Integrated Process Solutions

Size: px
Start display at page:

Download "Integrated Process Solutions"

Transcription

1 W W W. M K S I N S T. C O M Integrated Process Solutions Series ISO-KF FITTINGS SIZES NW 0 TO NW 00 (/2'' TO 4'')

2

3 Table of Contents Introduction s Short Weld Stub... 5 Long Weld Stub... 5 Weld Socket... 6 Blank with Bore... 6 Blank-Off... 7 Unbored Stub... 8 Seals Centering Ring Assemblies Adaptive Centering Ring Assemblies...0- Replacement O-Rings...-2 Overpressure Assembly... 2 Clamps Toggle Clamp... 2 Toggle Clamp with Lanyard... Wing Nut Clamp... Bulkhead Clamp... Chain Clamp... 4 Reducers... 4 Adapters Conical Adapter... 4 Step Adapter, ISO-MF to ISO-KF... 5 Adapter, ISO-KF to CF... 5 Adapter, ISO-KF to ASA, without O-Ring Groove... 5 Adapter, ISO-MF to ASA, with O-Ring Groove... 6 Adapter, ISO-KF to NPT Pipe... 7 Adapter Tee, ISO-KF to NPT-F Pipe... 8 Adapter, ISO-KF to Rubber Hose... 8 Adapter, ISO-KF to VCR-M... 8 Adapter, ISO-KF to VCR-F... 9 Adapter, ISO-KF to PVC Hose... 9 Adapter, ISO-KF to Compression Fitting... 9 Viewing Port Elbows 90 Elbows, Elbows... 2 Crosses... 2 Tees Straight Sections Tubing... 2 Flexible Sections Metal Hose, Thick Wall... 2 Metal Hose, Thin Wall Braided Metal Hose PVC Tubing & Clamps Protector Caps Numerical Listing Back Cover MKS Series

4 Introduction Series is a line of ISO-KF standard vacuum components. The ISO-KF system refers to the family of small vacuum components (up to 2 ), including flanges, elbows, tees and crosses. The International Standards Organization has defined the interface dimensions, allowing the interchanging of components that conform to the standard s dimensions. Applications ISO-KF fittings can be used in a wide variety of applications including: Roughing and foreline plumbing Small systems Systems requiring frequent cleaning or modification Research and teaching laboratories. ISO-KF components are primarily designed for use at subatmospheric pressure. Because of the large number of elastomer seals used, typical limiting pressure without baking is about 0-7 Torr. Baked systems using Viton seals can be used to two decades lower. Standard components can be used to slight overpressure. If the ISO-KF system contains significant overpressure, i.e., 5-00 psig, then use the MKS overpressure rings. Description The ISO-KF system is a modular, building block method of creating a piping system. There are several advantages in the use of ISO components. Since component dimensions are standardized, elbows, tees, crosses or valves for a given size may be interchanged. The flanges are sexless and the seal is symmetrical, so that the components are rotatable. By using ISO components, system assembly is quick and cost effective. See Figure for the ISO dimensions of flange sizes 0, 6, 25, 40 and 50. These dimensions apply to ISO-KF flanges of these nominal diameters throughout this catalog. The catalog contains dimension specifics. The Series component line also includes a few components in NW 80 ( ) and NW 00 (4 ) sizes. There is no international standard for these sizes in the KF style. MKS has designed the flanging using series consistencies and customer requirements. Installation The ISO-KF components are assembled by inserting a centering ring between the two flange faces, then securing the assembly with a flange encompassing clamp (see Figure 2). There are a variety of clamp choices in the Series line. The wing-nut clamp, shown in Figure 2, is hand tightened until metal contact is felt. A version of the wing-nut clamp with a washer is available, contact MKS for more information. The MKS toggle clamp is convenient and easy to use. The clamp provides enough sealing force to fully compress the O-Ring, so that the flanges and the centering ring are metal to metal. The heavy-duty spring supports the full range of production tolerance variables (2) (2.5).8 (0).0 (2.5).68 (7).8 (0).0 (2.5).0 (26).57 (40).0 (2.5).62 (4) 2.6 (55).0 (2.5) 2.06 (52) 2.95 (75).2 ().2 ().2 ().2 ().2 () NW 0 ISO-KF ISO-KF ISO-KF ISO-KF ISO-KF Figure - ISO-KF Dimensions 2 MKS Series

5 Clamp Centering Ring The Series ISO-KF line also includes bulkhead clamps. They are used to attach an ISO-KF flange directly to a chamber or base plate. The two-part, bolted clamp fits over the flange. A centering ring assembly is needed between the flange and the opening. The bulkhead clamp kit includes the two-piece clamp, bolts and washers (see Figure 4). O-Ring The NW 0 flange uses the same basic flange and clamp as the flange, and the two flanges can join via an adaptive centering ring (see Figure 5). Adaptive centering rings are also available for obsolete sizes (NW 20, NW 2) in the ISO-KF series. Clamp O-Ring Centering Ring Figure 2 - Component Assembly The self-adjusting clamp locks in a positive method. A pin can be inserted to prevent accidental release of the toggle lever (see Figure ). The toggle clamps are ideal for situations where the clamp must be removed frequently, like leak testing or gauge calibration. An additional option to the toggle clamp is a model with a fastening pin on a lanyard. The pin is fastened so that it cannot be accidentally removed and the lanyard prevents the pin s loss. Hole for cotter pin to prevent accidental release of the clamp Figure 4 - Bulkhead Clamp. Base Plate 2. Bulkhead Clamp. KF 4. Seal Weld assembly of stainless or aluminum parts should be performed by an experienced TIG welder. Using a rotating fixture simplifies creation of high quality joints. MKS aluminum weld stubs are chamfered for using filler metal. Improper welding can lead to warping of flanges. Brass flanges, stub or socket types, are toleranced for silver brazing where clearances of a few thousandths of an inch are optimal for alloy flow. Brass components may be soft Range slot limits spring travel Spring accomodates tolerances ISO-KF NW 0 ISO-KF Figure - Toggle Clamp Figure 5 - Adaptive Centering Rings MKS Series

6 soldered. However, it is much more difficult to make leak free assemblies by soft soldering than by silver brazing. Soft soldering has little strength, and the assemblies cannot be cleaned by immersion in a chemical bright dip. If system pressures are in the positive pressure range, it is recommended that over pressure rings are used. The ISO-KF over pressure rings are installed differently by size. The NW 6, 25, and 40 ISO-KF rings are installed over the two ISO- KF flanges. The NW 0 and 50 ISO-KF rings are installed between the two flange faces. The clamp is installed around all items to secure the assembly (see Figures 6 and 6a). For more information, contact Customer Service at or , 25, 40 Over Pressure Ring NW 0, 50 Over Pressure Ring Figure 6 - Overpressure Rings Elastomer Comparison Buna-N Viton Silicone Compound N V S Color Black Black Rust Bakeout 80 C 50 C 85 C Benefits Seals easier; lower cost Chemical resistance; lasts longer Specifications Maximum Pressure NW 0-25: 00 psig (with over pressure ring) : 75 psig NW50: 50 psig Minimum Pressure Leak Check Materials Fittings Clamps Over Pressure Rings Seal Assembly 0-9 Torr <0-9 std-cc/s High temperature 04 Stainless Steel Yellow Brass 606T6 Aluminum (6 Stainless is available on request) Aluminum Stainless Steel Choice of aluminum or stainless steel centering ring; Choice of Viton, Silicone, or Buna-N elastomer seal Figure 6a - Captured O-Ring Overpressure Assembly 4 MKS Series

7 , Short Weld Stub, Stainless Steel NW 0 For Tubing OD 2 A B C 0.50 () 0.50 () 0.75 (9).00 (25).50 (8) 2.00 (5) (.7) (.7) (.7) (.7) (.7) (.7) 0.50 () 0.50 () 0.50 () 0.50 () 0.75 (9) 0.75 (9) Stainless Steel Type 04 Butt Weld Standard Inch Stub Diameters, Short Weld Stub, Aluminum For Tubing OD 2 A B C 0.50 () 0.75 (9).00 (25).50 (8) 2.00 (5) (.7) (.7) (.7) 0.08 (2.) 0.08 (2.) 0.50 () 0.50 () 0.50 () 0.75 (9) 0.75 (9) Aluminum Type 606T6 Butt Weld Standard Inch Stub Diameters, Long Weld Stub, Stainless Steel NW 0 For Tubing OD 2 A B C 0.50 () 0.50 () 0.75 (9).00 (25).50 (8) 2.00 (5) (.7) (.7) (.7) (.7) (.7) (.7).58 (40).58 (40).58 (40).58 (40).58 (40).58 (40) Stainless Steel Type 04 Butt Weld Standard Inch Stub Diameters, Long Weld Stub, Aluminum For Tubing OD 2 A B C 0.50 () 0.75 (9).00 (25).50 (8) 2.00 (5) (.7) (.7) (.7) 0.08 (2.) 0.08 (2.).58 (40).58 (40).58 (40).58 (40).58 (40) Aluminum Type 606T6 Standard Inch Stub Diameters MKS Series 5

8 , Weld Socket, Stainless Steel For Tubing OD 5 2 A B C 0.6 (5) 0.77 (20) 0.87 (22). (29).75 (44) 2.25 (57) 0.5 () 0.64 (6) 0.76 (9).02 (26).50 (8) 2.02 (5) 0.45 () 0.58 (5) 0.68 (7) 0.87 (22).7 (5).87 (47) Stainless Steel Type 04 Self Aligning Standard Tube Weld Prep. Also Suitable for Butt Weld, Blank with Bore, Stainless Steel Bore A B C Stainless Steel Type 04 Standard Inch Tube OD s NW 0 NW 0 NW (7) 0.9 (0) 0.44 () 0.26 (7) 0.9 (0) 0.5 () 0.68 (7) 0.26 (7) 0.9 (0) 0.5 () 0.6 (6) 0.89 (2) 0.26 (7) 0.9 (0) 0.5 () 0.6 (6) 0.89 (2).9 (5) 0.26 (7) 0.9 (0) 0.5 () 0.6 (6) 0.89 (2).9 (5).89 (48) N/A N/A 0.5 () N/A N/A N/A 0.76 (9) N/A N/A N/A 0.76 (9).02 (26) N/A N/A N/A 0.76 (9).02 (26).52 (9) N/A N/A N/A 0.76 (9).02 (26).52 (9) 2.02 (5) , Blank with Bore, KF 80 / KF 00, Stainless Steel Bore A B C NW 80 NW (4) 5.28 (4).27 (8) 4.02 (02) 2.90 (74).87 (98) Stainless Steel Type 04 6 MKS Series

