Multi-Speed Three-Phase Induction Motors
|
|
|
- Domenic Greene
- 7 years ago
- Views:
Transcription
1 Multi-Speed Three-Phase Induction Motors Including Motors for Fan Applications Product Catalogue
2 Multi-Speed Three-Phase Induction Motors Certificates Cantoni Motor SA ISO 0 KEMA Since September 0, Besel SA ISO 0 DQS Since July, 99 00Q Indukta SA ISO 0 KEMA Since April, 99 ISO 00 KEMA Since July, Celma SA ISO 0 Germanischer Lloyd since June, 99 QS- HH ISO 00 Germanischer Lloyd Since November, 999 EM- HH Emit SA ISO 0 Polski Rejestr Statków Sine January, 99 NC-0/00 0 0
3 Multi-Speed Three-Phase Induction Motors Cantoni Motor S.A. M. Gra yñskiego, -0 Bielsko-Bia³a, Poland tel.: + 00 fax: + 0 motor@cantonigroup.com BESEL od roku 90 od roku od roku 9 od roku EMIT od roku 9 0
4 DESCRIPTION OF THE CATALOGUE VERSION Application general industrial, centrifugal machines Duty S voltage 00V Frequency 0 Hz Ambient temperature from - C to +0 C Mounting height up to 000 m above sea level of free shaft ends Insulation class F Degree of protection IP DESCRIPTION OF THE CUSTOMIZED VERSION Different duty type Different supply voltage Frequency 0 Hz of free shaft ends Insulation class H Degree of protection IP Tropicalization Other versions per customer s specifications Motor type designation s s Operating duty Supply voltage Frequency Mounting arragements Degree of protection Special requirements ORDERING INFORMATION When placing an order, the following motor data should be given: Information concerning additional accesories e.g. Thermal protection Anticondensation heaters Vibration sensors, etc. When ordering spare parts the following data should be given: Full motor type designation including its serial number Degree of protection Mounting arrangement Name of spare part of pieces As part of our development program, we reserve the right to alter or amend any of the specifications included in this catalogue without giving prior notice. 0
5 This catalogue covers industrial squirrel cage multi- motors for general application as well as for driving centrifugal machines such as fans. Our motors are designed for long life and reliable operation in severe industrial applications. All the motors are manufactured in Quality Assurance System consistent with ISO 0. ISO0 Multi- motors can be applied where a rough grading of is acceptable. In these motors the operation at two or more fixed s is obtained by changing the magnetic poles. Multi- motors can be either single winding - Dahlander connection where ratio is to or with two separate windings where ratio other than to can be obtained. Single winding motors are designed for direct starting from the supply and are single voltage. All the motors described in the present catalogue are provided with CE mark. It means that our products are consistent with the European Union directives regarding the safety measures. In this catalogue the motors designed especially for driving centrifugal machines are marked. In these motors the power at higher is much larger than at lower. It is because the demanded for this kind of applications varies as the square of the. The other motors can be used in applications with constant requirements such as mixers, conveyors. General technical information such as type of bearings, mounting arrangements, construction is the same as for standard motors and is described in catalogue: General Purpose -Phase Induction Motors. This catalogue contains also dimensional drawings of motors. The motors covered by this catalogue comply with the IEC 00- standard as well as standards effective in other countries, consistent with IEC. IEC This catalogue describes the most widely used multi- motors. Other types - for different fixed s can be supplied according to customer s specifications. 0
6 00/000 rpm - motors designed application rotor Weight (IMB) P N n N T N N cos N I [00V] N T L/TN I L/IN T b/tn J m [HP] [rpm] [Nm] [%] [-] [A] [-] [-] [-] [kgm ] p=/ n =00/000 rpm s. Sh -/A. Sh -/AW. Sh -/B. Sh -/BW. Sh -/C. Sh 0-/A. Sh 0-/AW. Sh 0-/B 9. Sh 0-/BW 0. Sh S-/. Sh S-/W. Sh L-/. Sh L-/W. PSh L-/ ) 0, 0, 0,0 0, 0, 0, 0, 0, 0, 0,,00, 0,,,,, 0, 0, 0,09 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,, 0,,,, ,,0 0,,,,,09,0,,,,,,,,9 9,,9,,, ,,,,,,,9,, 0, 0, 0, 0, 0. 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,,, 0,,,,,, 0,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9,,,,,,,,,,,,0,,,,9,9,,,,,,,,,,,,,,,,,,,,9,, 0,0000 0,0000 0,000 0,000 0, ,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,0,9,9,,,,, 0, 0,, )- mounting and overall dimensions are the same as for Motors with Increased Output. Highest at both s, Dahlander connection Centrifugal drive, Dahlander connection W U L V U W L V W U U V L W V L U V W U V W U V W U V W L L L L 0
