markings. 0201 and

More information

Nichia STS-DA1-0774 <Cat.No.090427> SPECIFICATIONS FOR NICHIA UV NSHU591B MODEL : NICHIA CORPORATION

Nichia STS-DA1-0774 <Cat.No.090427> SPECIFICATIONS FOR NICHIA UV NSHU591B MODEL : NICHIA CORPORATION SPECIFICATIONS FOR NICHIA UV LED MODEL : NSHU591B 1.SPECIFICATIONS (1) Absolute Maximum Ratings (Ta=25 C) Item Symbol Absolute Maximum Rating Unit Forward Current IF 25 ma Pulse Forward Current IFP 80

More information

Metal, ceramic, plastic package products

Metal, ceramic, plastic package products Precautions Metal, ceramic, plastic package products This document describes general precautions for using Hamamatsu opto-semiconductors of metal, ceramic, and plastic packages (hereafter called the product

More information

Pulse Proof Thick Film Chip Resistors

Pulse Proof Thick Film Chip Resistors Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

More information

Precision Leaded Resistors

Precision Leaded Resistors FEATURES Approved according to CECC 40101-806 Advanced thin film technology Low TC: ± 15 to Precision tolerance of value: ± 0.1 % and ± 0.25 % Superior overall : class 0.05 Wide precision range: 10 Ω to

More information

Chip NTC Thermistor for temperature sensor and temperature compensation 0201 size

Chip NTC Thermistor for temperature sensor and temperature compensation 0201 size P 1 / 8 Chip NTC Thermistor for temperature sensor and temperature compensation 0201 size 1. Part Numbering (ex.) NC P 03 XH 103 F 05 RL Product ID Series Dimensions Temperature Resistance Resistance Individual

More information

High Ohmic (up to 68 MΩ)/ High Voltage (up to 10 kv) Resistors

High Ohmic (up to 68 MΩ)/ High Voltage (up to 10 kv) Resistors High Ohmic (up to 68 MΩ)/ A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to the end-caps.

More information

Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications

Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified

More information

3535HP UV LED. Brightek 3535HP Series. Table of contents. Features. Applications. Outline : 3.5*3.5*2.0mm 3.5*3.5*2.9mm.

3535HP UV LED. Brightek 3535HP Series. Table of contents. Features. Applications. Outline : 3.5*3.5*2.0mm 3.5*3.5*2.9mm. 3535HP UV LED Outline : 3.5*3.5*2.0mm 3.5*3.5*2.9mm High efficiency Good thermal dissipation & optical uniformity Table of contents Features--------------------------------------------------1 Product code

More information

G3PE-Three-phase. Solid State Contactors for Heaters

G3PE-Three-phase. Solid State Contactors for Heaters Solid State Contactors for Heaters Three-phase CSM_Three-phase_DS_E_4_1 Compact, Slim-profile SSRs with Heat Sinks. Solid State Contactors for Three-phase Heaters Reduced Installation Work with DIN Track

More information

DC Film Capacitors MKT Radial Potted Type

DC Film Capacitors MKT Radial Potted Type DC Film Capacitors MKT Radial Potted Type MKT80 FEATURES AEC-Q00 qualified (rev. D) for PCM. mm (for larger available components on request) High temperature capabilities, up to 0 C Capacitance up to 60

More information

Carbon Film Fixed Resistor Axial Leaded

Carbon Film Fixed Resistor Axial Leaded Features Automatically insertable High quality performance Non-Flame type available Cost effective and commonly used Too low or too high values can be supplied on case to case basis Performance Specification

More information

High Ohmic/High Voltage Metal Glaze Leaded Resistors

High Ohmic/High Voltage Metal Glaze Leaded Resistors High Ohmic/High Voltage Metal Glaze Leaded Resistors FEATURES Technology: Metal glaze A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive

More information

EE-SPY801/802. Photomicrosensors for detecting wafer-carrier mounting. Wafer-carrier Mounting Photomicrosensors. Ordering Information.

