9926 Series Branch Rated Circuit Breakers AC Version
|
|
- Baldric Briggs
- 7 years ago
- Views:
Transcription
1 Branch Rated AC Version Hydraulic Magnetic Single pole and double pole versions 20/240 VAC, 50/60 Hz Up to 25A Just 3 mm wide Mounts on 35mm DIN-rail UL 489 listed, CSA C22.2 No. 5-02, CE VDE Ordering Data : : (amps) TS 35 Description (amps) TS 35 Description QL--3-DM-KM QL-2-3-DM-KM QL--3-DM-KM QL-2-3-DM-KM QL--3-DM-KM QL-2-3-DM-KM QL--3-DM-KM QL-2-3-DM-KM QL--3-DM-KM QL-2-3-DM-KM QL--3-DM-KM QL-2-3-DM-KM QL--3-DM-KM QL-2-3-DM-KM QL--3-DM-KM QL-2-3-DM-KM QL--3-DM-KM QL-2-3-DM-KM QL--3-DM-KM QL-2-3-DM-KM QL--3-DM-KM QL-2-3-DM-KM QL--3-DM-KM QL-2-3-DM-KM QL--3-DM-KM QL-2-3-DM-KM QL--3-DM-KM QL-2-3-DM-KM QL--3-DM-KM QL-2-3-DM-KM-25 20/240 VAC, 50/60Hz minimum 0.5A 25A Interrupting capacity 0,000A Dielectric strength V, 50/60Hz 00MM Operating life 0000 mechanical operations Operating temperature C 0.5-5A: 4AWG min., 0AWG max. 0AWG min. UL 489 listed, CSA C22.2 No. 5-02, CE, VDE Bus-bar ( pole, insulated, m) Bus-bar (2 pole, insulated, m) Bus-bar end cap, pole Bus-bar end cap, 2 pole Power lug, straight Power lug, Lock-out handle *Wire sizes: gauges specified are the minimum allowable as per CSA and UL standards. The 99 circuit breakers do not have provisions for marking tags. A possible solution is to cut the adhesive SchS2 tag rail to length (approximately 20 mm on a single pole unit so the current rating remains visible or approximately 30 mm on a two pole unit). The SchS2 accepts DEK, WS and ESG 8/7 marking tags. The part number for adhesive SchS2 is Magnetic Typical Sample trip characteristics - KM 25% 50% % % 600% 800% 000% minimum (sec) (sec) Although the 99 series uses a magnetic only trip mechanism, CSA testing indicates a trip characteristic similar to thermal magnetic trip mechanisms. No de-rating is required at elevated temperatures. Additional trip curves and amp ratings are available upon request. AC Version - dimensions in mm (in.) 7.4 (2.8) 28.5 (.2) 5 (0.2) 9 (0.75) 32 (.) (.77) 74 (2.9) 66 (2.6) 64.8 (2.55) AC version Trip Curve Seconds Minutes (0.7) 57 (2.24) Curve 3 (0.5) 000 (%) Rated (3.65) 0 Trip Curve applies to the following part numbers where "XX" is the current rating: 99252XX XX AC version Trip Curve (.02) 3 (0.5) Seconds Minutes Curve KM 000 (%) Rated Clearwater Tech - Phone: Fax: Web: info@clrwtr.com
2 Branch Rated AC Version with Contacts with Auxiliary switch, Trip alarm, Combination of both Trip Combination AC voltages (20/240V) Single and double pole versions UL 489 and CSA listed Factory fitted auxiliary or trip alarm Compact 6.5mm width Attached to right hand side of circuit breaker 20/240 VAC, 50/60Hz minimum 0.5A 25A Interrupting capacity 0,000A Dielectric strength V, 50/60Hz 00MM Operating life 0000 mechanical operations Operating temperature C 0.5-5A: 4AWG min., 0AWG max. 0AWG min. UL 489 listed, CSA C22.2 No. 5-02, CE, VDE : Aux 9900 QL-A--3-DM-KM QL-A--3-DM-KM QL-A--3-DM-KM QL-A--3-DM-KM QL-A--3-DM-KM QL-A--3-DM-KM QL-A--3-DM-KM-25 : Trip QL-T--3-DM-KM QL-T--3-DM-KM QL-T--3-DM-KM QL-T--3-DM-KM QL-T--3-DM-KM QL-T--3-DM-KM QL-T--3-DM-KM-25 Trip : Combo QL-AT--3-DM-KM QL-AT--3-DM-KM QL-AT--3-DM-KM QL-AT--3-DM-KM QL-AT--3-DM-KM QL-AT--3-DM-KM QL-AT--3-DM-KM-25 Combination *Wire sizes: gauges specified are the minimum allowable as per CSA and UL standards. The 99 circuit breakers do not have provisions for marking tags. A possible solution is to cut the adhesive SchS2 tag rail to length (approximately 20 mm on a single pole unit so the current rating remains visible or approximately 30 mm on a two pole unit). The SchS2 accepts DEK, WS and ESG 8/7 marking tags. The part number for adhesive SchS2 is : Aux 99 QL-A-2-3-DM-KM QL-A-2-3-DM-KM QL-A-2-3-DM-KM QL-A-2-3-DM-KM QL-A-2-3-DM-KM QL-A-2-3-DM-KM QL-A-2-3-DM-KM-25 : Trip 9927 QL-T-2-3-DM-KM QL-T-2-3-DM-KM QL-T-2-3-DM-KM QL-T-2-3-DM-KM QL-T-2-3-DM-KM QL-T-2-3-DM-KM QL-T-2-3-DM-KM-25 : Combo 9928 QL-AT-2-3-DM-KM QL-AT-2-3-DM-KM QL-AT-2-3-DM-KM QL-AT-2-3-DM-KM QL-AT-2-3-DM-KM QL-AT-2-3-DM-KM QL-AT-2-3-DM-KM-25 AC version Trip Curve Dual Mount Dimensions in mm (in.) Magnetic Typical Additional trip curves and amp ratings are available upon request Seconds Minutes00 Curve KM 57.0 (2.24).2 (.03) (N/O)6 (N/C)8 (C)5 3.3 (.23) (C) 2(N/C) 4(N/O) 2.3 (0.84) 32.9 (.3) 2. (0.83) 0.7 (0.42) TRIP ALARM Q. CNECTORS (0.08) 0.5 (0.02) 5.5 (0.22) AUX SWITCH Q. CNECTORS 2.8 (0.) 0.5 (0.02) 7 (0.28) (%) Rated Clearwater Tech - Phone: Fax: Web: info@clrwtr.com