7 00/000 rpm - motors designed application rotor Weight (IMB) [Nm] p=/ N cos N I N [00V] [%] [-] [A] n s=00/000 rpm T L/TN I L/IN T b/tn J m [HP] [rpm] [-] [-] [-] [kgm ]. Sg 00L-/A. Sg 00L-/AW. Sg 00L-/B. Sg 00L-/BW 9. Sg M-/ 0. Sg M-/W. Sg S-/. Sg S-/W. Sg S-/WB. Sg M-/. Sg M-/B. Sg M-/W. Sg M-/WB. PSg M-/ ) 9. Sg 0M-/ 0. Sg 0M-/W. Sg 0L-/. Sg 0L-/W, 0,,,,,,,,,,,,,9,,,,,, 0 0,,,,,,,,,,,,,9 9,, 0, 9,, 0, 0,, ,,,,,,9,9,, 9,9 9, 9,, 0,,,, 9,,,9 9,,,,,9,,9,,9,9,,, 9,,,,,,9 9, 9, 9,9,,,,,,,, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 0, 0, 0, 0, 0, 0, 0, 0,,,,,,,, 9, 9,,,,,,,,,,,, 9,,,, 9,,9,,,,,,,,,,,,,,,,,0,,,,,,,,,,,,,9,,,9,9,,,,,,,,,,9,,,9,,,,,,9,,,,,,,,,,,9,,,,9,,,,9,,,,,,,,,,9,, 0,00 0,00 0,00 0,00 0,09 0,09 0,09 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0,,, ) - mounting and overall dimensions are the same as for Motors with Increased Output. Highest at both s, Dahlander connection Centrifugal drive, Dahlander connection W U V W L V W L U U U V L W V L U V W U V W U V W U V W L L L L 0
8 00/000 rpm - motors designed application rotor Weight (IMB) [rpm] p=/ N cos N I N [00V] [%] [-] [A] n s=00/000 rpm T L/TN I L/IN T b/tn J m [HP] [Nm] [-] [-] [-] [kgm ] Sg 0M-/ Sg 0M-/W Sg 0L-/ Sg 0L-/W Sg 00L/ Sg 00L/ Sg S/ Sg S/ Sg M/ Sg M/ Sg 0M/ Sg 0M/ Sg 0S/ Sg 0S/ Sg 0M/ Sg 0M/ Sg M/ 9, 9,, 0 9, 9 9, 0, ,,,,,9,,9 0, ,,,,,9 9 9,, 9, 9, 9, 9 9 9, 9, 9, 9, ,9 9, 9, 9, 9 9, 9, 9 0,9 0, 0, 0, 0, 0, 0, 0,, 0,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9,,,,,,,,,,,,, 0, 0, 0, 0, 0, 0, 0, 0,, Highest at both s, Dahlander connection Centrifugal drive, Dahlander connection V W L V W W U L U U U V W V L L U V W U V W U V W U V W L L L L 0
9 000/00 rpm - motors designed application rotor Weight (IMB) [HP] p=/ T N N cos N I N [00V] [Nm] [%] [-] [A] n s=000/00 rpm P N n N T L/TN I L/IN T b/tn J m [rpm] [-] [-] [-] [kgm ] Sh -/A Sh -/B Sh -/C Sh 0-/A Sh 0-/B Sh 0-/C Sh S-/ Sh L-/ Sh S-/W Sh L-/W Sg 00L-/A Sg 00L-/AW Sg 00L-/B Sg 00L-/BW Sg M-/ Sg M-/W 0,0 0, 0, 0, 0, 0, 0, 0, 0,0 0 0, 0, 0, 0,,,,, 0,0 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 0,,0 0,,,,,9,, ,,,9 9,,,,0,,0,,,,,,,9,,0,,,, 0, ,,,0,,9,9 9,,,,,,,9,0,, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,9 0, 0,,0, 0,,,,,,,9,,9,9,,,,,,,,,,,,0,,,,,,,,,,,,,,,,,,,0,0,,,,,,,,,,9,,,,,,,,,,,,,,,,,,,,,0,,,,,,,,,,,,,,,,0, 0,000 0,0009 0,00 0,009 0,000 0,009 0,00 0,00 0,00 0,00 0,00 0,00 0,009 0,009 0,00,0,9,,,,,,,,, Two separate windings, centirfugal drive or highest at both s L L U V W U V W U V W L L 09
10 000/00 rpm - motors designed application rotor Weight (IMB) N cos N I N [00V] T L/TN I L/IN T b/tn J m [HP] [rpm] [Nm] [%] [-] [A] [-] [-] [-] [kgm ] p=/ n =000/00 rpm s Sg S-/ Sg S-/W Sg M-/ Sg M-/W Sg 0M-/ Sg 0M-/W Sg 0L-/ Sg 0L-/W Sg 0L-/ Sg 0L-/W,,,,,,,,,,, 0,, 0,,,,,,,,, 9,9, 9 9,,,, ,,,, 0, 9,,,,,9,,,,,, 9, 0 9,,,,,9,,, 9,,,, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,9 0, 0, 0, 0,,,9, 9,,,9,, 0,,9 9,9,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9,,,,,,,,,,,,,9,,,,,,, 0,09 0,0 0,099 0,09 0,0 0,09 0,09 0,09 0,9 0, Two separate windings, centirfugal drive or highest at both s L L U V W U V W U V W L L 0
11 000/00 rpm - motors designed application rotor Weight (IMB) N cos N I N [00V] T L/TN I L/IN T b/tn J m [HP] [rpm] [Nm] [%] [-] [A] [-] [-] [-] [kgm ] p=/ n =000/00 rpm s Sg 00L/ Sg 00L/ Sg S/ Sg S/ Sg M/ Sg M/ Sg 0M/ Sg 0M/ Sg 0S/ Sg 0/ Sg 0M/ Sg 0M/ Sg M/B Sg S/ Sg M/A Sg M/A , 9, 9,,, 9, 9,, 9,, 9,, 9, 9, 9, 9, , 9, 9 9, 9, 9, 0, 0, 0,9 0, 0, 0, 0, 0, 0, 0, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9,,,,,,,,,,,,9,,,,,9,,,9,,,,,,,,,,,, 0, 0, 0, 0, 0, 0,,,,,,, Two separate windings, centirfugal drive or highest at both s L L U V W U V W U V W L L
12 0/00 rpm - motors designed application rotor Weight (IMB) [rpm] p=/ N cos N I N [00V] [%] [-] [A] n s=0/00 rpm T L/TN I L/IN T b/tn J m [HP] [Nm] [-] [-] [-] [kgm ] 9. Sh -/AW 9. Sh -/BW 9. Sh 0-/A 9. Sh 0-/AW 9. Sh 0-/B 9. Sh 0-/BW 9. Sh S-/ 99. Sh S-/W 00. Sh L-/ 0. Sh L-/W 0. Sg 00L-/W 0. Sg 00L-/A 0. Sg 00L-/AW 0. Sg 00L-/B 0. Sg 00L-/BW 0. Sg M-/ 0. Sg M-/W 09. Sg M-/BW 0,0 0, 0,09 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,, 0,,,, 0,0 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 9, 0,,, 0,,,, ,,,,,,,9,,9,0,,,,,9,,, 9,,,9, 9,0,, 0, 0, 0,, ,,9 9,9,,,,,,,,,,,,, 0,,,9, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 9 0, 0, 0, 0, 0, 0, 0, 0, 0,, 0,,, 0,,,,,,9,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,0,9,9,,,,,,,,,9,,,,,,,,,,,,,,,,,,,,,,,,,,,,, 0,000 0,0009 0,009 0,009 0,000 0,000 0,00 0,00 0,00 0,00 0,009 0,00 0,00 0,009 0,009 0,0 0,0 0,0,,,,,,,,,,, 9, Highest at both s, Dahlander connection Centrifugal drive, Dahlander connection U V W L V W W L U U U V W V L L U V W U V W U V W U V W L L L L