EE-SPY801/802. Photomicrosensors for detecting wafer-carrier mounting. Wafer-carrier Mounting Photomicrosensors. Ordering Information. Wafer-carrier Mounting Photomicrosensors EE-SPY1/ CSM_EE-SPY1 DS_E_3_ Photomicrosensors for detecting wafer-carrier mounting. The mounting position is set with a pedestal. The contact surface with the

More information

Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description

Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four

More information

Permissive Operating Current (25 C) (ma) Rated Electric Power (25 C) (mw)

Permissive Operating Current (25 C) (ma) Rated Electric Power (25 C) (mw) NTC Thermistors for Temperature Sensor Lead Type This product is a sensor type NTC Thermistor to be useful in the normal temperature range developed by the unique ceramic technology and the automatic assembly.

More information

EVERGREEN (C.P.) USA INC. TEL: (650) 952-8091 FAX: (650) 952-3629 E-MAIL: sales@evergreencpusa.com. SPECIFICATIONS Lithium Battery CR123A- 1700mAh

EVERGREEN (C.P.) USA INC. TEL: (650) 952-8091 FAX: (650) 952-3629 E-MAIL: sales@evergreencpusa.com. SPECIFICATIONS Lithium Battery CR123A- 1700mAh Voltage (V) Voltage (V) Voltage (V) EVERGREEN (C.P.) USA INC. SPECIFICATIONS Lithium Battery CR123A- 1700mAh Temperature characteristics(20ma) (mah) Pulse discharge characteristics Model CR123A Nominal

More information

High Ohmic/High Voltage Metal Glaze Leaded Resistors

High Ohmic/High Voltage Metal Glaze Leaded Resistors VR37 High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded

More information

Interference Suppression Film Capacitors MKP Radial Potted Type

Interference Suppression Film Capacitors MKP Radial Potted Type Interference Suppression Film Capacitors MKP Radial Potted Type FEATURES 7.5 mm to 27.5 mm lead pitch Supplied loose in box, taped on reel Material categorization: For definitions of compliance please

More information

Thick Film Chip Resistor 0603

Thick Film Chip Resistor 0603 Features Small size and light weight Suitable for both wave and reflow soldering Reduction of assembly costs Performance Specification Temperature Coefficient Short Time Overload Insulation Resistance

More information

Lead (Pb)-Bearing Thick Film, Rectangular Chip Resistors

Lead (Pb)-Bearing Thick Film, Rectangular Chip Resistors FEATURES Stability ΔR/R = 1 % for 00 h at 70 C Lead (Pb)-bearing termination plating on Ni barrier layer Metal glaze on high quality ceramic Halogen-free according to IEC 61249-2-21 definiton AEC-Q200

More information

Power Resistor Thick Film Technology

Power Resistor Thick Film Technology Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES

More information

Lead (Pb)-free Thick Film, Rectangular Chip Resistors

Lead (Pb)-free Thick Film, Rectangular Chip Resistors D../CRCW... e3 Lead (Pb)-free Thick Film, Rectangular Chip Resistors FEATURES High volume product suitable for commercial and special applications Excellent stability (ΔR/R % for 0 h at 70 C) Compliant

More information

30W Epistar 45mil Chip High Power LED

30W Epistar 45mil Chip High Power LED 30W Epistar 45mil Chip High Power LED White:LEDE-P30-DH-White Warm White:LEDE-P30-DWH Features Long operating life Highest Luminous flux Wide range of colours:2500k-25000k Chip size: Epistar 45*45mil More

More information

WCAP-CSGP Ceramic Capacitors

WCAP-CSGP Ceramic Capacitors A Dimensions: [mm] B Recommended land pattern: [mm] D1 Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1±0.2 Vrms, 1 khz ±10% C 15000 pf ± 10% Rated voltage Dissipation factor