3 Branch Rated DC Version Hydraulic Magnetic Single pole versions only U2 trip curve for general purpose 80 and 25 VDC Up to 60A Just 3 mm wide Mounts on 35mm DIN-rail UL 489A listed VDE (80 VDC) (25 VDC) Ordering Data : (80 VDC) QY--3-DM-U QY--3-DM-U QY--3-DM-U QY--3-DM-U QY--3-DM-U QY--3-DM-U QY--3-DM-U QY--3-DM-U QY--3-DM-U QY--3-DM-U QY--3-DM-U QY--3-DM-U QY--3-DM-U QY--3-DM-U QY--3-DM-U QY--3-DM-U2-60 : (25 VDC) QY--3-DM-U2-0-B QY--3-DM-U2-02-B QY--3-DM-U2-03-B QY--3-DM-U2-04-B QY--3-DM-U2-05-B QY--3-DM-U2-0-B QY--3-DM-U2-5-B QY--3-DM-U2-20-B QY--3-DM-U2-25-B QY--3-DM-U2-30-B QY--3-DM-U2-35-B QY--3-DM-U2-40-B QY--3-DM-U2--B QY--3-DM-U2-50-B QY--3-DM-U2-60-B DC version Trip Curve Dimensions in mm (in.) Bus-bar ( pole, insulated m) Bus bar end cap, pole Power lug, straight Power lug, Lock-out handle Magnetic Typical Additional trip curves and amp ratings are available upon request. 74 (2.9) 66 (2.6) 7.9 (0.7) 3 (0.5) 80,25 VDC minimum 0.5 A 60 A Interrupting capacity 0,000 A Dielectric strength V, 50/60 Hz 00 MM Operating life 0000 mechanical operations Operating temperature C -5A: 4 AWG min., 0 AWG max. 0 AWG min. UL 489A Listed, CE, VDE Seconds Minutes Curve U2 DC (4% Ripple Factor) (%) Rated (2.8) 28.5 (.2) 5 (0.2) 9 (0.75) 32 (.) (.77) 64.8 (2.55) 57 (2.24) 92.8 (3.65) *Wire sizes: gauges specified are the minimum allowable as per CSA and UL standards. The 99 circuit breakers do not have provisions for marking tags. A possible solution is to cut the adhesive SchS2 tag rail to length (approximately 20 mm on a single pole unit so the current rating remains visible or approximately 30 mm on a two pole unit). The SchS2 accepts DEK, WS and ESG 8/7 marking tags. The part number for adhesive SchS2 is Clearwater Tech - Phone: Fax: Web: info@clrwtr.com5
4 Supplemental Hydraulic Magnetic Triple Pole AC s 240/480V Trip curve 2 for general purpose UL 077 recognized VDE, CSA, and CE Approved Just 3 mm wide Mounts to 35 mm DIN-rail Factory fitted auxiliary or trip alarm Single, double and triple pole versions Ordering Data : : : Triple Pole Rating Rating QZ--3-D QZ-2-3-D QZ-3-3-D QZ--3-D QZ-2-3-D QZ-3-3-D QZ--3-D QZ-2-3-D QZ-3-3-D QZ--3-D QZ-2-3-D QZ-3-3-D QZ--3-D QZ-2-3-D QZ-3-3-D QZ--3-D QZ-2-3-D QZ-3-3-D QZ--3-D QZ-2-3-D QZ-3-3-D QZ--3-D QZ-2-3-D QZ-3-3-D QZ--3-D QZ-2-3-D QZ--3-D QZ-2-3-D QZ--3-D QZ-2-3-D QZ--3-D QZ-2-3-D QZ--3-D QZ-2-3-D QZ--3-D QZ-2-3-D QZ--3-D-2-60 Supplemental dimensions in mm (in.) Bus bar ( pole, insulated m) Bus bar (2 pole, insulated m) Bus bar (3 pole, insulated m) Bus bar end cap, pole Bus bar end cap, 2 pole or 3 pole Power lug, straight Power lug, Lock-out handle (0.86) 65 (2.56) 60 (2.36) 25.9 (0.94) (.77) 3 (0.5) 92.8 (3.65) (.02) 39 (.54) 44 (.73) 3 (0.5) 3 (0.5) 5.0 (0.2) 63.8 (2.5) 73 (2.87) 277/480 50/60 Hz minimum 0.5 A 60 A Interrupting capacity 5 277/480 V, 5 20 V, V Dielectric strength V, 50/60 Hz 00 MM Operating life 0000 mechanical operations Operating temperature C -5A: 4 AWG min., 0 AWG max. 0 AWG min. UL 077 Recognized, VDE (EN ), CSA C22.2 No. 235, CE Approved Supplemental Trip Curve Magnetic Typical Additional trip curves and amp ratings are available upon request Seconds Minutes Curve 2 *Wire sizes: gauges specified are the minimum allowable as per CSA and UL standards. The 99 circuit breakers do not have provisions for marking tags. A possible solution is to cut the adhesive SchS2 tag rail to length (approximately 20 mm on a single pole unit so the current rating remains visible or approximately 30 mm on a two pole unit).the SchS2 accepts DEK, WS and ESG 8/7 marking tags. The part number for adhesive SchS2 is (%) Rated Clearwater Tech - Phone: Fax: Web: info@clrwtr.com