13 0/00 rpm - motors designed application rotor Weight (IMB) N cos N I N [00V] T L/TN I L/IN T b/tn J m [HP] [rpm] [Nm] [%] [-] [A] [-] [-] [-] [kgm ] p=/ n s=0/00 rpm 0. Sg S-/. Sg S-/W. Sg S-/WB. Sg M-/. Sg M-/W. Sg M-/WB. Sg 0M-/. Sg 0M-/W. Sg 0L-/ 9. Sg 0L-/W 0. Sg 0L-/. Sg 0L-/W. Sg 00L/. Sg 00L/. Sg S/. Sg S/. Sg M/. Sg M/,,,,,,,,,,,,, 0,,9, 9,,,,,,,,, 9,, 9, 9 0, ,,,,9 0,, 9,,, 0,,9,9, 9, 9, 0,, ,,, 0, 0,,,,,,, 0,,,,,,9,,,,, 9,, 9 9, 9, 9,, 9, 9, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,,9,, 9,, 0,, 0,,, 9,,, 9,, 9, 0,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9,,,,,,,,,,,,,,,,,,,,9,,,9,,,,,,,,,,,,,,,,,,, 0,09 0,0 0,0 0,099 0,0 0,0 0,0 0,0 0,09 0,09 0, 0, 0, 0, 0, 0, 0, 0, Highest at both s, Dahlander connection Centrifugal drive, Dahlander connection Two separate winding, centrifugal drive V W L V W W U L L U V W L U U U V L W V L U V W U V W U V W U V W U V W U V W L L L L L L
14 0/00 rpm - motors designed application rotor Weight (IMB) [rpm] p=/ N cos N I N [00V] [%] [-] [A] n s=0/00 rpm T L/TN I L/IN T b/tn J m [HP] [Nm] [-] [-] [-] [kgm ]. Sg 0M/ 9. Sg 0M/ 0. Sg 0S/. Sg 0S/. Sg 0M/. Sg 0M/. Sg M/. Sg M/A. Sg M/B. Sg M/C. Sg M/C 9. Sg M/C 0. Sg M/C. Sg S/. Sg S/. Sg M/A. Sg M/A. Sg M/B. Sg M/B. Sg L/. Sg L/ ,,, 9, 9 9,, 9, 9 9, 9 9, 9, 9, , 9, 9, 9, 9, 9, 9 9, 9 9, 9, 9, 9 9,9 9, 9 9, 9 9, 9, 9, 9, 9,9 9, 9,9 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,9 0,9 0,9 0, 0,9 0, 0, 0, 0, 0, 0, 0, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,0,,,,,,,,,,,9,,9,,,,,,,,,,,9,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, Highest at both s, Dahlander connection Centrifugal drive, Dahlander connection U W V W L V W L U U U V W V L L U V W U V W U V W U V W L L L L
15 0/000 rpm - motors designed application rotor Torque Weight (IMB) N cos N I N [00V] T L/TN I L/IN T b/tn J m [HP] [rpm] [Nm] [%] [-] [A] [-] [-] [-] [kgm ] p=/ n s=0/000 rpm 9. Sh S-/W 0. Sh L-/W. Sg 00L-/AW. Sg 00L-/BW. Sg M-/. Sg M-/W. Sg S-/W. Sg M-/AW. Sg M-/BW. Sg 0L-/ 9. Sg 00L/ 0. Sg S/. Sg M/. Sg 0M/. Sg 0S/. Sg 0M/. Sg M/. Sg M/A 0, 0, 0, 0, 0,0,,,,,,0, 0 0 0, 0, 0, 0, 0, 0,,,,,9,0,,, 0, ,,9,,,0 9,,00,,9, 0,0,0, ,,,,,, 9,,,,, 9 9,9 9, 0,,,,,, , 9, 9 0, 0, 0,9 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,9 0,9 0, 0,9 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,,,,,,9,,,,9,,,, 9,,,,,,,, ,,,,,,,,0,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9,,,,,,,9,,,,9,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, 0,00 0,00 0,00 0,009 0,0 0,0 0,0 0,0 0,00 0, 0, 0,,,, 9,,,,9, Two separate windings, centirfugal drive or highest at both s L L U V W U V W U V W L L
16 00/000 rpm - motors designed application rotor Weight (IMB) N cos N I N [00V] T L/TN I L/IN T b/tn J m [HP] [rpm] [Nm] [%] [-] [A] [-] [-] [-] [kgm ] p=/ n =00/000 rpm s. Sg M-/W. PSg M-/ 9. Sg 0M-/ 0. Sg 0L-/. Sg S/. Sg M/. Sg 0S/. Sg 0M/. Sg M/. Sg M/C. Sg M/A. Sg M/B 9. Sg M/B 0,,,,,,, ,,,,,,, 0, ,9,, 0,,,,0, ,,, 0,,, 0,, 0, 9, 9, 9,, 9, 9 9, 9, 9 9, 9, 9,9 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,,,, 9,,,,,,, 00, 99 0,9,,,,,,,,,,,,,,,,,0,,,9,,,,,,,,,,,,,,,,,,,,,,,,0,,,,,,,,,,,,,,,,,,,, 0,0 0,0 0,0 0,09 0, 0,,,, 9, Highest at both s, Dahlander connection Centrifugal drive, Dahlander connection U W V W L V W L U U U V W V L L U V W U V W U V W U V W L L L L
17 Three-Speed Motors 000/00/000 rpm 0/00/000 rpm rotor Weight (IMB) N cos N I N [00V] T L/TN I L/IN T b/tn J m [HP] [rpm] [Nm] [%] [-] [A] [-] [-] [-] [kgm ] p=// n s=000/00/000 rpm 0. Sg 0M-//. Sg 0L-//,,,,,, 0,, , 0,,,,,, 0,,,, 0,9 0, 0,9 9,,,,, 0,,,,,,,,,,,,,, 0,0 0, Sg S-//. Sg 0M-//. Sg 0L-// L Medium V,,,,,, 9, U W,9,,, 9, 9,9 p=// L 9,, 9,,,, 9,,9 V U W n =0/00/000 rpm s 000/00/000 rpm: two separate windings, medium / high - Dahlander connection, highest at all s,, 9,,, 0, 0, 0, 0, 0, 0,,9,,,, 0,,,,,,,,,9,9,,,,,,,,,,,9 0,0 0,0 0, V W L U V U W U V W U V W U V W U V W U V W U V W L L L 0/00/000 rpm: two separate windings, low / medium - Dahlander connection, highest at all s Medium L V W L V W U V W L U U U V W U V W U V W U V W U V W U V W L L L