9 , Blank-Off, Stainless Steel NW 0 NW 80 NW 00 A 0.4 () 0.4 () Stainless Steel Type 04 To Close Off Unused Ports, Blank-Off, Aluminum NW 0 A Aluminum Alloy To Close Off Unused Ports MKS Series 7

10 , Unbored Stub, Stainless Steel NW 0 A B 0.75 (9) 0.75 (9).00 (25).50 (8) 2.00 (5) 0.75 (9) 0.75 (9) 0.75 (9).00 (25).00 (25) Stainless Steel Type 04 Stub may be turned, bored or tapped to fit, Unbored Stub, Aluminum NW 0 A B 0.75 (9) 0.75 (9).00 (25).50 (8) 2.00 (5) 0.75 (9) 0.75 (9) 0.75 (9).00 (25).00 (25) Aluminum Type 606T6 Stub may be turned, bored or tapped to fit 8 MKS Series

11 Seal, Centering Ring Assembly, Stainless Steel/Viton 80 C Max Replaceable O-Ring NW 80/00 includes aluminum spacer ring NW 0 NW 80 NW Seal, Centering Ring Assembly, Aluminum/Viton 80 C Max Replaceable O-Ring NW 80/00 includes aluminum spacer ring NW 0 NW 80 NW Seal, Centering Ring Assembly, Stainless Steel/Buna-N NW C Max Replaceable O-Ring Seal, Centering Ring Assembly, Aluminum/Buna-N 80 C Max Replaceable O-Ring NW 80/00 includes aluminum spacer ring NW 0 NW 80 NW MKS Series 9

12 Seal, Centering Ring Assembly, Stainless Steel/Silicone NW C Max Replaceable O-Ring Seal, Centering Ring Assembly Overpressure, Stainless Steel/Viton Stainless Steel Centering Ring Replaceable Viton O-Ring Includes Aluminum Overpressure Ring Seal, Centering Ring Assembly w/ Screen, Stainless Steel/Viton Stainless Steel Centering Ring Replaceable Viton O-Ring 72 Mesh Screen Stainless Steel Seal, Adaptive Centering Ring Assembly, Stainless Steel/Viton NW 0 NW 20 NW Stainless Steel Centering Ring Replaceable Viton O-Ring For Obsolete Bore s 0 MKS Series

13 Seal, Adaptive Centering Ring Assembly, Aluminum/Viton NW 0 NW 20 NW Replaceable Viton O-Ring For Obsolete Bore s Seal, Adaptive Centering Ring Assembly, Aluminum/Buna-N NW 0 NW 20 NW Replaceable O-Ring For Obsolete Bore s Seal, Replacement O-Ring, Viton NW 0 NW 80 NW 00 Standard O-Ring Standard Inch O-Ring s Seal, Replacement O-Ring, Buna-N NW 0 NW 80 NW 00 Standard O-Ring Standard Inch O-Ring s MKS Series

14 Seal, Replacement O-Ring, Silicone NW 0 Standard O-Ring Standard Inch O-Ring s Ring, Overpressure Max. Pressure A B C Part Number NW 0 00 psig 00 psig 00 psig 75 psig 50 psig.25 ().25 ().66 (42) 2.25 (57) 2.75 (70).09 (28).9 (0).58 (40) 2.7 (55) 2.66 (68) 0.4 (4) 0.5 (9) 0.5 (9) 0.5 (9) 0.4 (4) Stainless Steel Fits over OD of O-ring Use to retain O-ring when system is used at internal pressures over atmospheric Clamp, Toggle Fits s A B C 6/0 25/20 40/ (0) 4. (09) 4.87 (24) 6.4 (6) 2.50 (64) 2.96 (75).29 (84) 4.7 (20) 0.75 (9) 0.75 (9) 0.75 (9) 0.89 (2) Aluminum Quick Operating Positive Locking Method Self Adjusting Cannot Be Over-tightened 2 MKS Series

15 Clamp, Toggle w/ Lanyard Fits s A B C 6/0 25/20 40/ (0) 4. (09) 4.87 (24) 6.4 (6) 2.50 (64) 2.96 (75).29 (84) 4.7 (20) 0.75 (9) 0.75 (9) 0.75 (9) 0.89 (2) L L L L Aluminum Fastening pin on lanyard prevents accidental opening and pin loss Positive locking method Self-adjusting Heavy duty spring supports the full range of production tolerance variables Clamp, Wing Nut Fits s A B C 6/0 25/20 40/ (57) 2.76 (70).9 (86) 4. (0).69 (4) 2.7 (55) 2.76 (70).70 (94) 0.6 (6) 0.6 (6) 0.6 (6) 0.79 (20) Aluminum 70 inch-pounds max torque Clamp, Bulkhead Number of Bolts A B C 0.6 (9) 0.9 (0) 0.7 (9) 0.40 (0) 2.00 (5) 2.8 (60) 2.94 (75).75 (95).50 (8).89 (48) 2.44 (62).25 (8) Aluminum Adapts to a baseplate or fixed flange Standard KF seal assembly Stainless steel bolts and washers included, 0-2 x 5 MKS Series

16 Clamp, Chain For use with KF 80 and 00 flanges Aluminum NW 80 NW Conical Reducer, Stainless Steel A B 0.62 (6) 0.62 (6) 0.62 (6) 0.87 (22) 0.87 (22).4 (4).57 (40).57 (40).57 (40).57 (40).57 (40).57 (40) Mates differing ISO-KF flange sizes Conical Reducer, Aluminum A B 0.62 (6) 0.62 (6) 0.62 (6) 0.87 (22) 0.87 (22).4 (4).57 (40).57 (40).57 (40).57 (40).57 (40).57 (40) Mates differing ISO-KF flange sizes Conical Adapter, ISO-MF to ISO-KF A B C NW 6 to NW 6 to NW 80 to NW 80 to NW 00 to.9 (86).9 (86) 4.64 (8) 4.64 (8) 4.64 (8) 2.7 (60) 2.7 (60) 2.87 (7) 2.87 (7).8 (97).7 (5).87 (47).7 (5).87 (47).87 (47) Stainless Steel Type 04 High conductance adapter Special adapters available upon request 4 MKS Series

17 Step Adapter, ISO-MF to ISO-KF A B NW 6 to NW 6 to NW 80 to NW 80 to NW 00 to NW 00 to.77 (45).77 (45).77 (45).77 (45).77 (45).77 (45).7 (5).87 (47).87 (47).87 (47).7 (5).87 (47) Stainless Steel Type 04 Adapter, ISO-KF to CF (KF) (CF) Mini / A B 2.08 (5).78 (45).89 (48).78 (45).78 (45) 2. (54).95 (50) 0.62 (6) 0.62 (6) 0.87 (22) 0.87 (22). (4).7 (5).8 (46) Stainless Steel Type 04 Adapter, ISO-KF to ASA, without O-Ring Groove (KF) (ASA) 2 2 A B C.8 (46).8 (46).8 (46).8 (46).8 (46).8 (46). (4). (4). (4).8 (46).8 (46).8 (46) 5.00 (27) 6.00 (52) 7.50 (9) 5.00 (27) 6.00 (52) 7.50 (9) Stainless Steel Type 04 Without O-Ring Groove MKS Series 5

18 Adapter, ISO-KF to ASA, with O-Ring Groove (KF) (ASA) 2 2 Groove ID (O-Ring) 2.66 (2-2).42 (2-27) 4.69 (2-247) 2.66 (2-2).42 (2-27) 4.69 (2-247) A B C.8 (46).8 (46).8 (46).8 (46).8 (46).8 (46). (4). (4). (4).8 (46).8 (46).8 (46) 5.00 (27) 6.00 (52) 7.50 (9) 5.00 (27) 6.00 (52) 7.50 (9) Part Number Stainless Steel Type 04 With O-ring Groove ASA O-Ring, Viton (ASA) 2 O-Ring MKS Series

19 Adapter, ISO-KF to NPT-F Pipe, Stainless Steel (KF) NW 0 NW 0 (NPT) A B 0.62 (6) 0.62 (6) 0.62 (6) 0.62 (6) 0.88 (22) 0.88 (22).25 (2).25 (2).75 (44).75 (44) 0.75 (9) 0.75 (9) 0.75 (9) 0.75 (9) 0.75 (9) 0.75 (9).00 (25).00 (25).00 (25).00 (25) Teflon Tape recommended to seal Compatible with most TC and Pirani tubes Adapter, ISO-KF to NPT-F Pipe, Aluminum (KF) NW 0 NW 0 (NPT) A B 0.62 (6) 0.62 (6) 0.62 (6) 0.62 (6) 0.88 (22) 0.88 (22).25 (2).25 (2).75 (44).75 (44) 0.75 (9) 0.75 (9) 0.75 (9) 0.75 (9) 0.75 (9) 0.75 (9).00 (25).00 (25).00 (25).00 (25) Teflon Tape recommended to seal Compatible with most TC and Pirani tubes Adapter, ISO-KF to NPT-M Pipe, Stainless Steel Stainless Steel Hex Shank Tapered Thread Teflon Tape recommended to seal (KF) (NPT) 2 A B.57 (40).97 (50).57 (40).97 (50) 2.95 (75) 2.95 (75).97 (50) 2.95 (75) 2.95 (75) 2.95 (75) 2.00 (5) 2.00 (5).97 (50) 2.95 (75) 2.95 (75) 2.95 (75) 2.00 (5) 0.9 (5) 0.26 (7) 0.9 (5) 0.26 (7) 0.45 () 0.78 (20) 0.26 (7) 0.45 () 0.78 (20) 0.88 (22).2 (28).4 (4) 0.26 (7) 0.45 () 0.78 (20) 0.88 (22).87 (47) MKS Series 7