5 Supplemental with Contacts Auxiliary switch, Trip alarm, Combination of both Trip Combination AC s 240/480V Trip curve 2 for general purpose UL 077 recognized VDE, CSA, and CE Approved Just 3 mm wide Mounts to 35 mm DIN-rail Factory fitted auxiliary or trip alarm Single, double and triple pole versions 277/480 50/60 Hz minimum 0.5 A 60 A Interrupting capacity 5 277/480 V, 5 20 V, V Dielectric strength V, 50/60 Hz 00 MM Operating life 0000 mechanical operations Operating temperature C -5A: 4 AWG min., 0 AWG max. 0 AWG min. UL 077 Recognized, VDE (EN ), CSA C22.2 No. 235, CE Approved : Aux 9950 QZ-A--3-D QZ-A--3-D QZ-A--3-D QZ-A--3-D QZ-A--3-D QZ-A--3-D QZ-A--3-D-2-25 : Trip QZ-T--3-D QZ-T--3-D QZ-T--3-D QZ-T--3-D QZ-T--3-D QZ-T--3-D QZ-T--3-D-2-25 Trip : Combo QZ-AT--3-D QZ-AT--3-D QZ-AT--3-D QZ-AT--3-D QZ-AT--3-D QZ-AT--3-D QZ-AT--3-D-2-25 Combination *Wire sizes: gauges specified are the minimum allowable as per CSA and UL standards. The 99 circuit breakers do not have provisions for marking tags. A possible solution is to cut the adhesive SchS2 tag rail to length (approximately 20 mm on a single pole unit so the current rating remains visible or approximately 30 mm on a two pole unit). The SchS2 accepts DEK, WS and ESG 8/7 marking tags.the part number for adhesive SchS2 is Supplemental Trip Curve Magnetic Typical 000 Curve 2 : Aux QZ-A-2-3-D QZ-A-2-3-D QZ-A-2-3-D QZ-A-2-3-D QZ-A-2-3-D QZ-A-2-3-D QZ-A-2-3-D-2-25 : Trip QZ-T-2-3-D QZ-T-2-3-D QZ-T-2-3-D QZ-T-2-3-D QZ-T-2-3-D QZ-T-2-3-D QZ-T-2-3-D-2-25 : Combo QZ-AT-2-3-D QZ-AT-2-3-D QZ-AT-2-3-D QZ-AT-2-3-D QZ-AT-2-3-D QZ-AT-2-3-D QZ-AT-2-3-D Seconds Minutes00 Triple Pole Triple Pole Trip ( Alarm Contact) Triple Pole Combination (%) Rated : Triple Pole Aux QZ-A-3-3-D QZ-A-3-3-D QZ-A-3-3-D QZ-A-3-3-D QZ-A-3-3-D QZ-A-3-3-D QZ-A-3-3-D-2-25 : Triple Pole Trip QZ-T-3-3-D QZ-T-3-3-D QZ-T-3-3-D QZ-T-3-3-D QZ-T-3-3-D QZ-T-3-3-D QZ-T-3-3-D-2-25 : Triple Pole Combo QZ-AT-3-3-D QZ-AT-3-3-D QZ-AT-3-3-D QZ-AT-3-3-D QZ-AT-3-3-D QZ-AT-3-3-D QZ-AT-3-3-D-2-25 Clearwater Tech - Phone: Fax: Web: info@clrwtr.com
6 Supplemental GFCI Ground Fault Interrupt CE approved UL077 and UL053 recognized Small frame size (mm wide) Single pole plus switched neutral earth leakage protection Trip point is unaffected by ambient temperature ratings up to 50A Trip indication (mid trip handle position) Trip curve 2 for general purpose GFCI Ordering Data : GFCI QF7A CB W/GFI QF7A250 - CB W/GFI QF7A255 - CB W/GFI QF7A CB W/GFI QF7A CB W/GFI QF7A CB W/GFI QF7A CB W/GFI GFCI dimensions in mm (in.) 73 (2.87) 65 (2.56) Standard Ampere (A) 5 to 50A Sensitivity (ma) 30 (CE) / 22 (UL) Number of Poles + N Equipment Earth Leakage/GFCS Rated (V) 230 (CE) / 240 (UL) Rated Interrupting/ 5 ka Withstand Capacity (ka) Weight (kg) 0. Trip Curve (standard) 2 Operating Temperature -40 to +65ºC UL 077 and UL 053, CE AC version Trip Curve Magnetic Typical Seconds Minutes Curve 2 93 (3.66) 82.4 (3.24) (.02) 44 (.73) 68.8 (2.7) 7.8 (0.307) 57 (2.24) 6.4 (0.646) 8.0 (0.35) (2.8) (.02) (%) Rated 35.7 (.406) Clearwater Tech - Phone: Fax: Web: info@clrwtr.com
7 Mounting Options and Mounting Options If the product is not vertically mounted in the normal DIN-rail mounting orientation, a rating factor must be applied. Figure shows a diagram of the rating factor to apply. The published curves for these circuit breaker products are produced with the circuit breaker in the vertical mounting position. The rating factor only applies to the must hold and must trip points of the curve as the other parts (instantaneous trip point) stay largely unaffected. 95% UP 93% HORIZ UP 95% It is important to note that in environments that are exposed to a high degree of vibration, the cables that connect to the circuit breaker must be securely held in place, as the breaker is not designed to carry the weight of the cables. A of 35N can be applied to the terminal area, in a direction perpendicular to the mounting axis. 00% VERT DOWN HORIZ DOWN VERT 00% 05% 05% 07% Rating 80A max. V max. Short Circuit Strength 25kA Bus bar ( pole, insulated m) Bus bar (2 pole, insulated m) Bus bar (3 pole, insulated m) Bus bar end cap, pole Bus bar end cap, 2 pole or 3 pole Part Number Table - Example To order Circuit Breaker 992 Rating of.0 amp Internal Resistance per Pole of. ohms Trip Curve M, Medium (Standard) 992 Amperage "00" - 0.5A "0" - A "02" - 