18 Three-Speed Motors 0/000/00 rpm rotor Weight (IMB) [HP] [rpm] p=// T N N cos N I N [00V] [Nm] [%] [-] [A] n s=0/000/00 rpm P N n N T L/TN I L/IN T b/tn J m [-] [-] [-] [kgm ]. Sg S-//. Sg M-//. Sg 0M-//. Sg 0L-// 9. Sg 0L-//. Sg 00L// 9. Sg S// 9. Sg M// 9. Sg 0M// 9. Sg 0S// 9. Sg 0M// 9. Sg S//,,,9,,,,,9,, ,,,,,,,,,9 9, , 9, 0,,9,,,,,,,, 0,, ,,,,, 9, 9,,,,,,,,, , 9, 9 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,9 0, 0, 0, 0, 0,,9,,,, 9, 0,, 9,9 9,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,9,,,9,,,,,9,,,,,,,,,,,,,,,,9,,,,,,,,,,9,,,,,,,9,,,,,,,,,,,,,,,,, 0,09 0,099 0,0 0,09 0, 0, 0, 0,,,, Two separate windings, low / high - Dahlander connection, highest at all s V W Medium L U V W L V W V W Medium U L V W L U U L U V L W U U V W U V W U V W U V W U V W U V W U V W U V W U V W U V W U V W U V W L L L L L L
19 Four-Speed Motors 00/00/000/00 rpm rotor Weight (IMB) 9. Sg 0M-/// 9. Sg 0L-/// 99. Sg S/// 00. Sg S///,,,9,,,9, 9 Medium-lower N cos N I N [00V] T L/TN I L/IN T b/tn J m [HP] [rpm] [Nm] [%] [-] [A] [-] [-] [-] [kgm ] p=/// n s=00/0/000/00 rpm,,,,,,, 9 0, Two separate windings, highest at all s, low / medium-higher - Dahlander connection, medium-lower / high - Dahlander connection,,,,,,, 9 Medium-higher,, 9,, 9,,,,,,, 9 9 0, 0, 0, 0, 0,,,, 9, 9, 0, 0, 9 9,,,,,,,,,,,,,,,,9,,,,,,,,,,,,,,,,, 0,0 0,09 0,, U U V W V W L V W L V W L U V W L U U V U W U V W U V W U V W U V W U V W U V W U V W U V W U V W U V W U V W U V W L L L L Performance data placed on rated plates of the motors may be different from catalogue data as a result of number roundings. 9
20 CANTONI MOTOR S.A. M. Gra yñskiego -00 Bielsko-Bia³a, Poland tel fax + 0 motor@cantonigroup.com 0/WBF-EN/0_009
We will discuss common industrial applications with guides for the proper use of electric motors on these.
INTRODUCTION: Baldor Electric Company has prepared this Specifiers Guide to help you cover all the bases when you are specifying electric motors. It will cover in a generic way most of the subjects which
RM4TG20 three-phase network control relay RM4-T - range 200..500 V
Characteristics three-phase network control relay RM4-T - range 200..500 V Complementary [Us] rated supply voltage Output contacts Setting accuracy of time delay Delay at power up Measuring cycle Marking
THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS AL SERIES
THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS AL SERIES IE2 FRAMES 80 355 0,75 315kW (1500rpm) FOR INVERTER DUTY Code Declaration of conformity The motors described in this catalogue satisfy the essential
SECTION 4 ELECTRIC MOTORS UNIT 17: TYPES OF ELECTRIC MOTORS
SECTION 4 ELECTRIC MOTORS UNIT 17: TYPES OF ELECTRIC MOTORS UNIT OBJECTIVES After studying this unit, the reader should be able to Describe the different types of open single-phase motors used to drive
Data Sheet. AC Industrial Electric Motors
Data Pack B Issued ovember 2005 1502325812 Data Sheet AC Industrial Electric Motors Standards organisations The RS-ABB range of ac induction motors is produced to common European standards, these being
MT MOTORI ELETTRICI. Installation, operation, maintenance and safety manual for motors used in hazardous areas 1-II-2G 21-II-2D
MT MOTORI ELETTRICI Installation, operation, maintenance and safety manual for motors used in hazardous areas 1-II-2G 21-II-2D TABLE OF CONTENTS 1. Introduction 2. Scope of application 3. Installation
Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated. Ordering information
Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated Ordering information Connection technique Description Description Rated operational current Screw terminals 3 pole AC
SIMOTICS Low-Voltage Motors
SIMOTICS Low-Voltage Motors 'LVWULEXWLRQ RIIHULQJ 7KLV WHFKQLFDO EURFKXUH IRFXVHV RQ D VHOHFWHG PRWRU VSHFWUXP VSHFLILFDOO\ GHILQHG IRU WKH GLVWULEXWLRQ EXVLQHVV FRYHULQJ DOO PDLQ VWDQGDUG DSSOLFDWLRQV
1 Temperature Derating Guide
VLT HVAC Drive FC 02 Application Note Temperature Derating Guide Temperature Derating Guide.. Abstract This paper provides detailed data regarding the operation of the VLT HVAC Drive FC02 at varying ambient
Unit 33 Three-Phase Motors
Unit 33 Three-Phase Motors Objectives: Discuss the operation of wound rotor motors. Discuss the operation of selsyn motors. Discuss the operation of synchronous motors. Determine the direction of rotation
PRODUCTS DC MOTORS BLPM MOTORS AC MOTORS CONTROLLERS
D R I V E S Y S T E M S PRODUCTS DC MOTORS BLPM MOTORS AC MOTORS CONTROLLERS The vision of Iskra Avtoelektrika is to be: One of the world's leading manufacturers of electric motors and controllers for
OJ L 191, 23.7.2009, p. 26. OJ L 2, 7.1.2014, p. 1.