20 Adapter Tee, ISO-KF to NPT-F Pipe, Stainless Steel (KF) (NPT) A B Tapped Tapped Tapped Tapped Tapped Tapped Tapped Tapped 0.76 (9) 0.76 (9) 0.76 (9) 0.76 (9) 0.76 (9) 0.76 (9) 0.76 (9) 0.76 (9).57 (40).57 (40).57 (40).57 (40).57 (40).57 (40).57 (40).57 (40) Available with additional NPT holes Teflon Tape recommended to seal Adapter Tee, ISO-KF to NPT-F Pipe, Aluminum (KF) (NPT) A B Tapped Tapped Tapped Tapped Tapped Tapped Tapped Tapped 0.76 (9) 0.76 (9) 0.76 (9) 0.76 (9) 0.76 (9) 0.76 (9) 0.76 (9) 0.76 (9).57 (40).57 (40).57 (40).57 (40).57 (40).57 (40).57 (40).57 (40) Available with additional NPT holes Teflon Tape recommended to seal Adapter, ISO-KF to Rubber Hose Hose A B or 5 5 or or 7 or 5 or (6) 0.75 (9) 0.88 (22).6 (4).6 (4).65 (42).65 (42).7 (44) 2.7 (55) 2.7 (55) Aluminum Compatible with standard vacuum hose bores Adapter, ISO-KF to VCR -M (VCR) A B VCR Stainless Steel 4 VCR 8 VCR 4 VCR 8 VCR 2 VCR 4 VCR 8 VCR 2 VCR 4 VCR 8 VCR 2 VCR.40 (6).6 (4).40 (6).60 (4) 2.4 (54).40 (6).60 (4) 2.0 (5).40 (6).60 (4) 2.0 (5) 0.9 (5) 0.4 (0) 0.9 (5) 0.4 (0) 0.62 (6) 0.9 (5) 0.4 (0) 0.62 (6) 0.9 (5) 0.4 (0) 0.62 (6) MKS Series

21 Adapter, ISO-KF to VCR -F Stainless Steel (VCR) 4 VCR 8 VCR 4 VCR 8 VCR 2 VCR 4 VCR 8 VCR 2 VCR 4 VCR 8 VCR 2 VCR A.40 (6).6 (4).40 (6).60 (4) 2.4 (54).40 (6).60 (4) 2.0 (5).40 (6).60 (4) 2.0 (5) B 0.9 (5) 0.4 (0) 0.9 (5) 0.4 (0) 0.62 (6) 0.9 (5) 0.4 (0) 0.62 (6) 0.9 (5) 0.4 (0) 0.62 (6) VCR Adapter, ISO-KF to PVC Hose Hose A B C NW () 0.50 () 0.75 (9).00 (25).50 (8) 2.00 (5).26 (2).26 (2).26 (2).50 (8).97 (50) 2.7 (55) 0.79 (20) 0.79 (20) 0.79 (20).02 (26).50 (8).6 (4) Stainless Steel Type 04 Recommend the use of hose clamps Adapter, ISO-KF to Compression Fitting Stainless Steel Viton O-Ring Compression fitting tightened by hand Compression connect for tube insertion NW 0 For Tubing OD 2 A B C 0.4 (0) 0.9 (5) 0.4 (0) 0.62 (6) 0.4 (0) 0.62 (6) 0.88 (22) 0.4 (0) 0.62 (6) 0.88 (22).4 (29).25 (2) 0.62 (6) 0.88 (22).4 (29).25 (2) 2.0 (5) 2. (5).4 (6) 2.4 (6) 2.4 (6) 2.4 (6) 2.5 (64) 2.4 (6) 2.6 (66) 2.8 (7) 2.8 (7) 2.9 (74) 2.9 (74) 2.8 (7) 2.8 (7) 2.9 (74).0 (76).4 (87).80 (20).62 (6).80 (20).94 (24).80 (20).94 (24).94 (24).80 (20).94 (24).94 (24).94 (24).94 (24).94 (24).94 (24).94 (24).94 (24) 2.5 (6) MKS Series 9

22 ISO-KF Viewing Port A 0.9 (24) (2) Stainless Steel Max. Temperature 50 C Optical quality borosilicate glass ISO-KF Elbow 90 Smooth Radius A.57 (40).97 (50) 2.56 (65) 2.76 (70) Stainless Steel Type 04 Same s Both Ports Standard Modulus ISO-KF Elbow 90 Smooth, Long Radius A 5.2 (0) (40) Stainless Steel Type 04 Same s both Ports Twice Standard Modulus 20 MKS Series

23 ISO-KF Elbow 45 Smooth Radius A 0.9 (2).2 (28).68 (4).99 (5) Stainless Steel Type 04 Same s Both Ports ISO-KF Cross A B.57 (40).97 (50) 2.56 (65) 2.76 (70).5 (80).94 (00) 5.2 (0) 5.5 (40) Stainless Steel Type 04 Same s all Ports Standard Modulus ISO-KF Tee A B.57 (40).97 (50) 2.56 (65) 2.76 (70).5 (80).94 (00) 5.2 (0) 5.5 (40) Stainless Steel Type 04 Same s all Ports Standard Modulus MKS Series 2

24 ISO-KF Tee, Reducing Tee A B C Part Number.94 (00) 5.2 (0) 5.5 (40) 4.80 (22) 6.29 (60) 6.29 (60).08 (27).2 (4).58 (40) 2.40 (6) 2.65 (67) 2.65 (67).97 (50) 2.56 (65) 2.76 (70) 2.40 (6).5 (80).5 (80) Stainless Steel Type 04 Same s Thru Ports ISO-KF Straight Section A.5 (80) 2.60 (20).94 (00) 2.60 (20) 5.2 (0) 2.60 (20) 5.5 (40) 2.60 (20) Stainless steel type 04 Special lengths to order 22 MKS Series

25 Tubing NW 0 NW 80 NW 00 NW 00 A Tube Wall 0.50 () 0.75 (9).00 (25).50 (8) 2.00 (5).00 (76) 4.00 (02) 4.00 (02) (.7) (.7) (.7) (.7) (.7) (.7) (.7) 0.08 (2.) Tube ends deburred Stainless Steel Price per 0 foot length of tube ISO-KF Bellows Section Static Bend Radius 2 Hose Wall.006 (0.5).006 (0.5).006 (0.5).006 (0.5) A.94 (00).94 (00).94 (00).94 (00) B.07 (78).07 (78) 2.9 (74). (79) Spring Rate 56 lb/in 44 lb/in 2 lb/in 2 lb/in Part Number Stainless Steel Type 2 ISO-KF Thick Wall Metal Hose Static Bend Radius Hose Wall.02 (0.0).02 (0.0).02 (0.0).02 (0.0).02 (0.0).02 (0.0).02 (0.0).02 (0.0).02 (0.0).02 (0.0).02 (0.0).02 (0.0) A 9.84 (250) 9.69 (500) 9.40 (000) 9.84 (250) 9.69 (500) 9.40 (000) 9.84 (250) 9.69 (500) 9.40 (000) 9.84 (250) 9.69 (500) 9.40 (000) Spring Rate 256 lb/in 28 lb/in 64 lb/in 224 lb/in 2 lb/in 56 lb/in 220 lb/in 0 lb/in 55 lb/in 220 lb/in 0 lb/in 55 lb/in Stainless Steel Unsheathed Butt Welded Special Lengths to Order Thick wall hose static bend radius is to point of permanent deformation MKS Series 2

26 ISO-KF Thin Wall Metal Hose Stainless Steel Unsheathed Butt Welded Special Lengths to Order Static Bend Radius Hose Wall.006 (0.5).006 (0.5).006 (0.5).006 (0.5).006 (0.5).006 (0.5).006 (0.5).006 (0.5).006 (0.5).006 (0.5).006 (0.5).006 (0.5).006 (0.5).006 (0.5).006 (0.5).006 (0.5).006 (0.5).006 (0.5).006 (0.5).006 (0.5) A 9.84 (250) 2.02 (05) 9.69 (500) (62) 9.40 (000) 9.84 (250).99 (05) 9.69 (500) (60) 9.40 (000) 9.84 (250) 2.2 (08) 9.69 (500) (6) 9.40 (000) 9.84 (250).9 (0) 9.69 (500) (62) 9.40 (000) B 6.4 (6) 7.82 (99) 2.0 () 8.2 (460) 24.0 (6) 6.4 (6) 7.82 (99) 2.0 () 8.2 (460) 24.0 (6) 6.2 (58) 7.88 (200).70 (297) 8.2 (460) (57) 7.05 (79) 8.64 (29).50 (42) 8.2 (460) 26.0 (667) Spring Rate 27 lb/in 2 lb/in 2 lb/in 9 lb/in 5.8 lb/in 6 lb/in 4 lb/in 7. lb/in 6.5 lb/in.4 lb/in 8.6 lb/in 7 lb/in.9 lb/in lb/in.9 lb/in lb/in 2 lb/in 5.9 lb/in 5 lb/in 2.9 lb/in Part Number ISO-KF Braided Metal Hose Ideal for rough pumping lines Stainless Steel Flexible, yet resistant to contraction Static Bend Radius A 0.2 (259) 20.2 (54) 40.2 (022) 0.27 (26) (55) (02) 0.28 (26) (55) (02) 0.5 (268) 20.5 (522) 40.5 (00) MKS Series

27 PVC Hose NW 0 A 0.50 () 0.75 (9).00 (25).50 (8) 2.00 (5) Good for exhaust lines Wire molded in tube wall for reinforcement Larger OD PVC has limited flexibility in short lengths PVC Hose Clamps NW 0 Hose Protector Caps Protects Faces Plastic MKS Series 25