2A / "60" - 60A Trip Curves "0" - Branch AC KM (Standard) "" - Branch AC OP (Instantaneous) "2" - Branch AC (Fast) "4" - Branch 80VDC (Fast) "5" - Supplemental 2 (Standard) "6" - Branch 25VDC OP (Instantaneous) "7" - Branch 80VDC OP (Instantaneous) "8" - Branch 25VDC U2 (Standard) "9" - Branch 80VDC U2 (Standard) Rating 85A max. Wire Size 0 AWG min., 4 AWG max. Dimensions A: 6 mm B: 32 mm Power lug, straight Power lug, Poles Pole 2 Pole 3 Pole "5" - Base Breaker "6" - With Auxiliary Contact "7" - With Trip Alarm Contact "8" - Combo Aux/Trip Contact "9" - GFCI Lock-out handle Clearwater Tech - Phone: Fax: Web: info@clrwtr.com
Circuit Breakers. Next Generation of Protection Capabilities
Circuit Breakers Next Generation of Protection Capabilities Circuit Breaker Offering Rockwell Automation offers a full line of Allen-Bradley circuit breakers and motor protection devices to help meet many
More informationPositive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
More informationTmax MCCBs. Molded case circuit breakers. Tmax
Molded case circuit breakers Introduction ABB is once again demonstrating its commitment to new product development and its superiority in product performance. Never before has the industry seen such high
More informationOutdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Features SELV Compliant No Detection Passive Injector Gigabit Compatible Full Protection
More informationMini Circuit Breakers, Fuse Blocks, and Electronic Circuit Protection
Technical Data Mini Circuit Breakers, Fuse Blocks, and Electronic Circuit Protection Topic Page 1489-M Miniature Circuit Breakers 2 1492-SP Supplementary Protectors 15 1492-D Circuit Breakers 27 188 Regional
More informationE-STOP relays, safety gate monitors
Unit features Safety features Gertebild ][Bildunterschrift_NOT_Sch.tuer_Licht Safety relay for monitoring E-STOP pushbuttons, safety gates and light beam devices Approvals Gertemerkmale Positive-guided
More informationRM4TG20 three-phase network control relay RM4-T - range 200..500 V
Characteristics three-phase network control relay RM4-T - range 200..500 V Complementary [Us] rated supply voltage Output contacts Setting accuracy of time delay Delay at power up Measuring cycle Marking
More informationBulletin 150 Smart Motor Controllers SMC-3 Smart Motor Controller
Overview/Modes of Operation Bulletin 150 Smart Motor Controller The SMC-3 is a compact, simple to use, solid-state motor controller designed to operate 3-phase motors. It features a built-in overload relay
More informationE-STOP relays, safety gate monitors
Unit features Safety features gang engertebild ][Bildunterschrift_NOT_Sch.tuer_Licht Safety relay for monitoring E-STOP pushbuttons, safety gates and light beam devices Approvals Gertemerkmale Positive-guided
More information8146/5 Series Breaker Panelboards
8146/5 Series Breaker Panelboards DISTRIBUTION BREAKER PANELBOARDS FOR HAZARDOUS & CORROSIVE ENVIRONMENTS Breaker Panels Features: Wide variety of Flameproof branch circuit breakers for Zone 1 & Division
More informationO WA-120U series IP67. 120W Single Output Switching Power Supply. Features. Aplications
Features UniversalACinput/Fulrange Built-inactivePFCfunction Higheficiencyupto91% Protections:Shortcircuit/Overcurent/ Overvoltage/Overtemperature Fanlesdesign,colingbyfreairconvection Colingbyfreairconvection
More informationE-STOP relays, safety gate monitors
Unit features Safety features Gertebild ][Bildunterschrift Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Gertemerkmale Positive-guided relay outputs: 3 safety contacts (N/O),
More informationThe complete range of consumer switchboards and switchgear
Power Distribution The complete range of consumer switchboards and switchgear www.nhp.com.au/mod6 The MOD6 range of consumer switchboards and switchgear is specifically designed for domestic and commercial
More informationElectronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact The CT-AHD.12 is an electronic time relay with OFF-delay. It is from the CT-D range. With their MDRC profile and a width of only
More informationYour Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592. * see variants. Applications.