Table of Contents 1. Purpose of the guidelines and disclaimer... 2 1.1. The Regulations... 2 2. Scope... 2 3. Historic developments... 4 4. Scope and Requirements... 5 4.1. Scope... 5 4.2. Requirements...
XFE. The cost effective starter for all AC induction motors from 4A 2800A The choice for small to medium industrial applications
The cost effective starter for all AC induction motors from 4A 2800A The choice for small to medium industrial applications The XFE Soft Starter range provides a combination of competitive prices, flexible
D.C. Motors. Products and specifications subject to change without notice.
D.C. Motors Order/Technical Support - Tel: (8) 677-5 / FAX: (8) 677-865 / www.crouzet-usa.com / DC Motors Selection guide Gearbox Speed Torque max (Nm).5. Type of Gearbox 8 8 8. Power usable (w) Torque
PM734F - Technical Data Sheet Winding 28
- Technical Data Sheet Winding 28 SPECIFICATIONS & OPTIONS STANDARDS STAMFORD AC generators are designed to meet the performance requirements of IEC EN 60034-1. Other international standards, including
Energy Saving ECM Motors and Fans. 2010 Ventilation Catalogue
Energy Saving ECM s and Fans 2010 Ventilation Catalogue CONTENTS For ellington, sustainability is about delivering products at competitive prices while preserving the environment for future generations.
How the efficiency of induction motor is measured?
How the efficiency of induction motor is measured? S. Corino E. Romero L.F. Mantilla Department of Electrical Engineering and Energy E.T.S.I.I. y T. Universidad de Cantabria Avda de Los Castros, 395 Santander
TYPE APPROVAL CERTIFICATE
DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. E-12702 This is to certify that the Electric Motor with type designation(s) RN series 56 up to 315L Manufactured by Rotor B.V. EIBERGEN, Netherlands
REVIEWED BY CAPITAL PROJECTS MANAGER (DAN REDDY) GENERAL MANAGER EQUIPMENT ENGINEERING & ASSET MANAGEMENT (HAMILTON NXUMALO)
SA Port Operations DOCUMENT TYPE: REFERENCE EEAM-Q-014 (ORIGINAL SPECIFICATION HE8.2.3 Ver5) REVISION 0 SPECIFICATION TITLE: SPECIFICATION FOR ELECTRICAL MOTORS AND GENERATORS PAGE 0 of 07 COMPILED BY
C Standard AC Motors
C Standard AC Standard AC C-1 Overview, Product Series... C-2 Constant... C-9 C-21 C-113 Reversible C-147 Overview, Product Series Constant Reversible Electromagnetic Brake C-155 Electromagnetic Brake
2. A conductor of length 2m moves at 4m/s at 30 to a uniform magnetic field of 0.1T. Which one of the following gives the e.m.f. generated?
Extra Questions - 2 1. A straight length of wire moves through a uniform magnetic field. The e.m.f. produced across the ends of the wire will be maximum if it moves: a) along the lines of magnetic flux
FAN & BLOWER CENTRIFUGAL FANS
FAN & BLOWR CNTRIFUGAL FANS INTRODUCTION GNRAL PRODUCT RANG FANS BY FANTCH - INTRACTIV PRODUCT SUIT SLCTION PROGRAM PRFORMANC CONSTRUCTION The Fan & Blower range of centrifugal fans is marketed to the
Torque motors. direct drive technology
Torque motors direct drive technology Why Direct Drive Motors? Fast and effective Direct-drive technology in mechanical engineering is defined as the use of actuators which transfer their power directly
Thermistor motor protection
Thermistor motor protection CM-E Range Thermistor motor protection Thermistor motor protection relays Benefits and advantages Selection table Operating principle and fields of application for thermistor
Equipment: Power Supply, DAI, Wound rotor induction motor (8231), Electrodynamometer (8960), timing belt.
Lab 13: Wound rotor induction motor. Objective: to examine the construction of a 3-phase wound rotor induction motor; to understand exciting current, synchronous speed and slip in this motor; to determine
Défumair XR. ventilation and cmv. fire grade - label CE. smoke-extraction fan extraction casing for kitchen at F400-120. advantages.
Défumair XR smoke-extraction fan extraction casing for kitchen at F400-120 Personalisation : - Phonic insulation version by insulated double-skin panels through 25 mm glass wool, class M1. advantages Originally
Wound Rotor Induction Motors 4-12 poles, up to 8000 kw, 11500 HP
Wound Rotor Induction Motors 4-12 poles, up to 8000 kw, 11500 HP ABB The Preferred Partner Egypt Cement Corporation, a major cement manufacturer, has chosen ABB wound rotor motors for all key applications
What Do All Those Things on an AC Motor Nameplate Mean?