28 Numerical Listing PVC Hose Clamp, NW 0, PVC Hose Clamp,, PVC Hose Clamp, PVC Hose Clamp, PVC Hose Clamp, Adapter, Hose, to 5 or, Aluminum 0080 Adapter, Hose, to or 7, Aluminum Adapter, Hose, to or 5, Aluminum Adapter, Hose, to or 5, Aluminum 008 Adapter, Hose, to or 5, Aluminum Seal, ASA O-ring, 2-2,, Viton Seal, ASA O-ring, 2-27, 2, Viton Seal, ASA O-ring, 2-247,, Viton Protector Caps,, Plastic Protector Caps,, Plastic Protector Caps,, Plastic Protector Caps,, Plastic 0000, Short Weld Stub,, Aluminum 0000, Short Weld Stub,, Aluminum 00005, Short Weld Stub,, Aluminum 00006, Short Weld Stub,, Aluminum 000, Short Weld Stub,, Aluminum 00020, Long Weld Stub,, Aluminum 00020, Long Weld Stub,, Aluminum , Long Weld Stub,, Aluminum , Long Weld Stub,, Aluminum 0002, Long Weld Stub,, Aluminum 00000, Short Weld Stub, NW 0, 04 SS 0000, Short Weld Stub,, 04 SS 0000, Short Weld Stub,, 04 SS 00005, Short Weld Stub,, 04 SS 00006, Short Weld Stub,, 04 SS 000, Short Weld Stub,, 04 SS 0000, Unbored, NW 0, Aluminum 000, Unbored,, Aluminum 000, Unbored,, Aluminum 0005, Unbored,, Aluminum 0006, Unbored,, Aluminum 0000, Unbored, NW 0, 04 Stainless Steel 000, Unbored,, 04 Stainless Steel 000, Unbored,, 04 Stainless Steel 0005, Unbored,, 04 Stainless Steel 0006, Unbored,, 04 Stainless Steel 00600, Blank-Off, NW 0, Aluminum 0060, Blank-Off,, Aluminum 0060, Blank-Off,, Aluminum 00605, Blank-Off,, Aluminum 00606, Blank-Off,, Aluminum 00700, Blank-Off, NW 0, 04 Stainless Steel 0070, Blank-Off,, 04 Stainless Steel 0070, Blank-Off,, 04 Stainless Steel 00705, Blank-Off,, 04 Stainless Steel 00706, Blank-Off,, 04 Stainless Steel Adapter Pipe, NW 0 to NPT, female, Aluminum Adapter Pipe, to NPT, female, Aluminum Adapter Pipe, to NPT, female, Aluminum Adapter Pipe, to NPT, female, Aluminum Adapter Pipe, to NPT, female, Aluminum Adapter Pipe, NW 0 to NPT,female, SS 0020 Adapter Pipe, to NPT, female, SS 0020 Adapter Pipe, to NPT, female, SS Adapter Pipe, to NPT, female, SS Adapter Pipe, to NPT, female, SS Adapter Pipe, NW 0 to NPT-F, Aluminum Adapter Pipe, to NPT-F, Aluminum Adapter Pipe, to NPT-F, Aluminum Adapter Pipe, to NPT-F, Aluminum Adapter Pipe, to NPT-F, Aluminum Adapter Pipe, NW 0 to NPT-F, SS 0020 Adapter Pipe, to NPT-F, SS 0020 Adapter Pipe, to NPT-F, SS Adapter Pipe, to NPT-F, SS Adapter Pipe, to NPT-F, SS Centering Ring Assy, NW 0, Alum./Buna-N O-ring Centering Ring Assy,, Alum./Buna-N O-ring Centering Ring Assy,, Alum./Buna-N O-ring Centering Ring Assy,, Alum./Buna-N O-ring Centering Ring Assy,, Alum./Buna-N O-ring Centering Ring Assy, NW 0, Alum./Viton O-ring Centering Ring Assy,, Alum./Viton O-ring Centering Ring Assy,, Alum./Viton O-ring Centering Ring Assy,, Alum./Viton O-ring Centering Ring Assy,, Alum./Viton O-ring Centering Ring Assy, NW 0, SS/Viton O-ring Centering Ring Assy,, SS/Viton O-ring Centering Ring Assy,, SS/Viton O-ring Centering Ring Assy,, SS/Viton O-ring Centering Ring Assy,, SS/Viton O-ring Centering Ring Assy, NW 0, SS/Buna-N O-ring Centering Ring Assy,, SS/Buna-N O-ring Centering Ring Assy,, SS/Buna-N O-ring Centering Ring Assy,, SS/Buna-N O-ring Centering Ring Assy,, SS/Buna-N O-ring 26 MKS Series

29 00290 Wing Nut Clamp,, fits 6/0, Aluminum Wing Nut Clamp,, fits 25/20, Aluminum Wing Nut Clamp,, fits 40/2, Aluminum Wing Nut Clamp,, fits 50, Aluminum Tee,, 04 Stainless Steel Tee,, 04 Stainless Steel Tee,, 04 Stainless Steel Tee,, 04 Stainless Steel 0020 Braided Metal Hose, 0,, Stainless Steel 0020 Braided Metal Hose, 0,, Stainless Steel Braided Metal Hose, 0,, Stainless Steel Braided Metal Hose, 0,, Stainless Steel 000 Braided Metal Hose, 20,, Stainless Steel 000 Braided Metal Hose, 20,, Stainless Steel 0005 Braided Metal Hose, 20,, Stainless Steel 0006 Braided Metal Hose, 20,, Stainless Steel 0040 Braided Metal Hose, 40,, Stainless Steel 0040 Braided Metal Hose, 40,, Stainless Steel Braided Metal Hose, 40,, Stainless Steel Braided Metal Hose, 40,, Stainless Steel 005 Conical Reducer, to, Aluminum 0052 Conical Reducer, to, Aluminum 005 Conical Reducer, to, Aluminum 0054 Conical Reducer, to, Aluminum 0055 Conical Reducer, to, Aluminum 0056 Conical Reducer, to, Aluminum 007 Conical Reducer, to, 04 SS 0072 Conical Reducer, to, 04 SS 007 Conical Reducer, to, 04 SS 0074 Conical Reducer, to, 04 SS 0075 Conical Reducer, to, 04 SS 0076 Conical Reducer, to, 04 SS O-Ring, standard size 2-2, NW 0, Buna-N 0090 O-Ring, standard size 2-4,, Buna-N 0090 O-Ring, standard size 2-20,, Buna-N O-Ring, standard size 2-26,, Buna-N O-Ring, standard size 2-0,, Buna-N O-Ring, standard size 2-2, NW 0, Viton O-Ring, standard size 2-4,, Viton O-Ring, standard size 2-20,, Viton O-Ring, standard size 2-26,, Viton O-Ring, standard size 2-0,, Viton Tube (price per 0 foot), NW 0, 0.50 O.D., SS 0040 Tube (price per 0 foot),, 0.75 O.D., SS 0040 Tube (price per 0 foot),,.00 O.D., SS Tube (price per 0 foot),,.50 O.D., SS Tube (price per 0 foot),, 2.00 O.D., SS Elbow, Smooth Radius,, 04 SS Elbow, Smooth Radius,, 04 SS Elbow, Long Radius,, 04 SS Elbow, Long Radius,, 04 SS Elbow, Smooth Radius,, 04 SS Elbow, Smooth Radius,, 04 SS Cross,, 04 Stainless Steel Cross,, 04 Stainless Steel Cross,, 04 Stainless Steel Cross,, 04 Stainless Steel 0049 Bellows,, Stainless Steel 0049 Bellows,, Stainless Steel Bellows,, Stainless Steel Bellows,, Stainless Steel 0050 Straight Section,, 04 Stainless Steel 0050 Straight Section,, 04 Stainless Steel Straight Section,, 04 Stainless Steel Straight Section,, 04 Stainless Steel 005 Straight Section,, 04 Stainless Steel 005 Straight Section,, 04 Stainless Steel 0055 Straight Section,, 04 Stainless Steel 0056 Straight Section,, 04 Stainless Steel Adapter, ISO-KF to CF, to -/ CF, SS Adapter, ISO-KF to CF, to 2- CF, SS Adapter, ISO-KF to CF, to 2- CF, SS Adapter, ISO-KF to CF, to 4- CF, SS 0056 Adapter, ISO-KF to CF, to 2- CF, SS , Long Weld Stub, NW 0, 04 SS 00570, Long Weld Stub,, 04 SS 00570, Long Weld Stub,, 04 SS , Long Weld Stub,, 04 SS , Long Weld Stub,, 04 SS 0057, Long Weld Stub,, 04 SS Seal Assembly, to NW 0, Alum./Buna Seal Assembly, to NW 20, Alum./Buna Seal Assembly, to NW 2, Alum./Buna 0058 Seal Assembly, to NW 0, Alum./Viton O-ring 0058 Seal Assembly, to NW 20, Alum./Viton Seal Assembly, to NW 2, Alum./Viton Seal Assembly, to NW 0, SS/Viton Seal Assembly, to NW 20, SS/Viton Seal Assembly, to NW 2, SS/Viton Metal Hose, Thick Wall, 0,, SS Metal Hose, Thick Wall, 0,, SS Metal Hose, Thick Wall, 0,, SS Metal Hose, Thick Wall, 0,, SS Metal Hose, Thick Wall, 20,, SS Metal Hose, Thick Wall, 20,, SS Metal Hose, Thick Wall, 20,, SS Metal Hose, Thick Wall, 20,, SS MKS Series 27