Safety Technique SAFEMASTER Emergency Stop Module BG 5924, IP 5924 Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592 BG 5924 IP 5924 Product Description
More information33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application
33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3at Standard -40 to +60 C Temperature Range Diagnostic LEDs Full Protection
More informationUncompromising safety and comfort The next generation of miniature circuit breakers MCB S 200/S 200 M
Uncompromising safety and comfort The next generation of miniature circuit breakers MCB S 200/S 200 M The details make the difference MCB S 200/S 200 M A range designed to ensure efficiency and protection
More information38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 SERIES Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical
More informationPNOZsigma - Base units
PNOZsigma - Base units Register Login Sensors Control and Communication Electronic monitoring relays Safety Relays PNOZ X PNOZsigma PNOZelog PNOZmulti PNOZpower Configurable control systems Programmable
More informationType: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated. Ordering information
Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated Ordering information Connection technique Description Description Rated operational current Screw terminals 3 pole AC
More informationBulletin 1489 Circuit Breakers. Selection Guide
Bulletin 1489 s Selection Guide Bulletin 1489-A Overview/Description Bulletin 1489-A s Energy-limiting design protects downstream components better than conventional breakers during short circuits Field-mountable
More information38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays
More informationSystem pro M compact Miniature Circuit Breaker S 200/S 200 M
Data Sheet System pro M compact Miniature Circuit Breaker S 200/S 200 M 2CDC021023S0012 2CDC021038S0012 The miniature circuit breakers of the System pro M compact series S 200 and S 200 M provide state-of-the-art
More informationContact expansion modules
Gertebild ][Bildunterschrift Kontakterweiterungen Contact for increasing the number of available contacts Approvals Zulassungen Unit features Gertemerkmale Positive-guided relay outputs: 4 safety contacts
More informationAC1645. System pro M compact Supplementary Protectors Miniature MCCBs
AC1645 System pro M compact Supplementary Protectors Miniature MCCBs Table of Content 1 2 3 4 5 pro M compact General information...1.1 S200 - Supplementary protectors...1.7 S200U - Miniature MCCBs...1.12
More informationAP/UP, AP/MIL Series. Magnetic Circuit Protectors
AP/UP, AP/MIL Series Magnetic Circuit Protectors Introduction Poles Configurations Operating Characteristics Delay Curves Specifications Decision Tables 71 72 75 76 77 78 79 AP/UP, AP/MIL Series Hydraulic
More information48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0.
48 Series - Relay interface modules 8 A Features 48.12 2 Pole Safety relay interface modules, 15.8 mm wide 48.12-2 Pole 8 A (screw terminal) DC sensitive coils Relay with forcibly guided contacts according
More informationNF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101433D0201 28/03/11 NF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals NF(Z) contactor relays are used for switching auxiliary and control circuits.
More informationCAT ATC POWER BREAKER & POWER CASE SWITCH AUTOMATIC TRANSFER SWITCH
CAT ATC POWER BREAKER & POWER CASE SWITCH AUTOMATIC TRANSFER SWITCH Cat transfer switches are designed for a variety of standby power applications. They provide flexibility, reliability and value in a
More informationE-STOP relays, safety gate monitors
Gertebild ][Bildunterschrift Safety relay for monitoring E-STOP pushbuttons and safety gates. Unit features Gertemerkmale Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous Connection
More informationApplication Switchgear for industrial and commercial applications. U e V AC 230/400. 48 (per pole)
Overcurrentswitch,6A,2p,D-Char,AC Partno. FAZ-D6/2 Articleno. 278777 CatalogNo. FAZ-D6/2 Similar to illustration Deliveryprogramme Basic function Miniature circuit breakers Pole 2 pole Tripping characteristic
More informationE-STOP relays, safety gate monitors
Gertebild ][Bildunterschrift Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Unit features Gertemerkmale Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous
More informationDatasheet. AC Outlet DIN-Rail Mountable Receptacles
Datasheet AC Outlet DIN-Rail Mountable Receptacles DIN-rail receptacles, 5A, 15A and 20A power outlets, provide a convenient power source for portable computers or test devices for in-the-panel troubleshooting.
More informationThree-phase monitoring relay CM-PFE
Data sheet Three-phase monitoring relay CM-PFE The CM-PFE is a three-phase monitoring relay that monitors the phase parameter phase sequence and phase failure in three-phase mains. 2CDC 251 005 S0012 Characteristics
More informationCircuit Breakers. NRC Series. NRC Series. 900 www.idec.com
Switches & Pilot Lights Display Lights NRC series circuit breakers offer circuit protection which is far superior to using fuses in applications containing relay circuits, motor circuits, heater circuits,
More informationAnalogue Input, 4-fold, MDRC AE/S 4.1, GH Q605 0054 R0001
Analogue Input, -fold, MDRC, GH Q605 005 R0001 The analogue input is a DIN rail mounted device for insertion in the distribution board. It is connected to the EIB via the bus connecting terminal supplied.
More informationExample of use: Fuse for a solenoid valve. If the fuse is defective, no information is sent to the electronic component.
Overview Switch and button modules The dimensions of the switch and button modules are adapted to the electronic components in the integral housing. The modules are equipped with the universal clip-on
More information49 Series - Relay interface modules 8-10 - 16 A. Features
Features 1 & 2 Pole relay interface modules 5 µm Gold plate contacts for low level switching capability 49.31-50x0-1 Pole 10 A (screw terminal) 49.52-50x0-2 Pole 8 A (screw terminal) 49.72-50x0-2 Pole
More informationType: DILM32 10(24V50HZ) Article No.: 277247
Type: DILM32 10(24V50HZ) Article No.: 277247 Ordering information Rated operational current AC 3 400 V I e A 32 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase motors,
More informationPRODUCT GUIDE. SL Medium Voltage IEC Vacuum Contactors
PRODUCT GUIDE SL Medium Voltage IEC Vacuum Contactors Table of Contents 1 Overview Introduction....................................................2 Features........................................................2
More informationElectronic overload relay EF19 and EF45
Data sheet Electronic overload relay EF19 and EF45 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays. Motor
More informationElectronic timer CT-VBS.17+18 OFF-delayed without auxiliary voltage, for DC contactors Data sheet
Characteristics Single-function OFF-delay timer for DC contactors, without auxiliary voltage Width.5 mm CDC 5 6 F3 Approvals A culus E CCC CT-VBS a Circuit diagram b Marker label Marks a CE b C-Tick Order
More informationElectronic overload relay EF65, EF96 and EF146
Data sheet Electronic overload relay EF65, EF96 and EF146 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays.
