Earphones and Accessories

Transcription

1 Earphones and Accessories Single Ear Bud Part Number: LA-161 Economical, low cost hearing option. (Specify LA-163). Maximum Input 30 mw Part Number: LA-162 (specify LA-163). Economical cost hearing option. Dual Ear Bud Maximum Input 30 mw maximum Ear Bud Replacement Cushions Part Number: LA-163 Package of 20. Fits LA-161 Single Ear Bud and LA-162 Dual Ear Buds. Earphones and Accessories Page 1

2 Part Number: LA-164 Single ear clip that doesn t mess up hair. Easily cleaned (solid plastic speaker). Strong volume output. Ear Speaker Part Number: LA-165 Dual ear over-the-head style. Traditional headset design. (specify LA-167). The earphone cord works as the receiver s antenna. Stereo Headphones Impedance 32 Ohm +/-15% 3.5 mm stereo Weight 5 oz. (142 g) Neck Loop Part Number: LA-166 Use with any hearing aid equipped with a T coil. The receiver s antenna is built in to the Impedance 12 Ohm +/-15% Maximum Input 2 W (75mW nominal) Cable Length 37 in. (94 cm) Circumference 16 in. (41 cm) from base of loop coil Earphones and Accessories Page 2

3 Part Number: LA-167 Package of 10. Fits LA-165 Stereo Headset. Replacement Cushions for Stereo Headphones (10) Part Number: LA-168 Use with Listen Stereo Headsets (LA-165) FDA approved sanitary cover for ear cushions. Package of 10 Sanitary Covers for Stereo Headphones (10) Behind-the-Head Stereo Headphones Part Number: LA-170 Dual ear output. Behind-the-Head design allows usage with hard hats and doesn t mess up hair. (specify LA-167) The earphone cord works as the receiver s antenna. 3.5 mm stereo Weight 5 oz. (142 g) Earphones and Accessories Page 3

4 Over-the-Head Microphone and w/earphone Part Number: LA-272 Use with Listen s LT-700 Portable Transmitter and Listen Receivers or other audio input. Two 3.5 mm s - one for the microphone and the other for the earphone. Picks up voice and transmits to receivers. Uni-directional mic picks up audio from only one direction. Superior aural performance. Ideal for unobtrusive placement and high performance. Directional microphone picks up audio directly in front of the mic. Does not pick up unwanted audio and noise in all directions The transmitter and receiver antenna is built in to this microphone/headphone cord. Impedance Less than 2.2K ohm Phantom Power 3 VDC required Weight 8 oz. (227 g) Part Number: LA-265 Used to provide direct audio feed to a consumer camcorder or other recording device. Portable Receiver Consumer Camcorder Cable s Male 3-pin XLR and male 3.5 mm stereo In-line Resister Pad 40 db Cable Length 4 ft. (121 cm) Part Number: LA-266 Used to provide direct audio feed to a professional camcorder or other recording device. Portable Receiver Professional Camcorder Cable s In-line Resister Pad Cable Length Male 3-pin XLR and male 3.5 mm stereo 40 db 4 ft. (121 cm) Earphones and Accessories Page 4

5 Part Number: DH-6021 Durable reinforced cable. Special designed for speech intelligibility. Replaceable ear pads. DIS Stereo Headphones Frequency response Loudspeaker maximum power Load Rating 35 Hz - 15 khz 600 Ohm 86 1 khz 100 mw Distortion <1.5% Headphone One (1) 90 male 3.5 mm (0.14 in.) stereo Unit Weight 1.94 oz. (55 g) Part Number: DH-6023 Super light weight. Stethoscope style for minimum discomfort to the delegate. Replaceable ear pads. DIS Stethoscope Stereo Headphones Frequency Response Max input level 100 Hz - 4 khz 32 Ohm 20 mva Headphone One 91) 90 male 3.5 mm (0.14) stereo Unit Weight 0.63 oz. (18 g) Part Number: DH-6025 Lightweight. Replaceable ear pad. DIS Clip Headphones Freqency Response Max input level 100 Hz - 4kHz 32 Ohm 10mVA Headphone One (1) 90 male 3.5 mm (0.14 in.) Unit Weight 0.35 oz. (10 g) Earphones and Accessories Page 5