30 006 Metal Hose, Thick Wall, 40,, SS 006 Metal Hose, Thick Wall, 40,, SS 0065 Metal Hose, Thick Wall, 40,, SS 0066 Metal Hose, Thick Wall, 40,, SS Overpressure Ring, NW 0, 04 SS/Silicone 0060 Overpressure Ring,, 04 SS/Silicone 0060 Overpressure Ring,, 04 SS/Silicone Overpressure Ring,, 04 SS/Silicone Overpressure Ring,, 04 SS/Silicone Adapter, NW 0 to PVC Tubing, 04 SS Adapter, to PVC Tubing, 04 SS Adapter, to PVC Tubing, 04 SS Adapter, to PVC Tubing, 04 SS Adapter, to 2 PVC Tubing, 04 SS 0064 Adapter, to PVC Tubing, 04 SS Adapter, to 2 ASA, w/out groove, 04 SS Adapter, to 2 ASA, w/out groove, 04 SS Adapter, to ASA, w/out groove, 04 SS Adapter, to ASA, w/out groove, 04 SS Adapter, to 2 ASA with groove, 04 SS Adapter, to 2 ASA with groove, 04 SS Adapter, to ASA with groove, 04 SS Adapter, to ASA with groove, 04 SS Adapter, to.5 ASA, w/out groove, 04 SS Adapter, to.5 ASA, w/out groove, 04 SS Adapter, to.5 ASA with groove, 04 SS Adapter, to.5 ASA with groove, 04 SS Adapter Tubing, to, SS, Viton O-Ring Adapter Tubing, to, SS, Viton O-Ring Adapter Tubing, to, SS, Viton O-Ring 0069 Adapter Tubing, to, SS, Viton O-Ring Adapter Tubing, to, SS, Viton O-Ring Adapter Tubing, to, SS, Viton O-Ring Adapter Tubing, to, SS, Viton O-Ring Adapter Tubing, to, SS, Viton O-Ring Centering Ring Assy, NW 0, SS/Silicone O-ring 0070 Centering Ring Assy,, SS/Silicone O-ring 0070 Centering Ring Assy,, SS/Silicone O-ring Centering Ring Assy,, SS/Silicone O-ring Centering Ring Assy,, SS/Silicone O-ring 0070 O-Ring, standard size 2-2, NW 0, Silicone O-Ring, standard size 2-4,, Silicone O-Ring, standard size 2-20,, Silicone O-Ring, standard size 2-26,, Silicone O-Ring, standard size 2-0,, Silicone Metal Hose, Thin Wall, 0,, SS 0074 Metal Hose, Thin Wall, 0,, SS Metal Hose, Thin Wall, 0,, SS Metal Hose, Thin Wall, 0,, SS Metal Hose, Thin Wall, 20,, SS Metal Hose, Thin Wall, 20,, SS Metal Hose, Thin Wall, 20,, SS Metal Hose, Thin Wall, 20,, SS Metal Hose, Thin Wall, 40,, SS Metal Hose, Thin Wall, 40,, SS Metal Hose, Thin Wall, 40,, SS Metal Hose, Thin Wall, 40,, SS Adapter, to NPT-M, 04 SS Adapter, to NPT-M, 04 SS Adapter, to NPT-M, 04 SS Adapter, to NPT-M, 04 SS 0068 Adapter, to NPT-M, 04 SS 0068 Adapter, to NPT-M, 04 SS Adapter, to NPT-M, 04 SS Adapter, to NPT-M, 04 SS Adapter, to NPT-M, 04 SS Adapter, to NPT-M, 04 SS Adapter, to NPT-M, 04 SS 0068 Adapter, to NPT-M, 04 SS Adapter, to NPT-M, 04 SS Adapter, to NPT-M, 04 SS Adapter, to.25 NPT-M, 04 SS Adapter, to.5 NPT-M, 04 SS Adapter, to 2 NPT-M, 04 SS Adapter Tubing, to, SS, Viton O-Ring Adapter Tubing, to, SS, Viton O-Ring Adapter Tubing, to, SS, Viton O-Ring Adapter Tubing, NW 0 to, SS, Viton O-Ring 0069 Adapter Tubing, to, SS, Viton O-Ring 0069 Adapter Tubing, to, SS, Viton O-Ring Adapter Tubing, to, SS, Viton O-Ring Adapter Tubing, to 2, SS, Viton O-Ring Adapter Tubing, to, SS, Viton O-Ring PVC Hose (price per 00 foot), NW 0, PVC PVC Hose (price per 00 foot),, PVC PVC Hose (price per 00 foot),, PVC PVC Hose (price per 50 foot),, PVC PVC Hose (price per 50 foot),, PVC 0080 Weld Socket,, 04 SS 0080 Weld Socket,, 04 SS Weld Socket,, 04 SS Weld Socket,, 04 SS 008 Weld Socket,, 04 SS 0082 Weld Socket,, 04 SS Reducing Tee, to, 04 SS Reducing Tee, to, 04 SS Reducing Tee, to, 04 SS Seal Assembly w/ Screen,, SS/Viton O-ring Seal Assembly w/ Screen,, SS/Viton O-ring Seal Assembly w/ Screen,, SS/Viton O-ring Seal Assembly w/ Screen,, SS/Viton O-ring Elbow, Smooth Radius,, 04 SS Elbow, Smooth Radius,, 04 SS Elbow, Smooth Radius,, 04 SS Elbow, Smooth Radius,, 04 SS 28 MKS Series

31 00880 Toggle Clamp,, fits 6/0, Aluminum Toggle Clamp,, fits 25/20, Aluminum Toggle Clamp,,fits 40/2, Aluminum Toggle Clamp,, fits 50, Aluminum L Toggle Clamp w/ Lanyard,, 6/0, Aluminum L Toggle Clamp w/ Lanyard,, 25/20, Aluminum L Toggle Clamp w/ Lanyard,, 40/2, Aluminum L Toggle Clamp w/ Lanyard,, 50, Aluminum Bulkhead Clamp, 6 Bolts,, Aluminum Bulkhead Clamp, 6 Bolts,, Aluminum Bulkhead Clamp, 6 Bolts,, Aluminum Bulkhead Clamp, 8 Bolts,, Aluminum Bonded Viewport,, SS, Borosilicate Glass Bonded Viewport,, SS, Borosilicate Glass 009 Adapter, VCR-M, to 4 VCR, SS 009 Adapter, VCR-M, to 4 VCR, SS 0095 Adapter, VCR-M, to 4 VCR, SS 0096 Adapter, VCR-M, to 4 VCR, SS 0092 Adapter, VCR-M, to 8 VCR, SS 0092 Adapter, VCR-M, to 8 VCR, SS Adapter, VCR-M, to 8 VCR, SS Adapter, VCR-M, to 8 VCR, SS 009 Adapter, VCR-M, to 2 VCR, SS 0095 Adapter, VCR-M, to 2 VCR, SS 0096 Adapter, VCR-M, to 2 VCR, SS 0092 Adapter, VCR-F, to 4 VCR, SS 0092 Adapter, VCR-F, to 4 VCR, SS Adapter, VCR-F, to 4 VCR, SS Adapter, VCR-F, to 4 VCR, SS Adapter, VCR-F, to 8 VCR, SS Adapter, VCR-F, to 8 VCR, SS Adapter, VCR-F, to 8 VCR, SS Adapter, VCR-F, to 8 VCR, SS 0092 Adapter, VCR-F, to 2 VCR, SS Adapter, VCR-F, to 2 VCR, SS Adapter,VCR-F, to 2 VCR, SS 0090 Adapter Tee, to NPT-F, Aluminum 0090 Adapter Tee, to NPT-F, Aluminum Adapter Tee, to NPT-F, Aluminum Adapter Tee, to NPT-F, Aluminum Adapter Tee, to NPT-F, 04 SS Adapter Tee, to NPT-F, 04 SS Adapter Tee, to NPT-F, 04 SS Adapter Tee, to NPT-F, 04 SS Adapter Tee, to NPT-F, Aluminum Adapter Tee, to NPT-F, Aluminum Adapter Tee, to NPT-F, Aluminum Adapter Tee, to NPT-F, Aluminum Adapter Tee, to NPT-F, 04 SS Adapter Tee, to NPT-F, 04 SS , Blank with Bore, NW 0, 04 SS 00970, Blank with Bore,, 04 SS 00970, Blank with Bore,, 04 SS , Blank with Bore,, 04 SS , Blank with Bore,, 04 SS 00970, Blank with Bore, NW 0, 04 SS 0097, Blank with Bore,, 04 SS 0097, Blank with Bore,, 04 SS 00975, Blank with Bore,, 04 SS 00976, Blank with Bore,, 04 SS , Blank with Bore, NW 0, 04 SS 00972, Blank with Bore,, 04 SS 00972, Blank with Bore,, 04 SS , Blank with Bore,, 04 SS , Blank with Bore,, 04 SS 0097, Blank with Bore,, 04 SS 0097, Blank with Bore,, 04 SS 00975, Blank with Bore,, 04 SS 00976, Blank with Bore,, 04 SS 00974, Blank with Bore,, 04 SS , Blank with Bore,, 04 SS , Blank with Bore,, 04 SS , Blank with Bore,, 04 SS , Blank with Bore,, 04 SS , Blank with Bore,, 04 SS 00980, Blank with Bore, NW 80, 04 SS , Blank-Off, NW 80, 04 SS 00980, Blank with Bore, NW 00, 04 SS , Blank-Off, NW 00, 04 SS Metal Hose, Thin Wall, 2,, SS Metal Hose, Thin Wall, 2,, SS Metal Hose, Thin Wall, 2,, SS Metal Hose, Thin Wall, 24,, SS Metal Hose, Thin Wall, 24,, SS Metal Hose, Thin Wall, 24,, SS 0098 Metal Hose, Thin Wall, 24,, SS Metal Hose, Thin Wall, 2,, SS Adapter, to 2 CF, 04 SS 0098 Adapter, to 2 CF, 04 SS Reducing Tee, to, 04 SS Reducing Tee, to, 04 SS Reducing Tee, to, 04 SS Seal Assembly, NW 80, SS/Viton O-ring Seal Assembly, NW 00, SS/Viton O-ring Seal Assembly, NW 80, Aluminum/Viton O-ring Seal Assembly, NW 00, Aluminum/Viton O-ring Seal Assembly, NW 80, Aluminum/Buna-N O-ring Seal Assembly, NW 00, Aluminum/Buna-N O-ring Adapter Tee, to NPT-F, 04 SS Adapter Tee, to NPT-F, 04 SS MKS Series 29

32 Numerical Listing O-Ring, standard size 2-40, NW 80, Buna-N O-Ring, standard size 2-46, NW 00, Buna-N O-Ring, standard size 2-40, NW 80, Viton O-Ring, standard size 2-46, NW 00, Viton Step Adapter, NW 6 to, SS Step Adapter, NW 80 to, SS Step Adapter, NW 80 to, SS Step Adapter, NW 6 to, SS Step Adapter, NW 00 to, SS Step Adapter, NW 00 to, SS Tube (price per 0 foot), NW 80,.00 O.D., SS Tube (price per 0 foot), NW 00, 4.00 O.D., SS Tube (price per 0 foot), NW 00, 4.00 O.D., SS Conical Adapter, NW 6 to, SS Conical Adapter, NW 80 to, SS Conical Adapter, NW 80 to, SS Conical Adapter, NW 6 to, SS Conical Adapter, NW 00 to, SS Overpressure Seal Assy,, SS/Viton Overpressure Seal Assy,, SS/Viton Overpressure Seal Assy,, SS/Viton Chain Clamp, NW 80, Aluminum Chain Clamp, NW 00, Aluminum MKS Instruments, Inc. Global Headquarters 2 Tech Drive, Suite 20 Andover, MA 080 Tel: Tel: (in USA) Web: MKS Instruments, Inc. Integrated Process Solutions 50 Sterling Drive Boulder, CO 800 Tel: Tel: (in USA) Series ISO-KF Components - / MKS Instruments, Inc. All rights reserved. MKS products provided subject to the US Export Regulations. Diversion or transfer contrary to US law is prohibited. Specifications are subject to change without notice. mksinst is a trademark of MKS Instruments, Inc., Viton and Teflon are registered trademarks of E.I. DuPont de Nemours & Co., Inc., VCR is a registered trademark of Swagelok Marketing Co, Solon, OH.