More informationThermal-Magnetic Circuit Breaker 3120-...-M1-..
Thermal-Magnetic Circuit Breaker -...-M-.. Description Single or two pole rocker switch/thermal-magnetic circuit breaker with trip-free mechanism (S-type TM CBE to EN 34). The addition of a magnetic tripping
More informationRelés e Contatores de Estado Sólido SIRIUS
Relés e Contatores de Estado Sólido SIRIUS Coletânea de dados técnicos ( product data sheet ) Agosto/212 SSR - 3RF21 22,5 mm Ponto Zero SSR - 3RF2 45 mm Ponto Zero SSR - 3RF22 45 mm Ponto Zero Trifásico
More informationReyrolle Protection Devices. 7PG17 - XR Intertripping, Interposing, Supervision and Special Purpose Relays. Answers for energy
Reyrolle Protection Devices 7PG17 - XR Intertripping, Interposing, Supervision and Special Purpose Relays. Answers for energy Siemens Protection Devices Limited 2 7PG17 XR101 & XR102 Intertripping Relay
More informationSingle-phase (220...240 V) voltage monitoring: Undervoltage Overvoltage Window mode (overvoltage + undervoltage) Voltage fault memory selectable
Features 70.11 70.31 70.41 Electronic voltage monitoring relays for single and three-phase applications Multifunctional types, providing the flexibility of monitoring Undervoltage, Overvoltage, Window
More informationMolded Case Circuit Breakers, Motor Protection Circuit Breakers, and Motor Circuit Protectors. Technical Data
Molded Case Circuit Breakers, Motor Protection Circuit Breakers, and Motor Circuit Protectors Technical Data Table of Contents Introduction... 4 Definitions... 5 Product Range... 8 Product Line Overview...11
More informationTrip circuit supervision relay. Type RXTCS
Trip circuit supervision relay Type RXTCS ABB a global technology leader ABB is a global leader in Power and Automation technologies that enable utility and industry customers to improve performance while
More informationSafety technique. Emergency stop module BO 5988 safemaster
Safety technique Emergency stop module BO 5988 safemaster 0221562 Function diagram Pushbutton on Mains or emergencystop () K1 According to EC Directive for machines 98/37/EG According to IEC/E 60204-1
More informationSENTRON Switching and Protection Devices Air Circuit Breakers
Siemens AG 9 SENTRON Switching and rotection Devices Air Circuit reakers 5 5/ Introduction 3WL Air Circuit reakers 3WL Air Circuit reakers/ Non-Automatic Air Circuit reakers up to 63 A (AC) 5/6 General
More informationChrome DIN Rail Power Supply 24V 30W 1 Phase (Class II & NEC Class 2) / DRC-24V30W1AZ
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage without power de-rating Efficiency > 87.0% @ 115Vac & 230Vac NEC Class 2 / Limited
More informationContact expander modules
Gertebild ][Bildunterschrift Kontakterweiterungen Contact expansion module for increasing the number of available contacts Approvals Zulassungen Unit features Gertemerkmale Positive-guided relay outputs:
More informationSecondary Unit Substations
14 SWITCHGEAR Secondary Unit Substations Overview Siemens offers a wide variety of unit substation designs to meet customer requirements. A unit substation consists of one or more transformers mechanically
More informationType: DILM9 10(24VDC) Article No.: 276705
Type: DILM9 10(24VDC) Article No.: 276705 Ordering information Rated operational current AC 3 400 V I e A 9 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase motors, 50
More information650W Single Output Power Supply 15V 24V. 27V 48V Rated Current. 0 ~ 100A 0 ~ 50A 0 ~ 40A 0 ~ 27A 0 ~ 24A 0 ~ 13.6A Rated Power
Features: Universal AC input / Full range Programmable output Voltage (0% ~ 05%) Programmable output Current (% ~ 05%) + / 0.5A auxiliary output Forced current sharing at parallel operation Power OK signal
More informationPWM-90 series IP67 TRC ELECTRONICS, INC. 1.888.612.9514. www.trcelectronics.com/meanwell. Mean Well PWM-90 Series
TRC ELECTRONICS, INC. 90W PWM output LED power LED supply Power Supply Constant Voltage PFC High Efficiency 90W Ⅱ Ⅱ IP67 TRC ELECTRONICS, INC. 90W PWM output LED power supply SPECIFICATION MODEL OUTPUT
More informationCatalogue May 2015. EasyLine XLP Fuse Switch Disconnector 1-2-3-4 pole
Catalogue May 2015 EasyLine XLP Fuse Switch Disconnector 1-2-3-4 pole Contents Introduction 1 Overview 1-pole 2 Overview 2-pole 3 Overview 3-pole 4 Overview 4-pole 5 Electronic Fuse Monitoring 6 Busbar
More informationHow To Test A Power Distribution Unit
PDUAC3U SERIES AC POWER DISTRIBUTIO UITS www.unipowerco.com Manual o. PDUAC3U-1 pduac3u-man-rev1-1015.indd 2015 UIPOWER LLC All Rights Reserved ORTH AMERICA 3900 Coral Ridge Drive, Coral Springs, Florida
More informationVario-Series Accessories
Accessories and spare parts for GMW analogue panel meters and controllers Current Transformers pages 2-9 Shunt Resistors 10-11 Voltage Dividers 12 Power supply for indicator/controllers 13 Blanking Plates
More informationR.C.C.B. s two-pole LEXIC
87045 LIMOGES Cedex Telephone : (+33) 05 55 06 87 87 Fax : (+ 33) 05 55 06 88 88 R.C.C.B. s two-pole LEXIC 089 06/09/10/11/12/15/16/17/18/ 27/28/29/30/35, CONTENTS PAGES 1. Electrical and mechanical characteristics...