What Do All Those Things on an AC Motor Nameplate Mean? Introduction: Ever order a motor on power, speed, and enclosure? PO says maybe "5 hp, 1,800 rpm, TEFC." New-motor nameplate says "HP 5, RPM 1748,
Small Coreless DC Motors
CL Series 3 to 25 W Coreless DC Motors Smooth-running, optimized-performance coreless DC motors Small Coreless DC Motors Allied Motion s CL series of small coreless DC motors provides maximized performance
NO LOAD & BLOCK ROTOR TEST ON THREE PHASE INDUCTION MOTOR
INDEX NO. : M-142 TECHNICAL MANUAL FOR NO LOAD & BLOCK ROTOR TEST ON THREE PHASE INDUCTION MOTOR Manufactured by : PREMIER TRADING CORPORATION (An ISO 9001:2000 Certified Company) 212/1, Mansarover Civil
ELECTROPUTERE ROTATING ELECTRICAL MACHINES DIVISION
ELECTROPUTERE ROTATING ELECTRICAL MACHINES DIVISION SC ELECTROPUTERE SA SC ELECTROPUTERE SA 1. Vision, Mission, Values SC ELECTROPUTERE SA 2. LOCATION Craiova: Located in the South West of the country,
BIG SAVINGS FOR A LOT MORE APPLICATIONS
MSF SOFT STARTERS BIG SAVINGS FOR A LOT MORE APPLICATIONS Soft Starters from Emotron Unique features built into Emotron MSF Soft Starters reduce costs significantly for many more applications when compared
Three-phase monitoring relay CM-PFE
Data sheet Three-phase monitoring relay CM-PFE The CM-PFE is a three-phase monitoring relay that monitors the phase parameter phase sequence and phase failure in three-phase mains. 2CDC 251 005 S0012 Characteristics
BMD. Permanent Magnet AC Synchronous Motors
BMD Permanent Magnet AC Synchronous Motors Power, control and green solutions About us 3 Bonfiglioli, one name for a large international group. It was back in 1956 that Clementino Bonfiglioli established
CRN32-2-2 A-F-G-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRN32-2-2 A-F-G-E-HQQE 3x4D 5 HZ Grundfos Pump 96122352 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn32/96122352/crn-32-2-2-a-f-g-e-hqqe.html
US Breaker Brand 3 Pole AC Contactors (Square D Telemecanique LC1 Replacements)
4 NC1 D09-D18 NC1 -D32 US Breaker Brand 3 Pole AC Contactors (Square D Telemecanique LC1 Replacements) Standards: UL508, CSA C22.2, IEC 60947, and CE Marked Integral DIN Rail & Base Mounting in One Compact
MOTOR CONTROL IS OUR NATURE
MOTOR CONTROL IS OUR NATURE profile Founded in 1977, Solcon Industries Ltd. is a dynamic Power Electronics Company that develops, manufactures and manages worldwide product sales all under one roof. Our
2CP. Twin-impeller pumps PERFORMANCE RANGE INSTALLATION AND USE APPLICATION LIMITS OPTIONALS AVAILABLE ON REQUEST CONSTRUCTION AND SAFETY STANDARDS
2CP Twin-impeller pumps PERFORMANCE RANGE Flow rate up to 40 l/min (27 m³/h) Head up to 112 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +90 C Ambient temperature
Water-cooled three-phase asynchronous motors. Type series K21B / K23B
Water-cooled three-phase asynchronous motors Type series K21B / K23B Contents Page Introduction 3 Standards and regulations 4 Design version 4 Water cooling 5 Degree of protection 5 Drain holes 5 Vibration
Baldor Electric Position on DOE Small Motor Rule
Baldor Electric Position on DOE Small Motor Rule WP0035 WP0034 Page 1 of 6 US Integral DOE Small HP Motor Rule Rule Baldor Electric Position on DOE Small Motor Rule 10/28/14 On March 9, 2010 the US Department
ICQ Series - square centrifugal
product ICQ Square Centrifugal (TEFC) dimensions mm 280-710 poles & duty 4-8 / up to 4,500 L/s application High performance centrifugal fans for medium to high pressure ducted systems. ICQ Series The ICQ
Product Description Full Voltage Starting Electric Fire Pump Controllers FTA1000
Product Description Full Voltage Starting Electric Fire Pump Controllers FTA1000 Description Firetrol FTA1000 Full Voltage Fire Pump Controllers are intended for use with electric motor driven fire pumps
Specifying a Variable Frequency Drive s
Specifying a Variable Frequency Drive s Put on by Bruce Reeves and Jeremy Gonzales Dykman Electrical Covering the Western US For all of your VFD and Soft Start and Motor Needs How To Specify a Variable
ENERGY-SAVINg DRIVE PACKAGE DE ES FR IT. Overview
ENERGY-SAVINg DRIVE PACKAGE SPriPM Motor & YASKAWA V1000 Inverter Drive EN DE ES FR IT Overview - Super Premium IPM Motor & YASKAWA V1000 Inverter Drive The Motor-Inverter Package was developed to support
CRK 2-130 A-W-A-BUBV 85805906
GRUNDFOS DATA BOOKLET CRK 2-13 A-W-A-BUBV 858596 Grundfos Pump 497113 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crk2/497113/crk-2-13-13-a-w-a-auuv.html
ELECTROMAGNETIC DISC BRAKES
ELECTROMAGNETIC DISC BRAKES TYPE 66E 15/30 52.121 Hand release Lining wear adjustment Torque adjustment 4 holes ø13 DISC SIZE Ø A Braking torque Nm Regulated from (40-100%) Reaction on the shaft N Control
Application Information
Moog Components Group manufactures a comprehensive line of brush-type and brushless motors, as well as brushless controllers. The purpose of this document is to provide a guide for the selection and application
Introduction. Upon completion of Basics of AC Motors you should be able to:
Table of Contents Introduction...2 AC Motors...4 Force and Motion...6 AC Motor Construction... 12 Magnetism... 17 Electromagnetism... 19 Developing a Rotating Magnetic Field...24 Rotor Rotation...29 Motor
32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 113 kva, 90 kw 124 kva, 99 kw 6WDQGE\ 114 kva, 91 kw 125 kva, 100 kw
![32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 113 kva, 90 kw 124 kva, 99 kw 6WDQGE\ 114 kva, 91 kw 125 kva, 100 kw](/thumbs/30/14614129.jpg "32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 113 kva, 90 kw 124 kva, 99 kw 6WDQGE\ 114 kva, 91 kw 125 kva, 100 kw")
,1'8675,$/#*(16(7 6HULHV#'9#448 32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 113 kva, 90 kw 124 kva, 99 kw 6WDQGE\ 114 kva, 91 kw 125 kva, 100 kw Generator set consisting of engine and alternator mounted
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60076-1 Edition 2.1 2000-04 Edition 2:1993 consolidated with amendment 1:1999 Power transformers Part 1: General This English-language version is derived from the original bilingual
Motor Specifications. Nameplate