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant). Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)

More information

These features have made Lo Torc valves the choice of high pressure plug value users, worldwide:

These features have made Lo Torc valves the choice of high pressure plug value users, worldwide: LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have

More information

Cajon VCR Fittings. Flanges, Fittings, & Components. Cajon & Swagelok Fittings. Cajon VCR Fittings. Nuts, Caps, & Plugs. Socket Weld Glands

Cajon VCR Fittings. Flanges, Fittings, & Components. Cajon & Swagelok Fittings. Cajon VCR Fittings. Nuts, Caps, & Plugs. Socket Weld Glands Cajon VCR Fittings Cajon VCR Fittings Make excellent low-pressure gas connections Ideal for lecture bottle gas cylinders, standard helium checks, and general gas plumbing Withstand bakeout to 58º C (with

More information

GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES

GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today

More information

Pipe Thread Types and Designations

Pipe Thread Types and Designations Pipe Thread Types and Designations Overview: Different types of screw threads have evolved for fastening, and hydraulic systems. Of special concern are plastic-to-metal, taper/parallel threaded joints

More information

Chief S21M PARTS MANUAL. 2005 Chief Automotive Technologies

Chief S21M PARTS MANUAL. 2005 Chief Automotive Technologies Chief SM 00 Chief Automotive Technologies Chief s Limited One-Year Warranty & Liability CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies, Inc. warrants for one year from date

More information

Introduction to vacuum gauges. Vacuum Gauges where the Pressure Readings are Independent of the Type of Gas (Mechanical Vacuum Gauges)

Introduction to vacuum gauges. Vacuum Gauges where the Pressure Readings are Independent of the Type of Gas (Mechanical Vacuum Gauges) Introduction to vacuum gauges Vacuum Gauges where the Pressure Readings are Independent of the Type of Gas (Mechanical Vacuum Gauges) BOURDON Vacuum Gauge The inside of a tube which is bent into a circular

More information

Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997

Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997 Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47

More information

Trouble shooting guide

Trouble shooting guide guide DPR/PSR Leak Insuffi ciently tightened, shallow bite Tighten the nut according to correct number of turns, direct assembly only for maintanance/repair, use of recommended pre-assembly machines Mark

More information

GEET Fuel Processor Plans

GEET Fuel Processor Plans GEET Fuel Processor Plans This is a greatly simplified Proof of Concept version of the GEET Fuel Processor that just about anyone can build from parts from a local Hardware store in a weekend for very

More information

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family

More information

SERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)

SERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC) APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines

More information

Power Cube Open Source Ecology Page 1. Power Cube. Version 4

Power Cube Open Source Ecology Page 1. Power Cube. Version 4 Power Cube Open Source Ecology Page 1 Power Cube Version 4 Power Cube Open Source Ecology Page 2 Contents Table of Contents Power Cube... 1 Contents...2 Introduction... 3 Bill Of Materials...4 Discrete

More information

BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS

BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS PLEASE READ COMPLETE INSTRUCTIONS BEFORE YOU BEGIN LEAVE INSTALLATION INSTRUCTIONS AND USER'S GUIDE WITH OWNER ALL ELECTRIC WIRING AND PLUMBING MUST BE DONE

More information

Working Pressure - Hose Ends

Working Pressure - Hose Ends Working Pressure - Hose Ends The maximum dynamic working pressure of a hose assembly is the lesser of the rated working pressure of the hose and the end connection used. HIGH SPECIALTY HOSE ACCESSORRIES

More information

MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION

MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br

More information

Uni-Quick Duct System. Moveable. Uni-Quick. Duct System. DUST COLLECTION and MATERIAL HANDLING APPLICATIONS a McGill AirFlow product

Uni-Quick Duct System. Moveable. Uni-Quick. Duct System. DUST COLLECTION and MATERIAL HANDLING APPLICATIONS a McGill AirFlow product United McGill products Uni-Quick TM An enterprise of United McGill Corporation Family owned and operated since 1951 Moveable Duct System DUST COLLECTION and MATERIAL HANDLING APPLICATIONS a McGill AirFlow

More information

TY-FLO Needle Valves

TY-FLO Needle Valves Design/Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.17 to.438 in. Flow Coefficients (C V ) from.37 to.7 Straight or angle flow patterns Optional panel mount Handle options available Non-wetted

More information

Hose Clamps & Fittings

Hose Clamps & Fittings All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw

More information

Standard Bills of Materials Commonly Ordered Models Only

Standard Bills of Materials Commonly Ordered Models Only Standard Bills of Materials Commonly Ordered Models Only Meters Always check www.lcmeter.com for the most current BOM. This document is for reference only. Always use Bill of Material shipped with meter

More information

60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING

60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING 60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed

More information

POWERS Controls No. 4 Pneumatic Damper Actuator

POWERS Controls No. 4 Pneumatic Damper Actuator POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000

More information

with installation dynafact boost GAUGE this manual is for use with systems 64050-64054

with installation dynafact boost GAUGE this manual is for use with systems 64050-64054 owners manual with installation instructions dynafact boost GAUGE this manual is for use with systems 64050-64054 GENERAL INSTALLATION PRACTICES This manual is an installation guide for all 1. Banks DynaFact

More information

SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS

SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS PART 1 GENERAL 1.01 SECTION INCLUDES A. The requirements for pipe material and installation in sewer and drainage collection systems. All materials

More information

Stainless Steel Valves For the Sanitary Industries

Stainless Steel Valves For the Sanitary Industries www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves

More information

Stainless Steel Single and Dual Circulation Kits

Stainless Steel Single and Dual Circulation Kits Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating

More information

Rated Burst Pressure 200 Series: 2.5 : 1 H200 Series: 4 : 1

Rated Burst Pressure 200 Series: 2.5 : 1 H200 Series: 4 : 1 200 Series 0 to 3000 psig heck Valves H200 Series 0 to 6000 psig heck Valves Features & enefits Quick opening/positive closing Provides a wide range of adaptability Large flow capacity The patented sealing

More information

Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.

Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves. Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire

More information

TYPE E Main Valve Sizes 3 /8 through 12

TYPE E Main Valve Sizes 3 /8 through 12 SD 3001F PRINTED IN U.S.A. SD 3001F/0707 A B TYPE E MAIN VALVE C D E TYPE E Main Valve Sizes 3 /8 through 12 The Spence Type E Main Valve is of normally closed, single seat design featuring packless construction,

More information

James M. Pleasants Company

James M. Pleasants Company James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:

More information

Submersion/Insertion Toroidal Sensor

Submersion/Insertion Toroidal Sensor Instruction Sheet PN 51A-228/rev.P December 2010 Model 228 Submersion/Insertion Toroidal Sensor For additional information, please visit our website at www.emersonprocess.com/raihome/liquid/. CAUTION SENSOR/PROCESS

More information

Fixtures - Parts - Accessories to shampoo bowls

Fixtures - Parts - Accessories to shampoo bowls Page 1??? - For what brand of bowl do you need parts??? Find out by looking on the bottom of the bowl, between the front and strainer, where molded in the bottom is the brand and model number. For example,

More information

Mueller. Pipe Repair Products. Saddles Tapping Sleeves Pipe Repair Clamps A complete selection for all types of pipe... all from a single source.

Mueller. Pipe Repair Products. Saddles Tapping Sleeves Pipe Repair Clamps A complete selection for all types of pipe... all from a single source. Mueller Pipe Repair Products Saddles Tapping Sleeves Pipe Repair Clamps A complete selection for all types of pipe... all from a single source. SERVICE SADDLES Mueller service saddles, available in bronze,

More information

TWO-WAY DIVERTER WITH THREE-WAY HAND SHOWER

TWO-WAY DIVERTER WITH THREE-WAY HAND SHOWER TWO-WAY DIVERTER WITH THREE-WAY HAND SHOWER 1. BEFORE YOU BEGIN A. HOW TO USE THESE INSTRUCTIONS Please read these instructions carefully to familiarize yourself with the required tools, materials, and

More information

Ocean Engineering Technical Data Sheet Stuffing Tubes

Ocean Engineering Technical Data Sheet Stuffing Tubes Ocean Engineering Technical Data Sheet Stuffing Tubes Stuffing tubes are devices used to allow a wire or cable to pass through a wall or bulkhead and protect components from the outside environment. Many

More information

Chief EZ Liner S21 PARTS MANUAL. 1999 Chief Automotive Systems, Inc.