More informationGeneral information Circuit breakers for power distribution T1 T3
Circuit breakers for power distribution T1 T3 T1 T2 T3 T1 1P T1 T2 T3 UL 489 CSA C22.2 Frame size A 100 100 100 225 Number of poles Nr 1 3, 4 3, 4 3, 4 Rated voltage AC (50-60 Hz) V 277 600Y / 347V 480
More informationDimensions, Inches (mm) No. of Poles Width Height Depth 2, 3 8.25 (210) 16 (407) 5.5 (140) 4 11.125 (283) 16 (407) 5.5 (140)
9-10N Supersedes Selection Data 9-10N, pages, 1-, dated dated March March 1995 1995 Mailed to: E, D, C/9-100A, 31-A, INTERRUPTING CAPACITY RATINGS IEC 947- Interrupting Capacity s➀ Interrupting Capacity
More information1000W Single Output Power Supply 15V 24V. Protection type: Total Power limit, Latch-style (Recovery after reset AC power ON or inhibit)
000W Single Output Power Supply AK-000 series Features: Universal AC input / Full range Programmable output Voltage (0% ~ 05%) Programmable output Current (% ~ 05%) + / 0.5A auxiliary output U profile,
More informationE-STOP relays, safety gate monitors
Unit features Unit description Gertebild ][Bildunterschrift Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Gertemerkmale Positive-guided relay outputs: 3 safety contacts (N/O),
More informationHERZ-Thermal Actuators
HERZ-Thermal Actuators Data Sheet 7708-7990, Issue 1011 Dimensions in mm 1 7710 00 1 7710 01 1 7711 18 1 7710 80 1 7710 81 1 7711 80 1 7711 81 1 7990 00 1 7980 00 1 7708 11 1 7708 10 1 7708 23 1 7709 01
More informationType: DILM50(230V50HZ,240V60HZ) Article No.: 277830
Type: DILM50(230V50HZ,240V60HZ) Article No.: 277830 Ordering information Rated operational current AC 3 400 V I e A 50 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase
More information48 SERIES Relay interface modules 10 A
48 Relay interface modules 10 A 1 CO relay interface modules, mm wide Ideal interface for PLC and electronic systems Type 48.P3 1 CO 10 A s Type 48.31 1 CO 10 A s AC coils or DC sensitive coils Supply
More informationMolded Case Circuit Breaker Specifications Bulletin Number 140U-D
Technical Data Molded Case Circuit Breaker Specifications Bulletin Number 140U-D Topic Page Product Line Overview 2 Specifications 3 Trip Curves 4 Approximate Dimensions 6 Additional Resources These documents
More informationSafety automation solutions
Operating principle, characteristics Preventa safety s types XPS AV,, For and switch monitoring Operating principle Safety s XPS AV, and are used for monitoring circuits conforming to standards EN/ISO
More information5SV Residual Current Protective Devices
s Siemens AG 2013 SENTRON 5SV Residual Current Protective Devices New portfolio for reliable personnel, material and fire protection Safe protection against residual currents Residual current protective
More informationG7SA. Ordering Information. Slim Plug-In Safety Relay. Slim Safety Relay for Machine Control. H Slim body only 13 x 24 x 50 mm
Slim Plug-In Safety Relay Slim Safety Relay for Machine Control H Slim body only 13 x 24 x 50 mm (six poles) H Four-pole and six-pole models are available H Terminal arrangement simplifies PCB pattern
More informationBRITISH STYLE SEMICONDUCTOR PROTECTION FUSES
The Edison British Style semiconductor protection fuses include a 660VAC line utilizing new filler technology. These new fuses have greatly reduced peak let-through current and energy under fault conditions
More informationABB 1. Three-phase monitoring relay CM-PFS. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories. Application.
1SR 430 824 F9300 Features Monitoring of three-phase mains for phase sequence and failure Powered by the measuring circuit 2 c/o (SPDT) contacts 1 LED for status indication Approvals R: yellow LED - relay
More informationAF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101403D0201 24/03/11 AF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals AF09(Z) contactors are used for controlling power circuits
More informationRY2 miniature industrial relays
6 RY2 Relays of general application For plug-in sockets, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting Flat insert connectors - faston x 0,5 mm Recognitions, certifications, directives: RoHS,
More informationSubmit shop drawings for equipment provided under this section Shop drawings shall indicate:
Section 16435 - SWITCHBOARDS Introduction Part 1 - General Reference The work under this section is subject to requirements of the Contract Documents including the General Conditions, Supplementary Conditions,
More informationAuxiliary Relay. Type P8n, PQ8n, PN8n
Auxiliary Relay Type P8n, PQ8n, PN8n ABB a global technology leader ABB is a global leader in Power and Automation technologies that enable utility and industry customers to improve performance while lowering
More informationBussmann. All-In-One Module. Bussmann Power Module Switch. How to configure Part Numbers: Step 1: Select Switch Amperage 1
How to configure Part Numbers: Step : Select Switch Amperage Power Module Switch Rating (Amps) Power Module Switch Catalog No. 30 3 60 6 00 200 2 400 4 Step 2: Select Options Needed 5 Bussmann Power Module
More informationRISH CON - Hz. Salient Features : Application : Product Features: FREQUENCY TRANSDUCER
Application : The RISH CON - Hz transducer is used for frequency measurement. The output signal is proportional to measured frequency and is either load independent DC Current or load independent DC Voltage.