More information

UV LED LAMP SPECIFICATION

UV LED LAMP SPECIFICATION UV LED LAMP SPECIFICATION Model: Nitride Semiconductors Co., Ltd. 1/7 1. Name: UV LED LAMP 2. Model: 3. Absolute maximum ratings (Ta=25 ) Item Symbol Maximum rating Unit DC Forward current I F 25 ma Pulse

More information

Komatsulite NR Series Breaker (Thermal Cutoff Device)

Komatsulite NR Series Breaker (Thermal Cutoff Device) *RoHS COMPLIANT & **HALOGEN FREE Ratings 6 7 5 1 1 1 5 5 C N R 7 2 A B 0 1 2 1 5 C N R 7 7 C B 0 *RoHS COMPLIANT Features n Miniature Thermal Cutoff (TCO) device n Smallest body size, high current type

More information

Contents. 12. Lot Number 10. 13. Reel Packing Structure 11. 14. Precaution for Use 13. 15. Hazard Substance Analysis 14. 16. Revision History 18

Contents. 12. Lot Number 10. 13. Reel Packing Structure 11. 14. Precaution for Use 13. 15. Hazard Substance Analysis 14. 16. Revision History 18 Rev : 00 ISSUE NO : DATE OF ISSUE : 2009. 04. 10 S P E C I F I CATION MODEL : SLHNNWW629T1S0U0S0 [Rank : (S0), (U0), (S0)] HIGH POWER LED - SUNNIX6 CUSTOMER : CUSTOMER CHECKED CHECKED APPROVED SAMSUNG

More information

W724C0 W724C0. Z-Power series is designed for. high current operation and high flux output applications.

W724C0 W724C0. Z-Power series is designed for. high current operation and high flux output applications. W724C0 ZPower series is designed for 사진 high current operation and high flux output applications. ZPower LED's thermal management perform exceeds other power LED solutions. It incorporates state of the

More information

USER S MANUAL. MaxPower 400-600 UPS. Uninterruptible Power System 28-2MAXPO0018

USER S MANUAL. MaxPower 400-600 UPS. Uninterruptible Power System 28-2MAXPO0018 USER S MANUAL MaxPower 400-600 UPS Uninterruptible Power System 28-2MAXPO0018 IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS This manual contains important instructions for models MaxPower 400 and

More information

LITHIUM BATTERY CR123A SPECIFICATION

LITHIUM BATTERY CR123A SPECIFICATION LITHIUM BATTERY CR123A SPECIFICATION Date: April 24, 2012 Approved by: Scotty Scott PANASONIC ENERGY CORPORATION OF AMERICA LITHIUM BATTERY DIVISION 1. Designation : CR123A 2. Nominal Voltage : 3 V 3.

More information

X7R Dielectric Non-Magnetic Multilayer Ceramic Capacitors

X7R Dielectric Non-Magnetic Multilayer Ceramic Capacitors X7R Dielectric Non-Magnetic Multilayer Ceramic Capacitors Product Features Non-Magnetism, Suitable for MRI Part Numbering C 0603 X 222 K 500 P T 1 2 3 4 5 6 7 8 Chip Capacitor Chip Capacitor Dimensions

More information

Metal Film Resistors, Military, MIL-R-10509 Qualified, Type RN and MIL-PRF-22684 Qualified, Type RL

Metal Film Resistors, Military, MIL-R-10509 Qualified, Type RN and MIL-PRF-22684 Qualified, Type RL CMF (Military RN and RL) Metal Film Resistors, Military, Qualified, Type RN and Qualified, Type RL FEATURES Very low noise (- 40 db) Very low voltage coefficient (5 ppm/v) Controlled temperature coefficient

More information

Classification Contact form Mounting method Terminals Rated voltage Model Equipped with operation indicator and diode to absorb coil surge.

Classification Contact form Mounting method Terminals Rated voltage Model Equipped with operation indicator and diode to absorb coil surge. Terminal Relay CSM_G6B-4 ND_DS_E_3_1 Compact Terminal Relay with 4 Independent Outputs Equipped with four G6B Mini-relays that are compact, highly sensitive, and highly resistant to dielectric surges,

More information