Motor Specifications Nameplate The nameplate of a motor provides important information necessary for selection and application. The following drawing illustrates the nameplate of a sample 30 horsepower
Permanent Magnet DC Motors
typical applications Robotics and factory automation Pick-and-place robots Positioning tables Welding wire feeders Automatic guided vehicles Barcoding equipment Computer and office equipment Copier and
Thermistor motor protection relays CM-MSS.22 and CM-MSS.23
Data sheet Thermistor motor protection relays CM-MSS.22 and CM-MSS.23 The thermistor motor protection relays CM-MSS.22 and CM-MSS.23 monitor the winding temperature of motors and protect them from overheating,
SYNCHRONOUS MACHINES
SYNCHRONOUS MACHINES The geometry of a synchronous machine is quite similar to that of the induction machine. The stator core and windings of a three-phase synchronous machine are practically identical
AF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101403D0201 24/03/11 AF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals AF09(Z) contactors are used for controlling power circuits
HCM434F - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
HCM434F - Winding 311 Technical Data Sheet HCM434F SPECIFICATIONS & OPTIONS STANDARDS Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd or RINA. Other standards
PPA & PPC series motors High specification cast iron units
Edition 4 Issue 3 PPA & PPC series motors High specification cast iron units Accreditation No. 14396 SOLUTIONS, not just products Specialists in Electric Motors, Geared Motors & AC Drives At CMG we offer
Modelling, Simulation and Performance Analysis of A Variable Frequency Drive in Speed Control Of Induction Motor
International Journal of Engineering Inventions e-issn: 78-7461, p-issn: 319-6491 Volume 3, Issue 5 (December 013) PP: 36-41 Modelling, Simulation and Performance Analysis of A Variable Frequency Drive
Basic Nameplate Information
Basic Nameplate Information General Information: Most equipment nameplates will have some common items of information. Many of these are self explanatory, and include: Manufacturer Manufacturerʼs address
Air damper actuators
4 634 OpenAir TM Air damper actuators GDB...1 GLB...1 Rotary version, / AC 230 V Electronic motor driven actuators for three-position and modulating control Nominal torque 5 Nm (GDB), 10 Nm (GLB) Mechanically
Offshore Platform Powered With New Electrical Motor Drive System
Offshore Platform Powered With New Electrical Motor Drive System Authors: Jan O. Lamell, M.Sc E.E. ABB Automation Technologies Presenters: Thomas Johansson, M.Sc E.E. ABB Automation Technologies Timothy
Electronic, Digital and Mechanical Vibration Switches
PT500 Electro-Mechanical Vibration Switch Introduction The PT500 is an economical solution that provides basic vibration protection for rotating reciprocating machines. The PT500 uses an inertia sensitive
TERMINAL MARKINGS AND CONNECTIONS PART WINDING START
TERMINAL MARKINGS AND CONNECTIONS PART WINDING START NEMA NOMENCLATURE 6 LEADS 7 7 3 9 8 Delta 3 9 8 Wye OPER. 9 MODE L L L3 OPEN 7 START 3 7,8,9 T T T3 T7 T8 T9 RUN,7,8 3,9 3 8 MOTOR LEADS 3 7 Double
Absolute Rotary Encoder E6CP
Absolute Rotary Encoder Absolute Rotary Encoders with Gray Code Output Gray code output decreases output errors Lightweight plastic housing Used with Omron s H8PS Cam Positioner, this encoder detects the
CRN5-5 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN5-5 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96517184 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn5/96517184/crn-5-5-a-fgj-g-e-hqqe.html
Equipment: Power Supply, DAI, Synchronous motor (8241), Electrodynamometer (8960), Tachometer, Timing belt.
Lab 9: Synchronous motor. Objective: to examine the design of a 3-phase synchronous motor; to learn how to connect it; to obtain its starting characteristic; to determine the full-load characteristic of
Plug and Socket Devices CES 63 A Series 8579
www.stahl.de > Switch socket / plug 63 A > Large switch handle with clear switch position indication padlockable in 0- and I-position > Low insertion and withdrawal forces through individually encapsulated
ANCILLARY EQUIPMENT AND ELECTRICAL EQUIPMENT Power Supply Systems and Electrical Equipment for Desalination Plants - Y.M. Hamud and A.H.
POWER SUPPLY SYSTEMS AND ELECTRICAL EQUIPMENT FOR DESALINATION PLANTS Y.M. Hamud and A.H. Anwar Abu Dhabi Water and Electricity Authority, Abu Dhabi, UAE Keywords : Electrical System, Network for Desalination,
Electric Motors. Technical catalogue. Low-voltage squirrel-cage motors. 3.1 e
Electric Motors Technical catalogue Low-voltage squirrel-cage motors 3.1 e 2002 All technical data, outputs, dimensions and weights stated in this catalogue are subject to change without prior notice.
Technical Specification. Generating Set with Waukesha engine burning natural gas
Technical Specification Generating Set with Waukesha engine burning natural gas The following presents the Gas Engine Generating Set (GEGS) APG1000 type, based on Waukesha gas engine 16V150LTD. Using the
3790 en - 06.2007 / d. Alternators LSA 46.2-4 Pole. Electrical and mechanical data
379 en - 6.7 / d Alternators LSA 46.2-4 Pole Electrical and mechanical data SPECIALLY ADAPTED FOR APPLICATIONS The LSA 46.2 alternator is designed to be suitable for typical generator applications, such
ELEKTROTEHNI KO PODJETJE Leskoπkova cesta 12, 1000 Ljubljana, SLOVENIA
MRO Modularne Razdelilne Omare d.o.o. ELEKTROTEHNI KO PODJETJE Leskoπkova cesta 2, 000 Ljubljana, LOVENIA MC GENERAL When to use? MC - modular switchgear cabinets are type-tested, factory built switchgears,
SBL/K Motor Catalogue 2002
SBL/K Motor Catalogue 2002 Brushless Servomotors up to 32Nm Motor Technology Ltd. Motec House Chadkirk Ind. Est. Romiley Stockport Cheshire SK6 3LE England Tel. +44(0)161 427 3641 Fax. +44(0)161 427 1306
RoHS. Shock / vibration resistant. Magnetic field proof. Many variants
Sendix 5000 / 500 (Shaft / Hollow shaft) Push-Pull / RS4 ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors.
Thermal-Magnetic Circuit Breaker 3120-...-M1-..