More informationISOMETER IRDH275. Insulation monitoring device for unearthed AC, AC/DC and DC systems (IT systems) Vorläufiges Datenblatt
Insulation monitoring device for unearthed AC, AC/DC and DC systems (IT systems) Vorläufiges Datenblatt TDB106015en/05.2013 Insulation monitoring device for unearthed AC, AC/DC and DC systems (IT systems)
More informationTelephone- and leased line modem for industrial applications TD-36
Telephone- and leased line modem for industrial applications TD-36 Modem for industrial PSTN- and leased line applications The TD-36 is an analogue V.34 PSTN modem as well as an industrial 2-wire leased
More informationManual motor starter MS116
Data sheet Manual motor starter MS116 Manual motor starters are electromechanical devices for motor and circuit protection. These devices offer local motor disconnect means, manual ON/ OFF control, and
More informationW DATA SHEET: RESIDUAL CURRENT CIRCUIT BREAKER 25-100A, SERIES BCF0 AND BCF6
W DATA SHEET: RESIDUAL CURRENT CIRCUIT BREAKER 25-100A, SERIES BCF0 AND BCF6 W SCHRACK-INFO Any mains connection If using 4-pole. switches with 3 or 2-poles, ensure connection acc. to assembly instructions
More information3RT1015-1BB41 CONTACTOR, AC-3 3 KW/400 V,
Automation Technology > Industrial Controls > Switching Devices > Contactors and Contactor Assemblies > Power Contactors for Switching Motors > Contactors SIRIUS 3RT10, 3-pole, 3... 250 kw 3RT1015-1BB41
More informationCurrent and voltage measuring relays
Current and voltage measuring relays RXIK 1, RXEEB 1 and Page 1 Issued June 1999 Changed since July 1998 Data subject to change without notice RXIK 1 RXEEB 1 (SE980082) (SE980081) (SE970869) Features Application
More informationInductive Proximity Sensors
M12 Inductive Proximity Sensors Standard Length Mini's Extended Sensing 3 Wire DC 2 Wire DC 2 Wire AC (Wiring Schematic) 3 Wire DC PNP Normally Open (1) IMM32122C IMM35124C IMN32122C IMN35124C IMN32122M12
More informationMILLENIUM INSTALLATION MANUAL NTR 735 A. Simple Automation Control Module (MAS)
MILLENIUM Table of contents 1. INTRODUCTION 1 2. HARDWARE DESCRIPTION 2 3. INSTALLATION 5 4. CONNECTION 6 5. USER SAFETY AND PROTECTION OF EQUIPMENT 8 1. Introduction The MILLENIUM series has been designed
More informationControl Devices Catalogue. Control Devices. Preferred and Standard Products
Control Devices Catalogue Control Devices Preferred and Standard Products KOP.J Timer Electronic 22.5 mm Characteristics Mounting KOP.J 22.5 mm mono or multifunction high immunity to interference surface
More informationABB 1 NEW. Three-phase monitoring relay for grid feeding CM-UFS.1. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories
2CDC 251 014 F0t09 Features Monitoring of three-phase mains for grid feeding Type-tested in accordance with DIN V VDE V 0126-1-1: February 2006 Neutral conductor connection configurable Can also be used
More informationVoltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
More informationSZR-LY Series. General Purpose Power Relay WARNING WARNING. Sensing and Control
Power Relay FEATURES Small package design ARC barrier equipped Silver Cadium Oxide contact High dielectric strength (,800 Vac) High reliability and long life Ultra-high sensitivity with quick response
More informationWINGLIKE ELECTRONICS CO.,LTD
WINGLIKE ELECTRONICS CO.,LTD SPECIFICATION FOR APPROVAL AC/DC ADAPTOR CUSTOMER: CUSTOMER SPECS INPUT: 100-240V AC 50-60HZ, 5V/2A ADAPTOR OUR MODEL NO.: GM-050200 (UL) E321192 SPECIFICATION NO.: WL1105102
More informationChrome DIN Rail Power Supply 12V 54W 1 Phase (Class II & NEC Class 2) / DRC-12V60W1AG
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage and full power up to 55 C Power will not de-rate for the entire input voltage range
More informationCUSTOMER CLASS FILE. ABB STOTZ-KONTAKT GmbH 3215-30 098793_0_000
Seite 1 von 6 Certification Record CUSTOMER CLASS FILE ABB STOTZ-KONTAKT GmbH 3215-30 098793_0_000 Eppelheimer Strasse 82, SUPPLEMENTARY PROTECTORS- COMPONENT ACCEPTANCE PROGRAM Heidelberg Baden-Wurttemberg
More informationActuator-Sensor-Interface
Selection and ordering data Design Order No. Price Pack 3RX9 307-0AA00 3RX9 307-1AA00 4FD5 213-0AA10-1A 3RX9 305-1AA00 3RX9 306-1AA00 Single output IP 65 current 2.4 A Rated input voltage DC 24 V current
More informationType Sealing Poles Contacts Rated voltage Model Standard d Flux-tight 4 poles oes 3PST-NO, SPST-NC 24 VDC G7SA-3A1B 3PST-NO, 3PST-NC
Safety Relay Slim Safety Relays Conforming to EN Standards The forcibly guided contact in the assures safe operation (EN50205 Class A, approved by VDE.) Ideal for use in safety circuits in press machinery,
More informationLow voltage Direct Current Network. Compact NSX DC PV. Circuit breakers and switch disconnectors for solar application.
Low voltage Direct Current Network Compact NSX DC PV Circuit breakers and switch disconnectors for solar application Catalogue 2012 Compact NSX DC PV A complete DC offer for solar application from 80
More informationPWM-60 series IP67 TRC ELECTRONICS, INC. 1.888.612.9514. www.trcelectronics.com/meanwell
60W PWM output LED power supply Ⅱ IP67 Ⅱ TRC ELECTRONICS, 60W PWM output INC. LED power supply SPECIFICATION MODEL OUTPUT INPUT PROTECTION DC VOLTAGE RATED CURRENT RATED POWER DIMMING RANGE PWM FREQUENCY
More information