Chief EZ Liner S21 PARTS MANUAL. 1999 Chief Automotive Systems, Inc. Chief EZ Liner S21 R 1999 Chief Automotive Systems, Inc. CHIEF EZ LINER CHIEF S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Systems, Inc. warrants for one year from date of installation and/or

More information

Toroidal Conductivity Sensor

Toroidal Conductivity Sensor Instruction Sheet PN 51A-/rev.C June 2012 Toroidal Conductivity Sensor For additional information, please visit our website at www.emersonprocess.com/rosemountanalytical.com SPECIFICATIONS Wetted Materials:

More information

Shut-off & Lockout Valves 1/4" to 1-1/2" port size

Shut-off & Lockout Valves 1/4 to 1-1/2 port size Section 16 Shut-off & Lockout Valves 1/4" to 1-1/2" port size Contents T72 Excelon Shut-off & Lockout Valves 1/4", 3/8" Port Sizes....................................ALE-16-2 T73 Excelon Shut-Off & Lockout

More information

Mueller. Pipe Repair Products. A complete selection for all types of gas lines... all from a single source. GAS PRODUCTS DIVISION

Mueller. Pipe Repair Products. A complete selection for all types of gas lines... all from a single source. GAS PRODUCTS DIVISION Mueller Pipe Repair Products A complete selection for all types of gas lines... all from a single source. GAS PRODUCTS DIVISION MUELLER STAINLESS STEEL REPAIR CLAMPS Mueller offers a full line of stainless

More information

TRANS-05, Torque Tube Removal, Rebuilding, and Installation

TRANS-05, Torque Tube Removal, Rebuilding, and Installation TRANS-05, Torque Tube Removal, Rebuilding, and Installation Tools Metric Wrench Set Metric Socket Set Jack Stands (6 minimum) Floor Jack 8mm Cheesehead socket (also referred to as 12 point internal socket

More information

FITTINGS 5-01. 82A series Aluminium (light weight) compression fittings Ø 6... 42 mm tube size, BSPP and BSPT thread

FITTINGS 5-01. 82A series Aluminium (light weight) compression fittings Ø 6... 42 mm tube size, BSPP and BSPT thread FITTINS 82 series luminium (light weight) compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 82 series rass compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 83 series luminium

More information

Slide the new steering column shaft through the steering column from the driver compartment.

Slide the new steering column shaft through the steering column from the driver compartment. Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.

More information

3. SEISCO PARTS & SERVICE REMOVAL AND REPAIR GUIDE

3. SEISCO PARTS & SERVICE REMOVAL AND REPAIR GUIDE 4 3. SEISCO PARTS & SERVICE REMOVAL AND REPAIR GUIDE A. Changing the Control Board B. Replacing a Heating Element C. Thermistor Replacement D. High Limit Switch Replacement E. Level Detector Replacement

More information

NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE

NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY

More information

For additional information, please visit our website at www.emersonprocess.com/raihome/liquid/.

For additional information, please visit our website at www.emersonprocess.com/raihome/liquid/. Instruction Sheet PN 51A-499AOZ/rev.H September 2010 Model 499A OZ Ozone Sensor For additional information, please visit our website at www.emersonprocess.com/raihome/liquid/. CAUTION SENSOR/PROCESS APPLICATION

More information

MVX-Series Diesel Engine Air Shut Down Valves

MVX-Series Diesel Engine Air Shut Down Valves MVX-Series Diesel Engine Air Shut Down Valves (Cable operated closure/integral reset lever types) Selection, Application and Maintenance SPECIAL VALVE MVX-304 This is a special version of valve type MVX-303

More information

HOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS ELECTRICAL SAFETY CONTROLS

HOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS ELECTRICAL SAFETY CONTROLS HOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS PNEUMATIC SAFETY CONTROLS BASIC CONTROLS SC3000 - SELF CONTAINED 2 HAND CONTROL - STAND ALONE MODEL SC3300 - SELF CONTAINED 2 HAND CONTROL - PRESS READY

More information

CW-4622 INSTALLATION INSTRUCTIONS CB-4622 RISER KIT TO SUIT BLACK LEVER EXPOSED VALVES & BATH/SHOWER VALVES

CW-4622 INSTALLATION INSTRUCTIONS CB-4622 RISER KIT TO SUIT BLACK LEVER EXPOSED VALVES & BATH/SHOWER VALVES INSTALLATION INSTRUCTIONS CB-4622 RISER KIT TO SUIT BLACK LEVER EXPOSED VALVES & BATH/SHOWER VALVES CW-4622 RISER KIT WITH WHITE LEVER DIVERTER TO SUIT EXPOSED VALVES & BATH/SHOWER VALVES CB-4622 CW-4622

More information

Trace Dissolved Oxygen Sensor

Trace Dissolved Oxygen Sensor Instruction Sheet PN 51A-499ATRDO/rev.G September 2010 Model 499A TrDO Trace Dissolved Oxygen Sensor For additional information, please visit our website at www.emersonprocess.com/raihome/liquid/. CAUTION

More information

Model Specification 509 DRISCOPLEX 4200 and DRISCOPLEX 4300 Gravity Flow Sanitary Sewer

Model Specification 509 DRISCOPLEX 4200 and DRISCOPLEX 4300 Gravity Flow Sanitary Sewer Model Specification 509 DRISCOPLEX 4200 and DRISCOPLEX 4300 Gravity Flow Sanitary Sewer The user may choose to adopt part or all of this Model Specification; however, the user should ensure that all parts

More information

PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta

PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved

More information

SOFT START VACUUM VALVES. Vacuum Valves. Two-Stage Valves

SOFT START VACUUM VALVES. Vacuum Valves. Two-Stage Valves SOFT START AUU AES W W W. K S I S T. O acuum alves Two-Stage alves Features and Benefits Provides soft pumpdown and isolation of your vacuum system Reduces particulate contamination during early turbulent

More information

Machine Screws, Dowel Pins and Hardware

Machine Screws, Dowel Pins and Hardware Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-

More information

HOSE, TUBE, AND PIPE CLAMPS

HOSE, TUBE, AND PIPE CLAMPS hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions

More information

LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions

LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment

More information

Ozone Sensor. Model 499A OZ CAUTION CAUTION. Instruction Sheet PN 51A-499AOZ/rev.F January 2007

Ozone Sensor. Model 499A OZ CAUTION CAUTION. Instruction Sheet PN 51A-499AOZ/rev.F January 2007 Instruction Sheet PN 51A-499AOZ/rev.F January 2007 Model 499A OZ Ozone Sensor For additional information, please refer to the Instruction Manuals CD shipped with this product, or visit our website at www.emersonprocess.com/raihome/liquid/.

More information

Universal Installation and Maintenance Instructions Double Wall Spill Containment Bucket (5 and 15 gal)

Universal Installation and Maintenance Instructions Double Wall Spill Containment Bucket (5 and 15 gal) Universal Installation and Maintenance Instructions Double Wall Spill Containment Bucket (5 and 15 gal) IMPORTANT: It is imperative that the user read these warnings and use of the assembly instructions

More information

DANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information

DANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information Safety Safety Is Your Responsibility DANGER To avoid personal injury or death, carefully read and understand all instructions pertaining to the Anthony Liftgates product. Do not attempt to install, operate,

More information

Constantemp Double Wall Low pressure steam-water Heater F-340LDW,F-640LDW, F-940LDW and F-1240LDW

Constantemp Double Wall Low pressure steam-water Heater F-340LDW,F-640LDW, F-940LDW and F-1240LDW Installation, Operating and Maintenance Instructions 90/4.5.5 Rev. 0 Constantemp Double Wall Low pressure steam-water Heater F-340LDW,F-640LDW, F-940LDW and F-1240LDW Table of Contents SECTION I... 2 INSTALLATION...

More information

IF IT FLOWS THE BOWIE PUMP CAN PUMP IT

IF IT FLOWS THE BOWIE PUMP CAN PUMP IT IF IT FLOWS THE BOWIE PUMP CAN PUMP IT Bowie Industries, Inc. Bowie, TX 76230 USA Page 1 Bowie Pumps Manual General Pump Information..Page 2 300 Series Pumps.. Page 5 400 Series Pumps.Page 11 500 Series

More information

Drive shaft, servicing

Drive shaft, servicing Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Application Outboards Faria 5 Gauge Set* Publication No. Description Part Number Honda Code PII53606A White faced, flat lens 06300-ZW5-010ZB 6315410 Issue Date Black faced, flat

More information

300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS

300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS Section: MOYNO 500 PUMPS Page: 1 of 8 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS Mechanical Seal Models Packing Gland Models MODELS DESIGN FEATURES

More information

OPERATION AND MAINTENANCE MANUAL 5-1/4 B-84-B-5 FIRE HYDRANT

OPERATION AND MAINTENANCE MANUAL 5-1/4 B-84-B-5 FIRE HYDRANT OPERATION AND MAINTENANCE MANUAL 5-1/4 B-84-B-5 FIRE HYDRANT INDEX AMERICAN - DARLING 5-1/4 IN. B-84-B-5 FIRE HYDRANT OPERATION AND MAINTENANCE MANUAL OPERATION AND MAINTENANCE REPAIRS Operation and Maintenance...

More information

ROUGHNECK II Pumpless Drain

ROUGHNECK II Pumpless Drain SERVICE BULLETIN SB4027 Rev. I 1/11 For Used Oil Only ROUGHNECK II Pumpless Drain Model #4110-022 FOR USED OIL ONLY (Black) For Antifreeze Only Model #4110-023 FOR USED ANTIFREEZE ONLY (Green) Patent #

More information

The "DAVID" Steam Engine By Alan Marconett Hobbit Engineering HTTP://WWW.HobbitEngineering.com Alan@HobbitEngineering.

The DAVID Steam Engine By Alan Marconett Hobbit Engineering HTTP://WWW.HobbitEngineering.com Alan@HobbitEngineering. The "DAVID" Steam Engine By Alan Marconett Hobbit Engineering HTTP://WWW.HobbitEngineering.com Alan@HobbitEngineering.com (c) 2/20/03 The David steam engine is a simple oscillating steam engine, many plans

More information

Engineering Specifications

Engineering Specifications PUREFLOW PEX PRODUCTS PART 1 GENERAL 1.1 SUMMARY 1.1.1 This specification covers Branch & Main, Parallel Water Distribution Systems (MANABLOC), Cross-linked Polyethylene tubing and fittings using PEX Press

More information

Installation Instructions 6028.801

Installation Instructions 6028.801 DAZZLE Installation Instructions 08.80 Spread Lavatory Faucet with Speed Connect Drain* Congratulations on purchasing your American Standard faucet with Speed Connect drain, a feature found only on American

More information

A&A CORVETTE PERFORMANCE C6 BOOST & FUEL GAUGE INSTALLATION INSTRUCTIONS

A&A CORVETTE PERFORMANCE C6 BOOST & FUEL GAUGE INSTALLATION INSTRUCTIONS A&A CORVETTE PERFORMANCE C6 BOOST & FUEL GAUGE INSTALLATION INSTRUCTIONS 1. Check your gauges before you take them out of the packaging to make sure they are at 0 (zero) psi for both boost and fuel pressure.