Thermal-Magnetic Circuit Breaker -...-M-.. Description Single or two pole rocker switch/thermal-magnetic circuit breaker with trip-free mechanism (S-type TM CBE to EN 34). The addition of a magnetic tripping
SPEED CONTROL SYSTEM
SPEED CONTROL SYSTEM INDEX SPEED CONTROL MOTOR FEATURES 144 6W ( 70mm) 153 10W ( 70mm) 155 15W ( 80mm) 157 25W ( 80mm) 159 40W ( 90mm) 161 SPEED CONTROL W ( 90mm) 163 90W ( 90mm) 165 120W ( 90mm) 168 180W
Principles of Adjustable Frequency Drives
What is an Adjustable Frequency Drive? An adjustable frequency drive is a system for controlling the speed of an AC motor by controlling the frequency of the power supplied to the motor. A basic adjustable
Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx
Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx DSF..10.**.HV Ex ATEX Operating Instructions 374E-64368 Valid from lot nr. 0103 General Function Use in potentially explosive environment
AC Replacement for DC Mill-Duty Motors
AC Replacement for DC Mill-Duty Motors This article is available online at www.aist.org for 30 days following publication. For many years, DC mill auxiliary motors for steel mill applications such as screwdowns,
S Y N C H R O N O U S G E N E R A T O R S
S E R I E S SYNCHRONOUS G E N E R A T O R S INDAR SYNCHRONOUS GENERATORS S E R I E S BZK INDAR ELECTRIC INDAR, EXPERIENCE AND COOPERATION INDAR Electric develops and manufactures electrical rotating machines
Speed Control Relays SX2
SX2 File 850 CONENS Description.....................................................Page General Information................................................ 2-3 SX2DV General Information...........................................
TABLE OF CONTENTS INTRODUCTION...3 ADVANTAGES...5 OPERATION CHARACTERISTICS...6 EXCITATION TYPES...8 CONSTRUCTIVE COMPONENTS...9 ACCESSORIES...
SYNCHRONOUS MOTORS TABLE OF CONTENTS Motores Síncronos INTRODUCTION...3 ADVANTAGES...5 OPERATION CHARACTERISTICS...6 EXCITATION TYPES...8 CONSTRUCTIVE COMPONENTS...9 ACCESSORIES...11 CONSTRUCTIVE CHARACTERISTICS...12
DLW 8. POWER RATING 1500 rpm/50 Hz 1800 rpm/60 Hz Prime 7.5 kva, 6 kw 9.1 kva, 7.3 kw Standby 8.5 kva, 6.8 kw 10.1 kva, 8.1 kw
DLW 8 POWER RATING 1500 rpm/50 Hz 1800 rpm/60 Hz Prime 7.5 kva, 6 kw 9.1 kva, 7.3 kw Standby 8.5 kva, 6.8 kw 10.1 kva, 8.1 kw Generator set consisting of engine and alternator mounted on a fabricated steel
49 Series - Relay interface modules 8-10 - 16 A. Features
Features 1 & 2 Pole relay interface modules 5 µm Gold plate contacts for low level switching capability 49.31-50x0-1 Pole 10 A (screw terminal) 49.52-50x0-2 Pole 8 A (screw terminal) 49.72-50x0-2 Pole
System 8. ü www.nassmagnet.com ( +49 511 6746-0. System 8
System 8 ü www.nassmagnet.com ( +9 11 7-0 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures
IP40 or IP64 (EN 60529) Protection class housing. IP50 (IP65 optional) (EN 60529) Minimum length of mountig
Through hollow shaft Ø 5 bis 4 mm Outside diameter only 76 mm Easy installation by means of clamping ring front or rear Operating temperature up to 00 C Applications: motors, printing machines, lifts NUMBER
"AC2EC" - Replacement made easy New EC motor design Compact and efficient
"AC2EC" - Replacement made easy New EC motor design Compact and efficient The efficiency of the fans used is a central issue in ventilation and airconditioning technology. This is encouraged not only by
Fundamentals of Inverter Fed Motors
Fundamentals of Inverter Fed Motors Technical Manual 10/02 MN780 Contents Page The Growing Use Of Inverters.................................................................. 1 How Inverters Affect Motors....................................................................
AND8008/D. Solid State Control Solutions for Three Phase 1 HP Motor APPLICATION NOTE
Solid State Control Solutions for Three Phase 1 HP Motor APPLICATION NOTE INTRODUCTION In all kinds of manufacturing, it is very common to have equipment that has three phase motors for doing different
Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592. * see variants. Applications.
Safety Technique SAFEMASTER Emergency Stop Module BG 5924, IP 5924 Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592 BG 5924 IP 5924 Product Description
O-I DUBI PLANT FANS Quotation Spec Data & Specifications
TECHNICAL DATA O-I DUBI PLANT FANS Quotation Spec Data & Specifications 1 page for the global informations + 12 pages for the fans data Revision 2 end april Global informations: These fans are a replacement
Your professional Partner also for special Miniseries & special Series.
Your professional Partner also for special Miniseries & special Series. Your professional Partner also for special Miniseries and special Series. / Page 1 Company Profile ABM Greiffenberger One of the
TorqPlus TM Electric Valve Actuators and Controls
TorqPlus TM Electric Valve Actuators and Controls Torque 150 IN/LB 600 IN/LB The Engineered Solution Bettis TorqPlus quality line of electric actuators are designed for quarter turn applications ball,
Manual motor starter MS116
Data sheet Manual motor starter MS116 Manual motor starters are electromechanical devices for motor and circuit protection. These devices offer local motor disconnect means, manual ON/ OFF control, and
BCI184E - Technical Data Sheet
BCI184E - Technical Data Sheet BCI184E SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
Know-how makes the difference. Electrical Actuators
Know-how makes the difference Electrical Actuators With Dansk Ventil Center as your business partner, you are always guaranteed a wide and well sorted product range and a unique technical know-how Product
Output torques up to 8000 Nm. General features. Protection. External coating. Working temperature range
Type series booklet 8521.15/2--10 ACTELEC 31 to 800 (BERNARD) 1/4 turn electric actuators (irreversible reducer with multi -turn electric actuator ACTELEC 31: screw -nut kinematics ACTELEC 200 to 800:
FREQUENCY CONTROLLED AC MOTOR DRIVE
FREQUENCY CONTROLLED AC MOTOR DRIVE 1.0 Features of Standard AC Motors The squirrel cage induction motor is the electrical motor motor type most widely used in industry. This leading position results mainly
Electric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
Technical Guide No. 100. High Performance Drives -- speed and torque regulation
Technical Guide No. 100 High Performance Drives -- speed and torque regulation Process Regulator Speed Regulator Torque Regulator Process Technical Guide: The illustrations, charts and examples given in