More information

SureSite Magnetic Liquid Level Indicator

SureSite Magnetic Liquid Level Indicator SureSite Magnetic Liquid Level Indicator Instruction Bulletin No. 177664-1 (Rev. E) Section 1: Weldments Thank you for purchasing the GEMS SureSite Magnetic Level Indicator. Please read this document prior

More information

Structural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the A325 structural bolt. Rev.

Structural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the A325 structural bolt. Rev. Structural Bolting ASTM A325 and ASTM A490 are the two U.S. standard structural bolts. When looking at the mechanical requirements of bolts it appears that an ASTM A325 and SAE J429 Grade 5 are identical

More information

Two most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:

Two most common lock nut groups: 1-Prevailing Torque Type Lock Nuts: Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen

More information

Medium Pressure Diaphragm Pumps

Medium Pressure Diaphragm Pumps Medium Pressure Diaphragm Pumps Installation, Operation, Repair, and Parts Manual Description Form L-1382 (10/15, Rev. D) California Proposition 65 Warning -- This product and related accessories contain

More information

Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001

Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from

More information

Application Data Important Safety Information

Application Data Important Safety Information Application Data Important Safety Information Read this page before using any of the information in this catalog. This catalog is designed to be used as a guide in selecting the proper hose for the applications

More information

CHEXTER TM FITS YOUR APPLICATION, PROFITABLY

CHEXTER TM FITS YOUR APPLICATION, PROFITABLY CHEXTER TM FITS YOUR APPLICATION, PROFITABLY Commercial Construction CHEXTER TM Check Valves are economically used in chilled and hot water air conditioning systems, refrigeration and other piping and

More information

System Accessories Pricing. Page 0 Effective 7/02

System Accessories Pricing. Page 0 Effective 7/02 System Accessories Pricing Page 0 Effective 7/02 Firetrace Tubing 200005 Firetrace Detection Tubing (FDT) (Per Foot) (Available in continuous lengths up to 333 ft.) Accessories 400001 400004 400061 400060

More information

Pipe Valves, Fittings and Nipples Pressures to 15,200 psi

Pipe Valves, Fittings and Nipples Pressures to 15,200 psi Pipe Valves, Fittings and Nipples MAXIMATOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by

More information

One Year Warranty. Stock U.S. # of Volts Weight CONN. Height Dia. Watts # GAL. Elements INS. Inches NATURAL GAS* Six Year Warranty

One Year Warranty. Stock U.S. # of Volts Weight CONN. Height Dia. Watts # GAL. Elements INS. Inches NATURAL GAS* Six Year Warranty One Year Warranty ELECTRIC Stock U.S. # of Volts Weight CONN. Height Dia. Watts # GAL. Elements INS. Inches Fused Ceramic Shield tank lining is corrosion-resistant for years of dependability. Adjustable

More information

SIMPLAIR PIPING. www.irtools.com 1-800-376-TOOL

SIMPLAIR PIPING. www.irtools.com 1-800-376-TOOL SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.

More information

800-348-8467 www.fittingsunlimited.com

800-348-8467 www.fittingsunlimited.com Thread and Port Identification Guide 800-348-8467 www.fittingsunlimited.com INDEX Index... 1 Explanation of Symbols... 2 How to Measure Threads... 3-4 Metric vs English Threads... 5 North American Connections

More information

TECHNO Multi-Purpose Check Valves for Industry

TECHNO Multi-Purpose Check Valves for Industry Multi-Purpose Check Valves for Industry THE SHORT FORM (SF) WAFER IS THE PERFECT DESIGN FOR AIR SERVICE AND LIGHT DUTY LIQUID APPLICATIONS. AVAILABLE IN SIZES 1-72 MALE THREADED ENDS, GROOVED ENDS, PLAIN

More information

American- Darling 5¼" B-84-B-5.

American- Darling 5¼ B-84-B-5. -5 Sealed Lubrication Chamber Seals operating threads from water and debris which greatly reduces routine maintenance. Top Travel Stop Nut Helps prevent stem buckling and damage to bronze components which

More information

TECHNICAL ASSISTANCE TOLL FREE TELEPHONE NUMBER 1.800.591.9360 TECHNICAL ASSISTANCE FAX: 1.626.855.4894

TECHNICAL ASSISTANCE TOLL FREE TELEPHONE NUMBER 1.800.591.9360 TECHNICAL ASSISTANCE FAX: 1.626.855.4894 ACORN SAFETY P.O. BOX 3527 CITY OF INDUSTRY, CA 9744-0527 UNITED STATES OF AMERICA WWW.ACORNSAFETY.COM INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS FREEZE RESISTANT WALL MOUNTED EMERGENCY EYEWASH

More information

Valu Guide Sheaths. Valu Guide Inserts. Optional Valu Guide Inserts. Typical Properties of Valu Guide Rail. and Hardware.

Valu Guide Sheaths. Valu Guide Inserts. Optional Valu Guide Inserts. Typical Properties of Valu Guide Rail. and Hardware. 14 gauge stainless steel The Original, Long Life Sanitary Guide Rail Valu Guide rail incorporates two outstanding materials: stainless steel and UHMW. The 14 ga. stainless steel sheath provides rigid streamlined

More information

MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK

MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK 1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD

More information

Copper and Copper Alloy Tube, Pipe and Fittings

Copper and Copper Alloy Tube, Pipe and Fittings Copper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification

More information

MFH-5057 Ford Small-Block V-8 Fresh Water Cooling Kit Instructions

MFH-5057 Ford Small-Block V-8 Fresh Water Cooling Kit Instructions MFH-5057 Ford Small-Block V-8 Fresh Water Cooling Kit Instructions MONITOR PRODUCTS, INC. 15400 Flight Path Dr Brooksville, FL 34604 Tel: 1-800-334-4591 or 352-544-2620 Sales: ext 201 Technical Support:

More information

INSTALLATION INSTRUCTIONS for INSIGHT FIBER OPTIC FLAME SCANNERS

INSTALLATION INSTRUCTIONS for INSIGHT FIBER OPTIC FLAME SCANNERS CU-101 DECEMBER 3, 2015 INSTALLATION INSTRUCTIONS for INSIGHT FIBER OPTIC FLAME SCANNERS APPLICATION The FIREYE fiber optic scanners have been designed for installation on burners where movable vanes,

More information

Replacement parts. WM97+ gas-fired water boiler Boiler Manual. OBTAIN PARTS ONLY THROUGH WEIL-McLAIN THE BOILER CONTAINS CERAMIC FIBER MATERIALS

Replacement parts. WM97+ gas-fired water boiler Boiler Manual. OBTAIN PARTS ONLY THROUGH WEIL-McLAIN THE BOILER CONTAINS CERAMIC FIBER MATERIALS Replacement parts DO NOT SERVICE THE BOILER WITHOUT A WM97+ MAINTENANCE KIT AVAILABLE Failure to adhere to these guidelines can result in severe personal injury, death or substantial property damage. The

More information

Many Products...One Source

Many Products...One Source PRESSURE GAUGES Dedicated Sales Rep for Your Area 97%Fill Rate Shipping within 24 Hours State of the Art Warehouse System Technical Support Quality Control Program 25 Whaley Avenue Milverton, Ontario N0K

More information

25-kV Apparatus Bushings B Series (bolt-in) for Elbow to Air-Insulated Service 200 Amp, 600 Amp and 1250 Amp

25-kV Apparatus Bushings B Series (bolt-in) for Elbow to Air-Insulated Service 200 Amp, 600 Amp and 1250 Amp Page 1 2015 Grounded Metal Equipment Plate Equipment Connection Bus Bar or Other Component 15 kv or 25 kv Separable Insulated Connector (elbow) Equipment Connection Power Cable Power Cable Grounded Metal

More information

TAMPERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.

TAMPERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A. TAMPERS Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1064 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Check the tamping butt lock screw, it must be tightened

More information

Spill Containment Manholes

Spill Containment Manholes Spill Containment Manholes 1-2100 Series OPW and Pomeco Spill Containment Manholes are designed to prevent spilled product from entering the soil near the fill and vapor return riser connections on underground

More information

ball valves Flomite 71 Series 2-way Integral Panel Mount Ball Valves

ball valves Flomite 71 Series 2-way Integral Panel Mount Ball Valves 2-way Integral Panel Mount Ball Valves Used for quick on-off service with a visual indication of flow, HOKE s 2-way ball valves offer orifice sizes up to 0.25 (6.4mm). Flomite valves feature a floating

More information

Ford Service Saddles and Tapping Sleeves

Ford Service Saddles and Tapping Sleeves THE FORD METER BOX COMPANY, INC. ISO 9001:2008 10002505 Section AA 02/2015 Web Revision 12/17/2015 Ford Service Saddles and Tapping Sleeves Contents Page Recommended Product Application *Steel *C900 Cast

More information

relief valves 500 Series Adjustable Popoff & Inline Relief Valves 0.5 to 150 psig (10 bar)

relief valves 500 Series Adjustable Popoff & Inline Relief Valves 0.5 to 150 psig (10 bar) Adjustable Popoff & Inline Relief Valves 0.5 to 150 psig (10 bar) How it Works Closed Resilient seal design prevents leakage. Sealing efficiency increase with increased pressure up to cracking pressure.

More information

KF Needle & Gauge Valves

KF Needle & Gauge Valves KF Needle & Gauge Valves Superior Fluid Control Products KF O-Ring & Packed Stem Style Needle Valves KF Needle Valves combine rugged construction, dependability and leak-free performance at high and low

More information

1. Lay out 2 pieces of 7/8" tubing and mark for bending as shown. Remember that the bend is in the shaded area as shown below in Figure 1.

1. Lay out 2 pieces of 7/8 tubing and mark for bending as shown. Remember that the bend is in the shaded area as shown below in Figure 1. MINI BIKE PLANS Page 1 INTRODUCTION Before starting to build your Mini-Bike, be sure that you have all the parts shown on the material list. You will note that tubing has been used in the construction.

More information

DODGE USAF 200/300 Direct Mount Pillow Block Bearings

DODGE USAF 200/300 Direct Mount Pillow Block Bearings DODGE USAF 200/300 Direct Mount Pillow Block Bearings These instructions must be read thoroughly before installation or operation. WARNING: To ensure that drive is not unexpectedly started, turn off and

More information